Installation Instructions
|
|
- Phebe Wood
- 5 years ago
- Views:
Transcription
1 Instructions Created by an: Sidekick/Tracker 4 Door & 2 Door Roof Racks for Solid Tops (SKU# KEB-RR-4D & KEB-RR-2D) Installation Instructions Revised Notice: These instructions (Pictures and Text) were written to be used with the 4 Door Sidekick or Tracker. However, we have included notes and tech tips so these instructions can be used with the 2 door model as well. CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and equipment. For additional copies of these and other instructions go to: and click on the Instructions tab. Suggested Tools: Metric Socket: 12mm Standard Sockets: 1/2,7/16 Ratchet Torque Wrench: Inch Pound 5/32 Allen Wrench (Supplied) Combination Wrenches: 12mm & 1/2 Electric Hand Drill Socket Driver (to fit the hand drill): 5/16 Drill Bits: 1/4 & 1/2 (Supplied) 2 - C-Clamps (4 to 6 ) Center Punch Hammer 4-2X4X12 Boards
2 Roof Rack Mounting Parts & Hardware Mounting Parts 2D = 2 Door Models 4D = 4 Door Models L-Bracket (6 ea. for 4D) (4 ea. for 2D) 1/4 Hinge Bolt (6 ea. for 4D) (4 ea. for 2D) Rack Clamp (6 ea. for 4D) (4 ea. for 2D) Rack Plate (6 ea. for 4D) (4 ea. for 2D) 5/16 Cap Bolts 5/16 Flat Washers 5/16 Flat Washers 5/16 Split Washers 5/16 Nuts 1/4 Cap Bolts 1/4 Self Locking Nut (6 ea. for 4D) (4 ea. for 2D) 1/4 Split Washer 1/4 Flat Washer Well Nut M8 Flange Bolts M8 Serrated Flange Nuts Hinge Mount (double loop) (6 ea. for 4D) (4 ea. for 2D) Hinge Mount (triple loop) (6 ea. for 4D) (4 ea. for 4D) Hardware 1/2 Drill 1/4 Drill Qty 2D Qty 4D Size Description /16X18X3/4 Cap Bolts /16X18X3/4 Nuts /16 Flat Washers Hardware Qty 2D Qty 4D Size Description 8 12 M8X1.25X25m Flange Bolts 8 12 M8X1.25 Serrated Flange Nuts 1 1 1/4 Drill Bit /16 Split Washers 8 12 Well Nuts /4X20X1 Cap Bolts /4 Split Washers /4 Flat Washers 4 6 1/4X20X51/2 Bolt 4 6 1/4 Self Locking Nut 1 1 1/2 Drill Bit
3 Roof Rack Parts & Hardware Roof Rack Parts Extension (2 Door Models will not have this extension) Rear Section 5/32 Allen Wrench Button Head Allen Screw Front Section Wind Fairing Self-drilling screws Rubber Washers Hardware Qty 2D Qty 4D Size Description X32 Self Drilling Screws Rubber Washers 2 4 Button Head Screws 1 1 5/32 Allen Wrench
4 Assembling the Roof Rack Note: Roof rack assembly procedure is the same for the 2 door roof rack as for the 4 door, except there is no extension for the 2 door models. Rear Section Extension Front Section Step 1 Unbox the package contents and insure that all the necessary pieces and hardware are accounted for. (See page 2 & 3) If anything is missing please call or Sales@lowrangeoffroad.com Step 2 Place the rack extension between the front and rear sections of the rack. Note: There is no extension piece supplied for the 2 Door Models. Note: Keep the packaging boxes to be used as a protective work surface. Step 3 Remove all the protective end caps from the extension. Step 4 Connect the rack extension to the front section.
5 Step 5 Connect the rear section to the extension. Step 6 Turn the rack over. Screw Holes Step 7 Adjust the rack pieces so that the screw holes align. Step 8 Start the four (2 for 2 door models) button head allen screw. Note: Leave them loose for now.
6 Step 9 Once all the button head allen screws are started, tighten them with the supplied 5/32 supplied allen wrench. Tech Tip 9 The remainder of package contents will not be used with this installation. They are used to attach the roof rack to many OEM (Original Equipment Manufacturers) roof racks. Put these items in a safe place. You may need them in the future. Attaching the Wind Fairing Step 10 Turn the rack over again. Step 11 Remove the protective covering from the front of the rack. Note: The rack is the same on both ends. So which ever end you chose to install the wind fairing on, becomes the front of the roof rack.
