Submittal Transmittal

Transcription

1 Commonwealth Engineers, Inc Company Drive Indianapolis IN United States Submittal Transmittal PROJECT: SUBJECT: Waynetown - Water-Strmwtr Imprv-Div A J13046-A DS A_Engine Generators & Transfer Switches Addt'l Info DATE SENT: 11/15/2016 SUBMITTAL ID: TYPE: Submittal TRANSMITTAL ID: PURPOSE: No exceptions noted VIA: Info Exchange SPEC SECTION: FROM TO NAME COMPANY PHONE Jennifer Harshbarger Commonwealth Engineers, Inc. jharshbarger@contactce i.com NAME COMPANY PHONE Lynette McNees Thieneman Construction lynette.mcnees@thiene manconstruction.com (317) REMARKS: Response (No Exceptions Noted) from: Toby Church (Commonwealth Engineers, Inc.) Remarks: Response (No Exceptions Noted) from: Sherri Bell (Commonwealth Engineers, Inc.) Remarks: CONTENTS QUANTITY: 1 DATED: 11/13/2016 NUMBER: DESCRIPTION: DS A_Engine Generators and Transfer Switches Addt'l Information.pdf ACTION: REMARKS: COPIES: Rachel Katchmar Robert Bellucci (Commonwealth Engineers, Inc.) (Commonwealth Engineers, Inc.) Page 1 of 2

2 Submittal Transmittal DATE: 11/15/2016 ID: Sherri Bell Paul Rusk (Commonwealth Engineers, Inc.) (Town of Waynetown) Page 2 of 2

3 Waynetown Water System Improvements Division A -New Water Treatment Plant Town of Waynetown, IN Submittal Review Sheet Attached is the submittal for the Engine Generators and Transfer Switches Additional Info for the Waynetown Water Systems Improvements Project for your review and approval. Thieneman Construction has reviewed the submittal information and added the following notes for your review, approval, and consideration: Items for Commonwealth Engineers: 1. Please see the revised ATS drawings and circuit breaker cut sheet. Items for Supplier: 1. Supply materials as requested by TCI. If you have any questions on this submittal information, please contact Travis Smith at (317) Thieneman Construction requests your review, approval, and return of one (1) copy of the approved submittals. Project Name: Contractor: Subcontractor / Supplier: Submittal Number: Submittal Specification Section: Item Description: Quantity of Submittals: Comments: Quantity of Approved Submittals to be Returned: Signature: Waynetown Water Systems Improvements Thieneman Construction, Inc. W.W. Williams D A Engine Generators Transfer Switches Engine Generators and Transfer Switches 1 Electronic See Above 1 Electronic Travis Smith CONTRACTOR S CERTIFICATION Submittal material has been reviewed for compliance with specifications and drawings. Required field measurements have been verified. The work shown on this submittal has been coordinated with other submittals affected by this work. All data has been checked by the Contractor and any variations from the specifications or drawings have been noted. The work described on the submittal material is recommended by the Contractor, and the guarantee in the specifications will apply: Contractor: Thieneman Construction Approved: Travis Smith Date: 11/11/16

4 Commonwealth Engineers, Inc Company Drive Indianapolis IN United States Submittal Transmittal PROJECT: SUBJECT: Waynetown - Water-Strmwtr Imprv-Div A J13046-A DS-23-01_Engine Generators and Transfer Switches DATE SENT: 10/24/2016 SUBMITTAL ID: 63 TYPE: Submittal TRANSMITTAL ID: PURPOSE: Exception Noted, Revise and Resubmit VIA: Info Exchange SPEC SECTION: FROM NAME COMPANY PHONE Jennifer Harshbarger Commonwealth Engineers, Inc. jharshbarger@contactce i.com (317) TO NAME COMPANY PHONE Lynette McNees Thieneman Construction lynette.mcnees@thiene manconstruction.com REMARKS: Response (Exception noted, Revise and Resubmit) from: Chris Means (Commonwealth Engineers, Inc.) Remarks: Revise and Resubmit: An entire resubmittal is not required. Provide documentation on revised circuit breakers for the generator and ATS. The generator breaker and ATS breaker trip settings will be provided per electrical drawing E1.0. Response (Exceptions Noted, Furnish as Corrected) from: Sherri Bell (Commonwealth Engineers, Inc.) Remarks: Per DS-26: Fuel tank level indicator per 2.04(B)(6) Vandal resistant fill cap per 2.04(B)(7) Audible/Visual leak detection per 2.04(B)(2) Confirm true secondary containment per 2.04(B)(1) Padlock provisions on hinged doors per 2.08(A)(1)(c) Louvers w/ bird screens per 2.08(A)(1)(b) Ammeter & voltmeter flush on doors per 2.03(K)(8)(9) Page 1 of 2

5 Submittal Transmittal DATE: 10/24/2016 ID: CONTENTS QUANTITY: 1 DATED: 10/10/2016 NUMBER: DESCRIPTION: DS-23-01_Engine Generators and Transfer Switches.pdf ACTION: REMARKS: COPIES: Al Stong Paul Rusk Rachel Katchmar Robert Bellucci Sherri Bell (Commonwealth Engineers, Inc.) (Town of Waynetown) (Commonwealth Engineers, Inc.) (Commonwealth Engineers, Inc.) (Commonwealth Engineers, Inc.) Page 2 of 2

