DANIELI AUTOMATION DIGIMET CONFERENCE BUTTRIO, ITALY 29 SEPTEMBER 2016 GENERAL PROGRAM. 09:00 09:30 Plenary session Welcome speech
|
|
- Sharyl Rich
- 6 years ago
- Views:
Transcription
1 1 DANIELI AUTOMATION BUTTRIO, ITALY 29 SEPTEMBER 2016 GENERAL PROGRAM 09:00 09:30 Plenary session Welcome speech 09:30 10:30 Technical sessions 1, 2 & 3 10:45 12:45 Technical sessions 1, 2 & 3 14:15 16:15 Technical sessions 1, 2 & 3 16:30 17:30 Technical sessions 1, 2 & 3 17:30 18:00 Final Plenary Session
2 2 TECHNICAL SESSION 1 09:30 10:00 Adaptive EAF process control based on a data-driven approach: state of the art and future challenges Piazza M., Onesti D. 10:00 10:30 The electrode regulator system: advanced control architecture and innovative condition monitoring Onesti D. 10:45 11:15 Innovation of the technological packages for the control of the continuous casting machine Busolini L. 11:15 11:45 From the process control to the simulation of microstructure: prediction of the microstructural characteristics of solidification to downstream treatments Cestari L., Polo A. 11:45 12:15 On the evolution possibilities of the mixing model in the continuous casting machine Cestari L. 12:15 12:45 Open Innovation for the control of thermal processes Garassino D. 14:15 14:45 Model Predictive Control applied to thickness control on tandem mills for realisation of flat metal sheet: a unified platform where Level 1 fast control loops are integrated with Level 2 slow control loops Cuzzola F. A., Aurora C. 14:45 15:15 Cold/hot plate levellers as an example of automation & mechanical & sensor process co-design technological challenge: the next market competition Cuzzola F. A., Aurora C. 15:15 15:45 Advanced online algorithm for the flat rolling: - On line estimation of dynamic system in the form - Design an algorithm to interpolate sparse data Olivotto M., Martinis S. 15:45 16:15 Advances in hot rolling models: - improvements of rolling models for thick products - prediction of ski-up and ski-down in plate mills - improvement of the deflection model for the profile and flatness package - study of the hot strength resistance to deformation for nonferrous materials Mazza S.
3 3 16:30 17:00 Plan View Rolling: study of the effect of reductions in thickness and width on the final rectangularity of plates Mazza S. 17:00 17:30 Development of algorithm for the statistical analysis for the long term behaviour of process variables and their impact on the final product quality Polo A., Nadalutti P.
4 4 TECHNICAL SESSION 2 09:30 10:00 Electric arc model and control for billet welders: modeling of dispersions and inverter powering Venuti A., Mestroni A. 10:00 10:30 Analysis, modelling and control of the interstand tension based on motor torque in long products rolling mills to be confirmed 10:45 11:15 Rolling and quenching of long products: implementation of a numerical model for the real-time control Giacomini A. 11:15 11:45 Data mining techniques for the predictive maintenance: some applications involving the analysis of the product quality Polo A., Nadalutti P. 11:45 12:15 Q3MET: from Manufacturing Execution to Manufacturing Optimization Armellini D, Ponton C. 12:15 12:45 From the PC to the Mobile to augmented reality Canzian P. 14:15 14:45 Asset identification and localization in the metals industry Merluzzi A. 14:45 15:15 Safety improvements in the metals industry: personnel real-time localization Merluzzi A. 15:15 15:45 Power System products - industrial applications, static convertion systems for induction heating: technological evolution, R&D hints and future trends 15:45 16:15 Large industrial power systems in MT: load identification, self tuning, self diagnostics and advanced sensorless control functions 16:30 17:00 Induction heating systems: use in combination with traditional gaspowered systems and hot charge products to increase the energy saving 17:00 17:30 Study of indicators and development of a tools for the design of new plants and review of existing ones for the increment of energy efficiency. Michelutti M.