7 Step 12 Position the fairing such that all 8 holes are centered on the tubing where the screws will be installed. Step 13 Once the fairing is properly positioned, clamp it into place using the 2 C- Clamps. Caution: It is very important that the holes be centered on the tubes. If they are not centered, the self drilling screws will be difficult to install. Step 14 Using a center punch and hammer, make a small dent in the tube, centered with the fairing hole. Note: It works best to begin at one end of the fairing and work toward the other. We chose to start on our right work toward the left. Step 15 Each self drilling screw has two rubber washers. One goes on the back side of the fairing and the other goes on the front side of the fairing.
8 Step 16 Install the first self drilling screw using a 5/6 socket and electric hand drill. Note: Leave it loose for now. Step 17 Repeat steps 14 through 16 on the other 7 attaching points working from right to left. Step 18 Now that all the screws are started, tighten all the screws working right to left.
9 Attaching the Mounting Brackets to the Rack Step 19 Turn the rack over again. Tech Tip 19A The placement of the six (four for the 2 door models) mounting brackets is somewhat optional. We recommend placing them on the 2nd and 3rd tubes from the front end and the 2nd and 3rd tubes from the rear. (See Tech Tip 19B). Then placing the middle mounting brackets evenly spaced between the front and rear locations. It really is your choice. Also keep in mind this is only a preliminary location at this point. The positioning of all the brackets can be changed when the rack is initially placed on top the vehicle.
10 Figure A
11 Tech Tip 19B Recommended mounting bracket locations. Tech Tip 19C This shows the recommended rack mount locations for the 2 Door Models. Step 20 Position one of the rack clamps as shown. Step 21 Position one of the rack plates and align the holes.
12 Outside Holes Inside Holes Step 22 Position (2) 8X1.25X25mm flange bolts through the holes as shown. Step 23 Position one of the L-Brackets on the bolts as shown. Note: We used the inside holes of the L-Bracket for our instructions. However, a f t e r c o m p l e t i n g o u r r o o f r a c k installation we decided that using the outside holes would have given the brackets greater strength. So we recommend using the outside holes. Step 24 Start two of the serrated flange nuts on the bolts. Leave the nuts loose for now. Step 25 Position the double loop half of the hinge bracket and install a 5/16X18X3/4 bolt and flat washer. See Figure A, Diagram 1. Note: See Figure A Diagram 3 for an alternate method of installing the hinge. We will show the method used in Diagram 2, but you could use the method shown in Diagram 3 if desired.
13 Step 26 Install a 5/16 flat washer, a 5/16 lock washer and a 5/16 nut. Leave the nut loose for now. Step 27 Repeat Steps 25 and 26 on the second bolt. Leave this loose as well. Step 28 Position the 3 loop part of the hinge bracket as shown and install the 1/4X20X51/2 bolt. Step 29 Install a 1/4 self locking nut. Leave the nut loose for now.
14 Step 30 Repeat Steps 20 through 29 on the other (5) bracket locations leaving all the nuts and bolts loose for now. Step 30 (For 2 Door Models) Repeat Steps 20 through 29 on the other (3) bracket locations leaving all Attaching the Rack to the Front Step 31 With help from and assistant, turn the rack over and carefully place the rack on top the vehicle. Note: Be sure the rack is oriented with the fairing toward the front of the vehicle. Step 32 Position each mounting bracket assembly according to your best judgement. You will want the well nuts (See Figure A) to be located in areas where water will NOT pool; such as on raised areas of the roof. Also, be sure there is plenty of room between the roof and the headliner for drilling and well nut placement.
15 Step 33 Further position the rack such that it is centered side-to-side and front-to-back. Also, double check that the brackets are positioned where you want them to be. Remember, we left all the nuts and bolts loose so these brackets could be adjusted. Step 34 Once you are sure the rack and the mounting brackets are positioned where you want them, beginning at the driver side from mount, mark the location of the (2) well nuts, using a center punch and hammer. Note: Be sure the center punch is centered on the hole of the hinge. Step 35 Drill (2) pilot holes precisely where the center punch marks were made using a supplied 1/4 drill bit. Caution: Do not drill down through the headliner. Step 36 Flip the hinge up out of the way and drill the well nut hole using the supplied 1/2 drill bit. Caution: Do not drill down through the headliner.
