BIG BORE 2G chucks BB-N-EXL2G BB-AZ2G BB-FZA2G BB-EXL-SC2G
|
|
- Peregrine Howard
- 5 years ago
- Views:
Transcription
1 Clamping of pipe with IG ORE 2G chucks -Z2G -FZ2G -EXL-C2G IG ORE elf centering Extra long jaw stroke Jaw jogging IG ORE -Z2G elf centering or compensating Extra long jaw stroke afety features: : Pressure control : troke control IG ORE -FZ2G 6 jaw sequence chuck (3 centering jaws - 3 compensating jaws) Extra long jaw stroke (radial and axial) afety features: : Pressure control : Individual stroke control for each jaw ll 2G chucks Extra long jaw stroke Extra large clearance between pipe and jaws C afety features: : Pressure control for compensating jaws : Individual stroke control for each jaw C: troke control for retracted centering jaws Extra long jaw stroke for: afe loading of pipe, no hitting of the jaws afe unloading of the threaded pipe with no damage of the finished thread 260 MW-UTOLOK
2 Clamping glossary Extra long jaw stroke: The extra long jaw stroke is a long radial movement of the master jaws of the ig ore 2G chuck. It can be either a fully usable clamping jaw stroke or a combination of rapid stroke and clamping stroke. n extra long jaw stroke allows a safe loading and unloading of the pipe. Individual stroke control for each jaw: In compensating clamping mode, all 3 jaws of the ig ore 2G chucks make a different radial movement to compensate for the misalignment of the pipe to be clamped. single central jaw stroke control cannot detect if the jaw stroke on one of the master jaws bottoms out and yet cannot hold the pipe in the requested position anymore. The individual stroke control for each jaw ensures that all 3 jaws are within the correct clamping stroke and will clamp the pipe safe and accurate. The signals are picked up by proximity switches, and are monitored by the air control unit. troke control for the retracted jaws: On the 6 jaw sequence chuck ig ore FZ2G, the centering jaws are used only in static mode to align the pipes machining area to the center line of the machine. The pipe position is maintained when the compensating jaws clamp. The centering jaws are then retracted to allow the threading at the centered area. In order to make sure that the centering jaws are retracted and do not interfere with the threading tool during machining, the retracted position of the centering jaws are monitored by a stroke control system via a proximity switch. Pressure control: During the machining of a pipe, the air pressure to create the gripping force is maintained by a built in safety valve system. In case there is a drop in clamping pressure, a built in pressure control will detect the low pressure and pick up an alarm signal via a proximity switch. ll ig ore 2G chucks have such a pressure control as a standard feature. 9 MW-UTOLOK 261
3 IG ORE Front-end pneumatic power chucks EXTR LRGE THROUGH HOLE mm chuck size jaws extended extra long jaw stroke pplication/customer benefits End machining of long pipe with collars Rapid and clamping stroke for short clamping cycles Full spindle bore can be used Technical features uitable for jaw jog mode ir chuck for external clamping with built-in pneumatic cylinder ir feed via distributor ring and MW-profile seals, at stopped spindle uilt in non-return valves maintain the air pressure during machining Clamping pressure level constantly checked by a safety control system (only for external clamping) Clamping stroke control (no clamping in rapid stroke) is monitored Extra long jaw stroke (1 1/2 total) tandard equipment Ordering example 3 jaw chuck ig ore 660/Z450 2 elbow unions G 1/2 12 mounting bolts 3 lifting eye bolt, 1 set T-nuts with bolts ccessories 1 set soft top jaws Control unit C-/C-XN without distributor ring bracket (see page ) The principle invented by MW: air supply via distributor ring and MW-profile seal rings Pressure control prox. sensor (M8x1) Fig. 1 Open/close movement (only possible at stopped spindle). The profile seals deform radially under the pneumatic pressure, sealing on the chuck body and filling the cylinder chamber. When the clamping pressure is reached, the air feed is stopped, closing the non-return valve. Fig. 2 The MW-profile seals lift to the expanded position, not touching the chuck body anymore. The clamping pressure is maintained by the twin non-return valve. The chuck can start to rotate. Rapid stroke/jaw Clamping stroke/jaw Rapid and clamping stroke control Fig. 3 prox. sensors (M8x1) afety pressure control: If the pressure is less than a pre-set safety level, the switch ring moves into the proximity-switch field, sending an alarm signal. Jaw stroke control: If the part is clamped in a not correct jaw stroke position, the switch ring moves into the proximity-switch field sending an alarm signal. End machining of pipe with front and rear chucks Technical data MW-UTOLOK Type Through-hole Total stroke per jaw Rapid stroke per jaw* Clamping stroke per jaw Operating pressure min./max. Piston area Gripping force at 6 bar Max. speed ir consumption/jaw stroke at 6 bar Weight (without top jaws) Moment of inertia *must not be used for clamping Rapid stroke Clamping stroke mm mm mm mm bar 2/10 2/10 2/10 cm kn r.p.m liter kg kg m MW-UTOLOK Page 264
4 Main dimensions and technical data IG ORE Jaw position: Open for external clamping H a b J c Pressure control d e f g h * * C K E F D jaw stroke control G G1 L O P N M H1 Jaw stroke control Pressure control (O.D. clamping only) (prox. sensor (M8x1) T R U ubject to technical changes For more detailed information please ask for customer drawing enlarged illustration MW-UTOLOK Type Mounting Fixing bolts circle Thread circle 6 x M8 Pneumatic connection erration olt IO T-nuts distance erration length (Pressure control) Z310 Z450 Z700 mm mm C mm D H6 mm E mm F mm G mm M12 M12 M16 G1 mm H mm H1 mm J mm K mm L mm M mm N inch G 1/2" G 1/2" G 1/2" O mm P mm R mm mm T mm U mm a mm b mm c inch d mm M20 M20 M24 min. e mm min./max. f mm 30/84 30/107 36/150 g mm min./max. h mm 151.5/ / /300.5 α β 9x40 12x30 12x30 γ MW-UTOLOK 263
5 IG ORE Top jaws T-nuts GU Hard reversible top jaws GU 500 GU 500 GU H L T 2 x 19 2 x erration a b c kg/set J1 J2 G Hard top jaws G 500 G 500 G H L erration a b c kg/set W-D/WC-D oft top jaws N c b L a H W-D 500 W-D 500 WC H L erration a b c kg/piece For additional jaws and accessories please ask for our 150 pages special catalogue! 264 MW-UTOLOK
6 Top jaws T-nuts dapters WCL oft top jaws long version N c b L a H IG ORE WC-D 502 WC-D 502 WCL-D H L erration a b c kg NT T-nuts NT NT NT H h G M 20 M 20 M24 olt IO M20 x 40 M20 x 40 M24 x 60 dapters for IG ORE chucks IO- DIN mounting adapters pindle nose ayonet and camlock flanges are available on request 9 For additional jaws and accessories please ask for our 150 pages special catalogue! MW-UTOLOK 265
OIL AND GAS. Clamping technology for crude oil and natural gas industries
OIL AND GAS Clamping technology for crude oil and natural gas industries CRUDE OIL AND NATURAL GAS - THE ENERGY OF TODAY RÖHM is the specialist for clamping technology with a wide product range, unrivaled
More informationOverview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationJaw chuck B-Top3 STANDARD CHUCKS. 215 Variant. Jaw chuck B-Top3. Technical data. Size. B-Top3
STANDARD CHUCKS. Technical data A AJ DH AI AT AW T BQ AS Size 215 ariant B-Top3 Concentricity [mm] Max. clamping force [kn] Max. axial drawtube force [kn] RPM n max. [1/min.] Stroke per jaw [mm] Ø Capacity
