QUICK REFERENCE. A-Size (7/8 ) powerfast. D-Size (1 3/8 ) powerfast. M16 powerfast. M23 powerfast. M40 powerfast. 3 & 4 pole 14 AWG conductors

Transcription

1 QUICK REFERENCE A-Size (7/8 ) powerfast D-Size (1 3/8 ) powerfast M16 powerfast 3 & 4 pole 14 AWG conductors Tray rated-exposed run PVC cable STOOW cable available Up to 15 Amp, 600 Volt rated NEMA 1,3,4,6P IEC IP67 protection 3 & 4 pole AWG conductors Tray rated-exposed run PVC cable STOOW cable available Up to 30 Amp, 600 Volt rated NEMA 1,3,4,6P IEC IP67, IP68, IP69K protection 2-4 pole 12 & 14 AWG conductors Shielded versions available Tray rated-exposed run PVC cable Up to 20 Amp, 600 Volt rated IEC IP67 protection M23 powerfast M40 powerfast 6-9 pole AWG conductors for power, 18 AWG conductors for signal Shielded versions available AWM or tray rated-exposed run PVC cable Up to 30 Amp, 300 & 600 Volt rated IEC IP67 protection 4-8 pole 8 AWG conductors for power, 18 AWG conductors for signal Shielded versions available Tray rated-exposed run PVC cable Up to 42 Amp, 300 & 600 Volt rated IEC IP67 protection

2 QUICK REFERENCE Estimated hp ratings for D-Size powerfast (Based on 85% motor efficiency and 90% power factor.) Single Phase (2 Current Carrying Conductors) Pin Count 3-pin AWG Current (amps) 10 AWG AWG AWG 18 Voltage (volts) Power (hp) Three Phase (3 Current Carrying Conductors) Pin Count 4-pin AWG Current (amps) 10 AWG AWG AWG 15 Voltage (volts) Power (hp) Note: These tables are theoretical values and are for reference only. Values will vary based on load conditions, as well as condition, age and type of motor. Please consult a qualified electrician for specific product sizing requirements. Current limits for conductor gauge size taken from NFPA edition.

3 Industrial Automation D-Size powerfast Cordset Part Number Key G S D M 30 - *M D-Size (1 3/8") powerfast Cordset K = female connector, female threads S = male connector, male threads D-Size Power Configuration (blank)= straight W = right angle Coupling Nut Material A = anodized aluminum M= nickel plated brass V = stainless steel (blank)= TC-ER STOOW PVC cable jacket /S4000 = TC-ER PVC cable jacket Number of Wires / AWG / Color Codes 30 = 3x10 AWG BK, GN, WH 32 = 3x12 AWG BK, GN, WH 34 = 3x14 AWG BK, GN, WH 40 = 4x10 AWG BK, GN, RD, WH 42 = 4x12 AWG BK, GN, RD, WH 44 = 4x14 AWG BK, GN, RD, WH Insertion Point of Extension Cable 2nd Prefix* * Male connector listed 1st, female connector 2nd Example: GSDM GKDM 30-1M Extension Example: Cordsets G S D M G K D M 30 - *M Fax: (763) TURCK Inc. Minneapolis, MN B2006 J74

4 TURCK Industrial Connectivity Products D-Size powerfast Receptacle Part Number Key G K D F 30 - *M /14.5/NPT D-Size (1 3/8") powerfast Receptacle K = female connector, female threads S = male connector, male threads D-Size Power Designator for Receptacle Housing Material (blank)= nickel plated brass A = anodized aluminum V = stainless steel Thread Type Number of Wires / AWG / Color Codes 30 = 3x10 AWG BK, GN, WH 32 = 3x12 AWG BK, GN, WH 34 = 3x14 AWG BK, GN, WH 40 = 4x10 AWG BK, GN, RD, WH 42 = 4x12 AWG BK, GN, RD, WH 44 = 4x14 AWG BK, GN, RD, WH /14.5/NPT = 1/2-14 NPT /14.75/NPT = 3/4-14 NPT Fax: (763) TURCK Inc. Minneapolis, MN 55441

5 Industrial Automation M16 powerfast Cordset Part Number Key B S M * /S.. M16 powerfast Cordset K = female connector S = male connector Configuration M= straight Coupling Nut Material (Blank) = nickel plated brass K = nylon V = 316 stainless steel /S = consult factory, special /CS = consult factory, special Number of Wires / AWG / Color Code = 2x12 AWG WH, BK = 3x14 AWG WH, GN, BK = 4x14 AWG WH, GN, BK, RD Insertion Point of Extension Cable 2nd Prefix* * Male connector listed 1st, female connector 2nd Example: BSM BKM * Extension Example: B S M B K M * Cordsets M16 powerfast Receptacle Part Number Key B K F 22 - * /14.5/NPT M16 powerfast Receptacle K = female receptacle S = male receptacle Designator for Receptacle Thread Type /14.5/NPT = 1/2-14NPT threads /18.375/NPT = 3/8-18NPT threads /M20 = M20 threads /M18 = M18 threads Number of Wires / AWG / Color Code Housing Style (Blank) = front mount D = rear mount 22 = 2x12 AWG WH, BK 34 = 3x14 AWG WH, GN, BK 44 = 4x14 AWG WH, GN, BK, RD Fax: (763) TURCK Inc. Minneapolis, MN B2006 J2

