Miniature photoelectric switches series W4-3: The efficient space savers
|
|
- Kathleen Tyler
- 5 years ago
- Views:
Transcription
1 iniature photoelectric switches series W-: The efficient space savers Photoelectric reflex switch with switching threshold adaptation and autocollimation. Transparent objects of all kinds can be reliably detected in difficult and changing ambient conditions, with the switching threshold being automatically adapted to the changing ambient conditions, such as dust gathering on the optical surfaces. D ATA SH E E T Photoelectric proximity switches BGS Photoelectric reflex switches Through-beam photoelectric switches IIt is the little things that make you big : minimum size, maximum versatility. Three versions of the W- series offer the users the following benefits for their application: Clearly visible light spot. The integration of new pinpoint LEDs creates brilliant, tightly defined light spots. Thus, the photoelectric switches can be aligned easily and quickly, as the light spot is easy to see even in bright ambient conditions. Best background suppression in its class. Background suppression offering more than just a good black/white displacement, i. e. object detection in front of reflective and moving backgrounds. The sensor has a nd sender LED allowing the sensor to see spatially. Optimum ambient light suppression. The photoelectric proximity switch needs to detect objects directly in front of an energy-saving lamp or a fluorescent lamp no problem. Light from such sources is identified and suppressed. Hygienic and safe to use in aggressive environments. Hydrofluoric acid, coolants, alcohols etc. cannot affect the fully Teflon-encapsulated versions even when exposed for long periods.
2 W- Selection table Reliably solved with linear light spot featured in the WTB-: Continuous detection of honeycomb structured objects, Accurate positioning, irrespective of grooves or recesses in objects, Reliable detection of falling objects. WTB- Photoelectric proximity switch with background suppression Detection of objects, irrespective of colour and consistency, up to the predefined scanning distance Best background suppression Clearly visible light spot Photoelectric proximity switch WTBS- with laser-like light spot: detection of the inserted PC board, at a distance of 80 mm, with pinpoint accuracy. The reflecting background does not interfere with the sensor s performance if no tool carrier is clamped and the robot moves. Laser-like light spot in the WTBS- for: Accurate positioning of the light beam on the object, Reliable detection of small objects immediately in front of a background, Very good visibility of the light spot on the object. WL- and WLG- Photoelectric reflex switches Safe and easy mounting. The mounting holes are fitted with threaded metal bushes for added strength. uick and easy alignment using the clearly visible light spot. Detection of transparent objects with switching threshold adaptation. Photoelectric reflex switch WLGS- thinks and controls with: automatic switching threshold adaptation transparent objects with an attenuation of > 8% are reliably detected. Detection of transparent objects such as PET bottles, even with dust and moisture present, Implementation of the sensor close to the process, without expensive mounting systems, Clear visibility of the light spot aids the alignment of the sensor, from nearly all conceivable positions. WSE- Through-beam photoelectric switches Fast and reliable alignment of the sensors through brilliant light spot. SICK
3 Housing Version Light beam geometry Description Side view Slim housing Standard photoelectric proximity switch Scanning distance:... 0 mm. mm in 0 mm For standard applications: packaging, paper, cardboard, PC boards, solar cells. Page to Laser-like Scanning distance:... 0 mm < mm of 0 mm to 80 mm Detection and positioning of small parts and any object directly in front of a background. to Standard photoelectric proximity switch Scanning distance:... 0 mm 7 mm in 0 mm For standard applications: detection of packaging, paper, cardboard, PC boards, solar cells etc. to 7 V-optics Scanning distance:... 0 mm 0 mm in 0 mm Detection of transparent and reflective objects: e. g. transparent trays, shiny packages, blister packs. 8 to 9 Line sensor Scanning distance:... 0 mm x 8 mm in 0 mm Detection of structured objects: grid boxes, PC boards with gaps, monitoring of small ejected parts. 0 to Standard sensor in Teflon housing Scanning distance:... 0 mm 7 mm in 0 mm Detection of objects in harsh ambient conditions or directly in contact with liquids. H O -compatible. to Side view Slim housing Autocollimation with polarisation filter Range: m mm in. m Photoelectric switch for glass detection with switching threshold adaptation Range: m Standard with polarisation filter Range: m Photoelectric switch for glass detection Range: m mm in. m 7 mm in. m Small, high visibility light spot for the detection of small objects and where mounting space is restricted. Detection of transparent objects. Compensation for environmental effects such as temperature fluctuations, dust and dirt. For standard applications: With and without Teach-in function, sec. Teach for 0 % switching threshold. 8 sec. long Teach for transparent objects with > 8 % attenuation. 80 mm in. m Detection of PET bottles and foils > 8 % attenuation and of objects with critical shiny surfaces such as foil packaging and coffee packages. to 7 8 to 9 0 to to Side view Slim housing Range: 0... m 0 mm in.0 m Detection of small parts, advantageous for applications where space is restricted and where reflective surfaces are present. to 7 Range: 0... m 0 mm in.0 m For standard applications: sender with test input. 8 to 9 Teflon housing Range: 0... m 0 mm in.0 m Detection of objects in harsh ambient conditions or directly in contact with liquids. H O -compatible. 0 to SICK
4 Photoelectric proximity switch, WTBS-, BGS, red light, potentiometer Scanning distance mm Photoelectric proximity switch Dimensional drawing. 7. Highly accurate adjustment of the scanning distance with -turn potentiometer Outstandingly visible and tightly defined light spot Robust mounting thanks to metal bushes Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator green, power on LED indicator yellow, status of received light beam Potentiometer 7 ounting hole 8 Connector WTBS-F WTBS-N WTBS-P WTBS-P WTBS-P WTBS-E WTBS-N WTBS-P See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems 8, -pin 8, -pin 8, -pin x 0. mm² SICK
5 W- WTBS- E F N N P P P P Scanning distance typ. max. Operating distance Adjustment of operating distance mm mm Potentiometer, revolutions Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter. mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, PNP antivalent Dark-switching Light-switching Complementary 00 ma Response time < 0. s ) Switching frequency,000 Hz ) Cable, PVC, m 7) VDE protection class Connector, 8, -pin Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 7) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Novodur, PA ) Average service life 00,000 h at Ta = + C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Scanning distance (mm) Operating distance Scanning distance typ. max. Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission % of scanning distance (mm) Ordering information WTBS-E 007 WTBS-F 00 WTBS-N 00 WTBS-N 00 WTBS-P 00 WTBS-P 000 WTBS-P 00 WTBS-P SICK
6 Photoelectric proximity switch, WTBS-, BGS, red light, focussed, potentiometer Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing. 7. Highly accurate adjustment of the scanning distance with -turn potentiometer Easily visible laser-type light spot Robust mounting thanks to metal bushes Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator green, power on LED indicator yellow, status of received light beam Potentiometer 7 ounting hole 8 Connector WTBS-E WTBS-N WTBS-P WTBS-P WTBS-P WTBS-F WTBS-N WTBS-P x 0. mm² 8, -pin 8, -pin 8, -pin See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems WTBS-N x 0. mm² SICK
