Qty: 1B lm/9.2W per foot 1B30 1,2. 1B25 1,2 553lm/6.8W per foot. per foot K. A2 LMO Asymmetric 20 Wall Washer VM 6 Matte Silver Louver

Transcription

1 Date: Customer: Project: Type: Qty: M36 Order Code: L L36 Series L36 M36 Light Engine B45,,3 908lm/.8W per foot B40,,3 8lm/0.5W per foot B35 7lm/9.W per foot B30, 67lm/7.7W per foot B5, 553lm/6.8W per foot B0, 47lm/5.W per foot Values calculated from a 4 using LW Shielding and DIM driver. For additional information please see page. Available starting at and up. 3 Not available with Lutron. CCT K 3000K K K Shielding LW MI LED Optimized Clear Lens white lens w/microprism LU 4,5 Light Up Lens DR 4,5 Drop Lens NB LMO Symmetric VC 6 Specular Louver A LMO Asymmetric 0 Wall Washer VM 6 Matte Silver Louver A5 BW LMO LMO Batwing Asymmetric 5 Wall Grazer VB 6 Matte Black Louver VW 6 Matte White Louver 4 Not available with sensors 5 I ndividual fixtures only. For Runs and Configurations, please consult factory. See page 8 for details. 6 Not available with IL90, V90, or IX90 Configurations. Mounting C Cable S Swivel Stem RS Rigid Stem W 7 Wall Mount FF 8 Surface Mount (w/ Flex Whip) Nominal Fixture Length 0 * ft. 0 ft ft ft ft ft ft ft ft. 0 0 ft. * fixture only available with B35 light engine Individual fixtures, Runs and Configurations are supplied in nominal lengths to ensure full, even, illumination. See pages thru 6 for additional details. F 8 F4 8 Surface Surface Mount Mount (w/4x4 J-Box cover) (for x4j-box) ft. ft. XX Runs (over ) & Configurations, round up to the nearest foot and replace the xx with the # (i.e. 3=3 nominal) 7 Consult factory for lengths under 8 Over 8 supplied with or more housings that are joined in the field. Finish Driver Fixture Options WH White Voltage 0 0 Volt DIM 9 0-0V (Linear) DL 3 Damp Location Rated BK Black Volt DM 9,0 eldoled SOLOdrive 0-0V (Linear) FS 3 In-line Fuse BL Semi-Matte Black DML 9,0 eldoled SOLOdrive 0-0V (Logarithmic) SS 3 Separate Switching SV Silver UNV thru Volt 50/60hz capable (consult factory) DMD 9,0 eldoled DALI (Logarithmic) SP Specify Premium Color DC 9,0, Lutron -Wire DC3 9,0 Lutron 3-Wire Custom colors are available, Please consult factory DCE 9,0 Lutron Eco- System DC5 SR 9,0, Lutron 5-Series Philips (consult factory) Xitanium SR DALI 9 See page 7 for full details 0 Not available for length 0V only For use with E and P sensors only 3 See page 8 for full details and restrictions Sensor Options xe 4,5 Enlighted Replace x with quantity xp 4,5 Philips Daylight xp 4,5 Philips Occ/Vac xp3 4,5 Philips Occ/Vac/ Daylight xs 4,6 Sensor Switch Daylight xs 4,6 Sensor Switch Occ/Vac xs3 4,6 Sensor Switch Occ/Vac/ Daylight xsn nlight Enabled (consult factory) 4 Minimum fixture length. See page 9 for full details and restrictions. 5 For use with SR driver only 6 For use with DIM driver only Emergency Options Configuration Options EC 7 Emergency Circuit Wiring IL90 8 Lit Horizontal 90 Corner EMR EM Remote Micro Internal EM Inverter Battery Pack (consult factory) (consult factory) V90 8 Lit Inverted 90 Corner IT90 8 Lit T section IX90 8 Lit X section 7 See page 8 for full details and restrictions 8 See page 0 for full details and restrictions 5YEAR LED WARRANTY ARRA Compliant ADA Compliant Page of 4

