This is to attest that

Transcription

1 This is to attest that BELL-SOUTHCN TESTING LABORATORY (SHENZHEN) JUNXIANG DA BUILDING, NUMBER 9 OF ZHONGSHAN PARK ROAD NANSHAN DISTRICT, SHENZHEN, GUANGDONG, PEOPLE'S REPUBLIC OF CHINA Testing Laboratory TL-525 has met the requirements of the IAS Accreditation Criteria for Testing Laboratories (AC89), has demonstrated compliance with ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration laboratories, and has been accredited, commencing August 31, 2016, for the test methods listed in the approved scope of accreditation. (See laboratory s scope of accreditation for fields of testing and accredited test methods.) This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See for current accreditation information, or contact IAS at C.P. Ramani, P.E., C.B.O President

2 IAS Accreditation Number Accredited Entity Address Contact Name TL-525 Bell-Southcn Testing Laboratory (Shenzhen) JunXiang Da Building, Number 9 of Zhongshan Park Road Nanshan District, Shenzhen Guangdong People's Republic of China Peter Tao Director Telephone Marketing@bell-southcn.com Effective Date of Scope August 31, 2016 Accreditation Standard ISO/IEC 17025:2005 FIELDS OF TESTING ENERGY STAR Program Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) ANSI C : Specifications for Performance of Self- Ballasted Compact Fluorescent Lamps ANSI C : Electric Lamps A, G, PS and Similar Shapes with E26 Medium Screw Bases ANSI C : ANSI C (R2003): ANSI/ANSLG C : ANSI C : ANSI C : ANSI C : ANSI/ANSLG C : ANSI/ANSLG C : ANSI C : Electric Lamps PAR and R Shapes Incandescent Lamps Miscellaneous Types For Incandescent Lamps: Tungsten Halogen Lamps (non-vehicle) Electric Lamps Classification of the Beam Patterns of Reflector Lamps Electric Lamps Assigned LED Lamp Codes Electric Lamps Nomenclature for Envelope Shapes Intended for Use with Electric Lamps Double- Capped Fluorescent Lamps Dimensional and Electrical Characteristics for Incandescent Lamps: Tungsten Halogen Lamps (non-vehicle) American National Standard for Fluorescent Lamps Guide for Electrical Measurements Page 2 of 21

3 ENERGY STAR Program Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) ANSI C : ANSI C : ANSI C : ANSI C : ANSI C : Electric Lamps Specifications for the Chromaticity of Fluorescent Lamps Electric Lamps Specifications for the Chromaticity of Fluorescent Lamps Chromaticity of Solid State Lighting Products Chromaticity of Solid State Lighting Products Electric Lamps Classification of the Beam Pattern of Reflector Lamps ANSI C (R2009): ANSI C : ANSI C : ANSI C : ANSI C : ANSI C : ANSI/IEEE C ANSI/UL : ANSI/UL : ANSI/UL : ANSI/UL : Electric Lamps, High Intensity Discharge, Methods of Measuring Characteristics Single-Based Fluorescent Lamps Dimensional and Electrical Characteristics Fluorescent Lamp Ballasts Methods of Measurement Ballast for High Intensity Discharge Lamps Methods of Measurement High-Frequency Fluorescent Lamp Ballasts Harmonic Emission Limits Related Power Quality Requirements for Lighting Recommended Practice on Characterization of Surges in Low-Voltage (1000V and Less) AC Power Circuits Portable Electric Luminaires Normal temperature tests only Portable Electric Luminaires Normal temperature tests only Track Lighting Systems Luminaires Normal temperature tests only Page 3 of 21

