±18V Operation 2-Channel Electronic Volume. Selectable 8-Chip Address Available for using eight chips on same serial bus line
|
|
- Shannon Quinn
- 6 years ago
- Views:
Transcription
1 ±18V Operation 2-Channel Electronic Volume MUSES7232 GENERAL DESCRIPTION The MUSES7232 is a ±18V operation 2-channel electronic volume, which is optimized for high-end audio and professional audio applications with advanced circuitry and layout. The MUSES7232 performs low noise and low distortion characteristics and with resistance ladder circuit. All of functions are controlled via three-wired serial bus. Selectable 8-Chip address is available for using eight chips on same serial bus line. It s suitable for highly linear volume control of Hi-fi audio systems. PACKAGE OUTLINE MUSES7232V FEATURES Operating Voltage ±8.5 to ±18V 3-Wired Serial Control Chip Address Select Function Selectable 8-Chip Address Available for using eight chips on same serial bus line Low Output Noise *It conforms to the characteristic of an external operational amplifier. Low Distortion *It conforms to the characteristic of an external operational amplifier. Volume db to 111.5dB /.25dBstep, MUTE 31.5 to db /.5dBstep Channel Separation -12dB typ. Zero Cross Detection circuit Detection CMOS Technology Package Outline SSOP32 BLOCK DIAGRAM V Zero Cross Detection Control Logic Z/C D_VDD V- DATA LATCH ADR1 CLOCK ADR ADR2 D_REF Ver. 1.1E 1
2 PIN FUNCTION No. SYMBOL FUNCTION No. SYMBOL FUNCTION 1 Z/C REFL Lch Zero Cross Detection circuit Reference Voltage 17 D_VDD Digital block Power Supply 2 L_REF Lch Reference Voltage 18 DATA Control data signal input 3 L Lch Opamp non-inverting input connect terminal 19 CLOCK Clock signal input 4 L_REF Lch Reference Voltage 2 LATCH Latch signal input 5 L- Lch Opamp inverting input connect terminal 21 D_REF Digital block Reference Voltage 6 L_REF Lch Reference Voltage 22 V Power Supply () 7 OutL Lch output 23 InR Rch input 8 DCCAP_L Switching noise rejection capacitor (Lch) 24 V Power Supply () 9 DCCAP_R Switching noise rejection capacitor (Rch) 25 V - Power Supply (-) 1 OutR Rch output 26 InL Lch input 11 Rch Reference Voltage 27 V - Power Supply (-) 12 R- Rch Opamp inverting input connect Digital block Noise Rejection 28 D_CAP terminal Capacitor terminal 13 Rch Reference Voltage 29 ADR2 Chip address setting terminal 2 14 R Rch Opamp non-inverting input connect terminal 3 ADR1 Chip address setting terminal 1 15 Rch Reference Voltage 31 ADR Chip address setting terminal 16 Z/C REFR Rch Zero Cross Detection circuit Zero Cross Detection circuit ON/OFF 32 Z/C Reference Voltage setting terminal 2
3 ABSOLUTE MAXIMUM RATING (Ta=25 C) PARAMETER SYMBOL RATING UNIT Power Supply Voltage V /V - 2/-2 V Maximum Input Voltage V IM V /V - V Power Dissipation P D 1 NOTE: EIA/JEDEC STANDARD Test board (76.2x114.3x1.6mm, 2layer, FR-4) mounting Operating Temperature Range Topr -4 ~ 85 C Storage Temperature Range Tstg -4 ~ 125 C mw ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Power Supply (Ta=25 C, V /V - = 15V, unless otherwise specified) Operating Voltage V /V V Supply Current 1 I CC No signal ma Supply Current 2 I EE No signal ma Input/Output Characteristics 1 (Ta=25 C,V /V - = 15V, V IN=2Vrms, f=1khz, Volume=dB, Gain=dB, V OUT with MUSES1, R L=47kΩ, unless otherwise specified) Maximum Input Voltage V IM f=1khz,thd=1% Volume=-2dB Vrms Voltage Gain 1 G V1 V IN=2Vrms, f=1khz db Voltage Gain 2 G V2 V IN=2mVrms, f=1khz Gain=15dB db Voltage Gain Error 1 G V1 V IN=2Vrms, f=1khz db Voltage Gain Error 2 Maximum Attenuation Mute level Channel Separation 1 G V2 A TT Mute CS1 V IN=2Vrms, f=1khz Volume=-6dB V IN=4Vrms, f=1khz Volume=-111.5dB, A-weight f=1khz, V IN=4Vrms Volume=Mute, A-weight f=1khz, V IN =2Vrms, Rg=Ω A-weight db db db db Channel Separation 2 CS2 f=2khz, V IN =2Vrms, Rg=Ω db Input Impedance R IN 23pin, 26pin kω Input/Output Characteristics 2 (Ta=25 C,V /V - = 15V, V IN=2Vrms, f=1khz, Volume=dB, Gain=dB, V OUT with MUSES1, R L=47kΩ, unless otherwise specified) Maximum Output Voltage Total Harmonic Distortion 1 Total Harmonic Distortion 2 V OM THD1 THD2 f=1khz,thd=1% Volume=-6dB, Gain=6dB f=1khz,v IN=1Vrms BW=4Hz-3kHz f=1khz,v IN=1Vrms BW=4Hz-3kHz Vrms % % 3
4 ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Input/Output Characteristics 3 (Ta=25 C, V /V - = 15V, V IN=2Vrms, f=1khz, Volume=dB, V OUT : 3pin, 14pin, R L=1kΩ, unless otherwise specified) Output Noise1 V NO1 Rg=Ω, A-weight - Output Noise2 Logic Control Characteristics V NO2 Volume=-111.5dB Rg=Ω, A-weight (1.26μ) -118 (1.26μ) -1 (1μ) - dbv (Vrms) dbv (Vrms) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Digital block Power Supply Characteristics D_VDD Terminal Input Voltage V DVDD 17pin Terminal Input - -.8*V V D_REF Terminal Input Voltage V DREF 21pin Terminal Input V V Digital block Supply Voltage V DD V DD = V DVDD V DREF V Range Logic Control Terminal Characteristics (Ta=25 C, V /V - = 15V, V DREF =V, unless otherwise specified) High Level Input Voltage1 V IH1 DATA, CLOCK, LATCH.7*V DD - V DD V Low Level Input Voltage1 V IL1 DATA, CLOCK, LATCH -.3*V DD V Chip Address / Zero cross Terminal Characteristics (Ta=25 C, V /V - = 15V, V DREF =V, unless otherwise specified) High Level Input Voltage2 V IH2 ADR, ADR1, ADR2, Z/C.7*V DD - V V Low Level Input Voltage2 V IL2 ADR, ADR1, ADR2, Z/C -.3*V DD V 4
