EGS Computers India Private Limited Chennai, Coimbatore, Trichy
|
|
- Amy Carr
- 5 years ago
- Views:
Transcription
1 White Paper on Geometric Dimensioning & Tolerancing with Tolerance Stack-Up Analysis EGS Computers India Private Limited Chennai, Coimbatore, Trichy Web: Tel: /
2 Summary Profitability and Cost Reduction objectives of Manufacturing organizations are directly influenced by Drawings. Completeness and Correctness of Drawings are essential to avoid Re-work and ambiguity. Effect of part tolerances on assembly build objectives and allocation of Tolerances using Least-Cost approach for achieving assembly functionality, form the heart of any product development process. It is necessary that Tolerance Studies are conducted to understand product variations that result in rejections. Such Tolerance analyses would be useful in identifying Process deviations that culminate in assemblies going out of specification. GD & T with Tolerance Analysis would go a long way in helping organizations stay profitable while striving to achieve 0 PPM. In today's economic scenario, this approach is certain to ensure Profitability and improve Reliability without imposing a cost penalty. This is a necessity involved in manufacturing products ranging from limited volume to high volume production. Importance of GD & T ASME Y 14.5 has evolved into a Standard on Geometric Dimensioning and Tolerancing, accepted by Manufacturing organizations world-wide. While providing a structured approach to part dimensioning, The Standard, emphasizes on the correctness and completeness of developing drawings for Parts and assemblies. With part drawings adhering to Standard, it ensures that the Manufacturing Team and Inspection Team speak the same language and understand the Design Specifications that the Design Team intended to convey. By eliminating ambiguity, following advantages are imminent: 1. Reduction in art to part transformation time 2. Elimination of Re-work 3. Elimination of Assembly Build Issues 4. Elimination of incorrect interpretations and assumptions 5. Lowering of product cost 6. Improvement in Product reliability 3D CAD and GD & T: There is no better place than 3D CAD to start implementing GD & T. Software such as SolidWorks have 3D Annotation capabilities that are compliant with Y : Digital Product Data Definition Practices. By offering a choice between Plus / Minus Tolerancing and GD & T based Tolerancing, SolidWorks enables the users to adhere to the ANSI/ ISO Standards while developing drawings. DimXpert, inside SolidWorks, helps the designers to workout the Dimensional schematic early in the design process, thereby ensuring correctness of representation. Optional settings for Fine, Coarse, Medium tolerance specifications assists the designer in providing tolerance values and ranges based on Industry Best Practices. Additionally, default tolerance values can be logically set based on feature representation to aid in adhering to Company standards for acceptance tolerance levels for least cost. Redundant Dimensions and Tolerances are eliminated. Adhering to ASME/ ISO standards also ensures that Material Modifiers, their applicability based on Geometric Characteristic Symbols employed either in the Feature or as applied to Datum Features of Sizes, are incorporated for least cost tolerancing strategies. 2
3 Fig. 1: 3D Part Design Fig. 2: DimXpert Visual Detection of Completeness of Part Dimensioning Fig. 3: 3D Annotations for complete Product Definition using GD & T In the example shown above, the visual color coding (Green Complete, Yellow Under defined, Red Over Defined or In Conflict) of Features as shown in Fig. 2, helps ensuring completeness of representation. 3D Annotations developed using DimXpert are shown in Fig. 3. These annotations can be directly imported into Drawing views for rapid Drawing development. In addition to reducing time and effort, this practice ensures that downstream errors during Drawing development are avoided. DimXpert also provides Warnings and insights into Lack of definition or Inappropriate Definition of Feature control frames, size definitions, Datum definitions among other parameters to ensure correctness of drawings at every stage of the design process. This helps streamline drawing generation procedure without being person specific and goes a long way in achieving standardization of Best Practices in Design and Drawing Development. 3
