*For complete material(s) information, refer to
|
|
|
- Amanda Fields
- 5 years ago
- Views:
Transcription
1 Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE Residential Design and CAD I Course Description EN 103. Residential Design and CAD I. 3 hours credit. Prerequisite: EN 101 with a C better. This course will enable the student to understand and apply concepts of basic residential design and its integration into computer-aided design (CAD). The student will analyze and design the necessary elements needed for a residence. Required Materials Stine. Residential design using AutoCAD SDC Publishing. *For complete material(s) information, refer to Supplementary Materials The student will provide an electronic storage device sufficient for saving CAD files, a three-ring binder, pencil, and notebook. Butler-Assessed Outcomes The intention is for the student to be able to 1. Apply CAD to the design of residential plans. 2. Demonstrate the use of CAD and its application in the field of residential design and architecture. Learning PACT Skills that will be developed and documented in this course Through involvement in this course, the student will develop ability in the following PACT skill area(s): Analytical Thinking Critical thinking Through design projects, the student will research and analyze needed information to complete the projects. Major Summative Assessment Task(s) These Butler-assessed outcome(s) and the Learning PACT skill(s) will be demonstrated by 1. Completing a final reflection on a portfolio of projects that evaluate both the knowledge and application of CAD in residential design. Skills or Competencies These actions are essential to achieve the course outcomes: 1. Identify and describe basic residential designs. 2. Complete a bubble diagram that identifies utilization of space. 3. Examine, identify, and describe the primary considerations needed in designing a residence. EN 103 Residential Design and CAD I 1
2 4. Identify various drawing techniques used in residential design. 5. Locate, draw, and describe all property lines, easements, and flood plain. 6. Design, draw, and describe the elements needed in a sleeping area and bathroom. 7. Design, draw, and describe the elements needed in a living area. 8. Design, draw, and describe the elements needed in a service area. 9. Describe and demonstrate land plotting and planning for a residence. 10. Design, draw, and describe a typical footing for a residential structure. 11. Design, draw, and describe a typical foundation/basement plan for a residential structure. 12. Describe the components of a residential floor system. 13. Design, draw, and describe the components of residential wall and ceiling system. 14. Design, draw, and describe the doors and windows of a residence. 15. Design, draw, and describe a residential stair system. 16. Design, draw, and describe a residential fireplace and chimney system. 17. Design, draw, and describe the basic components for a residential roof system. 18. Design, draw, and describe the elevations for a residence. 19. Complete an estimate of all products used in the residence (i.e., materials, appliances, construction costs). Learning Units I. World of residential architecture A. Cape Colonial B. Garrison C. Salt Box D. Southern Colonial E. Contemporary F. Ranch II. III. Basic house design A. One-story ranch designs B. One-and-one-half story designs C. Two-story designs D. Split-level designs E. Traffic Circulation Primary considerations A. Site considerations B. Community C. Costs D. Zoning E. Codes F. Topographical G. Family needs H. Quality of living I. Plan description EN 103 Residential Design and CAD I 2
3 IV. Drawing instruments and techniques A. Orthographic projection B. Three principal views C. Computer-aided design D. Use of a scale E. Dimensioning V. Room planning for sleeping areas and bathrooms A. Sleeping areas B. Bathrooms C. Accessibility for the Handicapped D. Furniture size and arrangement E. Minimum clearance F. Bath fixtures VI. Room planning for living areas A. Living room B. Accessibility for the handicapped C. Furniture size and arrangement D. Dining room E. Entryway and foyer F. Minimum clearance G. Family/Recreation room H. Special purpose rooms I. Patios, porches, and courts VII. Room planning for service areas A. The straight line kitchen B. The L-shaped kitchen C. Accessibility for the handicapped D. The corridor kitchen E. The peninsula kitchen F. Cabinets and appliances G. Garage or carport H. Driveway and turnaround VIII. Plot plans A. Property lines B. Contour lines C. Topographical features D. Common symbols E. Site location of residence IX. Footings, foundations, and concrete A. Footing shapes and specifications B. Foundations walls EN 103 Residential Design and CAD I 3