5 5 TECHNICAL SESSION 3 09:30 10:00 Automatic scrap yards and coil yards Ros F. 10:00 10:30 Evaluation of the scrap quality Giacomini A. 10:45 11:15 Stereo artificial vision (3D) and structured light for classification of objects and their volume 11:15 11:45 Actual and future application of the 2D artificial vision 11:45 12:15 Evolution of control systems for the Electric Arc Furnace Piazza M. 12:15 12:45 Evolution of control systems for the continuous caster - Use of Bragg's lattice fibre optic for the monitoring of temperature in the mould - Microwave technology for the detection of powder and steel level in the mould - Artificial vision for tracking of the material to be confirmed 14:15 14:45 Design and optimization of electromagnetic sensors for the on line dimensional and process control. On line measurement of grain size in steel strips during production Lugnan A. 14:45 15:15 Design and development of image sensors for measuring purpose with laser sectioning techniques Fadone V. 15:15 15:45 Modelling and optimization of ionizing radiation-based system for the measurement of aluminium strips and foils Lugnan A. 15:45 16:15 Assisted guidance and artificial vision algorithms for robotics 16:30 17:00 Strategies and algorithms for the self-adaption and optimization of trajectories in front of changes in the operating environment Dynamic management of safe areas during the operator-robot interaction Ardesi A.
MiDA 4.0 ENDLESS CASTING AND ROLLING EMPOWERED BY DIGITAL TECHNOLOGIES
OMAR NARDUZZI DANIELI GROUP 2018 SEAISI CONFERENCE & EXHIBITION 25-28 JUNE 2018 JAKARTA MiDA 4.0 ENDLESS CASTING AND ROLLING EMPOWERED BY DIGITAL TECHNOLOGIES DANIELI / SINCE 1914 PASSION TO INNOVATE AND
More informationABB Interstand Dimension Control, IDC Improved Tolerances in Profile Mills
ABB Interstand Dimension Control, IDC Improved Tolerances in Profile Mills Mats G Olsson ABB Automation Technologies AB Metals and Mining Vasteras, SWEDEN Tel.: +46 21 340000 E-mail: mats.g.olsson@se.abb.com
More informationDANIELI TECHNOLOGICAL PACKAGES LIFE CYCLE PARTNER FOR SLAB CASTER INDUSTRY*
DANIELI TECHNOLOGICAL PACKAGES LIFE CYCLE PARTNER FOR SLAB CASTER INDUSTRY* Maurizio Massimo¹ Mike Knights² Abstract Danieli developed the 3Q suite of process control technologies to address three critical
More informationRONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as:
1 2 RONDAL Based on many years of experience, we provide our buyers with a wide range of high-quality stamped and sawn slugs from pure aluminium and aluminium alloys. Different dimensions and shapes with
More informationSTEEL MILL MACHINERY
STEEL MILL MACHINERY WHO WE ARE TCT was found in 2009 by a group of experienced engineers with the vision to supply first class machines to the steel industry for reasonable prices and to offer parts and
More informationImprovement of thickness tolerances for a two-stand aluminum cold rolling mill
Improvement of thickness tolerances for a two-stand aluminum cold rolling mill The implementation of additional control loops to compensate backup roll eccentricity and harmonic hardness variation allows
More informationVKI3. Inductive strip edge position control for rolling mills. single-side robust maintenance-free
VKI3 Inductive strip edge position control for rolling mills single-side robust maintenance-free VKI3 Strip edge position control of metal str Operating principle: In advanced rolling mills, knowledge
More informationProfiling press braking CNC MACHINING FABRICATION FINISHING
Profiling press braking CNC MACHINING FABRICATION FINISHING +44 (0)114 321 6303 enquiries@dnametalwork.com www.dnametalwork.com Profiling Bevel Capability up to 45 LASER cutting PLASMA cutting WATERJET
More informationMEASURING SYSTEMS FOR THE STEEL INDUSTRY
EN MEASURING SYSTEMS FOR THE STEEL INDUSTRY WORLDWIDE, MORE THAN 200 LAP SYSTEMS ARE SUCCESSFULLY IN USE LAP MEASUREMENT ENGINEERING FOR THE STEEL INDUSTRY For more than 20 years, LAP systems have been
More informationX-Shape Precise flatness measurement and control
X-Shape Precise flatness measurement and control X-SHAPE Precise X-Shape flatness measuring system with measuring rollers of the latest generation. Challenge In addition to constant strip thickness, the
