466 TE SERIES PLIERS 481 ENGINEERS MULTIGRIP PLIERS 468 ELECTRICAL ENGINEERS PLIERS 473 G SERIES PLIERS 484
|
|
|
- Melvyn Howard
- 6 years ago
- Views:
Transcription
1 ENGINEERS MULTIGRIP PLIERS 468 TE SERIES PLIERS 481 Locking multigrip pliers Automatic multigrip pliers Standard multigrip pliers Notchjoint multigrip pliers Diagonal cutters Halfround nose pliers Combination pliers Flat nose pliers Standard wire strippers ELECTRICAL ENGINEERS PLIERS 473 G SERIES PLIERS 484 Cutters Flat nose pliers Halfround nose pliers Wire stripper Diagonal cutters End cutters Halfround nose pliers Combination pliers Flat nose pliers CPE SERIES PLIERS 475 VE SERIES 1000 VOLT PLIERS 487 Diagonal cutters End cutters Halfround nose pliers Combination pliers Flat nose pliers Round nose pliers Standard wire strippers Diagonal cutters End cutters Halfround nose pliers Combination pliers Flat nose pliers Round nose pliers Standard wire strippers
2 PLIERS CIRCLIP PLIERS LOCKGRIP PLIERS 8 FLUORESCENT SHEATH PLIERS 491 END NIPPERS 512 Fluorescent sheath pliers CIRCLIP 496 Heavyduty end nippers End nippers Inside Circlip pliers Outside circlips pliers Highperformance pliers Reversible pliers Removable tip pliers Snapring pliers SPECIAL PLIERS 513 LOCKINGWIRE PLIERS 502 Special pliers Plastics cutters Motorists pliers Extralong reach halfround nose pliers Loweffort cutters "Connector" pliers LOCKGRIP PLIERS 503 PLIER SETS AND MODULES 516 "T5" lockgrip pliers Largecapacity lockgrip pliers Compact lockgrip pliers Singlesetting lockgrip pliers "Metalworking" lockgrip pliers Bar clamp lockgrip pliers Plier sets and modules
3 Engineers multigrip pliers Locking multigrip pliers MULTIGRIP PLIERS POWER AND PRECISION POWERFUL The closed position of the egonomic comfort grip handles increases the tightening power. STURDY Accurate and strong thanks to its rack and offset pin. SLIMLINE NOSE With selfgripping teeth. 2 FINISHES AVAILABLE CPE version: Chromefinished. Bimaterial ergonomic grips. G version: Varnished. Ergonomic grips. 181EF version: long nose 468
4 Engineers multigrip pliers 181A Locking twin slipjoint multigrip pliers Pliers Circlip pliers Lockgrip pliers 8 NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B B C E E1 L L1 Capacity Nuts Capacity Maxi Tube 181A.18CPE ,5 20, A.25CPE 7,5 22, A.18G ,5 20, A.25G 7,5 19, A.30G ,0 22, EF Locking twin slipjoint multigrip pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B B C E E1 L1 Capacity Maxi Tube L Capacity Nuts 181EF.25CPE 25 37,5 7,5 22, EF.25G 25 37,5 7,5 19,
5 Engineers multigrip pliers 180 SLIPJOINT MULTIGRIP PLIERS RIVETED PIVOT PIN IDEAL FOR CONFINED SPACES! 1 ❶ Long slim nose for improved reach in confined spaces. ❷ 7 positions. ❸ Capacity (parallel jaws): 44 mm. SAFE ❷ ❸ 44 mm 180 Highperformance multigrip pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B near live components. A B C E E1 L1 L CPE VE SELFTIGHTENING PLIERS SLIPJOINT MULTIGRIP PLIERS 470
6 Engineers multigrip pliers Pliers Circlip pliers Lockgrip pliers 8 Standard multigrip pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B B C E E1 H L L1 170A 32, Twin slipjoint multigrip pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B A B C E H L L1 484A , A , Automatic multigrip pliers SELFADJUSTING MULTIGRIP PLIERS FAST ADJUSTMENT 485 Automatic multigrip pliers A B C E H L L
7 Engineers multigrip pliers Standard multigrip pliers "Mammoth" multigrip pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B farm machinery. B C E H L L1 182A.CP ,5 Notchjoint multigrip pliers Notchjoint multigrip pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B Positive engagement of notches provides high power. Pivot pin is not load bearing. Smooth adjustment. B C E H L L1 480.ECG , Notchjoint multigrip pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B Positive engagement of notches provides high power. Pivot pin is not load bearing. A B C E H L L1 482.CPE , EG ,
![Engineers multigrip pliers Pliers Circlip pliers Lockgrip pliers 8 "Extrawide capacity" straightjaw pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B107.500 L1 B C E H L [kg] 481.](/docs-images/80/81600050/images/8-0.jpg "40 50 14 102 412 90 1,10 Cutting pliers PRECISION CUTTERS 3 TYPES OF CUT: AXIAL Hard cutting edges for all materials. SEMIFLUSH Clean cut in semihard materials. FLUSH Smooth burrfree finish.")