4 C. T-foundations D. Slab foundations E. Pier and post foundations F. Concrete and masonry basement walls G. Beams and girders H. Live and dead loads X. Foundation Plan A. Required information B. Material symbols C. Foundations plan drawing D. Basement plan drawing XI. Sill and floor construction A. Platform framing B. Balloon framing C. Joists and beams D. Floor trusses E. Subfloor F. Cantilevered joists XII. Wall and ceiling construction A. Frame wall construction B. Span data C. Ceiling construction D. Framing construction E. Brick names and sizes XIII. Doors and windows A. Interior doors B. Accessibility for the handicapped C. Exterior doors D. Garage doors E. Specifying doors F. Door details G. Door schedules H. Windows I. Window types J. Special window applications K. Window schedules XIV. Stairs A. Types of stairs B. Stair terminology C. Stair design D. Code requirements EN 103 Residential Design and CAD I 4
5 E. Stair calculations F. Structural details G. Accessibility for the handicapped XV. Fireplace and chimneys A. Fireplace design considerations B. Hearth and chamber C. Flue D. Framing around the fireplace and chimney E. Fireplace specifications F. Single-face fireplace G. Two-face fireplace H. Prefabricated metal fireplaces and stoves XVI. Roof designs A. Gable roof B. Hip roof C. Flat roof D. Shed roof E. Mansard roof F. Gambrel roof G. A-frame roof H. Other contemporary roof designs I. Roof trusses J. Ventilation K. Flashing L. Gutters and downspouts M. Roof sheathing and roofing XVII. Elevations A. Elevation Identification B. Grade, line, floors, and ceiling C. Walls, windows, and doors D. Roof features E. Dimensions, notes, and symbols F. Vertical height determination Learning Activities Learning activities will be assigned to assist the student to achieve the intended learning outcome(s) through lecture, instructor-led class discussion, guest speakers, group activities, drills/skill practice, and other activities at the discretion of the instructor. These activities may either be face-to-face or online. Grade Determination The student will be graded on learning activities and assessment tasks. Grade determinants may include the following: daily work, quizzes, chapter or unit tests, EN 103 Residential Design and CAD I 5
6 comprehensive examinations, projects, presentations, class participation, and other methods of evaluation at the discretion of the instructor. EN 103 Residential Design and CAD I 6
Design Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural
Design Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural and related construction. This course includes instruction
ARCHITECTURAL DESIGN II (544)
DESCRIPTION The second in a series, Architectural Design II prepares students with knowledge of residential architectural and related construction. Topics include; building materials, building codes, typical
COURSE OF STUDY UNIT PLANNING GUIDE ARCHITECTURE G RADE LEVEL: CREDITS CURT BANICKI 1 F ULL YEAR MICHAEL WEBER, ASST. PRINCIPAL JULY 2018
COURSE OF STUDY UNIT PLANNING GUIDE FOR: ARCHITECTURE G RADE LEVEL: 11 12 5 CREDITS CURT BANICKI 1 F ULL YEAR PREPARED BY: MICHAEL WEBER, ASST. PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR JULY 2018 DUMONT
Kankakee Community College
Kankakee Community College Course prefix and number: DRFT 2414 Course title: Architectural Drafting with Revit Credit hours: 4 Lecture hours: 2 Lab hours: 4 Semester: Spring 2013 Catalog description: Prerequisite:
Required Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
Kankakee Community College
Kankakee Community College Course Prefix and Number: DRFT 2414 Course title: Architectural Drafting with Revit Credit hours: 4 Lecture hours: 2 Lab hours: 4 Semester: Spring 2015 Catalog Description: Prerequisite:
Midterm Exam_STUDY GUIDE_70 questions
Class: Date: CADD 2 Midterm Exam_STUDY GUIDE_70 questions Multiple Choice Identify the choice that best completes the statement or answers the question. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1. Producing computer
Residential Design Using AutoCAD 2018
Daniel John Stine CSI, CDT Residential Design Using AutoCAD 2018 Includes video instruction SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE
COURSE TITLE: Architectural Drafting LENGTH: Full Year Grades DEPARTMENT: Technology Education Barbara O Donnell, Supervisor SCHOOL:
COURSE TITLE: Architectural Drafting LENGTH: Full Year Grades 11-12 DEPARTMENT: Technology Education Barbara O Donnell, Supervisor SCHOOL: Rutherford High School DATE: Spring 2005 Architectural Drafting
BTR 100. Blueprint Reading
BTR 100 Blueprint Reading Approved: December 3, 2010 EFFECTIVE DATE: Fall 2011 COURSE PACKAGE FORM Team Leader and Members Ken Kramer, Frank Port, Curtis Clough, Andra Goldberg Date of proposal to Curriculum
1. Name the horizontal member that rests on the foundation wall to support other wood members.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC62 - Drafting - Architr II Test 1 Description: Unit C - Floorplans - Test 3 (ALL) Form: 501 1. Name the horizontal member that rests
ARCHITECTURE CADD Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing
STRUCTURAL WOOD DETAILING IN CAD FORMAT
STRUCTURAL WOOD DETAILING IN CAD FORMAT STRUCTURAL WOOD DETAILING IN CAD FORMAT K.A. ZAVAT lnm51springer Science+Business ~---Media, LLC Copyright 1993 by Springer Science+Business Media New York Originally
Single-Family Dwelling Submittal Requirements
Single-Family Dwelling Submittal Requirements The purpose of this guideline is to assist our customers in preparing for plan submittal. The items listed must be included before your plans can be accepted
Contents OVERVIEW INTRODUCTION TO CHIEF ARCHITECT GETTING READY TO DRAW QUICK START VACATION CABIN: FLOOR PLAN. How this Book is Put Together
Contents OVERVIEW How this Book is Put Together Conventions Icon Key Files on the Website INTRODUCTION TO CHIEF ARCHITECT The Chief Architect Interface Working with the Toolbars Chief Architect s Views
ARCHITECTURAL DESIGN (542)
DESCRIPTION This is the first assessment in a sequence, Architectural Design I prepares students with knowledge of residential architectural and related construction. Topics include; architectural blueprint
Questions. Paul Ross Wallach V7198. Published by Hearlihy P.O. Box 1747 Pittsburg, KS
Questions for Blueprint-Reading Exams Paul Ross Wallach Published by Hearlihy P.O. Box 1747 Pittsburg, KS 66762 866-622-1003 www.hearlihy.com 81861 V7198 Copyright 2007 by Hearlihy. Except for making transparencies
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,
Strands & Standards CARPENTRY 2
Strands & Standards CARPENTRY 2 COURSE DESCRIPTION This is the second in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden structures and fixtures
COURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
TO WHOM IT MAY CONCERN:
TO WHOM IT MAY CONCERN: A lot of questions are asked throughout the year as to when a building permit is required. This list may help identify some of the instances when a permit would be required: Permit
Carpentry/Carpenter CIP Task Grid
1 Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify
DOCUMENT SUBMITTAL REQUIREMENTS FOR AN ALTERATION OR ADDITION TO AN EXISTING SINGLE-FAMILY DWELLING OR MULTI-FAMILY DWELLING
INFORMATION BULLETIN / PUBLIC - GENERAL INFORMATION REFERENCE NO.: Effective: 10-01-99 DOCUMENT NO. P/GI 2002-008 Revised: 11-01-02 Previously Issued As: IB ST-4 DOCUMENT SUBMITTAL REQUIREMENTS FOR AN
COURSE OUTLINE. Course Number Course Title Credits. Co- or Pre-requisite BCT110 Construction Materials & Methods
COURSE OUTLINE Course Number Course Title Credits BCT101 Construction Graphics 3 Hours: 2 Lecture 2 Studio/Lab, Co- or Pre-requisite BCT110 Construction Materials & Methods Implementation sem/year Fall
DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW SINGLE-FAMILY DWELLING
