III II I BACKSHELLS. Amphenol.. We Connect the World Together

Transcription

1 Amphenol holds the leadership position for providing interconnect solutions that meet almost all Military, Aerospace and ndustrial standards in the U.S., Europe and Asia. With design and manufacturing facilities and sales offices spread across the globe, Amphenol offers a vast product portfolio of connectors, cable assemblies and system integration for almost all applications across various industries. BACKSHELLS Within Amphenol s wide range of interconnect products is a full range of backshell hardware. Customers can take advantage of Amphenol s global synergy for connectors, backshells and cable harnessing with one place for all their interconnect needs. Plus, coming to Amphenol for a custom design of a backshell, means that customers benefit from the vast amount of experience this global company has in designing interconnect solutions. Amphenol.. We Connect the World Together This section covers the backshells that are provided through Amphenol PCD: Backshells for Connector Family L, which includes ML-DTL Series and Series V Backshells for Connector Family K, which includes ML-DTL Series and Series Backshells for Connector Family J, which includes ML-DTL (Series 2), ML-DTL-5015 (Matrix MS345X), ML-DTL (Matrix & Pyle Series ) Matrix 2 Matrix Pyle Pyle Class L

2 Quick Reference of Products HD SJT Amphenol Backshells are available in several different types, designed for optimum performance in the application or environment it will be used in. For example; in ground and naval applications the robustness and environmental sealing may be more important, where as weight may be the prime consideration for space and Aerospace application. The following overview explains the various families of Amphenol Backshells with its applications. Some families of backshells shown here can be used without any additional protection. Some other types of backshells shown are generally used with heat shrink boots or similar protection/strain relief mechanism depending upon the specific requirements. Also, there are some clamps & nuts for the applications where varying degrees of strain reliefs and cable holding will suffice and weight saving is of higher importance. Non-Environmental Backshell Effective cable holding mechanism with good strain relief when the environmental protection of the cable termination area is not a concern. Amphenol offers cost-effective solutions by eliminating extra sealing parts. Suitable for an inside the box/climate controlled room application where heavy cabling should be supported with adequate strain relief. Environmental Backshell Not only provide the cable support and strain relief, but ensure the cable sealing and environment protection by means of high quality sealing grommet and grommet follower. The strain relief nut is tightened squeezing the grommet onto the cable jacket during assembly. Provides 6 feet water sealing protection when used with perfectly jacketed cable, and suitable for harsh environment applications. Pyle Non-Environmental EM/RF Backshell Class L 360-degree screen termination facility, in addition to other features of the Non-Environmental type. Available in straight, 90 degree bent and 45 degree bent varieties. Accommodates both individual and overall shielding. Environmental EM/RF Backshell deal choice for heavy duty cabling solutions in harsh environment situations where electromagnet and radio frequency noises are to be isolated. Accommodates both individual and overall shielding.

3 Quick Reference of Products, cont. Shrink Boot Adapter A good solution when the unshielded cables are terminated with heat shrink boots. t has a groove where the boot lip can be held which provides good grip apart from sufficient space inside for the cable looping. Using the heat shrink boot is one way of providing environmental protection and strain relief to cable termination. Using a suitable adapter is essential here to ensure the repairability. Crimp Ring Adapter Many cable terminations where heat shrink boots are used will require provision for terminating the screens too. t is achieved in this type of backshell through a ring, which can be crimped to the backshell body holding the screens in between. Band Lock Adapter Another method of termination of screens. A high quality band will do the job in this backshell. Tempered bands are tightened over the shields, which is pulled over the banding area, using a special assembly tool. Suitable over cover by heat shrink boot or some other method as chosen by the designer could be used. Both crimp ring and banded terminations give a low DC resistance. Pre-Shield Adapter Supplied with some length of braid attached. This braid overlaps with the cable braid. Effective shielding takes place due to the 360 contact of the braid. Designed to accept heat shrink boot. Ease of assembly saves time for cable termination. SQ Adapter Another cost-effective way to terminate the braid to the adapter. The cost-effective braid is pulled over the conical shape to the rear end of the adapter and then tied. The end nut is tightened to ensure adequate grip for the shielding. A heat shrink boot can be used with this adapter also. Note: The SQ adapter style is not covered in this catalog section; for more information go to