5 TERMINAL DESCRIPTION PIN NO. SYMBOL FUNCTION EQUIVALENT CIRCUIT V TERMINAL DC VOLTAGE InR InL Rch input Lch input 1Ω 2kΩ V L_REF L_REF Lch Reference Voltage Rch Reference Voltage V 1.5kΩ V V 3 14 L R Lch Opamp non-inverting input connect terminal Rch Opamp non-inverting input connect terminal V V 5 12 L- R- Lch Opamp inverting input connect terminal Rch Opamp inverting input connect terminal V 5
6 TERMINAL DESCRIPTION PIN NO. SYMBOL FUNCTION EQUIVALENT CIRCUIT TERMINAL DC VOLTAGE V 1Ω 7 1 OutL OutR Lch output Rch output V V 8 DCCAP_L Switching noise rejection capacitor (Lch) 9 DCCAP_R Switching noise rejection capacitor (Rch) 1.5kΩ V V V 16 1 Z/C REFR Z/C REFL Rch Zero Cross Detection circuit Reference Voltage Lch Zero Cross Detection circuit Reference Voltage 4kΩ 4kΩ V V DATA CLOCK LATCH Control data signal input Clock signal input Latch signal input 2Ω - 6
7 TERMINAL DESCRIPTION PIN NO. SYMBOL FUNCTION EQUIVALENT CIRCUIT D_VDD V V 125kΩ TERMINAL DC VOLTAGE 21 D_REF Digital block Reference Voltage - 125kΩ V V 125kΩ 17 D_VDD Digital block Power Supply - 125kΩ D_REF V Power Supply () V V V Z/C ADR2 ADR1 ADR Zero Cross Detection circuit ON/OFF setting terminal Chip address setting terminal 2 Chip address setting terminal 1 Chip address setting terminal 1Ω - V 28 D_CAP Digital block Noise Rejection Capacitor terminal 1Ω V 7
8 TEST CIRCUIT 1 Supply Current 1 (I CC), Supply Current 1 (I EE) V- V V V V V 15V A I EE A I CC 15V LATCH CLOCK DATA VDD Z/C ADR ADR1 ADR2 V- 5V RD k 1 F R D k D_CAP A_VEE A_VEE A_VCC A_VCC D_REF D_VDD Ref = 4V Control Logic 2k 2k L_REF 1k 1k Z/C REFL L_REF L_REF L_REF Z/C REFR TEST CIRCUIT 2 Maximum Input Voltage (V IM), Maximum Output Voltage (V OM), Voltage Gain 1 (G V1), Voltage Gain 2 (G V2), Maximum Attenuation (A TT), Mute level Mute), Total Harmonic Distortion 1(THD1), Total Harmonic Distortion 2(THD2) V V V V V- V LATCH CLOCK DATA VDD V IN 15V 15V V IN Z/C ADR ADR1 ADR2 V- 5V RD k 1 F R D k D_CAP A_VEE A_VEE A_VCC A_VCC D_REF D_VDD Ref = 4V Control Logic 2k 2k L_REF 1k 1k Z/C REFL L_REF L_REF L_REF Z/C REFR 1pF 1pF MUSES1 MUSES892 V OUT V R L=47k V OUT V MUSES1 MUSES892 R L=47k 8
9 TEST CIRCUIT 3 Output Noise 1(V NO1), Output Noise 1(V NO2) V- V V V V V LATCH CLOCK DATA VDD 15V 15V Z/C ADR ADR1 ADR2 V- 5V R D k 1 F RD k D_CAP A_VEE A_VEE A_VCC A_VCC Ref = 4V D_REF D_VDD Control Logic 2k 2k L_REF 1k 1k Z/C REFL L_REF L_REF L_REF Z/C REFR V OUT (Filter: A-weght) V R L=1k V OUT (Filter: A-weght) V R L=1k TEST CIRCUIT 4 Channel Separation 1(CS1), Channel Separation 2(CS2) V V V V V- V LATCH CLOCK DATA VDD 15V 15V V IN Z/C ADR ADR1 ADR2 V- 5V RD k 1 F R D k D_CAP A_VEE A_VEE A_VCC A_VCC D_REF D_VDD Ref = 4V Control Logic 2k 2k L_REF 1k 1k Z/C REFL L_REF L_REF L_REF Z/C REFR 1pF 1pF MUSES1 MUSES1 V OUT V R L=47k R L=47k 9
10 APPLICATION CIRCUIT <Application circuit with J-FET Input type OpAmp.> InL InR LATCH CLOCK DATA VDD V F CIN V- V CIN F 5V Caution!! RD k 1 F RD k Z/C ADR ADR1 ADR2 D_CAP A_VEE A_VEE A_VCC A_VCC Ref = 4V D_REF D_VDD Control Logic 2k 2k L_REF 1k 1k Z/C REFL L_REF L_REF L_REF Z/C REFR 1pF 1pF J-FET Input type MUSES1, MUSES892, NJM891, NJM282,, etc J-FET Input type MUSES1, MUSES892, NJM891, NJM282,, etc OutL OutR <Application circuit with Bipolar Input type OpAmp.> InL InR LATCH CLOCK DATA VDD V- Caution!! F CIN V- V C IN F 5V R D k 1 F R D k Z/C ADR ADR1 ADR2 D_CAP A_VEE A_VEE A_VCC A_VCC Ref = 4V D_REF D_VDD Control Logic 2k 2k L_REF 1k 1k Z/C REFL L_REF L_REF L_REF Z/C REFR R bias * 47k 1pF Bipolar Input type MUSES2, MUSES882, NJM88,NJM2114, 47 NJM5532,NJM268, NJM458, etc OutL 47 OutR 1pF Bipolar Input type MUSES2, MUSES882, NJM88,NJM2114, NJM5532,NJM268, NJM458, etc R bias * 47k 1
11 NOTES It is necessary to add R D to 1k for the over-current protection. Without this resistor, the IC may be damaged, depending on the power procedure. 15V V V V No Current Current flow s 5V D_VDD 125kΩ 5V D_VDD 125kΩ 125kΩ 125kΩ D_REF D_REF a) The power[v] is greater than the power[d_vdd]. b) The power[v] is less than the power[d_vdd]. Fig.1 Damaged path of the MUSES7232 The input coupling capacitors(c IN) and the input resistance(r IN=2k ) form a high-pass filter with the corner frequency determined in [fc=1/(2 R INC IN)]. The R bias affects the Volume(Att.) linearity characteristic. When R bias value is too small, the amount of attenuation increases, so that the output amplitude becomes small and THD deteriorates by an internal analog switch. On the other hand, when R bias is too large, it may be affected at the noise from the outside. Please decide resistance value after it verifies it enough by an actual application. Separate for REF terminals for High and Middle voltage(ac) and REF terminals for Low voltage(ac) in the pattern design. Pin No. Function Purpose 2 Lch Reference Voltage for Low voltage(ac) signal 4 Lch Reference Voltage for Middle voltage(ac) signal 6 Lch Reference Voltage for High voltage(ac) signal 11 Rch Reference Voltage for High voltage(ac) signal 13 Rch Reference Voltage for Middle voltage(ac) signal 15 Rch Reference Voltage for Low voltage(ac) signal Table.1 Purpose of Reference Voltage Terminal 11