INFORMATION BULLETIN / GENERAL INFORMATION REFERENCE NO.: DOCUMENT NO.: P/GI 2014-009 Previously Issued As: P/GI 2011-009 Effective: 01-01-2014 Revised : DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW SINGLE-FAMILY
WINTER 15 EXAMINATIONS Subject Code: Model Answer- Building Drawing Page No- 01 /15
Subject Code: 17309 Model Answer- Building Drawing Page No- 01 /15 Important Instruction to Examiners:- 1) The answers should be examined by key words & not as word to word as given in the model answers
Printreading for Residential Construction
Printreading for Residential Construction Chapter 1 1. What are the five types of working drawings? Plot plans, floor plans, elevations, sections, and details 2. What information is typically available
BERKELEY COUNTY ENGINEERING AND
BERKELEY COUNTY ENGINEERING AND BUILDING INSPECTIONS 400 West Stephen Street - Suite 202, Martinsburg, WV 25401-3838 Telephone: 304-264-1966, Fax: 304-262-3128 Web Page: www.berkeleywv.org I. WHAT ARE
LESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS
LESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS INTRODUCTION In this lesson, you ll learn about the different types of drawings used in the construction industry, and how to read floor plans, section drawings,
DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY DWELLING
INFORMATION BULLETIN / GENERAL INFORMATION REFERENCE NO.: None DOCUMENT NO. P/GI 2014-007 Previously Issued As: P/GI 2011-007 Effective: 01-01-2014 Revised: DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY
What Plans Do I Need for a Building Permit?
What Plans Do I Need for a Building Permit? 6 CITY OF PORTLAND, OREGON - BUREAU OF DEVELOPMENT SERVICES 1900 SW 4th Avenue, Por tland, Oregon 97201 503-823-7300 www.portlandoregon.gov/bds This brochure
Architectural Design Process
Architectural Design Process Custom Residential A. Schematic Design Phase Pre-Design Meeting Site Analysis Site Survey Conceptual Design & Project Scope Design Program Guideline Project Team Formation
Framing Tech 1
Western Technical College 31410366 Framing Tech 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 108.00 This course introduces the
Dimension Below are the critical settings in AutoCAD. Other software should follow the same settings.
8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115) Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 0.0 Revised: Fall 08 Catalog
Core Curriculum Carpentry 1 Carpentry 2 Carpentry 3
A Correlation of Core Curriculum Carpentry 1 Carpentry 3 To the Carpentry II Course Standards and Objectives to the Content Standards Resource Title: Core Curriculum: Introductory Craft Skills, Fifth Edition
TEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I
Parsippany-Troy Hills School District TEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I Developed: June 2004 Revised: October 2012 June 2016 Approved
DOCUMENTATION 2B DELIVERY SCHEDULE & ASSESSMENT PLAN (DSAP)
DELIVERY SCHEDULE & ASSESSMENT PLAN (DSAP) Unit/Module Code & Title Course Code & Title Learning Portfolio Pre-requisite Unit(s) BDCAD402A Produce technical drawings to architectural conventions using
Drawing Standards & Conventions for IDD
Drawing Standards & Conventions for IDD This document consists of a set of standards that have been developed to maintain a consistency in Interior Decoration and Design students work. The standards are
GUIDELINES FOR MEASURING BUILDING HEIGHT
GUIDELINES FOR MEASURING BUILDING HEIGHT THE CITY S POLICIES ON BUILDING HEIGHT In 1994, the City adopted a new General Plan that sets direction for development within Brisbane. Among its policies affecting
Material Description Qty Units Cost Total SQUARE FOOTAGE TOTAL Area 1692 sqft
Material Report for plan: Willowdale A Page 1 of 7 SQUARE FOOTAGE TOTAL Area 1692 sqft EXCAVATION & FOUNDATION EXCAVATION & BACKFILL Conc. Footing (volume) 5 m³ 122.50 612.50 Conc. Footing (length) 6"x20"
Carpentry Level 1, 2014
A Correlation of Carpentry Level 1, Utah Core Curriculum for Resource Title: Carpentry Publisher: Pearson Education publishing as Prentice Hall ISBN: SE: 9780133403800 Media (text, software, internet,
Get out your notes and turn to Understand, Identify, and Label Floor Plans. If you don t have notes yet you can pick up copies on the back counter.
