(Indore) - (Ahamedabad) - (Jaipur) (Jodhpur) (Kota) - (Raj.)

Transcription

1 UPVC Door WINDOW (Indore) - (Ahamedabad) - (Jaipur) (Jodhpur) (Kota) - (Raj.) Rithayla Industrial Area New Delhi Mob. No.: www:herbaaplapsupvc@gmail.com

2 UV. Effect in India India is High UV Sensitive Country As windows are exposed to all harsh & extreme weathers, it is important that these UPVC windows can sustain the High UV radiations in India.. In the High UV regions as illustrated in the map, the UPVC profiles are likely to change colors get yellow & grayish brown won t look nice. It can happen if they are not formulated with enough portions of UV stabilizers & Titanium Dioxide (TiO2). These additives are very expensive compared to PVC raisins and Calcium Carbonate /filler. The low grade & unbranded profile making companies especially from china save on these in order to sell cheap in Indian markets. The new entrants in the industry use such profiles without knowing its implications, which is a matter of great concern. When you buy Upvc windows, it is recommended to talk about this with your vender and have this clarified and assured that profiles he uses can withstand the High UV radiations. (Monsoon Proof (Water Tightness)

3 UPVC Door & Window Profile UPVC Window & Door Profiles Casement Outer Frame Casement Sash Casement T-Mullion 60 Door Sash - Outward Opening Track Sliding Frame with Mesh 2 Track Outer Frame Track Outer Frame Sliding Sash

4 UPVC Door & Window Profile Sliding Sash 75 Csmt. Single & Double Glass Bead Sliding Inter Lock for 75mm 44.5 Sliding Inter Lock for 55 mm Sliding Single Glass Bead Sliding Double Glass Bead Connector Plaps UPVC Window & Door System offer the most varied Style and designs. The Technical limitations of the past have been overcome and today our UPVC Window & Door can be fitted into any type of property from residential house and apartments to commercial buildings such as hotels, hospitals and modern office blocks Plaps high impact resistant profiles are built to last. A wide variety of profile offer many design possibilities to architects to create beautiful windows & Doors.

5 UPVC Window Shutters

6 UPVC Doors & Windows Hardware

7 UPVC Doors & Windows Hardware

8 UPVC Doors & Windows Hardware

9 UPVC Doors & Windows Hardware

10 UPVC Doors & Windows Hardware

11 UPVC Doors & Windows Hardware The Smart Window

12 UPVC Doors & Windows Hardware

13 UPVC Doors & Windows Hardware

14 Doors & Windows Glazing Glass should be selected on the basis of wind load, energy efficiency, climatic condition, sound attenuation, aesthetic, safety etc. Some of the glasses have been described below which can be used in Plaps windows: 1. Single Glazing 2. Double Glazing 3. Triple Glazing A. Float glass Standard flat, clear glass is normally used as window glass. B. Tinted glass Pigmented float glass is called Tinted Glass. These glasses typically absorb Solar radiation, keeping it cooler inside the building & protecting furnishings from fade. C. Reflective glass A metallic coating on float glass is reflective glass. Reflective glass has low Solar heart gain which cuts AC energy cost. It reflects light in the day time Ensuring minimal visibility from outside. D. Tempered glass They are three times stronger than normal float glass. When broken it Shatters into small sharp free pieces. Laminated glass Laminated glass (also called Shatter Proof Glass) combines two glasses Sheets sandwiched in one or more layers of PVB plastic or resin. This Makes the glass stronger & prevents easy breakage. These glasses have Enhanced sound insulation property.

15 Save Energy THE GREEN WINDOW WIN

16 PLAPS GOLD SPACER PROFILE Interesting and aesthetically pleasing new design for the leaded light system. For the manufacture of windows and doors; PLAPS GOLD aluminum profiles and connectors are the best option. This combination of gold colored profile and matching colored spacers opens new and creative possibilities. Material Aluminums alloys from the material series EN AW-3000ff as well as EN AW-1085 SURFACE Condition: Metal: Surface Style of execution and surface features: mill-finished Anodized Surface Style of execution and surface condition: highly finished eloxal in colors gold and silver. Coil-coated Surface Coating carried out using coil-coating process. Uniform quality of coating and color features is checked constantly. Thickness of layer in accordance with ECCA T1 [1995] Mirror finish in accordance with ECCA T2 [1995] Color uniformity in Lab Hunter in accordance with ECCA T3 [1995] Adhesion after ductility of coating films in accordance with ECCA T7 [1995] Cross-cut adhesion test in accordance with DIN Degree of cross linkage of varnish systems that can be chemically cross-linked (MEK) PLAPS Weiss Flexibility Can be bent into radius shapes. T e c h n i c a l d e t a i l s Silber Types of Packaging Packed in boxes 4 meters long. Special packaging and lengths available upon request. Bile Gold System Components / Joining Elements Joining elements are available for joining KPG 8 x 1.5 To one another to fulfill all current purposes and types of Application, as well as for edge connectors. Joining elements steel pin and cross end connector Old German

