AIR COOLED CONDENSERS with EC AXIAL FANS

Size: px
Start display at page:

Download "AIR COOLED CONDENSERS with EC AXIAL FANS"

Transcription

1 AIR COOLED CONDENSERS with EC AXIAL FANS SELECTION GUIDE

2 2

3 TABLE OF CONTENTS EC Fan Remote Outdoor Type Model GHRC...4 Model Identifi cation...4 Condenser Selection Chart...5 Condenser Capacities...6 Condenser Electrical Data...7 GHRC kw single circuit dimensional/electrical data...8 GHRC kw single circuit dimensional data...9 GHRC kw dual circuit dimensional data...10 GHRC kw dual circuit dimensional details...11 GHRC kw dimensional data

4 EC FAN REMOTE OUTDOOR TYPE MODEL GHRC Unit cabinets are constructed of heavy gauge aluminum, thoroughly reinforced with riveted gussets. Fan outlets provide additional strength to fan panel and assure even airfl ow for quiet operation. Mounting legs are constructed of heavy gauge aluminum and are shipped with the unit for fi eld installation. The condenser coil is constructed of plate type die formed, aluminum fi ns mechanically bonded to copper tubes and employ full height, self-spacing collars which completely cover the tube surface. The coil is pressure and leak tested at 425 PSIG air under warm water, evacuated, dehydrated, and sealed with caps on connections. Axial type electronically commutated (EC) fans, carefully matched to the coil, cover a large percentage of the coil face area providing a uniform air distribution. The direct drive fans have plastic blades securely fastened to the EC motor rotor. All fans are statically and dynamically balanced before shipment and operate at low tip speeds for minimum vibration and low sound levels. The fan motors are energy effi cient electronically commutated external rotor three phase motors with maintenance free permanently lubricated ball bearings and integrated electronics. All motors are soft start, integrated current limiting and variable speed. All motors are factory wired with leads terminating in a weather-protected junction box located on the outside of the unit casing. Fan motors are 1.04 kw, variable speed. Units are operational down to -13 F. The fan guards are constructed of heavy gauge, close meshed steel wire phosphated and coated in plastic for corrosion resistance. All Data Aire GHRC type condensers are E.T.L. listed. 4

5 GHRC Condenser Selection Chart Ambient Temperature 95º 100º 105º Model THR Condenser MBH Condenser MBH Condenser MBH MINI Ceiling DAMA GHRC GHRC GHRC DAMA GHRC GHRC GHRC DAMA GHRC GHRC GHRC DAMA GHRC GHRC GHRC MINI-PLUS Ceiling DAPA GHRC GHRC GHRC DAPA GHRC GHRC GHRC DAPA GHRC GHRC GHRC DAPA GHRC GHRC GHRC LARGE CEILING Single Circuit DALA GHRC GHRC GHRC DALA GHRC GHRC GHRC DALA GHRC GHRC GHRC DALA GHRC GHRC GHRC Dual Circuits DALA GHRC GHRC GHRC DALA GHRC GHRC GHRC DALA GHRC GHRC GHRC DALA GHRC GHRC GHRC DATA TEMP DTAx GHRC GHRC GHRC DTAx GHRC GHRC GHRC DTAx GHRC GHRC GHRC DTAx GHRC GHRC GHRC MODULAR DATA TEMP DTAx GHRC GHRC GHRC DTAx GHRC GHRC GHRC DTAx GHRC GHRC GHRC DATA AIRE DAAx GHRC GHRC GHRC DAAx GHRC GHRC GHRC DAAx GHRC GHRC GHRC DAAx GHRC GHRC GHRC DAAx GHRC GHRC GHRC DAAx GHRC GHRC GHRC DAAx GHRC GHRC GHRC DAAx GHRC GHRC GHRC gforce GT GTA* GHRC GHRC GHRC GTA* GHRC GHRC GHRC GTA* GHRC GHRC GHRC GTA* GHRC GHRC GHRC gforce GFA* GHRC GHRC GHRC GFA* GHRC GHRC GHRC GFA* GHRC GHRC GHRC GFA* GHRC GHRC GHRC GFA* GHRC GHRC GHRC GFA* GHRC GHRC GHRC GFA* GHRC GHRC GHRC GFA* GHRC GHRC GHRC