16 Well Nut Roof Step 37 Install the two well nuts. They must fit all the way down such that the flange contacts the roof. (See Tech Tip 37) Tech Tip 37 Well nut must sit down all the way as shown above. Note: In some cases you may find that the well nut does not go all the way down in the hole. If this happens, you will need to drill a little deeper into whatever is preventing the well nut from sitting properly. Do not drill too deep. Step 38 Reposition the hinge and install the 1/4X20X1 cap bolt, flat washer and lock washer as shown in Tech Tip 38. Note: Leave the bolts loose for now. Tech Tip 38 This shows proper hardware installation of the well nut bolt, flat washer and lock washer.
17 Step 39 Repeat Steps 34 through 38 at the other 5 (3 for the 2 Door Models) locations. Step 40 Beginning at any of the 6 (4 for the 2 door models) bracket locations, press down on the hinge (to hold the well nut secure and prevent it from turning) and tighten the (2) 1/4 bolts using a 7/16 socket to 10 Inch Pounds. Note: Do not over-tighten these bolts. Step 41 Repeat Step 40 at all 5 (3 for 2 Door Models) bracket locations. Step 42 Beginning at any of the 6 (4 for 2 Door Models) locations, tighten the hinge bolt and nut using (2) 7/16 end wrenches. Note: Be careful not to damage the paint on the roof.
18 Step 43 To accurately space the rack above the roof we used (4) 2X4X12 boards under the rack as shown. Rack to Roof spacing is optional, but we recommend you leave plenty of space so that when the rack is loaded with gear, it will not touch the roof. These 2X4 s seem to be just the right height. Step 44 Tighten the (2) hinge-to-l-bracket hardware using a 7/16 box end wrench and socket. Step 45 Tighten the rack-to-l-bracket clamps using a 12mm box end wrench and socket. Step 46 Repeat Steps 44 & 45 at the other 5 (3 for 2 Door) bracket locations.
19 Step 47 Remove the 2X4 s. Step 48 Remove the protective covering. Congratulations! You have successfully completed the installation of the a roof rack. We sincerely hope these instructions have been helpful. If you have suggestions about how we can improve our instructions (or products) please us at: sales@lowrangeoffroad.com
20 As always, If you experience any difficulty during the installation of this product please contact Low Range Off-Road Technical Support at M-F 7:30am-5:30pm MST. Thank you for purchasing from Low Range Off-Road. These instructions are designed as a general installation guide. Installation of many Low Range Off-Road products require specialized skills such as metal fabrication, welding and mechanical trouble shooting. If you have any questions or are unsure about how to proceed, please contact our shop at or seek help from a competent fabricator. Using fabrication tools such as welders, torches and grinders can cause serious bodily harm and death. Please operate equipment carefully and observe proper safety procedures. Rock crawling and off-road driving are inherently dangerous activities. Some modifications will adversely affect the on-road handling characteristics of your vehicle. All products sold by Low Range Off-Road are sold for off road use only. Any other use or application is the responsibility of the purchaser and/or user. Some modifications and installation of certain aftermarket parts may under certain circumstances void your original dealer warranty. Modification of your vehicle may create dangerous conditions, which could cause roll-overs resulting in serious bodily injury or death. Buyers and users of these products hereby expressly assume all risks associated with any such modifications and use. Revised 4/14/14 Copyright 2014 Low Range Off-Road, LC All Rights Reserved
Installation Instructions
86-95 Suzuki Samurai LROR Sport Cage Front (SKU# SRC-SCF) Installation Instructions Front and Rear Cage Combined CAUTION: Safety glasses should be worn at all times when working with vehicles and related
More informationInstructions Suzuki Samurai E-Brake Caliper Lever Reorientation
Instructions Created by an: 86-95 Suzuki Samurai E-Brake Caliper Lever Reorientation Instructions Some of these calipers that were supplied in our kits have the lever oriented incorrectly. These instructions
More informationInstallation Instructions
86-95 Samurai Blower Motor Switch (SKU# SIB-HBS) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and equipment. Suggested Tools:
More informationInstallation Instructions
