SIEMOS PQ The Multi-Functional Power Quality Analyzer for Low and Medium-Voltage Networks
|
|
- Mitchell Potter
- 6 years ago
- Views:
Transcription
1 SIEMOS PQ The Multi-Functional Power Quality Analyzer for Low and Medium-Voltage Networks
2 SIEMOS PQ the power quality analyzer for every application The SIEMOS PQ three-phase network analysis system is the ideal tool for the daily discovery and analysis of network quality problems. It meets the specifications of IEC , class A, regarding the demands on a modern and flexibly utilizable measuring system. This means that the SIEMOS PQ network analysis system permits ad - vanced analyses for all kinds of structured power distribution systems and consistent testing of standards. The implemented measuring and evaluation algorithms make it easy to evaluate the voltage quality in accordance with the standards EN50160 and EN for low and medium-voltage distribution networks. In addition, SIEMOS PQ enables you to perform load analyses and power measurements in any kind of structured power distribution network. Thanks to the integrated fault recording function, even transient events in both the measuring voltage and measuring current can be recorded and analyzed. Finally, the ability to perform remote control frequency measurements rounds off this function package. SIEMOS PQ four measuring devices in one With the help of the SIEMOS PQ network analysis system, power quality can be analyzed and evaluated for the medium and low-voltage networks of industry and the power providers that use threephase measurement of network variables. SIEMOS PQ can acquire up to 1,900 different measured values (e.g., voltage, current, frequency, power, voltage unbalances, flicker, harmonics and intermediate harmonics) in one continuous recording. Based on the particular measuring task, any measuring interval between 1 second and 30 minutes can be selected without having to restrict the number of parameters to be analyzed. In addition, threshold and limit values, evaluation algorithms and measuring functions are flexible and can be adjusted to each evaluation task. The SIEMOS PQ network analysis system records a wide range of details applicable to the parameters selected by the user. Just a few examples: Cyclic data (network frequency, voltages, currents, powers) Manually and automatically-triggered oscilloscope recordings Manually and automatically-triggered recordings of 10-msec RMS (Root-Mean-Square) values Audio-frequency remote control signals Power quality events To ensure that this wide range of measuring functions is provided, SIEMOS PQ combines four functional measuring devices in one hardware and software platform. Function 1: Statistic measurement as per EN50160 / IEC / IEC Function 2: Cyclic measurement as statistic measurement in an arbitrary measurement interval Function 3: Oscilloscope measurements for acquisition of transient events Function 4: Fast RMS value measurements (10-msec, RMS values)
3 SIEMOS PQ mobility pure The dimensions of the basic device make it a compact measuring device. Due to the high degree of protection (IP65), it can be used in all power supply systems as well as under the sometimes rugged conditions of industrial systems (e.g., even coal mining operations!). The device's design as well as the insulation of the signal inputs and the insulation of the measuring device itself comply with the requirements of IEC for measuring categories CATIII (600 V) and CAT IV (300 V). The device can be powered either by existing low-voltage power supply systems or the measuring voltage. The SIEMOS PQ is equipped with a built-in, uninterruptible power supply as a power backup. SIEMOS PQ is equipped with a four-line display indicating either the Setup parameters or various screens with measured values or status information while a measurement is being made. The keys Start/Stopp (start/stop), Manual Trigger (manual trigger), Scroll through Display (page) and Setup make the device easy to use even without external software. All primary measurement settings can be made on the device itself - without extra software. The measured data are stored in an internal, non-volatile, 1-Gbyte data memory. The measured values can be stored over long periods of time of up to one year depending on the number of parameters to be evaluated and the measuring interval selected. The SIEMOS PQ is equipped with a high-speed USB 2.0 interface for transferring the measured values from internal memory to the PC. Evaluation of the data acquired by the SIEMOS PQ network analysis system is simple with the included WinPQ mobile software. You can run individual single evaluations with this software or generate automatic reports based on previously defined standard values. SIEMOS PQ customer benefits include variability and versatile use The network analysis system device is designed to cover a wide range of application areas in low and medium-voltage systems. Analysis of both steady-state and transient faults Recognition of the cause of device malfunctions for later damage minimization and preventive maintenance Adherence to service quality demands Network quality check at the power feed-in point Network quality measurement Evaluation of the basic network quality to check compatibility with critical systems prior to installation Real load measurement Capacity check of the electrical systems before power consumers are connected Evaluation of power consumption and network quality Check of the effects of system improvements by measuring power consumption, power factors and the general network quality before and after the improvements are implemented
4 SIEMOS PQ system safety with intelligent accessories The SIEMOS PQ network analysis system includes the basic device and extensive accessories for the connection of voltage and current channels. Various test clips (including fuseprotected models) are included for the connection of the voltage channels to the system voltages to be measured. When you measure the currents, you no longer have to provide galvanic connection of the measuring device to the current circuits that you want to measure. The standard package contains a set (4 each) of high-precision, mini current clamps (100 ma to 22 A RMS) especially for measurements in secondary circuits of current transformers in medium and high-voltage systems. In addition, the standard package includes a set (4 each) of Rogowski coils (1 A to 5300 A RMS) for measurements on cable or bus bar systems in low-voltage systems. The special type of construction of both types of current clamps ensures high precision in the frequency range from 40 Hz to 5 khz with an amplitude and angle fault of less than 1% of the particular measured value. You no longer need to provide special parameterization of the current connectors in the Setup of the particular measurement SIEMOS PQ automatically recognizes the connected current clamp set by the coding in their plug connectors and sets the measuring ranges accordingly. This means that the device no longer has to be separately told the transformation ratio of the particular clamp. The measuring system comes in a sturdy carrying case for safe transportation of the basic device and its accessories.