2 LMO Lens LW lens shown for reference Drop Lens Light Up Lens Louver 3 /6 (7mm) 5 /6 (34mm) 7 /6 (37mm) 7 /6 (37mm) /4 (6mm) DIFFUSER LOUVER Construction: Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to ) or Runs. Geartray - Low copper 6063-T6 extruded aluminum profile. Shielding - Extruded, impact resistant acrylic lens: - LED optimized white lens (LW) - Clear lens with microprism inlay (MI) - LMO symmetric lens (NB) - LMO Asymmetric 5 wall grazer (A5) - LMO Asymmetric 0 wall washer (A) - LMO Batwing (BW) - LED optimized Light Up Lens (LU) - LED optimized Drop Lens (DL) - Louvers: (VC) Specular, (VM) Matte Silver, (VB) Matte Black, (VW) Matte White - LMO refers to the Selux proprietary LED optical system - Light Modulation Optics. Mounting(s) - /6 Aircraft Cable, Ø/ Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages 3 thru 6 for details). ** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If symmetrical suspensions are required please consult the factory. Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Configurations are available in approximately / increments starting at the nominal fixture length. ** Individual luminaires are not joinable in the field. Exact length luminaires - Individual luminaires, Runs, and Configuration are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length luminaires. M36 Joiner(s) - Runs and Configurations are supplied in multiple housing that are joined together in the field using the supplied M36 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail). Weight -.8 lb per foot Electrical/Performance: LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 96% at 5,000 hours and 93% at 60,000 5ºC per TM- reports. Reported L70 greater than 60,000 hours. Delivered Lumens - Due to LED manufacturer s tolerances the listed output has a ±5% tolerance. For outputs based on different shielding or CCT please see photometry section at the end. CCT - Available in 700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse. CRI - Min. 90. All Drivers - High efficiency, constant current, soft start, Electronic Class with a PFC > For more detailed information on the available drivers please see page 7. Sensors - Selux offers a variety of integral sensor options. For details and specifications, please refer to page 9. Thermal Performance: Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35 C (95 F) for all drivers. Luminaires are suitable for minimum ambient temperatures of: -40ºC (-40ºF) for DIM, DM, DML, and DMD drivers. -0ºC (-4ºF) for SR drivers. 0ºC (3ºF) for DC, DC3, and DCE drivers. Luminaire Finish: Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI. All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. Standard interior colors are White (WH), Black (BK), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Warranty: 5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M36 series LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see Selux Terms and Condition of Sale. Certifications and Compliance: NRTL - For Dry and Damp location (I.E. culus; ccsaus) ADA Compliant ARRA Compliant RoHS Compliant Page of 4

3 Cable Mounting (C) Cable Mounting (C) Cable Mounting (C) - Dimensions. Ø /6 Aircraft Cable with chrome gripper for easy adjustment (48 max. from ceiling to luminaire). Nominal Length A Housing Length * B (Ref.) End Suspensions C Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 0 ( ft.) ' - 5/6" 33 0' - /8" 54 0'- 8 /8" 06 0' - /8" 9 0 ( ft.) ' - /4" 66 0' - /8" 54 '- 8 /6" 509 0' - /8" 9 03 (3 ft.) 3' - 5/6" 93 0' - 3 /8" 79 '- 6 /6" 764 0' - /8" (4 ft.) 4' - /4" 5 0' - 3 /8" 79 3'- 6" 067 0' - /8" (5 ft.) 4' - 0 /6" 49 0' - 3 /8" 79 4'- 4 7/6" 33 0' - /8" (6 ft.) 5' - 0 5/8" 794 0' - 3 /8" 79 5'- 4 7/6" 636 0' - /8" (7 ft.) 7' - /4" 40 0' - 3 /8" 79 6'- 6" 98 0' - /8" (8 ft.) 8' - /4" 444 0' - 3 /8" 79 7'- 6" 86 0' - /8" (9 ft.) 8' - 0 5/8" 709 0' - 3 /8" 79 8'- 4 7/6" 55 0' - /8" 54 0 (0 ft.) 9' - 0 5/8" 303 0' - 3 /8" 79 9'- 4 3/8" 854 0' - /8" 54 ( ft.) ' - 3/6" ' - 3 /8" " 300 0' - /8" 54 ( ft.) ' - 3/6" 366 0' - 3 /8" 79 '- 5 5/6" ' - /8" 54 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. L36 Cable (C) Suspension Detail (Feed location(s) only) L36 Cable (C) Suspension Detail (Non-Feed location(s) only) Outlet box for feed only (by others) Cross bar with /4-0 rod and ground screw x Outlet box screws (by others) /4 x 5 diameter canopy (white) Cord strain relief bushing /4-0 Slip ring coupler Feed cord (white) /6 Aircraft cable x White cable stay Chrome gripper Luminaire Min. 5/8 to Max. 3/4 /4-0 Threaded Rod (supplied & installed in the field by others) /4 x diameter Canopy (white) /4-0 Slip ring coupler /6 Aircraft cable Chrome gripper Luminaire Page 3 of 4