86-95 Suzuki Diamond Plate Interior Panels (SKU# SIB- DPI) Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and
More informationInstallation Instructions
Instructions Created by an: Suzuki Samurai, Sidekick, X90 Geo Tracker Off Road Universal Joint (SKU# SAX-UJOR) Instructions also apply to: SKU# SAX-UJOE, SDT-FY-9095, SAX-SY, STM-SL Installation Instructions
More informationInstallation Instructions
86-95 Samurai (SJ413) SJ410 Aluminum Replacement Door Handles (SKU# SEB- ADH) Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when working with vehicles and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS ROCK SLIDERS APPLICATION: 2007-2017 Jeep Wrangler JK 2 Door PART NUMBER: 42-7005 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 ROCK SLIDER ASSEMBLY, DRIVER
More informationRear Mount Installation Instructions
Rear Mount Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: DTC 0809-011 V1.0.10.12.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
More informationRear Katerack Installation Instructions
Rear Katerack Installation Instructions Ram Promaster City 2015+ Frame Kit Part #: CRC 26-1000-001 V1.0.12.04.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
More informationSAFETY. Read and understand all safety precautions and instructions before installing this product.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationRZR 4 Doors Part # Polaris RZR XP & Turbo ( ) Black
Racing 3191 N Washington St. Suite 2 Chandler, AZ 85225 1 (800) 708-9803 http://www.racing.com RZR 4 Doors Part # 07-1802 Polaris RZR XP 4 1000 & Turbo (2015-2018) Black Revision No: 01 Revision Date:
More information3/4 Rear DuraRac Installation Instructions
3/4 Rear DuraRac Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: CRC 27-1010-001 V1.0.09.28.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
More informationINSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: and Application: All UTV s*
INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: 83970 and 84360 Application: All UTV s* * does not include Arctic Cat vehicles Your safety, and the safety of others, is very important. To help
More informationFLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationSide Katerack Installation Instructions
Side Katerack Installation Instructions Ram ProMaster City 2015+ Frame Kit Part #: CRC 28-1000-001 V1.0.12.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
More informationSTYLE BAR & TONNEAU COVER INSTALLATION
STYLE BAR & TONNEAU COVER INSTALLATION INSTALLATION MANUAL: 2005 to '09 Mustang P/N: 10-8002-C12071B Saleen Performance, Inc. 1225 East Maple Rd., MI 48083 800-888-8945 www.saleen.com 1 IF YOU ARE NOT
More informationSide DuraRac Installation Instructions
Side DuraRac Installation Instructions Ford Transit Low Roof 130 /148 WB Frame Kit Part #: CRC 22-1010-002 V1.0.08.10.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE
More informationInstallation & Operations Manual 2 Piece Hood Rack for Polaris Ranger With Pro-Fit Roll Cage
Installation & Operations Manual 2 Piece Hood Rack for Polaris Ranger With Pro-Fit Roll Cage Part Number #08071 Installation information: This product has an installation rating of: Easy Approximate installation
More informationKaterack Wagon Shelving System
Ford Transit Connect Assembly Installation Instructions Sheet 1 of 14 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER
More information08+ KAWASAKI KLR PD NERF
08+ KAWASAKI KLR PD NERF 0505-1299 Before you begin, place the bike on a hard level surface where you have room to work. Lay out the parts included in this kit and compare to the parts list on page 5 of
More informationPPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0 GENERAL NOTES: These instructions are also available on our website; www.synergymfg.com.
More informationLED 40" LIGHT BAR BRACKETs
LED 40" LIGHT BAR BRACKETs RRAC099/RRAC101 If you would like to mount your Light Bar under your Rack, refer to Sections 3 and 4. You will need a minimum of 100 mm clearance between the bottom of the Rack
More informationPRODUCT: JK Rocker Exo-Skins READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL M-F 7:00 AM 5:00 PM PST
PRODUCT: JK Rocker Exo-Skins READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 7:00 AM 5:00 PM PST REV: B 06-29-2015 II-3311/3316 The MetalCloak experience includes the ease
More informationRSA GELANDEWAGEN DOUBLE REAR DOOR TRAY. FRONTRUNNEROUTFITTERS.COM should you have any queries. GET ORGANIZED. INSTALL TIME: 0.