4 Quick Reference of Products, cont. Quick Clamp A light weight clamp used for securing and tidying up cable into a desired direction. Used in interior wiring of aircraft. Strain Relief Clamps Another cost effective cable holding option when environmental protection is not a concern, and weight savings is a major consideration. Secures and tidys-up the cable and also provides good strain relief at the termination area. Grommet Nut Provides a good grommet-holding force for the crimp connectors when expensive and heavy backshells are not used. Such holding force is essential to hold the contacts and grommet in place when terminated with wire bundles. Lamp Thread Adapter An adapter with threads similar to that in the lamp base for shield termination. An effective, easy and quick method of shield termination and field maintenance. Termination area can accept a nut as well as a clamp. The nut option enables the use of heat shrink boot and the clamp option will facilitate the strain relief clamping without heat shrink boot after the shield/cable termination. Note: The lamp thread adapter style is not covered in this catalog section; for more information go to

5 Angle/Profiles and Coupling Styles BACKSHELL ANGLE/PROFLES Amphenol Backshells are available in three different angular profiles: straight, 90 degree and 45 degree. These profiles will meet most of the cable routing required in the interconnect market. We can also make additional profiles if required. Please go to the web link to contact Amphenol about your specific backshell needs. Straight Backshells Straight Backshells are available in different length and cable entry diameter for most applications. Different cable and braid terminating systems are also available as shown in the respective product sections. 90 Angled Backshells Many applications require the cable to be bent and routed rather than straight routed. Amphenol offers a 90 angled style in all the Backshell families for space saving and convenience. 45 Angled Backshells Amphenol offers further design flexibility with a backshell that allows the cable to be routed 45 to the axis of the assembly. Amphenol 28 Amphenol 28 BACKSHELL COUPLNG STYLES Various coupling styles are available for the coupling between the backshell and the connector. Popular styles are shown in the respective backshell sections, and custom profiles can be designed. Please go to the web link asp to contact Amphenol about your specific backshell needs. Spin Coupling A captivated coupling nut within the backshell which provides the following advantages: Free rotation of the coupling nut which makes the assembly of the backshell to the connector easy without turning the entire backshell body. Lock wire holes are provided on the coupling nut to prevent accidental decoupling. Self-Lock Coupling Same as the Spin Coupling style with the additional feature of self-locking. nternally locks the movement of the coupling nut so that accidental decoupling is prevented. Used in higher vibration conditions. Direct Coupling The coupling nut is eliminated in this design, and the backshell directly threads to the connector. For applications when simple direct connectivity is sufficient.

6 How to Select a Suitable Backshell HOW TO SELECT A SUTABLE BACKSHELL 1. Based on the design and application considerations select the backshell type from the Quick Reference Guide, pages Review the Angle/Profiles and Coupling Styles on page 483 to determine the configuration which suits your application. 3. Scan the Connector Group Table on the next page to determine the Group Code (K, L or J) of the connector for which you require the backshell. Backshells for Connector Family L, which includes ML-DTL Series and Series V Backshells for Connector Family K, which includes ML-DTL Series and Series Backshells for Connector Family J, which includes ML-DTL (Series 2), ML-DTL-5015 (Matrix MS345X), ML-DTL (Matrix & Pyle Series ) 4. Go to the Backshell style pages within the connector family of your choice (K, L or J). Find the backshell style you need in the appropriate connector group section based on your choice of angle/profile and coupling style. 5. Build a part number from the sample part number on each backshell style page. For the material and finish options, you will need to turn to page 486 and review Table-2. Selecting a Backshell can also be done from our web link: CROSS-REFERENCE TO OTHER MANUFACTURER S BACKSHELLS f you have a Military part number or other manufacturer s part number for which you are looking for an equivalent item, we have provided a cross-reference on our web link: CUSTOM BULT BACKSHELLS Backshells for Military & Aerospace applications are governed by SAE, AS85049 standard and Amphenol Backshells are designed to meet the requirement of this standard. Though this standard covers the most popular styles of backshells, many applications call for additional styles and designs. Here is where the capability of Amphenol can support you from the concept to product realization and thereby your unique specification need is satisfied. Please visit our web link for further help:

7 Tables - By Connector Groups Connector Specification 40M M39569 Series/Class Connector Group Code K BS9520 G0001 K BS9520 G00 K BS9520 G0003 L BS9522 F0001 Patt 6 J BS9522 F0012 Patt 615 M* BS9522 F0017 Patt 105 N* BS9522 F00 Patt 608 N* BS9522 F09 Patt 616 K BS9522 F0042 BS9522 N0001 Patt 603 N* BS9522 N0003 Patt 614 K CECC CECC DEF EN 2997 EN 3645 EN 3646 EN3372 M* ESC 10 ESC11 JN1003 M* LN LN LN29729 M* ML-C J ML-DTL J ML-DTL K ML-DTL K ML-DTL L ML-DTL V L ML-DTL-5015 MS340 J ML-DTL-5015 MS345 J ML-DTL J ML-DTL J NAS 1599 By Specification (TABLE-1A) NFC93422 HE3 J NFC93422 HE306 M* NFC93422 HE308 K NFC93422 HE309 K NFL PAN PAN PAN PAN M* VG K VG M* J J J L J J L J J J J J J J J J K By Manufacturer (TABLE-1D) Amphenol/Bendix/ Connector Socapex/Pyle Group Part Number Prefix Code K 118 J 162GB N* K K M* 486 J 518 J 6GB 62GB N* 652 J 711 J 801 J J 944 J B BE BT BY1 EA EB EEG ES ET JT LJT LS MB1 MB3 MB9 MD ML94 MQ3 MT3 MT93 PTS-DR J J J J J J J J J J K K J J J K SJT M* T3 TV TVRB TVS * Connector Groups M and N are not included in this catalog section. For more information go to backshellworld.com. J L J J L J L L L L

8 HD SJT MATERALS & FNSHES Amphenol offers adapters in the following standard finishes. The base material is aluminum alloy. Materials & Finishes, Assembly Torque Values, Style-2 Configuration MATERAL: Aluminum parts: As per ASTM B 211, 221, 209, 85, 26 Steel parts: 300 series, as per AMS-QQ-S-763/ASTM A 582 Elastomers: Fluro Silcon, Silicon Other parts: Suitable corrosion resistant material ML (QPL) QUALFCATON Many Amphenol Backshells are qualified to SAE-AS standard. (Old standard is ML-C-85049). TABLE-2 (PLATNG FNSHES) Matrix 2 Amphenol Designation ML Designation Finish Guiding Specifications/Requirements A A Anodize, Black* To meet AS85049 requirements B Anodize, Hard* AMS-A-8625, Type-, Class-1 L Nickel, Bright AMS-QQ-290, Class-1, Grade-F M Electroless Nickel AMS-C-26074, Class-4, Grade-B N N Electroless Nickel To meet AS85049 requirements T Cadmium, Bright AMS-QQ-P-416, Type-, Class-2 U Cadmium, Olive drab AMS-QQ-P-416, Type, Class 3 V Cadmium, Olive drab over Electroless Nickel AMS-QQ-P-416, Type-, Class-3 (Cadmium); AMS-C-26074, Class-4, grade-b (Nickel) W W Cadmium, Olive drab over Electroless Nickel To meet AS85049 requirements Y Zinc-Cobalt, Dark Olive drab ASTM-B840 Z Zinc-Cobalt, Black ASTM-B840 For availability of other finishes, your special requirements: sales@backshellworld.com * Non conductive coatings. Pyle Class L ASSEMBLY TORQUE VALUES Amphenol recommends the following torque values for its adapters while assembling them to the connectors. These values are based on the coupling thread strength specified in SAE-AS85049 standard. Connector Shell Size Torque (nch-pounds) 8, , 10, 10SL, , 12, 12S, , 14S, , 16S, , 19, , 21, , , 25, STYLE-2 CONFGURATON Some design consideration will require bigger diameter cable to be terminated in the smaller shell size connectors. Cable with heavy/thicker shielding, many wires for different branches/ routing are some of the examples. Such cable termination will require a bigger adapter body with cable entry dimensions more than the connector rear side dimensions Amphenol also supports this kind of application. The coupling end of the adapter will be modified to Style-2 design as shown in the figure below in such cases. The overall length of the Style-2 design adapters would be increased by approx. 1 inch (25.mm) as shown. This alternative design is applicable for all the Backshell Families listed in this catalog. Ø A 1.00 NCH (MAX.) 25.4 MM (MAX.)

