Content. Survey sales literature 170. Wrap / Unwrap Tools Bits Sleeves 175. Accessories 176. Spare Parts Index 211.
|
|
- Darleen Dalton
- 6 years ago
- Views:
Transcription
1 Content Page Survey sales literature 170 Wrap / Unwrap Tools Bits Sleeves 175 Accessories 176 Spare Parts Index
2 Survey Sales literature Description Order No. Wire-Wrap Catalogue D GB All sales literature available as PDF files on 170
3 Wrap / Unwrap Tools Electronic Powered Tools for Micro and Mini Wire-Wrap Applications - clockwise rotation 14G1A Order No. Model Description Price ( ) Light low voltage electrical Wire-Wrap tool G1A-230 Volt Wire-Wrap tool, AWG 34-24, 340,00 Conductor-Diameter 0,16-0,5 mm G1A-12 Volt Wire-Wrap tool without power Transformer, 298,96 AWG 34-24, Conductor-Diameter 0,16-0,5 mm 14YB3 Electronic Powered Tools for Wire-Wrap Applications - clockwise rotation Order No. Model Description Price ( ) Heavy duty electrical Wire-Wrap tool YB3-230/A Wire-Wrap tool, AWG 30-18, 385,00 Conductor-Diameter 0,25-1,0 mm YB3-230/A SEV Wire-Wrap tool, AWG 30-18, 385,00 Conductor-Diameter 0,25-1,0 mm YB3-230/A UK Wire-Wrap tool, AWG 30-18, 385,00 Conductor-Diameter 0,25-1,0 mm YB3-230/C Wire-Wrap tool, AWG 30-22, 399,00 Conductor-Diameter 0,25-0,6 mm YB3-230/C SEV Wire-Wrap tool, AWG 30-22, 399,00 Conductor-Diameter 0,25-0,6 mm 14R3G Battery Powered Tools - clockwise/counter clockwise rotation Order No. Model Description Price ( ) R3G Wire-Wrap tool, AWG 32-22, 395,00 Conductor-Diameter 0,25-0,65 mm Accessory Order No. / Model Description Price ( ) * Charger 230 V, 60 Hz 51, WW Charger without transformer 85,00 14YP1 14HP1C Air Powerd Tools - clockwise rotation Order No. Model Description Price ( ) 26100AA5 14YP1A Wire-Wrap tool, AWG 30-10, 715,00 Conductor-Diameter 0,25-1,0 mm 26110AA4 14YP1C Wire-Wrap tool, special design, AWG 30-20, 969,00 Conductor-Diameter 0,25-0,6 mm Hand Squeezed Tools Order No. Model Description Price ( ) 28000AC1 14HP1C Wire-Wrap tool, clockwise rotation, 113,00 AWG 30-22, Conductor-Diameter 0,25-0,65 mm 28010AB2 14HP1CLU Wire-Wrap tool, counter clockwise rotation, 111,50 AWG 30-22, Conductor-Diameter 0,25-0,65 mm *discontinued 171
4 Wrap / Unwrap Hand Tools Manual Wrapping Tools WRAP3F30 Universal Manual Wrapping Tool, AWG 30, Terminal 0,95 x 0,95 45,00 WRAPECOMAXI Manual Wrapping Tool, AWG 20, Terminal max. 1,34 x 1,34 28,70 WRAPECOMIDI Manual Wrapping Tool, AWG 26-22, Terminal max. 1,34 x 1,34 28,70 WRAPECOMINI Manual Wrapping Tool, AWG 30-24, Terminal max. 0,95 x 0,95 33,00 Manual Unwrapping Tools counter clockwise Unwrap tool, AWG 32-26, Terminal 0,5 x 0,5 15, Unwrap tool, AWG 32-26, Terminal 0,6 x 0,6 15, Unwrap tool, AWG 30-24, Terminal 0,56 x 0,91 13, Unwrap tool, AWG 26-20, Terminal 1,0 x 1,0 / 0,91 x 1,22 12, Unwrap tool, AWG 26-20, Terminal 0,8 x 1,4 / 0,8 x 1,6 15,50 A31478* Unwrap tool, AWG 24-18, Terminal 1,14 x 1,14 12,90 Manual Unwrapping Tools clockwise / counter clockwise Unwrap tool, AWG 32-26, Terminal 0,5 x 0,5 27, Unwrap tool, AWG 32-26, Terminal 0,6 x 0,6 27, Unwrap tool, AWG 30-24, Terminal 0,56 x 0,91 21,50 A26664 Unwrap tool, AWG 26-20, Terminal 1,0 x 1,0 / 0,91 x 1,22 / 0,8 x 1,4 / 0,8 x 1,6 20, Unwrap tool, AWG 24-18, Terminal 1,14 x 1,14 21,00 Manual Unwrapping