GELANDEWAGEN DOUBLE REAR DOOR TRAY RSA VACC020 HINT Please consult FRONTRUNNEROUTFITTERS.COM should you have any queries. INSTALL TIME: 0.75 hours 1 GET ORGANIZED you will need: a Gelandewagen with double
More informationCTTR Tire Rack Required tools
CTTR Tire Rack Required tools Torque wrench, ratchet, 9/16 socket, tape measure, and square edge. ASSEMBLY REQUIREMENTS *Torque all T-bolt nuts to 35-40 foot pounds. Failure to follow the assembly instructions
More informationAssembly Instructions
1 BLT-27565 FDB Stand Assembly Instructions BLT-27565 FDB Stand Part Drawing Description Qty Part Drawing Description Qty P-1 Top Shelf 1 EA P-10 LL Lower Leg 1 EA P-11 Middle Shelf 1 EA P-2 L-Upper Leg
More informationC4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS
C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS Thank you for your purchase of the C4 Fabrication s 5th Gen 4Runner Rock Sliders! This product was carefully crafted to ensure a perfect
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SNYPER TUBULAR FENDERS APPLICATION: 2007-2017 Jeep Wrangler JK PART NUMBER: 62-1005, 62-1015 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 FRONT FENDERS, DRIVER (1) AND PASSENGER
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationRam Promaster Rack. Installation instructions for
Installation instructions for Ram Promaster Rack MyGlassTruck.com 200 Acorn Road LOCAL 856-595-9069 WEB www.myglasstruck.com Glassboro, NJ 08028 FAX 856-863-1480 1-844-364-4022 Version 1.0 November 2015
More informationMedium HoneyBadger Chase Rack Installation Instructions
PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading
More information55000/55010 Installation Instructions
A. Install 55015 B. Bolt roof rails, 55020/55025, to front hoop. C. Assemble 55026 D. To install without drilling into bumper. E. If mounting directly to bumper. A. 55015 Installation Instructions 55000/55010
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: 2007-2010 CHEVY/GMC SILVERADO/SIERRA 2500/3500 (EXCLUDES CLASSIC) APP PART #46-23715, 40-92315/45-92310 MAX WINCH TRAY, SPORTSMAN
More informationFoot Rail. toyota 4 Runner ( CURRENT) START HERE! READ ME FIRST
Foot Rail toyota Runner (2009 - CURRENT) ENG FATF00 START HERE! READ ME FIRST Don t be a hero and muscle through this without first reading these fitting instructions! Improper installation of this gear
More informationPARTITION INSTALLATION INSTRUCTIONS
PARTITION INSTALLATION INSTRUCTIONS 2015 Chevrolet Tahoe PPV / Part Number 5703FW, FWA & FEW Do not attempt to install this product on any vehicle equipped with third row seating! Parts List Distributed
More informationATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK TM INSTALLATION MANUAL BULKHEAD Model Number 96101-3-01 ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING
More informationFranklin Mills Stackable Movable Lateral Instructions
Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
1997-2006 Jeep Wrangler (Includes Rugged Ridge Double Tube Bumper) Attachment Tab Height: 17-3/4 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing
More informationASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS VEHICLE MOUNT KIT 99101282 AND VEHICLE CENTER MEMBER FOR 26 SERIES: 99100890 TO FIT 2017 - LATER NISSAN TITAN 4X4 Sno-Way, Down Pressure and EIS are registered trademarks
More informationIntercooler Shroud and Belt Cover for WRX
Intercooler Shroud and Belt Cover for 2015+ WRX 2016-05-18 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation
More information2-Door EXO-Top Roof Rack System
Page 1/29 Part 13516.01 2-Door EXO-Top Roof Rack System! WARNING The EXO-Top Roof Rack System is rated to a dynamic 300 lb, evenly distributed load. Further loading could result in serious injury or death.
More informationFoot Rail. Nissan Navara_Frontier D23 DC START HERE! READ ME FIRST
Foot Rail Nissan Navara_Frontier D3 DC ENG FANN00 START HERE! READ ME FIRST Don t be a hero and muscle through this without first reading these fitting instructions! Improper installation of this gear
More informationAssembly & Installation Instructions
Assembly & Installation Instructions FOR SUBFRAME COMPONENTS PACKAGE 100760 TO FIT 1-2004 TOYOTA TACOMA 4x4 16-2002 TOYOTA 4 RUNNER 4x4 22 SERIES ONLY 2008 Sno-Way International 7101078B 1. THINK SAFETY,
More information4-Door EXO-Top Roof Rack System
Page 1/31 4-Door EXO-Top Roof Rack System 13516.02! WARNING The EXO-Top Roof Rack System is rated to a dynamic 300 lb, evenly distributed load. Further loading could result in serious injury or death.