8 Engineers multigrip pliers Pliers Circlip pliers Lockgrip pliers 8 "Extrawide capacity" straightjaw pliers NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B L1 B C E H L [kg] ,10 Cutting pliers PRECISION CUTTERS 3 TYPES OF CUT: AXIAL Hard cutting edges for all materials. SEMIFLUSH Clean cut in semihard materials. FLUSH Smooth burrfree finish. MicroTech electronic pliers. See Electronic Section p.814. "Compact" diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B B C E L Diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B B C E L L ,5 10,5 10, ,0 10,5 10, ,5 10,5 10, ,0 10,5 10,
9 Electrical engineers pliers Flatnose pliers Flat nose pliers NF ISO 9655, ISO 9655, DIN ISO 9655, ASME B components. B C E E1 L L Halfround nose pliers Halfround nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B B C E E1 L L , , Wire strippers Fine wire strippers 474
10 CPE series pliers Diagonal cutters FACOM CUTTING PLIERS HIGH PERFORMANCE! Pliers Circlip pliers Lockgrip pliers 8 FACOM S CUTTING PLIERS ARE DESIGNED TO MEET THE 3 MAIN REQUIREMENTS OF PROFESSIONAL USERS. 1 One tool for cutting all materials Four types of finish ❶ ❷ ❸ ❹ ❶ 2 A reduced cutting effort ❷ FACOM FACOM ❸ 3 Durable cutting power ➊ ➋ Cutting capacity F F F A Copper F F F Plastic F ❹ 475
11 CPE series pliers CPE SERIES CHROMEFINISHED PLIERS STRENGTH ❶ ❶ Return spring. 192.CPE Highperformance diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B B C d maxi E L CPE 21,5 15,5 1,4 9, CPE 24,0 10, CPE 20,0 11, CPE 22,0 2,0 11, Electricians diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B B C E L L CPE End cutters 190.CPE Highperformance end cutters NF ISO 5748, ISO 5748, DIN ISO 5748, ASME B A B C d maxi E L CPE 11, CPE 7,5 31 7,5 2,0 13,
12 CPE series pliers Halfround nose pliers Pliers Circlip pliers Lockgrip pliers 8 FACOM HALFROUND NOSE PLIERS A COMPREHENSIVE RANGE TO SUIT EVERY NEED Highperformance. Straight and 40 angled shortnose pliers. Straight and 40 angled longnose pliers. Guaranteed cutting accuracy and consistency. 2 Industrial, automotive applications, etc... Electrical, electromechanical applications, etc
13 CPE series pliers CPE Long halfround nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B B C d E E1 L CPE 75 2, CPE 2, Halfround long snipenose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 E2 L1 C E L CPE ,5 Short halfround nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 B C d E L CPE , Short halfround nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 B C d E L CPE ,
14 CPE series pliers Combination pliers 187.CPE Combination pliers Pliers Circlip pliers Lockgrip pliers NF ISO 5746, ISO 5746, DIN ISO 5746, ASME B Flatnose pliers 188 Flat nose pliers B C E L CPE , CPE 23 10, CPE 42 11, NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B Round nose pliers Round nose pliers C E E1 E2 L1 L CPE 4, CPE 75 4, E.16CPE 2,5 9 3,5 130 NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B Standard wire strippers Wire strippers E1 E2 C d E L CPE d mini maxi B E L CPE
15 CPE series pliers Nonslip spatulashaped pressure area SERIES "E" PLIERS ERGONOMIC Three levels of finish Guard Return spring Highly resistant materials SAFE 480
16 TE series pliers Diagonal cutters TE SERIES Ergonomic! ❶ Spatulashaped pressure areas ❷ Return spring ❸ Guard VARNISHED, POLISHED PLIERS ❶ Pliers Circlip pliers Lockgrip pliers 8 RESISTANT 192.TE Highperformance diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B axis. B C d maxi E L TE 21,5 15,5 1,4 9, TE 24,0 10, TE 20,0 11, TE 22,0 2,0 11,
17 TE series pliers Electricians diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B wires, modern materials. axis. B C E L TE Halfround nose pliers TE Long halfround nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B B C d E1 L TE 75 2, TE 2, Combination pliers 187.TE Combination pliers NF ISO 5746, ISO 5746, DIN ISO 5746, ASME B B C E L TE 23 10, TE 42 11,
18 TE series pliers Flatnose pliers Flatnose pliers Pliers Circlip pliers Lockgrip pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 E2 L1 C E L TE Standard wire strippers Wire strippers A B C E L TE VSE INSULATED CRIMPING PLIERS, WIRE STRIPPERS, ETC. Electricity section p
19 G series pliers Diagonal cutters SERIES G VARNISHED, POLISHED PLIERS PVC GRIPS 192.G Highperformance diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B B C d maxi E L G 21,5 15,5 1,4 9, G 24,0 10, G 20,0 11, G 22,0 2,0 11, Electricians diagonal cutters NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B wires, modern materials. B C E L G
20 G series pliers End cutters 190.G Highperformance end cutters Pliers Circlip pliers Lockgrip pliers NF ISO 5748, ISO 5748, DIN ISO 5748, ASME B B C d maxi E H L G 11, G 31 7,5 2,0 13, CUTTING PLIERS END CUTTING AND NIPPER Find these products in p. 512 Halfround nose pliers G Long halfround nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B B C d E E1 L G 75 2, G ,5 3, G 2, Short halfround nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 B C d E L G ,
21 G series pliers Combination pliers 187.G Combination pliers NF ISO 5746, ISO 5746, DIN ISO 5746, ASME B B C E E1 L G , G , G 42 11, Flatnose pliers 188.G Flat nose pliers NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B C E E1 E2 L1 L G G