4 Tolerance Analysis GD & T Drawings convey Design Specifications evolved from Design Intent in an unambiguous manner to the Manufacturing and Inspection Teams. Often the Designer is beset with the problem of allocating appropriate tolerances at the part definition stage. The implications of the tolerances specified at part level, in assembly build is never known. This affects assembly build, assembly functionality as well as increases rejections that affect profitability of the organization. Viewed in a different way, if assembly level tolerances for functional requirements are known, range and contribution of individual part dimensions need to be evolved with emphasis on low-cost tolerancing strategies. SigmundWorks, integrated inside SolidWorks, performs just that to help designers arrive at optimal tolerances to ensure assemblies work all the time. Benefits of Tolerance analysis using SigmundWorks are many-fold: Understanding how part level tolerances affect Assembly Build Allocating part level tolerances for required Assembly Build Determining part level tolerances that influence Assembly Build in terms of cost Influence of dimensional changes such as thermal expansion in functionality Interaction with parametric SolidWorks Dimensional scheme to identify contributors as well as updating tolerances to achieve Assembly objectives Least cost tolerancing based on weighing factors Designing for Six Sigma without compromising on Cost Identifying causes for parameters that affect Process deviations resulting in rejections Estimate rejections based on RSS, Worst-Case, Process Centred RSS, Monte-Carlo simulations to achieve 0 PPM Tolerance Analysis by example Fig. 4: Assembly Clearance Study In the assembly shown, the clearance needs to be maintained within a specified range to meet functional requirements. First step towards performing Tolerance Analysis would be to identify the vector loop of dimensional chain that would affect assembly build. This can be done manually, by selecting Dimensions defined using DimXpert, inside SolidWorks, or automatically allow SigmundWorks to identify and create the loop. Either way, this vector loop is based on the GD & T Scheme employed during the part dimensional definition process. 4
5 Fig. 5: Vector Loop Diagram of Dimensional Chain Fig. 6: Tree definition for Vector Loop based on nodes The vector loop logic and the Nodal tree map with appropriate sign (additive or subtractive depending on the direction of the vector loop entities) are shown. Note that the Cap subassembly forms a separate sub-node with associated dimensions represented underneath. This is a powerful method to employ SigmundWorks to a complex Dimensional chain involving multiple sub-assemblies or vector loop diagrams that affect assembly build directly or indirectly. A complex dimensional chain involving multiple loops can be assimilated in this manner in a very intuitive way, resulting in simplified approach to developing large systems. 5
6 Roll-up method of evaluating assembly build clearance from part tolerances using Worst Case Method (results in conservative dimensional management approach) is used to arrive at the clearance range. Fig. 7: Roll-up clearance values based on individual part tolerances using WC Method Sensitivity Report highlighting the contribution of individual dimensions and their tolerances to the overall assembly build helps designers obtain an insight into the interaction between different tolerance zones. This helps in identifying key contributors that would solve dimensional management issues. Fig. 8: Sensitivity Graph of contributing dimensions Finally, PPM calculations for assemblies that would be out of specification is estimated based on Roll-Down approach wherein the overall clearance is specified based on a Six Sigma approach. 6
7 Fig. 9: Statistical PPM Report of Distribution of assemblies out of specification The Statistics report plots the calculated distribution over the specified control limits and calculates the percent out of spec for the calculated distribution. In this example, 13.36% of assemblies will be built out of spec for the Worst Case analysis. These out of specification calculations are performed under normal distribution, an assumption for the resultant build objective. Summary of Benefits: Following benefits are evident in using SolidWorks with SigmundWorks for Design and Development of Drawings for achieving required assembly build. 1. Correctness and Completeness of Drawings are assured using DimXpert inside SolidWorks 2. Automatic and Manual method of dimensioning based on Datum Selections is available in DimXpert to accelerate the drawing development process 3. Visual method of checking completeness of drawings avoids errors and ambiguities. 4. Integrated tolerance analysis helps assimilate dimensional loops that change automatically when designs undergo revisions 5. Process centring of manufacturing processes are possible based on tolerance reports and deviation sensitivities 6. Lowers cost of production and eliminates rejections 7. Powerful tool in the hands of the user to give the right amount of tolerances, taking into account process capability, at part level for required assembly build specifications 7