6 GHRC Condenser Capacities MBH at MBH at MBH at MBH at MBH at MBH at Model 1 TD 10 TD 15 TD 20 TD 25 TD 30 TD GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC GHRC ,096.2 GHRC , ,200.0 GHRC , ,347.6 GHRC , , ,537.2 TD Temperature difference between the condensing temperatures minus the ambient temperature. 6

7 GHRC Condenser Electrical Data 208/3/60 460/3/60 Model FLA/MCA/MOP FLA/MCA/MOP GHRC /4.1/15 1.7/2.1/15 GHRC /4.1/15 1.7/2.1/15 GHRC /4.1/15 1.7/2.1/15 GHRC /4.1/15 1.7/2.1/15 GHRC /4.1/15 1.7/2.1/15 GHRC /7.4/15 3.4/3.8/15 GHRC /7.4/15 3.4/3.8/15 GHRC /7.4/15 3.4/3.8/15 GHRC /11/15 5.1/5.5/15 GHRC /11/15 5.1/5.5/15 GHRC /11/15 5.1/5.5/15 GHRC /14/15 6.8/7.2/15 GHRC /14/15 6.8/7.2/15 GHRC /14/15 6.8/7.2/15 GHRC /17/20 8.5/8.9/15 GHRC /17/20 8.5/8.9/15 GHRC /21/25 10/11/15 GHRC /27/30 14/14/15 GHRC /27/30 14/14/15 GHRC /27/30 14/14/15 GHRC /34/45 17/17/20 GHRC /34/45 17/17/20 7

8 Air Cooled Condensers kw - single circuit 8

9 Air Cooled Condensers kw - single circuit 9

10 Air Cooled Condensers kw dual circuit 10

11 Air Cooled Condensers kw dual circuit 11

12 Air Cooled Condenser kw 12

13 Notes 13

14 230 W. BlueRidge Avenue Orange, CA A Member of the CS Group of Companies 2011 Data Aire, Inc. Data Aire, Inc. reserves the right to make design changes for the purpose of product improvement or to withdraw any design without notice. ACCEC-SG 11/2010 Rev A

SPLIT DUCTED UNIT TECHNICAL SELECTION DATA SRA141C / SRA140E SPECIFICATION SUMMARY UNIT FEATURES CONTROL FEATURES CONTROL OPTIONS. PLENUMS (Optional)

SPLIT DUCTED UNIT TECHNICAL SELECTION DATA SRA141C / SRA140E SPECIFICATION SUMMARY UNIT FEATURES CONTROL FEATURES CONTROL OPTIONS. PLENUMS (Optional) TECHNICAL SELECTION DATA SPLIT DUCTED UNIT 1 SINGLE PHASE SCROLL SINGLE STAGE SS M SOFT START CENTRIFUGAL LOUVRE AXIAL UNIT FEATURES Scroll Compressor Multiple Speed Outdoor Fans Single Phase Soft Starter

More information

OPERATING USER MANUAL for PRESSURE RECORDERS

OPERATING USER MANUAL for PRESSURE RECORDERS Serial No. OPERATING USER MANUAL for PRESSURE RECORDERS MNW-004 Rev. F 01/04/19 Reorder Stock No. PD1013 Palmer Wahl Instruments, Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853

More information

Thomas Scientific Swedesboro, NJ U.S.A.

Thomas Scientific Swedesboro, NJ U.S.A. Thomas Scientific Swedesboro, NJ 08085-0099 U.S.A. Wiley Mini Mill 3383-L10 (115 V, 60 HZ) USE AND CARE OF CATALOG NUMBER: 3383-L10 Wiley Mini Mill (115 V, 60 HZ) PRELIMINARY 1. Mill has been properly

More information

SO-LOW LAB FREEZERS TO -85 C

SO-LOW LAB FREEZERS TO -85 C WWW.SO-LOW.COM E-MAIL: SALES@SO-LOW.COM SO-LOW LAB FREEZERS TO -85 C RESEARCH - TESTING CLINICAL APPLICATIONS PHARMACY FREEZERS LIFE SCIENCES INDUSTRIAL USE ENVIRONMENTAL EQUIPMENT CO., INC. 10310 Spartan