5 SIEMOS PQ and WinPQ mobile measured data handling made easy Up to 1,900 system parameters can be recorded over a long period of time with the internal, 1-Gbyte system memory. This seems like a tough job for the software that is responsible for evaluating the measured network data. The WinPQ mobile software is especially adapted to the SIEMOS PQ and makes child s play out of this evaluation job. WinPQ mobile allows both online evaluation of the measured parameters and a detailed evaluation after conclusion of a measurement (offline evaluation) and transmission of the data from the device to the PC. In online mode, the shapes of the latest curves of the particular voltage and current signals can be presented in realtime. In addition, online mode enables a realtime presentation of the harmonics spectrum (including intermediate harmonics) up to 5,000 Hz. The DC portion of the signal value can also be evaluated. In addition to these variables, online mode permits a realtime presentation of the direction of power flow of the harmonics at the measuring point and the latest power values (active power, reactive power, distortion reactive power, cos(phi) displacement factor and Lambda power factor). In offline mode, detailed individual evaluations can be made as well as an automatically generated measuring report based on previously defined limit values. Individual evaluation is available for all cyclic parameters recorded in a free measurement interval (1 second to 30 minutes) such as network frequency, voltages, currents and powers. In addition, recordings of transient events can be evaluated as oscilloscope recordings or recordings of 10-ms RMS values. A special feature of the SIEMOS PQ is its ability to record any frequency in the range from 0 Hz to 5 khz in addition to the harmonics. This function can evaluate the magnitude of remote control signals. As with the other measuring signals too, this function can be used to trigger a certain, previously defined remote control frequency and thus acquire, present and evaluate complete telegrams. The WinPQ mobile has an integrated report generator for highspeed statistical evaluation of measured values with regard to standard conformance. The values that are measured over a period of time are evaluated in easy-to-understand diagrams and tables with regard to the pre-specified, applicable standard. A printout of the report with customer-specific header and detail data as well as the previously generated diagrams and tables provides you with quick, systematic documentation of the results of your measurements.
6 Maschinenfabrik Reinhausen GmbH Power Quality Management Alte Chaussee Erfurt, Germany Phone (+49) 3 61/ Fax (+49) 3 61/ support.pqm@reinhausen.com SIEMOS PQ technical data Inputs / signal conditioning Measuring inputs 4x U L1, L2, L3, N, PE Device 400 V AC (570 V DC) L-N 690 V AC (980 V DC) L-L 4x I L1, L2, L3, N Device 230 mv for mini current clamps and Rogowski coils Mini current conn. 100 ma A Rogowski coils 1 A... 5,300 A (circumference 91 cm) Sampling rate khz at 50 Hz Corresponds to 2048 samples / 200 ms A/D converter 24-bit Area for PLL 45 Hz to 65 Hz Measuring interval / data memory Free measuring interval 1 second to 30 minutes Can be set as desired Data memory 1 GByte Power / interfaces Power voltage 100 V V AC // 100 V V DC Interfaces USB 2.0 Time synchronization DCF77 or GPS radio clock Device class / accuracy Standard IEC / class A Accuracy Measuring error < 0.1 % (device) Measuring error <1 % (current clamps) Temperature range Operation -20 C C Storage -30 C C Dimensions / setup Display 4 lines, illuminated Dimensions 220 x 146 x 57 mm Weight 1.7 kg Protection degree IP65 Insulation category CAT III / 600V CAT IV / 300V Please note: The data in our publications may differ from the data of devices delivered. We reserve the right to make changes without notice. IN /00 EN 04/10 F dp Printed in Germany
PQ-Box 100 Network Analyzer for Low-, Medium- and High-Voltage Networks
GB Technical data Issue 06/2009 PQ-Box 100 Network Analyzer for Low-, Medium- and High-Voltage Networks Fault detection Evaluation of voltage quality according to EN50160 and IEC61000-2-2 Fault recorder
More informationNetwork Analyzer for Low-, Medium- and High-Voltage Networks
Technical data Network nalyzer for Low-, Medium- and High-Voltage Networks Model PQ-Box 150 1 Fault detection 1 Evaluation of voltage quality according to EN50160 and IEC61000-2-2 (2-4) 1 FFT nalysis up