Tools clockwise / counter clockwise with sleeve Unwrap tool, AWG 30, Terminal 0,5 x 0,5 / 0,6 x 0,6 35, Unwrap tool, AWG 26, Terminal 1,0 x 1,0 / 0,91 x 1,22 / 0,8 x 1,4 34, Unwrap tool, AWG 24, Terminal 0,8 x 1,6 / 1,14 x 1,14 30,70 Manual Unwrapping Tools clockwise / counter clockwise with isolated, spring loaded sleeve 420E Unwrap tool, AWG 20-26, Terminal 1,0 x 1,0 / 0,8 x 1,6 23,20 Unwrapping bit-sleeves assemblies clockwise rotation Unwrap bit-sleeve assembly, AWG 30-36, outside diameter of bit 2,36 mm 47, Unwrap bit-sleeve assembly, AWG 26-22, outside diameter of bit 3,18 mm 47, Unwrap bit-sleeve assembly, AWG 26-22, outside diameter of bit 3,96 mm 47,00 Unwrapping bit-sleeves assemblies counter clockwise rotation Unwrap bit-sleeve assembly, AWG 30-36, outside diameter of bit 2,36 mm 37, Unwrap bit-sleeve assembly, AWG 26-22, outside diameter of bit 3,18 mm 53,09 *discontinued 172
5 Bits for Standard and Modified Connections uninsulated wire bit sleeve For selection of bits and sleeves please use our Wire-Wrap catalogue Bits Model/Order No. Description AWG Terminal Price ( ) Wrap bit standard 20 1,52 x 2,30 55, Wrap bit standard 22 2,49 x 3,11 69, Wrap bit standard 20 2,31 x 3,11 75, Wrap bit modified 24 1,37 x 1,86 45, Wrap bit modified 20 1,07 x 1,86 45, Wrap bit standard 30 0,69 x 0,77 71, Wrap bit standard 30 0,81 x 0,89 52, Wrap bit modified 30 0,67 x 0,77 62, Wrap bit modified 30 1,52 x 1,62 55, Wrap bit modified 28 0,84 x 0,92 55, Wrap bit modified 26 1,35 x 1,76 46, Wrap bit standard 24 0,61 x 1,10 55, Wrap bit standard 24 1,25 x 1,74 46, Wrap bit standard 18 1,55 x 1,86 49, Wrap bit modified 18 1,55 x 1,86 81, Wrap bit standard 26 1,47 x 1,86 46, Wrap bit modified 22 1,25 x 1,86 46, Wrap bit standard 26 0,59 x 0,98 52, Wrap bit standard 28 1,68 x 1,75 52, Wrap bit standard 22 1,25 x 1,86 46, Wrap bit modified 24 0,61 x 1,10 55, Wrap bit modified 26 0,59 x 0,98 53, Wrap bit modified 26 1,60 x 1,86 48, * Wrap bit modified 24 1,19 x 1,69 59, Wrap bit modified 30 0,78 x 0,87 53, Wrap bit standard 20 1,07 x 1,68 52, Wrap bit modified 30 1,04 x 1,12 65, Wrap bit modified 30 0,84 x 0,92 53, Wrap bit modified 30 1,35 x 1,45 149, Wrap bit modified 28 0,78 x 0,87 53, Wrap bit modified 26 0,87 x 1,28 57, * Wrap bit modified 26 0,79 x 0,91 83, Wrap bit modified 26 1,22 x 1,42 78, Wrap bit standard 24 1,38 x 1,88 47, Wrap bit modified 26 1,22 x 1,42 82, Wrap bit modified 24 1,37 x 1,88 50, Wrap bit modified 26 1,37 x 1,88 50, Wrap bit modified 30 0,79 x 0,95 53, Wrap bit modified 30 0,78 x 0,87 136, Wrap bit modified 30 0,59 x 0,64 136,39 *discontinued 173
6 CSW Bits stripping wire groove and channel strip blade cutting window insulated wire wire cutting window sleeve bit Use our Wire-Wrap catalogue to select the bits and sleeves Bits Model/Order No. Description AWG Terminal Price ( ) CSW Wrap Bit 24 1,50 x 1,83 181, CSW Wrap Bit ,75 x 1,83 181, CSW Wrap Bit 24 1,50 x 1,83 168, CSW Wrap Bit 26 1,37 x 1,47 180, CSW Wrap Bit 24 1,37 x 1,47 180, CSW Wrap Bit 24 1,68 x 1,78 180, CSW Wrap Bit 26 1,37 x 1,47 178, CSW Wrap Bit 26 1,50 x 1,83 207, CSW Wrap Bit 26 1,50 x 1,60 227, CSW Wrap Bit 26 1,65 x 1,75 209, CSW Wrap Bit 22 1,50 x 1,60 196, CSW Wrap Bit 26 0,76 x 0,86 208, CSW Wrap Bit 24 1,50 x 1,88 242, CSW Wrap Bit 24 1,37 x 1,47 172, CSW Wrap Bit 22 1,37 x 1,47 172, CSW Wrap Bit 24 1,37 x 1,47 188, CSW Wrap Bit 22 1,37 x 1,47 164, CSW Wrap Bit 26 1,37 x 1,47 189, CSW Wrap Bit 24 1,37 x 1,47 198, CSW Wrap Bit 30 0,76 x 0,86 209, CSW Wrap Bit 22 1,37 x 1,47 178, CSW Wrap Bit 30 0,76 x 0,86 207, CSW Wrap Bit 26 1,37 x 1,44 136, CSW Wrap Bit 34 0,60 x 0,60 137, CSW Wrap Bit 26 0,76 x 0,86 207, CSW Wrap Bit ,37 x 1,47 136, WW CSW Wrap Bit 30 0,76 x 0,86 227,84 174