12 CONTROL DATA FORMAT t7 t1 t4 t8 LATCH t2 t3 CLOCK MSB LSB DATA D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D ( ) MSB First t5 t6 Note.) Set CLOCK in High to prevent incorrect operation during a standby period. SYMBOL PARAMETER MIN TYP MAX UNIT t1 CLOCK Clock Width sec t2 CLOCK Pulse Width (High) sec t3 CLOCK Pulse Width (Low) sec t4 LATCH Rise Hold Time sec t5 DATA Setup Time sec t6 DATA Hold Time sec t7 CLOCK Setup Time sec t8 LATCH High Pulse Width sec CONTROL DATA MUSES7232 control data is constructed with 16bits. MSB D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D MSB Data Select Address Chip Address D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D Lch Volume Control (Att.) * * * Lch Volume Control (Gain) 1 * * * Rch Volume Control (Att.) 1 * * * Rch Volume Control (Gain) 1 1 * * * L/R Cont 1 L/R Cont 2 Z/C Don t Care Don t Care Don t Care Don t Care LSB LSB Don t Care 1 * * * * Chip address is set by chip address select terminals (ADR, ADR1,ADR2) status. Chip address select terminal Chip address ADR2 (29pin) ADR1 (3pin) ADR (31pin) D3 D2 D1 D Low Low Low Low Low High 1 Low High Low 1 Low High High 1 1 High Low Low 1 High Low High 1 1 High High Low 1 1 High High High
13 INITIAL CONDITION MSB D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D * * * 1 * * * 1 * * * 1 1 * * * 1 * * * Note.) This product starts up by MUTE setting in power ON. Use it after removing MUTE of each setting. If any audio signal is inputted in input signal terminal before power ON, it may cause initial condition abnormality. In conditions of use such as the above, it prevents that abnormality by setting MUTE before power OFF" LSB 13
14 DEFINITION OF RESISTOR Volume Control (Att.) : db to 111.5dB /.5dBstep. : Lch Volume and Rch Volume are controlled independently when L/R Cont 1 =. D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D Lch Volume Control (Att.) * * * * Rch Volume Control (Att.) 1 * * * * < Volume Control Data > Data Setting D15 D14 D13 D12 D11 D1 D9 D8 Mute ( ) 1 db dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 1-8.dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 14
15 < Volume Control Data > Data Setting D15 D14 D13 D12 D11 D1 D9 D dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 15
16 < Volume Control Data > Data Setting D15 D14 D13 D12 D11 D1 D9 D dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 1-56.dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 16
17 < Volume Control Data > Data Setting D15 D14 D13 D12 D11 D1 D9 D dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 17
18 < Volume Control Data > Data Setting D15 D14 D13 D12 D11 D1 D9 D dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Mute ( ) Initial Setting 18
19 Volume Control (Gain.) : 31.5dB to db /.5dBstep. : Lch Volume and Rch Volume are controlled independently when L/R Cont 2 =. D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D Lch Volume Control (Gain) 1 * * * Rch Volume Control (Gain) 1 1 * * * < Volume Control Data > Data Setting D14 D13 D12 D11 D1 D9 D8 db () 1.25dB 1.5dB 1 1.dB dB 1 2.dB dB dB dB 1 4.dB dB dB dB dB dB dB dB 1 8.dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 1 16.dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB 19
20 < Volume Control Data > Data Setting D14 D13 D12 D11 D1 D9 D dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB ( ) Initial Setting 2
21 L/R Cont 1 L/R Cont 2 Z/C : Select the independent control or the Lch-Rch link control of the method of the volume control (Att). : Select the independent control or the Lch-Rch link control of the method of the volume control (Gain). : Zero Cross Detection circuit ON/OFF setting D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D L/R Cont 1 L/R Cont 2 Z/C Don t Care Don t Care Don t Care <L/R Cont 1 : Method of the volume control (Att).> D15 Setting Don t Care Lch, Rch independent control ( ) 1 Lch-Rch link control ( ) Initial Setting <L/R Cont 2 : Method of the volume control (Gain).> D14 Setting Lch, Rch independent control ( ) 1 Lch-Rch link control ( ) Initial Setting * Command table when Lch, Rch interconnected control Don t Care 1 * * * D15 D14 D13 D12 D11 D1 D9 D8 D7 D6 D5 D4 D3 D2 D1 D Lch-Rch link control (Att.) * * * Lch-Rch link control (Gain) 1 * * * No Acceptable 1 * * * No Acceptable 1 1 * * * <Z/C : Zero Cross Detection circuit ON/OFF setting > D13 Setting Zero Cross Detection circuit: ON ( ) 1 Zero Cross Detection circuit: OFF ( ) Initial Setting * Zero cross detection circuit is ON When "Z/C terminal = Low" and "Z/C bit =" are set. Z/C bit ( D13") 1 Z/C terminal (32pin) Low High Zero Cross Detection circuit : ON Zero Cross Detection circuit : OFF Zero Cross Detection circuit : OFF Zero Cross Detection circuit : OFF 21
22 Volume Control (Att).25dB to dB(.25dB/step) setting example Using Volume Control(Gain).25dB enables to set.25db/step in the range of.25db to 111.5dB. (8.25dB, 16.25,24.25 also can be used) < Volume Control Data > Lch / Rch Volume Control (Gain) Lch / Rch Volume Control (Att) D14 D13 D12 D11 D1 D9 D8 D15 D14 D13 D12 D11 D1 D9 D8 Gain Setting dB dB dB dB dB dB dB dB dB dB : : dB dB dB 1 1.5dB dB 1 db dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB : : dB dB dB dB dB dB Mute : : : : : : : : 22
23 Maximum Input Voltage [Vrms] Maximum Input Voltage [Vrms] ICC [ma] IEE [ma] ICC [ma] IEE [ma] MUSES7232 TYPICAL CHARACTERISTICS ICC vs Supply Voltage No signal IEE vs Supply Voltage No signal o C 85 o C o C o C o C o C Supply Voltage [±V] ICC vs Ambient Temperature V=±15V, No signal Supply Voltage [±V] IEE vs Ambient Temperature V=±15V, No signal Ambient Temperature [ o C] Maximum Input Voltage vs Frequency V=±15V, THD=1%, VOL=-2dB, GAIN=dB Ambient Temperature [ o C] Maximum Input Voltage vs Ambient Temperature V=±15V, THD=1%, VOL=-2dB, GAIN=dB 11 1 ±15V o C -4 o C 9 8 ±12V 7 85 o C Frequency [Hz] 6 ±8.5V Ambient Temperature [ o C] 23