More informationNetwork Analyzer for Low-, Medium- and High-Voltage Networks
Technical data Network nalyzer for Low-, Medium- and High-Voltage Networks Model PQ-Box 100 1 Fault detection 1 Evaluation of voltage quality according to EN50160 and IEC61000-2-2 (2-4) 1 Fault recorder
More informationNetwork Analyzer for Low-, Medium- and High-Voltage Networks
Technical data Network nalyzer for Low-, Medium- and High-Voltage Networks Model PQ-Box 150 1 Fault detection 1 Evaluation of voltage quality according to EN50160 and IEC61000-2-2 (2-4) 1 FFT nalysis up
More informationPower Quality Analyzer / High Frequency Recorder
Technical data Power Quality nalyzer / High Frequency Recorder Model PQ-Box 300 1 Fault detection 1 Evaluation of voltage quality according to EN50160 und IEC61000-2-2/-2-4 1 Permanent FFT nalysis from
More informationFluke Three-Phase Power Quality Recorder Topas. Class-A compliance for the most demanding power quality tests
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Fluke 1760 Three-Phase Power Quality Recorder Topas Technical Data Class-A compliance for the most demanding
More informationFluke 1740 Series. Three-Phase Power Quality Loggers Memobox. Assess power quality and conduct long-term studies with ease
Fluke 1740 Series Three-Phase Power Quality Loggers Memobox Technical Data Assess power quality and conduct long-term studies with ease Compact and rugged, the Fluke 1740 Series three-phase power quality
More informationFluke 1740 Series. Three-Phase Power Quality Loggers Memobox. Assess power quality and conduct long-term studies with ease
Fluke 1740 Series Three-Phase Power Quality Loggers Memobox Technical Data Assess power quality and conduct long-term studies with ease Compact and rugged, the Fluke 1740 Series three-phase power quality
More informationUser manual Technical parameters. multilog 2. Light Expert. Network analyzer for low, medium and high voltage networks
User manual Technical parameters multilog 2 Light Expert Network analyzer for low, medium and high voltage networks 2 i Note Please note that this manual cannot represent the most current device version
More informationSmart Energy & Power Quality Solutions. Portable energy measurement devices COMPACT FLEXIBLE PRECISE
Portable energy measurement devices COMPACT FLEXIBLE PRECISE Portable energy measurement devices COMPACT FLEXIBLE PRECISE The portable energy measurement devices from Janitza Stay flexible with the portable
More informationGRIDCON ACF ACtIve FIlteRs FOR CleAN voltage AN ACtIve IMpACt IN the GRID. power QuAlIty
GRIDCON ACF ACtIve FIlteRs FOR CleAN voltage AN ACtIve IMpACt IN the GRID. power QuAlIty GRIDCON ACF GRIDCON ACF active filters a clean grid for efficient and stable production. 2 Saving energy and keeping
More informationOperating manual. Power Quality Analyser PQ-Box 100. Power Quality Software. g Type PQ-Box 100
Operating manual Power Quality Analyser PQ-Box 100 Power Quality Software g Type PQ-Box 100 We take care of it Note: Please note that this operating manual cannot describe the latest version of the device
More informationDRTS 66 The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
More informationSupervision and analyse of the electrical network EN50160 & POWER QUALITY
Supervision and analyse of the electrical network EN50160 & POWER QUALITY Controls the quality of the network following EN50160 and CEI 61000-3-6/7 Complies to the CEI 61000-4-30 class A Standard! Records
More information3 Phase Power Quality Analy er
3 Phase Power Quality Analy er BlackBox G4500 The 3 Phases Portable Power Quality Analyzers Discover Outstanding Features The BlackBox portable series power quality analyzer takes power quality monitoring
More informationEnergy Explorer PROFESSIONAL POWER & HARMONICS ANALYSER
1 Energy Explorer PORTABLE POWER ANALYSERS DESCRIPTION PROFESSIONAL POWER & HARMONICS ANALYSER ENERGY EXPLORER is an advanced Power Analyser, designed for use by electricians, plant engineers and energy
More informationReliable Power Meters Multipoint Power Recorder
Reliable Power Meters Multipoint Power Recorder High-speed capability for permanent installation Technical Data What is Full Disclosure Technology? Full Disclosure Technology is built into all Fluke and
More informationCMC 256plus - protection relay test set and universal calibrator
Technical Data - protection relay test set and universal calibrator The is the universal solution for testing old and new generation relays and calibrating all kinds of meters, PQ devices and transducers.