More informationTHE DRIVING FORCE BEHIND THE FOURTH INDUSTRIAL REVOLUTION
TECNALIA INDUSTRY AND TRANSPORT INDUSTRY 4.0 THE DRIVING FORCE BEHIND THE FOURTH INDUSTRIAL REVOLUTION www.tecnalia.com INDUSTRY 4.0 A SMART SOLUTION THE DRIVING FORCE BEHINDTHE FOURTH INDUSTRIAL REVOLUTION
More informationImproving Product Quality with Advanced Hot Width Measurement and Automatic Width Control in Hot Strip Mill of Bokaro Steel Plant
Improving Product Quality with Advanced Hot Width Measurement and Automatic Width Control in Hot Strip Mill of Bokaro Steel Plant S.Sarkar Instrumentation & Automation, Bokaro Steel Plant, Steel Authority
More informationStrip straighteners. Strip spectrum The following coil strips can be processed using our straightening
STRIP STRAIGHTENERS Strip straighteners SOPREM Precision Straighteners ensure your product quality. Distorted metal components are a thing of the past; today quality products are processed regardless of
More informationSMI. Strip Measurement Inductive. maintenance-free self regulating reliable
SMI Strip Measurement Inductive maintenance-free self regulating reliable SMI Strip Measurement Inductive Operating principle: The inductive strip centre sensor SMI (Strip Measurement Inductive) is based
More informationIn-line measurements of rolling stock macro-geometry
Optical measuring systems for plate mills Advances in camera technology have enabled a significant enhancement of dimensional measurements in plate mills. Slabs and as-rolled and cut-to-size plates can
More informationDas virtuelle Walzwerk Weg zum Cyber-Physical System
TECHNOLOGY FOR FUTURE CONCEPTS Das virtuelle Walzwerk Weg zum Cyber-Physical System Dr. Maksim Klinkov Outline (1) Achenbach Buschhütten a family company (2) Rolling mill - challenges in optimization (3)
More informationAssure best processing and product quality with the world s first In-line 3D Measuring Plate Inspection
Saving Costs at Inspection, Analysis and Repair of Hot and Cold Heavy Plates Assure best processing and product quality with the world s first In-line 3D Measuring Plate Inspection Aachen,. ISRA VISION
More information16. Sensors 217. eye hand control. br-er16-01e.cdr
16. Sensors 16. Sensors 217 The welding process is exposed to disturbances like misalignment of workpiece, inaccurate preparation, machine and device tolerances, and proess disturbances, Figure 16.1. sensor
More informationFRÖHLING INSIGHT.
03.2018 FRÖHLING INSIGHT www.danieli-froehling.de 2 DANIELI Fröhling WAELZHOLZ NEW MATERIAL ORDERS COLD REVERSING MILL AND TWO FINISHING LINES O n November 23, 2017, Waelzholz New Material Co., Ltd, awarded
More informationInternational Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications
1 2 International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications Joachim Gundlach, Jörg Detering Contents 3 Company Information
More informationIMPROVED AGC CONTROL IN COLD ROLLING USING LEARNING TECHNOLOGY. Gunnar BENGTSSON First Control Systems AB, Ängsgärdg. 4, S Västerås, Sweden
IMPROVED AGC CONTROL IN COLD ROLLING USING LEARNING TECHNOLOGY. Gunnar BENGTSSON First Control Systems AB, Ängsgärdg. 4, S-72130 Västerås, Sweden Summary. In this paper we will describe some substantial
More informationVIRTUAL PROTOTYPING APPROACH FOR THE DESIGN OF DIECAST FURNITURE COMPONENTS
VIRTUAL PROTOTYPING APPROACH FOR THE DESIGN OF DIECAST FURNITURE COMPONENTS Carlo Magistretti - B&B Italia S.p.A. Noverdate, Italy Nicola Gramegna - EnginSoft s.r.l. Padova, Italy ABSTRACT B&B ITALIA is
More information-Vivaldi. Innovative strip centre measurement in high temperature ranges
-Vivaldi Innovative strip centre measurement in high temperature ranges measuring through gas-tight furnace wall higher accuracy and operating security maintenance-free / no installations inside the furnace
More informationCasting Processes. ver. 2
Casting Processes ver. 2 1 Types of Parts Made Engine blocks Pipes Jewelry Fire hydrants 2 Complex, 3-D shapes Near net shape Low scrap Relatively quick process Intricate shapes Large hollow shapes No
More informationAutomatic gauge control (AGC)/