9 Non-Environmental Backshell Straight, Spin Coupling For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V B 1.35"(34.29mm) MAX CABLE RANGE CLAMP Y ML Series 21: Straight, Spin Coupling ML Part Number M85049 / W 03 A Length: (Omit for STD ) Clamp Size: Shell Size: See Table- 2 TABLE A ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) B (MAX) Y (MAX) CLAMP / MN MAX LENGTH SZE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM / A / B / C A A / D A A A A 17/E A TABLE CONTNUES ON NEXT PAGE

10 Non-Environmental Backshell Straight, Spin Coupling, cont. For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V TABLE A, Cont. ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) B (MAX) Y (MAX) CLAMP / MN MAX LENGTH SZE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM 05 A , cont. 17/E A A A A 19 / F A A / G / H TABLE CONTNUES ON NEXT PAGE

11 Non-Environmental Backshell Straight, Spin Coupling, cont. For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V TABLE A, Cont. ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) B (MAX) Y (MAX) CLAMP / MN MAX LENGTH SZE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM , cont. 23 / H / J

12 Non-Environmental EM/RF Backshell Straight, Spin Coupling For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V L 1.35"(34.29mm) MAX ML Series 19: Straight, Spin Coupling Shell Size: CLAMP ML Part Number M85049 / W 03 A Length: (Omit for STD ) Clamp Size: CABLE RANGE Y TABLE-A ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) L (MAX) Y (MAX) CLAMP / MN MAX LENGTH SZE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM / A / B / C A A / D A A TABLE CONTNUES ON NEXT PAGE

13 Non-Environmental EM/RF Backshell Straight, Spin Coupling, cont. For Connector Family L Connector Family L, includes ML-DTL Series Series, V and Series V TABLE-A, cont. ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) L (MAX) Y (MAX) CLAMP / MN MAX LENGTH SZE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM A A A 17 / E A A A A A 19 / F A A / G TABLE CONTNUES ON NEXT PAGE

14 Non-Environmental EM/RF Backshell Straight, Spin Coupling, cont. For Connector Family L Connector Family L, includes ML-DTL Series Series, V and Series V TABLE-A, cont. ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) L (MAX) Y (MAX) CLAMP / MN MAX LENGTH SZE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM / H / J

15 Environmental EM/RF Backshell Straight, Spin Coupling For Connector Family L Series, V B Connector Family L, includes ML-DTL Series and Series V X CLAMP CABLE RANGE Y ML Series 18: Straight, Spin Coupling Shell Size: ML Part Number M85049 / W 03 A Length: (Omit for STD ) Clamp Size: TABLE A ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) B (MAX) X (MAX) Y (MAX) CLAMP LENGTH / MN MAX SZE CODE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM / A / B / C A A / D A A A A A 17 / E A A TABLE CONTNUES ON NEXT PAGE

16 Straight, Spin Coupling, cont. For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V TABLE A, cont. ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) B (MAX) X (MAX) Y (MAX) CLAMP LENGTH / MN MAX SZE CODE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM 03 A A A 19 / F A A / G / H Environmental EM/RF Backshell TABLE CONTNUES ON NEXT PAGE

17 Environmental EM/RF Backshell Straight, Spin Coupling, cont. For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V TABLE A, cont. ML PART NUMBER DESGNATOR CABLE RANGE A DA. (MAX) B (MAX) X (MAX) Y (MAX) CLAMP LENGTH / MN MAX SZE CODE CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM 1, , cont / H / J Matrix Pyle

18 Environmental EM/RF Backshell 90 and 45, Spin Coupling For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V D ML Series ML Part Number M85049 / W DEGREE E 79: 90, Spin Coupling 78: 45, Spin Coupling Shell Size: See Table-B Clamp Size: See Table-B B CLAMP CABLE RANGE Y C CLAMP 45 DEGREE CABLE RANGE Y TABLE B ML PART NUMBER A DA. DESGNATOR CABLE RANGE B (MAX) C (MAX) D (MAX) E (MAX) Y (MAX) (MAX) / CLAMP MN MAX CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM SZE NCH MM NCH MM / A / B / C / D / E TABLE CONTNUES ON NEXT PAGE

19 Environmental EM/RF Backshell 90 and 45, Spin Coupling, cont. For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V TABLE B, cont. ML PART NUMBER A DA. DESGNATOR CABLE RANGE B (MAX) C (MAX) D (MAX) E (MAX) Y (MAX) (MAX) / CLAMP MN MAX CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM SZE NCH MM NCH MM / F / G / H / J