More informationKAWASAKI KLRE PD NERF HTP4-8-5 & HIGHWAY PEGS HTP4-1-4B
Thank you for purchasing Happy Trails products. Our products are proudly hand made in Boise Idaho, USA. If you have any questions or concerns about the installation of this product, please contact us directly
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS
ASSEMBLY AND INSTALLATION INSTRUCTIONS Model 1425 Aluminum Swivel Rack IMPORTANT BEFORE YOU BEGIN Read these instructions and warnings completely before installation. CAPACITY 200 lbs. MAXIMUM NOTE: This
More informationShorePort PWC Lift Instructions " x 138" Sandstone ShorePort " x 138" White ShorePort " x 138" Tan ShorePort
ShorePort PWC Lift Instructions 00-8" x 8" Sandstone ShorePort 009-8" x 8" White ShorePort 090-8" x 8" Tan ShorePort....... - PUT SAFETY FIRST To avoid the risk of personal injury or death, study and fully
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationM ACS Instructions
APPLICABLE MODELS: Nissan Frontier 2005 and up short bed with Utili-Trak mounting rails PACKAGE CONTENTS 00-0060-M-01-1205 ACS Instructions Leitner Designs 25675 Taladro Circle Unit E Mission Viejo, CA
More informationINSTALLATION INSTRUCTIONS ATV Winch Mounting Kit Part Number: Applications: Honda Rancher. Before You Begin.
INSTALLATION INSTRUCTIONS ATV Winch Mounting Kit Part Number: 68852 Applications: 2000+ Honda Rancher As you read these instructions, you will see NOTES, CAUTIONS, and WARNINGS. Each message has a specific
More informationInstallation Instructions Hinged Roof Rack
Installation Instructions Hinged Roof Rack Application: Jeep Wrangler Unlimited 2004 - Current Part Number: 41435-01 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question
More informationRetro Fit Gearbox Mount. Assembly Instructions. Assembly Instructions. Before You Start. General Information. Manual No M
Retro Fit Gearbox Mount Assembly Instructions Treker 4400NT & 4400ST Series Before You Start Assembly Instructions Manual No. 700-372M! When you see this symbol, the subsequent instructions and warnings
More informationINSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION
INSTALLATION INSTRUCTIONS KK-K9-F14-K-32 32 K9 KIT FOR 2003-2016 FORD EXPEDITION TOOLS REQUIRED: Power Drill Drill Bit Set Standard & Metric Socket Sets Phillips Screw Driver Open End Wrench Set Wire Cutters
More information40993 Parts List. Front Bow Assy.(1) Rear Bow Assy.(1)
40993 Parts List Front Bow Assy.(1) Rear Bow Assy.(1) Rail Mnt Foot(4) Ladder Hook (2) Ladder Stop (2) Mounting Clip-ProMaster Only (6) Mounting Bracket(6) Long Mounting Rail(2) Short Mounting Rail(2)
More informationMODEL T1238 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17
MODEL T128 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17 For questions or help with this product contact Tech Support at (570) 56-966 or techsupport@grizzly.com Introduction The Model T128
More informationGared Pro-S Portable Backstop
Models: 9616 & 9618 Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE PUBLICATION
More informationBX Toyota Tacoma (Includes Prerunner) Installation Instructions
Attachment Tab Height: 11.5 Attachment Tab Width: 30.5" Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More informationCONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
More informationSpeaker Mount Center Channel Speaker Adapter (PAC-301)
I N S T R U C T I O N M A N U A L Speaker Mount Center Channel Speaker Adapter () The Speaker Mount Center Channel Speaker Adapter () uses the same interface as the Side Speaker Adapter and can be used
More informationPro Ski / Snowboard & Fishing Rod Carrier