More informationDRTS-6. DRTS-6 has been designed to test: DRTS-6. Advanced Protection Relay Test Set and Measurement System
DRTS-6 Advanced Protection Relay Test Set and Measurement System MULTI-TASKING EQUIPMENT DESIGNED FOR TESTING PROTECTION RELAYS, ENERGY METERS, TRANSDUCERS POWERFUL AND LIGHTWEIGHT HIGH ACCURACY: BETTER
More informationMoving Test - MT3000
Moving Test - MT3000 Three-Phase Portable Test System Keep ahead with Modular Design The Modular Concept The MT3000 is based on a real modular design concept to provide the greatest possible flexibility
More informationFluke 1750 Three-Phase Power Recorder
TECHNICAL DATA Fluke 1750 Three-Phase Power Recorder Never miss capturing a disturbance with the exclusive threshold-free measurement system, it s automatic. Capture every measurement, every event, on
More informationPQM3000R Class A network analyzer according to EN for power quality monitoring
Class A network analyzer according to EN 50160 for power quality monitoring Possibility to carry out parameter recording according to EN 50160 Integrated web server for complete device management 4 GB
More informationMETRAClip87 and 88 Clamp Multimeters
3-349-795-03 1/7.14 Current and frequency measurement via clamp meter: METRAClip87: 1500 A AC TRMS and 1500 A DC METRAClip88: 2000 A AC TRMS and 3000 A DC Multimeter functions via connector sockets: V
More informationDM-5 Power Quality Analyzer
amprobe.com DM-5 Power Quality Analyzer With Feature Packed Software, most Compact High Performance Power Quality Analyzer in its Class Poor power quality is costly not only can it drive up energy bills
More informationUNIT-4 POWER QUALITY MONITORING
UNIT-4 POWER QUALITY MONITORING Terms and Definitions Spectrum analyzer Swept heterodyne technique FFT (or) digital technique tracking generator harmonic analyzer An instrument used for the analysis and
More informationHV / MV / LV electrical network quality analyzers Class A. Communication port: local, modem, integrated Ethernet, multi-point
2010 MAP Range HV / MV / LV electrical network quality analyzers Class A > Network quality Analyzers PRODUCT ADVANTAGES COMPLIANT with the EN 61000-4-30 standard, Class A DETECTION of the fault LOCATION
More informationPower Quality Analyzer Topas 2000
Power Quality Analyzer Topas 2000 Effecting measurement tasks in medium and low voltage networks faster and with a single tool: Complies with IEC 61000-4-30 class A with synchronization to power frequency
More informationFluke 3540 FC Three-Phase Power Monitor
TECHNICAL DATA Fluke 3540 FC Three-Phase Power Monitor The 3540 FC Three-Phase Power Monitor is a compact device to monitor three-phase systems and stream data to the Fluke Connect Cloud. The measurement
More informationMEASURING INSTRUMENTS AND TESTERS
MEASURING INSTRUMENTS AND TESTERS Electrical Installation Safety High Voltage Insulation / Continuity / Earth Appliance / Machine / Switchboard Safety Power Quality Analysis LAN Cabling Certification Indoor
More informationC.A Complete electrical network analysis at the tips of your fingers! Power Quality Monitor. Keeping up with the standards
Keeping up with the standards C.A 8352 Power Quality Monitor Complete electrical network analysis at the tips of your fingers! All measurements for complete analysis: powers, harmonics, flicker, symmetry,
More informationMETRAClip85 and 86 Clamp Multimeters
3-349-794-03 1/8.14 Current and frequency measurement via clamp meter: 600 A AC TRMS and 900 A DC (automatic or manual switching) Multimeter functions via connector sockets: V (AC TRMS and DC) up to 1000
More informationComplimentary Reference Material
Complimentary Reference Material This PDF has been made available as a complimentary service for you to assist in evaluating this model for your testing requirements. TMG offers a wide range of test equipment
More informationFluke Advanced Test Equipment Rentals ATEC (2832) Three-Phase Power Recorder
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Fluke 1750 Three-Phase Power Recorder Technical Data Never miss capturing a disturbance with the exclusive threshold-free
More informationElectronic AC Load ZSAC Series. 400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A. Rev. 3.03
Electronic AC Load Series 400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A Rev. 3.03 Electronic AC Loads, Series Interface overview RS-232 USB GPIB LAN System bus Analog / Analog isolated X X Standard