7 W- WTBS- E F N N N P P P P Scanning distance typ. max. Operating distance Adjustment of operating distance... 0 mm mm Potentiometer, revolutions Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter. mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, NPN antivalent PNP antivalent Dark-switching Complementary Light-switching 00 ma Response time < 0. s ) Switching frequency,000 Hz ) Cable, PVC, m 7) VDE protection class Connector, 8, -pin Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 7) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Novodur, PA ) Average service life 00,000 h at Ta = + C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Scanning distance (mm) Operating distance Scanning distance typ. max. Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission % of scanning distance (mm) Ordering information WTBS-E 00 WTBS-F 000 WTBS-N 00 WTBS-N 00 WTBS-N 00 WTBS-P 009 WTBS-P 00 WTBS-P 007 WTBS-P SICK 7
8 Photoelectric proximity switch, WTBS-, BGS, red light, focussed, teach-in Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing. A 7. A Easy commissioning through teach-in function Easily visible laser-type light spot Robust mounting thanks to metal bushes Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator green, power on LED indicator yellow, status of received light beam Teach-in button 7 ounting hole 8 Connector WTBS-N WTBS-N WTBS-P WTBS-P x 0, mm² x 0, mm² 8, -pin 8, -pin ET ET WTBS-P WTBS-P See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems 8, -pin 8, -pin ET 8 SICK
9 W- WTBS- N N P P P P Scanning distance typ. max. Operating distance... 0 mm mm Adjustment of operating distance Teach-in: single-teach button & cable ) Teach-in: single-teach button Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter. mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Light-switching 00 ma Response time < 0. ms ) Switching frequency,000 Hz 7) Cable, PVC, m 8) VDE protection class Connector, 8, -pin Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 8) Cable with plug, 8, -pin, PVC, 00 mm 8) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) External teach-in: impuls > s with voltage Vs for PNP or for NPN ) Average service life 00,000 h at Ta=+ C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load 7) With light/dark ratio : 8) Do not bend below 0 C Scanning distance (mm) Operating distance Scanning distance typ. max. Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission % of scanning distance (mm) Order information WTBS-N 00 WTBS-N 00 WTBS-P 00 WTBS-P 000 WTBS-P 00 WTBS-P SICK 9
10 Photoelectric proximity switch, WTBS-, BGS, focussed, IO-Link, teach-in Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing. 7. Parameterisation and diagnostics via IO-Link Easily visible laser-type light spot Robust mounting thanks to 0.9 metal bushes Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator green, power on LED indicator yellow, status of received light beam Teach button 7 ounting hole 8 Connector WTBSC-P WTBSC-P See Accessories chapter Connector,, -pin Connector, 8, -pin ounting systems 8, -pin /C, -pin /C 0 SICK
11 W- WTBSC- P P Scanning distance typ. max. Operating distance... 0 mm mm Adjustment of operating distance Teach-in: single-teach button Teach-in: via IO-Link Communication mode CO Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter. mm at 0 mm distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs PNP, /C PNP, not Switching mode Light-switching ) Output current I a max < 00 ma Response time < 0. ms ) Switching frequency,000 Hz 7) Connector, 8, -pin Cable with plug,, -pin, PVC, 0 mm 8) VDE protection class Circuit protection V s connections reverse-polarity protected / All outputs short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Parametrisable via IO-Link ) Signal transit time with resistive load in switching mode. Different values possible in CO mode. 7) With light/dark ratio : in switching mode. Different values possible in CO mode. 8) Do not bend below 0 C Scanning distance Ordering information WTBSC-P 009 WTBSC-P (mm) Operating distance Scanning distance typ. max. Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission % of scanning distance (mm) SICK
12 Photoelectric proximity switch, WTB-, BGS, red light, potentiometer Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing High-precision setting of scanning distance thanks to -turn potentiometer Object detection almost irrespective of colour and background consistency Secure function when mounted opposite other sensors Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator yellow, status of received light beam LED indicator green, power on Potentiometer 7 ounting hole 8 Connector WTB-P WTB-N WTB-F WTB-N WTB-P WTB-F WTB-P x 0. mm² 8, -pin 8, -pin See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems WTB-N x 0. mm² WTB-P 8, -pin WTB-P 8, -pin SICK
13 W- WTB- F F N N N P P P P P Scanning distance typ. max. Operating distance Adjustment of operating distance... 0 mm... 0 mm Potentiometer, revolutions Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 7 mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max PNP, NPN antivalent NPN, PNP antivalent Dark-switching Complementary Light-switching 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) VDE protection class Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 7) Cable, PVC, m 7) Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 7) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Scanning distance (mm) Operating distance Scanning distance, max. typical Scanning range on black, % remission Scanning range on grey, 8 % remission Scanning range on white, 90 % remission % of scanning distance %/90% 0 0 8%/90% 90%/90% 0 (mm) Ordering information WTB-F 0807 WTB-F 080 WTB-N 080 WTB-N 080 WTB-N 080 WTB-P 0809 WTB-P WTB-P 0800 WTB-P WTB-P Additional types on request SICK
14 Photoelectric proximity switch, WTB-, BGS, red light, teach-in Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing Commissioning by simple teach-in function Object detection almost irrespective of colour and background consistency Secure function when mounted opposite other sensors Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator yellow, status of received light beam LED indicator green, power on Teach button 7 ounting hole 8 Connector WTB-N WTB-P WTB-P WTB-N WTB-P WTB-N WTB-P x 0. mm² 8, -pin 8, -pin 8, -pin ET See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems WTB-N WTB-P x 0. mm² WTB-P 8, -pin ET SICK
15 W- WTB- N N N N P P P P P P Scanning distance typ. max. Operating distance... 0 mm... 0 mm Adjustment of operating distance Teach-in: single-teach button & cable ) Teach-in: single-teach button Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 7 mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, PNP antivalent Light-switching Complementary 00 ma Response time < 0. ms ) Switching frequency,000 Hz 7) Cable, PVC, m 8) VDE protection class Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 8) Connector, 8, -pin Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) External teach-in: impuls > s with voltage V s for PNP or for NPN ) Average service life 00,000 h at Ta = + C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load 7) With light/dark ratio : 8) Do not bend below 0 C Scanning distance (mm) Operating distance Scanning distance, max. typical Scanning range on black, % remission Scanning range on grey, 8 % remission Scanning range on white, 90 % remission % of scanning distance %/90% 0 0 8%/90% 90%/90% 0 (mm) Ordering information WTB-N WTB-N WTB-N WTB-N WTB-P 0890 WTB-P 0808 WTB-P 0808 WTB-P 0808 WTB-P 0808 WTB-P 0808 Additional types on request SICK