22 VE series 1,000 Volt pliers Diagonal cutters VE SERIES 1,000 V INSULATED PLIERS Pliers Circlip pliers Lockgrip pliers 8 20% MORE SLIP RESISTANT WITH SPATULA SHAPED PRESSURE AREAS Guard Return spring for added safety Insulation tests ❶ ❷ ❸ ❹ ❺ INFORMATION SAFETY ❶ ❷ ❸ ❹ ❺ 192.VE 1,000 Volt insulated highperformance diagonal cutters NF ISO 5749, NF EN 60900, ISO 5749, EN 60900, DIN ISO 5749, DIN EN 60900, ASME B B C Volt for 10 seconds, at the end of the manufacturing cycle. axis. E L B C E L VE 21,5 15,5 9, VE 24,0 10, VE 20,0 11,
23 VE series 1,000 Volt pliers 1,000 Volt insulated electricians diagonal cutters B C NF ISO 5749, NF EN 60900, ISO 5749, EN 60900, DIN ISO 5749, DIN EN 60900, ASME B Volt for 10 seconds, at the end of the manufacturing cycle. axis. E L B C E L VE End cutters 1,000 Volt insulated highperformance end cutters NF ISO 5748, NF EN 60900, ISO 5748, EN 60900, DIN ISO 5748, DIN EN 60900, ASME B Volt for 10 seconds, at the end of the manufacturing cycle. axis. B C E H L VE 11,
24 VE series 1,000 Volt pliers Halfround nose pliers VE 1,000 Volt insulated long halfround nose pliers Pliers Circlip pliers Lockgrip pliers NF ISO 5745, NF EN 60900, ISO 5745, EN 60900, DIN ISO 5745, DIN EN 60900, ASME B Volt for 10 seconds, at the end of the manufacturing cycle. 8 B C d E E1 L VE 75 2, VE 2, VE 1,000 Volt insulated short halfround nose pliers NF ISO 5745, NF EN 60900, ISO 5745, EN 60900, DIN ISO 5745, DIN EN 60900, ASME B Volt for 10 seconds, at the end of the manufacturing cycle. B C d E E1 L VE , VE , Combination pliers 187.VE 1,000 Volt insulated combination pliers NF ISO 5746, NF EN 60900, ISO 5746, EN 60900, DIN ISO 5746, DIN EN 60900, ASME B Volt for 10 seconds, at the end of the manufacturing cycle. piano wire, soft wires, modern materials, etc. axis. B C E L VE , VE 23 10,
25 VE series 1,000 Volt pliers Flatnose pliers 188.VE 1,000 Volt insulated flat nose pliers NF ISO 5745, NF EN 60900, ISO 5745, EN 60900, DIN ISO 5745, DIN EN 60900, ASME B Volt for 10 seconds, at the end of the manufacturing cycle. C E E1 E2 L1 L VE VE Round nose pliers 1,000 Volt insulated round nose pliers NF ISO 5745, NF EN 60900, ISO 5745, EN 60900, DIN ISO 5745, DIN EN 60900, ASME B Volt for 10 seconds, at the end of the manufacturing cycle. E1 E2 C d E L VE Standard wire strippers 1,000 Volt insulated strippers NF EN 60900, EN 60900, DIN EN Volt for 10 seconds, at the end of the manufacturing cycle. B E L VE MULTIGRIP PLIERS 180.VE RIVETED PIVOT Find the 180.VE pliers p
26 Fluorescent sheath pliers Pliers Circlip pliers Lockgrip pliers 8 Slipjoint locking multigrip pliers with fluorescent grips NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B A C E Capacity Nuts CPEF Slipjoint multigrip pliers with fluorescent grips NF ISO 8976, ISO 8976, DIN ISO 8976, ASME B B C E E1 L L1 180.CPEF CPEF Diagonal cutters with fluorescent grips NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B B C d maxi E L CPEF 21,5 15,5 1,5 9, CPEF 22,0 2,5 11,
27 Fluorescent sheath pliers Front cutters with fluorescent grips NF ISO 5748, ISO 5748, DIN ISO 5748, ASME B A B C E L CPEF 7,5 31 7,5 13, Longreach halfround nose pliers with fluorescent grips NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 B C d E L CPEF 75 2, Longreach slim halfround nose pliers with fluorescent grips NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 E2 L1 C E L CPEF ,
28 Fluorescent sheath pliers Pliers Circlip pliers Lockgrip pliers 8 Short halfround nose pliers with fluorescent grips NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B B C d E E1 L CPEF , Combination pliers with fluorescent grips NF ISO 5746, ISO 5746, DIN ISO 5746, ASME B B C E L CPEF ,5 195 Flat nose pliers with fluorescent grips NF ISO 5745, ISO 5745, DIN ISO 5745, ASME B E1 E2 L1 C E L CPEF
29 Fluorescent sheath pliers MicroTech "heavyduty" cutters with fluorescent grips NF ISO 9654, ISO 9654, DIN ISO 9654, ASME B to piano wire up to 0.5 mm. B C E L MTF 10,5 11, Cu Ni wire diameter 0,3 1,4 Fe wire 30 HRc diameter Cut h MicroTech longreach cutters with fluorescent grips NF ISO 9654, ISO 9654, DIN ISO 9654, ASME B standard pliers. being ejected. Cu Ni wire B C E L Cut diameter 425F 10, ,1 1,3 i MicroTech gripping pliers with fluorescent grips NF ISO 9655, ISO 9655, DIN ISO 9655, ASME B B C E E1 L 423.MTF , Inside Circlip pliers with fluorescent grips straight nose NF E 73130, DIN 5256, ASME B d d mini maxi L 179A.18F 215 Inside Circlip pliers with fluorescent grips 45 angled NF E 73130, DIN 5256, ASME B d d mini maxi L 199A.18F
30 Fluorescent sheath pliers Pliers Circlip pliers Lockgrip pliers 8 Outside Circlip pliers with fluorescent grips straight nose NF E 73130, DIN 5254, ASME B d d mini maxi L 177A.18F 175 Outside Circlip pliers with fluorescent grips 90 angled NF E 73130, DIN 5254, ASME B d d mini maxi L 197A.18F F Inside Circlip pliers with fluorescent grips NF E 73130DIN 5256, ASME B FLUO Outside Circlip pliers with fluorescent grips NF E 73130DIN 5254, ASME B
31 Circlip pliers Inside circlip pliers FACOM CIRCLIP PLIERS PACKED WITH FEATURES! Performance and safety Slimline and accessibility Comfort and ergonomics Productivity Closing Opening INSIDE CIRCLIP PLIERS SAFETY 179A Straight nose inside circlip pliers NF E 73130, DIN 5256, ASME B d d mini maxi L 179A.9 0, A.13 1, A A.23 2, A.32 3,
32 Circlip pliers 169A 45 angled nose inside circlip pliers Pliers Circlip pliers Lockgrip pliers NF E 73130ASME B d d mini maxi L 169A.9 0, A.13 1, A A.23 2, A 90 angled nose inside circlip pliers NF E 73130, DIN 5256, ASME B d d mini maxi L 199A.9 0, A.13 1, A A.23 2, A.32 3, Outside circlip pliers OUTSIDE CIRCLIP PLIERS SAFETY 177A Straight nose outside circlip pliers NF E 73130, DIN 5254, ASME B d d mini maxi L 177A.9 0, A.13 1, A A.23 2, A.32 3,
