MAX2371/MAX2373 Evaluation Kits
|
|
- Janel Boone
- 6 years ago
- Views:
Transcription
1 9-55; Rev 0; /0 MAX7/MAX7 Evaluation Kits General Description The MAX7/MAX7 evaluation kits (EV kits) simplify evaluation of the MAX7/MAX7 low-noise amplifiers (LNAs). They enable testing of the devices radio frequency (RF) performance and require no additional support circuitry. The EV kits signal inputs and outputs use SMA connectors to facilitate the connection of RF test equipment. DESIGNATION QTY DESCRIPTION C, C, C7 Open C C4, C5 C6 C8 C9 C0 C9 5pF ±5% capacitor 040_UMK05CH50JW-B 500pF ±0% capacitors Murata 040_GRP55R7H5K 6.8pF ± 0.5pF capacitor Murata 040_GRP555CH6R8DZ0E.0µF ±0% capacitor 0805_LMKBJ05MG-B 0nF ±0% capacitor Murata 040_GRP55R7C0K 0.05µF ±0% capacitor 040_EMK05B5KW-B 00nF ±0% capacitor Murata 040_GRP55R6A04K Features Easy Evaluation of the MAX7/MAX7.65V to.v Single-Supply Operation Jumpers for Analog/Digital Control All Critical Peripheral Components Included Fully Assembled and Tested DESIGNATION QTY DESCRIPTION R.0kΩ ±% resistor CC040 R 750Ω ±% resistor CC040 R 0Ω resistor CC040 L Open L L4 56nH inductor Coilcraft 008CS-560XJBC nh ±5% inductor Murata 060_LQG8HNNJ00 L5 0nH ±5% inductor Coilcraft 008CS-XJBB U MAX7EGC Maxim MAX7EGC J, J, J J4 J5, J6 P, P Ordering Information PART TEMP RANGE IC PACKAGE MAX7EVKIT -40 C to +85 C QFN MAX7EVKIT -40 C to +85 C QFN MAX7 Component List -pin headers Digi-Key S0-6-ND 6-pin header Digi-Key S0-6-ND -pin headers Digi-Key S0-6-ND SMA connectors (edge mount) Johnson Evaluate: MAX7/MAX7 Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at , or visit Maxim s website at
2 MAX7/MAX7 Evaluation Kits Evaluate: MAX7/MAX7 DESIGNATION QTY DESCRIPTION C C C, C4 C5 C6 C7 Open 00nF ±0% capacitor Murata 040_GRP55R6A04K 0.05µF ±0% capacitor 040_EMK05B5KW-B 00pF ±5% capacitors Murata 040_GRP555CH0J.pF ±0.pF capacitor Murata 040_GRP555CHRB.0µF ±0% capacitor 0805_LMKBJ05MG-B C8 0nF ±0% capacitor Murata 040_GRP55R7C0K R4.0kΩ ±% resistor CC040 R5.5kΩ ±% resistor CC040 R6 0Ω resistor CC040 L6 L8 L9 5nH ±5% inductor Coilcraft 040CS-5NXJBW 4.7nH ±0.nH inductor Murata 040_LQP5MN4N7C00.8nH ±0.nH inductor Murata 040_LQG5HNN8S00 L0 nh ±5% inductor Murata 040_LQG5HNNJ00 U MAX7EGC Maxim MAX7EGC J7, J8, J9 J0 J, J P, P4 MAX7 Component List -pin headers Digi-Key S0-6-ND 6-pin header Digi-Key S0-6-ND -pin headers Digi-Key S0-6-ND SMA connectors (edge mount) Johnson Component Suppliers SUPPLIER PHONE FAX CoilCraft Digi-Key Murata Note: Please indicate that you are using the MAX7/MAX7 when contacting these component suppliers. Quick Start The MAX7/MAX7 EV kits are fully assembled and factory tested. Follow the instructions in the Connections and Setup section for proper device evaluation. Test Equipment Required This section lists the recommended test equipment to verify operation of the MAX7/MAX7. It is intended as a guide only, and some substitutions are possible. Two RF signal generators capable of delivering at least 5dBm of output power at the operating frequency (HPE44B or equivalent) One RF power sensor capable of handling at least 0dBm of output power at the operating frequency (HP848A or equivalent) One RF power meter capable of measuring up to 0dBm of output power at the operating frequency (HP47B or equivalent) An RF spectrum analyzer that covers the MAX7/MAX7 operating frequency range, as well as a few harmonics (FSEB0, for example) A network analyzer (HP875D, for example) to measure small-signal return loss and gain (optional) Two power supplies capable of up to A at.65v to.v An optional ammeter for measuring the supply current SMA cables Connections and Setup This section provides a step-by-step guide to operating the EV kits and testing the devices function. Do not turn on the DC power or RF signal generators until all connections are made: ) Connect a DC supply set to.775v (through an ammeter if desired) to the and GND on the EV kit. Do not turn on the supply. ) Connect one RF signal generator to the LNA_IN