G D & T - Overview. Natarajan R. EGS Computers India Private Limited. Director. *
G D & T - Overview Natarajan R Director www.egs.co.in * www.egsindia.com EGS Computers India Private Limited Agenda Introduction to GD & T DimXpert for GD & T G D & T by examples Benefits of G D & T What
More informationAdvanced Dimensional Management LLC
Index: Mechanical Tolerance Stackup and Analysis Bryan R. Fischer Accuracy and precision 8-9 Advanced Dimensional Management 14, 21, 78, 118, 208, 251, 286, 329-366 Ambiguity 4, 8-14 ASME B89 48 ASME Y14.5M-1994
More informationDatum reference frame Position and shape tolerances Tolerance analysis
Datum reference frame Position and shape tolerances Tolerance analysis Šimon Kovář Datum reference frame Datum reference frames are typically for 3D. A typical datum reference frame is made up of three
More informationAdvanced Dimensional Management LLC
Index for Tolerance Stackup, Tolerance Analysis and Tolerancing Manual: Plus and Minus Edition Accuracy and precision 3, 19 Ambiguity 20 ASME Y14.5M-1994 2 rule #1 2 Assembly Process 20, 28, 79-81 Assembly
More informationVector Based Datum Transformation Scheme for Computer Aided Measurement
289 Vector Based Datum Transformation Scheme for Computer Aided Measurement Danny K. L. Lai 1 and Matthew. M. F. Yuen 2 1 The Hong Kong University of Science and Technology, dannylai@ust.hk 2 The Hong
More informationhttp://blogs.solidworks.com/solidworksblog/2015/10/mbdimplementation-10-dos-and-10-donts-dont-hesitate-part-1.html Create MBE Vision Plan Identify Data Needs Assess PMI Consumption 3 DimXperts 2D Drawings
More informationPrecision. A Vision for. Weaving Innovation. Orthopaedic Instruments Break Tradition. OrthoTecOnline.com PREMIERE ISSUE
OrthoTecOnline.com SPRING 2010 VOL. 1 NO. 1 Providing expert insight on orthopaedic technology, development, and manufacturing PREMIERE ISSUE A Vision for Precision Profi le tolerancing for orthopaedic
More informationHOW TO REVIEW A CETOL 6σ ANALYSIS Presented by Dan Lange, Manager - Services
HOW TO REVIEW A CETOL 6σ ANALYSIS Presented by Dan Lange, Manager - Services Abstract Reviewing a CETOL 6σ analysis requires a comprehensive understanding of the assembly being studied and the capabilities
More informationAssembly Set. capabilities for assembly, design, and evaluation
Assembly Set capabilities for assembly, design, and evaluation I-DEAS Master Assembly I-DEAS Master Assembly software allows you to work in a multi-user environment to lay out, design, and manage large
More informationA CAD based Computer-Aided Tolerancing Model for Machining Processes
Master Thesis Proposal A CAD based Computer-Aided Tolerancing Model for Machining Processes By Yujing Feng Department of Computer Science Indiana University South Bend July 2003 Abstract The Computer Aided
More informationResearch on aircraft components assembly tolerance design and simulation technology
3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015) Research on aircraft components assembly tolerance design and simulation technology Wei Wang 1,a HongJun
More informationGETTING YOUR DIGITAL HOUSE IN ORDER
GETTING YOUR DIGITAL HOUSE IN ORDER STREAMLINING THE MBD AND DETAILING PROCESS WITH CREO Martin Neumüller Creo Product Management PTC Eindhoven, 2017 AGENDA 1. MBD opportunities and challenges 2. Creo
More informationModel-Based Definition using Creo Parametric and GD&T Advisor
Model-Based Definition using Creo Parametric and GD&T Advisor Ted Anderson Product Line Manager Sigmetrix, LLC Model-Based Definition What is it? Why Model-Based Definition? What tools are required to
More informationExpanding Tolerance Analysis for a Robust Product Design
Expanding Tolerance Analysis for a Robust Product Design Chris Wilkes President & CEO Sigmetrix, LLC 2240 Bush Dr. McKinney, TX 75070 Dr. Andreas Vlahinos Principal Advanced Engineering Solutions, LLC
More informationAutomating GD&T Schema for Mechanical Assemblies. Sayed Mohammad Hejazi
Automating GD&T Schema for Mechanical Assemblies by Sayed Mohammad Hejazi A Thesis Presented in Partial Fulfillment of the Requirements for the Degree Master of Science Approved July 2016 by the Graduate
More informationUnderstanding Drawings
Chapter 3 Understanding Drawings LEARNING OBJECTIVES After studying this chapter, students will be able to: Read drawings that are dimensioned in fractional inches, decimal inches, and in metric units.
