FIBER OPTIC DATA LINK DATA SHEET
|
|
- Vivian Wiggins
- 6 years ago
- Views:
Transcription
1 FIBER OPTIC DATA LINK DATA SHEET MODEL NO. : FCR684204T DATE : 2016/07/08 VERSION : 1.0 DEVICE NO. : OTJ 4 (OPTICAL TRANSMITTER JACK) CUSTOMER DESIGNER CHECKER APPROVER
2 Features High speed signal transmission (16Mbps, NRZ signal ) Input TTL compatible +3~+5V power source Automatically detects the presence of a mini-plug in the jack and distinguishes an optical mini-plug from an electrical mini-plug Descriptions The light transmitting unit is a standard-package product with connector and opto-electric component packaged with LED and drive IC. The function of unit changes the electric signal into light signal and be transmitted by plastic fiber. The unit is operated at single+3v~ +5V and the input signal is TTL compatible. FCR684204T has a maximum operating speed of 16 Mbps. The light signal is coupled into plastic fiber by connector. The unit has high performance at low dissipation current, steady light output and efficient light coupling. Applications MD player Portable player Device Selection Guide IC Material Chip LED λp(nm) Operating Voltage (Vcc) Dissipation Current(mA) Fiber Coupling Light Output (dbm) Typ. Min. Typ. Max. Si ~
3 Package Dimensions Notes: 1.All dimensions are in millimeters. 2.General Tolerance:±0.2mm 3. Pin 1 ~ 5 golden plating. Pin Function 1 ~ 5 : jack terminal (1,5 : detector ; 4: GND ; 2 : left channel ; 3 : right channel ) 6 ~ 9 : device terminal (6 : GND ; 7 : Vcc ; 8 : Vin ; 9 : internal connection)
4 Jack Terminal Configuration Optical circular plug ( satisfys EIAJ RC-5720B ) 3-pole small-sized concentric plug ( satisfy JIS C 6560 )
5 Optical Mini-jack Connection Type of plug Output of terminal Analog electricity L L Output of terminal 5 1 2,3 Signal data input/output Digital optics L H Signal data output No plug H H - Absolute Maximum Ratings( Ta = 25 ) Parameter Symbol Rating Unit Supply Voltage Vcc -0.5 to 7 V DC Input Voltage Vin -0.5 to Vcc+0.5 V Power Dissipation P 120 mw Storage Temperature Tstg -30 to 80 Operating Temperature Topr -20 to 70 Soldering Temperature Tsol 260* *Soldering time 5 s / 2times. *Don't touch flux soldering and white Gas
6 Electro-Optical Characteristics Parameter Symbol Conditions MIN. TYP. MAX. Unit Operating Voltage Vcc V Peak Emission Wavelength λp nm Transmission Speed NRZ signal DC - 16 Mbps Transmission Distance Using APF m Pulse Width Distortion tw 16Mbps NRZ Signal ns Fiber Coupling Light Output Pf * dbm Dissipation Current Icc * ma High Level Input Voltage VIH v Low Level Input Voltage VIL v Rise Time t r * ns Fall Time t f * ns Low High propagation delay time tplh * ns High time Low propagation delay tphl * ns Jitter tj * ns Mechanical Electro-Optical Characteristics (Jack) Parameter Symbol Conditions MIN. TYP. MAX. Unit Insertion and withdrawal force Fp *a N Contact resistance Rcon *b mω Isolation resistance Riso D.C.500V, 1min MΩ *a Using JIS C6560 standard plug (φ3.5) for test. *b It measures at 100 ma or less 1000 Hz at the condition of inserting JIS C6560 plug.