7 Sleeves uninsulated wire bit sleeve Use our Wire-Wrap catalogue to select the bits and sleeves Sleeves for Standard and Modified Connections Wrap sleeve 19, Wrap sleeve 19, Wrap sleeve 25, Wrap sleeve 30, Wrap sleeve 37, Wrap sleeve 34, Wrap sleeve 87, Wrap sleeve 19, Wrap sleeve 18,00 Sleeves CSW for Modified Connections * Cut-Strip-Wrap Sleeve 87, Cut-Strip-Wrap Sleeve 110, Cut-Strip-Wrap Sleeve 110, Cut-Strip-Wrap Sleeve 109, Cut-Strip-Wrap Sleeve 115, Cut-Strip-Wrap Sleeve 110, Cut-Strip-Wrap Sleeve 109, Cut-Strip-Wrap Sleeve 110, Cut-Strip-Wrap Sleeve 109, Cut-Strip-Wrap Sleeve 109, Cut-Strip-Wrap Sleeve 174, Cut-Strip-Wrap Sleeve 109, Cut-Strip-Wrap Sleeve 149, Cut-Strip-Wrap Sleeve 108, Cut-Strip-Wrap Sleeve 110, Cut-Strip-Wrap Sleeve 109, Cut-Strip-Wrap Sleeve 103, Cut-Strip-Wrap Sleeve 103, WW Cut-Strip-Wrap Sleeve 109,64 *discontinued 175
8 Accessories Filter Regulator Lubricator Order No. Model Description Price ( ) FRL018 Lubri-Control-Unit, air inlet R1/8'', 120,17 best range of application 0,03-04 m 3 /min Tool Box Model / Order No. Description Price ( ) Tool Box empty for 14YB3 Wire-Wrap tool, 47,00 dimension: 330 x 240 x 85 mm Strip Force Gauge Model / Order No. Description Price ( ) Strip Force Gauge. Spring gauge with dial, 835,00 range 10 kg (N100), Scale Division 100 g/n1-370 g Spring Hook midi 92, Spring Hook mini 92,00 Stripper Model / Order No. Description Price ( ) * Insulation Stripper, AWG 24 17, * Insulation Stripper, AWG , * Insulation Stripper, AWG 26 17, * Insulation Stripper, AWG , * Insulation Stripper, AWG 28 26, * Insulation Stripper, AWG 30 23,00 *discontinued 176
9 Spare Parts Model/Order No. Description Price ) Battery-Cell 2,4 V 25, Spring Hook midi 92, Spring Hook mini 92, Circuit board 14YB3 51, Motor 14YB3 112, Housing Cover Set left/right 14YB3 12, Gear Idler 19, WW O-Ring 1, Blade Rotor (5) 15, Plate End 70, Gear Idler (3) 55, Plate Idler 106, Spring 3, Index ASM 218, Shaft Index ASM 212, Motor ASM 318, Muffler Assembly 46, Wrap Handle 12, Shaft Drive ASM 42, Hook-Spring 22, Rack Gear 20, Adjusting Nut 1, Bracket 31, Clamp 13, Unwrap Bit-Sleeve Assembly 47, Unwrap Bit-Sleeve Assembly 47, Shaft Assy 13, Battery Cell 30, Battery Assembly 65, R3 Powerhead Case Assembly 10, Handle Assy 1990 Version 160, Power Supply 120 V 39,25 177
10 Index Spare Parts Model Page 14G R YB YP
11 14G1 14R3 179
12 14YB3 14YP1 180
Wrap/Unwrap Tools, Bits, Stripping Tools
Wrap/Unwrap Tools, Bits, Stripping Tools Discontinuation of all products effective as from 30.06.2010 Content Wrap/Unwrap Tools 229 230 Bits, Sleeves 231 233 Accessories 234 Stripping Tools 235 Spare Parts
More informationContent. Survey sales literature 170. Wrap / Unwrap Tools Bits Sleeves 175. Accessories 176. Spare Parts Index 211.