3 MAX7/MAX7 Evaluation Kits SMA connector. Do not turn on the generator s output. Set the generator for proper output frequency and power level. ) Connect the spectrum analyzer to LNA_OUT. Set the spectrum analyzer to a center frequency of 50MHz (MAX7) or 900MHz (MAX7). 4) Connect the jumpers to set the desired mode of operation (RX Enable/Disable, High/Low Attenuation, High/Low Current). 5) Connect a DC supply set to.875v (V CC / for maximum gain) to AGC. Do not turn on the supply. 6) Turn on the DC supplies. 7) Activate the RF generator s output. Refer to the Electrical Characteristics Table in the data sheet for specifications in different operation modes. 8) Another method for determining gain is by using a network analyzer (optional). This has the advantage of displaying gain versus a swept-frequency band, in addition to displaying input return loss. Refer to the network analyzer manufacturer s user manual for setup details. Layout Issues A good PC board is an essential part of an RF circuit design. The EV kit PC board can serve as a guide for laying out a board using the MAX7/MAX7. Keep traces carrying RF signals as short as possible to minimize radiation and insertion loss. Use impedance control on all RF signal traces. nodes on the PC board should have decoupling capacitors to the closest ground. Refer to the Layout section of the MAX7/ MAX7 data sheet for more information. Evaluate: MAX7/MAX7
4 MAX7/MAX7 Evaluation Kits Evaluate: MAX7/MAX7 SMA_EDGE_6 P L OPEN J C 5pF C OPEN L 56nH R.kΩ C0 0.05µF R 750Ω J4- J4- J4- J4-4 J4-5 J4-6 C9 00nF L4 nh 0 GND RF_ RSET C LNA_IN AGC_BYP OPEN LNA_E C4 500pF 9 LNA_ 8 RX_EN LNA_OUT C7 OPEN RF_ATTN AGC LNA_I U MAX7 L5 0nH 7 C5 500pF C6 6.8pF SMA_EDGE_6 P J C9 0nF J J5 R 0Ω J6 C8 µf Figure. MAX7 EV Kit Schematic 4
5 MAX7/MAX7 Evaluation Kits SMA_EDGE_6 P L6 5nH J7 C 00nF R4.kΩ R5.5kΩ Evaluate: MAX7/MAX7 J0- J0- J0- J0-4 J0-5 J0-6 L8 4.7nH L9.8nH 0 GND RF_ RSET LNA_IN AGC_BYP LNA_E C 00pF 9 LNA_ 8 RX_EN LNA_OUT C7 OPEN RF_ATTN AGC LNA_I U MAX7 7 L0 nh C 0.05µF C4 00pF C5.pF SMA_EDGE_6 P4 J8 C8 0nF J9 J R6 0Ω J C6 µf Figure. MAX7 EV Kit Schematic 5
6 MAX7/MAX7 Evaluation Kits Evaluate: MAX7/MAX7.0".0" Figure. MAX7/MAX7 EV Kit Component Placement Guide Component Side Figure 4. MAX7/MAX7 EV Kit PC Board Layout Layer.0".0" Figure 5. MAX7/MAX7 EV Kit PC Board Layout Layer Figure 6. MAX7/MAX7 EV Kit PC Board Layout Primary Component Side 6
7 MAX7/MAX7 Evaluation Kits.0" Figure 7. MAX7/MAX7 EV Kit PC Board Layout Secondary Side Evaluate: MAX7/MAX7 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 0 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Maxim Integrated Products 1
9-92; Rev 0; /0 MAX2242 Evaluation Kit General Description The MAX2242 evaluation kit (EV kit) simplifies evaluation of the MAX2242 power amplifier (PA), which is designed for 2.4GHz ISM-band direct-sequence
More informationDESIGNATION QTY DESCRIPTION
19-2686; Rev 1; 2/04 MAX2027 Evaluation Kit General Description The MAX2027 evaluation kit (EV kit) simplifies the evaluation of the MAX2027 high-linearity, digitally controlled, variable-gain amplifier.
More informationMAX2045/MAX2046/MAX2047 Evaluation Kits
19-2793; Rev 0a; 4/03 MAX2045/MAX2046/MAX2047 Evaluation Kits General Description The MAX2045/MAX2046/MAX2047 evaluation kits (EV kits) simplify evaluation of the MAX2045/MAX2046/ MAX2047 vector multipliers.
