VL1000 Software Version History VL1000 3/25/02 4/10/02 4/15/02 4/25/02 5/16/02 6/25/02 7/09/02 8/08/02
|
|
- Justin Higgins
- 5 years ago
- Views:
Transcription
1 Page 1 of 5 SUBJECT: VL1000 Luminaire Software Version History SERIES: 1000 DISTRIBUTION: Service Centers, End Users STATUS: Routine Introduction VL1000 Software Version History This technical bulletin covers changes to VL1000 software prior to version 1/13/02. The following dates correspond to these software versions: VL1000 3/25/02 4/10/02 4/15/02 4/25/02 5/16/02 6/25/02 7/09/02 8/08/02 For instructions on downloading and installing VARI LITE luminaire software, refer to technical bulletin LSW-002. Note: The number previously associated with each software version has been removed to prevent confusion. The version will now be identified by its date, as it is displayed in the luminaire. If you have any questions regarding this release or your VARI LITE product, please contact Vari- Lite Customer Service at VARILITE. VARI LITE, VL1000, VL2000, and VL3000 are trademarks of Genlyte Thomas Group LLC
2 Page 2 of 5 Release Notes Improvements SV 8/08/02 Arc dimmer corrected to close fully at zero. Gobo control modified to reduce noise while holding position. SV 7/09/02 Modified rotational speed of rotating gobo. The slowest speed of rotation has been reduced. (CAUTION: This change may affect how the luminaire responds to cue data stored with previous versions.) The minimum rate in v4.6: 1 revolution takes 2.53 minutes The minimum rate in v4.7: 1 revolution takes minutes: SV 6/25/02 Range Action CW Rotation Stop CCW Rotation Doubled speed of shutter blades. (CAUTION: When playing back previously stored cues, the shutters will move faster than when they were originally stored.) Added move-curve correction to Arc dimmer. This improvement makes the output linear, so that a curve may be applied with expected results. (CAUTION: An intensity level change will be evident in previously stored cues with values from 0-50%.) Corrected timed moves for mechanisms requiring a move curve. Colors will now use a consistent time when performing short moves near the center of travel.
3 Page 3 of 5 Expanded Color Mix test to include intermediate positions and groups moving separately as follows: SV 5/16/02 Step Action 1 All Open 2 All Closed 3 Mag/Diffusion Closed 4 Blue/Green Closed 5 All at 50% Increased color/diffuser speed. It is approximately three times faster. Increased arc dimmer speed. It is slightly faster. Partial recalibration of mechanisms now possible. It works like any other reset. (For arc luminaires, the dimmer is included in all recalibrations.) To initiate, set control channel to proper value for three seconds or more, then immediately take it to zero. The options available are listed below. DMX values are +/ % (DMX 102) blue/amber/magenta/diffuser 45% (DMX 115) rotating gobo/index 50% (DMX 128) edge/zoom 55% (DMX 140) beam size iris/shutter Corrected pan/tilt disable via menu (previously responded to DMX commands). Reduced edge calibration speed and power. Reduced shutter blade holding power. Adjusted shutter blade hysteresis.
4 Page 4 of 5 SV 4/25/02 Gobo wheel and index holding power to 100%. Gobo wheel minimum speed decrease for console timing moves. Adjusted pan and tilt calibration functions so that they find edge of their sensor more accurately. Pan and tilt encoder correction adjusted to compensate more accurately. Pan and tilt timed moves now use encoder correction. Created unique motor drive curve for pan and tilt to minimize shaking at low speeds. Corrected speed targets after interrupted moves. Average sensor samples are now used for determining sensor state. Beam iris calibration power reduced. All Test function adjusted to use gobo wheel Position 3 (spin). Shutter self-test time extended. Adjusted calibration moves so that they complete before processing new commands. Repeated attempts at recalibrating a mechanism with a sensor are now allowed. Corrected calibration procedure for failed sensor conditions. SV 4/15/02 Improvements to rotating shutter mechanism: 1) increased power, 2) modified range limits. Gobo wheel now takes shortest path. Improved color hysteresis correction. Corrected bug in pan calibration. Reduced zoom power to reduce overall luminaire noise. Smoothed motion of edge function.