6 Waynetown Water System Improvements Division A -New Water Treatment Plant Town of Waynetown, IN Submittal Review Sheet Attached is the submittal for the Engine Generators and Transfer Switches for the Waynetown Water Systems Improvements Project for your review and approval. Thieneman Construction has reviewed the submittal information and added the following notes for your review, approval, and consideration: Items for Commonwealth Engineers: 1. MTU Onsite Energy W.W. Williams 2. ASCO Transfer Switches Items for Supplier: 1. Supply materials as requested by TCI. NOTES: An entire resubmittal is not required. Provide documentation on revised circuit breakers for the generator and ATS. The generator breaker and ATS breaker trip settings will be provided per Electrical Drawing E1.0. If you have any questions on this submittal information, please contact Travis Smith at (317) Thieneman Construction requests your review, approval, and return of one (1) copy of the approved submittals. Project Name: Waynetown Water Systems Improvements Contractor: Thieneman Construction, Inc. Subcontractor / Supplier: W.W. Williams Submittal Number: DS Submittal Specification Section: / Item Description: Engine Generators and Transfer Switches Quantity of Submittals: 1 Electronic Comments: See Above Quantity of Approved Submittals to be Returned: 1 Electronic Signature: Travis Smith CONTRACTOR S CERTIFICATION Submittal material has been reviewed for compliance with specifications and drawings. Required field measurements have been verified. The work shown on this submittal has been coordinated with other submittals affected by this work. All data has been checked by the Contractor and any variations from the specifications or drawings have been noted. The work described on the submittal material is recommended by the Contractor, and the guarantee in the specifications will apply: Contractor: Thieneman Construction Approved: Travis Smith Date: 10/10/16

7 Product data sheet Characteristics JDL36250CU33X MOLDED CASE CIRCUIT BREAKER 600V 250A Product availability: Non-Stock - Not normally stocked in distribution facility Ordering and shipping details Category Discount Schedule Nbr. of units in pkg. 1 Jun 11, 2015 Main Commercial Status Product or component type Range of product [In] rated current Poles description Breaking capacity [Ue] rated operational voltage [Ics] rated service short-circuit breaking capacity Trip unit technology Product certifications Mounting mode Breaking capacity code Electrical connection AWG gauge Commercialised Molded Case Circuit Breaker PowerPact J 250 A 3P 14 ka 600 V AC 18 ka 480 V AC 25 ka 240 V AC 600 V AC 100 % Electronic standard Micrologic 3.2 S LSI CCC CSA IEC UL listed Unit mount D Lugs line Lugs load 3/ AWG/kcmil aluminium/copper H/J ELEC TRIP UNIT MOUNT BREAKER/SW DE2 Package weight(lbs) 5.00 Product availability Returnability Country of origin Non-Stock - Not normally stocked in distribution facility Y US 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *Prices are indicative

8

9 MICROLOGIC ELECTRONIC TRIP UNITS Micrologic 3.2/3.2S/5.2A or E/6.2A or E Instantaneous Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. In = Maximum dial setting of Ir. 250A J-Frame: In = 250A = Max Ir setting Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature Schneider Electric all rights reserved Drawing No. S1A March 2011

10 MICROLOGIC ELECTRONIC TRIP UNITS Micrologic 3.2S Long Time/ Short Time Trip Curve 250A J-Frame The time-current curve information is to be used for application and coordination purposes only. Notes: 1. There is a thermal-imaging effect that can act to shorten the long-time delay. The thermal imaging effect comes into play if a current above the long-time delay pickup value exists for a time and then is cleared by the tripping of a downstream device or the circuit breaker itself. A subsequent overload will cause the circuit breaker to trip in a shorter time than normal. The amount of time delay reduction is inverse to the amount of time that has elapsed since the previous overload. Approximately 20 minutes is required between overloads to completely reset thermal-imaging. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. Curves apply from -35ºC to +70ºC (-31ºF to +158ºF) ambient temperature Schneider Electric all rights reserved Drawing No. S1A March 2011

11 Submittal Data for: WAYNETOWN WWTP ASCO CAT #J7AUSA3250N5XC Series 7000 Automatic Transfer Switch System is Service Entrance Rated at 277/480, 60 Hz, 3 phase, 4 wire and will consist of the following: Automatic Transfer Switch Cubicle containing the following: Service Entrance Circuit Breaker Square-D, Type LHL, 400AF/250AT, 80% Rated, Molded Case Circuit Breaker, Thermal Magnetic Trip. ASCO 7000 Series Automatic Transfer Switch, 3 phase, 3 pole, 4 wire (solid neutral), 250A Rated, 277/480VAC, Group 5 Microprocessor Control Panel, With the Following Optional Accessories: Acc. 18B/G Acc. 31Z Acc. 34A/B Acc. 72EE2 Acc. 125A Source Availability Contact Pre-Signal Circuitry Normal & Emergency Transfer Inhibit Digital Communications Interface Seismic Certification Cabling to connect the Circuit Breaker to the normal of the ATS Housed in a NEMA 1 Enclosure Unit has a 42kAIC Any Breaker withstand current 480V. Note: Outline and Wiring drawings are for submittal purposes only. Actual drawings will be provided 2 weeks ARO.

12 ASCO

13

14

15

16

17

18