INTRODUCTION. For the Multilith Model 1250, Chute or Chain Delivery Patented US and Foreign. 10 x 15 T.M.

Transcription

1 igi IGI, LLC Automatic Numbering Perforating and Scoring Conversion Unit A BRIEFIGI INTRODUCTION For the Multilith Model 1250, 10 x 15 Chute or Chain Delivery Patented US and Foreign Image Graphics Industries, LLC T.M

2 The IGI Automatic N, P/S Attachment for the Multilith, Model 1250 Patented US and Foreign Numbering, perforating and scoring made easy. Why job the work out and wait, hand-feed it one sheet at a time, or pay thousands for a free-standing or pressattached unit? Let your old, reliable, low-cost Multi 1250 do the job for you with the IGI ANC UNIT. CONSIDER THE FOLLOWING: One-time installation (30 Minutes). Put it on; leave it on. Does not interfere with the normal use of the press for any other purpose. No moving parts (exclusive of those in numbering heads). There is virtually nothing to wear out; no mechanical replacement parts will be needed. Once installed, make-ready is just a matter of a minute or two (to position impression). Can pay for itself in no time. Time-tested under normal shop conditions to provide complete reliability on millions of impressions. The impression activator (see Components) enables you to put the press on or off impression in an instant, regardless of the orientation of the cylinders. Requires no storage space. No other numbering system currently on the market can match the combined features of original cost, operating cost, replacement part cost, speed and simplicity. Numbering heads trip only when paper is passing through the press, i.e., they do not trip when the press is idling. Will number, crash-number, perforate, or score anywhere on any sheet the press will feed (Allowing for gripper margin, of course). Far and away, the most reliable, lowestpriced automatic N, P/S system on the market. Complete unit includes: chase, mounting block-clamps, two numbering heads, inkers, combination perforating, scoring and slitting bar, assorted perforating and scoring rules, adhesive-backed perf and score packing (receivers), impression activator, cylinder adjustment scale, plastic box of accessories and complete instruction for use. Turns the Multi 1250 into a high-speed letterpress, utilizing time-tested letterpress equipment. Will feed stock with the acclaimed registration of the Multilith. No need for pre-inked pads inking system of press provides continuous supply and unlimited color choice. 1

3 Question: If your IGI unit is all that you say it is, why such a modest selling price? Answer: The IGI unit is not a numbering machine. It is an attachment that enables your exceptionally well engineered Multi 1250 to function also as a numbering, perforating, scoring and signature or logo imprint machine. In other words, you already own the horse, all you need now is the rider. We sell the rider. There is certainly no shortage of numbering, perforating and scoring machines on the market. SO WHY CHOOSE THE IGI SYSTEM? A few good reasons... PERFORMANCE for one. No other unit prints a better, a more professional number or makes a better perforation or score than the IGI unit, as the enclosed samples will readily attest. PRICE, for another. With your press, you already own 90% of the IGI System. Even one-sheet-at-time, hand-fed units cost almost twice as much as an IGI automatic, high-speed numbering unit. This advantage, however, is afforded only those who own a Multi 1250 (or an A. B. Dick press). An old Multi 1250 doesn t cost much. Yet, it will feed stock and register more accurately and reliably than N, P/S units that sell for $10, to $15, Check it out! 2

4 Components Numbering Chase mounted on Block Clamps A Block-Clamp on Shaft Locator Tape Cylinder Guard Impression Activator (Wheel) (IAW) 0 Standard No Head 1 2 Inker 3 Bimatic Numbering Head Accessory Box Unit in place 3

5 Numbering on the Multi 1250 with the IGI Automatic Numbering Conversion Unit (ANC Unit), The Synergy The IGI, Inc. Automatic Numbering, Perforating and Scoring Unit for the Multilith Model 1250 patented US & foreign How it works... Installation and Use Inker (inking pad) (A) takes ink from form rollers and tranfers it to characters on numbering head (B). Numbering head then simultaneously imprints stock and trips to next number as it makes contact with cyl-gd (C) on impression cylinder. This process repeats with each revolution of cylinders. IGI, Inc Chesapeake Blvd. Norfolk, VA Local Fax Inker (A) Numbering Head in Chase (B) Cylinder Guard (C) Your IGI Unit The Model 9540CD A center-driven unit; offers a choice, a plus, especially when crash-numbering carbonless sets. 4

6 Components... Metal-base Receiver Perforating & Scoring Perf & Score Packing Stripper Perforating, Scoring & Slitting Rules Adjustable Perf & Score Bar (Rear & Front View) Spacer him S S P/ Chase with Spacer in Place 5

7 How it works... WHEN INK IS NOT NEEDED Perforating and Scoring Combination Perforating and Scoring Bar in Chase (A) Packing (Receiver) on Cylinder (B) Marking cylinder where indicated by locator-sheet Apply Packing over Locator marks 6

8 A STRONG, RELIABLE SUPPORT SYSTEM REPLACEMENT PARTS AND SUPPLIES Perf and score packing, cylinder guards, inking pads etc. are readily available from IGI, Inc. They are packaged by the dozen (12 pack). A wide variety of perf and score rules, both 3-hole-punched (standard) and slotted, for the adjustable perf and score bar, are sold individually. All standard IGI numbering heads, ascending or descending, as well as center-driven heads have all characters ground to a radius to match that of the impression cylinder. (A standard feature provided by IGI, Inc. at no addition cost.) IGI, Inc. also repairs and modifies numbering machines. CUSTOM ADAPTATIONS IGI can customize numbering machines for special jobs. Static letter wheels before or after rotating numbering wheels. Skip heads skip 2, skip 3 etc. Heads with two wheels or ten wheels. Micr heads for checks, to your specifications. All the above as well as very small heads with 1/8 or 1/16 characters are easily accommodated by the IGI unit. The design of the Multilith with its reliable and accurate registration, with cylinders riding on solid, rather that spring-suspended shafts, is ideally suited for numbering, perforating and scoring. You will get clear, sharp, accurately registered impressions we guarantee it. LIMITED WARRANTY Your IGI, ANC Unit is guaranteed to outperform any other numbering unit currently on the market, regardless of price, freestanding or press-attached, by the following combined features: original cost, speed, simplicity, make-ready time, replacement-part-cost, and operating cost. This unit is guaranteed against defective workmanship and materials, it is also guaranteed to perform exactly as claimed when used as advised in Instructions for Use. This warranty applies only to the original purchaser and is in lieu of all other warranties expressed or implied. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. IGI, LLC