More informationMeasurement and Tolerances
Measurement and Tolerances Alessandro Anzalone, Ph.D. Hillsborough Community College, Brandon Campus Measurement and Tolerances Sections: 1. Meaning of Tolerance 2. Geometric Dimensioning and Tolerancing
More informationProduct and Manufacturing Information(PMI)
Product and Manufacturing Information(PMI) Ravi Krishnan V 1 Post Graduate Student Department of Mechanical Engineering Veermata Jijabai Technological Institute Mumbai, India ravi.krishnan30@gmail.com
More informationGPS in practice Challenges and opportunities, Johan Dovmark, Novo Nordisk A/S
1 GPS in practice Challenges and opportunities Johan Dovmark, Novo Nordisk A/S 2017-11-08 2 The Vision of ISO/TC 213 Dimensional and Geometrical Product Specification To develop standards that will enable:
More informationTOLERANCING is a critical issue in the design of electromechanical
1062 IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, VOL. 15, NO. 6, DECEMBER 1999 Design for Tolerance of Electro-Mechanical Assemblies: An Integrated Approach Yadati Narahari, Member, IEEE, Rachuri Sudarsan,
More informationProduct and Manufacturing Information (PMI)
Product and Manufacturing Information (PMI) 1 Yadav Virendrasingh Sureshnarayan, 2 R.K.Agrawal 1 Student of ME in Product Design and Development,YTCEM -Bhivpuri road-karjat, Maharastra 2 HOD Mechanical
More informationCourse Summary. CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning
Course Summary CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning NO. COURSE NAME CLASSROOM* WEBINAR ON-DEMAND MBD/MBE EDUCATION
More informationGEOMETRICAL TOLERANCING
GEOMETRICAL TOLERANCING Introduction In a typical engineering design and production environment, the designer of a part rarely follows the design to the shop floor, and consequently the only means of communication
More informationCADValidator: A Critical Aid for the Model-Based Enterprise
CADValidator: A Critical Aid for the Model-Based Enterprise Abstract Learn the importance of validation for deployment of model-based engineering practices. In addition, understand what functionality is
More informationTo help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD
To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and
More informationCETOL 6σ Tutorial. For Pro/Engineer and Creo Parametric. The table. CETOL 6σ / ProE. Page 1
CETOL 6σ Tutorial For Pro/Engineer and Creo Parametric The table Page 1 The Table Description: This tutorial will show you the basic functionality of CETOL 6 Sigma. An analysis normally starts with a definition
More informationFOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards
Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and ideal geometries through drawings or by means of Computer Aided Design systems, but unfortunately
More informationLeverage 3D Master. Improve Cost and Quality throughout the Product Development Process
Leverage 3D Master Improve Cost and Quality throughout the Product Development Process Introduction With today s ongoing global pressures, organizations need to drive innovation and be first to market
More informationComputer-Aided Manufacturing
Computer-Aided Manufacturing Third Edition Tien-Chien Chang, Richard A. Wysk, and Hsu-Pin (Ben) Wang PEARSON Prentice Hall Upper Saddle River, New Jersey 07458 Contents Chapter 1 Introduction to Manufacturing
More informationSoftware Validation Considerations within Medical Companies per FDA 21 CFR PART 11
Greg Hetland, Ph.D. International Institute of GD&T Software Validation Considerations within Medical Companies per FDA 21 CFR PART 11 One critical challenge facing today s medical OEMs and suppliers is
More informationSpecification D data models
Previous Edition Specification 2017-04 Class: Dimensions, tolerances Class No.:01 Documentation of components by means of 3D data models 516 Part name (for databases) 2009-09 3D data models 852 005 160
More informationISO INTERNATIONAL STANDARD. Technical product documentation Digital product definition data practices
INTERNATIONAL STANDARD ISO 16792 First edition 2006-12-15 Technical product documentation Digital product definition data practices Documentation technique de produits Données de définition d'un produit
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationIED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps.