4 ENERGY STAR Program Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) ASTM G : Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials CIE : Method of Measuring and Specifying Color Rendering of Light Sources CIE : CIE : IES LM : IES LM : IES LM : IES LM : IES LM : IES LM : IES LM : IES LM : IES LM : IES LM : Colorimetry Standard The Measurement of Luminous Flux Approved Method for the Electrical and Photometric Measurements of Fluorescent Lamps Photometric Testing of Outdoor Fluorescent Luminaires Practical Guide to Colorimetry of Light Sources IES Approved Method for Photometry of Reflector Type Lamps Photometric Testing of Roadway Luminaires Using Incandescent Filament and HID Lamps Photometric Testing of Floodlights Using High Intensity Discharge or Incandescent Filament Lamps Approved Method for Life Testing of Fluorescent Lamps Approved Method for Photometric Testing of Indoor Fluorescent Luminaries Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps Photometric Testing of Indoor Luminaires Using High Intensity Discharger Incandescent Filament Lamps Page 4 of 21

5 ENERGY STAR Program Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) IES LM : Approved Method of Life Testing for High Intensity Discharge (HID) Lamps IES LM : Approved Method of Life Testing for Incandescent Filament Lamps IES LM : IES LM IES LM : IES LM : IES LM IES LM : IES LM : IES LM (R2010): IES LM : IES LM : IES LM : IES LM : Approved Method for the Electrical and Photometric Measurements of High Intensity Discharge Lamps IES Guide to Lamp Seasoning Guide to Spectroradiometric Measurements Approved Method for Life Testing of Single- Ended Compact Fluorescent Lamps Approved Method for Life Testing of Single- Ended Compact Fluorescent Lamps Electrical and Photometric Measurements of Single-Ended Compact Fluorescent Lamp Electrical and Photometric Measurements of Single-Ended Compact Fluorescent Lamps Photometric Testing of Entertainment Lighting Luminaires Approved Method for Electrical and Photometric Measurements of Solid-State Lighting Products, Sections 9, 10 and 12 Approved Method for Measuring Lumen Maintenance of LED Light Sources (LED Packages/Modules/Arrays) Approved Method for Measuring Lumen Maintenance of LED Light Sources (LED Packages/Modules/Arrays) Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties as a Function of Temperature Page 5 of 21

6 ENERGY STAR Program Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) IES LM : Approved Method for Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaires IES LM : Electrical and Photometric Measurements of High-Power IES LM IES TM : IES TM : IES TM-28-14: IES TM : EPA CFL v4.3 (Annex A): EPA Lamp v2.0: EPA Luminaires v2.0: EPA DLS v1.5: EPA Lamp v2.0: EPA Lamp v2.0: Measuring Luminous Flux and Color Maintenance of Remote Phosphor Components Projecting Long Term Lumen Maintenance of LED Light Sources Methods for Projecting Catastrophic Failure Projecting Long-Term Luminous Flux Maintenance of LED Lamps and Luminaires Evaluating Light Source Color Rendition ENERGY STAR Elevated Temperature Test Procedure (Annex A) Elevated Temperature Test per ENERGY STAR CFL Version 4.3 ENERGY STAR Program Requirements for Lamps (Light Bulbs) Version 2.0 ENERGY STAR Program Requirements Product Specification for Luminaires (Light Fixtures) Version 2.0 ENERGY STAR Program Requirements for Decorative Light Strings Version 1.5 Ambient Temperature Life Test Method (September-2015) Elevated Temperature Life Test Method (September-2015) Page 6 of 21

7 ENERGY STAR Program Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) EPA Lamp v2.0: Elevated Temperature Light Output Ratio Test Method (September-2015) EPA Lamp v2.0 Recommended Practice - Light Output on a Dimmer (December-2015) EPA Lamp v2.0 EPA Lamp v2.0 and Luminaires v2.0: EPA Lamp v2.0 and Luminaires v2.0: EPA Lamp v2.0 and Luminaires v2.0: EPA Lamp v1.0: EPA Lamp v1.0: EPA Lamp v1.0: EPA Lamp v1.0: EPA Lamp v1.0: EPA Lamp v1.0: EPA Lamp v1.0: NEMA SSL 7A- 2013: NEMA SSL 7A- 2013: ASA S /ISO3745:2012: Recommended Practice - Light Source Flicker (December-2015) Noise Test Method (September-2015) Run-up Time Test Method(September- 2015) Start Time Test Method (September-2015) Elevated Temperature Life Test Method Elevated Temperature Light Output Ratio Test Method Ambient Temperature Life Test Method Light Source Flicker Method Noise Test Method Run-up Time Test Method Start Time Test Method Rate of LED Packages Phase Cut Dimming for Solid-State Lighting- Basic Compatibility. Rate of LED Packages Phase Cut Dimming for Solid-State Lighting- Basic Compatibility Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Precision Methods Anechoic and Hemi- Anechoic Rooms Page 7 of 21

