INTERIOR INSTALLATION

Transcription

1 12 GA HANGER WIRE, TYP. PANEL 1 1 " " " SYSTEM DEPTH CEILING ACCESS SEE DETAIL A1. " MAX OVERHANG, TYP. 4'-0" MAX HANGER WIRE SPACING, TYP. SUSPENSION SEE DETAIL A GA HANGER WIRE,, NOT BY HUNTER DOUGLAS SEE DETAIL A1.2 SEE DETAIL A1.3 3 " " 3 4 " TYP. 4 3 " MODULE TYP. 3 4 " TYPICAL SYSTEM SECTION WALL TRIM SEE DETAIL A1.6 4" MIN, 6" MAX PANEL OVERHANG, TYP. SPACING, TYP. 2'-0" MAX FIXTURE RECOMMENDATIONS SEE DETAIL A1. & A1.9 NOTE: HUNTER DOUGLAS ARCHITECTURAL RECOMMENDS INSTALLING PANELS WITH RANDOM STAGGERED SEAMS. INTERIOR INSTALLATION PANEL SPLICE SEE DETAIL A1.4 PANEL SEE DETAIL A1.1 FLOATING TRIM TRIM NOT SHOWN FOR CLARITY SEE DETAIL A Oakbrook Parkway, Suite 100 T F not be submi tted f or MATERIAL: /" FIRE RATED MDF OVERALL ISOMETRIC VIEW PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.0 DATE: 1//1

2 " 3 " 3 4 " TYP. " " 3 4 " TYP. 4 3 " MODULE TYP. 3 4 " MODULE TYP. LINEAR END VIEW LINEAR PANEL END VIEW FACTORY TONGUE END FACTORY GROOVE END " '-0" PANEL SIDE VIEW PANEL CONFIGURATIONS PANEL FINISHES ALL PANELS UTILIZE 4 3 " MODULE LINEAR : 3 " WIDTH LINEAR PANEL: " WIDTH '-0" LENGTH ONLY LINEAR 4 AND PANELS CAN BE USED ON SAME -- PATTERN MUST BE PROVIDED PANEL MATERIAL " FIRE RATED MDF WITH WOOD VENEER: 9003 WHITE OAK (RIFT CUT) 900 DOUGLAS FIR (VERTICAL GRAIN) 9013 CHERRY (FLAT CUT) 9114 WALNUT (FLAT CUT) 9122 ANIGRE (QUARTER CUT) 9427 MAPLE (FLAT CUT) OTHER FINISHES AVAILABLE, CONTACT HUNTER DOUGLAS PERFORATIONS PANELS CANNOT BE PERFORATED FACTORY TONGUE END LINEAR LINEAR PANEL PANEL ISOMETRIC SCALE: NOT TO SCALE FACTORY GROOVE END 01 Oakbrook Parkway, Suite 100 T F not be submi tted f or MATERIAL: /" FIRE RATED MDF PANEL PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.1 DATE: 1//1

3 " MAX OVERHANG, TYP. 4'-0" MAX HANGER WIRE SPACING, TYP. 12 GA HANGER WIRE, TYP. " SYSTEM DEPTH " 4'-0" MAX HANGER WIRE SPACING, TYP. " MAX OVERHANG, TYP. " TYPICAL SECTION THROUGH PANELS 2'-0" MAX SPACING, TYP.* 4" MIN, 6" MAX PANEL OVERHANG, TYP. 4" MIN, 6" MAX PANEL OVERHANG, TYP. 2'-0" MAX SPACING, TYP.* TYPICAL SECTION THROUGH INTERIOR INSTALLATION NOTE: ATTACHMENT TO STRUCTURE DESIGNED AND PROVIDED, NOT BY HUNTER DOUGLAS. NOTE: ALIGNMENT & ORIENTATION CRITICAL FOR PANEL ACCESSIBILITY. S CONTAIN FIXED & DEMOUNTABLE S THAT MUST BE ALIGNED AT EACH ROW. *PANELS MUST BE SUPPORTED BY MIN TWO (2) S ** SHOWN, LINEAR PANEL SIMILAR 01 Oakbrook Parkway, Suite 100 T F of Hu nter Douglas. It MATERIAL: /" FIRE RATED MDF SUSPENSION PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.2 DATE: 1//1