16 Photoelectric proximity switch, WTB-, BGS, IO-Link, teach-in Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing Object detection almost irrespective of colour and background consistency Reliable operation if devices are installed opposite each other Commissioning through simple teach-in function or IO-Link 8 7 Parameters and diagnostics via 9 IO-Link Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator yellow, status of received light beam LED indicator green, power on Teach button 7 ounting hole 8 Connector WTBC-P WTBC-P 8, -pin, -pin See Accessories chapter Connector,, -pin Connector, 8, -pin ounting systems /C /C SICK
17 W- WTBC- P P Scanning distance typ. max. Operating distance... 0 mm... 0 mm Adjustment of operating distance Teach-in: single-teach button Teach-in: via IO-Link Communication mode CO Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 7 mm at 0 mm distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs PNP, /C PNP, not Switching mode Light-switching ) Output current I a max < 00 ma Response time < 0. ms ) Switching frequency,000 Hz 7) Connector, 8, -pin Cable with plug,, -pin, PVC, 00 mm 8) VDE protection class Circuit protection V s connections reverse-polarity protected / All outputs short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Parametrisable via IO-Link ) Signal transit time with resistive load in switching mode. Different values possible in CO mode. 7) With light/dark ratio : in switching mode. Different values possible in CO mode. 8) Do not bend below 0 C Scanning distance %/90% Ordering information WTBC-P 0809 WTBC-P (mm) Operating distance Scanning distance, max. typical Scanning range on black, % remission Scanning range on grey, 8 % remission Scanning range on white, 90 % remission % of scanning distance 0 8%/90% 90%/90% 0 (mm) SICK 7
18 Photoelectric proximity switch, WTV-, BGS, red and infrared light, V-optics Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing Reliable detection of highly transparent and shiny objects at a distance of 0... mm High-precision setting of scanning distance thanks to -turn potentiometer Large, homogeneous light spot Adjustments possible Standard direction of the material being scanned Optical axis, receiver Optical axis, sender LED indicator yellow, status of received light beam LED indicator green, power on Potentiometer 7 ounting hole 8 Connector WTV-P WTV-P WTV-N WTV-P WTV-P WTV-N WTV-P WTV-P 8, -pin 8, -pin 8, -pin x 0. mm² See Accessories chapter Connector,, -pin Connector, 8, -pin Connector, 8, -pin ounting systems WTV-P, -pin 8 SICK
19 W- WTV- N N P P P P P P P Scanning distance typ. max. Operating distance Adjustment of operating distance... 0 mm... 0 mm Potentiometer, revolutions Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter Pinpoint LED, infrared light, 880 nm ) 0 mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, PNP antivalent Light-switching Complementary 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Cable, PVC, m 7) VDE protection class Circuit protection Connector, 8, -pin Connector, 8, -pin Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values Cable with plug, 8, -pin, PVC, 00 mm Cable with plug,, -pin, PVC, 0 mm V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Black-white shift/distance to background Background [mm] Distance Ordering information WTV-N 08 WTV-N 08 WTV-P WTV-P 08 WTV-P 08 WTV-P 08 WTV-P 09 WTV-P 08 WTV-P 098 Black-white shift 90 %/ % Distance to background detecting transparent objects SICK 9
20 Photoelectric proximity switch, WTB-, BGS, red light, line Scanning distance... 0 mm Photoelectric proximity switch Dimensional drawing Wide-angle light spot with an aperture of 0 Reliable detection of objects with slots and holes Reliable detection of grid structures Adjustments possible Direction of the sender light line Optical axis, sender Optical axis, receiver LED indicator yellow, status of received light beam LED indicator green, power on Potentiometer 7 ounting hole 8 Connector WTB-N7 WTB-P7 WTB-N7 WTB-P7 WTB-P7 WTB-N7 WTB-P7 8, -pin 8, -pin 8, -pin x 0. mm² See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems 0 SICK
21 W- WTB- N7 N7 N7 P7 P7 P7 P7 Scanning distance typ. max. Operating distance Adjustment of operating distance... 0 mm... 0 mm Potentiometer, revolutions Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter x 8 mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, PNP antivalent Light-switching Complementary 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Cable, PVC, m 7) VDE protection class Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 7) Connector, 8, -pin Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values Scanning distance and light spot width ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C (mm) Scanning range on white, 90 % reflectance Scanning range on black, % reflectance inimum detectable object Lightspot: line width [mm] Distance Ordering information WTB-N7 08 WTB-N7 08 WTB-N7 077 WTB-P7 08 WTB-P7 08 WTB-P7 090 WTB-P7 08 adjusted scanning distance 0 mm adjusted scanning distance 00 mm 0 % 0 % 8 8 Width of object 90 % 0 [mm] Distance to object Width of object 90 % 0 [mm] Distance to object SICK
22 Photoelectric proximity switch, WTB-, BGS, red light, in Teflon housing Scanning distance... 0 mm Dimensional drawing Photoelectric proximity switch Robust Teflon housing for use in wet and aggressive environments Suitable for food applications ø. ø Scanning distance set via teach-in wire Background suppression ø..8 Adjustments possible LED signal ounting hole Ø. mm Cable m, Ø. mm, m Teflon coated, Ø. mm Optical axis, receiver Standard direction of the material being scanned Optical axis, sender WTBT-N WTBT-P See Accessories chapter ounting systems x 0. mm² ET SICK
23 W- WTBT- N P Scanning distance typ. max. Operating distance... 0 mm... 0 mm Adjustment of operating distance Teach-in: External ) Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 7 mm at 0 mm distance Supply voltage V s DC V ) Ripple < Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Light-switching 00 ma Response time < ms ) < 0. ms ) Switching frequency 00 Hz 7),000 Hz 7) Cable, PVC/Teflon coating, m 8) VDE protection class Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP 8, IP 9K Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material PTFE/Teflon ) External teach-in: impuls > s with voltage V s for PNP or for NPN ) Average service life 00,000 h at Ta = + C ) Limit values ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load 7) With light/dark ratio : 8) Do not bend below 0 C Ordering information WTBT-N 0809 WTBT-P SICK
24 Photoelectric reflex switch, WLS-, autocollimation, light- and dark-switching Scanning range 0... m Photoelectric reflex switch Dimensional drawing. 7. Reliable function in restricted spaces thanks to autocollimation Small, easily visible, tightly defined light spot Robust mounting thanks to metal bushes Adjustments possible Optical axis ounting hole Connector LED signal strength indicator green: power on LED signal strength indicator orange: status of received light beam WLS-E0 WLS-F0 WLS-P0 WLS-P0 WLS-F0 WLS-P0 WLS-E0 WLS-N0 WLS-P0 See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems Reflectors 8, -pin 8, -pin 8, -pin x 0. mm² SICK
25 W- WLS- E0 E0 F0 F0 N0 P0 P0 P0 P0 Scanning range typ. max. Scanning range, recommended Relating to 0... m m Reflector PL80A Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter Polarisation filter mm at. m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, PNP antivalent Dark-switching Light-switching Complementary 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Cable, PVC, m 7) Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 7) Connector, 8, -pin Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Scanning range and operating reserve (m) Operating range Reflector type PL80A PL0F PL0A PL0F PL0F REF-IRF ,0,0,0,0 Scanning range max. typical Operating range m m m m m m.0 Function reserve 00 0 Scanning range max. typ. [mm] Distance Operating range Ordering information WLS-E0 007 WLS-E0 007 WLS-F0 00 WLS-F0 007 WLS-N0 007 WLS-P0 008 WLS-P0 009 WLS-P0 00 WLS-P SICK