Get out your notes and turn to Understand, Identify, and Label Floor Plans If you don t have notes yet you can pick up copies on the back counter. It costs no more to build a house with a good plan, than
Wall and Ceiling Framing
Student Edition Developed by the Curriculum and Instructional Materials Center for the Trade and Industrial Education Division Oklahoma Department of Career and Technology Education 00-00000 TI3674 Copyright
G. SAMPLE DRAWINGS AND ILLUSTRATIONS INDEX
G. SAMPLE DRAWINGS AND ILLUSTRATIONS INDEX Does not constitute pre-approval, provides samples of authorized styles and designs 1. ARBORS, PERGOLAS, TRELLISES... PAGE 42 2. FENCES A. SPLIT-RAIL... PAGE
Residential Room Addition / Remodel Submittal Requirement Checklist
City of Elko Building Department 1753 College Avenue Elko, Nevada 89801 (775) 777-7220 fax (775) 777-7229 Residential Room Addition / Remodel Submittal Requirement Checklist TWO COMPLETE SETS OF PROPERLY
THE. Harbor Master ELEVATION 2
THE Harbor Master ELEVATION 2 Additional Elevations ELEVATION 1 ELEVATION 3 Lower Level Patio 28'10" x 12'0" Mechanicals on Raised Platform H Lower Entry HVAC Parking 20'4" x 48'0" Side Entry Garage Side
TYPICAL PATIO COVERS. OWNER: ADDRESS: PHONE:
City of Aliso Viejo Building Division 12 Journey, Suite 100 Aliso Viejo, CA 92656 (949)425-2540 Fax (949)425-3899 www.cityofalisoviejo.com TYPICAL PATIO COVERS 111 I. GENERAL Patio covers are one-story,
Meridian THE. a Well-Planned Ranch Home. Open Cafe to Great Room Optional Interior Fireplace
THE Meridian a Well-Planned Ranch Home Open Cafe to Great Room Interior Fireplace Dining Room to Den Option Dramatic 9 Foot Standard Ceilings MERIDIAN FIRST FLOOR PLAN (Based on Elevation A) 1 Story 3
BUILDING PLANS. BUILDING DEPARTMENT
BUILDING PLANS BUILDING DEPARTMENT 952-446-1660 www.cityofminnetrista.com This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances,
Technology Education Department
Department Technology Education The technology education curriculum is designed to provide a balanced mix of theoretical and practical knowledge with an abundant amount of hands-on activities included
4. Facial expressions or body movements used to emphasize an idea are called:
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC62 - Drafting - Architr II Test 1 Description: Entire Course (270q) Form: 501 1. How many minutes should a person arrive before an
National Association of Women in Construction Education Foundation CADIDESIGNIDRAFTING COMPETITION HIGH SCHOOL STUDENTS
National Association of Women in Construction Education Foundation CADIDESIGNIDRAFTING COMPETITION HIGH SCHOOL STUDENTS DESIGN PROBLEM AND PROJECT DESCRIPTION I. PROJECT DESCRIPTION The design problem
Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.
Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will
MOREHEAD STATE UNIVERSITY
MOREHEAD STATE UNIVERSITY College of Science and Technology Department of Applied Engineering Technology ITCD 405 Civil Drafting...3 credits Semester: Spring 2011 LCB 215 INSTRUCTOR: Dr. Sanjeev Adhikari
PLAN SUBMITTAL REQUIREMENTS
DEPARTMENT OF ECONOMIC AND COMMUNITY DEVELOPMENT BUILDING DIVISION PLAN SUBMITTAL REQUIREMENTS Residential and Commercial Projects Welcome to the South San Francisco Building Division. We are providing
NEW SINGLE FAMILY HOMES
NEW SINGLE FAMILY HOMES Your submission must include the following to be accepted as a complete application: 1 copy of the deed and / or purchase and sales agreement if you have owned the property less
COTTAGES AT OVERBROOK THE 'WOODSIDE' 541 LOWNDES HILL ROAD GREENVILLE, SC
GREENVILLE, SC TYPE: MUNICIPAL ADDRESS: CUSTOM RESIDENTIAL XXX STREET GREENVILLE SC, 9607 A E J P T : OWNER:, LLC TAX MAP #: PROPERTY AREA: ZONING DISTRICT: BUILDING MATERIAL: BUILDING HEIGHT: FOUNDATION
Scheme - G Sample Test Paper - I. Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV
Scheme - G Sample Test Paper - I Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV 17309 Semester : Third Subject Title : Building Drawing Marks : 25 Time: 1.30 hour Instructions: 1. All
Academic Standards Use the Nevada Career Information System (CIS) or a similar computerbased
Performance Standard 1.0 The student will be able to describe the career opportunities, qualifications, and responsibilities related to architectural technology and related fields. The student will be
Entry Level Assessment Blueprint Architectural Drafting
Entry Level Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Preparing to Draw Identify drafting tools, materials, and
Deck Tutorial. Chapter 8: Decks and Porches
Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to
ENGINEERING GRAPHICS AND DESIGN
GUIDELINES FOR THE PRACTICAL ASSESSMENT TASK GRADE 12 2016 ENGINEERING GRAPHICS AND DESIGN EXTERNALLY MODERATED AND APPROVED BY UMALUSI THIS GUIDELINE CONSISTS OF 14 PAGES 1. INTRODUCTION: A. The Structure
Carpentry. EXAM INFORMATION Items. Points. Prerequisites. Course Length. Career Cluster EXAM BLUEPRINT. 1- Materials, Fasteners & Adhesives 10%
EXAM INFORMATION Items 73 Points 73 Prerequisites NONE Course Length DESCRIPTION This is the first in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden
Gateway Corridor Standards
Gateway Corridor Standards Building design and construction: Bungalow Classical Revival Colonial Revival Frame Vernacular Gothic Revival Italianate Mediterranean Revival Queen Anne Shingle architectural
Deck Tutorial. Chapter 6: Decks and Porches
Chapter 6: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to
BUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT
BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota
Prerequisites: ARCH 1230: Building Technology II with a grade of C or higher or ARCH 1240 and ARCH1200 with a grade of C or higher.
New York City College of Technology City University of New York 300 Jay Street, Brooklyn, New York 11201 Department of Architectural Technology ARCH 2330 BUILDING TECHNOLOGY III 1 cl hrs, 6 lab hrs, 4
Wisconsin Technical College System. Curriculum Standards & Program Design Summary CARPENTRY APPRENTICE (ABC)
Program Information Program Curriculum Standards & Program Design Summary 50-410-9 CARPENTRY APPRENTICE (ABC) Carpenters make up the largest building trades occupation in the industry and those with all-around
CITY OF LOVELAND HOMEOWNERS GUIDE FOR BUILDING PERMITS FOR HOME IMPROVEMENTS
CITY OF LOVELAND HOMEOWNERS GUIDE FOR BUILDING PERMITS FOR HOME IMPROVEMENTS Development Services Department Building Division 500 East Third Street, Suite 110 Loveland, CO 80537 (970) 962-2505 FAX (970)