More informationMAX2605 MAX2609 Evaluation Kits
19-173 Rev 0; 9/00 MAX205 MAX209 Evaluation Kits General Description The MAX205 MAX209 evaluation kits (EV kits) simplify evaluation of this family of voltage-controlled oscillators (VCOs). These kits
More informationQuadruple-Mode LNA/Mixer Evaluation Kits
19-2521; Rev 0; 7/02 Quadruple-Mode LNA/Mixer Evaluation Kits General Description The MAX2530/MAX2531/MAX2538 evaluation kits (EV kits) simplify evaluation of the MAX2351/MAX2354/ MAX2358/MAX2359/MAX2530/MAX2531/MAX2537/
More informationMAX3580 Evaluation Kit. Evaluates: MAX3580. Features
19-0845; Rev 0; 7/07 MAX3580 Evaluation Kit General Description The MAX3580 evaluation kit (EV kit) simplifies evaluation of the MAX3580 direct-conversion tuner. It enables testing of the device s performance
More informationEvaluates: MAX2686/MAX2688. MAX2686/MAX2688 Evaluation Kit. General Description. Quick Start. Features. Required Equipment
MAX2686/MAX2688 Evaluation Kit Evaluates: MAX2686/MAX2688 General Description The MAX2686/MAX2688 evaluation kits (EV kits) simplify the evaluation of the MAX2686/MAX2688 GPS/ GNSS low-noise amplifiers
More information0.1µF ±5% ceramic capacitors (0603) Murata GRM188R71C104KA01 C13, C16, C18, C19 JU1, JU2, JU5, JU6. Maxim Integrated Products 1
9-97; Rev 0; /05 MAX70 Evaluation Kit General Description The MAX70 evaluation kit (EV kit) allows for a detailed evaluation of the MAX70 superheterodyne receiver. It enables testing of the device s RF
More informationMaxim Integrated Products 1
19-3287; Rev 2; 6/07 General Description The MAX3969 evaluation kit (EV kit) is a fully assembled and tested demonstration board for the MAX3969 limiting amplifier. The EV kit allows easy programming of
More informationMaxim Integrated Products 1
19-2888; Rev 0; 5/03 General Description The MAX2055 evaluation kit (EV kit) simplifies the evaluation of the MAX2055 high-linearity, digitally controlled, variable-gain analog-to-digital converter (ADC)
More informationSUPPLIER PHONE FAX WEBSITE TDK Maxim Integrated Products 1
19-2574; Rev 0; 9/02 MAX4001 Evaluation Kit General Description The MAX4001 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that evaluates the MAX4001 RF-detecting controller
More informationC13, C16, C18, C19. Maxim Integrated Products 1
9-609; Rev ; /0 MAX470 Evaluation Kit General Description The MAX470 evaluation kit (EV kit) allows for a detailed evaluation of the MAX470 superheterodyne receiver. It enables testing of the device s
More informationMAX2306/MAX2308/MAX2309 Evaluation Kits
9-09; Rev 0; 7/0 MAX0/MAX08/MAX09 Evaluation Kits General Description The MAX0/MAX08/MAX09 evaluation kits (EV kits) simplify testing of the MAX0/MAX08/ MAX09 IF receivers. These kits allow evaluation
More informationMAX2320/21/22/24/26/27 Evaluation Kits
9-; Rev ; /00 MAX0/////7 Evaluation Kits General Description The MAX0/MAX/MAX/MAX/MAX/ MAX7 evaluation kits (EV kits) simplify evaluation of these high-linearity, silicon germanium (SiGe), dualband LNAs/mixers.
More informationMaxim Integrated Products 1
9-907; Rev ; /0 MAX7 Evaluation Kit General Description The MAX7 evaluation kit (EV kit) allows for a detailed evaluation of the MAX7 ASK transmitter. It enables testing of the device s RF performance
More informationLNAs with Step Attenuator and VGA
19-231; Rev 1; 1/6 EVALUATION KIT AVAILABLE LNAs with Step Attenuator and VGA General Description The wideband low-noise amplifier (LNA) ICs are designed for direct conversion receiver (DCR) or very low
More informationMAX2720/MAX2721 Evaluation Kits
9-75; Rev 0; 4/00 MAX70/MAX7 Evaluation Kits General Description The MAX70/MAX7 evaluation kits (EV kits) simplify evaluation of the MAX70/MAX7 direct I/Q modulator with variable gain amplifier (VGA) and
More informationMaxim Integrated Products 1
9-76; Rev 0; 5/05 General Description The MAX479 evaluation kit (EV kit) allows for a detailed evaluation of the MAX479 ASK/FSK transmitter. It enables testing of the device s RF performance and requires
More informationMAX2900 MAX2904 Evaluation Kits
9-0; Rev 0; 7/0 MAX900 MAX90 Evaluation Kits General Description The MAX900 MAX90 evaluation kits (EV kits) simplify testing of the MAX900 MAX90. The EV kits allow evaluation of the MAX900 MAX90 s BPSK,
More informationMAX3540 Evaluation Kit. Evaluates: MAX3540
19-4164; Rev 0; 6/08 MAX3540 Evaluation Kit General Description The MAX3540 evaluation kit (EV kit) simplifies the testing and evaluation of the MAX3540 NTSC, ATSC, and hybrid tuner. The EV kit is fully
More informationR1, R2, R12, R13 TP5 TP10, TP12 7. Maxim Integrated Products 1