24 Volume Resolution [db] Volume Resolution [db] Volume Gain Output Error [db] Volume Gain Output Error [db] Volume Gain Output [db] Volume Gain Output [db] MUSES7232 Volume Gain Output vs Volume Setting V=±15V, f=1khz, Vin=4Vrms, GAIN=dB, Bandpass Volume Gain Output vs Frequency V=±15V, f=1khz, Vin=4Vrms, GAIN=dB, Bandpass 2 db -16-2dB , 25, 85 o C dB -6dB -8dB -1dB dB Mute Volume Setting [db] Volume Gain Output Error vs Volume Setting V=±15V, f=1khz, Vin=4Vrms, GAIN=dB, Bandpass Frequency [Hz] Volume Gain Output Error vs Volume Setting V=±15V, f=1khz, Vin=1mVrms, VOL=dB, Bandpass o C 25 o C.5-4, 25, 85 o C o C Volume Setting [db] Volume Resolution vs Volume Setting V=±15V, f=1khz, Vin=4Vrms, GAIN=dB, Bandpass Volume Setting [db] Volume Resolution vs Volume Setting V=±15V, f=1khz, Vin=1mVrms, VOL=dB, Bandpass , 25, 85 o C -4, 25, 85 o C Volume Setting [db] Volume Setting [db] 24
25 Maximum Output Voltage [Vrms] Maximum Output Voltage [Vrms] Input Resistance [kω] Output Resistance [kω] Volume Matching Error [db] Volume Matching Error [db] MUSES Volume Matching Error vs Volume Setting V=±15V, f=1khz, Vin=4Vrms, GAIN=dB, Bandpass Volume Matching Error vs Volume Setting V=±15V, f=1khz, Vin=1mVrms, VOL=dB, Bandpass , 25, 85 o C.5-4, 25, 85 o C Volume Setting [db] Input Resistance vs Volume Setting V=±15V, No signal, Measure:InL Volume Setting [db] Output Resistance vs Volume Setting V=±15V, No signal, Measure:L o C 8 85 o C o C o C 2-4 o C Volume Setting [db] Volume Setting [db] Maximum Output Voltage vs Frequency V=±15V, THD=1%, VOL=-6dB, GAIN=6dB Maximum Output Voltage vs Ambient Temperature V=±15V, THD=1%, VOL=-6dB, GAIN=6dB o C 1 ±18V 1 8 ±15V o C 6 ±8.5V 85 o C Frequency [Hz] Ambient Temperature [ o C] 25
26 [CAUTION] The specifications on this databook are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 26
8-CHANNEL ELECTRONIC VOLUME WITH INPUT SELECTOR ~ -95dB/0.5dBstep, MUTE. Multi-LSin LSout Stereo Lin ( 7) REC _L.
8-CHANNEL ELECTRONIC VOLUME WITH INPUT SELECTOR GENERAL DESCRIPTION The NJU7234A is a 8-channel electronic volume with Input. It includes 8-in 2-out audio selector, REC Output and Multi-channel inputs.
More informationNJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic Volume GENERAL DESCRIPTION The NJU7 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU7 has many characteristics that are useful in audio application,
More informationNJW CHANNEL ELECTRONIC VOLUME WITH INPUT SELECTOR
6-CHANNEL ELECTRONIC VOLUME WITH INPUT SELECTOR GENERAL DESCRIPTION is a 6-channel electronic volume IC. It includes Input selector, tone control, volume, mute, input selector gain control, volume output
More information7-INPUT / 3-OUTPUT DUAL ANALOG SWITCH
7-INPUT / 3-OUTPUT DUAL ANALOG SWITCH GENERAL DESCRIPTION The NJU72750A is a 7-input / 3-output dual analog switch. Functions are controlled via two-wired serial bus. A-channel switches and B-channel switches
More informationNJM2794. Ground Noise Isolation Amplifier PACKAGE OUTLINE
Ground Noise Isolation Amplifier GENERAL DESCRIPTION The NJM79 is a ground noise isolation amplifier designed for car audio system. It contains dual channel differential amplifier. It is developed for
More informationNJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic olume GENERAL DESCRIPTION The NJU7 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU7 has many characteristics that are useful in audio application,
More information4in-1out Audio Selector with Isolation amplifier
in-out Audio Selector with Isolation amplifier! GENERAL DESCRIPTION! PACKAGE OUTLINE The NJM75 is In-out stereo audio Selector with ground noise isolation amplifiers. It contains dual channel differential
More informationNJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic olume GENERAL DESCRIPTION The NJU73 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU73 has many characteristics that are useful in audio application,
More information9-Input, 3-Output Stereo Audio Selector
9-Input 3-Output Stereo Audio Selector! GENERAL DESCRIPTION! PACKAGE OUTLINE NJW is a 9-input 3-output stereo audio selector. It includes three independent 9input-output stereo audio selectors and adjustable
More informationNJM2783. Preliminary. Monaural Microphone Amplifier with ALC
Preliminary NJM2783 Monaural Microphone Amplifier with ALC GENERAL DESCRIPTION The NJM2783 is a monaural microphone amplifier with auto level control function to avoid distortion due to clipping. The voltage
More informationNJM Input / 1-Output Stereo Audio Selector
-Input / -Output Stereo Audio Selector GENERAL DESCRIPTION The NJM is Input / Output Stereo Audio Selector. The NJM consists of switches and buffer operational amplifiers. Based on the internal switch
More informationNJM Input / 1-Output Stereo Audio Selector
NJM -Input / -Output Stereo Audio Selector GENERAL DESCRIPTION The NJM is -Input / -Output Stereo Audio Selector. The NJM consists of switches and buffer operational amplifiers. Based on the internal switch
More informationStereo Headphone Amplifier & Audio Line Amplifier IC. +8.5dB Amplifier 1. f=48khz ±20% +8.5dB Amplifier dB Amplifier 2.