IED Detailed Outline Unit 1 Design Process Time Days: 16 days Understandings An engineering design process involves a characteristic set of practices and steps. Research derived from a variety of sources
More informationHigh School PLTW Introduction to Engineering Design Curriculum
Grade 9th - 12th, 1 Credit Elective Course Prerequisites: Algebra 1A High School PLTW Introduction to Engineering Design Curriculum Course Description: Students use a problem-solving model to improve existing
More informationHonors Drawing/Design for Production (DDP)
Honors Drawing/Design for Production (DDP) Unit 1: Design Process Time Days: 49 days Lesson 1.1: Introduction to a Design Process (11 days): 1. There are many design processes that guide professionals
More informationStacked Blocks Tutorial
For ME 577 Written by Michael Tonks 2 TABLE OF CONTENTS 1. Analysis Preparation... 3 START UP PROGRAMS:... 3 OPEN STACKED BLOCKS ASSEMBLY:... 3 2. Parametric Tolerance Analysis... 3 DEFINE DESIGN SPECIFICATION:...
More informationStandardization of CMM Algorithms and Development of Inspection Maps for. Geometric Tolerances. Neelakantan Mani
Standardization of CMM Algorithms and Development of Inspection Maps for Geometric Tolerances by Neelakantan Mani A Thesis Presented in Partial Fulfillment of the Requirements for the Degree Master of
More informationActivity 7.1 More Dimensioning
Activity 7.1 More Dimensioning Introduction The basic standard dimensioning method established by the American National Standards Institute and the American Society of Mechanical Engineers (ANSI or ASME)
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration : 4 days Time : 9:00am 5:00pm Methodology : Instructor led Presentation, exercises and discussion Target : Individuals
More informationGeometric Tolerances & Dimensioning
Geometric Tolerances & Dimensioning MANUFACTURING PROCESSES - 2, IE-352 Ahmed M. El-Sherbeeny, PhD KING SAUD UNIVERSITY Spring - 2015 1 Content Overview Form tolerances Orientation tolerances Location
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1101 Fourth edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out Spécification géométrique des
More informationStandards for Your Career Field
Dimensioning Dimensions Dimensions are used to describe the sizes and relationships between features in your drawing. Dimensions are used to manufacture parts and to inspect the resulting parts to determine
More informationGetting to the end game with QIF: Useable Parts. Mark Nielsen TechAzul
Getting to the end game with QIF: Useable Parts Mark Nielsen TechAzul 310-729-6275 mark@techazul.com Mark Nielsen Founder TechAzul Masters of Science in Mechanical Engineering, University of California,
More informationImportant Considerations For Graphical Representations Of Data
This document will help you identify important considerations when using graphs (also called charts) to represent your data. First, it is crucial to understand how to create good graphs. Then, an overview
More informationUsing Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions
Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions 3 rd TRI-NATIONAL WORKSHOP AND MEETING OF THE NORTH AMERICAN COORDINATE METROLOGY ASSOCIATION 3D Measurement
More informationMODELING FOR THE END GAME > USABLE PARTS
MODELING FOR THE END GAME > USABLE PARTS Mark Nielsen TechAzul 310-729-6275 liveworx.com # L I V E W O R X MARK NIELSEN Founder TechAzul BS & MS Mechanical Engineering, University of California, Berkeley
More informationTTC Catalog - Engineering Graphics Technology (EGT)
2018-2019 TTC Catalog - Engineering Graphics Technology (EGT) EGT 001 - EGT 001 Lec: 0 Lab: 0 Credit: * Indicates credit given f engineering graphics course wk transferred from another college f which
More informationLesson 16 Helical Sweeps and Annotations
Lesson 16 Helical Sweeps and Annotations Figure 16.1 Helical Compression Spring Drawing OBJECTIVES Create a helical compression spring with a Helical Sweep Use sweeps to create hooks on extension springs
More informationISO INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
INTERNATIONAL STANDARD ISO 14405-2 First edition 2011-12-01 Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes Spécification géométrique des produits
More informationComprehensive GD&T Evaluation Software for Manufacturing Quality Control