26 Photoelectric reflex switch, WLS-, teach-in, autocollimation, light- and dark-switching Scanning range 0... m Photoelectric reflex switch Dimensional drawing. 7. Reliable function in restricted spaces thanks to autocollimation Small, easily visible, tightly defined light spot uick and easy commissioning through teach-in function Robust mounting thanks to metal bushes Adjustments possible Optical axis ounting hole Connector LED signal strength indicator green: power on LED signal strength indicator orange: status of received light beam Teach button WLS-E WLS-F WLS-N WLS-V WLS-E WLS-F WLS-P WLS-F x 0. mm² 8, -pin 8, -pin 8, -pin See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems Reflectors WLS-W x 0. mm² WLS-P 8, -pin Alarm Alarm SICK
27 W- WLS- E E F F F N P P V W Scanning range typ. max. Scanning range, recommended Relating to 0... m 0... m Reflector PL80A Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter Polarisation filter mm at. m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, PNP antivalent PNP, and alarm NPN, and alarm Dark-switching Light-switching Complementary 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Alarm output Pre-failure signalling output Cable, PVC, m 7) Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm 7) Connector, 8, -pin Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Teach-in function Programming via teach-in button. Easy programming: Position reflector in the beam path, press button, ready: LED confirms teach-in operation. Double reseve via switching threshold. Scanning range and operating reserve (m) Operating range Reflector type PL80A PL0A PL0A PL0F REF-IRF Operating range m m m m m.0 Scanning range, max. typical.0 Function reserve 00 0 Operating range Scanning range max. typical [mm] Ordering information WLS-E 008 WLS-E 0080 WLS-F 007 WLS-F 007 WLS-F 007 WLS-N 008 WLS-P 0077 WLS-P 0078 WLS-V 0079 WLS-W Distance SICK 7
28 Photoelectric reflex switch, WLGS-, for transparent objects Scanning range 0... m Photoelectric reflex switch Continuous adaptation of the switching threshold in case of lens contamination Stable operation thanks to temperature compensation Small, easily visible, tightly defined light spot uick and easy commissioning through teach-in function Detection of glass objects with an attenuation of > 8% Dimensional drawing. 8. A Adjustments possible A Optical axis ounting hole Connector LED signal strength indicator green: power on LED signal strength indicator orange: status of received light beam Teach button 7 WLGS-F WLGS-E WLGS-W WLGS-V 8, -pin x 0, mm² x 0, mm² 8, -pin ET Alarm Alarm WLGS-P WLGS-F WLGS-P WLGS-F See Accessories chapter Connector, 8, -pin ounting systems Reflectors 8, -pin 8, -pin 8, -pin ET 8 SICK
29 W- WLGS- E F V W P P F F Detection of transparent objects Attenuation along light beam > 8 % Scanning range typ. max. Scanning range, recommended Relating to Sensitivity adjustment 0... m 0... m Reflector PL80A Teach-in: single-teach button Teach-in: single-teach button & cable Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter Polarisation filter mm at. m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Dark-switching 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Alarm output Pre-failure signalling output Cable, PVC, m 7) Connector, 8, -pin, Cable with plug, 8, -pin, 00 mm 7) Cable with plug, 8, -pin, 00 mm 7) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Teach-in function Programming via teach-in button Standard mode (switching threshold adaptation): sensor adjusts the switching threshold to the ambient conditions. Sensor has clear sight of the reflector. No object in the beam path: press teach-in button for > s until yellow LED indicator lights up again. Sensor is ready to operate. Switch off switching threshold adaptation: sensor works statically with a switching threshold of 0 %. Sensor has clear sight of the reflector. No object in the beam path: press teach-in button for > 8s until yellow LED indicator flashes twice. Sensor is ready to operate. Scanning range and operating reserve (m) Operating range Reflector type PL80A PL0A PL0A PL0F REF-IRF Operating range m m m m m.0 Scanning range, max. typical.0 Function reserve 00 0 Operating range Scanning range max. typical [mm] Order information WLGS-E 008 WLGS-F 008 WLGS-V 0087 WLGS-W 008 WLGS-P 08 WLGS-P 089 WLGS-F 088 WLGS-F Distance SICK 9
30 Photoelectric reflex switch, WL-, red light, light- and dark-switching Scanning range m Photoelectric reflex switch Dimensional drawing Fast and safe alignment through high visibility light spot Fast commissioning. Connect, align, ready! Easy assembly in slots and guide rails Adjustments possible Centre of optical axis, sender Centre of optical axis, receiver LED signal strength indicator yellow: status of received light beam LED signal strength indicator green: power on ounting hole Connector WL-F0 WL-N0 WL-P0 WL-E0 WL-F0 WL-P0 WL-P0 WL-E0 WL-F0 WL-P0 See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems Reflectors 8, -pin 8, -pin 8, -pin x 0. mm² 0 SICK
31 W- WL- E0 E0 F0 F0 F0 N0 P0 P0 P0 P0 Scanning range typ. max. Scanning range, recommended Relating to m m Reflector PL80A Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter Polarisation filter 7 mm at. m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, PNP antivalent Dark-switching Light-switching 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Cable, PVC, m 7) Connector, 8, -pin Cable with plug, 8, -pin, 00 mm 7) Connector, 8, -pin Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Scanning range and operating reserve (m) Reflector type Operating range REF-IRF m PL0F PL0A PL0A PL80A m m m m 00 Operating reserve 0 Operating range Scanning range max. typical [m] Distance Ordering information WL-E0 08 WL-E0 088 WL-F0 08 WL-F0 08 WL-F0 08 WL-N0 080 WL-P0 08 WL-P0 08 WL-P0 087 WL-P SICK
32 Photoelectric reflex switch, WLG-, for transparent objects, with polarisation filter Scanning range m Photoelectric reflex switch Dimensional drawing Fast and safe alignment through high visibility light spot Detection of glass objects with an attenuation of > 8% Sensitivity setting via wire Adjustments possible Centre of optical axis, sender Centre of optical axis, receiver LED signal strength indicator orange: status of received LED signal strength indicator green: power on ounting hole Connector 7 Teach button 7 WLG-E WLG-E WLG-F WLG-P WLG-F WLG-E WLG-P x 0, mm² 8, -pin 8, -pin x 0, mm² ET ET See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems WLG-F WLG-F 8, -pin 8, -pin ET SICK
33 W- WLG- E E E F F F F P P Detection of transparent objects Attenuation along light beam > 8 % Scanning range typ. max. Scanning range, recommended Relating to Sensitivity adjustment m m Reflector PL80A Teach-in: single-teach button & cable Teach-in: single-teach button Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter Polarisation filter 7 mm at. m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Dark-switching Light-switching 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Cable, PVC, m 7) Connector, 8, -pin Connector, 8, -pin Cable with plug, 8, -pin, 00 mm 7) Cable with plug, 8, -pin, 00 mm 7) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Teach-in-Funktion Programming via teach-in button. Easy programming: Position reflector in the beam path, press button, ready: LED confirms teach-in operation. Two operating modes: Standard setting: short Teach-in period (< 8 s); for standard applications; approx. double reserve via switching threshold Fine adjustment: long Teach-in period (> 8 s); for precise applications, transparent objects. Small switching hysteresis. Scanning range and operating reserve (m) Reflector type Operating range REF-IRF m PL0F PL0A PL0A PL80A m m m m 00 Operating reserve 0 Operating range Scanning range max. typical Ordering information WLG-E 08 WLG-E 08 WLG-E 08 WLG-F 087 WLG-F 080 WLG-F 088 WLG-F 089 WLG-P 08 WLG-P 097 [m] SICK Distance