Stereo Headphone Amplifier & Audio Line Amplifier IC!GENERAL DESCRIPTION The NJM2774 is a headphone amplifier and 2channel audio line amplifier IC. Each amplifier has a fixed Gain. Therefore, it is connectable
More informationNJM8801. High Quality Audio Dual Operational Amplifier FEATURES. EQUIVALENT CIRCUIT ( 1/2 Shown ) -1-
High Quality Audio Dual Operational Amplifier NJM88 GENERAL DESCRIPTION The NJM88 is a high quality audio dual operational Amplifier with bipolar technology, strikes a balance between MUSES technology
More informationNJW channel Electronic Volume with Input Selector
4-channel Electronic Volume with Input Selector!GENERAL DESCRIPTION The NJW1191 is 4-channel Electronic Volume with input selector. It includes main volume, balance and fader trim, 4 inputs selector, loudness
More informationNJM4585. Low Noise, Bipolar Input Dual, Audio Operational amplifier EQUIVALENT CIRCUIT PIN CONFIGURATION. FEATURES Designed for High-Quality Sound
Low Noise, Bipolar Input Dual, Audio Operational amplifier DESCRIPTION NJM48 is a low noise bipolar input dual audio operational amplifier featuring.nv/ Hz at khz. The NJM48 features Low distortion, high
More informationNJU Vrms Ground Referenced Stereo Line Amplifier PACKAGE OUTLINE
NJU rms Ground Referenced Stereo Line Amplifier GENERAL DESCRIPTION The NJU is an audio line Amplifier. It can swing rms (. peak-to-peak) signal at. operating voltage. Ground-referenced outputs eliminate
More informationNJW channel Electronic Volume with Input Selector
4-channel Electronic Volume with Input Selector GENERAL DESCRIPTION The NJW1192 is 4-channel Electronic Volume with input selector. It includes main volume, balance and fader trim, 3 stereo inputs and
More informationNJM4582 AUDIO DUAL OPERATIONAL AMPLIFIER
AUDIO DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION is the dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring noiseless,
More informationNJM5532 LOW-NOISE DUAL OPERATIONAL AMPLIFIER
LOW-NOISE DUAL OPERATIONAL AMPLIFIER NJM3 GENERAL DESCRIPTION The NJM3 is a high performance dual low noise operational amplifier. Compared to the standard dual operational amplifiers, such as the NJM,
More informationNJM4558C DUAL OPERATIONAL AMPLIFIER V + OUTPUT -INPUT +INPUT V -
NJM48C DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM48C integrated circuit is a dual high-gain operational amplifier internally compensated and constructed on a single silicon chip. Combining
More informationNJM4580 DUAL OPERATIONAL AMPLIFIER
NJM8 DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM8 is a dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring
More informationNJW Vrms Ground Referenced 6-Channel Line Amplifier PACKAGE OUTLINE
Vrms Ground Referenced -Channel Line Amplifier GENERAL DESCRIPTION The NJW is a -channel audio line amplifier for High Voltage Pre-out of Car AV system. It can swing Vrms(.V peak-to peak) singal at V opearating
More informationNJM2732. Rail-to-Rail Input/Output Dual Operational Amplifier
Rail-to-Rail Input/Output Dual Operational Amplifier NJM7 GENERAL DESCRIPTION The NJM7 is a Rail-to-Rail Input/Output dual operational amplifier featuring low power, low noise and a low voltage operation
More informationNJM2734. Rail-to-Rail Input/Output Quad Operational Amplifier
Rail-to-Rail Input/Output Quad Operational Amplifier NJM2734 GENERAL DESCRIPTION NJM2734 is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v.
More informationHigh Quality Audio, J-FET Input, Dual Operational Amplifier
MUSES High Quality Audio, J-FET Input, Dual Operational Amplifier The MUSES is a dual J-FET input high quality audio operational amplifier, which is optimized for high-end audio and professional audio
More informationNJM2761RB2. Audio Limiter
NJM76 Audio Limiter GENERAL DESCRIPTION The NJM76 is the audio limiter for speaker protection. The limit level is adjustable by external resistor. It is suitable for PC, potable audio and others. PACKAGE
More informationHigh Quality Audio, Bipolar Input, Dual Operational Amplifier
MUSES High Quality Audio, Bipolar Input, Dual Operational Amplifier The MUSES is a dual bipolar input high quality audio operational amplifier, which is optimized for high-end audio and professional audio
More informationNJM2734SCC. Rail-to-Rail Input/Output Quad Operational Amplifier PACKAGE OUTLINE
Rail-to-Rail Input/Output Quad Operational Amplifier GENERAL DESCRIPTION NJM74SCC is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v. Rail-to-Rail
More informationMUSES8832. Rail-to-Rail Output, High Quality Audio, Dual Operational Amplifier. MUSES and this logo are trademarks of New Japan Radio Co., Ltd.
MUSES Rail-to-Rail Output, High Quality Audio, Dual Operational Amplifier GENERAL DESCRIPTION The MUSES is a Rail-to-Rail output High quality audio operational amplifier, which is optimized for high-end
More informationRail-to-Rail Input/Output Quad Operational Amplifier 8. C OUTPUT 9. C -INPUT 10. C +INPUT 11. GND(V ) 12. D +INPUT 13. D INPUT 14.
