Völker furnishings. The complementary selection of furnishings for healthcare.

Transcription

1 Völker furnishings. The complementary selection of furnishings for healthcare.

2 Contents Introduction 03 Welcome MH solid wood program 04 ST 502 chair and ST 503 armchair 05 ST 504 high-back chair 05 S 519 high-back easy chair, S 519v recliner and H 509 footstool 06 S 550 armchair with HS 555 fitted cover 07 S 550 armchair A 980 aluminum program 08 AS 985 armchair, AS 987 armchair and AH 989 footstool 09 AST 980 chair and AST 981 armchair 10 T, TF, TS, TX and AT table program KM furniture program 12 Wardrobes, cabinets, chests of drawers and cupboards 13 Wall-mounted shelving, wall mirror and coat rack Technical data 14 MH solid wood program 16 A 980 aluminum program 18 Color selection 18 T, TF, TS, TX and AT table program 20 KM furniture program 2

3 A sense of well-being in a new environment. When physically disabled people and seniors move into a healthcare setting, they are confronted with a world of new experiences. They must accept the need for increased physical care, acclimate to a new daily routine and find their way around a completely new environment. The immediate surroundings of disabled people or seniors are determined by the requirements of daily care procedures. A healthcare bed must be functional, a bedside cabinet is more than just a storage space, and the surrounding furniture must accommodate their needs. Despite these practical considerations, caregivers need to take into account their residents individual tastes in order to provide contentment and satisfaction. Residents are aware of the difference between basic furniture and a comfortable, stylish, personalized furnishing design. Creating a comfortable and functional living environment for your residents enhances the quality of the workplace for nursing staff and allows healthcare facilities to be more competitive. We invite you to consider the feelings of your residents, who understand that their lifestyle might be changing but still desire to live with dignity and personal style. We can bring you into a world in which residents can enjoy a true sense of well-being. Heinrich Völker Chairman of the board 3

4 The 500 solid wood program. Völker ST 502 chairs and ST 503 Völker ST 502 chairs and ST 503 armchairs have been specifically developed for dining rooms and common areas in healthcare facilities and retirement residences. Völker ST 502s/ST 503s chairs and armchairs are the stacking versions of the standard chairs and armchairs. Illustration above: Arrangement with ST 502 chairs and ST 503 armchairs with TF 140/7 (front) and TF 82/7 (back) tables. The design of the legs guarantees the greatest possible stability against overturning. Rollers can be integrated into the front legs of all models in the 500 program to facilitate moving the chairs or pushing them to a table (optional). Illustration right: The ST 503 armchair shows that you can combine function with beauty. Völker ST 502s chairs and ST 503s armchairs can be stacked to save space. 4

5 500 program high-back chairs, easy chairs and recliners. The highest level of comfort and function. The ST 504 high-back chair The ST 504 high-back chair, providing additional support and comfort, is ideal for resident rooms and sitting areas of retirement apartments and healthcare facilities. The seat of all models has been ergonomically designed with a depth that ensures an ideal sitting position for the resident. In addition, the seat slopes gently toward the back, which prevents the user from slipping forward and reduces pressure on the upper leg. The S 519v recliner is a good example of the perfect synthesis of appearance and function. S 519 high-back easy chair and S 519v recliner 500 program chairs are complemented by these high-back easy chairs and two-seat sofas that are available with headrests and footstools. An additional item in the program is the S 519v adjustable reclining easy chair. As comfortable as they are functional, the 500 program chairs contribute to a homelike atmosphere in private rooms and common areas while maintaining the features that distinguish these chairs in their service to seniors. The backrest has a curved shape that fits the natural curvature of the spine, providing lumbar support. The back padding is removable for easy cleaning. With its sloping seat, the H 509 footstool makes an ideal leg rest and footrest, especially in combination with the S 519v recliner. With the seat in the horizontal position, the H 509 footstool can also be used as temporary seating for visitors. Illustration left above: Apartment with ST 504 high-back chair at TX 80/7 table, in the background the Völker 3080 MA healthcare bed. Illustration left below: Two S 519 easy chairs with coffee table. The same chair with headrest and H 509 footstool. 5