Pro Ski / Snowboard & Fishing Rod Carrier ENG RRAC123 10 min READ ME! Thank you for purchasing a Front Runner Pro Ski / Snowboard & Fishing Rod Carrier. Before you start, take a moment to familiarize yourself
More informationAssembly & Installation Instructions FOR VEHICLE MOUNT KIT USING VEHICLE CENTER MEMBER
Assembly & Installation Instructions FOR VEHICLE MOUNT KIT 991002 USING VEHICLE CENTER MEMBER 9910092 TO FIT 99 - LATER Chevrolet 2500 Silverado 4x4 and 3500 Pickup 4x4 99 - LATER GM 2500 Sierra 4x4 and
More informationInstallation Manual. SKU# TracVan Double SKU# TracVan Double SKU# TracVan Triple
Installation Manual SKU# 29054 TracVan Double SKU# 29055 TracVan Double SKU# 29056 TracVan Triple TRACVAN INSTALLATION INSTRUCTIONS SKU# 29054, 29055 & 29056 TracVan installation is straightforward, and
More informationFoot Rail. Volkswagen T5 / T6 Caravelle / Transporter START HERE! READ ME FIRST
Foot Rail Volkswagen T / T Caravelle / Transporter ENG FAVT00 START HERE! READ ME FIRST Don t be a hero and muscle through this without first reading these fitting instructions! Improper installation of
More informationEnclosed Partition Installation Instructions
Nissan NV1500/2500/3500 High Roof Partition Kit Part #: DTC 1502-036 V1.0.08.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE
More informationK9 KIT INSTALLATION INSTRUCTIONS CROWN VIC with Fire Suppression System Model KK-K9-F7-K-FS
K9 KIT INSTALLATION INSTRUCTIONS 2005-2011 CROWN VIC with Fire Suppression System Model KK-K9-F7-K-FS TOOLS REQUIRED: Power Drill (Cordless preferable) Drill Bit Set Standard Wrench and Socket Set Metric
More informationE4-WM5-Y525A00 MOUNTING INSTRUCTION
RAM 2500/3500 4WD B8 5100 (Dual Steering Damper Kit) The installation of these steering dampers must be performed only by experienced and qualified personnel. Read and follow the installation instructions
More informationHisun Deluxe Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions. Owner s Manual.
Owner s Manual Model: Hisun Hisun Deluxe Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions. Safety Instructions Cab kit Contents Hardware Assembly Panel Assembly
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory FABRIC REAR DOORS (5P) P/N 0SR90-HL4-211B (BLACK) P/N 0SR90-HL4-211C (CAMO) Application SXS1000M5P/M5D Honda Dealer: Please give a copy of these instructions to your
More informationKD Table Base Assembly and Top Attachment Instructions
KD Table Base Assembly and Top Attachment Instructions 4011xx 5000xx 7014xx 8001xx 8206xx Congratulations on the purchase of your Tropitone furniture. Read through all steps before starting assembly. CAUTION:
More informationASSEMBLY INSTRUCTIONS for :
ASSEMBLY INSTRUCTIONS for : 800 0 TMCS_3:1 (916) 638-8703 (800) 343-7486 11261 Trade Center Drive Rancho Cordova, CA 95742 www.kargomaster.com Tools Needed Hardware Pack Cont' 8' Tape Measure 1/2" End
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
Attachment Tab Height: 17 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and accessories
More informationTOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT General Applicability All 2012 and newer Tacoma models
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and
More informationMONKEY BARS OVERHEAD RACK INSTALLATION
MONKEY BARS OVERHEAD RACK INSTALLATION Thank you for purchasing the New Monkey Bars Overhead storage rack. The most innovative overhead rack on the market WARNING THE PROPER INSTALLATION OF THIS STORAGE
More informationTOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
Attachment Tab Height: 16-1/2 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More informationDOOR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6. Verify accessory fitment at Polaris.com.