34 Photoelectric reflex switch, WLG-, for transparent objects, without polarisation Scanning range m Photoelectric reflex switch Dimensional drawing Fast and safe alignment through high visibility light spot Detection of PET bottles and foils with an attenuation of > 8% Sensitivity setting via wire Adjustments possible Centre of optical axis, sender Centre of optical axis, receiver LED signal strength indicator orange: status of received light beam LED signal strength indicator green: power on ounting hole Connector 7 Teach button 7 WLG-E8 WLG-P8 WLG-F8 WLG-P8 WLG-F8 WLG-E8 WLG-N8 x 0, mm² 8, -pin 8, -pin x 0, mm² ET ET See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems WLG-F8 8, -pin SICK
35 W- WLG- E8 E8 F8 F8 F8 N8 P8 P8 Detection of transparent objects Attenuation along light beam > 8 % Scanning range typ. max. Scanning range, recommended Relating to Sensitivity adjustment m m Reflector PL80A Teach-in: single-teach button & cable Teach-in: single-teach button Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 80 mm at. m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Dark-switching 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Cable, PVC, m 7) Cable, PVC, m 7) Connector, 8, -pin Connector, 8, -pin Cable with plug, 8, -pin, 00 mm Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C Teach-in function Programming via teach-in button. Easy programming: Position reflector in the beam path, press button, ready: LED confirms teach-in operation. Two operating modes: Standard setting: short Teach-in period (< 8 s); for standard applications; approx. double reserve via switching threshold Fine adjustment: long Teach-in period (> 8 s); for precise applications, transparent objects. Small switching hysteresis. Scanning range and operating reserve (m) Reflector type Operating range PL0F m PL0A PL0A PL80A m m m 00 0 Function reserve [m] Operating range Scanning range typ. max WLG Ordering information WLG-E8 080 WLG-E8 088 WLG-F8 08 WLG-F8 087 WLG-F8 08 WLG-N8 009 WLG-P WLG-P SICK
36 Through-beam photoelectric switch, WSES-, red light, light- and dark-switching Scanning range 0... m Through-beam photoelectric Dimensional drawing. 7. Fast and reliable alignment through brilliant light spot Assembly of several pairs in tight environments due to a tightly defined small light spot Robust mounting thanks to metal bushes Adjustments possible Centre of optical axis LED signal strength indicator orange: status of received light beam LED signal strength indicator green: power on ounting hole Connector WSES-E0 WSES-F0 WSES-P0 WSES-F0 WSES-E0 WSES-F0 WSES-N0 Sender 8, -pin 8, -pin x 0. mm² See Accessories chapter Connector, 8, -pin ounting systems TE TE TE Receiver 8, -pin 8, -pin x 0. mm² SICK
37 W- WSES- E0 E0 F0 F0 F0 N0 P0 Scanning range typ. max. Scanning range, recommended 0... m m Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 0 mm at.0 m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption, sender Power consumption, receiver Switching outputs Switching mode Output current I a max 0 ma 0 ma NPN, PNP, Dark-switching Light-switching 00 ma Response time. ms ) Switching frequency 00 Hz ) Test input sender off TE to 0 V Cable, PVC, m ) Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm ) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C Scanning range and operating reserve 0. 0 (m) Operating range Scanning range typ. max WSES- Ordering information WSES-E0 009 WSES-E0 009 WSES-F WSES-F WSES-F WSES-N0 009 WSES-P0 009 Operating reserve Operating range [m] Distance SICK 7
38 Through-beam photoelectric switch, WSE-, red light, light- and dark-switching Scanning range 0... m Through-beam photoelectric Dimensional drawing Fast and safe alignment through high visibility light spot Fast commissioning. Connect, align, ready! Easy assembly in slots and guide rails Adjustments possible Centre of optical axis LED signal strength indicator orange: status of received light beam LED signal strength indicator green: power on ounting hole Connector WSE-F0 WSE-P0 WSE-P WSE-F0 WSE-F WSE-P0 WSE-P0 WSE-E0 WSE-F0 WSE-N0 Sender 8, -pin 8, -pin 8, -pin x 0. mm² TE TE NC TE TE See Accessories chapter Connector, 8, -pin Connector, 8, -pin ounting systems Receiver 8, -pin 8, -pin 8, -pin x 0. mm² 8 SICK
39 W- WSE- E0 F0 F0 F F0 N0 P0 P0 P0 P Scanning range typ. max. Scanning range, recommended Sensitivity adjustment 0... m m Potentiometer, revolutions Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 0 mm at m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption, sender Power consumption, receiver Switching outputs Switching mode Output current I a max 0 ma 0 ma NPN, PNP, PNP Dark-switching Light-switching Complementary 00 ma Response time > 0. ms ) Switching frequency,000 Hz ) Test input sender off TE to 0 V Cable, m ) Connector, 8, -pin Cable with plug, 8, -pin, PVC, 00 mm ) Connector, 8, -pin ) Connector, 8, -pin Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP, IP 7 Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material Bayblend, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C Scanning range and operating reserve 000 WSE (m) 00 Operating range Scanning range typ. max. Operating reserve 0 [m] Distance Ordering information WSE-E0 087 WSE-F0 088 WSE-F0 087 WSE-F 0 WSE-F WSE-N0 08 WSE-P0 08 WSE-P0 080 WSE-P0 08 WSE-P SICK 9
40 Through-beam photoelectric switch, WSE-, red light, in Teflon housing Scanning range 0... m Dimensional drawing Through-beam photoelectric Robust Teflon housing for use in ø. ø wet and aggressive environments Suitable for food applications. 7 Test input ø..8 Adjustments possible LED signal ounting hole Ø. mm Cable m, Ø. mm, m Teflon coated, Ø. mm Optical axis, sender und receiver WSET-E0 WSET-F0 WSET-P0 Sender x 0. mm² TE See Accessories chapter ounting systems Receiver x 0. mm² 0 SICK
41 W- WSET- E0 F0 P0 Scanning range typ. max. Scanning range, recommended 0... m m Light source, light type Pinpoint LED, red light, 0 nm ) Light spot diameter 0 mm at m distance Supply voltage V s DC V ) Ripple Vss ) Power consumption, sender Power consumption, receiver Switching outputs Switching mode Output current I a max 0 ma 0 ma NPN, PNP, Dark-switching Light-switching 00 ma Response time > 0. ms ) Switching frequency,000 Hz ) Test input sender off TE to 0 V Cable, m ) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP 8, IP 9K Ambient temperature operation 0 C C Ambient temperature storage 0 C C Weight Ca. 0 g Housing material PTFE/teflon, PA ) Average service life 00,000 h at Ta = + C ) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A ) ay not exceed or fall short of V s tolerances ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C Scanning range and operating reserve 0. 0 (m) Operating range Scanning range, max. typical 00 0 Ordering information WSET-E0 098 WSET-F0 097 WSET-P0 09 Operating reserve Operating range Scanning range, max. typ. (m) SICK
W 4-3 miniature photoelectric switch family: Efficient and space-saving
Product group W - BGS Photoelectric proximity switch Photoelectric reflex switch W - miniature photoelectric switch family: Efficient and space-saving influence of environmental effects! Whether humidity
More informationW27-3: The all-rounder: robust, powerful, very wide range of applications
W- Photoelectric switches BGS Photoelectric proximity switches Photoelectric reflex switches Through-beam photoelectric switches W-: The all-rounder: robust, powerful, very wide range of applications speed
More informationW 2: Subminiature photoelectric switch series: extremely small and extremely strong
W Photoelectric switches Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches W : Subminiature photoelectric switch series: extremely
More informationW 2: Sub-Miniature Photoelectric Switch Range: Super-Small and Powerful
W Photoelectric switches Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches W : Sub-iniature Photoelectric Switch Range: Super-Small
More informationsuppression, insensitive to optical interference, sensor E photoelectric switch, areas Zone 2 (gas) and Zone 22 (non-conductive dust).