5 Page 5 of 5 SV 4/10/02 Improvements to self-test function: 1) default beam position set to open, 2) expanded rotating gobo sensor test to account for possibility of recalibration, 3) set gobo rotate to Position 1 during gobo index test. Eliminated interaction between DMX and test mode operation. Timed moves of rotating mechanisms now take shortest path. Corrected logic for triggering a recalibration check. Corrected hysteresis calculations for certain mechanisms. Corrected profile calculations for rotating mechanisms. Added gobo index and wheel dynamic tuning to help prevent recalibrations. Pan and tilt modified to be more responsive to interrupted commands. Improvements to color functions: 1) adjusted hysteresis values, 2) proportional gain, 3) initial position following calibration. Improvement to edge functions: 1) adjusted hysteresis value, 2) added dynamic tuning, 3) decreased power level to reduce noise. Reduced speed of rotating shutter mechanism. Improvements to shutter blade action: 1) now calibrates to full position, 2) added dynamic tuning, 3) modify current waveform for these motors. SV 3/25/02 Pan/tilt maximum speed has been increased. Hysteresis correction (adjustment for interrupted moves) has been improved for the following mechanisms: gobo index, color/diffuser, edge, zoom, dimmer, and beam-size iris (if applicable). The Fixture Hours and Lamp Hours functions now work correctly for both the arc and incandescent versions of the VL1000 luminaire. (Note that Lamp Hours is not applicable for incandescent luminaires.) Standby is now supported. This function reduces arc lamp power after three minutes. The beam-size iris calibration direction is fixed. (Previously, this mechanism calibrated in the wrong direction.)
Introduction. Purpose
Page 1 of 6 SUBJECT: VL1000 / VL2000 Luminaire Software SERIES: 1000/2000 DISTRIBUTION: Service Centers, End Users STATUS: Routine Introduction 10 minutes Purpose Software Version 4.8 containing updated
More informationThe ideal replacement solution to the VL3000 Series spot or any other 1,000W to 1,500W lamped professional moving spot light.
The ideal replacement solution to the VL3000 Series spot or any other 1,000W to 1,500W lamped professional moving spot light. The Vari-Lite VLZ Profile is a dedicated profile luminaire utilizing the latest
More informationRogue R1 Spot DMX Chart. DMX Values. 19CH Channel Function Value Percent/Setting. 1
DMX Values 1 Pan 000 255 0 100% 2 Fine Pan 000 255 0 100% 3 Tilt 000 255 0 100% 4 Fine Tilt 000 255 0 100% 5 Pan/Tilt Speed 000 255 0 100% 6 Dimmer 000 255 0 100% 7 Fine Dimmer 000 255 0 100% 8 Shutter
More informationRogue R2 Beam DMX Chart. DMX Values. 18CH Channel Function Value Percent/Setting. 1
DMX Values 1 Pan 000 255 0 100% 2 Fine Pan 000 255 0 100% 3 Tilt 000 255 0 100% 4 Fine Tilt 000 255 0 100% 5 Pan/Tilt Speed 000 255 0 100% 6 Dimmer 000 255 0 100% 7 Fine Dimmer 000 255 0 100% 000 007 Closed
More informationRogue R2 Spot DMX Chart. DMX Values. 21CH Channel Function Value Percent/Setting. 1
DMX Values 1 Pan 000 255 0 100% 2 Fine Pan 000 255 0 100% 3 Tilt 000 255 0 100% 4 Fine Tilt 000 255 0 100% 5 Pan/Tilt Speed 000 255 0 100% 6 Dimmer 000 255 0 100% 7 Fine Dimmer 000 255 0 100% 000 003 Closed
More informationDMX Channel Index. Software v
DMX Channel Index Software v. 28-40-31-27 GLP impression E350 DMX Channel Index Revision A This user manual covers fixture software version v. 28-40-21-27 2018 German Light Products GmbH. All rights reserved.
More informationQUICK REFERENCE GUIDE
Main Level Programming Levels Description Pan Reverse Reverse pan operation Normal pan operation Tilt Reverse Reverse tilt operation Normal tilt operation Screen Rev Normal control screen view Rotates
More informationSolaWash 2000 Luminaire DMX Control Protocol *
SolaWash 2 Luminaire DMX Control Protocol * Revision: 1.3 27-Feb-18 Standard Prototocol Channel Construct 1 Pan Coarse 2 Pan Fine 3 Tilt Coarse 4 Tilt Fine 5 Mix Color Function 6 Cyan 7 Magenta 8 Yellow
More informationFOLLOWSPOT CONTROLLER
SOFTWARE VERSION 2.0 WWW.PRG.COM FOLLOWSPOT CONTROLLER USER MANUAL AutoPar, Bad Boy, Best Boy, Followspot Controller, Mbox, Mini Node, Nocturne, Series 400, ReNEW, Super Node, V476, V676, and Virtuoso
More informationCONTENTS. Information. VL550 Wash VL550 80V VL550 CD. VL1100 Tungsten. VL1100 Arc VL1100 CD. VL2500 Spot. VL2500 Wash. VL3000 Spot VL3000 Q Spot
VL550 Wash VL550 80V VL550 CD VL1100 Tungsten VL1100 Arc VL1100 CD VL2500 Spot VL2500 Wash CONTENTS Pages 2-3 VL550 Wash VL3000 Spot VL3000 Q Spot VL3000 Wash VL3000 Q Wash VL3500 Spot VL3500 Q Spot Pages
More informationThe VL1000 ERS. Getting inside one of the lighting industry s most talked-about products TECHNICAL FOCUS : PRODUCT IN-DEPTH. Lamp.