19-263; Rev 0; 10/02 MAX393 Evaluation Kit General Description The MAX393 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX393 10.7Gbps compact
More informationMaxim Integrated Products 1
19-3533; Rev 0; 1/05 MAX9996 Evaluation Kit General Description The MAX9996 evaluation kit (EV kit) simplifies the evaluation of the MAX9996 UMTS, DCS, and PCS base-station downconversion mixer. It is
More information*Requires component changes
9-65; Rev ; 2/2 MAX7044 Evaluation Kit General Description The MAX7044 evaluation kit (EV kit) allows for a detailed evaluation of the MAX7044 ASK transmitter. It enables testing of the device s RF performance
More informationMAX3503/MAX3505 Evaluation Kits
19-2504; Rev 0; 7/02 MAX3503/MAX3505 Evaluation Kits General Description The MAX3503/MAX3505 evaluation kits (EV kits) simplify evaluation of the MAX3503 and MAX3505 CATV upstream amplifiers. The kits
More informationMAX2683/MAX2684 Evaluation Kits
9-6; Rev ; / MAX68/MAX684 Evaluation Kits General Description The MAX68/MAX684 evaluation kits (EV kits) simplify evaluation of the MAX68/MAX684.4GHz to.8ghz downconverter mixers. The EV kits are fully
More informationMaxim Integrated Products 1
19-2092; Rev 0; 7/01 MAX3507 Evaluation Kit General Description The MAX3507 evaluation kit (EV kit) simplifies evaluation of the MAX3507 CATV upstream amplifier. Each kit includes a data interface that
More informationMaxim Integrated Products 1
19-0569; Rev 0; 5/06 MAX2041 Evaluation Kit General Description The MAX2041 evaluation kit (EV kit) simplifies the evaluation of the MAX2041 UMTS, DCS, and PCS base-station up/downconversion mixer. It
More information*Exposed pad. None. Maxim Integrated Products 1
19-2069; Rev 0; 6/01 MAX3935 Evaluation Kit General Description The MAX3935 evaluation kit (EV kit) is an assembled demonstration board that enables electrical evaluation of the 10.Gbps EAM driver. The
More informationMaxim Integrated Products 1
19-2363; Rev 0; 4/02 MAX3850 Evaluation Kit General Description The MAX3850 evaluation kit (EV kit) is an assembled demonstration board that provides optical or electrical evaluation of the MAX3850. The
More informationComponent List L2, L3 2 Q1, Q2 2 J1, J3, J4 3
19-1061; Rev 1; 1/99 MAX3664 Evaluation Kit General Description The MAX3664 evaluation kit (EV kit) simplifies evaluation of the MAX3664 transimpedance preamplifier. The MAX3664 is optimized for hybrid
More informationEvaluate: MAX2828/MAX2829. MAX2828/MAX2829 Evaluation Kits. General Description. Features. Quick Start. Connections and Setup. Test Equipment Required
MAX2828/MAX2829 Evaluation Kits Evaluate: MAX2828/MAX2829 General Description The MAX2828/MAX2829 evaluation kits (EV kits) simplify the testing of the MAX2828/MAX2829. The EV kits provide 50Ω SMA connectors
More informationMaxim Integrated Products 1
19-3041; Rev 0 ; 10/03 General Description The MAX3748A evaluation kit (EV Kit) simplifies evaluation of the MAX3748A limiting amplifier. The EV kit allows for quick threshold level selections, provides
More informationMAX1002/MAX1003 Evaluation Kits
9-50; Rev 0; 6/97 MAX00/MAX00 Evaluation Kits General Description The MAX00/MAX00 evaluation kits (EV kits) simplify evaluation of the 60Msps MAX00 and 90Msps MAX00 dual, 6-bit analog-to-digital converters
More informationMAX2387/MAX2388/MAX2389
19-13; Rev 1; /1 EVALUATION KIT AVAILABLE W-CDMA LNA/Mixer ICs General Description The MAX37/MAX3/ low-noise amplifier (LNA), downconverter mixers designed for W-CDMA applications, are ideal for ARIB (Japan)
More informationR1, R2, R6, R10, R16, R17, R22, R27 R11, R30, R38, R46, R50
19-0926; Rev 0; 8/07 MAX2830 Evaluation Kit General Description The MAX2830 evaluation kit (EV kit) simplifies testing of the MAX2830 receive and transmit performance in 802.11g/b applications operating
More informationTOP VIEW RLNA PLNAIN GND CLNAIN SLEEP. Maxim Integrated Products 1
19-1736; Rev 0; 7/00 General Description The are low-noise amplifier (LNA) plus mixer ICs optimized for code-division multiple-access (CDMA) applications in both cellular and PCS bands. The MAX2323 addresses
More informationMAX2023 Evaluation Kit. Evaluates: MAX2023. Features
19-0748; Rev 0; 2/07 MAX2023 Evaluation Kit General Description The MAX2023 evaluation kit (EV kit) simplifies the evaluation of the MAX2023 direct upconversion (downconversion) quadrature modulator (demodulator)
More informationBroadband Variable-Gain Amplifiers
1-; Rev 1; / EVALUATION KIT AVAILABLE Broadband Variable-Gain Amplifiers General Description The broadband RF variable-gain amplifiers (VGA) are designed for digital and OpenCable set-tops and televisions.