54 Technical Article Optimizing Strip Speed Measurement for AGC/Mass Flow and Elongation Control With Laser Surface Velocimeters Authors Leading manufacturers are constantly seeking out ways to increase
More informationHydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete
Date and Day Pre stressed UNIVERSITY COLLEGE OF ENGINEERING (Autonomous) OSMANIA UNIVERSITY M. E. (Civil) ( & ) and IV-Semester () Main Examination September 2012 EXAMINATION TIME TABLE Structural Prestressed
More informationLEADERS IN STEEL DISTRIBUTION AND VALUE-ADDED PROCESSING WORLD CLASS PROCESSING FACILITIES
LEADERS IN STEEL DISTRIBUTION AND VALUE-ADDED PROCESSING Established in 1921, Horan Steel is a privately owned company that has an excellent reputation as an extremely reliable, robust and well established
More informationInstrumentation, Controls, and Automation - Program 68
Instrumentation, Controls, and Automation - Program 68 Program Description Program Overview Utilities need to improve the capability to detect damage to plant equipment while preserving the focus of skilled
More informationDescription of Potential Errors in Laser Thickness Measurement Systems
Description of Potential Errors in Laser Thickness Measurement Systems Advanced Gauging Technologies, L.L.C. Scott A. Cook, President & C.E.O. October 7, 2016 Introduction Since 1998, Advanced Gauging
More informationDevelopment of hot-engraved letter reading device using a two-dimensional laser distance meter KYOSUKE SATO *
Development of hot-engraved letter reading device using a two-dimensional laser distance meter BY KYOSUKE SATO * SYNOPSIS: We have developed a technique which can read engraved letters for controlling
More informationDevelopment and capabilities of X-JET air knives, the new generation of Danieli-Kohler air wiping equipment
Fabio Vecchiet, Research & Development Center - DANIELI Wean United Development and capabilities of X-JET air knives, the new generation of Danieli-Kohler air wiping equipment Why to develop a new air
More informationMillmate Thickness Gauging Systems. New technology for precise strip gauging
Millmate Thickness Gauging Systems New technology for precise strip gauging by Sten Linder & Janne Mattila Reprint from MPT December 21 The new gauge New technology for precise strip gauging Sten Linder
More informationAfter continuous casting, the cast products are cut
Flexible deburring grinding solutions for slabs, blooms and billets for continuous production BRAUN has developed a cast product deburring grinding solution, based on its well-proven HP (high-pressure/high-performance)
More informationADVANCES IN NON-CONTACT LENGTH AND SPEED MEASUREMENTS WITH ZERO SPEED AND AUTOMATIC DIRECTION DETECTION FOR PROCESS AUTOMATION 1
ADVANCES IN NON-CONTACT LENGTH AND SPEED MEASUREMENTS WITH ZERO SPEED AND AUTOMATIC DIRECTION DETECTION FOR PROCESS AUTOMATION 1 Les Jenson 2 Engineering Manager Beta LaserMike Key words: Length & Speed
More informationApplied Electromagnetics M (Prof. A. Cristofolini) Applied Measurements for Power Systems M (Prof. L. Peretto)
Applied Electromagnetics M (Prof. A. Cristofolini) The course explores some aspects of interest in the field of electromagnetism of electrical engineering and provides students with the fundamentals of
More informationPRECISELY CONTROLLED STRIP TENSION. The key to success in innovative production processes PERFECT STRIP FLATNESS TOP-QUALITY SURFACE
PERFECT STRIP FLATNESS TOP-QUALITY SURFACE STRAIGHT-EDGE COILS HIGH YIELD PRECISELY CONTROLLED STRIP TENSION The key to success in innovative production processes UMLAUF-BRIDLES increase and decrease strip
More informationISA Series. resistance welding. Mid-Frequency Inverter Resistance Welding Control
resistance welding ISA Series Mid-Frequency Inverter Resistance Welding Control 500, 1000, 2000 & 4000 Amp Primary Output Five Feedback Modes Built-in Current, Voltage, Power and Time monitor Pre-weld
More informationQ-VID: a revolutionary approach to vision-based measurements and control
Q-VID: a revolutionary approach to vision-based measurements and control Ingrid Visentini 1, Riccardo M. G. Ferrari 1, Alessandro Ardesi 1 1 Danieli Automation SpA Via B. Stringher 4, 33042Buttrio (UD),