More information

A cost effective, compact and reliable PWM drive for 1/4 through 1 HP DC applications

A cost effective, compact and reliable PWM drive for 1/4 through 1 HP DC applications A cost effective, compact and reliable PWM drive for 1/4 through 1 HP DC applications The Micro 100 Drives have been designed with a Pulse Width Modulated (PWM) regulator to produce clean DC current to

More information

Product Catalog. Split System ACDS-PRC003E-EN. Air-Cooled Condensers 20 to 120 Tons. April 2016

Product Catalog. Split System ACDS-PRC003E-EN. Air-Cooled Condensers 20 to 120 Tons. April 2016 Product Catalog Split System Air-Cooled Condensers 20 to 120 Tons April 2016 ACDS-PRC003E-EN Introduction Trane has the right condenser... If you are designing a new system or replacing an existing aircooled

More information

HALSEY TAYLOR OWNERS MANUAL Contour TM Series Barrier-Free Water Coolers Refrigerated Fountains with Back Panel

HALSEY TAYLOR OWNERS MANUAL Contour TM Series Barrier-Free Water Coolers Refrigerated Fountains with Back Panel HALSEY TAYLOR OWNERS MANUAL Contour TM Series BarrierFree Water Coolers Refrigerated Fountains with Back Panel Figure HRFSERQ Figure HRFERQ Figure HRFSRQ Figure Not Shown Model HRFSERQ HRFERQ HRFSRQ HRFESRQ

More information

Metal Bending Tools, Scribes & Awls

Metal Bending Tools, Scribes & Awls Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127

More information

STARTING SERIAL NUMBER PARTS LIST FOR. Wellsaw MODEL 600 METAL CUTTING BAND SAW

STARTING SERIAL NUMBER PARTS LIST FOR. Wellsaw MODEL 600 METAL CUTTING BAND SAW STARTING SERIAL NUMBER 11075 PARTS LIST FOR Wellsaw MODEL 600 METAL CUTTING BAND SAW Wellsaw 2829 N. Burdick, Kalamazoo, MI 49004 Phone: 269-345-1132 Fax: 269-345-0095 Rev 171005 INSTALLATION, OPERATION

More information

Best MATERIALS.com Discount Warehouse

Best MATERIALS.com Discount Warehouse Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

ELECTRIC TUBE ROLLER

ELECTRIC TUBE ROLLER 41238-0000 ELECTRIC TUBE ROLLER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 8/20/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,

More information

Mobile Weapons Storage System Specifications

Mobile Weapons Storage System Specifications Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS ROTARY VANE POSITIVE DISPLACEMENT DRY-AIR PUMPS VAPOR-OIL PUMPS MADE IN AMERICA SINCE 1939 CONGRATULATIONS! You have purchased one of the most dependable and thoroughly proven Rotary

More information

Rotron PROPIMAX 3 Tubeaxial Fans

Rotron PROPIMAX 3 Tubeaxial Fans Rotron PROPIMAX Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible

More information

COMMERCIAL AIR CONDITIONERS M O D U L A R D E S I G N & F L E X I B L E C O M B I N A T I O N

COMMERCIAL AIR CONDITIONERS M O D U L A R D E S I G N & F L E X I B L E C O M B I N A T I O N COMMERCIAL AIR CONDITIONERS DIGITAL SCROLL SYSTEMS M O D U L A R D E S I G N & F L E X I B L E C O M B I N A T I O N C O M M E R C I A L S D V I I I A I R C O N D I T I O N E R S SDV III WELCOME TO THE

More information

New Product Release: October 2014 Boone Racks

New Product Release: October 2014 Boone Racks New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance

More information

FRANK. Technologies for the construction industry. Egcodorn Shear force dowel for expansion joints

FRANK. Technologies for the construction industry. Egcodorn Shear force dowel for expansion joints FRANK Technologies for the construction industry Egcodorn Shear force dowel for expansion joints Contents Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfi ng Germany Phone +49 9427 189-0 Fax +49 9427