More informationS Powered by +5V Supply. S Input Configurable for Electrical and Optical Evaluation
19-4980; Rev 0; 9/09 MAX3806 Evaluation Kit General Description The MAX3806 evaluation kit (EV kit) is an assembled and tested demonstration board that simplifies evaluation of the MAX3806 receiver for
More information+Denotes lead-free and RoHS compliant.
9-0634; Rev ; /08 MAX6803 Evaluation Kit General Description The MAX6803 evaluation kit (EV kit) demonstrates a current-controlled, high-output-current LED driver based on the MAX6803 current regulator.
More information+Denotes lead(pb)-free and RoHS compliant. R1, R2, R9 R12, R20, R21
19-4377; Rev 0; 11/08 MAX9924U Evaluation Kit General Description The MAX9924U evaluation kit (EV kit) is a fully assembled and tested PCB that contains a differential variable reluctance (VR) sensor interface
More informationMaxim Integrated Products 1
19-5288; Rev 0; 5/10 MAX3543 Evaluation Kit General Description The MAX3543 evaluation kit (EV kit) simplifies the testing and evaluation of the MAX3543 hybrid television tuner. The EV kit is fully assembled
More information*Exposed pad. Ferrite beads (0805) Murata BLM21A102S C15, C16, C31, C32, C37, C45. Maxim Integrated Products 1
19-2159; Rev 0; 9/01 MAX3273 Evaluation Kit General Description The MAX3273 evaluation kit (EV kit) is an assembled demonstration board that provides optical and electrical evaluation of the MAX3273. The
More informationMAX7036 Evaluation Kit Evaluates: MAX7036
General Description The MAX7036 evaluation kit (EV kit) provides a proven design to evaluate the MAX7036 ASK receiver in a TQFN package with an exposed pad. The EV kit enables testing of the device s RF
More informationMAX16803EVKIT+BJT Evaluation Kit+
19-0828; Rev 0; 5/07 MAX16803EVKIT+BJT Evaluation Kit+ General Description The MAX16803EVKIT+BJT (EV kit) demonstrates a high-current LED driver with accurate current control based on the MAX16803 current
More information+Denotes lead(pb)-free and RoHS compliant.
19-4552; Rev 0; 4/09 MAX9918 Evaluation Kit General Description The MAX9918 evaluation kit (EV kit) provides a proven design to evaluate the MAX9918 wide input range, precision unidirectional/bidirectional,
More informationIF Digitally Controlled Variable-Gain Amplifier
19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More information+Denotes lead-free and RoHS compliant.
19-4221; Rev 0; 7/08 General Description The MAX2838 evaluation kit (EV kit) simplifies testing of the MAX2838 receive and transmit performance in WiMAX applications operating in the 3.3GHz to 3.9GHz ISM
More information+Denotes lead(pb)-free and RoHS compliant. SHDN 1
19-4487; Rev 0; 3/09 MAX9922 Evaluation Kit General Description The MAX9922 evaluation kit (EV kit) is a fully assembled and tested PCB used to evaluate the MAX9922 and MAX9923 ultra-precision, high-side
More informationMaxim Integrated Products 1
9-958; Rev 0; 7/0 MAX9 Evaluation Kit General Description The MAX9 evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate the performance
More informationPART. Maxim Integrated Products 1
19-1971; Rev 2; 10/01 General Description The MAX1856 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains an inverting transformer flyback DC-DC converter.
More informationS Flexible Input and Output Configurations S Single 2.7V to 5.5V Power Supply S Fully Assembled and Tested
19-5087; Rev 0; 12/09 MAX4231 Evaluation Kit General Description The MAX4231 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX4231 single, high-output-drive CMOS operational
More informationS Rail-to-Rail Inputs/Outputs S Accomodates Easy-to-Use 0805 Components S Proven PCB Layout S Fully Assembled and Tested
9-590; Rev 0; /0 MAX96 Evaluation Kit General Description The MAX96 evaluation kit (EV kit) provides a proven design to evaluate the MAX96 low-power, MOS-input operational amplifier (op amp) in a 6-pin
More informationJU1 JU4, JU6 5. Maxim Integrated Products 1
19-840; Rev 0; 10/05 MAX86 Evaluation Kit General Description The MAX86 evaluation kit (EV kit) is designed to evaluate the MAX86 DDR power-supply solution for notebooks, desktops, and graphics cards.