7 FCR684204T light transmitting unit satisfies EIAJ CP-1301A digital audio interface standard. Reliability Test Items No. Item Test Condition Test Hour/Cycle Samples Number (n) Failure (c) 1 Soldering Heat 260 ±5 5 sec./2times 22 n=22, c=0 2 High temp. & Hum. storage Ta=40, 90%RH n=22, c=0 3 High temp.storage Ta= n=22, c=0 4 Low Temp.storage Ta= n=22, c=0 5 Temp. cycling High Temp. 6 Operation life -30 ~ 80 (30min) (5min) (30min) n=22, c=0 Ta=60, Vcc=5V ON n=22, c=0 7 Repeated operation 500 times 8 9 Terminal Strength(tension) Terminal Strength(bending) 10 Mechanical Shock 11 Vibration Weight: 500 g 30 sec./each terminal Weight: 500 g 2 times/each terminal Acceleration: 1000m/s2 Pulse width: 6 ms 3 times/ X,Y,Z direction Frequency range: 10~55 Hz /sweep 1 min Overallamplitude:1.5 mm 2H./X,Y,Z direction Coupling force < 3.5kg 0.4kg<Detachingforce<3.5kg Icc (dissipation current): CURRENT ATTENUATE DIFFERENCE < 20% Pf (fiber coupling light output): BRIGHTNESS ATTENUATE DIFFERENCE < 20% TPLH (propagation L H delay time): DELAY TIME DIFFERENCE < 20% TPHL (propagation H L delay time): DELAY TIME DIFFERENCE < 20% Tr (rise time): TIME DIFFERENCE < 20% Tf (fall time): TIME DIFFERENCE < 20% 22 n=22, c=0 22 n=22, c=0 22 n=22, c=0 22 n=22, c=0 22 n=22, c=0
8 Measuring Method *1 Measuring method of optical output coupling fiber * 2 Input voltage/power dissipation measuring method *3 Pulse response and jitter measuring method D
9 PCB Layout For Electrical Circuit Notes: 1. unit:mm 2. Unspecified tolerance: ±0.3mm 3. Substrate Thickness:1.6mm Precautions for Using Method 1. Connect a by-pass capacitor (0.1uF) close to FCR684204T within 7 mm of the unit lead frame. 2. Take proper electrostatic-discharge (ESD) precautions while handling these devices. These devices are sensitive to ESD. 3. IR-reflow Maximum ratings IR-reflow time Peak Temp. Over 200 time 400 sec sec
10 Material Description ITEM NAME MATERIAL FINISH NOTE 1 Jack Terminal PBS Au 2 Jack Terminal PBS Au 3 Jack Terminal PBS Au 4 Jack Terminal Be-Cu Au 5 Jack Terminal PBS Au 6 GND PBS Tin 7 Vcc PBS Tin 8 Vin PBS Tin 9 Connection PBS Tin 10 Jack Body PA-9T UL94V-0 11 Cover PA-9T UL94V-0
HUAI YANG CO.,LTD. Technical Data Sheet- Light Transmitting Unit DATA LINK : DLT11M1
HUAI YANG CO.,LTD. Technical Data Sheet- Light Transmitting Unit Features High speed signal transmission ( 16 Mbps, NRZ signal ) Input TTL compatible +3~+5V power source Descriptions The light transmitting
More informationFIBER OPTIC DATA LINK DATA SHEET
FIBER OPTIC DATA LINK DATA SHEET MODEL NO : FCR684208R DATE : 2016-09-02 VERSION : 1.1 DEVICE NO. : ORJ 8 (OPTICAL RECEIVER JACK) CUSTOMER DESIGNER CHECKER APPROVER CLIFF ISS. AMEND DATE 1 ISSUED 20/09/16
More informationTechnical Data Sheet- Light Receiving Unit DATA LINK : DLR1111
Features High PD sensitivity for red light High speed up to 16 Mbps Low power consumption and current dissipation +3~+5V power source Descriptions The light receiving unit is a standard-package product
More informationPhoto-link Light Transmitter Unit PLT133/T8
Features High speed signal transmission 16Mbps NRZ Signal TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Description The opto-electrical
More informationPhotolink- Fiber Optic Receiver EAPLTAA2
Features High speed signal transmission(16mbps NRZ Signal) TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Description The opto-electrical
More informationPhoto-link Light Transmitter Unit PLT133/T10W
Features High speed signal transmission 16Mbps NRZ Signal TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Description The opto-electrical
More informationTechnical Data Sheet Photo-link Light Transmitter Unit Mob: QQ
Technical Data Sheet Photo-link Light Transmitter Unit Mob:18903054065 QQ2462655096 Features High speed signal transmission 25Mbps NRZ Signal TTL interface compatible +3~+5V single power source The product
More informationPhoto-link Light Transmitter Unit PLT133/T10W
Features High speed signal transmission(16mbps NRZ Signal) TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Description The opto-electrical
More informationPhoto-link Light Transmitter Unit PLT133 SERIES
Features High speed signal transmission 16Mbps NRZ Signal TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Description The opto-electrical
More informationPhoto-link Light Transmitter Unit PLT232/L5 SERIES
Features High speed signal transmission 25Mbps NRZ Signal TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Description The opto-electrical
More informationPhoto-link Light Transmitter Unit PLT133/T8