DOOR KIT P/N 2882528 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
More informationPolaris XP Doors (P144202) Installation Instructions
Polaris XP4 000 Doors (P440) Installation Instructions WARNING Pro Armor Door and Net are designed to work together to replace your original equipment nets and/or door. Install both the Pro Armor Door
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationWooden Frame Type Instruction Manual
Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
More informationFord Pick Up Rear leaf Spring Kit Installation Instructions
1948-1956 Ford Pick Up Rear leaf Spring Kit Installation Instructions 1-800-984-6259 www.totalcostinvolved.com Parts 48 inch leaf (2) springs (4) U-bolts 3/8-24 x l 1/4bolts (16) & nuts (2) 1/2-20 x 4
More informationHatchback Wing Riser Kit
Hatchback Wing Riser Kit 2015-06-11 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation of aftermarket
More informationFreshSesh, PowderHound & Big PowderHound
FreshSesh, PowderHound & Big PowderHound Carrier (2x) universal mounting bracket (4x) SkiLift (2x) (mounting bracket parts:) Hex Key with Bolt (2x) SkiLift (2x) Button Head Screw (2x) Hex Wrench (1x) Base
More informationENG DEFENDER SPARE WHEEL BRACKET RBLD001 GET ORGANIZED. INSTALL TIME:1.5 hours
DEFENDER SPARE WHEEL BRACKET ENG RBLD001 INSTALL TIME:1.5 hours 1 GET ORGANIZED you will need: Land Rover Defender a Friend Clinch nut tool Drill machine 4,7, 8 & 9 mm drill bit 10,13,19,24 mm spanner
More information11431 INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 0-PRESENT MAKE: FORD MODEL: FOCUS ST STYLE: HATCHBACK WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S
More informationSTART HERE BEFORE YOU BEGIN FIG 1 STEP 2
PROFESSIONAL INSTALL RECOMMENDED REAR MODULAR / MULTI LED ROOF MOUNTS PART#: Z350040 / Z350050 REAR ROOF LED LIGHT MOUNTS Parts included (1) - Driver Side Roof Mount Upright (1) - Passenger Side Roof Mount
More informationWARNING. BX Ford Explorer With Adaptive Cruise Control & Eco Boost Installation Instructions
Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who
More information4099T Parts List. Front Bow Assy. (1) Rear Bow Assy. (1) Long Mounting Rail (2) Short Mounting Rail (2)
4099T Parts List Ver.2 Front Bow Assy. (1) Rear Bow Assy. (1) Small Mnt Foot (2) Large Mount Foot (2) Ladder Hook (2) Ladder Stop (2) Handle Extension (1) Long Mounting Rail (2) Short Mounting Rail (2)
More informationINSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA
INSTALLATION INSTRUCTIONS KK-K9-C12-K 2000-2005 CHEVY IMPALA READ ALL INSTRUCTIONS PRIOR TO INSTALLATION TOOLS REQUIRED: Power Drill Drill bits1/4 and 5/32 7/l6 wrench and socket 15,18 and\or 19mm socket
More informationPRODUCT: 3/8 Rivet Nut Installation READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL M-F 7:00 AM 5:00 PM PST
PRODUCT: 3/8 Rivet Nut Installation READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 7:00 AM 5:00 PM PST REV: C 06-23-2015 II-0079 The MetalCloak experience includes the
More informationSAFETY. Injury hazard
SAFETY Installation Guidelines Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information.
More informationFORD RANGER Onwards SLIMLINE II RACK (1255MM x 1358MM)
FORD RANGER - 2012 Onwards SLIMLINE II RACK (1255MM x 1358MM) FAFR001 / KRFM010T INSTALL TIME: 60 mins READ ME FIRST: Thank you for purchasing a Front Runner Slimline II Rack. This Roof Rack consists of
More informationLAnd Rover defender TDI & TD5 Gullwing WINDOW Box. You will need to have installed a Gullwing Door before installing the Window Box.
LAnd Rover defender TDI & TD5 Gullwing WINDOW Box GWLD008 INSTALL TIME: 2 Hours You will need to have installed a Gullwing Door before installing the Window Box. IMPORTANT WARNING! IT IS CRITICAL THAT
More informationINSTALLATION INSTRUCTIONS K9-C20-32 & K9-C CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL
INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C21-32 2007-2014 CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL TOOLS REQUIRED: Power drill Drill bit set Standard & metric socket sets Phillips screwdriver
More informationIN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench.
Tools Required 2011-C Ford F250/F350 No Drilling into Vehicle is Required 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench FL277 x 1 Torque Specification: 1/4 Bolts - 6 Ft Lbs.
More informationSheet Metal Brake Plans for a 6' Sheet Metal Brake
Sheet Metal Brake Plans for a 6' Sheet Metal Brake,1752'8&7,21 Thank you for purchasing the sheet metal brake plans. The plans include a complete list of material needed and easy to follow steps to build
More information