KD0_Ex_D_G_en.qxd 0.08.00 Photoelectric proximity switches BGS Photoelectric reflex switches Through-beam photoelectric switches 0:8 Uhr Seite 08 Ready-to-fit and Standardcompliant - Cat. D/G Photoelectric
More informationWL 4-2 Photoelectric reflex switches, red light, dark-switching -- DC
WL - Photoelectric reflex switches, red light, dark-switching -- DC Scanning range.8 m Photoelectric reflex switches Dimensional drawing Insensitive to ambient light sources (HF lamps, flashing warning
More informationWT190T: The convenient, reliable proximity switch precisely the right one for challenging applications
W90T Photoelectric switches FGS Photoelectric proximity switch BGS Photoelectric proximity switch WT90T: The convenient, reliable proximity switch precisely the right one for challenging applications TThe
More informationV 12-2 Miniature photoelectric switches: innovations in M12 housings
V - Photoelectric switches Photoelectric proximity switches Photoelectric reflex switches Through-beam photoelectric switches V - iniature photoelectric switches: innovations in housings The V - optic
More informationW 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
More informationSICK laser competence in photoelectric switches
Laser photoelectric switches SICK laser competence in photoelectric switches WTL Laser sensors with high beam quality at distances of up to m. WL- Best performance in a metal housing. The original proven
More informationPhotoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
More informationW 27-3: The all-rounder: robust, powerful, very wide range of applications
Product group W- BGS Photoelecric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W -: The all-rounder: robust, powerful, very wide range of applications speed of set up:
More informationW 27-3: The all-rounder: robust, powerful, very wide range of applications
Product group W - BGS Photoelectric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W -: The all-rounder: robust, powerful, very wide range of applications speed of set up:
More informationV 18 Laser No frills performance: long ranges, high speeds with precision
V 8 Laser No frills performance: long ranges, high speeds with precision VTE 8 L photoelectric proximity switches: energetic type, scr. mm (9 % remission). Additional standard features: very short response
More informationW4S-3 Inox Photoelectric Switch Family
DATA SHEET WS- Inox Photoelectric Switch Family Smaller, tougher, better Best optical performance in a robust stainless steel housing WTBS- Inox, BGS 80 mm, Teach-in via wire Scanning distance... 80 mm
More informationW 250: Compact photoelectric switch series for a broad range of applications
W 0 Photoelectric switches Photoelectric proximity switches, GS Photoelectric reflex switches Through-beam photoelectric switches W 0: Compact photoelectric switch series for a broad range of applications
More informationWLL 170 Photoelectric switches with fibre-optic cable, red light, manual sensitivity adjustment -- DC. Dimensional drawing R1.6 2-R
WLL 0 Photoelectric switches with fibre-optic cable, red light, manual sensitivity adjustment -- DC 0... 0 mm Through-beam systems Dimensional drawing R. -R. Scanning distance 0... 0 mm. Proximity systems
More informationW12-3: More robust, more accurate, more intelligent
W-: More robust, more accurate, more intelligent W- is protected effectively from electromagnetic fields. W- adapts to your system. Rotatable plug or cable connections provides increased mounting options,
More informationProduct description. At a glance. performance in a metal housing coating available Precise autocollimation optics. sensors
W- Laser Small photoelectric sensors W High-performance photoelectric sensor family with laser optics Product description At a glance performance in a metal housing coating available Precise autocollimation
More informationW 150: Miniature photoelectric switch series with completely integrated electronics
W 0: iniature photoelectric switch series with completely integrated electronics Special mechanical engineering tasks. The W 0 optics systems and their ranges: WS/WE 0 through-beam photoelectric switch:.
More informationW27-3: The all-rounder: robust, powerful, very wide range of applications
Product group W- BGS Photoelectric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W-: The all-rounder: robust, powerful, very wide range of applications unwanted optical
More informationW140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges
Product group W0- BGS Photoelectric proximity switch Energ. Photoelectric proximity switch Photoelectric reflex switch W0-: iniature Photoelectric Switch Series with Large Scanning Ranges The integrated
More informationContrast scanners detect the little differences
KT /KT Contrast scanners Contrast scanners Contrast scanners detect the little differences Adjustment of the standard version is carried out manually. The contrast scanner has an integrated adjustment
More informationV 18 Laser No frills performance: long ranges, high speeds with precision
V 8 Laser No frills performance: long ranges, high speeds with precision VTE 8 L photoelectric proximity switches: energetic type, scr. 00 mm (90 % remission). Additional standard features: very short
More informationW 280: Powerful sensors for standard applications
W 80 Photoelectric switches Photoelectric proximity switches, energetic Photoelectric reflex switches W 80: Powerful sensors for standard applications Through-beam photoelectric switches The devices with
More informationOnline data sheet. WLG190T-P420 W190 Laser High Grade Glass PRODUCT PORTFOLIO
Online data sheet WLG90T-P420 W90 Laser High Grade Glass WLG90T-P420 W90 Laser High Grade Glass A B C D E F Illustration may differ Ordering information Type Part no. WLG90T-P420 602280 Other models and
More informationOnline data sheet. WTB4S-3P1132V W4S-3 Inox MINIATURE PHOTOELECTRIC SENSORS
Online data sheet WTB4S-3P1132V W4S-3 Inox A B C D E F Illustration may differ Ordering information Type Part no. WTB4S-3P1132V 46402 Other models and accessories www.sick.com/w4s-3_inox H I J K L M N
More informationMH 15: Short housing, clever mounting for smart solutions
H : Short housing, clever mounting for smart solutions HL photoelectric reflex switch:.0 m/. m (PL 80 A), with polarizing filter. HT photoelectric proximity D ATA S H E E T switch, energetic, scanning
More informationW 140: Miniature Photoelectric Switch Series with Large Scanning Ranges
W : iniature Photoelectric Switch Series with Large Scanning Ranges Photoelectric proximity switch with adjustable scanning distance and background suppression (BGS): Scanning distance = adjustable up
More informationMH15 Cylindrical Photoelectric Sensors
DATA SHEET H Cylindrical Photoelectric Sensors Short and fl ush: A short housing for fl ush mounting The H photoelectric sensor series concentrates on the essential. The H, offers the following optical
More informationW 140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges
BGS Photoelectric proximity switches Photoelectric proximity switches energetic Photoelectric reflex switches Through-beam photoelectric switches W 0-: iniature Photoelectric Switch Series with Large Scanning
More informationPHOTOELECTRIC SENSORS. Online data sheet
Online data sheet A B C D E F Illustration may differ Ordering information Type Part no. WTB4SL-3P6V 0585 Other models and accessories www.sick.com/w4sl-3v H I J K L M N O P R S T Detailed technical data