Comprehensive GD&T Evaluation Software for Manufacturing Quality Control Model-Based Family of Software EVOLVE SmartProfile Comprehensive GD&T Evaluation Software for Manufacturing Quality Control Easy
More informationNAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015
NAVAIR Non Contact In-Process Inspection Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 Overview Background on Navy 3D Model Status (3MS / MBD) Proposed System Examples Definition of Digital Product
More informationDRAWING STANDARDS D01
Revision E 10 Scope These Drawing Standards regulate dimensioning, tolerancing and labelling of technical documents as well as the symbols to be used. This guideline shall apply for all new parts as well
More informationGeometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 1660 Third edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing Spécification géométrique des produits
More informationThe Evolution of GPS. In The Good Ole Days. The Evolution of Products. Introduction. The First Geometrical Tolerances
The Role of Standardization for Industrial Metrology The Evolution of GPS 1 Dr. Henrik S. Nielsen HN Metrology Consulting Chairman, ISO TC 213: Geometrical Product Specifications GPS has followed the development
More informationCREO 4.0: MODEL BASED DEFINITION (MBD)
CREO 4.0: MODEL BASED DEFINITION (MBD) Raphael Nascimento Product Manager PTC Creo 17 November, 2016 PTC Forum Europe Stuttgart, Germany Model Based Definition (MBD) AGENDA GD&T Advisor Questions? 2 Model
More informationReport on Extended Kalman Filter Simulation Experiments
Report on Extended Kalman Filter Simulation Experiments Aeronautical Engineering 551 Integrated Navigation and Guidance Systems Chad R. Frost December 6, 1997 Introduction This report describes my experiments
More informationDesign & Engineering
Paras is committed to provide cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time. With installations
More informationComputer Modeling of Geometric Variations in Mechanical Parts and Assemblies
Yanyan Wu, 1 GE Global Research, Schenectady, NY Jami J. Shah Joseph K. Davidson Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287-6106 Computer Modeling of
More informationAPPLICATION OF VECTORIAL TOLERANCES IN CAD-SYSTEMS DURING THE DESIGN PROCESS
INTERNATIONAL DESIGN CONFERENCE - DESIGN 2016 Dubrovnik - Croatia, May 16-19, 2016. APPLICATION OF VECTORIAL TOLERANCES IN CAD-SYSTEMS DURING THE DESIGN PROCESS S. Husung, C. Weber, A. Kroschel, K.-H.
More informationMechanical Design. CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20
Mechanical Design CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20 Mechanical Design CATIA - 3D Functional Tolerancing and Annotations Define and manage tolerance specifications and
More informationDECEMBER 2011, VOLUME 50/NUMBER 13 Vision & Sensors INSIDE THIS ISSUE LOCATED AFTER. p. 32
DECEMBER 2011, VOLUME 50/NUMBER 13 WWW.QUALITYMAG.COM INSIDE THIS ISSUE Vision & Sensors LOCATED AFTER p. 32 Inertial Sensor Components Achieving Higher Mechanical Precision with Profile Tolerancing by
More informationMechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20
Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20 Mechanical Design CATIA - Interactive Drafting Address 2D design and drawing production requirements. Product overview Interactive Drafting
More informationTolerancing. Summary
Tolerancing Summary Summary What will we learn We will learn about tolerancing and how important this technique is to mass production. Key points If a feature s size is toleranced, it is allowed to vary
More informationRepresentation of features Geometric tolerances. Prof Ahmed Kovacevic
ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 6 Representation of features Geometric tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130,
More informationTolerance Analysis of 2-D and 3-D Mechanical Assemblies
Proceedings of the 5th International Seminar on Computer-Aided Tolerancing Toronto, Canada, April 27-29, 1997 A Comprehensive System for Computer-Aided Tolerance Analysis of 2-D and 3-D Mechanical Assemblies
More informationprintcontrol Printing process control at a click of the mouse
printcontrol Printing process control at a click of the mouse Printing process control with GMG PrintControl and GMG RapidCheck The significance of process control in the graphic arts industry has grown
More informationV4. CAD - Machinery. 5. Instructions for specifications a. A technical drawing shall be created in conformity with the following ISO standards.