More informationPower Quality Solutions PQSine P-Series of Active Harmonic Filters and Power Optimizers
EPCOS Product Brief 2017 Power Quality Solutions of Active Harmonic Filters and Power Optimizers EPCOS has been offering a comprehensive range of key components for power factor correction (PFC) and power
More informationMPQ1000. Handheld Power Quality Analyzer. Automatic CT recognition. Automatic connection verification. On-board data analysis
Automatic CT recognition Automatic connection verification On-board data analysis SD card and USB stick support 1000 V ac and 1000 V dc range Scope and DMM modes CATIV @ 600 V IEC61000-4-30 Class A compliant
More informationA Power Quality Interface for Low and Medium Voltage Smart Grids
Technical Data Power Quality Interface for Low and Medium Voltage Smart Grids Model PQI-D smart 1 Wall-mounted housing 1 DIN-Rail housing 1 Panel mounting housing 1. pplication Solving all measurement
More informationN. TEST TEST DESCRIPTION
Multi function system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy meters and transducers Primary injection testing capabilities
More information9063-RC Data Acquisition and Control Interface
9063-RC Data Acquisition and Control Interface LabVolt Series Datasheet Festo Didactic en 230 V - 50 Hz 11/2017 Table of Contents General Description 2 LVDAC-EMS 2 Metering 3 Oscilloscope 3 Phasor Analyzer
More informationThe experience of the Qualistar ensuring high performance
C.A 8332B C.A 8334B C.A 8335 The experience of the Qualistar ensuring high performance POWER AND ENERGY QUALITY ANALYSERS 3U IEC 61010 1000 V CAT III IEC 61010 600 V CAT IV 4V Measure all the necessary
More informationPower Analyser AM-10-PA2
measurement competence centre www.artemes.org 24 bit Resolution Power Analyser AM-10-PA2 2 M Samples per Second Power Analyser AM-10-PA2 PQ + PMU + PFR + PM + DFR 24 bit resolution 2M samples/sec. fault
More informationFluke Fluke-Direct.ca. Three-Phase Power Logger. Technical Data
Fluke 1735 Three-Phase Power Logger Technical Data Electrical load studies, energy consumption testing, and general power quality logging The Fluke 1735 Three-Phase Power Logger is the ideal electrician
More informationWith any other power quality analyzer you re just wasting energy.
With any other power quality analyzer you re just wasting energy. Fluke 430 Series II Power Quality and Energy Analyzers Fluke 430 Series II Models 434 Series II Energy Analyzer The Fluke 434 Series II
More informationFluke Three-Phase Power Recorder. Plug and play: Set up in minutes with selfidentifying
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Fluke 1750 Three-Phase Power Recorder Technical Data Never miss capturing a disturbance
More informationPRECISION CLAMP ON FLEXIBLE ROGOWSKI COIL CURRENT TRANSFORMER
JRF333M-X 333mVAC 24VDC, 2VA S1 S2 Vin + Vin - PRECISION CLAMP ON FLEXIBLE ROGOWSKI COIL CURRENT TRANSFORMER LED SINGLE PHASE output 333mV AC THREE PHASE output 333mV AC Power isast OPEN RCT is made with
More informationFluke Three-Phase Power Recorder. Never miss capturing a disturbance - with the exclusive threshold-free measurement system, it s automatic.
Fluke 1750 Three-Phase Power Recorder Technical Data Never miss capturing a disturbance - with the exclusive threshold-free measurement system, it s automatic. Capture every measurement, every event, on
More informationPower Quality and Energy Measurement PEM575
Power Quality and Energy Measurement _D00016_03_D_XXEN/12.2015 Power Quality and Energy Measurement Product description The digital universal measuring device is suited for measuring and displaying electrical
More informationE6500 Power Quality Analyzer
E6500 Power Quality Analyzer E6500 power quality analyzer can record and analyze all power quality parameters such as harmonics, voltage, current, frequency, fluctuation, flicker, power and three-phase
More informationFluke 3540 FC Three-Phase Power Monitor
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com TECHNICAL DATA Fluke 3540 FC Three-Phase Power Monitor THREE-PHASE MONITORING AND STREAMING Monitor three-phase
More informationRIGOL Data Sheet. DG3000 Series Function/Arbitrary Waveform Generator DG3121A, DG3101A, DG3061A. Product Overview. Easy to Use Design.
