WUXGA / WQXGA. projectiondesign as addendum IR FS35 PROJECTORS.

Transcription

1 projectiondesign as addendum IR FS35 PROJECTORS WUXGA / WQXGA This addendum contains a decription of the special features which are different from a standard type projector. Please refer to the main user guide of the product for important information about safety precautions and the set-up and use of the projector. Make sure to read both the standard user guide and this addendum carefully before you operate the projector. Dieser Anhang enthält eine Beschreibung der besonderen Merkmale, die sich von denen eines normalen Projektors unterscheiden. Für wichtige Informationen in Bezug auf die Sicherheitsvorkehrungen und den Aufbau und die Benutzung des Projektors schauen Sie bitte in die Gebrauchsanweisung für das Produkt. Lesen Sie bitte die Gebrauchsanweisung und diesen Anhang aufmerksam durch, bevor Sie den Projektor in Benutzung nehmen. Le présent addenda présente les caractéristiques particulières qui diffèrent de celles d un projecteur de série. Pour les consignes de sécurité importantes et les indications concernant la configuration et le maniement de l appareil, reportez-vous au guide d utilisation principal. Lisez soigneusement le guide standard ainsi que cet addenda avant de mette le projecteur en service. Esta adenda contiene una descripción de las funciones especiales que se diferencian de las de un proyector de tipo estándar. Por favor, remitirse a la guía del usuario principal del producto, para información importante sobre las precauciones de seguridad y la configuración y el uso del proyector. Procurar leer detenidamente tanto la guía del usuario estándar como esta adenda antes de poner en marcha el proyector. Il presente allegato illustra le caratteristiche speciali differenti rispetto a un proiettore standard. Fare riferimento alla Guida dell utente principale del prodotto per informazioni importanti sulle precauzioni di sicurezza, la configurazione e l uso del proiettore. Leggere attentamente sia la Guida dell utente standard che questo allegato prima di utilizzare il proiettore. Dette addendumet inneholder en beskrivelse av de egenskapene som avviker fra en standard projektor. Sjekk med produktes komplette brukerveiledning for viktig informasjon om sikkerhets-tiltak, oppsett og bruk av projektoren. Les både den komplette brukerveiledningen og addendumet nøye før projektoren tas i bruk.

2 2

3 Contents 1 Introduction 4 2 Features 4 3 Menus 6 4 Product Use 9 5 Compatibility 10 3

4 1 Introduction 2 Features The FS35 is a state of the art NVG (Night Vision Goggle) stimulation LED projector which include a fourth LED light chip that emits infrared light beyond the range visible to the human eye. The product is capable of visualizing night-time and limited-visibility scenario simulation as well as visible day-time or pitch black scenarios from the common display engine in order to have a true-to-life simulation. The FS35 WQXGA is single channel input and handles the content through one of the input connectors (HDMI/DVI). The FS35 WUXGA is dual channel input to handle separate content on IR LED and RGB LED simultaneously. The infrared wavelength is optimized for the performance of the optics in the projector and the night vision goggles present in the market today. The projector s solid-state light source provides a completely constant light output over time, eliminating the need for recalibration, reducing maintenance and total cost of ownership to a minimum. 2.1 Measurements NVG stimulation by a fourth Infrared LED WQXGA 2560 x1600 resolution WUXGA 1920 x1200 resolution Dimmable to extreme low lumens output of the visible RGB display Motorised optical filter Project infrared display only, no visible image to the unaided human eye Simultaneous project visible and infrared for limited visibility scenario Smear reduction sequence Infrared power adjustments Below are the physical measures of the projector: 95 82,5 59, ,5 94,3 111,8 Ceiling Mount Interface M6 Threads 163,3 123,1 LENS RELEASE PUSH AND HOLD 300mm 279, mm 4

5 2.2 Infrared LED The IR LED is a LED that has a spectral emission at 850nm to emit light in the night vision stimulated content. 2.3 Motorized Optical Filter This is the optical filter part of the illumination system in the base projector. This filter is motorized and can be moved in and out of the illumination system to improve the dimming resolution in night time scenery. The filter is a ND filter (Neutral Density) which is 6% transmissive for the visible light ( nm) and 95% transmissive for the IR wavelengths ( nm). When the ND filter is moved into the illumination path the visible light will decrease to 6% of the total visible light, while passing through 95% of the IR light. 2.4 Single Channel Input 2.5 Dual Channel Input In single channel mode the content goes through one of the input connectors and will be visible for both the human eye and with NVGs (Night Vision Goggles). The RGB LEDs and IR LED are lit simultaneously. FS35 WUXGA allows dual input so the user can have separate content on IR LED and RGB LEDs simultaneously. In this mode the IR LED will display the source connected to DVI 1/HDMI 1, while RGB LEDs are used to display source connected to DVI 2/HDMI 2. The RGB LEDs are turned off when the IR source is displayed to allow best possible night-time or limited-visibility simulation. Dual Channel Input allows using two separate channels, resolution up to 60Hz pr channel. Both channels must have the same resolution. In this mode the EDID will automatically be changed to 1920x Hz. 5