More informationProduct description. At a glance. IP 69K-rated cylindrical photoelectric sensors in M18 stainless steel housing Resistant to all common cleaning
V8V Cylindrical photoelectric sensors V8 Cylindrical photoelectric sensors with foolproof touch-teach for washdown areas Product description The V8V has a chemical and pressure cleaning resistant housing
More informationW 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
More informationDS500/DT500 Laser sensor measures distances to 30 m on black material in proximity mode
DS00/DT00 Laser sensor measures distances to 0 m on black material in proximity mode DS00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects even
More informationOnline data sheet VT12T-2P410 V12-2 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTT-P0 V- A B C D E F Illustration may differ Ordering information Type Part no. VTT-P0 606 Other models and accessories www.sick.com/v- H I J K L M N O P Q R S T Detailed technical data
More informationW 140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges
BGS Photoelectric proximity switches Photoelectric proximity switches energetic Photoelectric reflex switches Through-beam photoelectric switches W 0-: iniature Photoelectric Switch Series with Large Scanning
More informationW 160T: With the smallest LED light spot
W 0T: With the smallest LED light spot BGS Photoelectric proximity switches Photoelectric proximity switches mark sensor Photoelectric proximity switches energetic Photoelectric reflex switches SSystem
More informationW4S-3 Inox: Smaller, stronger, better
P R O D U C T I N F O R M AT I O N W4S-3 Inox: Smaller, stronger, better The most advanced photoelectric switch series in its class Best-in-class for exacting requirements W4S-3 Inox simply unbeatable
More informationOnline data sheet. WTB190TL-P460 W190 Laser High Grade PRODUCT PORTFOLIO
Online data sheet WTB90TL-P460 W90 Laser High Grade WTB90TL-P460 W90 Laser High Grade A B C D E F Illustration may differ Ordering information Type Part no. WTB90TL-P460 60646 Other models and accessories
More informationContrast Sensors. SICK The pioneer in contrast sensors for more than 60 years
P r o d u c t i n f o r m at i o n Contrast Sensors SICK The pioneer in contrast sensors for more than 60 years Top products Contrast sensors They put registration marks into a proper light SICK contrast
More informationOnline data sheet WSE9LC-3P2436A00 W9L-3
Online data sheet WSE9LC-3P2436A00 W9L-3 A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. WSE9LC-3P2436A00 1080958 Other models and accessories www.sick.com/w9l-3 Illustration may
More informationOnline data sheet VTF18-4N1212 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTF8-4N V8 A B C D E F Illustration may differ Ordering information Type Part no. VTF8-4N 6080 Other models and accessories www.sick.com/v8 H I J K L M N O P R S T Detailed technical
More informationOnline data sheet VL18-4N3112 V18 PRODUCT PORTFOLIO
Online data sheet VL8-4N V8 VL8-4N V8 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Sensor/ detection principle Housing design (light emission) Housing
More informationOnline data sheet WT34-B410 W34 PRODUCT PORTFOLIO
Online data sheet WT4-B40 W4 A B C D E F WT4-B40 W4 Illustration may differ Ordering information Type Part no. WT4-B40 099 Other models and accessories www.sick.com/w4 H I J K L M N O P Q R S T Detailed
More informationOnline data sheet WT34-V220 W34 PRODUCT PORTFOLIO
Online data sheet WT4-V0 W4 A B C D E F WT4-V0 W4 Illustration may differ Ordering information Type Part no. WT4-V0 098 Other models and accessories www.sick.com/w4 H I J K L M N O P Q R S T Detailed technical
More informationOnline data sheet. WTR2-P521 ZoneControl PHOTOELECTRIC SENSORS
Online data sheet WTR2-P521 ZoneControl A B C D E F Illustration may differ Ordering information Type Part no. WTR2-P521 1015074 Other models and accessories www.sick.com/zonecontrol H I J K L M N O P
More informationOnline data sheet VT12T-2N112 V12-2 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTT-N V- A B D E F Illustration may differ Ordering information Type Part no. VTT-N 60609 Other models and accessories www.sick.com/v- H I J K L M N O P R S T Detailed technical data
More informationDS 500/DT 500 Laser sensor measures distances to 18 m on black material in proximity mode
AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : 0..0.0. - Fax : 0..0.8.0 - Web : http: www.audin.fr - Email : info@audin.fr DS 00/DT 00 Laser sensor measures distances to 8 m on black
More informationRetro-reflective sensors for bottles and tape. Dimensioned drawing
Retro-reflective sensors for bottles and tape Dimensioned drawing en 01-2013/11 50121193 10-30 V DC 0 4.8m 1,5 khz Retro-reflective photoelectric sensors with autocollimation optics for reliable detection
More informationDATA SHEET. OD Precision. Displacement sensors for precise and comprehensive measurement tasks
DATA SHEET OD Precision Displacement sensors for precise and comprehensive measurement tasks OD Precision Displacement sensors for precise and comprehensive measurement tasks Displacement sensors from
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationLeuze electronic. Throughbeam photoelectric sensor. Dimensioned drawing. Electrical connection. Accessories: ISO 9001 IP 67
LS 303 Throughbeam photoelectric sensor Dimensioned drawing 1 khz 7m 10-30 V DC A 2 LS l A²LS - active suppression of extraneous light l Activation input for functional testing l Complementary outputs
More informationOnline data sheet WL34-R230 W34 COMPACT PHOTOELECTRIC SENSORS
Online data sheet WL34-R30 W34 A B C D E F Illustration may differ Ordering information Type Part no. WL34-R30 0949 Other models and accessories www.sick.com/w34 H I J K L M O P Q R S T Detailed technical
More informationUltramini clever reliability in confined quarters. Simple installation and operation
Series OU Ultramini clever reliability in confined quarters m Through-beam sensors OUS/OUE up to, m Retro-reflective sensors OUR up to, m Retro-reflective sensors with polarizing filters OUP and OUC up
More informationLeuze electronic. 3 Series. Product description
3 Series Product description Contents: 3 Series - overview and advantages Special features of Series 3 Sensor selection table Data sheets All rights reserved, especially the rights of copying and translation.
More informationCS Colour sensors: When it s the colour that counts
CS Colour sensors Colour sensors CS Colour sensors: When it s the colour that counts A brief description of the process: an object is illuminated using light of varying spectral composition. The light
More informationOnline data sheet. RT-P3221 ZoneControl PHOTOELECTRIC SENSORS
Online data sheet RT-P3221 ZoneControl A B C D E F Illustration may differ Ordering information Type Part no. RT-P3221 1063129 Other models and accessories www.sick.com/zonecontrol H I J K L M N O P Q
More informationOnline data sheet WL260-S270 W260 PRODUCT PORTFOLIO
Online data sheet WL0-S70 W0 WL0-S70 W0 A B C D E F Illustration may differ Ordering information Type Part no. WL0-S70 0077 Other models and accessories www.sick.com/w0 H I J K L M N O P Q R S T Detailed
More informationOnline data sheet WS/WE260-R270 W260 PRODUCT PORTFOLIO
Online data sheet WS/WE60-R70 W60 WS/WE60-R70 W60 A B C D E F Illustration may differ Ordering information Type Part no. WS/WE60-R70 60077 Other models and accessories www.sick.com/w60 H I J K L M O P
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationUC4 Small. Precise. Ultrasonic!