17 Roller Fly Screen Roller Screen is made of Spring Loaded mechanism With One Touch releasing feature and with anti bump brake system. The mesh used in roller system is of PHIFER better UVE from Brand PHIFER Incorporated USA World largest and premium manufactures of Fly Screens. Better View allows to retrieve 100% natural light, Fresh Air, & Improved Visibility. Washable, Fire retardant & lead free.

18 (IGU) Insulating Glass Insulating glass is made of two or more than two pieces of glass which there is a space with certain width is Partitioned by aluminum frame filled with highly efficient molecular absorbent between them. The edge of Insulating glass is sealed by high strength sealing sealants. To ensure the performance of IGU, double sealing Must be used. Butyl should be used for the first sealing polysulfide rubber or silicon structural sealants should be chosen according to glazing manner. Feature Thermal Performance: Heat insulation performance of IGU is the most ideal among all processed glass product Available on the market. Heat transfer coefficient k value can be effectively reduced by IGU. If inert gas as neon, argon, helium is filled, heat transfer coefficient can be further dramatically reduced. Sound Insulation Performance: IGU is ideal sound insulating material. Normal IGU can reduce noise by 30 Decibel, IGU filled with inert gas can further reduce 5 decibel. Anti dew under Low Temperature: As IGU is filled with enough desiccant, it can effectively absorb the vapor In the inner space or penetrated from outside to ensure the gas in inner space is absolutely dry and won t dew. Optical Performance: Various glass substrates can be used for IGU to meet the request sunlight transmission And reflection. Light Weight: under the same condition heat insulation. The replacement of partial brick wall or concrete with IGU can reduce load of building and simplify building structure. Types of Product Specification Clear glass, tinted glass, tempered glass, heat- Size: maximum2500mmx5000mm Reflective coated glass, Low-E Glass, laminated minium300mmx300mm Glass and color glazed glass can be composed Aluminum frame thickness: 6mm, 9mm Into various compound product. Flat or bent 12mm, 20mm. IGU can be processed. A Window System and the definition of the UW value UW = A1xuf+Agxug+Lfx AW Tempered glass heat soak treatment UW = Thermal transmittance coefficient of window Uf = Thermal transmittance coefficient of frame Ug = Thermal transmittance coefficient of glass Aw = Area of window Af = Area of frame Ag = Area of glass Lf = length of the edge of frame (space) = Liner thermal transmittance coefficient of edge system. Value means the energy losing while transit from the edge of Insulating glass. Much higher of the value means much Higher heat energy will be lost while transit from the insulating glass. The size of value mostly depends on material of spacer (Heat conductivity).

19 Laminated Glass Laminated glass is made of two or more than two pieces of glass which there is one layer or multi-layers of PVB with strong cohesion is sandwiched under high temperature and pressure between them. The Appearance and installation method of laminated glass sandwiched with transparent PVB film are the same With normal glass. But much more durable. Characteristics safety: Tenacity of PVB fairly good. It can quickly absorb and weaken a mass of striking energy when laminated glass Is attacked by outside force. Therefore, laminated glass is hard to be penetrated and can remain integrally in The frame even when it is broken. Therefore, laminated glass is the true safety glass. Sound Proof Performance: PVB can effectively prevent sound wave. Sound wave can be obviously weakened when it goes through laminated glass so that noise disturbance in office or living environment is reducing. anti-uv: Laminated glass can effectively prevent UV (as high as more than 99% of UV) which can Protect the valuable Furniture, exhibit, and artwork etc. from discoloring from UV. Security: Because it is not possible to cut laminated glass by glass cutter and it is time costing and loud sound would be Caused to penetrate laminated glass by other instrument, it is rather difficult to enter the house by cutting or Breaking laminated glass and it is easy to be discovered. Therefore, laminated glass has strong resistance function to evil destruction, robbery and violence. anti-bullet and anti-explosion: Multi-layer laminated glass can be made into various products of anti-bullet, anti-bombing and anti-explosion. Hurricane and earthquake resistance: Laminated glass s high persistent and strong cohesion enable the fragments remain in place, thus it is suitable For hurricane and earthquake zone. Application Due its unique features, laminated glass can be extensively used in building skylight, elevated floor, high grade Curtain wall, adn window, furniture, showcase and aquarium etc. Product clear and tinted laminated glass, coated, tempered, semi-tempered and bent laminated glass Specification Size: maximum 2500mmx7800mm; Bent laminated glass size depends on the size of bent glass. Substrate thickness: 3mm-19mm Film thickness: 0.38mm and multiple of 0.38mm Quality In accordance with national standard GB passed Chinese safety glass compute Usury certification (CCC) Passed Australia AS/NZS 2208:1996 Safety glazing materials in buildings.