4 Stem Mounting (S & RS) Stem Mounting (S & RS) Nominal Length Swivel (S) & Rigid Stem (RS) Mountings - Dimensions A Housing Length * B (Ref.) End Suspensions C Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 0 ( ft.) '- 5/6" 33 0' - /8" 54 0'- 8 /8" 06 0' - /8" 54 0 ( ft.) '- /4" 66 0' - /8" 54 '- 8 /6" 509 0' - /8" (3 ft.) 3'- 5/6" 93 0' - 3 /8" 79 '- 6 /6" 764 0' - 3 /8" (4 ft.) 4'- /4" 5 0' - 3 /8" 79 3'- 6" 067 0' - 3 /8" (5 ft.) 4'- 0 /6" 49 0' - 3 /8" 79 4'- 4 7/6" 33 0' - 3 /8" (6 ft.) 5'- 0 5/8" 794 0' - 3 /8" 79 5'- 4 7/6" 636 0' - 3 /8" (7 ft.) 7 - /4" 40 0' - 3 /8" 79 6'- 6" 98 0' - 3 /8" (8 ft.) 8'- /4" 444 0' - 3 /8" 79 7'- 6" 86 0' - 3 /8" (9 ft.) 8'- 0 5/8" 709 0' - 3 /8" 79 8'- 4 7/6" 55 0' - 3 /8" 79 0 (0 ft.) 9'- 0 5/8" 303 0' - 3 /8" 79 9'- 4 3/8" 854 0' - 3 /8" 79 ( ft.) '- 3/6" ' - 3 /8" " 300 0' - 3 /8" 79 ( ft.) '-3/6" 366 0' - 3 /8" 79 '- 5 5/6" ' - 3 /8" 79 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance.. Ø / Swivel Stem provides 45 swivel and can be cut in field (48 max. from ceiling to luminaire).. Ø / Rigid Stem is fixed and is not able to be cut/adjusted in field (48 max. from ceiling to luminaire). L36 Swivel Stem (S) Suspension Detail (feed wires through stem supplied by Selux) L36 Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by Selux) Outlet box (supplied & installed by others) Hemispherical assembly Cotter pin /4 IP Swivel crossbar with ground screw 3/4 x 5 diameter canopy (white) /4 IP steel swivel stem (white) 3/8 Male x /4 Male hex bushing Luminaire Outlet box (supplied & installed by others) /4 IP Crossbar with ground screw /4 IP Hex nut /4 x 5 diameter canopy (white) Canopy securing screw (white) /4 IP Steel rigid stem (white) 3/8 Male x /4 Male hex bushing Luminaire Page 4 of 4