Michigan THE. Colonial Series ELEVATION 4
THE Michigan ELEVATION 4 Colonial Series Additional Elevations ELEVATION 1 ELEVATION 2 ELEVATION 3 ELEVATION 4 f. ce met First Floor Wall Oven Gourmet Gourmet Pantry Pan Morning Sliding Glass Pantry Pantry
Department of Architectural Technology Spring 2019
Department of Architectural Technology Spring 2019 ARCH 1231 BUILDING TECHNOLOGY I 1 lecture hour and 4 lab/studio hours, 3 credits Course Description: An introduction to basic materials of construction
Lesson Plan. Specific Objectives: Using the criteria for the various areas of their home found in previous lessons, the students will be able to:
Course Title: Architectural Design Session Title: The Floor Plan Lesson Plan Performance Objective: After completing this lesson, the students will be able to design and draw a plan that will show the
Monarch THE. Estate Series ELEVATION 3
THE Monarch ELEVATION 3 Estate Series Additional Elevations ELEVATION 1 ELEVATION 2 ELEVATION 3 ELEVATION 4 Morning 14'0" x 13'9" Gas Famy First Floor Kitchen 22'0" x 16'7" But-In Sliding Glass oor Gas
Architectural Drafting
Measuring What Matters in Job Ready Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Copyright 2012 General Assessment Information Blueprint Contents General Assessment Information
FEMA Elevation Certificate
Visual 320.1 Visual EC-1 Required to rate post-firm and some pre-firm buildings Determine compliance with floodplain management ordinance Support LOMA/LOMR-F Prerequisite for the CRS Visual 320.2 Visual
2x6. 2x8. 2x10. Size. 2-2x10 8'-5" w/ 2 NJ 7'-3" w/ 2 NJ
1 Rafter Size Spacing Allowable span 24" 11'-9" 24" 2x6 14'-1" 2x4 12" 15'-6" 12" 24" 14'-10" 24" 2x8 18'-2" 2x6 12" 20'-5" 12" 24" 18'-2" 24" 2x10 22'-3" 2x8 12" 25'-8" 12" 24" 21'-0" 24" 2x12 25'-9"
THE PLAT MAP 228 SITE AND GRADING PLAN. The Function of a Plat Map. Drawing a Plat Map
228 SITE AND GRADING PLAN THE PLAT MAP The Function of a Plat Map The site plan is developed through stages, each dealing with new technical information and design solutions. The first step in site plan
3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)?
Mobile County Public Works Residential Plan Reviewers Checklist For Structural Requirements of Wood Framed Residences Recommendation: Permit as Noted Revise Plans and Resubmit MCPW Ref. No. Design Criteria:
Augusta. CRAFTSMAN 2,067 SQ. FT. (Elevation Shown with Optional Metal Roof Sections) 2 BEDS 2 BATHS 2 CAR GARAGE
Augusta 2 BEDS 2 BATHS 2 CAR GARAGE CRAFTSMAN 2,067 SQ. FT. (Elevation Shown with Optional Metal Roof Sections) to show specific detailing. As-Built Condition will control. Price(s) shown may not reflect
Making Posters That Help You Draw Accurate Floor Plans.
Making Posters That Help You Draw Accurate Floor Plans. Kitchen Styles Straight Line: L-Shape: Corridor: Switches: Single Pole: 3- way: 4- way: Weather Proof: Dimmer: U-Shape: Island: Special: Branch:
OBX Beach Builders L.L.C.
WRITTEN APPROVAL OF NO DERIVATIVE WORKS OF THIS PLAN MAY BE MADE WITHOUT PRIOR WRITTEN PERMISSION. THE PURCHASE OF THIS HOME PLAN ENTITLES THE PURCHASER TO USE THIS SET OF BEDROOM # BEDROOM #3 GREAT ROOM
KITCHEN & LIGHTING DESIGN TENTATIVE SCHEDULE FALL 2009 DATE TOPIC READING ASSIGNMENT COURSE INTRODUCTION INTERIORS, CHAPTER 5
TUESDAY & THURSDAY: Bring 6 different Color Pencils KITCHEN & LIGHTING DESIGN TENTATIVE SCHEDULE FALL 2009 DATE TOPIC READING ASSIGNMENT 8-25-09 COURSE INTRODUCTION INTERIORS, CHAPTER 5 1) LIGHTING TECHNIQUES
www.cad-designers.com Staffing Services Cad Designers is an established staffing company that specializes in providing professional support for the A/E/C industry. All candidates are screened with a complete
SECTION: 15 ZONING RULE LOT AREA 6134 S.F S.F. BUILDING AREA (FOOTPRINT) LOT COVERAGE 20.2% 24.86' FRONT YARD SIDE YARD 8.