6 The new S 550 armchair with HS 555 fitted cover. The personal touch in room settings for seniors. The new S 550 armchair Völker S 550 armchairs look especially elegant with matching HS 555 fitted covers, and perfectly complement Völker 3080 MA and MB healthcare beds, which are also made of solid wood. The fitted covers are washable and consist of a main cover, which can be fitted quickly and easily, and a second protective cover that slides over the head area to prevent soiling. The basic cover consists of a single piece of material that is simply pulled over the arms and back of the armchair after snapping it below the removable seat cushion. This makes shifting impossible. Finally, the zipper at the back of the chair is closed, giving the cover a perfect fit. The fitted covers are made according to your wishes, with the design of the main cover matching that of the headrests. The design choices are limitless, with commercially available fabrics that can be matched to other furnishings in the room such as bedspreads, cushions and curtains. The use of solid wood makes the sculptured hand rests at the front of the arms ideal for support on all 500 program chairs. 6

7 Simply elegant, even without the fitted cover. The S 550 armchair. The S 550 armchair without fitted covers also offers a very attractive design choice. The fully padded chair sides give these armchairs a simple elegance that makes them especially appealing. The armrests of all models in the 500 solid wood program are specifically shaped for comfort and support. The front end of the armrest is scultptured to be easy to hold on to an extremely important detail for the security of those who use this chair. For this reason as well as to provide for the ideal fit of the chair covers the front end of the armrest remains exposed, even in the case of chairs with fitted covers. From the front view, the S 550 armchair demonstrates its solid construction and its stability from overturning, features that distinguish all other Völker seating, as well. The S 550 armchair, with or without covers, is available in the material of your choice. Select from a wide variety of fabrics or vinyl choices available from your local Völker representative. The side view of the S 550 armchair demonstrates its simple elegance, which is highlighted by the padding below the armrests. 7

8 Völker A 980 program. Ideal for use in hospital rooms equipped to clinical standards. Völker aluminum program chairs have been designed for the optimal comfort of users and visitors in a very specialized setting. In combination with Völker healthcare beds for critical care purposes and Völker med-surgical beds, the A 980 aluminum program represents the furniture of tomorrow. Völker makes this furniture available today. Völker AS 985: easy armchair, upholstered; with hand-rail (optional). Völker AS 987: easy armchair, fully upholstered with headrest and hand-rail (optional). AH 989 tilting footstool. Optional front-leg rollers make it very easy for caregivers to move occupied chairs. The A 980 program is distinguished by perfection to the very last detail (here sculptured wood armrest on AS 987 easy chair). 8

9 Völker AST 980: upholstered chair with hand-rail (optional). Völker AST 981: upholstered armchair with hand-rail (optional). We firmly believe that ideal seating for those not feeling well should be versatile enough to serve other purposes as well. Völker A 980 chairs and easy chairs are well suited for relaxed seating at small seminars or for rows of seats at larger events. Our A 980 program virtually eliminates restlessness on such occasions. Of course, A 980 program chairs and easy chairs can be stacked. Here, for example, four upholstered chairs with armrests and hand-rails. Illustration right above: Relaxed seminar seating, custom-made table. Illustration right below: Rows of seats with row connectors. 9