5 Wall Mounting (W) Nominal Length A Housing Length Wall (W) Mount - Dimensions * B (Ref.) End Suspensions C Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 0 ( ft.) ' - 5/6" 33 0' - 6 3/6" 57 N/A 0' - 6 3/6" 57 0 ( ft.) ' - /4" 66 0' - 3 /8" 79 ' - 6 /6" 458 0' - 3 /8" (3 ft.) 3' - 5/6" 93 0' - 6 /8" 56 ' - /8" 6 0' - 6 /8" (4 ft.) 4' - /4" 5 0' - 6 /8" 56 3' - 0" 94 0' - 6 /8" (5 ft.) 4' - 0 /6" 49 0' - 6 /8" 56 3' - 0 7/6" 80 0' - 6 /8" (6 ft.) 5' - 0 5/8" 794 0' - 6 /8" 56 4' - 0 7/6" 484 0' - 6 /8" (7 ft.) 7' - /4" 40 0' - 6 /8" 56 6' - 0" 89 0' - 6 /8" (8 ft.) 8' - /4" 444 0' - 6 /8" 56 7' - 0" 33 0' - 6 /8" (9 ft.) 8' - 0 5/8" 709 0' - 6 /8" 56 7' - 0 7/6" 398 0' - 6 /8" 56 0 (0 ft.) 9' - 0 5/8" 303 0' - 6 /8" 56 8' - 0 3/8" 70 0' - 6 /8" 56 ( ft.) ' - 3/6" ' - 6 /8" 56 9' - 5/6" ' - 6 /8" 56 ( ft.) ' - 3/6" 366 0' - 6 /8" 56 0' - 7/8" ' - 6 /8" 56 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. Wall Mount (W) (Covers a x4 J-Box only) 3 /4 (70mm). Aluminum wall bracket (by Selux). x 4 J-Box at feed location (supplied and installed by others). 3. /4-0 Threaded rod, /4-0 lock washer and /4-0 nut required to anchor the wall bracket. Mounting hardware supplied and installed to code by others. 4 (0mm) (5mm) 7 /6 (6mm) Page 5 of 4

6 Surface Mounting (FF, F & F4) - to 8 Surface Mounting (FF, F & F4) - Over 9 Nominal Length A Housing Length * B (Ref.) End Suspensions Surface Mount (FF, F, & F4) - Dimensions * B End Suspensions C Mid. Suspension C Mid. Suspension C Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 0 ( ft.) ' - 5/6" 33 0' - 5/8" 4 N/A 0' - 9 /8" 3 N/A N/A 0' - 4 /8" 05 0 ( ft.) ' - /4" 66 0' - 5/8" 4 N/A ' - 9" 534 N/A N/A 0' - 4 /8" (3 ft.) 3' - 5/6" 93 0' - 6 /8" 56 N/A ' - /8" 6 N/A N/A 0' - /8" (4 ft.) 4' - /4" 5 0' - 6 /8" 56 N/A 3 94 N/A N/A 0' - /8" (5 ft.) 4' - 0 /6" 49 0' - 6 /8" 56 N/A 3' - 0 7/6" 80 N/A N/A 0' - /8" (6 ft.) 5' - 0 5/8" 794 0' - 6 /8" 56 N/A 3' 94 ' - 0 3/8" 569 N/A 0' - /8" (7 ft.) 7' - /4" 40 0' - 6 /8" 56 N/A 3' 94 3' 94 N/A 0' - /8" (8 ft.) 8' - /4" 444 0' - 6 /8" 56 N/A 3' 94 4' 9 N/A 0' - /8" (9 ft.) 8' - 0 5/8" 709 0' - 6 /8" ' - 0 7/6" 80 N/A 3' 94 0' - /8" 54 0 (0 ft.) 9' - 0 5/8" 303 0' - 6 /8" ' 94 ' - 0 3/8" 569 3' 94 0' - /8" 54 ( ft.) ' - 3/6" ' - 6 /8" ' 94 3' 94 3' 94 0' - /8" 54 ( ft.) ' - 3/6" 366 0' - 6 /8" ' 94 4' 9 3' 94 0' - /8" 54 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. Surface Mount (FF)* (with Flex Whip) Surface Mount (F) (with x4 J-Box cover) Surface Mount (F4) (with 4x4 J-Box cover) * Please note: Fixture does not cover a J-Box.. 6 Flex Whip. Ø 5/6 Mounting hole drilled at the factory(mounting hardware to code by others). 3. x 4 J-Box at feed location (supplied and installed by others). 4. x 4 J-Box cover (by Selux) x 4 J-Box at feed location (supplied and installed by others) x 4 J-Box cover (by Selux). Page 6 of 4