As seen in Lighting&Sound America October 2004, www.lightingandsoundamerica.com The VL1000 ERS Getting inside one of the lighting industry s most talked-about products by Mike Wood Fig 01: Test setup.
More informationUSER S MANUAL. This manual must be considered an integral part of the projector. The user must read this manual before using the projector
575W HMI Scan light ZIPPER 575 USER S MANUAL This manual must be considered an integral part of the projector. The user must read this manual before using the projector AUTHORISED AND QUALIFIED PERSONNEL
More informationPhilips Vari-Lite TECHNICAL FOCUS: PRODUCT IN DEPTH
Copyright Lighting&Sound America November 2018 http://www.lightingandsoundamerica.com/lsa.html Philips Vari-Lite VL2600 Spot By: Mike Wood Light source and cooling The VL2600 Spot uses a new (or, at least,
More informationUsed Gear For Sale. Price includes case. quantities only. Price includes 2 way. case. Sold in case. quantities only. Price includes 4 way
(402) 592-5522 Category Image r Model Details/Cases Qty. Available Condition Dimensions grandma2 Full MA Lighting s most powerful console and offers includes case the control of conventional light, moving
More informationPhotometric Report. Internet:
Photometric Report e-mail: service@glp.de Internet: http://www.glp.de Impression Spot One Photometric Report Manufacturer: GLP German Light Products GmbH, Im Stöckmädle 13, 76307 Karlsbad, Germany Product:
More informationGuangzhou Liangyi Lighting Equipments Co., Ltd.
Guangzhou Liangyi Lighting Equipments Co., Ltd. 37 Gongyedadao, Xinhua, Huadu,Guangzhou PC: 510800 Tel : (020) 666 090 88-8002 Fax: (020) 868 670 11 www.eklights.com USER MANUAL CONTENTS TROUBLE SHOOTING
More informationVR8 - VR8R edition. Abstract Design to Light 1998 Tel:
VR8 - VR8R Abstract Design to Light 1998 Tel:0116 278 8078 http://www.abstract-lighting.co.uk VR Instruction Manual - Issue 1.2: May 2000 Written for Abstract Design to Light by Sabre Technology Ltd: 01482
More informationpreview ALPHA 1500 Profile Spot HPE Beam Wash Wash LT Data and specifications are preliminary, subject to modifications
www.claypaky.it preview ALPHA 1500 Profile Spot HPE Beam Wash Wash LT Data and specifications are preliminary, subject to modifications Alpha Profile 1500 Alpha Spot HPE 1500 2 ALPHA 1500 RANGE Alpha Beam
More informationUsed Gear For Sale. Price includes 4 way case. Sold in case quantities only. Price includes 4 way case. Sold in case quantities only.
Sharpy Wash 330 Compact, lightweight washlight, with luminous efficiency, graphic and optical performance of a 1000W fixture includes 4 way 20 Excellent 45x31x27 219.8 lbs 2013 $3,000.00 Platinum Beam
More informationBMFL FollowSpot. Light source 1700 W OSRAM Lok-it! HTI 1700/PS. LIGHT OUTPUT lm, m, m.