6 3 Menus 3.1 BrilliantColor tm Sequences There are 5 sequences to choose in the REALCOLOR menu. These displays differently when it comes to sequence modes for color points versus lumens output. Vizsim Graphics HighBrightness SRP TM 6ms (smear reduction) SRP TM 8ms (smear reduction) 3.2 IR menu WQXGA A separate IR menu which works with each BrilliantColor TM sequence listed above, controls the infrared and visual RGB performance. Full spectrum: Turns infrared LED on/off. IR LED power: Adjusts the intensity of infrared LED. RGB LEDs: Turns visible RGB LED s on/off. Dim mode standard: Dimming options from full to minimum with color processing turned on so the white point is kept constant throughout the range. Appropriate use for daytime and evening scenarios. 6

7 Dim mode custom: Dimming scheme for limited visibility scenarios, enabling the user to separately adjust the values of the R, G and B intensity in order to tune in the low light visibility matching the projected content. 3.3 IR menu WUXGA A separate IR menu which works with each BrilliantColor TM sequence listed above, controls the infrared and visual RGB performance. Full spectrum: Turns infrared LED on/off. Dual head: Enables dual head input sources to be connected. IR LED power: Adjusts the intensity of infrared LED. 7

8 RGB LEDs: Turns visible RGB LED s on/off. Dim mode standard: Dimming options from full to minimum with color processing turned on so the white point is kept constant throughout the range. Appropriate use for daytime and evening scenarios. Dim mode custom: Dimming scheme for limited visibility scenarios, enabling the user to separately adjust the values of the R, G and B intensity in order to tune in the low light visibility matching the projected content. 8

9 4 Product Use For basic operations, set-up and safety precautions, please refer to the main user guide included with the product. The FS35 is capable of displaying both daytime images, as well as night vision stimulated content using the fourth infrared chip in the display engine. By operating and adjusting the dedicated IR Menu options described in the MENU section, the projector is able to display the full spectrum of the simulation scenarios (see examples below). Daytime scenario: Bright scenarios with high lumens output with crisp colors showing all details. Typically full power to the RGB LED s and no power to the fourth infrared LED. Evening scenario: Low illuminated scenarios at evening/dusk where the picture is dimmed by adjusting the RGB LED s. Fewer details are visible to the unaided human eye compared to daytime scenarios. Limited visibility scenario: Night time image, where the visible RGB LED is dimmed to very low lumens output by using the custom IR menu. Details are barely seen with the human eye. Using the infrared LED and NV goggles in addition gives full spectrum NV simulation modus. For pitch black scenarios the visible RGB LED s are turned off, only keeping the infrared LED showing the content. If you start in infrared only mode and do not have your NV-goggles available in terms of being able to see and navigate the menus: Press 4 times on the LIGHT button on the keypad and the visible RGB field turns on. 9

10 5 Compatibility Examples of supported Night Vision-goggles: (not a complete list, a selection of the most common in the market today) Gen 1 Gen 2 Gen 2+ Russian Gen 2+ Gen 2 SuperGen Gen 2 XD-4 Gen 2 XD-4 ONYX Gen 2 XD-4AG Gen 2 XD4AG ONYX Gen 2 XR5 Gen 2 XR5 ONYX Gen 2 XR5AG Gen 2 XR5AG ONYX Gen 3 Commercial Gen 3 Premium Gen 3 Pinnacle Gen 4 Gen 4 Gated/ IIT 10

11 11

12 All 2010 brands projectiondesign and trade names AS. are All the rights property reserved. of their All brands respective and owners. trade names Specifications are the property subject of to their change respective without owners. prior notice. Specifications subject to All change values without are typical prior and notice. may All vary. values Please are typical visit our and website may vary. for latest Please specifications visit our website and product for latest updates. specifications and product offerings All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice. All values are typical and may vary. Please visit our website for latest specifications and product offerings.