RIGOL Data Sheet DG3000 Series Function/Arbitrary Waveform Generator DG3121A, DG3101A, DG3061A Product Overview DG3000 Series Function/Arbitrary Waveform Generators adopt DDS technology, which enables
More informationMedium Voltage Products. KECA 80 C85 Indoor current sensor
Medium Voltage Products KECA 80 C85 Indoor current sensor Parameters for Application Value Rated primary current of application up to 2 500 A Sensor Parameters Value Highest voltage for equipment, U m
More informationPower Quality Analysers
Power Quality Analysers Review of Power Quality Indicators and Introduction to Power Analysers ZEDFLO Australia 6-Mar-2011 www.zedflo.com.au Power Quality Indicators Review of main indicators of electrical
More informationNEW! Transient Data Acquisition. Stand alone. Compact. Powerful.
NEW! Transient Data Acquisition Stand alone. Compact. Powerful. Data recorder Faul Synchronous and fast Expert Transient is a data recorder that can operate independently for the synchronous acquisition
More informationACE3 INTELLIGENT BROADBAND AMPLIFIER
12.4.2017 1(8) ACE3 INTELLIGENT BROADBAND AMPLIFIER Features ACE3 is the most advanced compact amplifier on the market. It has 1.2 GHz frequency range and integrated electrical controls in both up- and
More informationASSESSING COMPLICATED POWER QUALITY ISSUES OFF-LINE WITH IEC COMPLIANT TOOLBOX
ASSESSING COMPLICATED POWER QUALITY ISSUES OFF-LINE WITH IEC 61000-4-30 COMPLIANT TOOLBOX Bernard Dethy (bernard.dethy@laborelec.com ) Emmanuel De Jaeger (emmanuel.dejaeger@laborelec.com) Michel Dascotte
More informationPower Quality and Energy Measurement PEM533
Power Quality and Energy Measurement _D00013_02_D_XXEN/11.2014 Power Quality and Energy Measurement 0.5 S Product description The digital universal measuring device is suited for measuring and displaying
More informationN. TEST TEST DESCRIPTION
Multi function system for testing substation equipment such as: current, voltage and power transformers, over-current protection relays, energy meters and transducers Primary injection testing capabilities
More informationDG5000 series Waveform Generators
DG5000 series Waveform Generators DG5000 is a multifunctional generator that combines many functions in one, including Function Generator, Arbitrary Waveform Generator, IQ Baseband /IQ IF, Frequency Hopping
More informationPEM353. Universal measuring device
353 Universal measuring device 353_D00335_00_D_XXEN/06.2018 353 Universal measuring device Product description The digital universal measuring device 353 is used to record and display measured quantities
More information1587/1577 Insulation Multimeters
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
More information1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com 1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation
More informationThe experience of the Qualistar, ensuring high performance
C.A 8332B C.A 8334B C.A 8335 C.A 8435 The experience of the Qualistar, ensuring high performance POWER AND ENERGY QUALITY ANALYSERS IEC 61010 1000 V CAT III 600 V CAT IV Measure all the necessary voltage,
More informationFlexible AC current probes
Flexible AC current probes Making use of the principle of Rogowski coils, the MiniFLEX models are flexible sensors offering a wide dynamic range for measuring AC intensities and viewing high-speed current
More informationDynamic MotorAnalyzer
Top-Innovator 2014 Dynamic MotorAnalyzer Online Monitoring Made in Germany Expect more. Winding testers The Dynamic MotorAnalyzer perfection in every detail The dynamic motor analysis allows testing a
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) The toolbox for substation 3-phase testing Three currents and four voltages Stand-alone functionality Rugged and reliable
More informationKončar TMS - Bushing monitoring
Končar TMS - Bushing monitoring Many recent studies have shown that bushing failure is one of the most common causes of transformer failure. Thus need for bushing diagnostic and monitoring system has risen.
More informationAC Power Transmission Training System Add- On to ( )
AC Power Transmission Training System Add- On to 8006 587433 (89252-00) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 03/2019 Table of Contents General Description 2 List of Equipment 2 List
More information2) APRV detects and records low frequency events (voltage drop, over-voltages, wave distortion) with a sampling frequency of 6400 Hz.