More informationComputer Numeric Control
Computer Numeric Control TA202A 2017-18(2 nd ) Semester Prof. J. Ramkumar Department of Mechanical Engineering IIT Kanpur Computer Numeric Control A system in which actions are controlled by the direct
More informationPractical Use of the Accuraspray Plume Sensor
Practical Use of the Accuraspray Plume Sensor Sauer Engineering www.sauerengineering.com John P. Sauer jopsauer@fuse.net 513-290-3617 Accuraspray Usage in a Quick Summary Accuraspray must be considered
More informationGF Machining Solutions Speed of Development : The Future of Machine Building. Sergei Schurov 23/06/2016
GF Machining Solutions Speed of Development : The Future of Machine Building Sergei Schurov 23/06/2016 Heritage Innovation Outlook Machine Tools Industry: Journey Through the Time Heritage Swiss Trains
More informationMeasurement & Analytics Measurement made easy. Stressometer Systems Solid measuring rolls for every application
Measurement & Analytics Measurement made easy Stressometer Systems Solid measuring rolls for every application Stressometer Systems The measuring roll family The Stressometer family of solid flatness measuring
More informationDevelopment of Robotic Machine Tool Towards Industrial Business. Huapeng Wu, Heikki Handroos Lappeenranta University of Technology
Development of Robotic Machine Tool Towards Industrial Business Huapeng Wu, Heikki Handroos Lappeenranta University of Technology 1. Background Since 2000, the EFDA in EU has launched several tasks to
More informationRota-Sonde DC4500. Smart display with Signal level. Easy alignment with Laser Line. Design for the most difficult applications
Scanning HOT METAL DETECTOR Rota-Sonde DC4500 Smart display with Signal level Easy alignment with Laser Line Design for the most difficult applications Very High Sensitivity 360 F Lt 1445 1 Applications
More informationInstallation Manual. Arc Chamber
Installation Manual Arc Chamber Installation Manual Introduction Administrative data Issue number: 6082940 G01 01 Date of issue: 25-03-2013 2 Arc Chamber Installation Manual 6082940 G01 01 March 25th 2013
More informationTRAFTOR WINDINGS CHANGING THE RULES TOROIDAL INDUCTORS & TRANSFORMERS SOLUTIONS PROVIDER AND MANUFACTURER
TRAFTOR WINDINGS CHANGING THE RULES TOROIDAL INDUCTORS & TRANSFORMERS SOLUTIONS PROVIDER AND MANUFACTURER PRODUCT RANGE POWER INDUCTORS Toroidal technology, driven by 20 years of R&D. POWER TRANSFORMERS
More informationCOMPUTER SCIENCE AND ENGINEERING
COMPUTER SCIENCE AND ENGINEERING Internet of Thing Cloud Computing Big Data Analytics Network Security Distributed System Image Processing Data Science Business Intelligence Wireless Sensor Network Artificial
More informationPrecise hardening with high power diode lasers using beam shaping mirror optics
Precise hardening with high power diode lasers using beam shaping mirror optics Steffen Bonss, Marko Seifert, Berndt Brenner, Eckhard Beyer Fraunhofer IWS, Winterbergstrasse 28, D-01277 Dresden, Germany
More informationChapter 2 High Speed Machining
Chapter 2 High Speed Machining 1 WHAT IS HIGH SPEED MACHINING (HSM)??? Low Speed High Speed 2 Defined as the use of higher spindle speeds and axis feed rates to achieve high material removal rates without
More informationFundamentals of Industrial Control
Fundamentals of Industrial Control 2nd Edition D. A. Coggan, Editor Practical Guides for Measurement and Control Preface ix Contributors xi Chapter 1 Sensors 1 Applications of Instrumentation 1 Introduction
More informationPRESSURE DISTRIBUTION AND SURFACE QUALITY DURING FORMING OF THERMOPLASTIC COMPOSITES WITH A COLLECTION OF RUBBER PARTICLES AS MOULD HALF
PRESSURE DISTRIBUTION AND SURFACE QUALITY DURING FORMING OF THERMOPLASTIC COMPOSITES WITH A COLLECTION OF RUBBER PARTICLES AS MOULD HALF V.Antonelli 12, R. Carbone 3, S. Lindstedt 4, R. Marissen 5 1 Delft
More informationNew generation of welding and inspection systems
New generation of welding and inspection systems Throughout the pipeline industry, and particularly in offshore and spool base production, welding requirements are shifting toward higher quality, greater
More informationCorus Process Engineering (CPE) is heavily involved