Rail-to-Rail Input/Output Quad Operational Amplifier GENERAL DESCRIPTION is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v. Rail-to-Rail Input/Output
More informationCLASS D AMPLIFIER FOR DIGITAL AUDIO ! PACKAGE OUTLINE ! PIN CONFIGURATION V DD STBY TEST MUTE V DDL OUT LP V SSL OUT LN RST V SS
PRELIMINARY CLASS D AMPLIFIER FOR DIGITAL AUDIO! GENERAL DESCRIPTION The NJU8725 is an 800mW-output class D Amplifier featuring 6 th Σ modulation. It includes Digital Attenuator, Mute, and De-emphasis
More informationSIGNAL LEVEL SENSOR SYSTEM
SIGNAL LEVEL SENSOR SYSTEM GENERAL DESCRIPTION The NJU7181 is a signal level sensor system IC. It sends a High flag to the microprocessor or other equipments whenever it detects the existence of the audio
More informationHIGH-POWER & LOW-VOLTAGE AUDIO POWER AMPLIFIER
NJU789 HIGH-POWER & LOW-VOLTAGE AUDIO POWER AMPLIFIER GENERAL DESCRIPTION The NJU789 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because
More informationMUSES8920. High Quality Audio J-FET Input Dual Operational Amplifier - 1 -
MUSES9 High Quality Audio J-FET Input Dual Operational Amplifier GENERAL DESCRIPTION The MUSES9 is a high quality audio J-FET input dual operational amplifier, which is optimized for high-end audio, professional
More informationNJM2115 DUAL OPERATIONAL AMPLIFIER
NJM5 DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION NJM5 is a low operating Voltage ( ±.V min. ) and low saturation output voltage ( ±.V P-P at supply voltage ±.5V ) operational amplifier.it is applicable
More informationNJM2748/2748A. Low Offset, Low Drift single JFET Input Operational Amplifier -1-
Low Offset, Low Drift single JFET Input Operational Amplifier NJM2748/2748A GENERAL DESCRIPTION The NJM2748/2748A is a Precision dual JFET input operational amplifier which includes low input offset voltage:.7mv
More informationNJM2722. Single Ultra-High speed and Wide Band Operational Amplifier
Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM2722 is a single, ultra-high speed and wide band operational amplifier that features 1V/μs slew rate and 1ohm load
More informationNJM2344. PWM DC/DC Converter IC with Standby Function FEATURES
PWM DC/DC Converter IC with Standby Function GENERAL DESCRIPTION The NJM344 is a general purpose PWM DC/DC converter IC configurable for step-up, step-down and inverting applications. An internal.a power
More informationMonaural BTL Output Clock-less Switching Driver for Class D Amplifier
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier GENERAL DESCRIPTION PACKAGE OUTLE The NJU8789 is a monaural BTL output switching driver for class D amplifier including Separated Power
More informationMUSES8820. High Quality Audio Dual Operational Amplifier - + PACKAGE OUTLINE
MUSES High Quality Audio Dual Operational Amplifier GENERAL DESCRIPTION The MUSES is a high quality audio operational amplifier, which is optimized for high-end audio and professional audio applications.
More informationFEATURES DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PT2257 Electronic Volume Controller IC
Electronic Volume Controller IC DESCRIPTION The PT2257 is an electronic volume controller IC utilizing CMOS technology specially designed for the new generation of AV entertainment products. It has two
More informationLOW VOLTAGE AUDIO POWER AMPLIFIER
LOW VOLTAGE AUDIO POWER AMPLIFIER NJM19 GENERAL DESCRPTION The NJM19 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because of the differential
More informationNJM2737. Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier
Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM2737 is a Rail-to-Rail Input/Output single supply dual operational amplifier featuring low voltage operation,
More informationSINGLE SUPPLY QUAD OPERATIONAL AMPLIFIER
NJM SINGLE SUPPLY QUAD OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM is single-supply quad operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current,
More informationPrinceton Technology Corp.
DESCRIPTION is an electronic volume controller IC utilizing CMOS Technology specially designed for use on audio equipments. It has two () built-in channels making it ideally suitable for mono and stereo
More informationNJW1175. AUDIO PROCESSOR with BBE ViVA+
AUDIO PROCESSOR with BBE ViVA+ GENERAL DESCRIPTION The is a TV audio processor with BBE ViVA+ High Definition 3D Sound process. BBE's traditional sound clarity enhancement technology is combined with the
More informationNJW1320 WIDE BAND VIDEO SWITCH WITH I 2 C BUS
WIDE BAND VIDEO SWITCH WITH I 2 C BUS NJW1320 GENERAL DESCRIPTION The NJW1320 is a Wide Band Video Switch with I 2 C BUS.The NJW1320 includes switch of 4-input 3-output and amplifier. It is suitable for
More informationNJM12904L SINGLE SUPPLY DUAL AMPLIFIER
NJM9 SINGLE SUPPLY DUAL AMPLIFIER GENERAL DESCRIPTION The NJM9 is single-supply dual operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current, and drive
More informationINTEGRATED CIRCUITS DATA SHEET. TDA8425 Hi-fi stereo audio processor; I 2 C-bus. Product specification File under Integrated Circuits, IC02
INTEGRATED CIRCUITS DATA SHEET Hi-fi stereo audio processor; I 2 C-bus File under Integrated Circuits, IC02 October 1988 GENERAL DESCRIPTION The is a monolithic bipolar integrated stereo sound circuit
More informationWide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier
NJU777 Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier GENERAL DESCRIPTION The NJU777 are Rail-to-Rail input/output CMOS single/dual/quad operational amplifiers.
More informationDual Precision Operational Amplifier
NJM79 Dual Precision Operational Amplifier FEATURES Precision V IO =6µV max. V IO =µv max. (Ta=-ºC to +8ºC) Low Offset Drift V IO / T=.9µV/ºC max. (Ta=-ºC to +8ºC) Specified for ±V and ±V operation CMR
More informationNJM13404 SINGLE SUPPLY DUAL OPERATIONAL AMPLIFIER 1 8 A
SINGLE SUPPLY DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The is single-supply dual operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current, high
More informationLow Offset, Low Drift Dual JFET Input Operational Amplifier. NJM2749M, NJM2749AM : DMP8 NJM2749E, NJM2749AE : SOP8 JEDEC 150mil V + OUTPUT B INPUT B
Low Offset, Low Drift Dual JFET Input Operational Amplifier GENRRAL DESCRIPTION The NJM2749/2749A is a Precision dual JFET input operational amplifier which includes low input offset voltage:.8mv (typ)
More informationNJM12904 SINGLE SUPPLY DUAL AMPLIFIER -INPUT +INPUT OUTPUT GND(V-)
NJM1294 SINGLE SUPPLY DUAL AMPLIFIER GENERAL DESCRIPTION The NJM1294 is a single-supply dual operational amplifier, which can operate from 2V supply. The features are low offset voltage, low bias current.