APRV Analyzer dfv Technologie Z.A. Ravennes-les-Francs 2 avenue Henri Poincaré 59910 BONDUES FRANCE Tel : 33 (0) 3.20.69.02.85 Fax : 33 (0) 3.20.69.02.86 Email : contact@dfv.fr Site Web : www.dfv.fr GENERAL
More informationPower Quality and Energy Measurement PEM575
Power Quality and Energy Measurement _D00016_00_D_XXEN/06.2013 Power Quality and Energy Measurement Product description The digital universal measuring device is suited for measuring and displaying electrical
More informationFluke 1736 and 1738 Three-Phase Power Loggers
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com TECHNICAL DATA Fluke 1736 and 1738 Three-Phase Power Loggers More visibility, reduced uncertainty and
More informationPower Quality Interface for Low-, Medium- and High- Voltage Networks
Technical data Power Quality Interface for Low-, Medium- and High- Voltage Networks Type PQI-D 1 s wall mounted housing 1 s DIN rail mounted housing 1. pplication The Power Quality-Interface for low-,
More informationC.A 8332 C.A Advanced Test Equipment Rentals ATEC (2832) Display your network analysis all in picture format!
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (282) Display your network analysis all in picture format! OBSERVE, DIAGNOSE, MONITOR... C.A 82 C.A 84 Three Phase Power Quality
More informationPHV RO. High impedance passive probe. Features: CeramCore TM Hybrid Probe. Modular Construction. Coaxial Design
High impedance passive probe Features: CeramCore TM Hybrid Probe Modular Construction Coaxial Design Interchangeable Spring Contact Tip Certificate of Calibration available on request Read-out BNC Connector
More informationThree Phase Power Calibrator and Tester of Power Engineering Devices
C300B Data Sheet Three Phase Power Calibrator and Tester of Power Engineering Devices C300B Power Calibrator and Tester 3-phase voltage source up to 560V 3-phase current source up to 120A and 1-phase up
More informationSupplied in carry case with additional accessories The PHV 1000-RO is a 400 MHz, standard sized, 100:1 passive probe designed for instruments
High impedance passive probe Features: CeramCore TM hybrid probe Modular construction Coaxial design Interchangeable spring contact tip Certificate of calibration available on request Read-out BNC connector
More informationRecommendations for Harmonic and Power Measurements in Electrical Networks
Recommendations for Harmonic and Power Measurements in Electrical Networks Analysis implementation and reporting requirements regarding grid power quality and equipment loads Power Capacitor Division Recommendations
More informationFluke MDA-510 and MDA-550 Motor Drive Analyzer
TECHNICAL DATA Fluke MDA-510 and MDA-550 Motor Drive Analyzer Simplify complex motor-drive troubleshooting with guided test setups and automated drive measurements that provide reliable, repeatable test
More informationTWA Series Three-Phase Winding Ohmmeters & Tap Changer & Winding Analyzers
TWA Series Three-Phase Winding Ohmmeters & Tap Changer & Winding Analyzers Resistance measurement of all tap positions in all six windings performed in a single test True three-phase on-load tap changer
More informationCapacitor protection relay
Capacitor Protection Relay FEATURES Capacitor unbalance protection Line current unbalance protection Overvoltage protection Overheating protection Ground fault protection Overcurrent protection Undercurrent
More informationGFT1504 4/8/10 channel Delay Generator
Features 4 independent Delay Channels (10 in option) 100 ps resolution (1ps in option) 25 ps RMS jitter (channel to channel) 10 second range Channel Output pulse 6 V/50 Ω, 3 ns rise time Independent control
More informationHigh precision measurement system for current and voltage IHC-A/B-RM01/03
Measurement Offset-free and low-noise 16 bit data acquisition system ISA-ASIC Internal sample rate 3,500 Hz Communication Standard RS232- or RS485 interface Advantages Direct measurement on the bus bar
More informationKistler LabAmp for DynoWare
Electronics & Software Kistler LabAmp for DynoWare Charge Amplifier and Data Acquisition for Multicomponent Force Measurement This instrument is ideal for multicomponent force-torque measurement with piezoelectric
More information400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A. Electronic Load ZSAC
400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A Electronic Load Electronic AC Loads, Interface overview RS-232 USB GPIB LAN System bus Analog X Analog isolated X Standard ption / not available 4226
More informationFluke Norma 4000/5000
Fluke Norma 4000/5000 High Precision Power Analyzers Reliable, highly accurate measurements for the test & development of power electronics Technical Data Compact Fluke Norma Series power analyzers include
More informationRF Signal Generator RIGOL TECHNOLOGIES, INC.