10 The Völker table program. The perfect complement to all Völker chairs and easy chairs. T table program Völker s line of tables has been designed to match healthcare furniture offered in the round profile design. Great attention has been paid to make both private and common areas in retirement residences and healthcare facilities as homelike as possible, without sacrificing durability and practicality. TF table program The rectangular and square tables of this series have been developed for private and common areas in retirement residences and healthcare facilities. The rectangular tables are particularly suitable for use dining room settings. Völker T 82/7 table Dimensions (L x W x H): 32 1 /4 x 32 1 /4 x 29 in. (82 x 82 x 74 cm) Völker TF 140/7 table Dimensions (L x W x H): 55 x 32 1 /4 x 29 in. (140 x 82 x 74 cm) 10 Other models available Dimensions (L x W x H): T 65/ /2 x 25 1 /2 x 15 3 /4 in. (65 x 65 x 40 cm) T 65/ /2 x 25 1 /2 x 25 1 /2 in. (65 x 65 x 65 cm) T 92/ /4 x 25 1 /2 x 25 1 /2 in. (92 x 65 x 65 cm) T 140/7 55 x 32 1 /4 x 29 in. (140 x 82 x 74 cm) T 180/ /4 x 32 1 /4 x 29 in. (180 x 82 x 74 cm) Other models available Dimensions (L x W x H): TF 82/ /4 x 32 1 /4 x 29 in (82 x 82 x 74 cm)

11 TS table program TX table program AT table program If you desire, we are happy to customize Tables in this series have been developed This elegant table series with either a This table series with a square or circular tables to your own specifications for use as single pieces of furniture in circular or square tabletop features a tabletop, supported by a central column common areas in retirement residences central column. As a larger rectangular or four aluminum profile legs, comple- and healthcare facilities. With circular or table, it is also suitable for use as a ments the Völker A 980 aluminum pro- square tabletops, they are also the ideal single piece of furniture in common areas gram (see p. 8). Although these tables complement to Völker chairs and easy in retirement residences and healthcare are highly suitable for use in rooms with chairs in apartments and private rooms. facilities. a more clinical function, they are also intended for use in common areas. Völker TS 80/7 Dimensions: ø 31 1 /2 in. (80 cm), Height: 29 in. (74 cm) Völker TX 80/7 Dimensions: ø 31 1 /2 in. (80 cm), Height: 29 in. (74 cm) Völker AT 80/7: table with central column Dimensions: ø 31 1 /2 in. (80 cm), Height: 29 in. (74 cm) Völker AT 82/7: table with aluminum legs Dimensions (L x W x H) 32 1 /4 x 32 1 /4 x 29 in. (82 x 82 x 74 cm) Other models available Dimensions (L x W x H): TS 80/6 ø 31 1 /2 in. (80 cm), H: 27 1 /8 in. (69 cm) TS 82/ /4 x 32 1 /4 x 29 in. (82 x 82 x 74 cm) TS 90/7 ø 35 3 /8 in. (90 cm), H: 29 in. (74 cm) TS 140/7 55 x 32 1 /4 x 29 in. (140 x 82 x 74 cm) TS 180/ /4 x 32 1 /4 x 29 in. (180 x 82 x 74 cm) Other models available Dimensions (L x W x H): TX 80/6 ø 31 1 /2 in. (80 cm), H: 27 1 /8 in. (69 cm) TX 82/ /4 x 32 1 /4 x 29 in. (82 x 82 x 74 cm) TX 90/7 ø 35 3 /8 in. (90 cm), H: 29 in. (74 cm) TX 140/7 55 x 32 1 /4 x 29 in. (140 x 82 x 74 cm) 11

12 Völker s KM program: designed to accommodate individual needs. K wardrobes The interior layout of the wardrobes KM cabinets and chests of drawers height 33 1 /2 in. (85 cm), depth 17 3 /4 in. Völker wardrobes are available in widths varies according to model (see chart). Völker cabinets and chests of drawers (45 cm.) of 19 3 /4, 31 1 /2, 39 1 /2, 47 1 /4 and 59 in. Other interior layouts are available for are available in three standard models: (50, 80, 100, 120 and 150 cm). They can all wardrobes. KM 108T cabinet with 2 doors or OS cupboards easily be combined with each other, A pullout shoe drawer is available for KM 108TS cabinet with 2 doors and 2 Völker cupboards are available with an providing for a full range of additional additional convenience. drawers. open front and one shelf (OS 107) or widths accommodating virtually any Top crowns can be added to finish the Dimensions: width 39 1 /2 in. (100 cm), with 2 doors (OS 107T) or 2 glass doors room dimension. Standard wardrobe wardrobe selection (available in sizes to height 33 1 /2 in. (85 cm), depth 17 3 /4 in. (OS 107GT), each also with one shelf. height is 78 3 /4 in. (200 cm) and the depth match individual cabinets or groupings (45 cm.) Dimensions: width 39 1 /2 in. (100 cm), is 22 3 /4 in. (58 cm). These wardrobes are of cabinets). The third version is the KM 78S chest height 25 1 /2 in. (65 cm), depth 13 3 /4 in. available in a laminate wood finish or of 4 drawers. (35 cm). solid wood veneer as an option. Dimensions: width 27 1 /2 in. (70 cm), 12 From left to right: K 100 wardrobe with top crown, OS 107 cupboard, KM 108T cabinet, OS 107GT cupboard, shelf, OS 107T cupboard, KM 108TS cabinet.