20 Shrink Boot Adapter Straight, Spin Coupling, cont. For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V 0.71"(18.03mm)MAX ØB ØC ML Series 69: Straight, Spin Coupling ML Part Number M85049 / W D D: Drain hole Option Shell Size: TABLE-A ML PART NUMBER DESGNATOR / CODE (REF.) A DA. (MAX) B DA. (MN) C DA. (MAX) NCH MM NCH MM NCH MM 9 09 / A / B / C / D / E / F / G / H / J

21 Crimp Ring Adapter Straight, Spin Coupling without Ring For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V 1.30"(33.mm)MAX ML Series ML Part Number M85049 / W ØB ØC 20: Straight, Spin Coupling Adapter without ring Shell Size: Refer to page 544 for ordering details of Ring. ML PART NUMBER DESGNATOR / CODE (REF.) TABLE A A DA.(MAX) B DA.(MAX) C DA.(MAX) NCH MM NCH MM NCH MM 9 9 / A / B / C / D / E / F / G / H / J Matrix 2 Matrix Pyle Pyle Class L

22 Band Lock Adapter Straight, 90 and 45, Self-Lock For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V 1.60"(40.64mm) REF 1.35"(34.29mm) MAX ØB ØG ML Series 88: Straight, Self-Lock 90: 90, Self-Lock 89: 45, Self-Lock ML Part Number M85049 / W 03 Entry Size: Shell Size: STRAGHT E C D 90 DEGREE 45 DEGREE F ØB ØG ØB ØG ML PART NUMBER DESGNATOR ENTRY SZE TABLE-A B DA. (MAX) A DA. (MAX) C (MAX) D (MAX) E (MAX) F (MAX.) G MAX / CODE (REF.) NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM N/A N/A N/A N/A 09 / A N/A N/A N/A N/A 11 / B / C / D / E / F / G / H / J

23 Pre-Shield Adapter Straight, 90, Spin Coupling/Self-Lock with Shield For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V 1.19 MAX (30.2)MAX 6.00 (152.40) ML Series ML Part Number M85049 / T W 03-6 D Drain Hole Option J MAX. Y STRAGHT 90 DEGREE W Z 115: Straight 117: 90 Coupling: : Spin Coupling S: Self-Lock Shell Size: Shield Length: 6 inches min. 18 inches max. 1 inch increments 6: 6 inch, 7: 7 inch, so on Entry Size: & B Y H Shield (Material: Copper) K: Nickel T: Tin 6.00 (152.4) W Z PART NUMBER DESGNATOR SHELL ALLOWABLE SZE- ENTRY SZE ML MN MAX TABLE A / CODE (REF.) A DA.(MAX) H (MAX) J (MAX) NCH MM NCH MM NCH MM / A / B / C / D / E / F / G / H / J ENTRY SZE W ±0.0 W ±0.508 TABLE B Y Y Z MAX Z MAX NCH MM NCH MM NCH MM Matrix Pyle

24 Quick Clamp 90 and 45, Self-Lock/Non Self-Lock For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V F 0.69"(17.53mm)MAX 90 DEGREE ML Series 16: 90 15: 45 ML Part Number M85049 / W Shell Size: G GROUND LUG OPTONAL CABLE ENTRY(MAX) Coupling: S: Self-Lock G: Self-Lock with grounding Lug : Non Self-Lock E D 45 DEGREE GROUND LUG OPTONAL CABLE ENTRY(MAX) ML PART NUMBER DESGNATOR / CODE (REF.) TABLE A A DA.(MAX) D (MAX) E (MAX) F (MAX) G (MAX) CABLE ENTRY MAX NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM 9 9 / A / B / C / D / E / F / G / H / J

25 Strain Relief Clamp Straight, 90, Self-Lock/Non Self-Lock For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V (NON SELF-LOCK) ØB (SELF-LOCK) C E (NON SELF-LOCK) F (SELF-LOCK) J D STRAGHT CABLE ENTRY ML Series 38: Straight 39: 90 ML Part Number M85049 / W Shell Size: Coupling: S: Self-Lock : Non Self-Lock ØB (SELF-LOCK) 90 DEGREE K ML PART NUMBER DESGNATOR CABLE ENTRY / CODE (REF.) TABLE A A DA.(MAX) B DA.(MAX) C (MAX) D (MAX) E (MAX) F (MAX) NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM 09 9 / A / B / C / D / E / F / G / H / J Matrix Pyle ML PART NUMBER DESGNATOR / CODE (REF.) TABLE A, cont. J (MAX) K (MAX) CABLE ENTRY NCH MM NCH MM MN MAX NCH MM NCH MM 9 9 / A / B / C / D / E / F / G / H / J