BMFL FollowSpot Created specifically for follow-spot operation, this custom modified version of BMFL comes with specific features to provide both motorised movement and manual operation with follow-spot
More informationAyrton GHIBLI TECHNICAL FOCUS: PRODUCT IN DEPTH
Copyright Lighting&Sound America May 2018 http://www.lightingandsoundamerica.com/lsa.html Ayrton GHIBLI By: Mike Wood Figure 2: Heat sink and fans. Light source The light source in the Ghibli is a familiar-looking
More informationVR8 - VR8R 2000 edition
email: enquiries@sxsevents.co.uk VR8 - VR8R Abstract Design to Light 1998 Tel:0116 278 8078 http://www.abstract-lighting.co.uk VR Instruction Manual - Issue 1.2: May 2000 Written for Abstract Design to
More informationELATION PLATINUM 1200 WASH DMX Channel Values / Functions (93 Total DMX Channels) Supports Software Versions: 2.1.0
10 6 11 12 13 17 18 20 21 22 23 24 1 1 1 2 2 2 3 3 3 5 4 4 6 4 7 8 5 9 14 15 16 19 5 6 7 8 9 10 11 12 PAN MOVEMENT [8 BIT] 0-255 PAN Movement PAN FINE MOVEMENT [16 BIT] 0-255 Fine Control of PAN Movement
More informationThe Martin MAC TW1 TECHNICAL FOCUS : PRODUCT IN DEPTH. Dimmers and strobe. Lamp
TECHNICAL FOCUS : PRODUCT IN DEPTH Fig. 1: Fixture as tested Copyright Lighting&Sound America January 2007 www.lightingandsoundamerica.com The Martin MAC TW1 by Mike Wood A few issues ago, we tested the
More informationMEM380 Applied Autonomous Robots I Winter Feedback Control USARSim
MEM380 Applied Autonomous Robots I Winter 2011 Feedback Control USARSim Transforming Accelerations into Position Estimates In a perfect world It s not a perfect world. We have noise and bias in our acceleration
More informationGuangzhou Liangyi Lighting Equipments Co., Ltd.
Guangzhou Liangyi Lighting Equipments Co., Ltd. 7 Gongyedadao,Xinhua, Huadu,Guangzhou PC: 50800 Tel : (00) 666 090 88-800 Fax: (00) 868 670 www.eklights.com USER MANUAL CONTENTS SAFETY DIMENSIONS DESCRIPTION
More informationTest product RUSH Scanner 1 LED. RUSH MH11 Beam. RUSH MH10 Beam FX. RUSH MH 8 Mini Profile. RUSH MH 7 Hybrid. kr Add to basket teaser test
Test product 2017 teaser test RUSH Scanner 1 LED The RUSH Scanner 1 LED is designed to enable lighting designers to boost the wow factor and energize crowds with high-speed mid-air looks in a variety of
More informationRobin CycFX 8- DMX protocol
Version 1.4 Robin CycFX 8 Robin CycFX 8- DMX protocol Mode/Channel Value Function Type of control 1 2 3 4 5 6 7 1 1 1 1 1 1 1 Tilt (8 bit) Tilt movement by 270-2 2 2-2 2 Tilt (16 bit) Fine movement of
More informationLighting Effects LED video Control Atmospheric effects
OCTOBER 2013 MARTIN NEWS The award-winning MAC Viper Family and the new RUSH range of affordable effect lights highlight the latest in Martin product innovation with new solutions also available across
More informationServo Indexer Reference Guide
Servo Indexer Reference Guide Generation 2 - Released 1/08 Table of Contents General Description...... 3 Installation...... 4 Getting Started (Quick Start)....... 5 Jog Functions..... 8 Home Utilities......
More informationHPVFP High Performance Full Function Vector Frequency Inverter
Advanced User Manual HPVFP High Performance Full Function Vector Frequency Inverter HP VER 1.00 1. HPVFP Parameter Set Overview...3 1.1. About this section...3 1.2. Parameter Structure Overview...3 1.3.
More informationMAC Viper Performance. MAC Viper Quadray
NOVEMBER 2013 MAC Viper Performance MARTIN NEWS The award-winning MAC Viper Family and the new RUSH range of affordable effect lights highlight the latest in Martin product innovation with new solutions
More informationTradition Redefined. LED Theatre spots by. Tradition Redefined. Infinity Signature series
LED Theatre spots by The New Standard for Theatre Illumination. The tools you have always wanted to create beautiful, energy efficient lighting for your Theatre, Church, Studio or School. These luminaires
More information1. Safety instructions Control elements of the RoboSpot...4
Version 1.4 Table of contents 1. Safety instructions... 3 2. Control elements of the RoboSpot... 4 2.1 RoboSpot... 4 2.2 FollowSpot Controller... 5 3. Installation... 6 4. RoboSpot connection... 8 5. Operation...