13 WR wall-mounted shelving unit wall mirror 51 1 /4 x 19 1 /4 in. (130 x 50 cm) Benefits at a glance: Screw-mounted 3 /8 in. (8 mm) back wall Shelving units are offered as the WR 58 with shelf (optional) and matching coat Solid metal spring-loaded hinges, Adjustable shelving with 2 shelves in a width of 39 1 /2 in. rack for an entrance area. opening angle 170 (wardrobes/ Solid metal arched handles that can be (100 cm) to match the KM 108T/TS cupboard), 110 (cabinets) easily grasped (ADA compliant) cabinets, and the WR 20 with one shelf in Customized shelving, shelf sides and Panels, doors and shelves in 3 /4 in. HPL crowns (wardrobes/cupboards) or a width of 27 1 /2 in. (70 cm) to match the base pieces in a variety of sizes are (19 mm) laminated resin-sealed chip- HPL-coated finishing sheet or solid KM 78S 4-drawer chest (see illustration). available upon request to complete your board (E1 quality), formaldehyde-free wood finish (cabinets/chests of drawers) project. Visible edges and edges to floor Casement bolt cylinder lock with trimmed with solid wood edge band or locking unit (optional) Wall mirror and coat rack plastic edging strip 6 /8 in. (2 mm) Compartment for valuables (optional) The following items are also available in Hidden exterior edges with veneer Drawers mounted on solid-metal the standard program: edge band or melamine coating guides with soft quiet roll wheels From left to right: WR 58 wall-mounted shelving unit, shelf, WR 20 wall-mounted shelving unit, KM 78S chest of drawers, floor shelving unit, wall mirror with shelf and coat rack. 13

14 Solid wood program Technical data Chairs, armchairs, high-back chairs, easy chairs, recliners, footstools and sofas in solid wood. Standard finishes natural or stained beech; other finishes available on request. Felt or plastic gliders, depending on flooring. Seats and backs padded and removable (depending on model). Integrated fluid-proof protection. Removable seat covers. Fabric designs as requested. Chairs and easy chairs in solid wood: upholstery in some models. Seat with fluid-proof protection. Removable seat covers. S 500 program: S 500 program easy chairs, recliners, footstools and sofas complement the ST 500 program. S 519v recliner fitted with infinitely adjustable gas-filled mechanism that assists the user in sitting up and leaving the chair. Reversible seat cushions. Recliner complemented by H 509 footstool which, with tilting seat, serves as ideal leg rest and footrest; when adjusted horizontal also usable as temporary seating for visitors. Recliner equipped with N 549 headrest, which is snapped into backrest. Headrest also available with S 519 easy chair and S 529 sofa (optional). S 550 easy chair optionally available with fitted cover (includes protective neck cover). [ N 549 ] Headrest Snaps into backrest of easy chair/sofa (standard with S 519v recliner). [ H 509 ] Footstool With tilting seat for leg rest and footrest. Model ST 502 chair ST 503 armchair Version Solid wood Solid wood Natural or stained beech x x Color according to Völker selection X X Color according to customer requirement X X Weight in lb. (kg) (7.8) (8.85) Dimensions in inches (cm) Width (49) (59) Depth (49) (49) Height (87) (87) Seat height (46) (46) Seat depth (43) (43) Material requirement in in. (cm) (80) (80) [width: in. (130 cm)] ST 500 program: Chairs, armchairs and high-back chairs combine high stability and light weight. Ergonomic seat depth ensures ideal sitting position. Backrest provides lumbar support by fitting the natural curvature of spine. Armrests shaped for comfort and support. Attractive top rail can be used for hanging handbags. Removable seat and back Benefits at a glance: High-quality solid wood High stability with light weight Greatest possible stability against overturning Ideal sitting position Ergonomic shaping of armrests Removable seat covers Detachable covers Integrated fluid-proof protection Chairs and high-back chairs in stacking version All models also available with front rollers Cover material Material group 1 x x Material group 2 X X Material group 3 X X Material group 4 X X Optional [ N ] Headrest [ R ] Rollers in front legs X X [ S ] Stacking X X [ H ] HS 555 Fitted covers Not available X Special version/equipment x Standard 14