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationExample workpieces: - Gearbox casing. Example format: - Diameter 800 mm
RADIAL CHUCKS SAV 260.99-RSF 3 + 3 JAW CHUCKS - 3 + 3 jaw chuck with two independently actuated clamping circles - Easily adaptable from centred to balanced operation - Jaw stroke 15 mm (Stroke per jaw)
More informationAir precision chucks APC
Air precision chucks APC MicroCentric GmbH Berblingerstr. 16 71254 Ditzingen / Germany Tel.: +49 (0)7156 17819-0 Fax: +49 (0)7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationWM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
More informationDimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding
Info Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding DIN 55026 from taper size 4 with driver. Spindle head Size C1 C2 D hole count outer olt
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
R8 COLLETS SERIES 333 : SUPERIOR IMPORT SERIES 330 : (Concentricity guaranteed to 0.000) Size 1/32** 1995502 1/16 1995104 7169005 3/32 1995106 7169010 1/8 1995108 7169012 5/32 1995110 7169015 3/16 1995112
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationP R O D U C T C A T A L O G.buckchuck.com www
P R O D U C T C A T A L O G www.buckchuck.com If a chuck s a chuck, then Why a Buck! Depth. In Experience. In Heritage. In Product. How about 75 years? That s how long Buck Chuck Company has engineered
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationHigh Precision Diaphragm Chucks
Precision Workholding Technology High Precision Diaphragm Chucks Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece
More informationN/C LATHE TOOLING F F
ATHE TOOING ATHE TOOING Collet Chuck System MEGA MICRO CHUCK PAT. Clamping diameter: ø0. - ø6.05 Smaller nut diameter than the body enables installation from the back of the toolholders in small lathes
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationMACHINE TOOL ACCESSORIES
5c expanding collets series 2: MACHINE SHOP DISCOUNT SUPPLY THREEJaw SELFCENTERING universal LATHE s SERIES 995: Reversible 2 piece jaws except where noted 5c expanding collet SETS 4 Piece Set allows internal
More informationSPIETH Locknuts. Series MSW. Works Standard SN 04.03
SPIETH Locknuts Series MSW Works Standard SN 0.03 SPIETH Locknuts Series MSW SPIETH locknuts offer a range of technical benefits, qualified by their special system and production. Under high levels of
More informationCLAMPING TECHNOLOGY SPECIAL SOLUTIONS
CLAMPING TECHNOLOGY SPECIAL SOLUTIONS BESPOKE SPECIAL SOLUTIONS You define the task and we develop and implement the solution! Special clamping chucks are tailor-made products. They are adapted to your
More informationN.A. Woodworth. Universal Ball-Lok (UBL) Chuck. The Original. Workholding Worldwide
N.A. Woodworth Workholding Worldwide The Original Universal Ball-Lok (UBL) Chuck Universal Ball-Lok (UBL) Chuck N.A. Woodworth s comprehensive line of workholding begins with the UBL. It is The Original
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationPOWER CHUCKS. 3-Jaw Large Thru Hole 3-Jaw Extra Large Thru Hole 3-Jaw Closed Center
3-Jaw Large Thru Hole 3-Jaw Extra Large Thru Hole 3-Jaw Closed Center TMX Power s DESIGNED AND ENGINEERED FOR PRECISION Featuring the quality and precision associated with European manufacturing, TMX Power
More informationBUCK PRODUCT CATALOG
PRODUCT CATALOG Table of Contents Technical Information. Why a BUCK?...3 Manual Chuck Selection...5 Spindle Identification for Mounting Plates...6 Obsolete Chuck Crossover...7 Parts Breakdown...8 ATSC
More informationWORKHOLDING TECHNOLOGIES
ITC WORKHOLDING TECHNOLOGIES Expanding Mandrels and Collet Chucks INDUSTRIAL TOOLS CORPORATION n 54/14, D-II, M.I.D.C., Chinchwad, Pune - 411 019. Tel.: 020-7474394, 7470844 n 302, Vicky Apartment, P.