Content Page Survey sales literature 170... Wrap / Unwrap Tools 171-172... Bits 173-174... Sleeves 175... Accessories 176... Spare Parts 177-180... Index 211... 169 Survey Sales literature Description
More informationWire-Wrap is the original wire-wrapping tool developed in the late 1950's and is a registered trade mark of Cooper Industries, Inc.
Wire-Wrap is the original wire-wrapping tool developed in the late 1950's and is a registered trade mark of Cooper Industries, Inc. Wire-Wrap tools and equipment are used throughout the TV, computer, telecounication
More informationWrap/Strip/Unwrap Tools. Hand Unwrapping Tools
Wrap/Strip/Unwrap Tools Regular Wrap Tools Terminal Hole Terminal Outside Part No. Wire Size Diameter Hole Depth Diameter AWG mm In. mm In. mm In. mm HSR224 22-24 0.65-0.50.075 1.90 1.50 38.1.213 5.4 HSR30
More informationCooperTools. Erem Weller Wire-Wrap Xcelite ELECTRONIC TOOLS
CooperTools Erem Weller Xcelite ELECTRONIC TOOLS ELP HELP HELP H? HELP HELP WIRE- WRAP CONNECTIONS The Connection Cooper Tools now includes wrapping bits and sleeves for virtually limitless applications.
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR SHAFTS - NORMAL TYPE - ➁ 4 4 6 8 9 10 s 0,4 0,4 0,6 0, 0,8 0,8 1 1 ring d 2,, 4,,6 6,,4 8,4 9, d4 8,6 10, 11, 1, 14, 16 1 d2 2,8,8 4,8, 6,,6 8,6 9,6 groove m (H1) 0, 0, 0, 0,8 0,9 0,9
More informationProfessional Pliers. Quality to Depend on
Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic
More informationMajor 5001 Wire Stripper
Major 5001 Wire Stripper F e a t u r e s Stripping of 14 to 30 awg wire without blade changes Complete or partial removal of the insulation Small space required 7" x 15" 120 VAC Power Virtually maintenance
More informationStrippers. Global website Sales support. Stripping flat telephone cables
Strippers Stripping flat telephone cables Stripping wires Gripping Cutting wires Wire spring 2 blade stripping coaxial cables is outcome 3 blade stripping coaxial cables 3 is Cutting wires For cutting
More informationTECHNICAL INFORMATION Models No. Description
TECHNICAL INFORMATION Models No. Description KP0810, KP0810C Power Planer 82mm (3-1/4") W PRODUCT P 1 /11 CONCEPT AND MAIN APPLICATIONS Model KP0810 features the following user-friendly advantages: *Left
More informationMain Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More information94MB Geared Machine Survey Form Motion Control Engineering, Inc. Phone: Fax:
Page 1 of 8 MCE TO COMPLETE THIS INFORMATION Drawing Number: Installation Date: Engineer Name: Delivery Date: Comments: CUSTOMER INFORMATION Customer Name: Job Name: Customer Address: Contact Name: Contact
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More information.com More than a machine. Power your life
Hydraulic Clamp 50mm Heavy Duty Radial Drilling Machine with Variable Speed Proven Performance, Quality and Cost-Effeteness www.maxnovomachine +86-514-87892928 info@maxnovomachine This kind of MM-R50V
More information700/705/710. Vehicle Mounted Brake Lathe & Rotor Driving Unit. Parts Identification
700/705/710 Vehicle Mounted Brake Lathe & Rotor Driving Unit READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine
More informationMaterial HRC Body Handle. Model No. SR-363A. Blister card SR-363B. Individual. Model No. 1PK-3001E. Blister card 1PK-3002E. 7 In 1 Tool. Model No.