Features High speed signal transmission(16mbps NRZ Signal) TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Compliance with EU REACH Compilance
More informationLED
Features. Electric and optical signal compatible design (Three kinds of terminals are integrated into a single unit.). Compact design with small jack compatible mini-plug 3. OPIC type (Direct interface
More informationPhoto-link Light Transmitter Unit PLT232/L5 SERIES
Features High speed signal transmission(25mbps NRZ Signal) TTL interface compatible +3~+5V single power source The product itself will remain within RoHS compliant version. Compliance with EU REACH Compilance
More informationPhotolink- Fiber Optic Receiver PLR135/T10
Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain
More informationPhotolink- Fiber Optic Receiver PLR137 SERIES
Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain
More informationPhotolink- Fiber Optic Receiver PLR135
Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain
More informationPhotolink- Fiber Optic Receiver PLR253 Series
Features High speed signal transmission 25Mbps NRZ Signal High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved
More informationPhotolink- Fiber Optic Receiver PLR135/T7
Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain
More informationPhotolink- Fiber Optic Receiver PLR135/T
Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain
More informationGP1F31T/R, GP1F32T/R, GP1F33TT/RR/RT, GP1C331/331A/332/333/334/335
GPFT/R, GPFT/R, GPFTT/RR/RT, GPC/A//// GPFT/R, GPFT/R, GPFTT/RR/RT, GPC/A//// Features. Low jitter ( : TYP. ). High speed tramission (8Mbps, NRZ ). Directly connectable to modulation /demoduration for
More informationGP1FA550RZ. Amp. Amp.
GPFA550TZ/ GPFA550TZ/ Features. Uni-diretional signal tramission for plastic optical fiber cables. The optical receiver can be directly connectable the TTL, due to the use of OPIC Applicatio. DVD players.
More informationTechnical Data Sheet Infrared Remote-control Receiver Module
Technical Data Sheet Infrared Remote-control Receiver Module Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies.
More informationLuckylight. Infrared Remote-control Receiver Module. Technical Data Sheet. Part No.: M5038
Infrared Remote-control Receiver Module Technical Data Sheet Part No.: M5038 Spec No.: M5038 Rev No.: V.3 Date: Jul./10/2007 Page: 1 OF 8 Features: Photo detector and preamplifier in one package High photo
More informationEVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: IRM-8601-M ECN: Page: 1/8 PACKAGE DIMENSIONS: OFFICE: NO 25,Lane 76,Chung Yang Rd, Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C. TEL : 886-2-2267-2000,2266-9936 ( 22 Lines ) FAX : 886-2-2267-6189
More informationEVERLIGHT ELECTRONICS CO., LTD
Technical Data Sheet High Performance with Reflector LEDs Features: White package. Dual-chip, wide-angle, low-profile LEDs. Excellent chip to chip consistency Super Intensity High performance Pb-free The
More informationIRM-H6XX/TR2 Series. Infrared Remote Control Receiver Module. Features. Descriptions. Applications. Application Circuit
Features Standard protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features High shielding against electric field disturbance. Circular lens to improve the receive characteristic. Line-up for various center
More informationInfrared Remote-control Receiver Module
DEVICE NUMBER : DMO-860-014 REV : 1.1 ECN : PAGE : 1/8 Infrared Remote-control Receiver Module Features : High protection ability to EMI and metal case can be customized. Mold type and metal case type
More informationSENSOR SWITCH. Item.# RBS3109 Series Description TILT SWITCH Version V97.0 Page 1 of 10 Date Sep. 30, 2008
ONCQUE CORPORATION SENSOR SWITCH Item# RBS3109 Series Description TILT SWITCH Version V970 Page 1 of 10 Date Sep 30, 2008 APPLICATIONS 1 Tilt Detecting within a 360 radius: LCD Monitor Rotation Home Appliance
More informationInfrared Receiver Control Receiver Module IRM-H600JW/TR2
1 Block Diagram 2 4 Pin Configuration Features High protection ability against EMI Circular lens for improved reception characteristics Available for Carrier Frequencies between 20KHz to 60KHz TTL and
More information125 Mbps, 650 nm LED. Dimensions
DESCRIPTION The is a 125 Mbps LED designed to meet data transmission requirements in factory or office automation. The 650 nm wavelength provides operation in the low attenuation area of POF (Plastic Optical
More informationIRM-8607K-2. Infrared Remote Control Receiver Module. Features. Description. Applications. Block Diagram. Application Circuit
Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies.