8 ENERGY STAR Program Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) DOE 10 CFR 429: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment DOE 10 CFR 430: Energy Conservation Program for Consumer Products Appendix Q to Subpart B of Part 430- Uniform Test Method for Measuring the Energy Consumption of Fluorescent Lamp Ballasts Appendix R to Subpart B of Part 430- Uniform Test Method for Measuring Average Lamp Efficacy (LE), Color Rendering Index (CRI), and Correlated Color Temperature (CCT) of Electric Lamps Appendix V to Subpart B of Part 430- Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan Light Kits With Pin-Based Sockets for Fluorescent Lamps Appendix V1 to Subpart B of Part 430- Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan Light Kits Packaged With Other Fluorescent Lamps (not Compact Fluorescent Lamps or General Service Fluorescent Lamps), Packaged With Other SSL Lamps (not Integrated LED Lamps), or With Integrated SSL Circuitry Appendix W to Subpart B of Part 430- Uniform Test Method for Measuring the Energy Consumption of Medium Base Compact Fluorescent Lamps Appendix Z to Subpart B of Part 430- Uniform Test Method for Measuring the Energy Consumption of External Power Supplies Appendix BB to Subpart B of Part 430- Uniform Test Method for Measuring the Input Power, Lumen Output, Lamp Efficacy, Correlated Color Temperature (CCT), Color Rendering Index (CRI), Power Factor, Time to Failure, and Standby Mode Power of Integrated Light-Emitting Diode (LED) Lamps DOE 10CFR Uniform Test Method for the Measurement of Energy Efficiency and Standby Mode Energy Consumption of Metal Halide Lamp Ballasts Page 8 of 21

9 Energy Efficiency (Not ENERGY STAR specific) SA/SNZ Lighting for roads and public spaces TS1158.6:2015: Part 6: Luminaires Performance AS : AS/NZS : AS/NZS :2010 : AS/NZS :2008: AS/NZS :2010: AS/NZS :2014: AS/NZS : CAN/CSA-C (R2013): CAN/CSA-C819-11: CAN/CSA-C654-10: CAN/CSA-C860-11: CAN/CSA C861-10: CAN/CSA C862-09: Interior lighting - Measurement, calculation and presentation of photometric data Performance of external power supplies Part 1: Test method and energy performance mark Self ballasted lamps for general lighting services Part 1: Test methods Energy performance Performance of transformers and electronic step-down convertors for ELV lamps - Part 1: Test method - Energy performance Performance of transformers and electronic step-down convertors for ELV lamps - Part 2: Minimum Energy Performance Standards (MEPS) requirements Incandescent lamps for general lighting service Part 1: Test methods Energy performance Incandescent lamps for general lighting services Part 2: Minimum Energy Performance Standards (MEPS) requirements Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies Performance of general service fluorescent lamps Fluorescent lamp ballast efficacy measurements Performance of internally lighted exit signs Performance of self-ballasted compact fluorescent lamps and ballasted adapters Performance of incandescent reflector lamps Page 9 of 21