6 Industrial Automation M23 powerfast Cordset Part Number Key C K M * /S.. M23 powerfast Cordset K = female contact holder, female threads S = male contact holder, female threads SS = male contact holder, male threads Connector Style M = molded plug body (Blank) = assembled connector Coupling Nut Material / Shielding (Blank) =nickel plated brass V = stainless steel S = shielded (Blank) = PVC jacket /S90= PUR jacket Number of Wires / AWG / Color Codes = 6x14 AWG WH, RD, GN, OG, BK, BU = 7x14 AWG RD, WH, WH/BK, BU, OG, BK, GN/BK, GN, RD/BK = 3x14 & 6X18 AWG RD, WH, WH/BK, BU, OG, BK, GN/BK, GN, RD/BK =6x12 AWG BU, RD, GN, BN, OG, YE =4x14 & 4X18 AWG BU, GN, WH, BK, OG, RD, WH/BK, RD/BK =6x12 AWG BU, RD, GN, BN, OG, YE =4x12 & 4X18 AWG BU, GN, WH, BK, OG, RD, WH/BK, RD/BK Insertion Point of Extension Cable 2nd Prefix* * Male connector listed 1st, female connector 2nd Example: CSM CKM Extension Examples: C K M C K M * /S.. Cordsets C SS M C K M * /S.. M23 powerfast Receptacle Part Number Key C K F * M23 powerfast Receptacle K = female contact holder, male threads S = male contact holder, male threads Designator for Receptacle Number of Wires / AWG / Color Codes 64-6 = 6x14 AWG WH, RD, GN, OG, BK, BU 74-7 = 7x14 AWG RD, WH, WH/BK, BU, OG, BK, GN/BK, GN, RD/BK 94-9 = 3x14 & 6X18 AWG RD, WH, WH/BK, BU, OG, BK, GN/BK, GN, RD/BK = 6x12 AWG BU, RD, GN, BN, OG, YE = 4x12 & 4X18 AWG BU, GN, WH, BK, OG, RD, WH/BK, RD/BK Mounting Style (Blank) = front mount D = rear mount F = flange MF = flange, rotating coupling nut Fax: (763) TURCK Inc. Minneapolis, MN B2006 J52

7 Industrial Automation M40 powerfast Cordset Part Number Key H S * /S.. M40 powerfast Cordset K = female connector, female threads S = male connector, male threads /S = consult factory /CS = consult factory (Blank) = assembled connector M = molded connector (currently not available molded) Shielding S = shield tied to coupling nut Housing Material (Blank) = nickel plated brass V = stainless steel Insertion Point for 2nd Connector* * Male connector listed 1st, female connector 2nd Example: HS HK Number of Power Wires 4 = 4 wires connected to power pins 3 = 3 wires connected to power pins Number of Control Wires Gauge of Power Wires 8 = 8 AWG wire to power pins 6 = 6 AWG wire to power pins 0 = 10 AWG wire to power pins Color Codes / Cable Type 279 = WH, BK, RD, GN, TC-ER PVC Yellow 313 = WH, BK, RD, GN, TC-ER PVC Yellow 314 = WH, BK, RD, GN, BK, WH, BN, BU, TC-ER PVC Yellow 315 = WH, BK, RD, GN, BK, WH, BN, BU, TC-ER PVC Yellow Gauge of Control Wires 0 = no connection or 20 AWG wire to control wins 6 = 16 AWG wire to control pins 8 = 18 AWG wire to control pins 0 = no connection to control pins 2 = 2 control pins connected 4 = 4 control pins connected Cordsets Extension Example: H S H K * /S Fax: (763) TURCK Inc. Minneapolis, MN B2006 J64

8 TURCK Industrial Connectivity Products M40 powerfast Receptacle Part Number Key H S F F * /S.. M40 powerfast Receptacle K = female connector, female threads S = male connector, male threads Designator for Receptacles Mounting Style F = flange MF = flange, rotating coupling nut Number of Power Wires 4 = 4 wires connected to power pins 3 = 3 wires connected to power pins Gauge of Power Wires Gauge of Control Wires 0 = no connection or 20 AWG wire to control pins 6 = 16 AWG wire to control pins 8 = 18 AWG wire to control pins Number of Control Wires 0 = no connection to control pins 2 = 2 control pins connected 4 = 4 control pins connected 8 = 8 AWG wire to power pins 6 = 6 AWG wire to power pins 0 = 10 AWG wire to power pins /S = consult factory /CS = consult factory Fax: (763) TURCK Inc. Minneapolis, MN 55441