More informationPHOTOMETRIC DATA OUTPUT
THE TOUCH OF LIGHT UKEwihiq3K3efZAhXFCuwKHUkWAd0QMwhVKAUwBQ..i&w=1800&h=1322&client=firefox-b-ab&bih=943&biw=1920&q=fu HIGH POWER COMPACT LED MOVING HEAD WITH BUILT-IN ROTATING FRAMING SYSTEM oco&ved=0ahukewihiq3k3efzahxfcuwkhukwad0qmwhvkauwbq&iact=mrc&uact=8
More informationThe Clay Paky Alpha Spot
Copyright January 2006 Lighting&Sound America TECHNICAL FOCUS : PRODUCT IN-DEPTH Fig. 1 The Clay Paky Alpha Spot by Mike Wood HPE 1200 Fig. 2: Lamp and reflector Clay Paky has been manufacturing moving
More informationServo Tuning Tutorial
Servo Tuning Tutorial 1 Presentation Outline Introduction Servo system defined Why does a servo system need to be tuned Trajectory generator and velocity profiles The PID Filter Proportional gain Derivative
More informationSelecting the Proper Sensor for Optimum System Design Application Bulletin 201
Selecting the Proper Sensor for Optimum System Design Application Bulletin 201 This application bulletin will discuss many of the variables associated with single channel encoding. This will include design
More informationDMX protocol. Robin SPIKIe - DMX protocol
protocol Robin SPIKIe - protocol Version: 1.4 (version of processor m: 2.2 and higher) Mode 1-Standard 16-bit, Mode 2 -Reduced 8-bit Mode/channel 1 1 Pan (8 bit) 0-255 Pan movement by 540 /360 (128=default)
More informationOperating Instructions
Operating Instructions Indexing Table Control - Supplement to User Guide COMPAX-M/S - Power Supply COMPAX-M DIGITAL Status Number Value - + Enter Ready Error Ready Error X6 X7 X6 IN RS485 OUT RS232 X8
More informationThe Martin smartmac By: Mike Wood
The Martin smartmac By: Mike Wood Copyright Lighting&Sound America November 2008 www.lightingandsoundamerica.com/lsa.html Fig.1: Unit as tested. Fig.2: Lamp Fig.3: Lamp change. Fig.4: Heat shield diffuser.
More informationDistributor: Phone: Fax:
A.D. e progetto grafico ACANTO COMUNICAZIONE Ph. AMATI BACCIARDI Distributor: www.techni-lux.com Phone: 407-857-8770 Fax: 407-857-8771 Email: sales@techni-lux.com I GB A000372 rel. 1.00 Via Pio La Torre,
More informationchange the existing DMX start channel set preset playback off set preset playback on display which scene is currently playing CLSD close the shutter
Appendix D Map The Studio Beam fixture s onboard menu system allows you to: Assign a DMX start channel Access fixture options such as, homing the fixture, viewing fixture status, crossloading software,
More informationSGM Giotto Synthesis
Copyright: Lighting&Sound America March 2006 www.lightingandsoundamerica.com Fig. 1 SGM Giotto Synthesis by Mike Wood Fig. 2: Power supplies Fig. 3: Lamp and retainer Fig. 4: Head with modules March 2006
More informationWitbox 2 Firmware update and autolevelling guide
Witbox 2 Firmware update and autolevelling guide Version: 1.0 Author(s): BQ June 28 th 2018 Revised by: Approved by: Jon Goitia Effect date: 28/06/2018 Project: Witbox 2 Changelog Version Date Changes
More informationChauvet Professional Legend 230SR Beam By: Mike Wood
TECHNICAL FOCUS: PRODUCT IN DEPTH Copyright Lighting&Sound America July 2013 http://www.lightingandsoundamerica.com/lsa.html Chauvet Professional Legend 230SR Beam By: Mike Wood We last examined a product
More informationRedefi ning Standards in Theatrical Lighting
Redefi ning Standards in Theatrical Lighting ovation ellipsoidals OVATION E-930VW OVATION MIN-E-10CW / WW Our award-winning Ovation Ellipsoidals redefine standards in theatrical lighting with cutting-edge,
More informationProgramming Notes 10/20.