26 Strain Relief Clamp Straight, Self-Lock/Non Self-Lock For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V C B D E ML Series 124: Straight ML Part Number M85049 / W Shell Size: Coupling: S: Self-Lock : Non Self-Lock ML PART NUMBER DESGNATOR / CODE (REF.) TABLE A A DA.(MAX) B LENGTH C (MAX) D (MAX) E (CLOSED) ±.031 ±.787 NCH MM NCH MM NCH MM NCH MM NCH MM 09 9 / A / / / B / / / C / / / D / / / E / / / F / / / G / / / H / / / J / /

27 Strain Relief Clamp 90, Self-Lock/Non Self-Lock For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V C B ML Series 126: 90 ML Part Number M85049 / W Shell Size: D Coupling: S: Self-Lock : Non Self-Lock E Matrix 2 ML PART NUMBER DESGNATOR / CODE (REF.) TABLE A A DA.(MAX) B (MAX) C (MAX) D (MAX) E (CLOSED) ±.031 ±.787 NCH MM NCH MM NCH MM NCH MM NCH MM 09 9 / A / B / C / D / E / F / G / H / J Matrix Pyle Pyle Class L

28 Composite Strain Relief Clamp Straight, Spin Coupling, Self-Lock For Connector Family L HD Series, V Connector Family L, includes ML-DTL Series and Series V SJT L (16.80) MAX M B C 0.09 (2.3) MN (12.7) ±0.06 (1.5) SCREW LENGTH E 0.09 (2.3) MN Series: Angle: S: Straight ML Part Number BS1 S R L X T Coupling: R: Spin S: Self-Lock Connector Group: ML-DTL Series & V Shell Size: Material & T: Composite, without plating J: Composite, Cadmium Olive Drab M: Composite, Electroless Nickel Constant: X Length: 9: For standard length in Table-A Entry Size: 99: For standard entry size in Table-A Pyle Matrix 2 Class L ML PART NUMBER DESGNATOR / CODE (REF.) A DA.(MAX) TABLE A B (MAX) C (MAX) E (MN) L (MAX) M ±0.031 ±0.78 ±.0.03 ±.0.76 NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM 08 9 / A / B / C / D / E / F / G / H / J

29 Grommet Nut Straight, Self-Lock/Non Self-Lock For Connector Family L Series, V Connector Family L, includes ML-DTL Series and Series V 0.38"(9.65mm) MAX ØB ML Series 14: Straight ML Part Number M85049 / W Shell Size: 0.66"(16.76mm) MAX Coupling: S: Self-Lock : Non Self-Lock Note: * Slot shown in figure is optional for Non Self-Lock ML PART NUMBER DESGNATOR / CODE (REF.) TABLE A A DA.(MAX) B (MAX) NCH MM NCH MM 9 09 / A / B / C / D / E / F / G / H / J Matrix Pyle

30 HD SJT L Non-Environmental Backshell Straight, Direct Coupling For Connector Family K Series Series 1.31"(33.3mm) MAX CLAMP CABLE RANGE Y ML Series 29: Straight, Direct Coupling Connector Family K, includes ML-DTL Series and Series ML Part Number M85049 / W 06 A Length: (Omit for STD ) Clamp Size: PCB Options Others Fiber Class L Pyle Matrix 2 Contacts Optics ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE LENGTH SE / TABLE A Shell Size: See Table- 2 CABLE RANGE L (MAX) Y (MAX) MN MAX NCH MM NCH MM A / A A / A A A / A A A B A B / 15 A B A B NCH MM NCH MM TABLE CONTNUES ON NEXT PAGE

31 Non-Environmental Backshell Straight, Direct Coupling, cont. For Connector Family K Series Series Connector Family K, includes ML-DTL Series and Series ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE LENGTH SE / TABLE A CABLE RANGE L (MAX) Y (MAX) MN MAX NCH MM NCH MM NCH MM NCH MM A B A B A 16 / B A B A B A B A B A 18 / B A B A B A B C A B C A B C / 21 A B C A B C A B C TABLE CONTNUES ON NEXT PAGE Matrix 2 Matrix Pyle Pyle Class L