More informationMaxim Integrated Products 1
9-644; Rev ; 6/00 MAX3296 Shortwave or VCSEL General Description The MAX3296 shortwave or vertical cavity-surface emitting laser (VCSEL) evaluation kit (EV kit) is an assembled, surface-mount demonstration
More informationMAX44265 Evaluation Kit Evaluates: MAX44265
19-5782; Rev 0; 3/11 MAX44265 Evaluation Kit General Description The MAX44265 evaluation kit (EV kit) provides a proven design to evaluate the MAX44265 low-power, MOS-input operational amplifier (op amp)
More informationMAX5873/MAX5874/MAX5875 Evaluation Kits
9-604; Rev ; 6/06 MAX587/MAX5874/MAX5875 Evaluation Kits General Description The MAX587/MAX5874/MAX5875 evaluation kits (EV kits) are fully assembled and tested circuit boards that contain all the components
More informationEvaluates: MAX2831. MAX2831 Evaluation Kit. General Description. Features
MAX2831 Evaluation Kit Evaluates: MAX2831 General Description The MAX2831 evaluation kit (EV kit) simplifies testing of the MAX2831 receive and transmit performance in 802.11g/b applications operating
More informationMaxim > Design Support > Technical Documents > Application Notes > Wireless and RF > APP 3571
Maxim > Design Support > Technical Documents > Application Notes > Wireless and RF > APP 3571 Keywords: automotive keyless entry, MAX2640, LNA, 315MHz, RKE, stability, automotive, keyless entry APPLICATION
More informationMAX19586/MAX19588 Evaluation Kits
9-405; Rev ; /06 MAX9586/MAX9588 Evaluation Kits General Description The MAX9586/MAX9588 evaluation kits (EV kits) are fully assembled and tested PCBs that contain all the components necessary to evaluate
More informationMAX16823 Evaluation Kit. Evaluates: MAX Features
9-077; Rev 0; /07 MAX68 Evaluation Kit General Description The MAX68 evaluation kit (EV kit) circuit demonstrates a current-controlled LED driver that uses the MAX68 current regulator. The EV kit is configured
More information+5V MAX3654 FTTH VIDEO TIA IN+ TIA IN- + OPAMP - Maxim Integrated Products 1
19-3745; Rev 0; 7/05 47MHz to 870MHz Analog CATV General Description The analog transimpedance amplifier (TIA) is designed for CATV applications in fiber-to-the-home (FTTH) networks. This high-linearity
More informationEvaluates: MAX2837. MAX2837 Evaluation Kit. General Description. Features. Quick Start. Connections and Setup
General Description The MAX2837 evaluation kit (EV kit) simplifies testing of the device s receive and transmit performance in WiMAX applications operating in the 2.3GHz to 2.7GHz ISM band. The EV kit
More information825MHz to 915MHz, SiGe High-Linearity Active Mixer
19-2489; Rev 1; 9/02 825MHz to 915MHz, SiGe High-Linearity General Description The fully integrated SiGe mixer is optimized to meet the demanding requirements of GSM850, GSM900, and CDMA850 base-station
More informationS Demonstrates the Operation of MAX9926U Modes
19-4974; Rev 0; 9/09 MAX9926U Evaluation Kit General Description The MAX9926U evaluation kit (EV kit) is a fully assembled and tested circuit board that contains a dual-channel differential variable-reluctance
More informationTOP VIEW IF LNAIN IF IF LO LO
-3; Rev ; / EVALUATION KIT AVAILABLE Low-Cost RF Up/Downconverter General Description The performs the RF front-end transmit/ receive function in time-division-duplex (TDD) communication systems. It operates
More informationMAX2390/MAX2400, MAX2391/MAX2392/ MAX2393, and MAX2396 Evaluation Kits
19-2868; Rev 0; 4/04 MAX2390/MAX2400, MAX2391/MAX2392/ General Description The MAX2390 MAX2393/MAX2396/MAX2400 ( MAX2390 family ) evaluation kits (EV kits) simplify the evaluation of these W-CDMA and TD-SCDMA
More informationPART. FREQUENCY (MHz) MAX2640 MAX C2 RF OUT. 1pF GND. Maxim Integrated Products 1
9-84; Rev ; 4/7 EVALUATION KIT AVAILABLE MHz to 5MHz SiGe General Description The are low-cost, ultra-low-noise amplifiers designed for applications in the cellular, PCS, GPS, and.4ghz ISM frequency bands.