4 4 3 " MODULE GALV. STEEL MATERIAL S CONTAIN FIXED AND DEMOUNTABLE S THAT ALTERNATE AT EVERY LOCATIONS (1'-9 7 ") DEMOUNTABLE S ARE DIRECTIONAL NOTE: ALIGNMENT & ORIENTATION CRITICAL FOR PANEL ACCESSIBILITY. S CONTAIN FIXED & DEMOUNTABLE S THAT MUST BE ALIGNED AT EACH ROW. SPLICE PIN, ONE (1) PER SPLICE LOCATION STAGGER SPLICE JOINTS AT EACH ROW, TYP. DEMOUNTABLE FIXED ENSURE 4-3/" MODULE IS RETAINED 1'-10" NOM. MAX OPENING SIZE TYP. FIXED DEMOUNTABLE FIXED SPLICE INSTALLATION SCALE: NOT TO SCALE ALIGNMENT FOR ACCESSIBILITY SCALE: NOT TO SCALE *VERTICAL SUPPORT OMITTED FOR CLARITY 01 Oakbrook Parkway, Suite 100 T F of Hu nter Douglas. It MATERIAL: /" FIRE RATED MDF PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.3 DATE: 1//1

5 MIN 3" REQUIRED ABOVE FOR CLAMPING TOOL OPERATION NOTE: HUNTER DOUGLAS ARCHITECTURAL RECOMMENDS INSTALLING PANELS WITH RANDOM STAGGERED SEAMS. TWO (2) PANEL SPLICE PINS PER SPLICE LOCATION FOR BOTH NATURA NEO LINEAR 4 & PANEL SIZES FACTORY GROOVE END FACTORY TONGUE END PANEL SPLICE INSTALLATION NOT TO SCALE DO NOT SPLICE DIRECTLY UNDER PANEL INSTALLATION NOT TO SCALE USE CLAMPING TOOL TO MOUNT NATURA NEO LINEAR PANEL ONTO TYPICAL SECTION AT PANEL SPLICE SCALE: FULL TONGUE AND GROOVE JOINT TWO (2) PANEL SPLICE PINS PER SPLICE LOCATION FOR BOTH NATURA NEO LINEAR 4 & PANEL SIZES *VERTICAL SUPPORT OMITTED FOR CLARITY ** SHOWN, LINEAR PANEL SIMILAR 01 Oakbrook Parkway, Suite 100 T F not be submi tted f or MATERIAL: /" FIRE RATED MDF PANEL INSTALLATION PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.4 DATE: 1//1

6 1 INSERT DEMOUNTING TOOL IN REVEAL BETWEEN NATURA NEO PANELS AND SQUEEZE TO DISENGAGE PANEL/DEMOUNTABLE PANEL CLIP. TO FIND LOCATIONS OF DEMOUNTABLE PANELS, TEST DEMOUNTING TOOL IN A FEW LOCATIONS. IF PANELS DO NOT DISENGAGE EASILY, MOVE ON TO THE NEXT ROW TO TEST. S ALTERNATE FIXED AND DEMOUNTABLE CLIPS AT EVERY LOCATIONS (1'-9 7 "). 2 NOTE DEMOUNTABLE S ONLY DISENGAGE IN ONE DIRECTION. 3 NATURA NEO PANEL CAN NOW BE LOWERED FROM. FOR REINSTALLATION, ALIGN DEMOUNTABLE AND SNAP BACK ONTO IN REVERSE DIRECTION FROM STEP 2. 1'-97 " FIXED TYPICAL SECTION AT CEILING ACCESS SCALE: 3" - 1'-0" 1'-9 7 " DEMOUNTABLE 1'-97 " FIXED FIXED DEMOUNTABLE 3 2 DEMOUNTING TOOL 1 DEMOUNTABLE S ARE DIRECTIONAL *VERTICAL SUPPORT OMITTED FOR CLARITY ** SHOWN, LINEAR PANEL SIMILAR 01 Oakbrook Parkway, Suite 100 T F of Hu nter Douglas. It MATERIAL: /" FIRE RATED MDF CEILING ACCESS PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1. DATE: 1//1