Mould plate coatings for the 21st century The ceramic coating of slab caster moulds is realising significant benefits in terms of mould life, cast product shape and caster operating costs. It is now standard
More informationRotary sizing of tube and pipe on the mill
Rotary sizing of tube and pipe on the mill By Bruce Chidlow, Kusakabe Electric & Machinery Co Ltd, Kobe, Japan Introduction The sizing methods used on tube and pipe mills have not changed significantly
More informationIdentification model of analog proximity sensor for a robot
Metal International Journal of Latest Engineering Research and Applications (IJLERA) ISSN: 2455-7137 Identification model of analog proximity sensor for a robot Hoai Nguyen Department of Mechanical Engineering,
More informationOPTICAL MEASURING SYSTEMS BASED ON CAMERA CLUSTER SYSTEMS JÖRG BUSCH* AND JANUSZ BLONSKI*
OPTICAL MEASURING SYSTEMS BASED ON CAMERA CLUSTER SYSTEMS BY JÖRG BUSCH* AND JANUSZ BLONSKI* SYNOPSIS One prerequisite to achieve higher product quality in high-speed production processes is use of new
More informationBIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN
OSMANIA UNIVERSITY, HYDERABAD - 7 M. E. (BME) (Main) Examination, September 2013 EXAMINATION TIME TABLE Time : 2.00 PM to 5.00 PM Department of BME Date & Day BIOMEDICAL ELECTRONICS II - SEMESTER ADVANCED
More informationCanadian Activities in Intelligent Robotic Systems - An Overview
In Proceedings of the 8th ESA Workshop on Advanced Space Technologies for Robotics and Automation 'ASTRA 2004' ESTEC, Noordwijk, The Netherlands, November 2-4, 2004 Canadian Activities in Intelligent Robotic
More informationDevelopments in Electromagnetic Inspection Methods I
6th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components October 2007, Budapest, Hungary For more papers of this publication click: www.ndt.net/search/docs.php3?mainsource=70
More informationconverting, extrusion and paper industries
converting, extrusion and paper industries accurate and reliable on line web gauging solution Measurement Coat weight Coat thickness Glue thickness Moisture CONVERTING, EXTRUSION, PAPER PROCESSING Coating,
More informationInnoval Technology Ltd
Innoval Technology Ltd Consultancy and technical support to the aluminium industry Dr Junjie Wang, Senior Surface Technologist Innoval Technology our background 2003 - Innoval was formed as a result of
More informationOptimization of a Cold Rolling Mill with a High Speed X-ray Thickness Gauge
Optimization of a Cold Rolling Mill with a High Speed X-ray Thickness Gauge Christopher Burnett, Thermo Fisher Scientific, Mount Airy, MD, United States White Paper Key Words Thickness Gauge, X-ray absorption,
More informationCTC CASTER TECHNOLOGY CONSULTING EXPERT ASSISTANCE FOR IMPROVED PERFORMANCE
CTC CASTER TECHNOLOGY CONSULTING EXPERT ASSISTANCE FOR IMPROVED PERFORMANCE A VAI Continuous Casting Technology primetals.com CASTER TECHNOLOGY CONSULTING IN PURSUIT OF EXCELLENCE ADVANTAGES OF CASTER
More informationFOREST PRODUCTS: THE SHIFT TO DIGITAL ACCELERATES
FOREST PRODUCTS: THE SHIFT TO DIGITAL ACCELERATES INTRODUCTION While the digital revolution has transformed many industries, its impact on forest products companies has been relatively limited, as the
More informationINFRARED LINESCANNER SERIES ENGLISH MP150. Thermal Imaging for Industrial Applications. MP150 Linescanner
INFRARED LINESCANNER SERIES ENGLISH MP150 Thermal Imaging for Industrial Applications MP150 Linescanner MP150 Linescanner with DataTemp DP Software The MP150 Linescanner Series is a family of advanced
More informationDATE: 17/08/2006 Issue No 2 e-plate Operation Overview
Page 1 of 7 Fundamentals Introduction e-pate technology is the next generation of long range RFID (Radio Frequency IDentification). The objective is wireless and automated data collection of vehicles and
More informationHeavy Plate Leveler improvement by coupling a model to a flatness gauge
Heavy Plate Leveler improvement by coupling a model to a flatness gauge Laurent Bodini, Siemens VAI Metals Technologies SAS, 51 rue Sibert, F-42403 Saint Chamond cedex Olaf Ehrich, Thyssenkrupp Steel,
More informationHIGHER QUALITY. FASTER MOULDS.