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-Control Receiver Module Features : High protection ability to EMI and metal case can be customized. Mold type and metal case type to meet the design of front panel.
More informationIRM X. Infrared Remote Control Receiver Module. Release Date: :04:18.0 Expired Period: Forever. Features. Description.
Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote control Receiver Module Own Inner Shield Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center
More informationTechnical Data Sheet Infrared Remote-control Receiver Module
Technical Data Sheet Infrared Remote-control Receiver Module Features : Photo detector and preamplifier in one package Internal filter for PCM frequency Improved shielding against electrical field disturbance
More informationEVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: IRM-8420/N ECN: Page: 1/9 PACKAGE DIMENSIONS: OFFICE: NO 25,Lane 76,Chung Yang Rd, Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C. TEL : 886-2-2267-2000,2266-9936 ( 22 Lines ) FAX : 886-2-2267-6189
More informationKPC410 Series 5PIN HIGH-SPEED OUTPUT PHOTOCOUPLER
Description Schematic The KPC41 series consist of an LED optically coupled to an OPIC chip. It is a high-speed digital output type photocoupler designed specifically for low circuit current. And it is
More informationGP1FAV51RK0F. Fiber Optic Receiver Square connector With mounting hole With shutter GP1FAV51RK0F
GP1FAV51RK0F Fiber Optic Receiver Square connector With mounting hole With shutter Description GP1FAV51RK0F employs an OPIC device that integrates a photodiode and signal processing circuit onto a single
More informationCLIFF. Optical Jacks.
CLIFF Optical Jacks The CLIFF range of Optical Transmitter and Receiver jacks feature seven different models that conform to the EIAJ standard CP1201 for igital Audio Interfaces including FibreOptical
More informationTechnical Data Sheet Opto Interrupter
Technical Data Sheet Opto Interrupter Features Fast response time High analytic Peak wavelength λp=94nm High sensitivity Pb free This product itself will remain within RoHS compliant version. DS-31MM Descriptions
More informationSiGe:C LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS
DESCRIPTION BIPOLAR ANALOG INTEGRATED CIRCUIT PC8231TK SiGe:C LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS The PC8231TK is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed
More informationSMT690D/830. High Performance Bi-color TOP LED
SMTD/ SMTD/ High Performance Bi-color TOP LED Outer Dimension (Unit:mm) - Chip Material: AlGaInP/AlGaAs - Chip Dimension: x um / x um - Number of Chips: pcs - Peak Wavelength: nm typ.
More informationDISCONTINUED PC3240TB BIPOLAR ANALOG INTEGRATED CIRCUIT 3.3 V, SILICON MMIC WIDE BAND AMPLIFIER DESCRIPTION FEATURES APPLICATIONS ORDERING INFORMATION
DESCRIPTION BIPOLAR ANALOG INTEGRATED CIRCUIT PC3240TB 3.3 V, SILICON MMIC WIDE BAND AMPLIFIER The PC3240TB is a silicon monolithic integrated circuit designed as IF amplifier for DBS LNB. This device
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies.
More informationLIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. SINGLE DIGIT LED DISPLAY (0.3 Inch) DATA SHEET LSD3021-XX REV. : A
SINGLE DIGIT LED DISPLAY (0.3 Inch) DATA SHEET DOC. NO : QW0905- REV. : A DATE : 23 - Dec. - 2005 Page 1/7 Package Dimensions PIN NO.1 A LIGITEK F G B E D C R.DP 7.62 (0.3") 19.0 (0.75") 2.54*6= 15.24(0.6")
More informationSMT660N/805/ High Performance Multi-Color TOP LED
TOP LED SMTN//- SMTN//- High Performance Multi-Color TOP LED Outer Dimension (Unit:mm) - Chip Material: AlGaInP/AlGaAs/AlGaAs - Chip Dimension: um x um - Number of Chips: pcs - Peak Wavelength:
More informationInfrared Receiver Control Receiver Module IRM-V5XXT/TR1 Series
Infrared Receiver Control Receiver Module Block Diagram Features High shielding against electric field disturbance. Circular lens to improve the receive characteristic. Line-up for various center carrier
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features High protection ability against EMI. Oval lens to improve the receive angles. Line-up for various center carrier frequencies. Low voltage
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Luminosity Full Color LED Features Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle.