Programming Notes 10/20 support@germanlightproducts.com www.germanlightproducts.com This guide will serve as an outline for the various DMX modes for the X4 BAR 10 and X4 BAR 20 with a focus on Normal
More information22 Channel Mode Ch. Function Values Sub-Group 1 Pan % to 100% 2 Pan fine % to 100%
22 Channel Mode Ch. Function Values Sub-Group 1 Pan 000-255 0% to 100% 2 Pan fine 000-255 0% to 100% Pan 3 Tilt 000-255 0% to 100% 4 Tilt fine 000-255 0% to 100% Tilt 5 Dimmer 000-255 0% to 100% Dimmer
More informationGLP GT-1 Hybrid Fixture
TECHNICAL FOCUS: PRODUCT IN DEPTH Copyright Lighting&Sound America September 2017 http://www.lightingandsoundamerica.com/lsa.html GLP GT-1 Hybrid Fixture By Mike Wood Figure 1: Fixture as tested. LEDs
More informationDMX protocol. Robin LEDdBeam 150/Robin LEDBeam 150 FW - DMX protocol
protocol Mode/channel Robin LEDdBeam 150/Robin LEDBeam 150 FW - protocol Version: 1.4 Mode 1-Standard 16-bit, Mode 2 -Reduced 8-bit 1 1 Pan (8 bit) 0-255 Pan movement by 450 (128=default) proportional
More informationRedefining Standards in Theatrical Lighting
Redefining Standards in Theatrical Lighting 2019 1 ovation ellipsoidals Our award-winning Ovation Ellipsoidals redefine standards in theatrical lighting with cutting-edge, high-performance LED optical
More informationA Beginner s Guide To Exposure
A Beginner s Guide To Exposure What is exposure? A Beginner s Guide to Exposure What is exposure? According to Wikipedia: In photography, exposure is the amount of light per unit area (the image plane
More informationVia Pio La Torre, Tavullia (PS), Italy Tel Fax
A.D. e progetto grafico ACANTO Ph. AMATI E BACCIARDI I GB A000371 rel. 1.00 Via Pio La Torre, 1 61010 Tavullia (PS), Italy Tel. +39 0721 476477 Fax +39 0721 476170 http://www.sgm.it Email: info@sgm.it
More informationSINGLE SENSOR LINE FOLLOWER
SINGLE SENSOR LINE FOLLOWER One Sensor Line Following Sensor on edge of line If sensor is reading White: Robot is too far right and needs to turn left Black: Robot is too far left and needs to turn right
More informationSentido KNX Manual. Sentido KNX. Manual. basalte bvba hundelgemsesteenweg 1a 9820 merelbeke belgium
basalte bvba hundelgemsesteenweg a 980 merelbeke belgium / 68 06 basalte Table of contents:. Introduction... 3. Installation... 4. 3. Identifying the parts... 5 General... 6 3. General functions... 7 3.
More informationOne connected to the trainer port, MagTrack should be configured, please see Configuration section on this manual.
MagTrack R Head Tracking System Instruction Manual ABSTRACT MagTrack R is a magnetic Head Track system intended to be used for FPV flight. The system measures the components of the magnetic earth field
More informationLab 5: Inverted Pendulum PID Control
Lab 5: Inverted Pendulum PID Control In this lab we will be learning about PID (Proportional Integral Derivative) control and using it to keep an inverted pendulum system upright. We chose an inverted
More informationThe operator interface consists of an LCD and eight keys. Use the interface to program and operate the triggering controller.
Nordson Corporation OPERATOR S CARD P/N 1017461C Sure Coat Triggering Controller Operator Interface WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions
More informationUser Manual. KNX MultiLight Dali. Article number: function Technology AS. Picture: KNX MultiLight products
User Manual KNX MultiLight Dali Article number: 44002 Picture: KNX MultiLight products function Technology AS Table of Contents 1 THE KNX MULTILIGHT DALI... 3 2 INTRODUCTION... 3 3 START-UP AND GENERAL
More informationTheatre lanterns. Mechanical element (yoke, casing, accessories slots/ holders) Thermal element (vents, louvres, fans, heatsinks)
Theatre lanterns Thermal element (vents, louvres, fans, heatsinks) Mechanical element (yoke, casing, accessories slots/ holders) Elect rical supply (plug and cable), lamp base, lamp Optical elements (lenses
More informationCreating Custom Fixtures
Application Note Introduction There are two types of custom fixture available within Designer: Alias Fixtures Custom Fixtures The difference between these is that an Alias fixture is a copy of a fixture
More informationSoftware User Manual
Software User Manual ElectroCraft CompletePower Plus Universal Servo Drive ElectroCraft Document Number: 198-0000021 2 Marin Way, Suite 3 Stratham, NH 03885-2578 www.electrocraft.com ElectroCraft 2018
More informationBefore you operate the inverter, the parameters that you must first program are the basic parameters.