More information2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES S)
2-JAW ELF-CENTERING PARALLEL PNEUMATIC GRIPPER (ERIE ) Hanover IF Design Award Winner. Modular with Gimapick ystem. Double-acting (single-acting on request). Bottom porting is available. High gripping
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationTooling For Haas Lathes
Tooling For Haas Lathes Performance measured by you Visit Command Tooling Systems on line catalog for Command standard product part file downloads, up-to-date stock levels and our list price instant quoting
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
5C EXPANDING COLLETS SERIES 2: Tel: 205884 / Fax: 20597 50 Huyler St / So. Hackensack, NJ 070 USA THREEJAW SELFCENTERING UNIVERSAL LATHE CHUCKS SERIES 995: Reversible 2 piece jaws except where noted 5C
More informationCircular welding units Circular welding unit model Z (Pneumatic Torch Positioner)
ircular welding units ircular welding unit model Z-0006-598 (Pneumatic Torch Positioner) Torch stand / 20 Stroke vertical: 290 mm Stroke horizontal: 770 mm Max loading: 30 kg part no. 019.0.0305 Pivot
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationlinear/swivel clamp CLR Operating instructions e [ ]
linear/swivel clamp CLR en Operating instructions 8072624 2017-05e [8072626] Translation of the original instructions CLR-EN Identification of hazards and instructions on how to prevent them: Danger Immediate
More informationPPC Series Precision Power Chucks
Precision Workholding Technology PPC Series Precision Power Chucks www.microcentric.com The World s Most Accurate Power Chuck Improve productivity and lower costs by enhancing workpiece quality...... through
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationCentering and Clamping Devices
Product Range External Alignment Clamps Type 1a for quick and accurate alignment of pipes of equal or differing diameters on a common center line automatic diameter compensation, no need for additional
More informationValve repair and testing technique
High standard in precision. Valve repair and testing technique Quality Made in Germany by GmbH & Co. KG Grinding and Lapping Machines for Industrial Valves VENTA Portable grinding and lapping machines
More informationThe Original UBL. N.A. Woodworth. Universal Ball-Lok Chuck SUPPORTED BY FORKARDT. Workholding Worldwide
The Original N.A. Woodworth Workholding Worldwide SUPPORTED BY FORKARDT UBL Universal Ball-Lok Chuck Universal Ball-Lok (UBL) Chuck N.A. Woodworth s comprehensive line of workholding begins with the UBL.
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
More informationHow-To Set-Up Vise Sensors, Omil-8mm Sensors Step 1 - Summary
How-To Set-Up Vise Sensors, Omil-8mm Sensors Step 1 - Summary Vise sensors are used during operation to detect part or jaw fumbles. For example, empty jaws loaded into the vise, jaws loaded with a part
More informationTurret covers. Rear turret cover
TURRET Refer to the Maintenance Manual -M-314A for more information. Introduction The turret is mounted on top of the cross slide. The turret top plate is raised (unclamped) and lowered (clamped) by pneumatic
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationVISES VISES JAWS CENTERING CLAMP BASE PLATE COMPACT PNEUMATIC VISE PAIR OF CLAMPS PAIR OF POSITIONING KEYS PAIR OF POSITIONING KEYS VISES
CENTERING CLAMP JAWS BASE PLATE Part No. CP170 Part No. CP175 Part No. CP179 COMPACT PNEUMATIC VISE Part No. AMLFV-S PAIR OF CLAMPS Part No. MVAC-CS PAIR OF POSITIONING KEYS Part No. MVAC-SK PAIR OF POSITIONING
More informationVertical and horizontal Turning/Grinding Centers
Vertical and horizontal Turning/Grinding Centers INDEX Turning/Grinding Centers Turning and grinding of course with INDEX The INDEX Turning/Grinding Centers combine the advantages of turning and grinding
More informatione-cylinder Saves energy and cash ENERGY EFFICIENCY
e-cylinder Saves energy and cash ENERGY EFFICIENCY Calculation example for energy and time saving ENERGY EFFICIENCY Sample calculation for energy savings with an electrical cylinder: Energy consumption
More informationEfficient workholding. Collet Chucks Mandrels Collets
TM Efficient workholding ollet hucks Mandrels ollets Index ollet huck Index of Klamp Products ollet hucks Q & Series Page 3 Quick hange ollet hucks QRL Series Page 4-7 Short Series ollet hucks RS Series
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic Swivel clamps, double action Operating pressure max. 250 bar Hydraulic swivel clamps are particularly designed for applications which require high clamping forces and
More information2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS)
PS 2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS) Double-acting radial motion. The gripping force is constant throughout the entire stroke (from 0 to 90, both opening and closing). Lightweight:
More information5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationPATENT EP Compensating Chuck Retractable OVEKAV / OVARZV
PATENT EP1 190 815 Compensating Chuck Retractable OVEKAV / OVARZV COMPENSATING CHUCK - RETRACTABLE The OVEKAV / OVARZV retractable compensating chucks made by SwissChuck are unique! These chucking systems
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationPneumatic Chuck ROTA TP / ROTA TP-LH
Translation of the original manual Pneumatic Chuck ROTA TP / ROTA TP-LH Assembly and operating manual Superior Clamping and Gripping Imprint Copyright: Imprint This manual is protected by copyright. The
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More information[ means: One-stop shop. EMCOMAT FB-450 L / FB-600 L. Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle
[ E[M]CONOMY] means: One-stop shop. EMCOMAT FB-450 L / FB-600 L Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle EMCOMAT FB-450 L / FB-600 L Whether single or small series production,
More informationWM en. Zero point clamping system system 3000
Zero point clamping system system 3000 unique push-on very strong automatic monitoring flush mounted SPEEDY and spigot handling without interfering contour 50kN retention force suitable for automation
More information2-jaw parallel self-centering pneumatic gripper (series PE)
PE -jaw parallel self-centering pneumatic gripper (series PE) Double acting (single acting upon request for PE-5... and PE-5...). High efficiency and reliability due to the lack of driving parts. Wide
More informationHow-To Set-Up Vise Sensors, Schunk- 5mm Sensors Step 1 - Summary
How-To Set-Up Vise Sensors, Schunk- 5mm Sensors Step 1 - Summary Vise sensors are used during operation to detect part or jaw fumbles. For example, empty jaws loaded into the vise, jaws loaded with a part
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationPower Workholding. Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling
Power Workholding Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling OUR STORY In 1982 an independent joint venture was established to marry the proven product expertise
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More information2-jaw self centering rocking pneumatic gripper (series GW)
2-jaw self centering rocking pneumatic gripper (series ) Double acting. Long life and reliability, maintenance free. Various options for fastening. Optional proximity magnetic sensors. Spring closed (-NC)
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationDouble Spindle Double Turret Multi-Tasking Turning Center DT42 DT52. Turning Precision Into Perfection
Double Spindle Double Turret MultiTasking Turning Center Turning Precision Into Perfection Machine Highlights Front Machining VDI 3 12Stations Up to 24 tools 7.5/11 Spindle Power D 55 Through Hole C Back
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More informationSCHMIDT HydroPneumaticPress
Maximum orce Range from 15 kn to 220 kn / 3,375 lbs. to 49,460 lbs. The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for optimally transforming, joining and assembling within
More informationFacing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
More informationClamping systems 9.2
9. Clamping systems Clamping systems Clamping system produced in the form of collet chucks, clamping arbors, hydro sleeves and special sleeves. Clamping elements are designed for precise locating of tools
More informationFisher 667 Diaphragm Actuators Size 80 and 100
Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...
More information2.0. Retaining Elements. Flange Adapters. Adjustable Flange Adapters. Reducing Adapters. Reducing Sleeves. Adaption of Clamping Device
2.0 Retaining Elements Flange Adapters Adjustable Flange Adapters Reducing Adapters Reducing Sleeves Adaption of Clamping Device Special Adapters NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationPATENT EP COMPENSATING CHUCKS OVEKA & KA
PATENT EP1 190 815 COMPENSATING CHUCKS OVEKA & KA COMPENSATING CHUCKS For centric cylindrical, orbital pin or form grinding of complex shaft-type components, the workpiece is generally ground between centers.
More informationCM6200 MILLING MACHINE
CM6200 MILLING MACHINE PORTABLE ON - SITE MACHINING SOLUTIONS FOR LARGE FLANGE MACHINING Quality Machine Design Provides Rigid, Power-Packed Performance Extraordinarily rigid design ensures consistent,
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: Lifter-Tru Kit for Ford Windsor & SVO Small Block V8 Page 1 of 5 Kit Contents: 2x End Plates 2x 5/8 Threaded Adjustment Sleeves 1x Front Angle Bracket 2x 5/8 Adjustment Sleeve Spacers * 1x
More informationvariety of cuts including chamfers, O-Ring grooves, lens rings and other angular surfaces.