More information

VAV Rectangular Terminal Units

VAV Rectangular Terminal Units RSVQ VAV Rectangular Terminal Units RSVQ Variable Air Volume (VAV) HVAC systems are the best solution to guarantee high levels of comfort and energy effi ciency in civil and industrial applications VAV

More information

13acd MERIT SERIES R 22 A I R C O N D I T I O N E R S. SEER up to to 5 Tons Cooling Capacity 17,500 to 60,000 Btuh

13acd MERIT SERIES R 22 A I R C O N D I T I O N E R S. SEER up to to 5 Tons Cooling Capacity 17,500 to 60,000 Btuh E N G I N E E R I N G D A T A A I R C O N D I T I O N E R S 13acd MERIT SERIES R 22 Bulletin No. 210423 April 2008 Supersedes January 2008 SEER up to 14.0 1.5 to 5 Tons Cooling Capacity 17,500 to 60,000

More information

2. All work and materials shall be in full accordance with Local and State ordinance and with any prevailing rules and regulations.

2. All work and materials shall be in full accordance with Local and State ordinance and with any prevailing rules and regulations. General Conditions: 1. Deliver all food service equipment as specified herein, including that which is reasonably inferred, with all related items necessary to complete work shown on contract drawings

More information

Reliance SG800 Series Steel Water Gage Valves

Reliance SG800 Series Steel Water Gage Valves Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,

More information

MUELLER GAS. DH-5 Drilling Machine. For use on 1 1 /2 & 2 Line Stopper Fittings. Reliable Connections. General Information 2

MUELLER GAS. DH-5 Drilling Machine. For use on 1 1 /2 & 2 Line Stopper Fittings. Reliable Connections. General Information 2 operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine For use on 1 1 /2 & 2 Line Stopper Fittings General Information 2 Installing and Stopping-off 1 1 /2 and 2 Line Stopper

More information

AC centrifugal fan - RadiCal

AC centrifugal fan - RadiCal RE5-R9-9 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Rotron ½ AXIMAX 1 Small Vaneaxial Fans

Rotron ½ AXIMAX 1 Small Vaneaxial Fans Rotron ½ AXIMAX Small Vaneaxial Fans General Small Vaneaxial Information Small Vaneaxial Fans are compact, high-speed fans whose airflow is parallel to the motor shaft. The impeller and guide vanes are

More information

lumenbeam Specification Sheet

lumenbeam Specification Sheet Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Heavy aluminum formed yoke (standard yoke included) Stainless steel hardware

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal RG5-RE7- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-746 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Mustang GT350 Caliper Stud Installation Instructions

Mustang GT350 Caliper Stud Installation Instructions 2015-2017 Mustang GT350 Caliper Stud Installation Instructions Congratulations on your purchase. The use of these studs will allow for much quicker brake pad changes as the six piston Brembo calipers on

More information

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and

More information

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both

More information

OPERATING USER MANUAL

OPERATING USER MANUAL Serial No. OPERATING USER MANUAL for TEMPERATURE RECORDERS MNW-003 Rev. F 01/04/19 Reorder Stock No. PD1014 Palmer Wahl Instruments, Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853

More information

Seamers, Folding Tools & Brake

Seamers, Folding Tools & Brake Hand Seamers with Die-Cast Zinc Jaws S5 Compact 5 (127 mm) Jaws with Big 2 (51 mm) Bending Depth Hand Seamers with Forged Steel Jaws Seamers, Folding Tools Not for use with steel S9 Big 9 (229 mm) Jaws

More information

AC axial compact fan

AC axial compact fan WE5-HL6- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual Outdoor Water Solutions, Inc. 9 Backyard Windmill Installation Manual Customer Service: -866-7-6 Website: www.outdoorwatersolutions.com Springdale, Arkansas 72762 Phone: -866-7-6 Fax: (79) 750-978 Thank

More information

4 T V H A D A A

4 T V H A D A A 4 T V H 0 0 8 6 A D 0 0 0 A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Name All of units Outline Function Outdoor unit installation manual 1 Outdoor unit user manual 1 Be sure to deliver it to the customer