. Main parameters Before you operate the inverter, the parameters that you must first program are the basic parameters..1 Searching for changes using the history function () : History function History
More informationGinger Compact /2500 W Tungsten. Followspot. Type: Followspot Source: 2000/2500 W Tungsten Optics: 13 to 24 zoom
f Ginger - 1417 Compact - 2000/2500 W Tungsten Type: Followspot Source: 2000/2500 W Tungsten Optics: 13 to 24 zoom Followspot Television s tungsten favourite The Ginger short throw tungsten followspot
More informationPRELIMINARY SCENIUS SPHERISCAN MYTHOS IGLOO WL / EASY / ECO SHOW-BATTEN 100 A.LEDA B-EYE K20 CC SHARPY WASH 330 PC
PRELIMINARY SCENIUS SPHERISCAN MYTHOS IGLOO WL / EASY / ECO SHOW-BATTEN 100 A.LEDA B-EYE K20 CC SHARPY WASH 330 PC SCENIUS TOTAL CONTROL OVER THE SCENE code C61500 SCENIUS is the new moving head spotlight
More information(Wireless Solution)
Wireless Solution 21.9687.1860 (Wireless Solution) 21.9687.1861 (Lumen Radio) 21.9687.1862 (City Theatrical) Wireless DMX Receivers Installation & User s Manual For use with VL440 Spot, VL770 Spot, VL880
More informationGL101B Intelligent Temperature Controller User s Guide
GL101B Intelligent Temperature Controller User s Guide 1 Caution Abnormal operating conditions can lead to one or more undesirable events that, in turn, could lead to injury to personnel or damage to the
More informationUser manuel. Hybrid stepper servo drive
User manuel Hybrid stepper servo drive 1 Overview Hybridstepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include
More informationDPC-10. DPC-10 Software Operating Manual. Table of Contents. Section 1. Section 2. Section 3. Section 4. Section 5
Table of Contents Section 1 Section 2 Section 3 Section 4 Section 5 About the Software Test Function Programming Functions Connections Basic Mode Connection RC Mode Connection Using the DPC-10 Test Functions
More informationLight is efficient Think small, play big. Light is OSRAM.
www.osram.com/kreios Light is efficient Think small, play big The only difference between Shakespeare s Hamlet on a big stage and Shakespeare s Hamlet on a small stage usually is - the size of the stage.
More informationthe coemar LED experience
the coemar LED experience LED technology has been part of the entertainment lighting industry since the mid-9s. Originally as a simple power on light indicator, LED lights have evolved to become a versatile,
More informationMeasurement and compensation of displacement errors by non-stop synchronized data collection
Measurement and compensation of displacement errors by non-stop synchronized data collection Charles Wang and Gianmarco Liotto Optodyne, Inc., Compton, California, USA Email: optodyne@aol.com Abstract
More informationCopyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic,
More informationLites PROFILE LED WHITE. Owner s and Service Manual
Lites PROFILE LED WHITE Owner s and Service Manual Read this manual carefully, and follow all instructions contained herein. File this manual for future reference. It is essential to read and follow guidelines
More informationORDERING INFORMATION
Information subject to change without notice OVERVIEW Fixture Overview High End Systems combines unprecedented light output from its 1000 watt Ultra-Brite White LED engine with a limitless palette of effects
More information6.9 Jump frequency - Avoiding frequency resonance
E581595.9 Jump frequency - Avoiding frequency resonance : Jump frequency : Jumping width Function Resonance due to the natural frequency of the mechanical system can be avoided by jumping the resonant
More informationUser manual. KNX MultiController DALI. Article number: 5410x / 5411x. function Technology AS
User manual KNX MultiController DALI Article number: 5410x / 5411x Picture: KNX MultiController DALI with Reed panel and sensor function Technology AS Table of contents 1 KNX MULTICONTROLLER... 3 2 INTRODUCTION...
More informationI.1 Smart Machines. Unit Overview:
I Smart Machines I.1 Smart Machines Unit Overview: This unit introduces students to Sensors and Programming with VEX IQ. VEX IQ Sensors allow for autonomous and hybrid control of VEX IQ robots and other
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationMTY (81)
This manual describes the option "d" of the SMT-BD1 amplifier: Master/slave electronic gearing. The general information about the digital amplifier commissioning are described in the standard SMT-BD1 manual.
More informationGL102 Intelligent Temperature Controller User s Guide
GL102 Intelligent Temperature Controller User s Guide 1 Caution Abnormal operating conditions can lead to one or more undesirable events that, in turn, could lead to injury to personnel or damage to the
More informationEET 273 Experiment Introduction to Loop Control
Now that we have calibrated and characterized all of the pieces of our system, we are ready to begin to attempt to accurately control the motor. Our system is designed to control the speed of the motor.
