Meet the Walking Foot #50

Transcription

1 home / education / 101 / tutorials / Meet the Walking Foot #50 Meet the Walking Foot #50 Quilter Jacquie Gering shares some advice about the BERNINA Walking Foot #50. Since discovering quilting five years ago, Jacquie has become a passionate quilt maker and designer. She is known for her out of the box designs and unique style. She is the co-author of the newly released Quilting Modern: Techniques and Projects for Improvisational Quilts. She blogs and shares her quilting knowledge on her popular blog, Tallgrass Prairie Studio and lives in downtown Chicago with her husband and her black lab, Bruno. What would I do without my Walking Foot #50? For those of us who quilt on our home machines this foot is our quilting partner, and your path to a myriad of creative quilting possibilities. Straight line quilting using the Walking Foot #50 The Walking Foot #50 works for straight-line quilting and the design opportunities with straight lines are limitless. Straight-line quilting is only the beginning; this foot can also help you stitch a variety of quilting designs with curves and even supports quilting with decorative stitches on your machine. It is also my go-to foot for attaching quilt binding.

2 foot for attaching quilt binding. Even flowing curves are possible with the Walking Foot #50 To get the most out of the Walking Foot #50, it s important to understand how the foot works and how the foot s design features support you as a quilter. Very simply, this foot adds a second set of feed dogs to move the top fabric at the same rate as the bottom fabric to keep multiple layers from shifting. For quilters, that means that the quilt sandwich moves evenly and prevents bunching or puckering. The Walking Foot #50 attaches like a regular foot but with the addition of a u-shaped arm that rests around the needle bar. Make sure the U-shaped arm is hooked on the needle bar It s important that the foot is attached correctly. When the arm is attached correctly it allows for the extra feed dogs to do their work. The BERNINA Triple Sole Walking Foot #50 comes with three interchangeable soles.

3 Walking foot with open sole attached Closed sole is recommended for sewing on slippery or sticky fabrics and for matching plaids. There are ¼ and 1/8 markings on the sole to serve as seam and cornering guides. Open sole is recommended for machine quilting. It has an open toe to improve visibility when quilting. Again it has the ¼ and 1/8 markings and the back of this sole is designed to reduce drag and as quilter s know, drag is the enemy when quilting. Center guide sole this is a new sole that is recommended for helping achieve a perfect stitching line along a seam or edge. Ask your BERNINA Dealer about this one! I have to tell you for the first year I owned my Walking Foot #50 I used the sole that was attached when I bought it. I now use both the open and closed sole depending on the quilting design I m doing. The Center Guide Sole is a dream for those of you who like to do stitch-in-the-ditch quilting. (Ditch-quilting is quilting in the pieced seams of your quilt.) To change the sole on your foot you ll need a small flathead screwdriver. Place the foot on its side with the screw on top as shown. Place your Walking Foot on its side to change soles

4 Place your Walking Foot on its side to change soles Loosen the screw with your screwdriver to open the bars that hold the sole in place. Slip off one sole and place the new sole in position. You ll notice that one side of the sole has two holes and the other one. Line these up with the holes on each side of the bars and tighten the screw. The sole will seat itself. Changing the sole is pretty simple, but if you have trouble, your friendly BERNINA Dealer is just a phone call away. The Walking Foot #50 also comes with two seam guides, one for the right and one for the left. Left and right seam guides and attachment screw The seam guides attach through a hole at the back of the foot and are secured with a screw. The seam guides allow you to quilt repeating lines an equal distance apart without marking and if we don t have to spend time marking, that s more time we can spend quilting! Walking Foot #50 with seam guide attached Set the seam guide the desired distance from the needle and tighten the screw in place. Run the guide along the previous line of stitching as you sew. Remember those markings that were referred to on the sole of the foot. Let s explore those a little more closely. The BERNINA walking foot is perfectly designed to help you achieve straight-line quilting designs easily. The marks on the foot will help you quilt dense quilting lines. With the needle in the center position, running

5 The marks on the foot will help you quilt dense quilting lines. With the needle in the center position, running the edge of the foot along a line will yield lines ½ apart. Again with the needle in the center position, use the ¼ mark on the sole to quilt lines ¼ apart. So, you want to quilt a quilt on your home machine with your Walking Foot #50. What do you need to know to be successful? For some basics on how to get started, check out this introduction to straight-line quilting. Quilting with the Walking Foot #50 endless possibilities! I ve learned so much about quilting with the walking foot since I started making quilts, and to share that information I m starting a series on my blog, Tallgrass Prairie Studio, called Walking Foot Wednesdays. I m going to be sharing hints and tips for quilting with the walking foot including quilting design ideas, and this is just a preview of the series. I hope you ll come over and join me and get inspired to quilt! You can also learn more about the BERNINA Walking Foot #50 by visiting the BERNINA USA website product page, and by downloading this FREE project featuring this foot, the Walk In The Park quilting project by Nina McVeigh, also from our Quilting Classes page at our BERNINA USA website.