More informationHigh Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
More informationNJM8202. Single Supply, Rail-to-Rail Output Dual Operational Amplifier
NJM8 Single Supply, Rail-to-Rail Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM8 is a Rail-to-Rail output single supply dual operational amplifier with a low noise of nv/ Hz (typ. at khz)
More informationINTEGRATED CIRCUITS DATA SHEET. TDA8424 Hi-Fi stereo audio processor; I 2 C-bus. Product specification File under Integrated Circuits, IC02
INTEGRATED CIRCUITS DATA SHEET Hi-Fi stereo audio processor; I 2 C-bus File under Integrated Circuits, IC02 September 1992 FEATURES Mode selector Spatial stereo, stereo and forced mono switch Volume and
More informationHIGH-POWER & LOW-VOLTAGE AUDIO POWER AMPLIFIER
NJU784 HIGH-POWER & LOW-VOLTAGE AUDIO POWER AMPLIFIER GENERAL DESCRIPTION The NJU784 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because
More informationNJM2720. Single Ultra-High speed and Wide Band Operational Amplifier
NJM272 Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM272 is a single, ultra-high speed and wide band operational amplifier that features 2V/μs slew rate and 1ohm
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD AUDIO PROCESSOR IC DESCRIPTION The U7313 is a 3-stereo inputs and 4-speaker outputs digital audio processor which incorporates volume, tone(bass and treble), balance(left/right)and
More informationDOUBLE BALANCED MODULATION / DEMODULATION
NJM9 DOUBLE BALANCED MODULATION / DEMODULATION! GENERAL DESCRIPTION! PACKAGE OUTLINE The NJM9 is a double balanced modulation/demodulation circuit, applied to suppressed carrier modulation, amplitude modulation,
More informationPrecision Operational Amplifier
Precision Operational Amplifier NJMOP77/NJMOP77 FEATURES Precision V IO =6μV max. V IO =μv max. (Ta= - to +8 ) PACKAGE OUTLINE Low Offset Drift V IO / T=.µV/ max. (Ta= - to +8 ) CMR db min. Low Noise V
More information6-Ch Audio Selector PT2323
DESCRIPTION is a 6-Channel Audio Selector utilizing CMOS Technology specially designed for Home Theater System. It provides a built-in 2-Channel to 6-Channel Translator, which can directly mix traditional
More information4 Stereo Inputs and 2 Channels Output Volume, Tone, Balance, Loudness and Selectable Input Gain R B. Bass Treble. Serial Bus Decoder and Latches
4 Stereo Inputs and 2 Channels Output Volume, Tone, Balance, Loudness and Selectable Input Gain FEATURES Operation range : 2.7V~5V 4 stereo inputs with selectable input gain 2 independent speaker controls
More informationNJU8790. Pushbutton Interface EVR with Class D Stereo Power Amplifier NJU
Pushbutton Interface EVR with Class D Stereo Power Amplifier NJU8790 GENERA DESCRIPTION The NJU8790 is a pushbutton interface electronic volume with class D stereo power amplifier. It includes input selector,
More informationVocal fader IC BA3837 / BA3837F / BA3838F. Multimedia ICs
Vocal fader IC The BA3837, BA3837F and BA3838F are ICs with an internal secondary active LPF for vocal cancellation functions and mixing amplifier functions with high degrees of vocal cancellation. Three
More informationBand Pass Filter for Spectrum Analyzer Display
NJM Band Pass Filter for Spectrum Analyzer Display GENERAL DESCRIPTION The NJM is a band pass filter for spectrum analyzer display. It includes -band BPF amplifier, -band detector and recording level indicator
More information4-Channel Input Audio Processor
DESCRIPTION is a four-channel input digital audio processor utilizing CMOS Technology. Volume, Bass, Treble and Balance are incorporated into a single chip. Loudness Function and Selectable Input Gain
More informationHIGH-POWER & LOW-VOLTAGE AUDIO POWER AMPLIFIER
NJU784 HIGH-POWER & LOW-VOLTAGE AUDIO POWER AMPLIFIER GENERAL DESCRIPTION The NJU784 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because
More informationHIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM2742 is a high speed single supply operational amplifier.the low V OL enables to treat small output signal on a single supply.