PROPOSED 1ST FLOOR PROPOSED 2ND FLOOR Anthony Hatziioannou Architect, P.C. EXISTING 1ST FLOOR ZONING CALCULATION JURISDICTION: TOWN OF OYSTER BAY SECTION: 15 BLOCK: 71 LOT: ZONE: RESIDENCE R1-7 PERMITTED
Deck Tutorial. Decks and Porches. Drawing Decks
Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.
PLANNING DEPARTMENT SUBMITTAL REQUIREMENTS FOR CONDITIONAL USE PERMITS CLASS 4 DEVELOPMENT REVIEW PROCESS. A. Written Material
PLANNING DEPARTMENT 970.668.4200 0037 Peak One Dr. PO Box 5660 www.summitcountyco.gov Frisco, CO 80443 SUBMITTAL REQUIREMENTS FOR CONDITIONAL USE PERMITS CLASS 4 DEVELOPMENT REVIEW PROCESS Per the provisions
Unit 9. Wall and Ceiling Framing
Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings
Rembrandt THE. Colonial Series ELEVATION 5
THE Rembrandt ELEVATION 5 Colonial Series Additional Elevations ELEVATION 13 ELEVATION 33 ELEVATION 5 ELEVATION 4 First Floor Std. Vaulted Ceiling Std. Std. Vaulted Vaulted Ceiling Ceiling Morning Room
Garage Design Guide. October 2018
Garage Design Guide October 2018 The Corporation of the Township of Hamilton 8235 Majestic Hills Drive, P.O. Box 1060, Cobourg Ontario K9A 4W5 Tel: 905-342-2810 Fax: 905-342-2818 Email: Tim Jeronimus (Chief
SCALE 1/4" = 1'-0" SCALE 1/4" = 1'-0" SCALE 1/4" = 1'-0"
0 1' 2' ' 4' 5' ' 7' 8' ' 10' GRAPHIC BRICK ELEVATIONS 1525 1 OF 5 0 1' 2' ' 4' 5' ' 7' 8' ' 10' GRAPHIC " OVERHANG " OVERHANG " OVERHANG ELEVATIONS 1525 2 OF 5 0 1' 2' ' 4' 5' ' 7' 8' ' 10' GRAPHIC 58'-
Grade Level Benchmarks and Components
Grade Level Benchmarks (GLB) describe the concepts and skills we want students to know and be able to demonstrate in each grade level and each course. Teachers will assess student academic performance
Deck Tutorial. Chapter 8: Decks and Porches
Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase.
2D Drawings Levels of Detail Specification
2D Drawings Levels of Detail Specification March 2018 2D Measured Building Survey Level of detail Level of detail should be chosen based on the intention that the final drawings will be used for. It should
Prerequisites: ARCH 1230 (1231): Building Technology II with a grade of C or higher or ARCH 1240 and ARCH1200 with a grade of C or higher.
New York City College of Technology City University of New York 300 Jay Street, Brooklyn, New York 11201 Department of Architectural Technology ARCH 2330 (2431) BUILDING TECHNOLOGY III 1 cl hrs, 6 lab
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305 Class Hours: 3 Credit Hours: 4 Laboratory Hours: 3 Date Revised: Spring 2011 NOTE: This course is designed
PROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS. room) Scalable bubble diagrams schedules describing programmatic
GENERAL SITE PROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS Scope of work narrative Building code review Description of construction Documentation on drawings as List of applicable
FASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
Oxford THE. Colonial Series ELEVATION 5
THE Oxford ELEVATION 5 Colonial Series Additional Elevations ELEVATION 5 ELEVATION 4 ELEVATION 32 ELEVATION 3 Other: XX Owner Property: Multi File Title: 520-47_Oxford_First.eps Rev 2:RW 12/30/11 Proof
Katrina Cottage Clay Street Cottage
The Clay Street Cottage, designed by Bill Allison consists of 918 sq. feet. This cottage may be turned with either end facing the street depending on whether the smaller bedroom is used as a den or a bedroom.