More information

Model 511 Model 711 Model 821

Model 511 Model 711 Model 821 Stainless Steel Tru-Balance Model 511 Model 711 Model 821 Shown with front lift off shield removed The ultimate in reliable performance, capacity, versatility and sanitation for your sifting or screening

More information

SPECIFICATION FOR HORIZONTAL AIRFLOW OUTDOOR RESISTIVE LOAD BANK

SPECIFICATION FOR HORIZONTAL AIRFLOW OUTDOOR RESISTIVE LOAD BANK SPECIFICATION FOR HORIZONTAL AIRFLOW OUTDOOR RESISTIVE LOAD BANK PART 1.0 GENERAL 1.1 SCOPE A. This specification contains the minimum requirements for the design, manufacture and testing of a UL listed,

More information

MODEL 2EA/2EB DOOR INSTALLATION INSTUCTIONS

MODEL 2EA/2EB DOOR INSTALLATION INSTUCTIONS Dover Roller Shutters wants to THANK YOU for your purchase of the 2EA/2EB Aluminum Roll-Up Door! BEFORE INSTALLATION Please carefully read the instruction manual completely. Carefully unpack the contents

More information

MT MOTORI ELETTRICI. Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D

MT MOTORI ELETTRICI. Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D MT MOTORI ELETTRICI Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D TABLE OF CONTENTS 1. Introduction 2. Scope of application 3. Installation

More information

EC centrifugal fan. forward curved, dual inlet with housing (flange)

EC centrifugal fan. forward curved, dual inlet with housing (flange) D3G46-AH- ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court

More information

SERVICE INSTRUCTIONS

SERVICE INSTRUCTIONS SERVICE INSTRUCTIONS TURBINE MIXER MODEL TO, TCL & TC DRIVE SERIES F MANUAL NO. 05-47775 REVISED 03/2016 CUSTOMER: P.O. NO.: ITEM NO.: MIXER MODEL NO.: MIXER SERIAL NO.: DRIVE SERIES & SIZE: INPUT ASSEMBLY

More information

Series 80 In-Line Mounted Centrifugal Pumps

Series 80 In-Line Mounted Centrifugal Pumps Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space

More information

lumenbeam Specification Sheet

lumenbeam Specification Sheet Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Heavy aluminum formed yoke (standard yoke included) Stainless steel hardware

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal RG-RD- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

AC centrifugal fan. forward curved, dual inlet with housing (without flange)

AC centrifugal fan. forward curved, dual inlet with housing (without flange) ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59

More information

Threadlocking Adhesives

Threadlocking Adhesives Threadlocking Adhesives Locking of Threaded Fasteners Why use a Threadlocker? threadlocking products prevent self-loosening and secure any threaded fastener against vibration and shock loads. They are

More information

PROformanceHoops.com

PROformanceHoops.com PROformanceHoops.com WHAT MAKES US DIFFERENT? We promote quality family playtime, fitness and fun by delivering your family the safest, most stable and most durable in-ground basketball hoop in the industry.

More information

EC centrifugal fan. forward curved, dual inlet with housing (large flange)

EC centrifugal fan. forward curved, dual inlet with housing (large flange) D3G146-HQ13-4 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County

More information

PT-510 and PT-510W Series User Manual ma APG. Doc # Rev A, 02/2017

PT-510 and PT-510W Series User Manual ma APG. Doc # Rev A, 02/2017 PT-510 and PT-510W Series User Manual 4-20 ma APG R Doc #9005031 Rev A, 02/2017 Table of Contents Introduction... iii Warranty and Warranty Restrictions... iv Chapter 1: Specifications and Options... 1

More information

AC axial fan. sickled blades (S series)

AC axial fan. sickled blades (S series) 4E45-P- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL SPECIFICATION FOR APPROVAL Customer : STD Description : DC FAN Customer Part No. REV. : Delta Model No. : REV. : 01 Sample Issue No. : Sample Issue Date : JUN.19 2017 PLEASE SEND ONE COPY OF THIS SPECIFICAITON

More information

Pneumatic Drill / / Technical Specification

Pneumatic Drill / / Technical Specification CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506