32 HD SJT PCB Matrix 2 Pyle Class L ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE LENGTH Non-Environmental Backshell Straight, Direct Coupling, cont. For Connector Family K Series Series SE / TABLE A Connector Family K, includes ML-DTL Series and Series CABLE RANGE L (MAX) Y (MAX) MN MAX NCH MM NCH MM NCH MM NCH MM 03 A B C A B C A B C A / B C A B C A B C A B C A B C A B C A B C A / B C A B C A B C A B C

33 Non-Environmental EM/RF Backshell Straight, Direct Coupling For Connector Family K Series Series Connector Family K, includes ML-DTL Series and Series L CLAMP 1.31"(33.33mm) MAX CABLE RANGE Y ML Series 36: Straight, Direct Coupling Shell Size ML Part Number M85049 / W 03 A Length (Omit for STD ) Clamp Size: ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE LENGTH CODE SE / TABLE-A CABLE RANGE L (MAX) Y (MAX) MN MAX NCH MM NCH MM NCH MM NCH MM / / / A A / 15 A A A A A 16 / A A TABLE CONTNUES ON NEXT PAGE Matrix 2 Matrix Pyle Pyle Class L

34 HD ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE LENGTH CODE Straight, Direct Coupling, cont. For Connector Family K Series Series SE / TABLE-A, cont. CABLE RANGE L (MAX) Y (MAX) MN MAX NCH MM NCH MM NCH MM NCH MM A A A 18 / A A / Non-Environmental EM/RF Backshell Connector Family K, includes ML-DTL Series and Series TABLE CONTNUES ON NEXT PAGE

35 Non-Environmental EM/RF Backshell Straight, Direct Coupling, cont. For Connector Family K Series Series Connector Family K, includes ML-DTL Series and Series TABLE-A, cont. ML PART NUMBER DESGNATOR CABLE RANGE L (MAX) Y (MAX) ACCESSORY CLAMP LENGTH MN MAX SZE CODE SE / NCH MM NCH MM NCH MM NCH MM / / HD PCB Matrix 2 Matrix Pyle Pyle Class L

36 HD SJT PCB L Environmental EM/RF Backshell Straight, Direct Coupling For Connector Family K Series Series X CLAMP CABLE RANGE Y ML Series 17: Straight, Direct Coupling Shell Size Connector Family K, includes ML-DTL Series and Series ML Part Number M85049 / W 03 A Length (Omit for STD ) Clamp Size: Matrix 2 Pyle Class L ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE TABLE A CABLE RANGE L (MAX) X (MAX) Y (MAX) LENGTH MN MAX SE / NCH MM NCH MM NCH MM NCH MM NCH MM / / / A A / 15 A A A A A 16 / A A TABLE CONTNUES ON NEXT PAGE

37 Environmental EM/RF Backshell Straight, Direct Coupling, cont. For Connector Family K Series Series ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE SE / 18 / / /23 Connector Family K, includes ML-DTL Series and Series TABLE A, cont. CABLE RANGE L (MAX) X (MAX) Y (MAX) LENGTH MN MAX NCH MM NCH MM NCH MM NCH MM NCH MM A A A A A HD SJT PCB Fiber Optics Contacts Matrix 2 Matrix Pyle Pyle Class L TABLE CONTNUES ON NEXT PAGE

38 HD ML PART NUMBER DESGNATOR ACCESSORY CLAMP SZE 22, cont SE / 22 / / 25 Straight, Direct Coupling, cont. For Connector Family K Series Series TABLE A, cont. Environmental EM/RF Backshell Connector Family K, includes ML-DTL Series and Series CABLE RANGE L (MAX) X (MAX) Y (MAX) LENGTH MN MAX NCH MM NCH MM NCH MM NCH MM NCH MM

39 Environmental EM/RF Backshell 90 and 45 Spin Coupling For Connector Family K Series Series D E Connector Family K, includes ML-DTL Series and Series 90 DEGREE ML Series 76: 90 Spin Coupling 77: 45 Spin Coupling Shell Size See Table-B ML Part Number M85049 / W 01 Clamp Size: See Table-B B CLAMP CABLE RANGE Y C CLAMP 45 DEGREE CABLE RANGE Y TABLE B ML PART NUMBER A DA. DESGNATOR CABLE RANGE B (MAX) C (MAX) D (MAX) E (MAX) Y (MAX) (MAX) ACCESSORY CLAMP MN MAX SE / NCH MM NCH MM NCH MM NCH MM NCH MM NCH MM SZE NCH MM NCH MM / / / / / / TABLE CONTNUES ON NEXT PAGE