More informationInfrared Receiver Control Receiver Module IRM-36xxT Series
Infrared Receiver Control Receiver Module IRM-36xxT Series Block Diagram Vs OUT Pin Configuration IN Input CGA & filter Demodulator µc 1 2 3 1. OUT 2. GND 3. V CC Carrier frequency f0 Oscillator AGC/ATC
More informationTOYO LED ELECTRONICS LIMITED Room 1610, Hong Kong Plaza, 188 Connaught Road West, Hong Kong. Tel : (852)
PACKAGE DIMENSION INTERNAL CIRCUIT DIAGRAM NOTES: 1. All dimensions are in millimeter(inch); 2. Tolerance is ±0.25mm(0.01 ) especially other specified; 3. Pin length, housing color, marking no & circuit
More informationHL-PST-1608U70GC 2.60 [0.10] 0.60 [0.02] 1.10 [0.04] Description. Recommended Soldering Pattern. Package Dimensions. Applications 0.80 [0.
0.18 [0.01] 0.68 [0.03] 1.10 [0.04] 0.80 [0.03] Features Extremely wide viewing angle Suitable for all SMT assembly and solder process Available on tape and reel Moisture sensitivity level: Level 4 Package:4000pcs/reel
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features : Photo detector and preamplifier in one package Internal filter for PCM frequency Improved shielding against electrical field disturbance
More informationPC929. Shortcircuit Protector Circuit Built-in Photocoupler Suitable for Inverter-Driving MOS-FET/IGBT PC929. Outline Dimensions.
TÜ (DE 04 ) approved type is also available as an option. Shortcircuit Protector Circuit Built-in Photocoupler Suitable for Inverter-Driving MOS-FET/IGBT Features. Built-in IGBT shortcircuit protector
More informationInfrared Receiver Module EAIRMAA0
Block Diagram Pin Configuration 1. OUT 2. GND 3. V CC 1 2 3 Features High protection ability against EMI Circular lens for improved reception characteristics Available for Carrier Frequencies between 30KHz
More informationKPC354NT Series 4PIN MINI-FLAT PHOTOTRANSISTOR PHOTOCOUPLER
Description The KPC354 series of devices each consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin Mini-Flat
More informationTechnical Data Sheet Opto Interrupter ITR
Technical Data Sheet Opto Interrupter ITR Features Fast response time High sensitivity Cut-Off visible wavelength Thin Compact Pb free Descriptions is a light reflection switch which includes a GaAs IR-LED
More informationOpto-Device & Custom LED 5 MOLD LED LAMP L1050G-02. Infrared LED Lamp
LG- Opto-Device & Custom LED MOLD LED LAMP LG- Infrared LED Lamp LGS- is a GaAs LED mounted on a lead frame with a clear epoxy lens. On forward bias it emits a spectral band of radiation, which peaks at
More informationUVLED375E-SMD. 375 nm SMD UVLED TECHNICAL DATA. Features. Specifications (25 C) Device Materials
UVLED375E-SMD TECHNICAL DATA 375 nm SMD UVLED Features Zener diode is built in the protective circuit against static electricity Low Voltage DC Operated High Power Intensity Complies with RoHS Directive
More informationLIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD. Lead-Free Parts LG-150HRF-CT DATA SHEET REV. : B. DATE : 21 - Jun
LED SMD Pb Lead-Free Parts LG-150HRF-CT DATA SHEET DOC. NO : QW0905-LG-150HRF-CT REV. : B DATE : 21 - Jun - 2005 Page 1/10 Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Compatible
More informationFT50MHNR FT50MHIR FT50MVNR FT50MVIR 650 nm DC 50 MBd Fully Integrated RedLink Fiber Optic Transmitter Data Sheet
FT50MHNR FT50MHIR FT50MVNR FT50MVIR 650 nm DC 50 MBd Fully Integrated RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION The Firecomms DC 50 MBd RedLink transmitter consists of a highly reliable Resonant
More informationEVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Side View LEDs (Height 0.8mm) Features Side view LED. Lead frame package with individual 2 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself
More informationSMT850DS-S1 High Performance TOP IR LED
SMT8DS-S High Performance TOP IR LED PRELIMINARY - Chip Material: AlGaAs - Chip Dimension: um x um - Number of Chips: pcs - Peak Wavelength: 8nm typ. - Lead Frame Die: Silver Plated -
More informationEVERLIGHT ELECTRONICS CO., LTD
Technical Data Sheet High Performance with Reflector LEDs Features: White package. Dual-chip, wide-angle, low-profile LEDs. Excellent chip to chip consistency Super Intensity High performance Pb-free The
More information2- φ2.0 ± MIN. (7.25) (1.27) (2.54) *2 For 5 seconds. ( Unless otherwise specified, Ta = 0 to + 70 C) *3*4IF= 30mA, V CC= 5V
Photointerrupter with Encoder Function Features 1. -phase ( A, B ) digital output. Possible to use plastic disk 3. High sensing accuracy ( slit pitch : mm ) 4. TTL compatible output 5. Compact and light
More informationTechnical Data Sheet Opto Interrupter
Technical Data Sheet Opto Interrupter Features Fast response time High sensitivity Cut-Off visible wavelength Thin Compact Pb free This product itself will remain within RoHS compliant version. Descriptions
More informationLITE-ON TECHNOLOGY CORPORATION
Features * Meet ROHS, Green Product. * Dual color chip LED. * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow
More information0805 PACKAGE CHIP LED TSP2-XF2012A3
0805 Package Chip LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type RoHS compliance
More informationSFH551/1-1 and SFH551/1-1V Receiver with Digital Output Stage for Polymer Optical Fiber Applications. Data Sheet. Description.