More informationS CLK Pad for External Clock Frequency S Lead(Pb)-Free and RoHS Compliant S Proven PCB Layout
General Description The MAXFILTERBRD is an unpopulated PCB design to evaluate the MAX7408 MAX7415/ 5th-order, lowpass, switched-capacitor filters (SCFs). Contact the factory for free samples of the pin-compatible
More informationEvaluates: MAX1471. MAX1471 Evaluation Kit. Features. General Description. MAX1471 EV Kit Files
General Description The MAX1471 evaluation system (EVSYS) is a complete receiver system consisting of a MAX1471 evaluation kit (EVKIT) and a Maxim CMAXQUSB module. Order the complete EVSYS (MAX1471EVSYS)
More informationW-CDMA Upconverter and PA Driver with Power Control
19-2108; Rev 1; 8/03 EVALUATION KIT AVAILABLE W-CDMA Upconverter and PA Driver General Description The upconverter and PA driver IC is designed for emerging ARIB (Japan) and ETSI-UMTS (Europe) W-CDMA applications.
More informationMaxim Integrated Products 1
19-6285; Rev 0; 4/12 MAX44251 Evaluation Kit General Description The MAX44251 evaluation kit (EV kit) provides a proven design to evaluate the MAX44251 dual low-power, lowdrift operational amplifier (op
More informationEVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifier. Pin Configuration/Functional Diagram/Typical Application Circuit MAX2659 BIAS
19-797; Rev 4; 8/11 EVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifier General Description The high-gain, low-noise amplifier (LNA) is designed for GPS, Galileo, and GLONASS applications. Designed in
More informationEVALUATION KIT AVAILABLE 3.5GHz Downconverter Mixers with Selectable LO Doubler. PART MAX2683EUE MAX2684EUE *Exposed pad TOP VIEW IFOUT+ IFOUT-
-; Rev ; / EVALUATION KIT AVAILABLE.GHz Downconverter Mixers General Description The MAX/MAX are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital
More informationS Input Voltage from 7V Up to HB LED Forward Voltage. S Demonstrates Adaptive Output-Voltage Optimization
19-5077; Rev 0; 12/09 MAX16838 Evaluation Kit General Description The MAX16838 evaluation kit (EV kit) demonstrates the MAX16838 high-brightness LED (HB LED) driver, integrating a step-up DC-DC preregulator
More informationPART MAX2605EUT-T MAX2606EUT-T MAX2607EUT-T MAX2608EUT-T MAX2609EUT-T TOP VIEW IND GND. Maxim Integrated Products 1
19-1673; Rev 0a; 4/02 EVALUATION KIT MANUAL AVAILABLE 45MHz to 650MHz, Integrated IF General Description The are compact, high-performance intermediate-frequency (IF) voltage-controlled oscillators (VCOs)
More informationEVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifiers
19456; Rev ; 8/1 EVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifiers General Description The / low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim
More informationPART. Maxim Integrated Products 1
9-887; Rev 0; 2/00 MAX669 Evaluation System General Description The MAX669 evaluation system consists of a MAX669 evaluation kit (EV kit) and a companion Maxim SMBus interface board. The MAX669 EV kit
More informationMAX16818 Evaluation Kit. Evaluates: MAX16818
9-08; Rev 0; 6/07 MAX688 Evaluation Kit General Description The MAX688 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed-circuit board (PCB) designed to evaluate the MAX688
More informationcapacitor (0603) KEMET C0603C105K8PAC Murata GRM188R61A105K 0.1µF ±10%, 25V X7R ceramic
19-3730; Rev 1; 4/08 General Description The MAX5060 evaluation kit (EV kit) provides a +3.3V adjustable output voltage from a +12V input source. It delivers up to 20A of output current with a switching
More informationMaxim Integrated Products 1
9-75; Rev ; 5/5 MAX7 Evaluation Kit General Description The MAX7 evaluation kit (EV kit) simplifies the testing and evaluation of the MAX7 quadrature transmitter. The EV kit provides 5Ω connectors for
More informationPART MAX2265 MAX2266 TOP VIEW. TDMA AT +30dBm. Maxim Integrated Products 1
19-; Rev 3; 2/1 EVALUATION KIT MANUAL FOLLOWS DATA SHEET 2.7V, Single-Supply, Cellular-Band General Description The // power amplifiers are designed for operation in IS-9-based CDMA, IS-136- based TDMA,
More informationS Fully Assembled and Tested. Maxim Integrated Products 1
19-5281; Rev 0; 5/10 MAX15059 Evaluation Kit General Description The MAX15059 evaluation kit (EV kit) demonstrates the MAX15059 APD biasing pulse-width modulation (PWM) step-up DC-DC converter with an