33 Circlip pliers 167A 45 angled nose outside circlip pliers NF E 73130ASME B d d mini maxi L 167A A A A A 90 angled nose outside circlip pliers NF E 73130, DIN 5254, ASME B d d mini maxi L 197A.9 0, A.13 1, A A.23 2, A.32 3,2 290 PCJ4 Set of 4 straight and 90 angled nose circlip pliers 18 to 60 mm PCSNJ4 Set of 4 straight nose circlip pliers 10 to 60 mm 498
34 Circlip pliers Highperformance pliers CHOOSING THE RIGHT CIRCLIP PLIERS Pliers Circlip pliers Lockgrip pliers 8 (A) (A) Racktype "compression" pliers for inside circlips ASME B Tips d d mini maxi L , Straight 3, Racktype "expansion" pliers for outside circlips pliers ASME B Tips d d mini maxi L , Straight 3, SE Spare tips for pliers 477 to 499 Tips d d mini maxi 490.SE281 Straight 490.SE321 Straight 3,2 490.SE SE SE322 3,2 490.SE
35 Circlip pliers Reversible pliers REVERSIBLE CIRCLIP PLIERS REVERSIBLE CIRCLIP PLIERS 475A 475A Reversible inside and outside circlip pliers d d mini maxi L 475A.15 1, A A.J1 Set of two reversible pliers Removable tip pliers 470 Inside and outside circlip pliers Supplied in a plastic case
36 Circlip pliers Pliers Circlip pliers Lockgrip pliers Inside circlip pliers NF E 73130, DIN 5256, ASME B Outside circlip pliers NF E 73130, DIN 5254, ASME B AJ2 Spare tips 470.E Spare tips for circlip pliers 467 and 469 Tips d d mini maxi 470.E1 Straight 0,9 470.E2 0,9 470.E3 0,9 470.E5 Straight 1,3 470.E6 1,3 470.E7 1,3 470.E8 Straight 470.E9 470.E10 Snapring pliers 411A Outside snapring pliers ASME B d mini maxi L 411A A
37 Lockingwire pliers FACOM LOCKINGWIRE PLIERS Fast twist in lockwire securing assemblies subject to vibration. ❶ ❸ ❷ Automatic model Short lockingwire pliers 8" ASME B E1 E2 E3 H1 L1 A B C E H L 445.8R , , Lockingwire pliers 10" ASME B E1 E2 E3 H1 L1 A B C E H L R ,5 15,5 11,
38 Lockgrip pliers "T5" lockgrip pliers Pliers Circlip pliers Lockgrip pliers 8 T5 SERIES SAFE, PRACTICAL AND ERGONOMIC Articulated upper jaw for a clearer view of work pieces. LOCKGRIP PLIERS ERGONOMIC AND SAFE Thumbscrew jaw adjustment. Totally enclosed mechanism and screw. Smoothaction release trigger. Multipurpose forged and hardened jaws. Capacity: 40 mm 65 mm 100 mm Fixed lower jaw for resting on a workbench or damping in a vice. 65 mm Smooth, controlled release. Onehand operation 100 mm T5: INCREASED SAFETY No shocks to the hand The trigger system eliminates shocks to the hand on release. Hand protection Good finger clearance between lever and work surface. T5: MORE PRACTICAL AND ERGONOMIC. Onehand operation The pliers clamp and release with one hand even when very tight. Leaves the other hand free to hold components. Controlled release The trigger system ensures progressive and controlled release. T5 pliers maintain pressure and components remain assembled between the jaws during unclamping. Ergonomic Ergonomic sheathed handles and demultiplication reduce fatigue
39 Lockgrip pliers T5.L Aluminiumsheathed triggerrelease lockgrip pliers spatter. opening at all jaw openings. longer working life. Open Position O maxi Dimension / T5.L d. 40 mm 250 x 75 x 22 T5.L65 T5.1L Plasticsheathed triggerrelease lockgrip pliers opening. longer working life
40 Lockgrip pliers Largecapacity lockgrip pliers SERIES 500 Pliers Circlip pliers Lockgrip pliers LOCKGRIP PLIERS ORIGINAL 500 LOCKGRIP PLIERS 8 LARGE CAPACITY LOCKS ON TO ANY SHAPE Round up to 135 mm The range of ORIGINAL 500 lockgrip pliers feature the efficient slipjoint developed by FACOM. Jaws engineered for secure grip. Hinged tip versions. Hexagonal up to 125 mm Angle section up to 70 mm 505
41 Lockgrip pliers Shortnose lockgrip pliers ASME B H L L Longnose lockgrip pliers ASME B H L L position slip joint largecapacity pliers ASME B H L L position slip joint largecapacity pliers ASME B H L L
42 Lockgrip pliers Pliers Circlip pliers Lockgrip pliers 8 SERIES 580 IDEAL FOR SAVING TIME AND FOR PRODUCTION WORK AUTOMATIC LOCKGRIP PLIERS No adjustment! ❶ Just adjust the pressure no readjustment required. ❷ The tool automatically adjusts from thick parts to thin and from thin parts to thick. ❷ Patented automatic closing mechanism. ❸ Automatically adjusts the jaws to the component, regardless of size and with the same pressure. ❸ Pressure adjustment ❶ 580 Multipurpose anglenose lockgrip pliers ASME B maintenance applications. longer working life. A B C H L
43 Lockgrip pliers Longnose automatic lockgrip pliers ASME B longer working life. A B C E H L , Compact lockgrip pliers SERIES SERIES COMPACT LOCKGRIP PLIERS The compact 507 range offers two major benefits Versatility provided by the slipjoint system designed and developed by Facom that combines: Slim profile and precision 507A Shortnose compact lockgrip pliers ASME B
44 Lockgrip pliers Pliers Circlip pliers Lockgrip pliers Longnose compact lockgrip pliers ASME B Singlesetting lockgrip pliers 513 Shortnose single setting lockgrip pliers ASME B A B C H L A , , Longreach single setting lockgrip pliers ASME B A maxi C H L
45 Lockgrip pliers "Metalworking" lockgrip pliers Arcwelding lockgrip pliers ASME B A maxi B C 502A A "Cclamp" arcwelding lockgrip pliers ASME B channels. A maxi B C E H L 504A A A Lockgrip pliers for round sections ASME B A maxi B C Lockgrip pliers for angle sections ASME B A maxi B C
![500 sections and deep channels A maxi B C E H L [kg] 514.](/docs-images/80/81600050/images/46-1.jpg "45R 45 45 19 90 175 0,270 514A.")