7 FIELD-MITER TRIMS AT CORNERS FIELD CUT NATURA NEO LINEAR END EXTRUDED 1" WALL ANGLE TRIM 12 GA HANGER WIRE, TYP. DETAIL 'B' FIELD CUT SIDE AS REQUIRED AND SECURE TO WITH MIN # X 1/2" FASTENER AT ALL PANEL/ INTERSECTIONS EXTRUDED 1" WALL ANGLE TRIM DETAIL 'A' 'A' 'B' FIELD CUT SIDE AS REQUIRED AND SECURE TO WITH MIN # X 1/2" FASTENER AT ALL PANEL/ INTERSECTIONS EXTRUDED WALL ANGLE TRIM 0.063" EXTRUDED ALUMINUM VENEER FINISH TO MATCH OR PAINTED CURVED APPLICATIONS AVAILABLE ONLY IN DECORATED WOOD (POWDER COATED) OR PAINTED FINISHES 12'-0" EXTRUDED WALL ANGLE TRIM PART LENGTH 1" 1" INTERIOR INSTALLATION * SHOWN, LINEAR PANEL SIMILAR 01 Oakbrook Parkway, Suite 100 T F not be submi tted f or MATERIAL: /" FIRE RATED MDF WALL TRIM PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.6 DATE: 1//1

8 EX-1 CLIP 4" MAX ALONG EDGELINE TRIM, TYP. USE 1-1/2" X 1-1/2" X 16 GA GALV. STEEL ANGLE TO SECURE BRIDGE ANGLE TO,, TYP. USE 1-1/2" X 1-1/2" X 16 GA GALV. STEEL ANGLE TO SECURE EX-1 CLIP TO,, TYP. FIELD CUT NATURA NEO LINEAR END EDGELINE TF04 TRIM** DETAIL 'A' USE 1-1/2" X 1-1/2" X 16 GA GALV. STEEL ANGLE TO SECURE BRIDGE ANGLE TO,, TYP. EX-1 CLIP 4" MAX ALONG EDGELINE TRIM, TYP. USE 1-1/2" X 1-1/2" X 16 GA GALV. STEEL ANGLE TO BRIDGE ACROSS MIN 2 S TO SUPPORT EX-1 CLIP,, TYP. 'A' FIELD-MITER TRIMS AT CORNERS AND USE EDGELINE CORNER SPLICE 'B' 12 GA HANGER WIRE, TYP. DETAIL 'B' FIELD CUT SIDE AS REQUIRED AND SECURE TO WITH MIN # X 1/2" FASTENER AT ALL PANEL/ INTERSECTIONS USE 1-1/2" X 1-1/2" X 16 GA GALV. STEEL ANGLE TO SECURE EX-1 CLIP TO,, TYP. EX-1 CLIP 4" MAX ALONG EDGELINE TRIM, TYP. EX-1 CLIP 4" MAX ALONG EDGELINE TRIM, TYP. FIELD CUT SIDE AS REQUIRED AND SECURE TO WITH MIN # X 1/2" FASTENER AT ALL PANEL/ INTERSECTIONS EDGELINE TF04 TRIM** EDGELINE TF04 TRIM** EXTRUDED ALUMINUM (THICKNESS VARIES) VENEER FINISH TO MATCH OR PAINTED CURVED APPLICATIONS AVAILABLE ONLY IN DECORATED WOOD (POWDER COATED) OR PAINTED FINISHES USE 1-1/2" X 1-1/2" X 16 GA GALV. STEEL ANGLE TO BRIDGE ACROSS MIN 2 S TO SUPPORT EX-1 CLIP,, TYP. 12'-0" EDGELINE TF04 TRIM PART LENGTH 4" 3/4" INTERIOR INSTALLATION * SHOWN, LINEAR PANEL SIMILAR **OTHER EDGELINE SIZES AVAILABLE, PLEASE CONTACT HUNTER DOUGLAS 01 Oakbrook Parkway, Suite 100 T F MATERIAL: /" FIRE RATED MDF FLOATING TRIM PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.7 DATE: 1//1