More informationMAX98502 Evaluation Kit Evaluates: MAX98502
19-6275; Rev 0; 4/12 MAX98502 Evaluation Kit General Description The MAX98502 evaluation kit (EV kit) is a fully assembled and tested circuit board that uses the MAX98502 boosted Class D amplifier to drive
More informationDEMO MANUAL DC1646A LTC GHz RF Power Detector with Comparator Description
LTC556 15GHz RF Power Detector with Comparator Description The demonstration circuit 166A features the LTC 556, an UltraFast RF peak detector with a built in gain-selectable high speed operational amplifier
More informationMAX4990 Evaluation Kit. Evaluates: MAX4990
9-47; Rev 0; /07 MAX4990 Evaluation Kit General Description The MAX4990 evaluation kit (EV kit) provides a proven design to evaluate the MAX4990 high-voltage, ±5kV ESD-protected electroluminescent lamp
More informationTriple/Dual-Mode CDMA LNA/Mixers
19-17; Rev 2; 4/3 EVALUATION KIT AVAILABLE Triple/Dual-Mode CDMA LNA/Mixers General Description The receiver RF front-end IC is designed for dual-band CDMA cellular phones and can also be used in dual-band
More informationMAX16821B Evaluation Kit. Evaluates: MAX16821B. Features
9-967; Rev 0; /07 MAX68B Evaluation Kit General Description The MAX68B evaluation kit (EV kit) is a fully assembled and tested surface-mount printed-circuit board (PCB) designed to evaluate the MAX68B
More informationVI1 VI2 VQ1 VQ2 II1 II2 IQ1 IQ2. Maxim Integrated Products 1
1-22; Rev ; 1/3 High-Gain Vector Multipliers General Description The MAX4/MAX4/MAX4 low-cost, fully integrated vector multipliers alter the magnitude and phase of an RF signal. Each device is optimized
More informationMaxim Integrated Products 1
9-0; Rev ; /07 MAX0 Evaluation Kit General Description The MAX0 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB) that contains a 0W forward converter in the industry-standard
More informationMAX8654 Evaluation Kit. Evaluates: MAX8654/MAX8688
9-064; Rev ; 0/08 MAX8654 Evaluation Kit General Description The MAX8654 evaluation kit (EV kit) is a fully assembled and tested PCB that demonstrates the capabilities of the MAX8654 integrated 8A step-down
More informationBGU8309 GNSS LNA evaluation board
BGU8309 GNSS LNA evaluation board Rev. 2 12 August 2016 Application note Document information Info Content Keywords BGU8309, GNSS, LNA Abstract This document explains the BGU8309 GNSS LNA evaluation board
More informationMAX44248 Evaluation Kit. Evaluates: MAX General Description. Features. Component List. Component Supplier
General Description The MAX44248 evaluation kit (EV kit) provides a proven design to evaluate the MAX44248 low-power, dual op amps in an 8-pin FMAX M package. The EV kit circuit is preconfigured as noninverting
More information27pF TO ADC C FILTER (OPTIONAL) Maxim Integrated Products 1
19-215; Rev 6; 9/6 EVALUATION KIT AVAILABLE RF Power Detectors in UCSP General Description The wideband (8MHz to 2GHz) power detectors are ideal for GSM/EDGE (MAX226), TDMA (MAX227), and CDMA (MAX225/MAX228)
More information+Denotes lead-free and RoHS-compliant. JU2, JU4, JU5, JU12 JU8 JU11, JU13
9-0766; Rev ; /08 General Description The MAX8790A evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the high-efficiency MAX8790A white LED (WLED) driver. The MAX8790A
More informationHigh IP3 Low-Noise Amplifier
EVALUATION KIT AVAILABLE General Description The low-cost, high third-order intercept point (IP3) low-noise amplifier (LNA) is designed for applications in 2.4GHz WLAN, ISM, and Bluetooth radio systems.
More information3V 10-Tap Silicon Delay Line DS1110L
XX-XXXX; Rev 1; 11/3 3V 1-Tap Silicon Delay Line General Description The 1-tap delay line is a 3V version of the DS111. It has 1 equally spaced taps providing delays from 1ns to ns. The series delay lines
More informationMAX98355 Evaluation Kit Evaluates: MAX98355A/MAX98355B
19-6407; Rev 0; 7/12 MAX98355 Evaluation Kit General Description The MAX98355 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX98355 PCM digital input Class D power amplifier.
More informationUM User manual for the BGU7004 GPS LNA evaluation board. Document information. Keywords LNA, GPS, BGU7004. Abstract
User manual for the BGU7004 GPS LNA evaluation board Rev. 1.0 14 June 2011 User manual Document information Info Keywords Abstract Content LNA, GPS, BGU7004 This document explains the BGU7004 AEC-Q100
More information