FF6300 FLANGE FACER 6 2015 FF63 Performance. Versatility. Safety. The rigid and versatile FF6300 delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently
More informationHardinge FlexC Dead-Length Collet System Style DL. Installation Instructions and Parts Lists. FlexC Collet System Style DL Instructions B-152
Hardinge FlexC Dead-Length Collet System Style DL Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationCNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationSG100XY. Large Capacity Cylinder Head Seat & Guide Machine. With ACTIV Spindle & Guide-to-Guide Automation
SG100XY Large Capacity Cylinder Head Seat & Guide Machine With ACTIV Spindle & Guide-to-Guide Automation your machining time, productivity and profits! Machining Equipment Created for Performance Racing
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter
More informationProduct Information. Deburring spindle FDB-AC
Product Information FDB-AC FDB-AC Compliant. Reliable. Flexible. FDB-AC deburring spindle Flexible deburring spindle for use in robotic applications Field of application Standard solution for flexible
More informationPrice $ $ $ Filtered compressed air, lubricated or non-lubricated
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS-P) Double-acting radial motion. The gripping force is constant through the entire stroke (from 0 to 90, both opening and closing). Lightweight:
More informationCatalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits
Catalog 2014/2015 aw blades & knives s pare parts WOOD CHOICE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B I T Welcome to the 2014/2015 catalog Dear customer, Thank you for your
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationFBL-250Y/320Y/SY Series. CNC Turning-Milling Machines Linear/Box Way
FNLY/2Y/SY Series FBLY/2Y/SY Series CNC TurningMilling Machines Linear/Box Way Multifunctional Turning and Milling Excellence FNLY/2Y/SY Linear Way Series FBLY/2Y/SY Box Way Series CNC TurningMilling Machines
More informationIllustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 4927 Hydraulic Lift Package For Sweep Master (All Hardware In Hardware
More information2-jaw parallel self-centering pneumatic gripper (series GM)
GM -jaw parallel self-centering pneumatic gripper (series GM) Double acting. The rugged construction lends itself to heavy duty applications for a trouble free long life without maintenance. Wide choice
More informationCUTEX Chucker Horizontal Turning Center
CUTEX-160 6-8 Chucker Horizontal Turning Center 2 Hwacheon catalog : CUTEX-160 1 Horizontal Turning Centers 3 6-8 Chucker Horizontal Turning Center 6 8" Horizontal Turning Center The fast turret indexing
More informationTechnical Manual. ETP-CLASSIC incl type R. Content
Technical Manual ETP-CLASSIC incl type R Content Technical parts description...2 Mounting/dismantling tips...4 Design suggestions...7 Tolerances...13 Central bolt...15 Torsional stiffness...16 Screw pitch
More information.. 8. 2. 9. 22. 0.. 2.. 2. 2.... 28. 29.... 8. 9. PBL Universal Ball-Lock Power Castings or forgings can be.d. or I.D. clamped Grips on taper up to 0 Jaws pivot up to to grip on uneven surfaces Ideal for
More informationHardinge FlexC Dead-Length Collet System Style DL 80mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 80mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationM1 series 2 way ball valve with integrated Praher Labeling System
General: Material: PVC-U Seal material: EPDM / FPM Ball seating joint: PTFE Dimensions: DN10 DN50 d16 d63 d3/8 d2 Connection types: Solvent socket DIN / ASTM / JIS Solvent spigot DIN Threaded socket BSP
More informationVSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
More informationVBXC CONFIGURATION AND PROCESS CONTROL MANUAL
VBXC CONFIGURATION AND PROCESS CONTROL MANUAL SOFTWARE VERSION 2.4 DOCUMENT #D10008 REVISION: A OCTOBER 2018 All rights reserved. No patent liability is assumed with respect to the use of the information
More information