46 Lockgrip pliers Pliers Circlip pliers Lockgrip pliers 8 514A514A.R Longreach lockgrip pliers ASME B sections and deep channels A maxi B C E H L [kg] R , A , A , A.240R , A ,705 A Bar clamp lockgrip pliers 520A Lockgrip Gclamps ASME B B C H L [kg] 520A , A , A , Gclamp pliers with sliding jaw ASME B B C E E1 H L [kg] , ,
47 End nippers Heavyduty end nippers CUTTING EFFORT REDUCED TO A MINIMUM HIGH PERFORMANCE NIPPERS AND CUTTERS For tying and cutting in one operation Maximum cutting power. 495A Heavyduty end nippers NF ISO 9242, ISO 9242, DIN ISO 9242 hand. life. B C E H L 495A.20EL 10, A.22EL 31 10, A.25EL 35 12, A.28EL 35 12, A.30EL 35 12, Heavyduty end nippers 491 End nippers NF ISO 5748, ISO 5748, DIN ISO 5748 life. B C E H L G 39 11, G 39 11, G 43 12, For bolt croppers see p. 612 For PVC grip pliers see p
48 Special pliers Pliers Circlip pliers Lockgrip pliers 8 PLASTICS CUTTERS SPECIAL CUTTERS TO REMOVE TAILS AND BURRS FROM INJECTIONMOULDED COMPONENTS. Flush cut Plastics cutters 395 Diagonal plastics cutters B C d maxi E L plastics cutters B E H L ,
49 Special pliers Motorists pliers 186 Motorists pliers NF ISO 9343, ISO 9343, DIN ISO 9343, ASME B B C E E1 L 186.7CPG , CPG ,5 7, CPG ,5 250 Extralong reach halfround nose pliers Extralong reach halfround nose pliers C d E E1 E2 L EG 73 3,
50 Special pliers Loweffort cutters Diagonal cutters Pliers Circlip pliers Lockgrip pliers NF ISO 5749, ISO 5749, DIN ISO 5749, ASME B mm. 8 B C E L EL Endcutters NF ISO 5748, ISO 5748, DIN ISO 5748, ASME B d maxi B C E H L 191A.22EL 9 2, C H E L "Connector" pliers 410 "Connector" pliers ASME B connector sleeves, tubes, lamps or wire looms, etc. mm. B C E L S
51 Plier sets and modules 184.J2 "Mechanics" set Multigrip pliers 170A. x 50 mm. 184.J3CPE "Maintenance" set End cutters CPE. Angled halfround nose pliers CPE. 184.J4CPE "Electrical fitters" set Wire strippers CPE. Halfround nose pliers CPE. 3 screwdrivers for slotted heads, 1,000 V insulated 516
52 Plier sets and modules Pliers Circlip pliers Lockgrip pliers J5VE "Electricians" set CPE.3 3piece CPE plier set CPE.4 4piece CPE plier set VE.3 3piece set of 1,000 Volt pliers Angled halfround nose pliers VE
53 Plier sets and modules MODM.CPE1 Foam 4piece plier set Largecapacity lockgrip pliers 501. PM.MODCPE1 foam tray. MOD.CPE 3piece "mechanics" CPE plier module MOD.TE 3piece "mechanics" TE plier module MOD.VE 3piece EN 60900compliant 1,000 Volt VE plier module Standard wire strippers VE. MOD.PR4 PR4 2piece adjustable plier module Multigrip lockgrip pliers T5.L. Tray PL.330. MOD.PR5 PR5 2piece adjustable plier module Multigrip lockgrip pliers T5.L. Tray PL
54 Plier sets and modules Pliers Circlip pliers Lockgrip pliers 8 MOD.PR7 PR7 2piece adjustable plier module Shortnose lockgrip pliers 500. Tray PL.330. MOD.PR8 PR8 2piece adjustable plier module Shortnose lockgrip pliers 500. Tray PL.330. MOD.PR9 PR9 2piece adjustable plier module Longnose lockgrip pliers 501. Tray PL.330. MOD.PR11 PR11 2piece adjustable plier module Multigrip lockgrip pliers T5.L. Tray PL.330. MOD.PR12 PR12 2piece adjustable plier module Tray PL
LIERS P
70 73 80 85 87 91 95 96 P LIERS 97 99 100 101 103 104 105 71 BOST pliers Flanged trivet Master clearance. Shot-blasted finish Transparent anticorrosion varnish. Very high reliability of the unlimited use
Pliers Multigrip pliers 372
368 www.facom.com 8. Pliers Multigrip pliers 372 Circlip pliers 392 Locking multigrip pliers... 372 Standard multigrip pliers... 374 Notch-joint multigrip pliers... 375 Automatic multigrip pliers... 376
Power and Precision. Pliers. Multigrip Pliers. Multigrip Pliers
Superior cutting edge hardness thanks to metallurgical and heat treatment advances Superior grips Ergonomic, spatula shaped handles Safety grip guard Handle springs tested to 1,000,000 cycles Highly solvent
Pliers sets p.172. Multigrip pliers p.174. Combination pliers p.174. Cutting pliers p.175. Long nose pliers p.176. Circlips pliers p.
170 PIERS Pliers sets p.172 Multigrip pliers p.174 Combination pliers p.174 Cutting pliers p.175 ong nose pliers p.176 Circlips pliers p.178 End nippers p.180 ock-grip pliers p.180 1000 VOTS PIERS AND
PLIERS MECHANICAL ENGINEERS PLIERS SET MULTIGRIP PLIERS COMBINATION PLIERS CUTTING PLIERS GRIPPING PLIERS CIRCLIPS PLIERS ...
PIERS...140 MECHANICA ENGINEERS PIERS SET...139 MUTIGRIP PIERS...140 COMBINATION PIERS...140 CUTTING PIERS...141 GRIPPING PIERS...143 CIRCIPS PIERS...144 OCK-GRIP PIERS...145 END NIPPERS 1000 VOTS PIERS
STANDARDS Conform to standards: ISO 8976 / ISO 5745 / ISO 5749
STANDARDS Conform to standards: ISO 8976 / ISO 5745 / ISO 5749 ENGINEERS CUTTING PIERS - HEAVY DUTY CUTTING PIERS Designed to offer perfect versatility whatever the cutting load. CUTTING EDGES Cutting
Diagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
Professional Pliers. Quality to Depend on
Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic
PROMPT TRADING CO. Ph. No.: FOR RESCUE
FIRED UP FOR RESCUE 78 When it comes to rescuing life and limb, every movement must be just right. This day. Any obstacles in their way, such as a locked access point, present an immediate danger to those
Pliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces
Content Pliers. Page Article group Page Article group Heavy Duty Combination Pliers. 197 Heavy Duty Combination Pliers 198 Long Round Nose Plier 198 Long Flat Nose Plier 198 Chain Nose Pliers, straight
Stanley Hand tools Stanley FatMax push-lock adjustable joint pliers. 3 piece Stanley FatMax pushlock. Stanley FatMax groove joint pliers.
Stanley FatMax push-lock adjustable joint pliers Slip-resistant Bi-Material handle for a comfortable grip. Multipurpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick
Pliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3
SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3 : Weight: 239 kg. Qty JET.8GM3 1 JET+ 8-drawer roller cabinets - 3 modules per drawer JET.C4GM3 1 JET+ 4-drawer chest - 3 modules per
NEWS KNIPEX Quality Made in Germany
NEWS 2014 KNIPEX Quality Made in Germany Product videos KNIPEX Pliers Wrench XL Pliers and a wrench in a single tool The unique installation tool now also in 400 length. For opening widths up to 85 / 3
High Leverage Combination Pliers
Wiha Pliers & Cutters, professional quality at competitive prices. A wide selection covering most applications in which pliers & cutters are required. 64HRC Cutting Edges Wiha SoftGrip Pliers & Cutters
Angled combination pliers
COMBINAION LIES 8248 Angled combination pliers Specially offset teeth in the grip surfaces for best-possible gripping on pipes and screws A pliers head angled at 60 goes easy on your joints and tendons.
Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm
575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18
Pipe wrenches Tube cutters Bench yoke vices. Three stands Other plumbing tools Sets of pipe wrenches. Ergonomic shape
Plumbing tools Pipe wrenches Tube cutters Bench yoke vices Three stands Other plumbing tools Sets of pipe wrenches Numerous additional parts The range of pipe wrenches is complemented by other tools dedicated
Z Order-No ½ ½ x
www.wiha.com Safety note: When working with cutting pliers beware of wire ends flying away. Please wear safety glasses. Combination pliers and high-leverage combination pliers. Needle nose pliers with
INNOVATIONS. KNIPEX Siphon and Connector Pliers. Exclusively distributed by MADE IN GERMANY
MADE IN GERMANY INNOVATIONS KNIPEX Siphon and Connector Pliers For siphons, tube fittings and connectors up to 80mm diameter Fine adjustment for ideal adjustment to diverse diameters Robust, heavy duty
Product #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
Professional. Pliers/Cutters & Crimpers. Complete Pliers/Cutters Program
2015 Professional Pliers/Cutters & Crimpers Complete Pliers/Cutters Program 2 Toll Free: (800) 494-6104 Insulated Pliers/Cutters Insulated Inomic Pliers escription Page escription Page Insulated Lineman
MECHANICS TOOLS. Back
MECHANICS TOOLS Back FULLER AND FULLER PRO SLIP JOINTS Designed by professionals for professionals, FULLER PRO Slip Joint and Groove Joint Pliers offer a lifetime of performance we guarantee it. The FULLER
85 Smart Grip, the Water Pump pliers with automatic adjustment
85 Smart Grip, the Water Pump pliers with automatic adjustment patented DIN ISO 8976 The adjustment procedure to match with the workpiece acts self-controlled with the SmartGrip. Position the pliers, press
AGRICULTURE RANGE. KNIPEX CoBolt Compact Bolt Cutters
AGRICULTURE RANGE Fendt KNIPEX CoBolt Compact Bolt Cutters precision cutting edges for soft and hard wire as well as piano wire cuts components like bolts, nails, rivets, etc. up to 5.2 dia. exceptional
New Products. KNIPEX Quality Made in Germany. KNIPEX-Werk C. Gustav Putsch KG. Your distributor. Oberkamper Strasse Wuppertal (Germany)
KNIPEX Quality Made in Germany Your distributor L100 02090/01/02.10/9.000/EN KNIPEX-Werk C. Gustav Putsch KG Oberkamper Strasse 13 42349 Wuppertal (Germany) Tel.: +49 (0) 202 47 94-0 Fax: +49 (0) 202 47
Wiha Professional. Quality down to the last detail. Diagonal cutters and heavy duty diagonal cutters. Diagonal cutters and stripping pliers.
Wiha Professional. Quality down to the last detail. Diagonal cutters and heavy duty diagonal cutters. Diagonal cutters and stripping pliers. Z 12 0 05 Diagonal cutters Professional. Semi-circular, swedish
Pliers VDE. Verbindungen mit System The Power of Partnership
Pliers VDE Verbindungen mit System The Power of Partnership Pliers VDE VDE Cable cutter for NYM and NYY cable fully insulated suitable for Cu and aluminium cable opening up to 16 mm 160 KL010160IS 225
The KNIPEX brand stands for reliability in every single tool.
Mini-Catalog The KNIPEX brand stands for reliability in every single tool. If you need a tool to get the job done the first time, every time, make sure to select KNIPEX. In this mini-catalog, you will
Especially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
A range to get a grip of every situation, plus a new even faster trigger clamp. Clamps Vices Pliers Pincers & Snips
A range to get a grip of every situation, plus a new even faster trigger clamp Clamps Vices Pliers Pincers & Snips 300 305 309 338 HOW TO CHOOSE THE BEST CLAMP TO SUIT YOUR NEEDS In making your selection
20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered
20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3
SALE 25% 39 Piece Security Bit Set. On Wiha Quality Tools. WIHA Tools Canada
WIHA Tools Canada Valid until Dec 31st, 2012 25% On Wiha Quality Tools Drive-Loc 33 Pc. Multi Blade Tray Set Includes Both Soft Cushion Grip & MicroFinish Non-Slip Grip Handles Slotted: 3, 3.5, 4, 4.5,
NEWS Innovations. MADE IN GERMANY SINCE 1882
NEWS 2015 17 Innovations. MADE IN GERMANY SINCE 1882 INNOVATIONS 2016 Needle-Nose Combination Pliers 7 Precision Electronics Gripping Pliers 13 KNIPEX CoBolt XL 10 Dismantling Pliers 6 Precision Circlip
Unrivalled cutting performance
PLIERS Perfect material processing CIMCO pliers perform brilliantly in punishing everyday use. Both material and design are designed for a tough workload. The high-alloy steels used are specially designed
PLIERS MECHANICAL ENGINEERS PLIERS SETS MULTIGRIP PLIERS COMBINATION PLIERS CUTTING PLIERS GRIPPING PLIERS CIRCLIPS PLIERS
PIERS...160 MECHANICA ENGINEERS PIERS SETS...162 MUTIGRIP PIERS...162 COMBINATION PIERS...163 CUTTING PIERS...165 GRIPPING PIERS...166 CIRCIPS PIERS...168 END NIPPERS...168 OCK-GRIP PIERS 1000 VOTS PIERS
03 Pliers and cutters
0 Pliers and cutters Heavy-duty combination pliers 47 Combination pliers 48 Water pump Cutting pliers 49 50 pliers Insulated pliers 51 Circlip pliers 54 ocking pliers 55 Mini pliers 56 Pincers 58 Bolt
Pliers for Electrical Installation 13
Pliers for Electrical Installation 13 The all-rounder for professionals Multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, 6 functions in one
Combination Pliers. Pliers. Long Nose Pliers, straight. Bent Nose Pliers, 200 mm. Flat Nose Pliers, 160 mm 2013/2014
Combination Pliers - satin nickel plated - with slip guard/ soft grip handles - red/black 325 Combination Pliers, Length 165 mm 326 Combination Pliers, Length 175 mm 327 Combination Pliers, Length 200
Wire Rope Cutter NEW!
SPECIALS 2018 Spend $300 or more* and receive a FREE Limited Edition KNIPEX Cobra in a collectable metal tin! EDITION. LIMITED EDITION. LIMITED EDITION. LIMITED First 200 entries only! Wire Rope Cutter
Cobra No INDUSTRY RANGE. KNIPEX Cobra Hightech Water Pump Pliers. Cobra Set
INDUSTRY RANGE KNIPEX Cobra Hightech Water Pump Pliers fast push-button adjustment directly on the workpiece, no unintentional slipping of the joint fine adjustment for optimum adaptation to different
Testing burning behaviour KNIPEX uses only flame-resistant and self-extinguishing plastics for insulation.