CP-3001D / CP-3002D Precision Wire Stripper SR-363A/SR-363B 2 in 1 Round Cable Cutter & Stripper The stripper is processed by CNC machining process to ensure its accuracy. 6 49 5 Ø12 156 Stripping wires
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
More informationCATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
More informationCATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
More informationVARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL
VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4
More informationOperator's manual. TruTool TKF 1100 (1A1) TruTool TKF 1101 (1A1)
Operator's manual TruTool TKF 1100 (1A1) TruTool TKF 1101 (1A1) Table of contents 1 Safety 3 1.1 General safety information 3 1.2 Specific safety information for beveler 3 2 Description 5 2.1 Intended
More informationYAESTJ. Antenna Rotator Model G-450XL
YAESTJ Antenna Rotator Model G-0XL Antenna Rotator Model G-0XL m Thank you for your purchase of the Yaesu G-0XL Antenna Rotator. It has been designed to provide many years of trouble-free operation. Before
More informationSERVICE PARTS LIST. M18 FUEL SAWZALL Reciprocating Saw F56A BULLETIN NO CATALOG NO
47(5x) 46 45 00 44 0 59 43 42 84 51 57 46 47 48 59 83 64 77 48 47(2x) 49(2x) 40 58 See service note on page 5 41 82 51 40 41 42 43 44 45 87 52 27 28 34 57 29 (6x) 60 28 EXAMPLE: Component Parts (Small
More informationDi-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
More informationSpare part list. motor housing. piece. piece. stator 110V-120V assy 3. piece. rotor V assy 4. gear housing. piece. guide plate assy 6.
cid_etlx V. 7. BECKDOR For information only, will not be exchanged when altered! Date 0.0.00 08:3 Cnt-n 3700 motor housing 36373 stator 0V-0V assy 3 36379 rotor 0-0V assy 369 gear housing 366 guide plate
More informationEC centrifugal fan - RadiCal
RG-RD- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationSpare part list. piece rotor 110/115V assy. piece motor housing assy. piece stator 115V assy 8. piece grip frame assy 14. piece clutch gear assy 15
cid_etlx V. 0. FEHRMAN For information only, will not be exchanged when altered! Date 8.09.00 0:0 Cnt-no 7369 piece gear housing assy 73730 piece motor V assy 3 73690 piece cylinder 7368 piece motor housing
More informationJARVIS. Model Buster IV Forequarter Beef Splitting Band Saw Installation Instructions... 9 TABLE OF EQUIPMENT
Beef Splitting Band Saw EQUIPMENT SELECTION............. Ordering No. TABLE OF CONTENTS......................... Page Buster IV Forequarter Saw.... 4006058 Spring Balancer............. 4042023 Blade......................
More informationSymbols used. Move the part in the direction of the arrow. Set the clearance as indicated. Move the part to its highest or lowest position.
4.1999. This service manual was compiled for use when repairing the XL5300, 5200, 5100, 5030, 5020, 5010,PX300,200,100 Zigzag Stitch Sewing Machines. Use this manual, together with the Parts Catalog, when
More informationTapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y
W8VB The exploded assembly drawing should be used only for authoized service center. W8VB Item No. Part time 1 Magnetic Hex. Socket 2 Sub Stopper 3 O-Ring (S-16) 4 Locator (A) 5 Lock Sleeve (A) 6 O-Ring
More informationMagnetic Base Drilling Machine A100/32. Operators Instruction Manual And Spare Parts Listings
Magnetic Base Drilling Machine A100/32 Operators Instruction Manual And Spare Parts Listings Index Chapter 1. Technical Overview. Chapter 2. Warnings and Safety Instructions. Chapter 3. Operating Instructions.