7 Drivers: 0-0V linear dimming (DIM) Luminaires supplied with drivers offering the capability of either normal switched operation of 0-0V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to %. (Due to size constraints, luminaires are supplied with a driver from a different manufacturer than and above luminaires. For details, please consult factory). eldoled SOLOdrive 0-0V linear dimming (DM) Luminaires supplied with SOLOdrive 0-0V dimming driver for linear dimming curve. Minimum dimming level preset at factory to %. For dim to dark (down to 0.%), please consult factory. eldoled SOLOdrive 0-0V logarithmic dimming (DML) Luminaires supplied with SOLOdrive 0-0V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to %. For dim to dark (down to 0.%), please consult factory. eldoled SOLOdrive DALI dimming (DMD) Luminaires supplied with SOLOdrive DALI dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to %. For dim to dark (down to 0.%), please consult factory. * For control recommendations for eldoled drivers, please consult eldoled. LUTRON -wire dimming (DC) Luminaires supplied with Hi-Lume -wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to %. LUTRON 3-wire dimming (DC3) Luminaires supplied with Hi-Lume 3-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to %. LUTRON Ecosystem dimming (DCE) Luminaires supplied with Hi-Lume EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to %. * For control recommendations and system layout for Lutron drivers, please contact Lutron. Philips Xitanium Sensor Ready DALI dimming (SR) Luminaires supplied with Xitanium SR dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 5%. For use with E and P sensors only. Driver Quantity ft. ft. 3 ft. 4 ft. 5 ft. 6 ft. 7 ft. 8 ft. 9 ft. 0 ft. ft. ft. RUN DIM, DM, DML, DMD, and SR drivers 3 3 Approximately driver per 4 ft. DC, DC3, & DCE drivers N/A Consult Factory *For inrush and control current, please refer to the driver manufacturers spec sheets. Wiring Diagrams Sensor Wiring Diagrams 0-0V linear (DIM) 0-0V linear eldoled SOLOdrive (DM) 0-0V logarithmic eldoled SOLOdrive (DML) DALI eldoled SOLOdrive (DMD) Philips SR DALI (SR) DIM, DM, DML, DMD & SR DALI DALI standard ENLIGHTED OR PHILIPS SENSOR SR (+) SR (-) PHILIPS XR SENSOR SWITCH ELDO 0-0V (+) (-) 0-0V AUX (+) AUX (-) Page 7 of 4

8 Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse). Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing. Separate Switching (SS) - Luminaires available with separately switched 4 (nominal) sections starting at 7 and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use). - To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order. *If the project requires different separate switching than outlined above please consult the factory. *For Separate Switching with sensors, please consult factory. *For Damp Location with sensors, please consult factory. Emergency Circuit (EC) - Luminaires with EC option compliant to UL 94 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use. - For to 6 nominal luminaires, the entire fixture is wired for operation on emergency circuit. - For 7 and up nominal luminaires, the first 4 nominal length is wired for operation by a separate EM circuit by default to meet the required Life Safety Code (NFPA 0). *If a different configuration is needed please consult the factory. *For EC with sensors, please consult factory. Flex Whip - standard for FF mounting Joiner System - standard for Runs and Configurations Fixture extrusion 90 Elbow on top of the housing (7/8" feed hole) 3/8" flexible metal conduit (6' long) Fixture extrusion Recommended # Phillips drive Joiner extrusion 6" leads Straight fitting Additional view Light Up or Drop Lens Detail Light Up Lens 6mm Drop Lens 37mm Housing Light Up or Drop Lens Page 8 of 4