15 ST 504 high-back chair S 519 easy chair S 519v recliner S 529 two-seat sofa S 550 easy chair with fitted covers H 509 footstool Solid wood Solid wood Solid wood Solid wood Solid wood Solid wood x x x x x x X X X X X X X X X X X X (10.95) (9.95) (25.6) (19.9) (13.35) (6.65) (60) (60) (63) (108) (60) (54) (64) (67) (64) (67) (66) (45) (99) (98) (122) (98) (97) (48) (46) (44) (45) (44) (46) (46) (47) (48) (47) (46) 53,25 (135) 51,25 (130) 90.5 (230) (260) ( ) for fitted covers (60) x x x x x x without fluid-proof protection X X X X X X X X X X X X X X X X X X X x X X X X X X Material group 1: Removable seat covers With fluid-proof protection Choice of patterns Material group 2: Non-removable seat covers Ambla or griffine Choice of patterns Material group 3: Non-removable seat covers Microcare Choice of patterns Material group 4: Choice of patterns Fluid-proof protection optional 15

16 Aluminum program Technical data Chairs, armchairs, easy chairs and footstools in Aluminum RAL Plastic gliders. Seat and backrest padding removable (depending on model). Integrated fluid-proof protection and removable seat covers. Cover designs by request. Chairs and easy chairs in aluminum: [ N ] Headrest Snaps into backrest of AS 987 armchair. [ AH 989 ] Footstool With tilting seat for leg rest and footrest. Benefits at a glance: High stability with light weight Greatest possible stability against overturning Ideal sitting position Ergonomic shaping of armrests Removable seat Removable seat covers Integrated fluid-proof protection Chairs and armchairs in stacking version Rollers in front legs (optional) Material group 1: Removable seat covers With fluid-proof foil Choice of patterns Material group 2: Non-removable seat covers Ambla or griffine Choice of patterns Material group 3: Non-removable seat covers Microcare Choice of patterns Material group 4: Choice of patterns Fluid-proof protection optional A 980 program: Chairs, armchairs easy chairs and footstools combine high stability with low weight. Ergonomic seat depth ensures ideal sitting position. Backrest provides lumbar support by fitting the natural curvature of spine. Armrests shaped for comfort and support. Seat with fluid-proof protection. Removable seat cover. See chart for additional equipment specifications. Not available X Special version/equipment x Standard 16

17 Model AST 980 chair AST 981 armchair AS 985 easy armchair AS 987 easy armchair AH 989 footstool Padding Padding Padding fully padded Version Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum RAL 9006 x x x x x Weight in lb. (kg) (8.7) (9.2) (11.65) (14.0) (6.95) Dimensions in inches (cm) Width (52) (62) (64) (64) (52) Depth (61) (61) (68) (68) (50) Height (87) (87) (91) (91) (43) Seat height (45) (45) (45) (45) Seat depth (42) (42) (47) (47) Material requirement in in. (cm) (125) (125) (135) 53.15(135) (60) [width: 55.1 in. (130 cm)] Cover material Material group 1 x x x x x without fluid-proof protection Material group 2 X X X X X Material group 3 X X X X X Material group 4 X X X X X Optional [ AR ] Removable backrest cover X [ B ] Hand-rail on backrest X X X X [ N ] Headrest X [ R ] Rollers in front legs X X X X [ S ] Stacking x x x x [ V ] Row connectors X X X X 17