More informationOperator's manual. TruTool TKF 1500 (1A1), (1B1)
Operator's manual TruTool TKF 1500 (1A1), (1B1) Table of contents 1 Safety 4 1.1 General safety information 4 1.2 Specific safety information for beveler 4 2 Description 6 2.1 Intended use 6 2.2 Technical
More informationRotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationPower Output. Spindle. 7.7 Inches (196 cm) 11.0 Lbs. (5.0 Kg)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual SUPER HEAVY DUTY VERTICAL GRINDERS 4 Horsepower Vertical Grinders 4 HORSEPOWER Model Number Throttle Type Power Output Weight
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationCALRAD 25 series - potentiometers
25 series - potentiometers audio /linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 2" dia. fits into 1 4" hole. Shaft 3 16" dia. Thread length 7 32", shaft length
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More informationBlackhawk by Proto pliers are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction
PLIERS DESIGNED TO GET THE JOB DONE Blackhawk by Proto are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction and heat-treated for strength
More informationApril 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
More informationYouth Explore Trades Skills
Youth Explore Trades Skills Connecting Wires Description All lights in a house must have proper wire connections in order to work. Residential electrical work requires electricians to join wires together
More informationTools. Crimping Tools 120. Contact Removal Tools 124. Workshop Tools 126
Crimping Tools 120 Contact Removal Tools 124 Workshop Tools 126 A wide range of crimping tools to suit popular terminals and connectors. Crimping Tools HDT-48-00 DE-D2682 Tight, complete crimp with minimal
More informationOperating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
More informationMAKING AGRICULTURE MORE ECONOMICAL
PARTS CATALOGUE VICTOR SERIES ROTARY TILLER MAKING AGRICULTURE MORE ECONOMICAL PM /REV. / SR NO MANUAL CODE MATERIAL DESCRIPTION QTY N/A AIR BREATHER /2" BSP (GTSR38) 2 3330 DIPSTICK 87MM (/2" BSP) 3
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationFRICTION PARTS SECTION 11-1 TP10449 ASSEMBLY NUMBER: 714 FRICTION FEED FOLDER DESCRIPTION: REV: BAUMFOLDER CORPORATION UNIT NAME:
SECTION - TP0449 FRICTION PARTS 74 FRICTION FEED FOLDER 74 SHEET OF TP0449 SECTION - 4 3 6 5 TOP LEVEL UNIT 60HZ 74 FRICTION FEED FOLDER 74F--F- SHEET OF 74F--F- FRAME PAR 74 FRICTION 43-097A GAPSETS,
More informationCUSTOM STRIPMASTER AND CUSTOM STRIPMASTER LITE WIRE STRIPPERS
CUSTOM STRIPMASTER AND CUSTOM STRIPMASTER LITE WIRE STRIPPERS UNIQUE BLADE DESIGN ONE-STEP SPRING ACTION STURDY METAL FRAME IDEALIND.COM CUSTOM STRIPMASTER WIRE STRIPPERS The Custom Stripmaster Wire Stripper
More informationSDE Standard Die Envelope Crimp Tooling
SDE Standard Die Envelope Crimp Tooling Standardize Your Crimp Tooling These versatile hand tools and dies are ideally suited for R & D, networking applications and on-site maintenance work. User-adjustable
More informationFREUD. Operating Instructions. JS104K Biscuit Joiner Kit
FREUD Operating Instructions JS104K Biscuit Joiner Kit Contents Safety General Safety Rules Additional Safety Rules for Biscuit Joiners Functional Description and Specifications Symbols Parts and Feature
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationTools for crimp contacts
Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered
More informationOperator's manual TKF english
Operator's manual TKF 104-1 english GB 9 Cutting tool 21 Eccentric shaft 38 36 Clamping screw ( = fastening screw for die carrier) 37 Cheesehead screw (2) to fasten handle 21 38 Handle (can be mounted
More informationMODEL 2510 & 2510 ECONOMINDER
ients wd MODEL 2510 & 2510 ECONOMINDER Service Manual IMPORTANT: Fill in pertinent information on page 3 for future reference. main head MODEL 2510 & 2510 ECONOMINDER job specification sheet JOB NO. *MODEL
More informationBevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR
T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationWire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers
Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids
More informationDRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger
DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice
More informationCustom Stripmaster & Custom Stripmaster Lite Wire Strippers
Custom Stripmaster & Custom Stripmaster Lite Wire Strippers Unique blade design covers a wide range of precision commercial and military stripping applications One-step spring action wire stripping increases
More informationMeasuring current transformers of the W, W series
Measuring current transformers of the W, W -8000 series W(-8000)_D00078_01_D_XXEN/09.2015 Measuring current transformers of the W, W -8000 series Product description The highly sensitive W and W -8000
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 00 Series End Drive Conveyors Table of Contents Warnings General Safety........................... Introduction....................................... Product Description.................................