10 Energy Efficiency (Not ENERGY STAR specific) (continued) CIE : CIE : CIE : The Spectroradiometric Measurement of Light Sources The Measurement of Absolute Luminous Intensity Distributions; The Photometry and Goniophotometry of Luminaires CIE 121-SP1:2009: CIE : CIE : CIE S 025/E:2015: EN / IEC 60081: 2010: EN / IEC A5: 2013: EN/IEC60901: 2012: EN / IEC 60969: 2001: EN /IEC : 2011: EN 61341:2011: IEC/TR61341:2010: EU 874/2012: EU 1194/2012: The Photometery and Goniophotometry of Luminaires, Supplement 1: Luminaires for Emergency Lighting Measurement of LEDs Colour Rendering of White LED Light Sources Test Method for LED Lamps, LED Luminaires and LED Modules Double-capped fluorescent lamps - Performance specifications Double-capped fluorescent lamps Performance specifications Single-capped fluorescent lamps - Performance specifications Self-ballasted lamps for general lighting services - Performance requirements Lamp controlgear -Part 2-3:Particular Requirements for A.C. Supplied Electronic Ballasts for Fluorescent Lamps Method of measurement of centre beam intensity and beam angle(s) of reflector lamps Energy Labeling of Electrical Lamps and Luminaires (Only Article 5 and applicable Annexes) Eco-Design Requirements for Directional Lamps, Light Emitting Diode Lamps, and Related Equipment (Only Article 4 and applicable Annexes) Page 10 of 21

11 Energy Efficiency (Not ENERGY STAR specific) (continued) IEC : Household Electrical Appliances - Measurement of standby power IEC : LED modules for general lighting Performance requirements IEC :2014: IEC : 2014: IEC 62612:2013: IEC 62612: : EN : EN : EN :2007 EN :2011 EN :2014 EN : 2012 Luminaire performance Part 1: General requirements Luminaire performance Part 2-1: Particular requirements for LED-luminaires Self-ballasted LED-lamps for general lighting services Performance requirements Self-ballasted LED-lamps for general lighting services Performance requirements Light and lighting - Measurement and and luminaires - Part 1: Measurement and file format Light and lighting - Measurement and and luminaires - Part 2: Presentation of data for indoor and outdoor work places Light and lighting - Measurement and and luminaires - Part 3: Presentation of data for emergency lighting of work places Light and lighting - Lighting of work places - Part 1: Indoor work places Light and lighting - Lighting of work places - Part 2: Outdoor work places Light and lighting - Measurement and and luminaires - Part 1: Measurement and file format Page 11 of 21

12 Energy Efficiency (Not ENERGY STAR specific) (continued) EN :2004: Light and lighting - Measurement and and luminaires - Part 2: Presentation of data for indoor and outdoor work places EN :2007: EN :2007: EN :2015: IEC : 2014 Edition. 2.0 IEC : 2014 Edition 2.0 IEC : 2014 Edition 1.0 IEC : 2009 Edition 1.0 IEC : 2009 Edition 1.0 IEC : 2011 Edition 1.0 Light and lighting - Measurement and and luminaires - Part 2: Presentation of data for indoor and outdoor work places Light and lighting - Measurement and and luminaires Part 3: Presentation of data for emergency lighting of work places Light and lighting - Measurement and and luminaires - Part 4: LED lamps, modules and luminaires 101: General requirements - System components 102: General requirements - Control gear 103: General requirements - Control devices 207: Particular requirements for control gear - LED modules (device type 6) 208: Particular requirements for control gear - Switching function (device type 7) 209: Particular requirements for control gear - Colour control (device type 8) Page 12 of 21

13 Energy Efficiency (Not ENERGY STAR specific) (continued) IEC :2011 Energy performance of lamp controlgear - Edition 1.0 Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear IEC :2014 Edition 1.0: JIS C :2011 JIS C : JIS C 8131:2013 JIS C :2012- AMD1:2014: JIS C : JIS C :2013: JIS C 8153:2009: Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear Luminaires -- Part 3: General requirements for performance Luminaires -- Part 5: Gonio-photometric methods Luminaires for road lighting Photometry of white light emitting diode for general lighting -- Part 1: LED packages (Amendment 1) Photometry of white light emitting diode for general lighting -- Part 2: LED modules and LED light engines Photometry of white light emitting diode for general lighting -- Part 3: measurement methods for lumen maintenance DC or AC supplied electronic control gear for LED modules -- Performance requirements JIS C 8155:2010: LED modules for general lighting service -- Performance requirements JIS C 8157:2011: JIS C 8158:2012: Self-ballasted LED-lamps for general lighting services > 50 V -- Performance requirements Self-ballasted LED-lamps for general lighting services by voltage > 50 V -Safety specifications Page 13 of 21