and V Receiver with Digital Output Stage for Polymer Optical Fiber Applicatio Data Sheet Description The receiver is a traimpedance amplifier with an integrated photodiode and TTL open-collector output
More informationL6990/750/800/850-40B59 Multi-Wavelength LED
Φ Stem type LED Lamp L///-B L///-B Multi-Wavelength LED This product consists of AlGaAs(,,,nm) LED mounted on TO- pins type stem with a glass lens. Chips are connected as anode common. .
More informationFull Color Chip LED with Right Angle Lens TFPR-QTB1FA2714. Full Color Chip LED With Right Angle Lens. Features. Applications.
Full Color Chip LED with Right Angle Lens Full Color Chip LED With Right Angle Lens Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared
More informationSMT970D High Performance Infrared TOP LED
SMT9D High Performance Infrared TOP LED SMT9D consists of a AlGaAs LED mounted on the lead frame as TOP LED package and is mw typical of power. It emits a spectral band of radiation at 9nm. Outer Dimension
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features Photo detector and preamplifier in one package Internal filter for PCM frequency Improved inner shielding against electrical field
More informationFT01MHNG FT01MVNG. 530 nm DC-1 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT01MHNG FT01MVNG 530 nm DC-1 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC to 1 MBd green 530 nm transmitter is designed for maximum distance at low speed communication in
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features Circular lens to improve the receive characteristic. Operation voltage:2.7~5.5v and low power consumption. High immunity against ambient
More informationFT50MxxR 650 nm DC-50 MBd Fully Integrated RedLink Fiber Optic Transmitter Datasheet
FT50MxxR 650 nm DC-50 MBd Fully Integrated RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink transmitter consists of a highly reliable Resonant Cavity Light Emitting
More informationDISCONTINUED. California Eastern Laboratories PS9817-1,-2. NEC's HIGH CMR, 10Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
NEC's HIGH CMR, 1Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER DESCRIPTION NEC's and PS9817-2 are active-low type high-speed photocouplers that use a GaAlAs light-emitting diode
More informationDC 50 FEATURES APPLICATIONS. Emitting a visible (POF). range of. MBd. with +/ 10 % RCLED in. Ultra low. width distortion. Table 1.
FE50MKIR FE50MKNR DC 50 Fiber Optic OptoLock Transceiver Preliminary Data Sheet DESCRIPTION The Firecomms DC 50 MBd OptoLock transceiver consists of a highly reliable Resonant Cavity Light Emitting Diode
More informationTechnical Data Sheet. Top View LEDs with Lens 67-21B/BHC-XS1T2M/BT
Features PLCC-2 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Suitable for
More information3mm Infrared LED. Features :
Features : High radiant intensity Peak wavelength p=940nm View angle 35 High reliability 2.54mm Lead spacing Description : EVERCOLORS Infrared Emitting Diode () is a high intensity diode, molded in a water
More informationDATA SHEET L8UG9033/TR1 發行 立碁電子 DCC SURFACE MOUNT TAPE AND REEL. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DOC. NO : QW0905-L8UG9033/TR1
SURFACE MOUNT TAPE AND REEL Pb Lead-Free Parts L8UG933/TR1 DATA SHEET DOC. NO : QW95-L8UG933/TR1 REV. : A DATE : 25 - Mar. - 21 發行 立碁電子 DCC PART NO. L8UG933/TR1 Page 1/7 Package Dimensions Cathode 4.6±.5
More informationSMT880 High Performance Infrared TOP IR LED
TOP IR LED High Performance Infrared TOP IR LED consists of an AlGaAs LED mounted on the lead frame as TOP LED package and is mw typical of output power. It emits a spectral band of radiation at 88nm.