9 Sensor Ordering Chart Quantity Sensor Settings * x Number of Sensors E Enlighted FS-D P Philips Easy Sense SNS0 S Sensor Switch MSD EZ Daylight Occupancy/Vacancy 3 Daylight/Occupancy/Vacancy * Settings not available with Enlighted Enlighted FS-D (E) Occupancy/vacancy, daylight harvesting, plus the Internet of Things (IoT) data collection and reporting. For full details, please see FS-D spec sheet on the Enlighted website. Must be paired with Philips Xitanium SR driver (SR driver selection). Commissioning by Enlighted. *Please contact Enlighted for complete details prior to specifying. *Sensor can control up to 4 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths. Philips EasySense SNS0 (P) Occupancy/vacancy and daylight harvesting. Sensor can be programmed on-site via NFC or IR using Android app only, by others. For full details, please see the SNS0 spec sheet on the Philips website. Must be paired with Philips Xitanium SR driver (SR driver selection). Wall dimming via wireless wall switch from Philips/Illumra ( **Please contact Philips for complete details prior to specifying. *Sensor can control up to 0 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths. Sensor Switch MSD EZ (S) Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with eldoled 0-0V driver (DIM driver selection). Manual control of dimming not available with MSD EZ sensor. *Please contact Sensor Switch for complete details prior to specifying. *Sensor can control up to 30 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths. Occupancy Vacancy Daylight Harvesting Driver Compatibility Enlighted FS-D (E) See Enlighted s website for full capabilities SR Philips EasySense SNS0 (P) SR Sensor Switch MSD EZ (S) DIM Factory Presets - Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers spec sheets for details on presets and re-programming. Commissioning - Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors. Standard Sensor Placement - for other placement options, please consult factory. For functionality and limitations, please see sensor details above. Qty Sensor - Beginning Qty Sensor - Beginning and End (9 fixtures and longer) Fixture Length Lit Section* 3 (76mm) Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer. 7 /6 (37mm) Beginning of Run Notes:. For spacing between sensors, please consult the sensor manufacturer.. Exact sensor placement and coverage will be defined by approved factory drawing. 3. Sections controlled by sensors may not be symmetrical - consult factory for layout. Lens Aluminum Sensor Plate -to be painted same as fixture unless specified otherwise * Lit section will be the fixture length minus 3 for sensor plate. Page 9 of 4

10 Standard Direct shapes/configurations: Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory. The minimum standard lengths for L shapes: - IL90 or V90 open shapes is 4 x 4 nominal (example: leg, 90, leg) - IL90 or V90 closed shapes is 6 x 6 nominal (example: 90, leg, 90) ( Exception is that the IL90 & V90 s can be joined directly to provide a 4 x 4 nominal shape). The minimum standard lengths for T & X shapes: - IT90 = 4 nominal on the short leg and 8 nominal on the long side - IX90 = 8 nominal for either direction *For sensors in configurations, please consult factory. Project Specific Direct shapes/configurations: Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements. Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review. IL90 - Lit Horizontal corner "A" Housing IT90 - Lit "T" section IX90 - Lit "X" section "A" Housing "C" Housing "C" Ref. "E" Ref. "E" Housing Bottom View V90 - Lit Inside corner "B" Housing "B" Housing "A" Housing "A" Housing "D" Housing "D" Ref. Bottom View "E" Housing "E" Ref. Bottom View Side View "B" Housing "B" Housing Direct Lit Corner and Section - Dimensions IL90 V90 IT90 IX90 Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM A Housing (Outside) ' - 3/6" 63 A Housing (Inside) ' - 3/8" 594 B Housing (Outside) ' - 5/6" 669 B Housing (Inside) ' - /" 597 C Housing ' - 3/6" 63 * C Ref. ' - /8" 6 D Housing 4' - 3/6" 4 * D Ref. ' - /8" 6 E Housing 4' - 3/6" 4 * E Ref. ' - /8" 6 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. Page 0 of 4

11 Photometry LW Optics / 36W LED / 4000K CCT Catalog #: L36-B35-40-LW-X-04-XX-UNV Report #: Delievered Lumens: 887 Input Watts: 36.74W Efficacy: 79 Power Factor: Total Harmonic Distortion: 0. CCT: 3896K CRI: 95.7 Max Candela: from Vertical Spacing Criterion (0-80):.4 Spacing Criterion (90-70):.4 Spacing Criterion (Diagonal):.38 Maximum Candela = 034 Located At Horizontal Angle = 90, Vertical Angle =.5 # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) MI Optics / 36W LED / 4000K CCT Catalog #: L36-B35-40-MI-X-04-XX-UNV Report #: Delievered Lumens: 950 Input Watts: 36.64W Efficacy: 8 Power Factor: Total Harmonic Distortion: 0. CCT: 3896K CRI: 95.7 Max Candela: 9.5 from Vertical Spacing Criterion (0-80):. Spacing Criterion (90-70):.0 Spacing Criterion (Diagonal):.08 Maximum Candela = 786 Located At Horizontal Angle = 90, Vertical Angle = 9.5 # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) NB Optics / 36W LED /4000K CCT Catalog #: L36-B35-40-NB-X-04-XX-UNV Report #: Delievered Lumens: 359 Input Watts: 36.67W Efficacy: 96 Power Factor: Total Harmonic Distortion: 0. CCT: 3896K CRI: 95.7 Max Candela: 6.5 from Vertical Spacing Criterion (0-80):. Spacing Criterion (90-70):.4 Spacing Criterion (Diagonal):.6 Maximum Candela = 5 Located At Horizontal Angle = 90, Vertical Angle = 6.5 # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) Page of 4