More informationEC centrifugal fan - RadiCal
R3G9-RB- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationExploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
More informationCrimping and Cutting Tool for Connectors, Accommodates wire. From No. 10 to 22 Awg CRIMPING/CUTTING TOOL FOR CONNECTORS. from No.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1005 Crimping/Cutting Tool For Connectors Klein Tools Catalog Number 1005 Manufacturer Klein Tools Description Crimping
More informationEC centrifugal fan - RadiCal
RG5-RE7- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-746 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationTools for other contacts Tools for FOC contacts Crimping machine TC-C Crimping machine TK-M
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han-Yellock... 99.06 for contacts Han C... 99.09 for contacts D-Sub... 99.11 for other contacts... 99.12 for FOC contacts...
More informationFigure 1A. Solid Waste Can / Glass Shredder Assembly
Figure A. Solid Waste Can / Glass Shredder Assembly Figure B. Solid Waste Mod Plastics Shredder Assembly Solid Waste Can / Glass Shredder & Solid Waste Mod. I Plastics Shredder Assemblies FIG. INDEX PART
More informationBand-Master ATS Nano Pneumatic Banding Tool Operating Instructions
Band-Master ATS 601-118 Nano Pneumatic Banding Tool CONTENTS 601-118 Overview... 3 Safety.... 5 Initial Tool Set-up... 5 Regulator assembly mounting... 5 Attach tool head to regulator.... 6 Operating instructions...
More informationWiring Techniques for Wiring a Lamp
Supplies and Tools that you will need: Provided in your kit: Polarized lamp plug, 9 of SPT-1 18 AWG parallel lamp cord, bushings and grommets Items that you will need to provide: Phillips screwdriver,
More informationSeries 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om
Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment
More informationWIRE & CABLE FILS ET CÂBLES ALAMBRES Y CABLES. 63 Technical information. 64 Primary Wire. 66 Brake Cable & Portable Extension Cable
05 63 Technical information 64 Primary Wire 66 Brake Cable & Portable Extension Cable 67 SXL & Bonded Wire WIRE & CABLE FILS ET CÂBLES 68 Trailer Cable 70 Battery Cable 71 Welding Cable 72 Booster Cable
More informationEMS-2025scl 230v. Sliding Compound Mitre Saw Fig.1. Revision Date 26/01/2006
Fig.1 Fig.2 701 inc 2,702,703,704 1 Base 93 089100102700 Space washer Base Assembly Parts (A) 30.23 94 Screw, for base, 45 152 Miter scale label, 2 089100102002 Rubber feet 0.10 702 Pivot Shaft & Screw
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationParts Manual. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 SPDZTR 46 / 966657801 SPDZTR 42 CA / 966657901 SPDZTR 46 BF / 966658001 SPDZTR 48 / 966698601 SPDZTR 54 / 966658201 SPDZTR 54 / 966658301 SPDZTR
More information1.0 Receiver TAC Contact Insertion/Extraction. 2.0 TAC (Receiver) Module Installation/Removal. 3.0 Wiring Contact Insertion/Extraction
Downloadable Documents (Adobe Acrobat (TM) format) Click on the links below to view or download copies of VPC User Manual in Adobe Acrobat (.PDF) format. Note: If you would like printed copies of any of
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationPNEUMATIC FEED ASSIST
Pneumatic Feed assist 02-148 page 1/5 Product features The Pneumatic Feed Assist (PFA) provides an economical method to assist your wire feeder in moving wire trough the conduit in applications where long
More information5 Maintenance 5.1 Guideway and Wipers
5 Maintenance 5.1 Guideway and Wipers 5.1 Page 26 of 41 The grinding carriage runs with hardened rollers on hardened steel straps (2). The steel straps (2) are positioned on the grinding bed (1) and tensioned
More informationTS4001. Model # 10 inch Table Saw addendum SETUP & OPERATION MANUAL
SETUP & OPERATION MANUAL Features Powerful 13 amp motor Cast aluminum work table Riving knife Anti-kickback pawls Includes: 10 in. 24 tooth tungsten carbide tipped saw blade Rip fence Miter gauge Push
More informationStripmaster Wire Strippers
D Stripmaster and Stripmaster Lite Wire Strippers One-step stripping enhances productivity Spring-action motion increases leverage and reduces operator fatigue Precision-ground, knife-type blades provide
More informationFILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT
04 July, 2018 FILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT Document Filetype: PDF 293 KB 0 FILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT Alibaba.com offers 124 4 gauge wire connectors products. Unique Bargains
More informationApplication Tooling. Application tools to ensure PERFORMANCE RELIABILITY INTEGRITY PRECISION PRODUCTIVITY. The correct tool for the job INTRODUCTION
INTRODUCTION Application tools to ensure PERFORMANCE RELIABILITY INTEGRITY PRECISION PRODUCTIVITY. The correct tool for the job Every day, you count on your application tooling to be reliable and accurate.