18 Völker Color selection Wood and Deco-Fantasia laminates: The laminate finishes for all Völker healthcare beds are scratch, impact and friction resistant, as well as impervious to common chemicals. All laminates are manufactured in accordance with DIN (Emission Class E1)/DIN EN 438. If required, all surfaces are available in veneer and solid wood finish as an option. Natural Beech Stained Beech Table programs Technical data The tabletops of Völker s T, TF, TS, TX and AT programs are in laminate beech wood finish, stained or natural, or solid wood veneer as an option. Other finishes on request. Supporting frame in solid or laminated wood according to model. Supporting frames of AT aluminum program in aluminum, color RAL 9006 as standard. Table selection: TX program: Circular, square and rectangular tabletops with central column in laminated wood. AT program: Circular tabletops with central column and square tabletops with aluminum profile legs. Benefits at a glance: High-quality wood or selected woods Tabletop thickness 1 in. (25 mm) Veneered tabletops with 0.19 in. (5 mm) solid wood edge band Laminated tabletops with 0.07 in. (2 mm) ABS edging strip Plastic gliders standard, felt or metal gliders optional Golden Alder Natural Oak Rustic Oak Fine Cherrywood Mahogany Royal Maple Wendy Creme T program: Square and rectangular tabletops with legs in round profile design. TF program: Square and rectangular tabletops with legs in laminated wood. Fine Light Anthracite Pagami Blue TS program: Circular, square and rectangular tabletops with central column in solid wood. 18

19 Leg type T round profile wood TF laminated wood TS pedestal table (solid wood) TX pedestal table (laminated wood) AT aluminum Tabletop circular diameter x height in inches (cm) x (80 x 69) TS 80/6 TX 80/ x (80 x 74) TS 80/7 (see illustration) TX 80/7 (see illustration) AT 80/7 (see illustration) x (90 x 74) TS 90/7 TX 90/7 Tabletop square L x W x H in inches (cm) x x (65 x 65 x 40) T 65/ x x (65 x 65 x 65) T 65/ x x (82 x 82 x 74) T 82/7 (see illustration) TF 82/7 TS 82/7 TX 82/7 AT 82/7 (see illustration p. 18) Tabletop rectangular L x W x H in inches (cm) x x (92 x 65 x 65) T 92/ x x (140 x 82 x 74) T 140/7 TF 140/7 (see illustration) TS 140/7 TX 140/ x x (180 x 82 x 74) T 180/7 TS 180/7 Dimensions according to customer requirements X X X X X Version Solid beech natural or stained X X X X X Laminate beech natural or stained x x x x x Veneer color by request X X X X X Laminate finish by request X X X X X Color by request X X X X X 19