9 FIELD CUT PANEL 4 AT FIXTURES, TYP. 4" X 4" FIXTURE SHOWN, FIXTURE INDEPENDENTLY SUPPORTED IN ACCORDANCE WITH LOCAL BUILDING CODES & FIXTURE MANUFACTURER'S INSTRUCTIONS 4" X 4" FIXTURE SHOWN, & BEYOND, FIELD CUT AT FIXTURE AS REQUIRED 3 4 " TYP. 3 " CONTINUOUS NATURA NEO LINEAR 4 3 " MODULE TYP. 1 " CLEAR AT SINGLE LINEAR TYPICAL SECTION THROUGH PANELS 2'-2" MAX SPACING AT FIXTURE, TYP. SPACING AT FIXTURE, TYP. 2'-2" MAX FIXTURE INDEPENDENTLY SUPPORTED IN ACCORDANCE WITH LOCAL BUILDING CODES & FIXTURE MANUFACTURER'S INSTRUCTIONS TYPICAL ISOMETRIC SCALE: NOT TO SCALE -1/" CLEAR AT SINGLE LINEAR FIELD CUT END, TYP. 4" X 4" FIXTURE SHOWN, TYPICAL SECTION THROUGH S *VERTICAL SUPPORT OMITTED FOR CLARITY 01 Oakbrook Parkway, Suite 100 T F MATERIAL: /" FIRE RATED MDF LINEAR PANEL 4 FIXTURE RECOMMENDATION PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1. DATE: 1//1

10 FIELD CUT PANEL AT FIXTURES, TYP. " X 4" FIXTURE SHOWN, FIXTURE INDEPENDENTLY SUPPORTED IN ACCORDANCE WITH LOCAL BUILDING CODES & FIXTURE MANUFACTURER'S INSTRUCTIONS " X 4" FIXTURE SHOWN, PANEL & BEYOND, FIELD CUT AT FIXTURE AS REQUIRED 3 4 " TYP. " PANEL 3 4 " MODULE TYP " CLEAR AT SINGLE LINEAR PANEL TYPICAL SECTION THROUGH PANELS CONTINUOUS NATURA NEO LINEAR PANEL 2'-2" MAX SPACING AT FIXTURE, TYP. SPACING AT FIXTURE, TYP. 2'-2" MAX FIXTURE INDEPENDENTLY SUPPORTED IN ACCORDANCE WITH LOCAL BUILDING CODES & FIXTURE MANUFACTURER'S INSTRUCTIONS TYPICAL ISOMETRIC SCALE: NOT TO SCALE 9-1/2" CLEAR AT SINGLE LINEAR PANEL FIELD CUT PANEL END, TYP. " X 4" FIXTURE SHOWN, TYPICAL SECTION THROUGH S *VERTICAL SUPPORT OMITTED FOR CLARITY 01 Oakbrook Parkway, Suite 100 T F MATERIAL: /" FIRE RATED MDF LINEAR PANEL FIXTURE RECOMMENDATION PROJECT: PRODUCT DRAWING NUMBER: NATNEO-LINEAR-A1.9 DATE: 1//1