More informationVIDEO SWITCH FOR DVD RECORDER
VIDEO SWITCH FOR DVD RECORDER GENERAL DESCRIPTION The NJW1340 is a video switch for DVD recorders corresponding to the composite signal and Y/C signal. It contains synchronous separation circuit and synchronous
More informationNJM2887 ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR
ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM887 is an adjustable low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection
More informationSINGLE SUPPLY WIDE BAND
SINGLE SUPPLY WIDE BAND VIDEO AMPLIFIER GENERAL DESCRIPTION The NJM80 is a wide band video amplifier, operated on a single supply voltage. It is suitable for Y, Pb, and Pr signal because frequency range
More informationNJM2718. Single-Supply High-Operating voltage Dual Operational Amplifier PACKAGE OUTLINE
Single-Supply High-Operating voltage Dual Operational Amplifier GENERAL DESCRIPTION The NJM2718 is a single-supply high-operating voltage dual operational amplifier. It is suitable for high supply voltage
More informationSERIAL I/O REAL TIME CLOCK
SERIAL REAL TIME CLOCK GENERAL DESCRIPTION The NJU6355 series is a serial real time clock suitable for 4 bits microprocessor. It contains quartz crystal oscillator, counter, shift register, voltage regulator,
More informationNJM2871/A, NJM2872/A LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM2871/A, NJM2872/A are low dropout voltage regulators designed for cellular phone application. Advanced Bipolar technology achieves low noise, high
More informationHigh Quality Audio, J-FET Input, Dual Operational Amplifier
MUSES High Quality Audio, J-FET Input, Dual Operational Amplifier The MUSES is a dual J-FET input high quality audio operational amplifier, which is optimized for high-end audio and professional audio
More informationPAM8402. General Description. Key Features. Applications. Typical Application Vdd. 2 W Class-D Stereo Audio Amplifier with Enable
Key Features 2W@0 THD per Channel Output into a 4Ω oad at V Support Speakers or Earphones(4Ω to 32 Ω) ow THD+N Superior ow Noise without Input Efficiency up to 8 Short Circuit Protection Space Saving Package:
More informationNJM8512/NJM8513. Precision, JFET Input Operational Amplifier
Precision, JFET Input Operational Amplifier NJM8512/NJM8513 FEATURES Low Input Offset Voltage V IO =4μV max. V IO =7μV max. (Ta= -4 C to +125 C) Low Input Offset Voltage Drift ΔV IO /ΔT=5μV/ C max. (Ta=
More informationLow Noise, High-Speed Dual Operational Amplifier. Vni = 3nV/ Hz typ. (at f=10khz) ft = 90MHz typ. (at V + /V - = ±2.5V)
Low Noise, High-Speed Dual Operational Amplifier NJM2719 GENERAL DESCRIPTION The NJM2719 is a high speed voltage feedback dual operational amplifier specifically optimized for low voltage noise. Combining
More informationNJM2871/A, NJM2872/A LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM2871/A, NJM2872/A are low dropout voltage regulators designed for cellular phone application. Advanced Bipolar technology achieves low noise, high
More informationNJM2904C / NJM2904CA SINGLE-SUPPLY DUAL OPERATIONAL AMPLIFIER
NJM94C / NJM94CA SINGLE-SUPPLY DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM94C / NJM94CA consists of two independent, high gain, internally frequency compensated operation amplifiers, which were
More informationDesignated client product
Designated client product This product will be discontinued its production in the near term. And it is provided for customers currently in use only, with a time limit. It can not be available for your
More informationPrecision Operational Amplifier
Precision Operational Amplifier NJM79 FEATURES Precision V IO =6µV max. V IO =µv max. (Ta=-ºC to +8ºC) Low Offset Drift ΔV IO /ΔT=.9µV/ºC max. (Ta=- to +8ºC) Specified for ±V and ±V operation CMR db min.
More informationLOW VOLTAGE VIDEO AMPLIFIER WITH LPF
LOW VOLTAGE VIDEO AMPLIFIER WITH LPF GENERAL DESCRIPTION The NJM2561A is a low voltage single video amplifier with low pass filter. The NJM2561A features low power and small package. It is suitable for
More informationNJU3715A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE The NJU3715A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V.
More informationNJU7076/NJU7077/NJU7078
NJU776/NJU777/NJU778 Precision, Low Noise, Rail-to-Rail Output, CMOS Operational Amplifier GENERAL DESCRIPTION The NJU776/NJU777/NJU778 is a high precision Rail-to-Rail output Single/Dual/Quad CMOS operational
More informationDIO2115E 2-Vrms Audio Driver with Adjustable Gain
Rev.0 Features Voltage Output at 32Ω Load 20mW % THD+N with 3.3V supply voltage No Pop/Clicks Noise when Power ON/OFF No Need for Output DC-Blocking Capacitors Optimized Frequency Response between 20Hz
More informationULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM711 is an ultra high speed single operational amplifier. It can swings 6V/µs high slew rate and 1GHz gain band width product(1mhz
More information2-Channel Audio Processor IC
DESCRIPTION is a two-channel digital audio processor utilizing CMOS Technology. Volume, Bass, Treble and Balance Controls are incorporated into a single chip. Loudness Function is also provided to build
More informationDual 2W Power Amplifier, I 2 C interface Stereo Input with Volume Control
Dual W Power Amplifier, I C interface Stereo Input with Volume Control FEATURES Operation range:.4v ~ 6.5V Volume control range Gain: 0 to db, 3dB/step Attenuation: 0 to -77.5dB,.5dB/step Output mode :
More informationDIO Vrms Audio Driver with Adjustable Gain
Rev.2 Features Voltage Output at 600Ω Load 2Vrms with 3.3V supply voltage 3Vrms with 5.0V supply voltage Ultra Low noise and THD SNR>2dB Typical Vn00dB No Pop/Clicks Noise when Power ON/OFF
More informationYAC523 EVR2. Electric Variable Resistance 2
EVR2 Electric Variable Resistance 2 Outline YAC523 (EVR2) is a 7ch high grade digital volume LSI for high-end audio systems. Owing to its built-in high-quality sound operational amplifier, output with
More informationAN7561Z. BTL output power IC for car audio. ICs for Audio Common Use. Overview. Features. Applications
BTL output power IC for car audio Overview The is an audio power IC developed as a car audio output (35 W 4-ch). CR to stop oscillation is built in between the output pin and GND so that a space saving
More informationNJU7026/NJU7027/NJU7028
NJU76/NJU77/NJU78 μa/ch, Rail-to-Rail Output CMOS Operational Amplifier FEATURES (V + =5V, V - =V, Ta=5 C, typ.) Supply Current (All Amplifiers) NJU76 µa NJU77 6µA NJU78 8µA Supply Voltage.8V to 5.5V Gain
More informationNJU7272. Low Dropout Voltage Regulator with Reset
Low Dropout Voltage Regulator with Reset GENERAL DISCRIPTION The NJU7272 is a low drop out voltage regulator with input-monitor reset function with delay. Advanced CMOS technology achieves ultra low current
More informationHIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER V + B OUTPUT B -INPUT B +INPUT SOP8 SSOP8 MSOP8(VSP8) SOP14 SSOP14
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER FEATURES High Slew Rate 10V/µs High Bandwidth 3MHz High Unity Gain Frequency 3.6MHz Input Offset Voltage 5.5mV max. Single Supply 3V to 36V Operating Temperature
More informationLow Cost 3 Stereo Inputs and 4-Channel Outputs Volume, Tone, Balance, Fader, Loudness, and Selectable Input Gain APPLICATIONS R B.
Low Cost 3 Stereo Inputs and 4-Channel Outputs Volume, Tone, Balance, Fader, Loudness, and Selectable Input Gain FEATURES Operation range : 2.7V~6.5V 3 stereo inputs with selectable input gain 4 independent
More informationNJM324C. Low power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More information