More informationEC centrifugal fan - RadiCal
R3G3-RO36-8 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court
More informationCALRAD MINIATURE MULTI-CLICK DUAL CONTROLS 40 STEP P.C. MOUNT 11
25 Series - Potentiometers Audio & Linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 /2" dia. fits into 1 /4 hole. Shaft 3 /16" dia. Thread length 7 /32", shaft
More informationLISTA DE REFACCION MODELO LS1017L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
More informationJARVIS. Model Buster V Loin Drop Beef Loin Dropping Saw
Beef Loin Dropping Saw EQUIPMENT SELECTION... Buster V Loin Drop Saw Ordering No. 230V, 60Hz Model... 4006051 460V, 60Hz Model... 4006060 575V, 60Hz Model... 4006087 Spring Balancer... 4042038 Blade (133
More informationOperator's manual. TruTool N 200 (1A1) english
Operator's manual TruTool N 200 (1A1) english Table of contents 1. Safety...3 2. Description...5 2.1 Correct use...6 2.2 Technical data...7 3. Tool assembly...8 3.1 Changing the stroke rate...8 4. Operation...10
More informationLAKSHMI MACHINE WORKS LIMITED COIMBATORE , INDIA
Spare Parts Catalogue for Vario Clean LB9/2 Issue No. : 02 Month / Year : February 2016 Control No. : 63 194 10 00 Revision Date : Spinning System This Catalogue Belongs to the Mill : Order No. : Machine
More informationCopyright 2007 ES Manufacturing, Inc th Street North St. Petersburg, FL 33713
e-mail sales@esmfg.com US/Canada 800-55ES-MFG Documentation & Warranty Packet MB110 ( 600 rpm s) Thank you for purchasing the MB110 If properly operated and maintained, this Heavy Duty Fiber Cutter will
More informationPneumatic Drill / / Technical Specification
CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506
More informationSpare part list. piece rotor 220/240V SERVICE. piece brush holder 220V/240V assy 7. piece electronics 230V assy. piece protective sleeve DM10 9
cid_etlx V. 0. FEHRMAN For information only, will not be exchanged when altered! Date.05.003 09:39 Cnt-no 38 piece stator 0/0V SERV. 5 3 piece rotor 0/0V SERVICE 009 piece brush holder 0V/0V assy 7 3 piece
More informationThermal Wire Stripper
Thermal Wire Stripper Thermal Wire Stripper Blade not included Thermal wire stripper that ensures clean-cut removal of wire insulation High stripping perfmance ensures clean cut through highly heat-resistant
More informationHardwood Installation Products. Catalog No. 4
Hardwood Installation Products Catalog No. 4 Table of Contents Pages 1 2-4 5 6 7 8 9 Product Categories Moisture Meter & Self Leveling Concrete Restoration & Blades Abrasives Fastening Cutters & Accessories
More information2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationEC centrifugal fan - RadiCal
ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA
More informationTube Facing Tool.
www.swagelok.com Tube Facing Tool This manual contains important information for the safe and effective operation of the Swagelok TF72 series tube facing tool. Users should read and understand its contents
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement
More informationMaster-Feeder-System MFS V2
T E C H N O L O g y F O R T H E W E L d E R S W O R L d. Master-Feeder-System MFS V2 High precision... Constant & precise! MFS V2 the wire feeder system for highly automated laser welding and brazing equipment.
More informationHAND SHEARS NO. 12 AND NO. 24
OPERATOR S MANUAL & INSTRUCTIONS HAND SHEARS NO. AND NO. Di-Acro, Incorporated PO Box 9700 Canton, Ohio 7 7 Progress Street N.E. Canton, Ohio 70 0--9 0--00 (fax) Revised 0/0 Sale or distribution of manuals
More information