20 Cautions when handling glass Window 1. Handle with care when moving glass & Windows. Case must be lifted, unloaded and placed strictly according to the This side up sings on the case. Packing case must not be stored outdoors. 2. When disassembling the window case, contact and hit on glass with case- disassembling tools must be avoided. In Particular, hitting on the corners of edges of glass with hard objects is forbidden strictly. 3. After receiving packed window, especially on construction sites, package should be opened as soon as possible and Glass should be moved and stored in a city and ventilated place. Glass should be placed at an angle of 5-7. One edge of glass should contact horizontal surface. The lower part of glass should be padded with object with low rigidity like lumber. When more than two pieces of glass are stocked, soft material between glass pieces in the original package must be used to separate each piece of glass. Direct surface contact of glass is strictly forbidden. 4. If drenched by rain or affected with clamp, glass can have hydrolysis reaction very quickly which cause phenomena such as white spots or rainbow on glass surface. Once glass is molded, it becomes very difficult to handle. 5. Because of the difference in the external expansion coefficient of glass and the upholder after installation. Enough gaps must be left between all four edges of glass and the installation slot, and soft contact between glass edges and the supporting frames must be made during installations process. 6. For no- tempered laminated glass (including bulletproof glass) and especially for bent laminated glass which are Made of more than three pieces of glass sheet, cracking edges often occur after installation due to their heavy weight and interactive compression. Therefore, it would be best that the area of each piece of glass is not exceeding 2m2 or semi-tempered glass is used. 7. When laminated glass is used outdoors, rain may cause PVB to absorb water if its edge section is exposed to atmosphere and result in glue breaking away. During installation, neutral silicon sealant or polysulfide sealant should be used to seal the edge section of laminated glass. No acid sealant or sealant with organic solution can be used. 8. After glass Installation, attention must be paid to prevent glass, especially the film surface of coated glass from corrosion by solder dregs. Concrete or silt water. Liquid with high alkalinity or acidity such as hydrochloric acid must not be used to clean the floor. Otherwise, the evaporated alkali or acid can cause perpetual damage to coated glass. 9. During the Installation and processing of coated glass, coating surface must not contact any hard object or upholder such ad table board. If glass or especially coating surface of glass is polluted, only Olean water, ethanol or xylems on soft cloth can be applied to scour glass. 10. Design and construction should conform to national corresponding standards.

21 Sound Insulation Performance for glass Sound Frequency A. 6mm Signal Glass 6mm B. 9.38mm(6mm/0.38/PVB/mm) laminated glass 9.38mm(6mm/0.38PVB/3mm) C. 24mm(6mm+12A+6mm)Insulating Glass 24mm(6mm+12A+6mm) D mm(9.38mm+12+6mm) laminated Insulating Glass 27.38mm (9.38mm+12+6mm)

22 53 V-weld is the technology of the future and Plaps Windows is proud to launch this innovation.this was designed and engineered for V-weld and we are excited to introduce this ground- breaking technology. V-weld basically eliminates the need for Box-to-Box construction, and mechanical mullions will soon be a thing of the past. Sinceall joints are welded together, there is no need for gaskets or silicone to seal the windows. The V- welded mullion virtually eliminates air and water leaks from combination windows. With av-weld, each window opening performs as an individual window even though V-weld windows are built in combination. V-welded windows are also easier to install comparativetesting with temperature variation ranging from -30ºC to 68ºC was conducted on windows with mechanical mullions and V-welded mullions. our most recently introduction of V-weld and we are excited to introduce this ground-breaking technology.