14 Energy Efficiency (Not ENERGY STAR specific) (continued) EN :2004: Light and lighting - Measurement and and luminaires - Part 2: Presentation of data for indoor and outdoor work places EN :2007: EN :2007: EN :2015: IEC : 2014 Edition. 2.0 IEC : 2014 Edition 2.0 IEC : 2014 Edition 1.0 IEC : 2009 Edition 1.0 IEC : 2009 Edition 1.0 IEC : 2011 Edition 1.0 Light and lighting - Measurement and and luminaires - Part 2: Presentation of data for indoor and outdoor work places Light and lighting - Measurement and and luminaires Part 3: Presentation of data for emergency lighting of work places Light and lighting - Measurement and and luminaires - Part 4: LED lamps, modules and luminaires 101: General requirements - System components 102: General requirements - Control gear 103: General requirements - Control devices 207: Particular requirements for control gear - LED modules (device type 6) 208: Particular requirements for control gear - Switching function (device type 7) 209: Particular requirements for control gear - Colour control (device type 8) Page 14 of 21

15 Energy Efficiency (Not ENERGY STAR specific) (continued) JIS C :2013: Non-integrated linear LED lamps with GX16t-5 cap for general lighting services -- Part 2: Performance requirements Brazil Inmetro Regulation No. 389/2014: Technical Regulation of Quality For Self- Ballasted LED lamps Brazil Inmetro's Ordinance No.144/2015: Conformity Evaluation Requirements For LED Lamps With Device Integrated Onto The Base Safety Testing Standards ANSI/UL : Portable Electric Luminaires ANSI/UL 1598C- 2014: CSA C22.2 NO (R2008): CSA C22.2 NO : ANSI/UL : CSA C22.2 NO : CSA C22.2 NO : UL : CSA C22.2 NO : ANSI/UL CSA C22.2 NO (R2011): ANSI/UL : Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits Portable Luminaires Portable Luminaires Seasonal and Holiday Decorative Products Decorative: Lighting Products Portable Luminaires Stage and Studio Luminaires and Connector Strips Stage and Studio Luminaires Track Lighting Systems General Requirements for Luminaires Self-Ballasted Lamps and Lamp Adapters Page 15 of 21

16 Safety Testing Standards (continued) CSA C22.2 NO : ANSI/UL : CSA C22.2 NO : Self-Ballasted Lamps and Lamp Adapters Luminaires Luminaires CSA CSA T.I.L. NO. B-79: ANSI/UL : CSA C22.2 NO : ANSI/UL : CSA C22.2 NO : ANSI/UL (R2014): ANSI/UL : ANSI/UL : CSA C22.2 NO : Requirements for Retrofitted Luminaires and LED Retrofit Kits for Installation into Previously Installed Luminaires Low Voltage Lighting Systems Extra Low Voltage Landscape Lighting Systems Light Emitting Diode (LED) Equipment for Use in Lighting Products Light Emitting Diode (LED) Equipment for Lighting Applications Fluorescent-Lamp Ballasts High-Intensity-Discharge Lamp Ballasts Class2 Power Units Power Supplies with Extra-Low-Voltage Class 2 Outputs UL : Power Units Other Than Class 2 CSA C22.2 NO : EN/ IEC Edition : EN/ IEC : 2015: General Use Power Supplies Luminaires - Part 1: General requirements and tests Luminaires - Part 1: General requirements and tests Page 16 of 21

17 Safety Testing Standards (continued) EN/IEC : Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires EN/IEC Edition : EN/IEC : N/ IEC Edition : EN/ IEC Edition : EN/ IEC AMD : AS/NZS : EN/IEC Edition 3.0: EN/IEC Edition 2.0: EN/IEC Edition 2.0: EN/ IEC EN/ IEC : EN/ IEC : EN/IEC Edition 4.0: Luminaires - Part 2-2: Particular requirements - Recessed luminaires Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires EN/ IEC :2015:Luminaires - Part 2-5: Particular requirements - Floodlights Luminaires. Part 2: Particular requirements. Section Seven: Portable luminaires for garden use Luminaires - Particular requirements Portable luminaires for children Luminaires- Part 2-8: Particular requirements Handlamps Luminaires - Part 2-10: Particular requirements Portable Luminaires for children Luminaires - Part 2-11: Particular requirements Aquarium luminaires Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires Luminaires. Part 2: Particular requirements. Section Seventeen - Luminaires for stage lighting, television and film studios (outdoor and indoor) Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications Luminaires - Part 2-20: Particular requirements - Lighting chains Page 17 of 21