Testing electrical insulation After submersion in water for 24 hours, the tools are tested with AC 10,000 V for 3 minutes including measuring of the leakage current. The reading of the leakage current
Professional. Pliers/Cutters & Crimpers. Complete Pliers/Cutters Program
2018 Professional Pliers/Cutters & Crimpers Complete Pliers/Cutters Program 2 Toll Free: (800) 494-6104 Insulated Pliers/Cutters escription Page Insulated Lineman s Pliers 4 Insulated Combination Pliers
AUTOMOTIVE RANGE NEW. Spring Hose Clamp Pliers. Cobra QuickSet Hightech Water Pump Pliers
AUTOMOTIVE RANGE Spring Hose Clamp Pliers can be used for standard, space-saving and spring wire hose clamps and for spring band clamps up to 70 mm nominal size maximum jaw opening 80 mm; over 40 mm clamping
Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
Blackhawk by Proto pliers are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction
PLIERS DESIGNED TO GET THE JOB DONE Blackhawk by Proto are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction and heat-treated for strength
AUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS
WIRE STRIPPERS & CUTTERS SA822, CCP AUTOMATIC WIRE STRIPPER Strip No. 8 to 22 AWG wire quickly and easily. Features jaws that grip and strip wire with a single squeeze of the handles before returning to
CUTTERS CUTTERS
14 www.eclipsetools.com High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter Oil hardened & tempered Hot-formed
FULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
Locking Tools, Plier Tr s a & dit W ionren al c Plhe iers w r.i win.co n.c m
Locking Tools, Pliers Traditional & Wrenches Pliers www.irwin.com The Choice of Professional Tradesmen Since 1924 The IRWIN VISE-GRIP brand is legendary. Professional tradesmen have trusted the strength
Professional. Pliers/Cutters & Crimpers. Complete Pliers/Cutters Program
2017 Professional Pliers/Cutters & Crimpers Complete Pliers/Cutters Program 2 Toll Free: (800) 494-6104 Insulated Pliers/Cutters escription Page Insulated Lineman s Pliers 4 Insulated Combination Pliers
Code. Size 150mm 180mm 200mm MTS3790 MTS3800 MTS3810. Code STW STW STW Code WIL0280 COMBINATION PLIERS - VDE
COMBINATION PLIERS YELLOW/BLACK HANDLE COMBINATION PLIERS All purpose plier for cutting and gripping Satin finish Induction hardened edges for cleaner cutting and durability Non-slip double cushion grips
NEW! NEW! Air Assisted Windback Tool. Spring Hose Clamp Pliers. Auto Centre Punches. Part No A $ tridon.com.
Air Assisted Windback Tool n air operated ram applies pressure to the caliper piston, while the handle is rotated by hand n easy to use works on standard workshop air supply n reversible works on both
CUTTERS CUTTERS
www.eclipsetools.com 14 co s. nt ne po om ec lin on m High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter
Pliers & Wrenches 103
Pliers & renches 103 4 Pliers & renches Kincrome Plier Range The extensive Kincrome and Supatool Plier range includes conventional combination, long nose and diagonal cutting pliers. These popular pliers
Pliers. Contents. Pliers. Pliers Introduction E.2 E.1. VDE-insulated combination pliers E.3. VDE-insulated diagonal-cutting pliers E.
Contents Introduction.2 VD-insulated combination pliers.3 VD-insulated diagonal-cutting pliers.4 VD-insulated telephone pliers.5 VD-insulated flat- and round-nose pliers.6 VD-insulated special function
Tongue & Groove Slip Joint Diagonal Cutting Lineman s End Cutting Needle Nose Long Reach Locking Retaining Ring Wire Stripper Snips Pocket Knives
Tongue & Groove Slip Joint Diagonal Cutting Lineman s End Cutting Needle Nose Long Reach Locking Retaining Ring Wire Stripper Snips Pocket Knives TONGUE AND GROOVE, SLIP JOINT, DIAGONAL CUTTING PLIERS
Series. The Journeyman line of hand tools represents the best of Klein quality and workmanship combined with the latest innovations in handle design.
The line of hand tools represents the best of Klein quality and workmanship combined with the latest innovations in handle design. State-of-the-art dual material molding process Induction hardened cutting
2018 PROGRAMME - PLIERS, SNIPS
2018 PROGRAMME - PLIERS, SNIPS Our Quality, in Your Brand Private About Ceta Form For the last 43 years, Ceta Form has been recognized as a specialized designer and manufacturer of hand tools. At our factory
PLIERS & WRENCHES. Pliers & Wrenches LOCKING TOOLS PLIERS WRENCHES
4 PLIERS & WRENCHES The Vise-Grip Locking Tool was invented in 1924 by a blacksmith in a small town of DeWitt, Nebraska. William Petersen was a Danish immigrant who invented the first locking pliers in
Introduction To Automotive Technology
Introduction To Automotive Technology UNIT 4: BASIc hand Tools LESSON 2: TYPES OF SCREWDRIVERS AND PLIERS I. Screwdrivers A. The standard screwdriver has a straight blade for turning screws with a slot
11-Piece Insulated Tool Kit
11-Piece Insulated Tool Kit Part Number:: 474-145 1000V Insulated to IEC 60900 Set includes: Phillips Head Screwdriver #1 x 3", Phillips Head Screwdriver #2 x 4", Phillips Head Screwdriver #3 x 6", Slotted
Industry runs on electricity, which makes you a vital relay station.
Industry runs on electricity, which makes you a vital relay station. Proto knows you keep the lights on. Our electrical line includes more than 300 specialized tools to cut, crimp, bend, move, or secure
Kinetic Reflex T -Stripper Wire Stripper
Invented and manufactured at our Sycamore, Illinois facility, the T -Stripper line is the leading brand name in the world. Kinetic Reflex T -Stripper Ergonomic handles with Santoprene thermoplastic grip
Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and
Ideal. Ergonomic, Cushion-Grip, Vinyl Coated
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 353029 8" Dig Plier W/Ang Head Ideal Catalog Number 353029 Manufacturer Ideal Smart-Grip High-Leverage Diagonal-Cutting,
Pull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
Lifetime Warranty Everchamp Tools and Equipments. Desmond
Lifetime Warranty Product Highlights Product Highlights ABOUT US SATA hand tool program is one of the leading hand tool brands owned by Apex Tool Group. Apex Tool Group was formed in July 2010 as a joint
Summer/Fall 2018 Promo Sale Prices Good August 1st - October 31st, 2018
Summer/Fall 2018 Promo Sale Prices Good August 1st - October 31st, 2018 INSULATED 50 Piece Set 1000Volt proturn 32874 50 Piece Insulated Tool Set. Insulation According to VDE 0682/part 201, EN/IEC 60900,
Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
Decide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)
Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel
GENERAL TOOLS. 6.0 Pliers / Tweezers Tools Bolt cutters. 6.1 Hammers / Chisels / Centre punches / Scrapers & removers / Scissors & shears
0 Pliers / Tweezers Tools Bolt cutters Page 922 953 1 Haers / Chisels / Centre punches / Scrapers & removers / Scissors & shears Page 954 983 2 Bench shears Vices Screw clamps Page 984 995 3 Plumbing tools
Bailey Bench Planes. Spokeshave mm (Straight) mm (Curved) 1000V insulated grips Precise jaw gap for wire work
HAND TOOLS PLANES BENCH Plastic Organiser - Small Manufactured from PP recyclable Individual compartments for bits and pieces of all kinds Features 21 dividers W: 378mm D: 290mm H: 61mm Part Number: 07033
KNIPEX Quality Made in Germany. Product Presentation. at the Point of Sale. Preliminary version - for internal use only!