More informationNEC's HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
NEC's HIGH CMR, 1 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER PS9814-1,-2 DESCRIPTION NEC's PS9814-1 and PS9814-2 are active-low type highspeed optocouplers that use a GaAlAs
More information0.8mm Height Flat Top Infrared LED
ECN : PAGE : 1/8 Features : High radiant intensity Peak wavelength p=850nm View angle 145 High reliability Small double-end package Description : is an infrared emitting diode in a miniature plastic SMD
More informationLITE-ON TECHNOLOGY CORPORATION
Features * Meet ROHS, Green Product. * Package In 8mm Tape On 7" Diameter Reels. * EIA STD package. * I.C. compatible. * Compatible With Automatic Placement Equipment. * Compatible With Infrared And Vapor
More informationTechnical Data Sheet 3mm Infrared LED, T-1
Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength λp=94nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain within
More informationInfrared Remote-Control Receiver Module. Technical Data Sheet. Part No.: LL-M6038
Infrared Remote-Control Receiver Module Technical Data Sheet Part No.: LL-M638 Spec No.: M638 Rev No.: V.2 Date: Mar./2/26 Page: 1 OF 11 Features: Photo detector and preamplifier in one package. Photodiode
More informationHMC677G32 INTERFACE - SMT. 6-Bit SERIAL/PARALLEL SWITCH DRIVER/CONTROLLER. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Microwave and Millimeterwave Control Circuits Test and Measurement Equipment Complex Multi-Function Assemblies Military and Space Subsystems Transmit/Receive Module
More informationInfrared Remote Control Receiver Module IRM-2638T
Block Diagram 1 2 3 Pin Configuration 1. OUT 2. GND 3. V CC IN Carrier frequency f0 Input Oscillator CGA & filter Vs Demodulator AGC/ATC & digital control OUT µc Features Modulated IR signal min 10 pulses
More informationOpto-Device & Custom LED 5 MOLD LED LAMP L760-01AU
L-AU Opto-Device & Custom LED MOLD LED LAMP L-AU Infrared LED Lamp L-AU is an AlGaAs LED mounted on a lead frame with a clear epoxy lens. On forward bias it emits a spectral band of radiation, which peaks
More informationEVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features High shielding against electric field disturbance. Circular lens to improve the receive characteristic. Line-up for various center
More informationHFD Mbit Direct Coupled Receiver
FEATURES Converts fiber optic input signals to TTL digital outputs Typical sensitivity 2 µw (-27 dbm) Single 5 V supply requirement Direct coupled receiver circuit Open collector output Microlens optics
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote-control Receiver Module Features : Photo detector and preamplifier in one package Internal filter for PCM frequency Improved shielding against electrical field disturbance
More informationEE-SX1330. Photomicrosensor (Transmissive) Ultra-Compact Slot / SMD Type (Slot width: 3 mm) Ordering Information
Photomicrosensor (Transmissive) EE-SX33 Ultra-Compact Slot / SMD Type (Slot width: 3 mm) PCB surface mounting type. High resolution with a.3-mm-wide aperture. Be sure to read Safety Precautions on page
More informationHIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER
PHOTOCOUPLER PS9115 HIGH CMR, 1 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS9115 is an optically coupled high-speed, totem pole output isolator containing a GaAlAs
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Features Side view LED. Lead frame package with individual 2 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions
More informationOpto Interrupter ITR8104
Features Fast response time High analytic Cut-off visible wavelength λp=940nm High sensitivity Pb free This product itself will remain within RoHS compliant version Compliance with EU REACH Description
More information30 A Low-Side RF MOSFET Driver IXRFD631
A Low-Side RF MOSFET Driver IXRFD Features High Peak Output Current Low Output Impedance Low Quiescent Supply Current Low Propagation Delay High Capacitive Load Drive Capability Wide Operating Voltage
More information