DSG800 Series RF Signal Generator Highly cost-effective economical RF signal generator Up to -105 dbc/hz (typical) phase noise Up to +20 dbm (typical) maximum output power Higher level of amplitude accuracy,
More informationDynamic MotorAnalyzer
Top-Innovator 2014 Online Monitoring of electric motors Made in Germany Expect more. EN Winding testers The Motor monitoring without special know-how The allows the testing of a running motor in its operational
More information2801 Multilock. Communications System Analyzer. Data Sheet. Boosting wireless efficiency
Data Sheet 2801 Multilock Communications System Analyzer Boosting wireless efficiency A real multi-talented instrument the Willtek 2801 Multilock The Willtek 2801 Multilock is a test instrument for multiple
More informationT/3000 T/3000. Substation Maintenance and Commissioning Test Equipment
T/3000 Substation Maintenance and Commissioning Test Equipment MULTI FUNCTION SYSTEM FOR TESTING SUBSTATION EQUIPMENT SUCH AS: CURRENT, VOLTAGE AND POWER TRANSFORMERS, ALL TYPE OF PROTECTION RELAYS, ENERGY
More informationTD 1000 PLUS. Secondary Injection Relay Test Set. Designed for testing relays and transducers
Secondary Injection Relay Test Set Designed for testing relays and transducers Two current outputs to test differential relays Convertible current and voltage generator With phase angle shifter Frequency
More informationACE2 INTELLIGENT BROADBAND AMPLIFIER
26.5.2017 1(6) ACE2 INTELLIGENT BROADBAND AMPLIFIER Features ACE2 is the most advanced compact amplifier on the market. It has 1.2 GHz frequency range and integrated electrical controls in both up- and
More informationMETRISO. Analog Insulation, Low Resistance and Voltage Measurement Instrument /9.14
3-349-813-3 1/9.14 Insulation measurement per EN 61557-2/VDE 413, part 2 Test voltages: 5 V, 1 V, 25 V, 5 V and 1 V Analog display of measured values and limit values Intelligent filter precise and measurement-dependent
More informationSefram. Sefram SEFRAM A new family of thermal recorders 6 to 36 channels. Make sure to visit our Website
Make sure to visit our Website http://wwwseframfr Sefram Sefram SEFRAM A new family of thermal recorders 6 to 36 channels 6 to 36 analogue channels Measurement boards : - 6 isolated channels universal
More informationTap Changer Analyzer & Winding Ohmmeter RMO25TD
Tap Changer Analyzer & Winding Ohmmeter RMO25TD Test current 5 ma 25 A DC Rapid automatic demagnetization AC Current monitoring channel Lightweight 9,5 kg Measuring range 0,1-2 k Two voltage sense channels
More informationChoosing your power quality analyzer
Choosing your power quality analyzer > Based on its specifications > Power Quality Analyzers Single-phase Permanent analyzers > page 89 > page 88 > page 91 Three-phase Non-intrusive analyzers MAP 607 MAP
More informationRIGOL Data Sheet. DG2000 Series Function/Arbitrary Waveform Generator DG2041A, DG2021A. Product Overview. Main Features.
RIGOL Data Sheet DG2000 Series Function/Arbitrary Waveform Generator DG2041A, DG2021A Product Overview DG2000 Series Function/Arbitrary Waveform Generators adopt DDS technology, which enables to generate
More informationVector Network Analyzers ZVB
Specifications Version 05.00 Vector Network Analyzers ZVB September 2005 Specifications MEASUREMENT RANGE...3 MEASUREMENT SPEED...5 MEASUREMENT ACCURACY...6 EFFECTIVE SYSTEM DATA...8 TEST PORT OUTPUT...8
More informationPQM3000RGW Class A rack 19 power quality analyzer with Rogowski coils
Class A rack 19 power quality analyzer with Rogowski coils Rack 19 mounting Current inputs for direct connection of Rogowski coils Harmonics and interharmonics measurement Data recording for further EN
More informationWaveStation Function/Arbitrary Waveform Generators
WaveStation Function/Arbitrary Waveform Generators Key Features High performance with 14-bit, 125 MS/s and 16 kpts 2 channels on all models Large 3.5 color display for easy waveform preview Over 40 built-in
More information400 MHz Passive High-Voltage Probe R&S RT-ZH
Manual 400 MHz Passive High-Voltage Probe R&S RT-ZH11 1409.7737.02 Printed in Germany Test and Measurment Manufacturer ROHDE & SCHWARZ For comprehensive information about Rohde and Schwarz, please visit
More information1742, 1746 and 1748 Three-Phase Power Quality Loggers
TECHNICAL DATA 1742, 1746 and 1748 Three-Phase Power Quality Loggers Troubleshoot, quantify energy usage and perform quality of service surveys easier than ever The Fluke 1742, 1746 and 1748 Three-Phase
More information