IA2007 Shizuoka, Japan 7 t thh Internatiionall Abiillympiics Vooccattiioonall Skiillllss Coontteesstt V4. CAD - Machinery 1. Task Based on the drawing of a gear pump, create a detail drawing of the main
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationSingle Part Tolerance Analysis 1
856 SALT LAKE COURT SAN JOSE, CA 95133 (408) 251 5329 Single Part Tolerance Analysis 1 2X Ø.250 ±.005 D 3.075-3.175.500 2.000.250 ±.005 E.375 C 2.050 1.950.609.859 1.375 G 1.125 B.375.750 1.125 1.500 1.875
More informationBRIDGING THE WORLDS OF 2D AND 3D CAD DESIGN
WHITE PAPER BRIDGING THE WORLDS OF 2D AND 3D CAD DESIGN Overview As manufacturers rapidly transition from 2D to 3D CAD in today s digital world, designers are demanding 3D to enhance their designs and
More informationModule 1 - Introduction. In the space below, write any additional goals, objectives, or expectations you have for this module or course:
In the space below, write any additional goals, objectives, or expectations you have for this module or course: 1-1 Engineering drawings contain several typical types of information, as illustrated in
More informationEngineering & Design: Geometric Dimensioning
Section Contents NADCA No. Format Page Frequently Asked Questions -2 s e c t i o n 1 Introduction -2 2 What is GD&T? -2 3 Why Should GD&T be Used? -2 4 Datum Reference Frame -4 4.1 Primary, Secondary,
More information1.0 What is tolerance analysis? 2.0 What is Tolerance Stackup? 3.0 Generally, the Tolerance Stackup Process 4.0 Method and Types of Tolerance
TOLERANCE ANALYSIS 1.0 What is tolerance analysis? 2.0 What is Tolerance Stackup? 3.0 Generally, the Tolerance Stackup Process 4.0 Method and Types of Tolerance Analysis 5.0 Worst-case Tolerance Stackup
More informationThe George Washington University Gaithersburg, MD 20899, USA. 1.1 Status of Design Tolerancing
Proceedings of the 1998 IEEE international Conference on Robotics & Automation Leuven, Belgium May 1998 DESIGN FOR TOLERANCE OF ELECTRO-MECHANICAL ASSEMBLIES R. Sudarsan, Y. Narahari, K.W. Lyons, R.D.
More informationGeometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing
INTERNATIONAL STANDARD ISO 1660 Third edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing Spécification géométrique des produits (GPS) Tolérancement géométrique
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration: 4 Days Training Course Content: Day 1: Tolerancing in Engineering Drawing (9:00am-10:00am) 1.0 Geometric Dimensioning
More informationThe How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity
1 The How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity 2 The Importance of Engineering Investments What strategies will your company use to improve profitability?
More informationthe same information given in two different 1. Dimensions should NOT be duplicated, or Dimension Guidelines Incorrect ways.