PRODUCT informati O n UC Small. Precise. Ultrasonic! Reliable detection, independant of colour and surface. AUDIN - 8, avenue de la malle - 570 Saint Brice Courcelles - Tel : 0.6.0.0. - Fax : 0.6.0.8.0
More informationDS500/DT500 Laser sensor measures distances to 30 m on black material in proximity mode
DS00/DT00 Laser sensor measures distances to 0 m on black material in proximity mode DS00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects even
More informationWFS Fork Sensors. Agile and flexible ideal mounting for labeling applications. P r o d u c t I n f o r m at i o n
P r o d u c t I n f o r m at i o n Fork Sensors Agile and flexible ideal mounting for labeling applications Agile and flexible ideal mounting for labeling applications Product description At a glance Optimized
More informationMLV40 Series Miniature Sensors
MLV4 Series Miniature Sensors Diffuse Mode See page 54 Features: Adjustable sensitivity Complementary outputs Sensing Range: 5 mm Outputs: NPN, PNP Thru-Beam Mode See page 57 Rugged metal housing Compact
More informationLaser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en_50114049.fm en 03-2013/08 50114049 10-30 V DC 2 khz 10 400(500)mm 170(250)mm with black/white
More informationLaser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049 10-30 V
More informationDistance sensors. System description. Distance measurement using triangulation
Distance sensors System description Distance measurement using triangulation The measurement principle of optical triangulation is suitable for the precise determination of distances at close range. With
More informationElectrical connection
Diffuse reflection light scanners with fading Dimensioned drawing We reserve the right to make changes DS_FT318BI_en_50127492.fm en 03-2015/09 50127492 10-30 V DC A 2 LS 500 Hz 1 280mm Diffuse reflection
More informationMLV12 Series Dura-Vue TM Sensors
MLV Series Dura-Vue TM Sensors Diffuse Mode with Background Evaluation See page 5 Reliable detection of all surfaces regardless of color or shape Cross-talk immunity Sensing Range: 5 mm Output: -in- Retro-Reflective
More informationVLL 18T; M 18 photoelectric switches, for LL 3 fibre-optic cables: economic, flexible, functional
flexible positioning, increased temperatures, chemical resistance, etc. a suitable plastic LL fibre-optic cable is the solution. M 8, compatible housing for many solutions with appropriate basic principles
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
More informationSensors for PET, glass and foil PRODUCT DESCRIPTION
Sensors for PET, glass and foil PRODUCT DESCRIPTION Contents: PET, glass, foil sensors: Overview and advantages PET, glass, foil sensors: Special features PET, glass, foil sensors: Selection table PET,
More informationThroughbeam photoelectric sensors. Dimensioned drawing. Transmitter/receiver Optical axis LED yellow 90 turning connector. Electrical connection
Specifications and description Leuze electronic LSR 8 Throughbeam photoelectric sensors Dimensioned drawing,5 khz 0-30 V DC A 2 LS A²LS - active suppression of extraneous light Push-pull switching outputs
More informationOnline data sheet WT260-R260 W260 PRODUCT PORTFOLIO
Online data sheet WT60-R60 W60 A B C D E F Illustration may differ Ordering information Type Part no. WT60-R60 60097 Other models and accessories www.sick.com/w60 H I J K L M N O P Q R S T Detailed technical
More informationDS 500/DT 500 Laser sensor measures distances to 18 m on black material in proximity mode
DS 00/DT 00 Laser sensor measures distances to 8 m on black material in proximity mode DS 00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects
More informationE3Z-LS. Distance-settable Photoelectric Sensor. Ordering Information. Sensors. Accessories (Order Separately)
Distance-settable Photoelectric Sensor Switching between background and foreground suppression (BGS/FGS) enables detecting a variety of objects under various background/foreground conditions. Influence
More informationElectrical connection
Reflection light scanner with fading Dimensioned drawing We reserve the right to make changes DS_FT318_en_50123664.fm en 03-2015/09 50123664 10-30 V D 2 LS 500 Hz 1 280mm 2 120mm (with 90 angular optics)
More informationOnline data sheet NT NT8 CONTRAST SENSORS
Online data sheet NT8-02412 NT8 A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Dimensions (W x H x D) Ordering information Other models and accessories Sensing distance 9 mm 1)
More informationMaking Industries Smarter
Making Industries Smarter The Next Generation of Photoelectronic Sensors Sensors are the most important components of machines. Dr. Alexander Ohl Director of Development, wenglor sensoric Technology Communication
More informationLUT2 Luminescence scanner
LUT Luminescence scanner Dimension illustration 0. Switching threshold adjustment for low fluorescence Static teach-in to mark and/or background via control cable or control panel on unit Switching frequency
More informationOD Max and OD Max Transparent displacement sensors highly accurate, non-surface dependent distance measurement
OD Max and OD Max Transparent displacement sensors highly accurate, non-surface dependent distance AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : 0..0.0. - Fax : 0..0.8.0 - Web : http:
More informationPD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description
Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer
More informationK AS-Interface. K Test input
U RL.-/... Reflection light beam switch with polarisation filter RL.-/... with terminal compartment K Detection range up to 8 m, optional 4 m K Compact construction K Light/dark switch RL--ASI/3 K Sensitivity
More informationCompact Photoelectric Sensor
CX-00 Photoelectric s Compact Photoelectric The CX-00 series of photoelectric sensors is a wide-ranging lineup of 116 different models. Whatever your application entails, SUNX has covered it with this
More informationUltrasonic sensors. Reliable on almost all surfaces. UT 20 from Page 548. UT 12 from Page 564. UT/UM 18 from Page 568
Ultrasonic sensors Reliable on almost all surfaces UT 0 from Page 58 UT from Page 56 UT/UM 8 from Page 568 UT 0-S miniature ultrasonic sensors with soundpipe Reliable detection through the smallest of
More informationM18 DC Photoelectric Switches FA
Compact M18 barrel type photoelectric switches for DC operation. Complete series of M18 photoelectric sensors, 10-30VDC Models with axial and 90 degree optics Models with IR, red light and red light laser
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationA finger on the pulse of time
A finger on the pulse of time F 55 long-range compact light time-of-flight sensors Optical sensors Ultrasonic sensors Inductive sensors Capacitive sensors Vision sensors and systems The multi-talent for
More informationin one housing (3). The light beam is reflected by a reflector (4). The objects are detected by interruption of the light beam.
This info card serves as a supplement to the main position sensors catalogue and to the individual data sheets. For further information and contact addresses please visit our homepage at www.ifm. com.
More informationDiffuse reflection light scanner with background suppression. Dimensioned drawing
Leuze electronic HRT 8 Diffuse reflection light scanner with background suppression Dimensioned drawing 1 khz 5 4mm 1-3 V D 2 LS Detection of shining objects djustable background suppression ²LS - active
More information5-pole M12 connector. Connecting cable: cab-m12/5-g-2m. LED (red) for dirt accumulation indication
D-LAS Series D-LAS-34-ED-25x2-AC-T (Glass Pane Detection) - Collimated laser beam (
More informationClass II. Sensing method Appearance Connection Sensing distance Output function Model method NPN output PNP output mm.
Distance-settable Photoelectric Sensor FC-AL Distance-settable Photoelectric Sensor with Background Suppression and Visible Laser Beam Reliable background suppression detection, even of shiny objects Detection
More information5-step-switch for adjustment of sensitivity (switching threshold) LED (super-bright, yellow) for switching state indication.
D-LAS Series D-LAS-24/90-ED-(16)-AC-T (Glass Pane Detection) - Collimated laser beam (
More informationDMH: Multidimensional sensors for a wide variety of height detection tasks
DMH Light section sensors DMH Standard DMH Shingle counters DMH: Multidimensional sensors for a wide variety of height detection tasks of light on the receiver array. The line of light hitting an object
More informationM12 Metal. Photoelectric Standard Sensors BOS 12M Global
Standard Sensors Simplification with potential Our BOS 12M series are in a fully potted metal housing with IP 67 degree of protection have been optimized for typical applications. Their installation also
More informationLaser light scanner with background suppression. Dimensioned drawing
Dimensioned drawing We reserve the right to make changes DS_HT10_2M_en_0130293.fm en 01-201/09 0130293 18-30 V DC 0 2000mm The laser light scanner, based on the principle of light propagation time measurement,
More informationREMOTE SENSOR SERIES. Description
REMOTE SENSOR SERIES Telco s remote sensor series can always be depended on to do the job. Although simple in design and modest in size, nothing performs more reliably in hostile environments and challenging
More informationQL55 Series Luminescence Sensor
Self-contained, microprocessor-based luminescence sensor Features Self-contained design in a robust, compact metal housing High sensitivity Microprocessor-controlled Senses luminescent marks, even on luminescent
More information