More informationMerlin Touring W HMI. Followspot. Type: Followspot Source: 2500 W HMI PSU: Electronic - hot restrike - DMX Optics: 3 to 12 zoom
f Merlin - 1515 Touring - 2500 W HMI Type: Followspot Source: 2500 W HMI PSU: Electronic - hot restrike - DMX Optics: 3 to 12 zoom Followspot The new touring machine for rentals Mixing a stainless steel
More informationLites PROFILE LED WHITE. Owner's and service manual
Lites PROFILE LED WHITE Owner's and service manual Read this manual throughout and carefully follow all the instructions contained. File this manual for future perusals It is essential to read and follow
More informationWhere C= circumference, π = 3.14, and D = diameter EV3 Distance. Developed by Joanna M. Skluzacek Wisconsin 4-H 2016 Page 1
Instructor Guide Title: Distance the robot will travel based on wheel size Introduction Calculating the distance the robot will travel for each of the duration variables (rotations, degrees, seconds) can
More informationScripting the ClickPAN-SDM a guide for the perplexed. Dave Mitchell Version 1.04 April 29 th 2010
Scripting the ClickPAN-SDM a guide for the perplexed Dave Mitchell www.zenoshrdlu.com/clickpansdm Version 1.04 April 29 th 2010 Contents Introduction... 2 Part 1 the sample AutoKAP scripts...3 Script Design
More information1503 Follow Spot Yoke, Source Four LED
1503 Follow Spot Yoke, Source Four LED Rev 1.0 2016 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke for source four LED Congratulations on the purchase of your City Theatrical
More informationUser Manual. *Lens tubes sold separately
User Manual *Lens tubes sold separately EDITION NOTES The Ovation E-260WW IP User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for
More informationRoboSpot Base Station
Version 2.8 RoboSpot Base Station Table of contents 1. Safety instructions... 3 2. Description of the the RoboSpot... 4 2.1 RoboSpot... 4 2.2 FollowSpot Controller... 5 3. Installation... 6 3.1 Monitor
More informationMedia Server Version 1.0 DMX Protocol
Media Server Version 1.0 DMX Protocol All Media Servers utilize the same DMX protocol with the exception of a reduced number of graphic layers in DL.2 fixtures and original Axon media servers. DL.3 and
More informationRotary Knife. [System Configuration] [Operation Overview] [Points of Control] Cutter Axis. Virtual Sheet Feed Amount Axis 1 BCN-B A
Rotary Knife [System Configuration] Mark Sensor Cutter Axis Conveyor Axis Axis 1 Axis 2 [Mitsubishi solution] PLC CPU: Q06UDEHCPU Simple Motion module: QD77MS4 Main base: Q35DB Servo amplifier: MR-J4-B
More informationA.LEDA WASH K5 A.LEDA WASH K10 A.LEDA WASH K20
ENGLISH K5 K K C6 C65 C6 INSTRUCTION MANUAL Page 5 7 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Optional accessories Technical
More informationDCS810 Brushed DC Servo Drive
Datasheet of Brushed DC Servo Drive DCS810 DCS810 Brushed DC Servo Drive 18-80VDC, 0-20A, 20-400W Based on DSP control technology and high smooth servo control algorithm Parameter visible tuning tools,
More informationUser Manual. Software Version 14
User Manual Software Version 14 GLP KNV Cube and Arc User Manual Revision A This manual covers fixture software version 14 2018 German Light Products GmbH. All rights reserved. The marks GLP and German
More informationPROFILE 500. Halogen profile-spot
PROFILE 500 Halogen profile-spot High definition profile-spot projector Suitable from 2.5mt to 20mt (4 models) Focus and zoom adjustable, slide movement Lamp access at the bottom of projector Steel yoke
More informationDMX-K-DRV-17 Integrated Step Motor Driver & Basic Controller
DMX-K-DRV-17 Integrated Step Motor Driver & Basic Controller DMX-K-DRV-17 Manual - 1 - rev 1.35 COPYRIGHT 2015 ARCUS, ALL RIGHTS RESERVED First edition, June 2007 ARCUS TECHNOLOGY copyrights this document.
More informationServoPac-A TTA-PRO Positioner
Application note April 1st, 2010 ServoPac-A TTA-PRO Positioner Hiperface/Endat absolute encoder feedback 1) INTRODUCTION This application note is dedicated to the commissioning of ServoPac-A range drives
More informationStudio Spot 575 CMY/CMY Zoom Menu Map
Studio Spot 575 CMY/CMY Zoom Menu Map AddR INFO LAMP F### C### L L STRK Change existing Fixture number or DMX start channel (Menu option selected in INFO/DMx/FIxT/SRCE) DIsplays Lamp State as, or attempting
More informationEmotion Luminaire DMX Control Protocol *
Emotion Luminaire Control Protocol * Standard Prototocol Collage/Keystone Prototocol Channel Construct Channel Construct Pan Coarse Pan Coarse 2 Pan Fine 2 Pan Fine 3 Tilt Coarse 3 Tilt Coarse Tilt Fine
More information