KNIPEX Quality Made in y Product Presentation at the Point of Sale 2018 1 KNIPEX ErgoStrip counter display 10 parts > With 10 KNIPEX ErgoStrip in blister pack > Display made of high-quality cardboard >
JourneymanTM Series. Journeyman TM Series. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P JourneymanTM Series r o f e The Journeyman line of hand tools represents the best of Klein quality and workmanship combined with the latest innovations in handle design. s s i o n a l s... S i
PRODUCT CATALOGUE Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3
BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77
Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
Pliers. Side Cutters / End Cutting Nippers 373. Combination Pliers 370. Flat Nose / Round Nose Pliers 376. Mechanics Pliers 379.
364 365 Pliers Combination Pliers 370 Side Cutters / End Cutting Nippers 373 Flat Nose / Round Nose Pliers 376 Mechanics Pliers 379 Bowden cable cutter / Cable Shears 380 Wire-stripping pliers 382 Electronic
Pliers. Pliers Sets 52 Standard Pliers 54 VDE Pliers 60 Locking Pliers 61 Retaining Ring Pliers 62 Special Pliers 63
At Blue-Point, we created a broad range of high performance pliers for most applications today while keeping at a very affordable price. Like our screwdrivers, we also adopt a dual compound design for
General Catalogue 2007
General Catalogue 2007 ABC Technical Basics TIP: page 2 with symbols and cutting capacities. Open out the flap when working with the cataloque Cutting for cutting or nipping (Diagonal, Center and End Cutters,
Pliers. Pliers Circlip Pliers Insulated Pliers Grip Pliers Crimping Tools
Pliers Circlip Pliers Insulated Pliers Grip Pliers Crimpin Tools 260 261 Combination Pliers 6111 Polished head Grip material - PP + TPR DIN ISO 5746 Cuttin Capacties 6111-06 6-1/2 163 4.0 2.8 1.8 1.6 200
Side cutters and tip cutters
Side cutters and tip cutters FOR ALMOST EVERY APPLICATION Internal patented Erem Magic Spring The Magic Spring system used in Erem precision tools is unique. It is integral to the cutting head and provides
Journeyman TM Series. Series. Journeyman TM
Journeyman TM Series The Journeyman line of hand tools represents the best of Klein quality and workmanship combined with the latest innovations in handle design. 22 Side-Cutting Pliers Features: State-of-the-art
Choosing the right puller for the job. Types of Puller
Pullers Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality
Tools & Supplies. Side-Cutting Pliers. Tongue & Groove Pliers. Cable Cutters. Long-Nose Pliers. Long Nose. Side-Cutting
Tools & Supplies Side-Cutting Pliers withstands toughest applications Cuts hardened wire, bolts and ACSR Laser-hardened blades and serrated jaws for long-term durability High-leverage design provides 40%
Tin snips Bolt cutters Pruning shears. Cable shears insulated Cable shears Electricians scissors PVC pipe cutters. Superior quality steel
Shears Tin snips Bolt cutters Pruning shears able shears insulated able shears Electricians scissors PV pipe cutters Secure cut Designed for a secure and accurate cut through sheet steel, concrete reinforcement,
Special tool steel. Phosphate finish Piece Screwdriver Set- Slotted/Phillips
Hand Tools 1253105 Series Cable Cable Shears Shears Special tool steel Softgrip handles For cutting copper and aluminium cables Not suitable for steel wire and wire ropes Forged in Germany Phosphate finish
STEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
Erem will impress you
18 Cutters Erem will impress you Induction hardened blades in Rockwell hardness 63 65 HRC for exceptionally long life Internal patented Erem Magic Spring constant spring force more than 1 million cutting
GENERAL CATALOGUE. Pliers MADE IN GERMANY SINCE 1882
GENERAL CATALOGUE Pliers MADE IN GERMANY SINCE 1882 The pliers company KNIPEX Quality Made in Germany KNIPEX the company behind the pliers For over 130 years and four generations, we have been working
HAND TOOLS HAND TOOLS
Discover more at rspro.com 1253105 Series Cable Shears Series Cable Shears Special tool steel Softgrip handles For cutting copper and aluminium cables Not suitable for steel wire and wire ropes Forged
KNIPEX INNOVATIONS. KNIPEX Quality Made in Germany 2011/12
KNIPEX INNOVATIONS KNIPEX Quality Made in Germany 2011/12 All New Products at a glance No. Description 00 11 01 KNIPEX TwinKey No. Description 13 91 200 Pliers for Electrical Installation 13 91 200 SB
Clamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
Offer expires: January 31, Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS
Offer expires: January 31, 2012 Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS NEW PRODUCTS $159.95 $104.99 *To Order Use Part# D010102-SPL Limited Time Offer: Buy An 8 Piece Stubby Ratcheting
P l i e r s. I n s u l a t e d t o o l s V. - U n i v e r s a l p l i e r s - tools MC4CE MS4 MS11 MC11CE MC13CE MS13
MC4CE - U n i v e r s a l p l i e r s - MS4 P l i e r s MC11CE MS11 MC13CE MS13 Difference between insulated and insulating tools - Difference between insulated and insulating tools INSULATED TOOLS : Safety
KNIPEX-Cobra Water Pump Pliers
KNIPEX-Cobra Water Pump Pliers 6 sizes for workpieces up to 120 mm New product features of Cobra in mm and mm length: % expanded gripping capacity more comfortable hand position due to optimized fine adjustment
NEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
J2000-9NETP Fish Tape Pulling Pliers Heavy-Duty Cutting
Get a Hold on Comfort and Durability! J2000-9NETP Fish Tape Pulling Pliers Heavy-Duty Cutting Pulls flat steel fish tape without damaging the tape. J213-9NECR Side-Cutting Pliers Connector Crimping Soft,
HAND TOOLS TWEEZERS. vice - DRILL PRESS
Torque Wrenches & Inserts Clicking torque wrench with mount for interchangeable socket tools, rapid accurate setting using QuickSelect quick-action adjuster, with Quick Release safety lock, double stop