HIGHER QUALITY. FASTER MOULDS. Established in 1952, SCHÖTTLI has evolved from pioneer of the injection moulding industry to global player and specialist for developing and manufacturing moulds and complete
More informationMichigan State University College of Engineering; Dept. of Electrical and Computer Eng. ECE 480 Capstone Design Course Project Charter Fall 2017
Michigan State University College of Engineering; Dept. of Electrical and Computer Eng. ECE 480 Capstone Design Course Project Charter Fall 2017 Team 2: Adaptive 3D Sensing Technology for Rapid NDE: Phase
More informationVia Cantone, Pogliano Milanese (MI) - Italy Tel.: /2 Fax: Site:
Via Cantone, 19 20010 Pogliano Milanese (MI) - Italy Tel.: ++39 029341221/2 Fax: ++39 0293549211 Site: www.cife.it E-mail: info@cife.it Codice Fiscale e Partita IVA: 07193520967 C.C.I.A.A.: Mi-1942144
More informationFinishing first how automated systems improve the productivity and repeatability of wafer lapping and polishing
Finishing first how automated systems improve the productivity and repeatability of wafer lapping and polishing Author: Mark Kennedy www.logitech.uk.com Overview The lapping and polishing of wafers for
More informationNOVEL PROTECTION SYSTEMS FOR ARC FURNACE TRANSFORMERS
NOVEL PROTECTION SYSTEMS FOR ARC FURNACE TRANSFORMERS Ljubomir KOJOVIC Cooper Power Systems - U.S.A. Lkojovic@cooperpower.com INTRODUCTION In steel facilities that use Electric Arc Furnaces (EAFs) to manufacture
More informationStudy on the Development of High Transfer Robot Additional-Axis for Hot Stamping Press Process
Study on the Development of High Transfer Robot Additional-Axis for Hot Stamping Press Process Kee-Jin Park1, Seok-Hong Oh2, Eun-Sil Jang1, Byeong-Soo Kim1, and Jin-Dae Kim1 1 Daegu Mechatronics & Materials
More informationFUNDAMENTALS ROBOT TECHNOLOGY. An Introduction to Industrial Robots, T eleoperators and Robot Vehicles. D J Todd. Kogan Page
FUNDAMENTALS of ROBOT TECHNOLOGY An Introduction to Industrial Robots, T eleoperators and Robot Vehicles D J Todd &\ Kogan Page First published in 1986 by Kogan Page Ltd 120 Pentonville Road, London Nl
More informationComau AURA - Advanced Use Robotic Arm AURA. Soft as a Human Touch
AURA Soft as a Human Touch 2 The Culture of Automation Designing advanced automation solutions means thinking about the industry in a new way, developing new scenarios, designing innovative products and
More informationCSIR R&D in emerging manufacturing technologies. Dr Neil Trollip
CSIR R&D in emerging manufacturing technologies Dr Neil Trollip Tesla Production Line State of SA Manufacturing sector CSIR Vision: Catalyse re-industrialisation Technologies driving FIR / NIR Fourth Industrial
More informationAURA Soft as a Human Touch
The Culture of Automation AURA Soft as a Human Touch Designing advanced automation solutions means thinking about the industry in a new way, developing new scenarios, designing innovative products and
More informationIn-Process Sensing of Laser Powder Bed Fusion Additive Manufacturing
In-Process Sensing of Laser Powder Bed Fusion Additive Manufacturing S. M. Kelly, P.C. Boulware, L. Cronley, G. Firestone, M. Jamshidinia, J. Marchal, T. Stempky, and C. Reichert Presenter: Yu-Ping Yang
More informationOpto-VLSI-based reconfigurable photonic RF filter
Research Online ECU Publications 29 Opto-VLSI-based reconfigurable photonic RF filter Feng Xiao Mingya Shen Budi Juswardy Kamal Alameh This article was originally published as: Xiao, F., Shen, M., Juswardy,
More informationModel-Based Design for Sensor Systems
2009 The MathWorks, Inc. Model-Based Design for Sensor Systems Stephanie Kwan Applications Engineer Agenda Sensor Systems Overview System Level Design Challenges Components of Sensor Systems Sensor Characterization
More informationAutomatic Control of Molten Metal Flow for Improving Casting Performance
Automatic Control of Molten Metal Flow for Improving Casting Performance Jan Strömbeck 1, Thomas Jarlsmark 1, Mikael Terner 1 and Jerry Wilkins 2 1 Precimeter Control AB, Östra Hamnen 7, SE-475 42 Hönö,
More informationNORTH AMERICA ONLY GENERAL INFORMATION SCRAP SHEDDING ON DIES
GENERAL INFORMATION SCRAP SHEDDING ON DIES 1. CAST S FOR NOISE REDUCTION SEE W-DX5-58M PAGE 5. ALL S, ARE TO BE DESIGNED WITH A PREFERRED SHEDDING ANGLE OF 30 DEGREES, REACHING TO THE EDGE OF THE DIE.