18 Safety Testing Standards (continued) EN/IEC Edition 1.0: Luminaires - Part 2-21: Particular requirements - Rope lights EN/IEC Edition 4.0: EN/IEC Edition 2.0: EN/IEC : EN/IEC : EN/IEC Edition 1.0: EN/ IEC Edition : EN/ IEC : EN/ IEC Edition 2.0-AMD : EN/ IEC : EN/ IEC Edition : EN/ IEC Edition : EN/ IEC Edition : Luminaires for emergency lighting Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures Degrees of protection provided by en closures for electrical equipment against external mechanical impacts (IK code) Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications LED lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications Self-ballasted LED-lamps for general lighting services by voltage> 50 V- Safety specifications Self-ballasted LED-lamps for general lighting services by voltage> 50 V- Safety specifications Lamp controlgear - Part 1: General and safety requirements Lamp controlgear - Part 1: General and safety requirements Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules LED modules for general lighting - Safety specifications Page 18 of 21

19 Safety Testing Standards (continued) EN/ IEC : LED modules for general lighting - Safety specifications EN/ IEC : EN/ IEC : AS/NZS : AS/NZS (R2013): AS/NZS : AS/NZS : AS/NZS : AS/NZS : AS/NZS : AS/NZS : AS/NZS : AS/NZS : AS/NZS : AS/NZS : DC or AC supplied electronic control gear for LED modules - Performance requirements DC or AC supplied electronic control gear for LED modules - Performance requirements Luminaires - General requirements and tests Fixed general purpose luminaire Fixed general purpose luminaire Recessed luminaires Recessed luminaires Luminaires for road and street lighting Portable general purpose luminaires Floodlights Portable luminaires for garden use Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor) Luminaires for swimming pools and similar applications Luminaires Particular requirements - Lighting chains Page 19 of 21

20 Safety Testing Standards (continued) AS/NZS : Luminaires Particular requirements - Luminaires for emergency lighting AS/NZS IEC 62560:2014 AS/NZS : AS/NZS : AS/NZS IEC : JIS C : JIS C : JIS C : JIS C : JIS C : JIS C : JIS C : JIS C : Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lamp controlgear - General and safety requirements Lamp controlgear - General and safety requirements Lamp controlgear - Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules Luminaires -- Part 1: General requirements for safety Luminaires -- Part 2: Particular requirements for safety -- Section 1: Fixed general purpose luminaires Luminaires -- Part 2: Particular requirements for safety -- Section 2: Recessed luminaires Luminaires -- Part 2-3: Particular requirements for safety -- Luminaires for road and street lighting Luminaires -- Part 2: Particular requirements for safety -- Section 4: Portable general purpose luminaires Luminaires -- Part 2: Particular requirements for safety -- Section 5: Floodlights Luminaires -- Part 2-7: Particular requirements for safety -- Portable luminaires for garden use Luminaires -- Part 2-13: Particular requirements -- Ground recessed luminaires Page 20 of 21

21 Safety Testing Standards (continued) JIS C : Luminaires -- Part 2-17: Particular requirements for safety -- Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor) JIS C : JIS C : JIS C : JIS C : JIS C : JIS C : JIS C : Luminaires -- Part 2-20: Particular requirements for safety -- Lighting chains Lamp controlgear -- Part 1: General and safety requirements Lamp controlgear -- Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires Lamp controlgear -- Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules LED modules for general lighting -- Safety specifications Self-ballasted LED-lamps for general lighting services by voltage > 50 V -- Safety specifications Non-integrated linear LED lamps with GX16t-5 cap for general lighting services -- Part 1: Safety specifications Page 21 of 21