More information

MANUFACTURING INC. Specifications

MANUFACTURING INC. Specifications Page 1 of 4 GENERAL 11 Aluminum security screen doors must be tested by a recognized testing laboratory to conform to SMA 6001-2002 Proposed American National Standard Specifications for Metal Protection

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal R3G9-RB- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

AC centrifugal fan. forward curved, single inlet with housing (flange)

AC centrifugal fan. forward curved, single inlet with housing (flange) ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59

More information

Automotive BL-DC Fans for Commercial Vehicles. Edition

Automotive BL-DC Fans for Commercial Vehicles. Edition utomotive BL-DC Fans for Commercial Vehicles Edition 5- utomotive BL-DC Fans for Commercial Vehicles Our automotive products BL-DC axial fans and BL-DC dual centrifugal fans with housing are ground breakers

More information

PD Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT

PD Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT PD-440 - Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT Ex GST Inc GST $780.00 $858.00 ORDER CODE: MODEL: Type - Bench / Pedestal : Duty Type: Drill Capacity (mm): Spindle Taper (MT): D598 PD-440

More information

AC axial compact fan

AC axial compact fan WE5-HJ8- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

REPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer

REPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer Cat. No. 9-0 SDS Max Demolition Hammer Cat. No. -0 SDS Max Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 8-9-0 d 000 8-9-0 d Special Tools Require Forcing

More information

Series 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om

Series 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment

More information

AC centrifugal fan. R2E180-AS backward curved, single inlet. Nominal data

AC centrifugal fan.     R2E180-AS backward curved, single inlet. Nominal data Nominal data Type Motor ME68-BF Phase ~ ~ Nominal voltage VAC Frequency Hz 5 6 Type of data definition fa fa Valid for approval / standard CE CE Speed min - Power input W 8 Current draw A.6.5 Motor capacitor

More information

1.1. Multi-Panel Series

1.1. Multi-Panel Series Multi-Panel Series 1.1.100 The Multi-Panel, or MP, concept accommodates independent multiple sign panels for total flexibility, changeability and replacement. Winner of The Certificate of Recognition for

More information

INSTALLATION MANUAL STORAGE

INSTALLATION MANUAL STORAGE IMVersion 1.1 INSTALLATION MANUAL GENERAL GUIDE: The information in this IM is intended to serve as a general guide to proper installation with no warranties intended or implied. Prime Panels assumes no

More information

Metal Drilling

Metal Drilling www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle

More information

30AUTO Speed Lathe Manual

30AUTO Speed Lathe Manual 30AUTO Speed Lathe Manual Standard Features 3/4 HP Motor Air-Collet Closure 1800 RPM, Single Speed Electric Brake Cast Housing 5C Collets 3 Phase / 240 Volts DESCRIPTION: The Crozier Model 30AUTO Automotive

More information

Guardsman. Galvanized Ornamental Steel Fence Solutions

Guardsman. Galvanized Ornamental Steel Fence Solutions Guardsman Galvanized Ornamental Steel Fence Solutions FENCE SOLUTIONS IN ORNAMENTAL CHAIN LINK WOOD PVC ACCESS CONTROL WWW.MERCHANTSMETALS.COM 866-888-5611 Guardsman combines the traditional style and

More information

BSC Industrial Storage Cabinet

BSC Industrial Storage Cabinet BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W

More information

Casting Units. Casting Units ACCESORIES ACCUCAST CASTING MACHINES - BUFFALO ACCUCAST CASTING MACHINES - BUFFALO

Casting Units. Casting Units ACCESORIES ACCUCAST CASTING MACHINES - BUFFALO ACCUCAST CASTING MACHINES - BUFFALO www.usdentaldepot.com - sales@usdentaldepot.com - 1 1-866-625-5558 - 1-954-874-6325 ACCESORIES BEGO - 112903 Termico Water Cooling Unit Ea BEGO - Termico Water Cooling Ciruculation Unit Accesories for

More information

Product Guide Specification

Product Guide Specification Zurn Industries, LLC November 2014 1801 Pittsburgh Avenue Erie, PA 16502 Toll Free (855) 663-9876 Phone (814) 455-0921 Fax (814) 871-6141 Website www.zurn.com Product Guide Specification Specifier Notes:

More information

EC centrifugal fan. forward curved, dual inlet with housing (flange)

EC centrifugal fan. forward curved, dual inlet with housing (flange) ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

INDUSTRIAL DIRECT DRIVE 12 Ambient (Unheated) Air Curtain Data Sheet

INDUSTRIAL DIRECT DRIVE 12 Ambient (Unheated) Air Curtain Data Sheet INDUSTRIAL DIRECT DRIVE 12 Ambient (Unheated) Air Curtain Data Sheet For Door Heights To 12 (environmental separation) and 10 (insect control) STANDARD CONSTRUCTION ½ hp single speed motor(s) - direct

More information

Cross Flow Fans. Additional Information. Cooling Fans. Introduction E-85 MF Series E-88 MFD Series E-92

Cross Flow Fans. Additional Information. Cooling Fans. Introduction E-85 MF Series E-88 MFD Series E-92 Cross Flow Fans Additional Information Technical Reference F-1 General Information G-1 Introduction E-85 MF Series E-88 MFD Series E-92 E-84 ORIENTAL MOTOR GENERAL CATALOG 23/24 Cross Flow Fans Cross flow

More information

General Information. Ball Curb Valve

General Information. Ball Curb Valve General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)

More information

concealed sprinkler cover plate assemblies

concealed sprinkler cover plate assemblies Page of 5. DESCRIPTION Viking Plates are low-profile covers used with Viking Concealed s. The covers are installed flush with the ceiling or wall to provide a smooth appearance, are available in several

More information

AC centrifugal fan. Limited partnership Headquarters Mulfingen County court Stuttgart HRA

AC centrifugal fan. Limited partnership Headquarters Mulfingen County court Stuttgart HRA GE6-Y7- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

TOOLS AND INSTALLATION

TOOLS AND INSTALLATION TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and

More information

Support Stands & Conveyor Mountings. Parts, Assembly & Maintenance Manual. Steel Support Stand. Aluminum Support Stand Rev.

Support Stands & Conveyor Mountings. Parts, Assembly & Maintenance Manual. Steel Support Stand. Aluminum Support Stand Rev. Support Stands & Conveyor Mountings Parts, Assembly & Maintenance Manual Aluminum Support Stand Steel Support Stand -00 Rev. B Table of Contents Safe Practices............................... Foreword....................................

More information

PureAir. Oil-less Compressors

PureAir. Oil-less Compressors PureAir Oil-less Compressors 2 Oil-less Pure Air Series New Technology Creates New Applications With the perfection of oil-less air technology by Gardner Denver, new applications are being developed everyday:

More information

Features. Continuous Duty Cycle Actuators

Features. Continuous Duty Cycle Actuators Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed

More information

System protection by Vibration monitoring

System protection by Vibration monitoring Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans System protection by Vibration monitoring for fans 2 Ventilatoren Vibration monitoring for fans

More information

Side. Channel Blower APEX DARGANG MACHINERY CORPORATION

Side. Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower Construction External bearing Cool-running Long life Motor Industrial quality /60Hz Squired-cage motor totally enclosed(ip55 )

More information

A SRF/SERF A SRF/SERF

A SRF/SERF A SRF/SERF A1100-055SRF/SERF A1100-056SRF/SERF Remote Fill Assembly INSTALLATION INSTRUCTIONS **CRITICAL - MUST READ** This unit can only be used for new installations or tank level retrofits that allow access to

More information

INDUSTRIAL DIRECT DRIVE 16 Electric Heated Air Curtain Data Sheet

INDUSTRIAL DIRECT DRIVE 16 Electric Heated Air Curtain Data Sheet For Door Heights To 16 (environmental separation) INDUSTRIAL DIRECT DRIVE 16 Data Sheet STANDARD CONSTRUCTION Single speed T.E.A.O. motor(s) - direct drive Gray powder coated exterior (Optional: Custom

More information

* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty.

* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty. Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Heavy aluminum formed yoke Stainless steel hardware Silicone sealing devices

More information

N35 ALUMINIUM ROLL-UP DOOR INSTALLATION MANUAL

N35 ALUMINIUM ROLL-UP DOOR INSTALLATION MANUAL N35 ALUMINIUM ROLL-UP DOOR INSTALLATION MANUAL DOVER ROLLER SHUTTERS 295 COMMERCE WAY P.O. BOX 420 UPPER SANDUSKY, OH 43351 Dover Roller Shutters wants to THANK YOU for your purchase of the N35 Aluminum

More information

REMEDI. LED Multi-function Bed Light

REMEDI. LED Multi-function Bed Light REMEDI LED Multi-function Bed Light APPLICATIONS PATIENT ROOMS EXAMINATION ROOMS PRE- AND POST-OP AREAS PHYSICIAN S OFFICES CLINICS REMEDI PRODUCT OVERVIEW Remedi blends architectural aesthetics with leading

More information

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment

More information

Installation and Maintenance Manual IM 770-1

Installation and Maintenance Manual IM 770-1 Installation and Maintenance Manual IM 770-1 Group: Applied Air Systems Part Number: IM 770 Date: March 2014 Skyline Outdoor Air Handler Roof Curb Table of Contents General Description... 3 Curb-Ready

More information

Reliance SG777 Series Steel Water Gage Valves

Reliance SG777 Series Steel Water Gage Valves Installation, Operation, & Maintenance Instructions R500.SG777 10/16/2016 Reliance SG777 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,

More information

A. Product Data: For each electrical identification product indicated.

A. Product Data: For each electrical identification product indicated. SECTION 16075 - ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

The Da-Lite Difference.

The Da-Lite Difference. The Da-Lite Difference. FRONT PROJECTION SCREENS SCREEN COMPANY TABLE OF CONTENTS Model Type Concealed- Without Doors Concealed- With Doors Ceiling Wall Concealedor Surface Floor Mount Page Tensioned Advantage

More information

LOCKER SPECIFIERS GUIDE. The standard of excellence for business, industry and institutions. Lockers Cabinets Shelving

LOCKER SPECIFIERS GUIDE. The standard of excellence for business, industry and institutions. Lockers Cabinets Shelving LOCKER SPECIFIERS GUIDE Lockers Cabinets Shelving The standard of excellence for business, industry and institutions FINISH GUIDE NANO METAL ROLLER LATCHING SYSTEM For unmatched security, nano metal roller

More information

SBD-25A - Bench Drill 20mm Drill Capacity 2MT

SBD-25A - Bench Drill 20mm Drill Capacity 2MT SBD-25A - Bench Drill 20mm Drill Capacity 2MT ORDER CODE: D144 MODEL: SBD-25A Type - Bench / Pedestal : Bench Duty Type: Heavy-Duty Drill Capacity (mm): 20 Spindle Taper (MT): 2 Spindle Travel (mm): 80

More information

H2-50 Hydrogen Generator Field Update

H2-50 Hydrogen Generator Field Update This field update is intended to provide extra protection in the event the H2 generation cell fractures or cracks. Please add the additional parts to your H2-50 as soon as possible. Please take a digital

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity

More information

PI734F - Winding 07. Technical Data Sheet APPROVED DOCUMENT

PI734F - Winding 07. Technical Data Sheet APPROVED DOCUMENT - Winding 07 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 34 and the relevant sections of other national and international standards

More information

CARTRIDGE-STYLE RECOVERY POWDER BOOTH

CARTRIDGE-STYLE RECOVERY POWDER BOOTH CARTRIDGE-STYLE RECOVERY POWDER BOOT Environmentally Safe Cartridge-Style Recovery Powder Booths exceed safety and code requirements NFPA-33, IFC to protect those that work in any industrial spray environment,

More information

MS HYDRAULIC GUILLOTINE SHEAR

MS HYDRAULIC GUILLOTINE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere

More information

Tape Measure Metal Clippers Screw Bit Set With Extensions

Tape Measure Metal Clippers Screw Bit Set With Extensions IMPORTANT: Read through instructions thoroughly before beginning to replace any damaged material. Minor damage can be fixed with a fiberglass repair kit and color matched paint. Tools Required Tape Measure

More information