More informationPrinciples of Engineering
Principles of Engineering 2004 (Fifth Edition) Clifton Park, New York All rights reserved 1 The National Academy of Sciences Standards: 1.0 Science Inquiry 1.1 Ability necessary to do scientific inquiry
More informationROBOTICS, Jump to the next generation
ROBOTICS, Jump to the next generation Erich Lohrmann Area Director Latin America KUKA Roboter GmbH COPY RIGHTS by Erich Lohrmann Human Evolution Robotic Evolution (by KUKA) International Conference on
More informationMarking and engraving Solutions for OIL & GAS industry
Marking and engraving Solutions for OIL & GAS industry MANUFACTURERS OPERATING SITES MAINTENANCE Areas of activity MARK-TRACE-IDENTIFY Under its Gravograph, Technifor and Propen brands, Gravotech has developed
More informationNEW SITUATION IN COLD MILLS SINCE VTLG THICKNESS MEASUREMENT WITH LASER IS POSSIBLE
IWCC TECHNICAL SEMINAR 2018, CHICAGO NEW SITUATION IN COLD MILLS SINCE VTLG THICKNESS MEASUREMENT WITH LASER IS POSSIBLE IWCC Legal Disclaimer: The purpose of this presentation is to guide programs benefiting
More informationScrappiX. Visual inspection equipment for dimensional. and surface defects control
ScrappiX Visual inspection equipment for dimensional and surface defects control ScrappiX Visual inspection equipment for dimensional and surface defects control Scrappix is an innovative visual inspection
More informationModule 3 Selection of Manufacturing Processes IIT BOMBAY
Module 3 Selection of Manufacturing Processes Lecture 8 Co-selection of Materials and Processes Instructional objectives By the end of this lecture, the student will learn (1) how to categorise various
More informationUTILIZATION OF INDUCTION HEATING TECHNOLOGY IN GALVANIZING LINES Victor Demidovich 1
UTILIZATION OF INDUCTION HEATING TECHNOLOGY IN GALVANIZING LINES Victor Demidovich 1 Abstract: Continuous Hot-Dip Galvanizing lines are widely used for the production of coated steel sheets. Quality improvement
More informationThe producers of galvanised steel strip, like all areas
EMG emass electromagnetic strip stabilisation Many hot-dipped galvanising lines (HDGL) tend to over-coat zinc and other coatings because the process control system is unable to compensate for strip oscillation
More informationPersonnel in Machining
LIST OF EQUIPMENT PREMISES AND WORKSHOPS Functions - Design and engineering - Project management - Quality and HSE assurance - Thermal shape and precision cutting - Edge preparation and bevelling - Bending
More informationSkyworker: Robotics for Space Assembly, Inspection and Maintenance
Skyworker: Robotics for Space Assembly, Inspection and Maintenance Sarjoun Skaff, Carnegie Mellon University Peter J. Staritz, Carnegie Mellon University William Whittaker, Carnegie Mellon University Abstract
More informationCommercialisation Strategies IP Management at BlueScope Steel UDO BUECHER MELBOURNE 29 SEPTEMBER 2004
Commercialisation Strategies IP Management at BlueScope Steel UDO BUECHER MELBOURNE 29 SEPTEMBER 2004 Please ask me about anything you would like to know about IP at BlueScope steel at any time. I am happy
More informationCALENDERING INDUSTRIES
CALENDERING INDUSTRIES Advanced Web Solutions APPLICATION NOTE WEB GAUGING NDC s Calender Solutions: Engineered to deliver outstanding results from your process NDC s Calendering Systems represent reliable
More information2. The re-examination application link on the portal will be active during the below mentioned period:
IMPORTANT INSTRUCTIONS TO CANDIDATES 1. All the eligible students who have enrolled in the Academic Year 2014-2015 onwards in the first year of the program are hereby informed to apply for the respective
More informationDrawing. Fig. 1 Drawing
Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet
More informationCycle Time: 30 sec./tire Dimensions: 13 m x 13 m
Uni-Stage TBM Cycle Time: 30 sec./tire Dimensions: 13 m x 13 m The new generation of the INTEREUROPEAN s fully automatic Tire Assembling Machines provide a fully automatic solution for building high performance
More informationGOVERNMENT COLLEGE OF ENGINEERING, BARGUR
1. Which of the following is the major consideration to evolve a good design? (a) Cost (b) Durability (c) Compliance with performance criteria as laid down in specifications (d) All of the above 2 impose
More informationADAS Development using Advanced Real-Time All-in-the-Loop Simulators. Roberto De Vecchi VI-grade Enrico Busto - AddFor
ADAS Development using Advanced Real-Time All-in-the-Loop Simulators Roberto De Vecchi VI-grade Enrico Busto - AddFor The Scenario The introduction of ADAS and AV has created completely new challenges
More informationComponent Based Mechatronics Modelling Methodology
Component Based Mechatronics Modelling Methodology R.Sell, M.Tamre Department of Mechatronics, Tallinn Technical University, Tallinn, Estonia ABSTRACT There is long history of developing modelling systems
More information