20 Storage furniture Technical data OS cupboards: Available open, closed or with glass doors according to model or by request. Chests of drawers, cabinets, wardrobes, wardrobe decks, cupboards, wall-mounted shelving units, wall mirror and coat rack in laminate beech, natural or stained; other finishes available on request. Veneer finish available (optional). Chests of drawers and cabinets can also be supplied with solid wood tops (optional). Interior specifications of cupboards depends on model (see chart). Variations possible on request. In case of volume orders, almost all models are available in special sizes. Built-in cupboards and wall-mounted shelving units can be made to suit specific room sizes. Storage furniture selection: K wardrobes: For interior specifications, see chart or by request. Available with optional shoe drawer, lockable compartment for valuables, top crown, frame doors and wardrobe deck. WR wall-mounted shelving units: Wall-mounted shelving units with 1 or 2 shelves in various sizes according to model or by request. Wall mirror and coat-rack: Wall mirror available with or without shelf. Coat rack with 3 hooks. Other configurations by request. Benefits at a glance: Solid metal spring-loaded hinges, opening angle 170 (wardrobes/cupboard), 110 (cabinets) Panels, doors and shelves in 0.75 in. (19 mm) laminated resin-sealed chipboard (E1 quality), formaldehyde-free Visible edges and edges to floor trimmed with solid wood edge band or plastic edging strip 0.07 in. (2 mm) Hidden exterior edges with veneer edge band or melamine coating Screw-mounted in. (8 mm) back wall Adjustable shelving Solid metal arched handles that can be easily grasped (ADA compliant) HPL crowns (wardrobes/cupboards) or HPLcoated finishing sheet or solid wood finish (cabinets/chests of drawers) Casement bolt cylinder lock with locking unit (optional) Drawer for valuables (optional) Drawers mounted on solid-metal guides with soft quiet roll wheels Base board cutout KM cabinets and chests of drawers: Fitted with drawers, doors or combination of each according to model or by request. Available with optional solid wood tops and locks. 20

21 Model K 50 K 80 K 100 K 120 K 150 Version 1 door 2 doors 2 doors 3 doors 3 doors Color of wood Natural or stained beech laminate x x x x x Veneer according to Völker selection X X X X X Laminate finish according to Völker selection X X X X X Color according to customer requirement X X X X X Dimensions in inches (cm) Width (50) (80) (100) (120) (150) Height (200) (200) (200) (200) (200) Depth (58) (58) (58) (58) (58) Configuration of wardrobe 1/3 folded wear and 2/3 hanging garments x x x x 5 adjustable shelves x X X X X Clothing rail with 2 adjustable shelves X X X X X Configuration according to customer requirement X X X X X Additional equipment [ S ] Shoe drawer X X X X X [ WF ] Compartment for valuables X X X X X [ SB ] Locking X X X X X [ KR ] Crown X X X X X [ R ] Framed doors X X X X X [ KO ] Wardrobe deck X X X X X [H: 15 3 /4 in. (40 cm)] Custom-made wardrobe configurations are also possible. Just ask us! Not available X Special version/equipment x Standard 21

22 Model KM 78S KM 108T KM 108TS OS 107 OS 107T Version 4 drawers 2 doors 2 drawers and 2 doors 1 adjustable shelf 2 doors Color of wood Natural or stained beech laminate x x x x x Veneer according to Völker selection X X X X X Laminate finish according to Völker selection X X X X X Color according to customer requirement X X X X X Dimensions in inches (cm) Width (70) (100) (100) (100) (100) Height (85) (85) (85) (65) (65) Depth (45) (45) (45) (35) (35) Additional equipment [ SB ] Locking X X X X [ M ] Solid wood top board X X X with storage space Custom-made chests of drawers etc. are also possible. Just ask us! Not available X Special version/equipment x Standard 22

23 Model OS 107GT WR 20 WR 58 Wall mirror Coat rack Version 2 glass doors 1 shelf 2 shelves with 3 clothes hooks Color of wood Natural or stained beech laminate x x x x x Veneer according to Völker selection X X X X X Laminate finish according to Völker selection X X X X X Color according to customer requirement X X X X X Dimensions in inches (cm) Width (100) (70) (100) (50) (50) Height (65) 7.87 (20) (58) (130) (130) Depth (35) 8.66 (22) 8.66 (22) Optional [ SB ] Locking [ M ] Solid wood top board with storage space X 23

24 Völker AG Wullener Feld Witten/Germany Phone Fax ProSell! D/APF5842e The illustrations also show some nonstandard equipment and accessories. All rights reserved. Subject to alteration without notice. Deviations from standards relating to individual countries, (guarantee conditions, for example) have not necessarily been taken into account. Disclaimer: While every effort has been made to ensure completeness and accuracy, no responsibility whatsoever is taken for possible errors and omissions.