Dimension Guidelines 1. Dimensions should NOT be duplicated, or the same information given in two different ways. Incorrect 1. Dimensions should NOT be duplicated, or the same information given in two
More informationand Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationNEW STANDARDS IN THE FIELD OF GEOMETRICAL PRODUCT SPECIFICATIONS
NEW STANDARDS IN THE FIELD OF GEOMETRICAL PRODUCT SPECIFICATIONS Pavlina TOTEVA, Dimka VASILEVA and Nadezhda MIHAYLOVA ABSTRACT: The essential tool for improving product quality and reducing manufacturing
More informationAC Analyses. Chapter Introduction
Chapter 3 AC Analyses 3.1 Introduction The AC analyses are a family of frequency-domain analyses that include AC analysis, transfer function (XF) analysis, scattering parameter (SP, TDR) analyses, and
More informationConsultancy Services. CAD/CAM/CAE Training Programs. GD&T (Geometric Dimensioning & Tolerancing)
TM Consultancy Services CAD/CAM/CAE GD&T (Geometric Dimensioning & Tolerancing) L-8 (Basement), Suyojit Sankul Below Bank of Maharashtra Sharanpur Road, Tilakwadi NASHIK. 422 002 INDIA (0253) 6693 591
More informationA C++ Library for the Automatic Interpretation of Geometrical and Dimensional Tolerances
A C++ Library for the Automatic Interpretation of Geometrical and Dimensional Tolerances Remy Dionne, Luc Baron, Ph.D. and Christian Mascle, Ph.D. Department of Mechanical Engineering École Polytechnique
More informationPolyWorks Inspector Standard. 3 Day Course
PolyWorks Inspector Standard INTRODUCTION TO POLYWORKS Workspace Manager Basic Options File and Project Structures PolyWorks License Manager INTRODUCTION TO POLYWORKS INSPECTOR User Interface Basic Options
More informationTolerancing in Zemax. Lecture 4
Tolerancing in Zemax Lecture 4 Objectives: Lecture 4 At the end of this lecture you should: 1. Understand the reason for tolerancing and its relation to typical manufacturing errors 2. Be able to perform
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10303-519 First edition 2000-03-01 Industrial automation systems and integration Product data representation and exchange Part 519: Application interpreted construct: Geometric
More informationLesson 4 Extrusions OBJECTIVES. Extrusions
Lesson 4 Extrusions Figure 4.1 Clamp OBJECTIVES Create a feature using an Extruded protrusion Understand Setup and Environment settings Define and set a Material type Create and use Datum features Sketch
More informationDesign Issues in Mechanical Tolerance Analysis
Design Issues in Mechanical Tolerance Analysis ADCATS Report No. 87-5 Reprinted from Manufacturing Review, ASME, vol 1, no 1, Mar. 1988, pp. 50-59 K. W. Chase Mechanical Engineering Department Brigham
More informationMultiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary
Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Wednesday, August 20, 2014, 3:14PM District Intermediate Introduction to
More informationForces on a 2D Plane
C h a p t e r 3 Forces on a 2D Plane In this chapter, you will learn the following to World Class standards: 1. Measuring the Magnitude and Direction of a Force Vector 2. Computing the Resultant Force
More informationDimension Properties. Student Web Site
Dimension Properties All sketch dimensions added to a sketch contain specific individual dimension properties. Most dimension properties are predefined by default or are specified in the Modeling Dimension
More informationENGINEERING GRAPHICS. Lecture 1: Introduction to Graphic Communication. Jazmin Ley University of Texas Rio Grande Valley
ENGINEERING GRAPHICS Lecture 1: Introduction to Graphic Communication Jazmin Ley University of Texas Rio Grande Valley Overview Graphics Communication in the Design Process Engineering Design Process:
More informationprintcontrol Printing process control at a click of the mouse
printcontrol Printing process control at a click of the mouse Printing process control with GMG PrintControl and GMG RapidCheck The significance of process control in the graphic arts industry has grown
More informationINDICATION OF FUNCTIONAL DIMENSION ACCORDING ISO GPS HOW SHALL WE APPLICATE?
INDICATION OF FUNCTIONAL DIMENSION ACCORDING ISO GPS HOW SHALL WE APPLICATE? Karel PETR 1 1 Department of Designing and Machine Components, Faculty of Mechanical Engineering, Czech Technical University
More information1994 Dimensioning & Tolerancing
ASME Y14.5M-1994 1994 Dimensioning & Tolerancing The new scanning generation Zeiss / Applied Geometrics, Inc. Applied Geometrics, Inc. Copyright 2003 1 Zeiss Carl Zeiss is one of the world's leading enterprises
More informationThe Statistical Cracks in the Foundation of the Popular Gauge R&R Approach
The Statistical Cracks in the Foundation of the Popular Gauge R&R Approach 10 parts, 3 repeats and 3 operators to calculate the measurement error as a % of the tolerance Repeatability: size matters The
More informationGeometry Controls and Report
Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationNIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015
YOUR CENTRAL SOURCE FOR DATA EXCHANGE NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015 Doug Cheney CAD Validation Specialist ITI TranscenData Doug.Cheney@TranscenData.com
More information