12 Photometry A Optics / 36W LED / 4000K CCT Catalog #: L36-B35-40-A-X-04-XX-UNV Report #: Delievered Lumens: 3647 Input Watts: 36.69W Efficacy: 99 Power Factor: Total Harmonic Distortion: 4.63 CCT: 398K CRI: 83.9 Max Candela: 0 from Vertical Spacing Criterion (0-80):.66 Spacing Criterion (90-70):.4 Spacing Criterion (Diagonal):.44 A5 Optics / 36W LED / 4000K CCT Maximum Candela = 48 Located At Horizontal Angle = 0, Vertical Angle = 0 # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) Catalog #: L36-B35-40-A5-X-04-XX-UNV Report #: Delievered Lumens: 3660 Input Watts: 36.73W Efficacy: 95 Power Factor: Total Harmonic Distortion: 0. CCT: 3896K CRI: 95.7 Max Candela: 3 from Vertical Spacing Criterion (0-80):.0 Spacing Criterion (90-70): 0.84 Spacing Criterion (Diagonal):.00 BW Optics / 36W LED / 4000K CCT Maximum Candela = 9 Located At Horizontal Angle = 90, Vertical Angle = 3 # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) Catalog #: L36-B35-40-BW-X-04-XX-UNV Report #: Delievered Lumens: 393 Input Watts: 36.65W Efficacy: 87 Power Factor: Total Harmonic Distortion: 0. CCT: 3896K CRI: 95.7 Max Candela: 40.5 from Vertical Spacing Criterion (0-80):.8 Spacing Criterion (90-70):.36 Spacing Criterion (Diagonal):.98 Maximum Candela = 388 Located At Horizontal Angle = 90, Vertical Angle = 40.5 # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) Page of 4

13 Photometry LU Optics / 36W LED / 4000K CCT Catalog #: L36-B35-40-LU-X-04-XX-UNV Report #: Delievered Lumens: 30 Input Watts: 38.04W Efficacy: 8 Power Factor: Total Harmonic Distortion: 0. CCT: 3896K CRI: 95.7 Max Candela: from Vertical Spacing Criterion (0-80):.6 Spacing Criterion (90-70):.6 Spacing Criterion (Diagonal):.38 Maximum Candela = 00 Located At Horizontal Angle = 0, Vertical Angle = # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) DR Optics / 36W LED / 4000K CCT Catalog #: L36-B35-40-DR-X-04-XX-UNV Report #: Delievered Lumens: 34 Input Watts: 37.95W Efficacy: 90 Power Factor: Total Harmonic Distortion: 0. CCT: 3896K CRI: 95.7 Max Candela: 6.5 from Vertical Spacing Criterion (0-80):.6 Spacing Criterion (90-70):.6 Spacing Criterion (Diagonal):.6 Maximum Candela = 600. Located At Horizontal Angle = 90, Vertical Angle = 6.5 # - Vertical Plane Through Horizontal Angles (90-70) # - Vertical Plane Through Horizontal Angles (0-80) Page 3 of 4

14 Photometry 4000K 3500K 3000K 700K L36 Photometry Multiplier Table CCT Multiplier Light Engine Multiplier Light Engine Lumens Wattages B B B B B B Lens Multiplier LW.000 MI.0 NB. A.68 A5.63 BW.06 LU.074 DR.85 VW VM VC VB CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page one (light engine). Light engine multiplier supplied for per foot values listed on page one (light engine). Page 4 of 4