Chronos 2 electronic timers - Plug-in 8-pin (35 mm)
|
|
- Maria Willis
- 6 years ago
- Views:
Transcription
1 hronos electronic timers Plugin pin (5 mm) elay output or change over relays Multifunction or monofunction Multirange (7 ranges, available options) Multivoltage elay output or : 50 V (0 A L) Plugin LED status indicators Option of connecting an external power supply to the control input wire sensor control option echnical specifications iming epetition accuracy (with constant parameters) Drift emperature Voltage Display precision according to IE Minimum pulse duration ypically ypically under load Maximum reset time by deenergisation ypically Immunity to breaks in supply voltage: typically Power supply Multivoltage power supply Frequency Operating range Load factor Maximum power consumption Output elements relay output or changeover relays, AgNi (cadmiumfree) ated power Maximum breaking current Minimum breaking current Voltage breaking capacity Electrical life Mechanical life Breakdown voltage acc. to IE Impulse voltage acc. to IE IE Display State displayed by LED Flashing green when on Green LED operation indicator Pulsing: timer on, no timing in progress (except functions DiD and LiL) Flashing: timing in progress Permanently lit: elay waiting, no timing in progress Input type Voltfree contact wire PNP output control option maximum residual voltage: 0. V whatever the timer power supply Other information ± 0.5 % (EI ) ± 0.05 % / ± 0. % / V ±0 % / 5 0 ms 00 ms 00 ms >0 ms depending on version, see page / 50/0 Hz 5 to 0 % n (5 to 0 % n for V A/D) 00 % 0. W V A/D.5 W 0V A VA 0V A 000 VA / 0 W 000 V A / 0W A D 0 ma / 5 VD 50V A/VD 0 5 operations 50V resistive 5 x 0 operations.5 kv / min / ma /50Hz 5 kv, wave. / 50 µs 0. V iming ypes Part numbers and voltage V c / 0V a V a / c 0 V a / c Functions Nominal current Accessories pin connector base (for the whole range) 5 iming ranges (7 ranges) s 0 s min 0 min h 0 h 00 h General specifications onforming to standards IE, EN 500/, EN 500/, LV directives (7//EE 9//EE (E marking) EM (9//EE IE 9 (7.5 mm) Approvals L SA cl pending emperatures limits use stored Installation category (acc. to IE ) reepage distance and clearance acc. to IE Degree of protection acc. to IE 59 terminal block casing front face (except k) Vibration resistance acc. to IE elative humidity acc. to IE without condensation Electromagnetic compatibility Immunity to electrostatic discharges acc. to IE 000 Immunity to electrostatic fields acc. to ENV 500/0 (IE 000) Immunity to rapid transient bursts acc. to IE 000 Immunity to shock waves on power supply acc. to IE 0005 Immunity to radiofrequency in common mode acc. to ENV Immunity to voltage dips and breaks acc. to IE 000 Mainsborne and radiated emissions acc. to EN 550 (EN 550 Group ) Fixing: plugin bases asing material Weight: plugin casing Voltage surge category kv / IP 0 IP 0 IP 50 f = 0 55 Hz A = 0.5 mm 9 % Level III (Air K / ontact KV) Level III 0V/m: 0 MHz to GHz) Level III (direct kv/ apacitive coupling clamp KV) Level III (common mode KV / residual current mode KV) Level III (0V rms: 0.5 MHz to 0 MHz) 0 % / 0 ms 0 % / 00 ms > 95 % / 5 s lass B pin Selfextinguishing 0 g Non stocked, minimum order quantity 00 units. /
2 0.s 00h O 7 05 Multifunction A At B H Ht Di D Ac Bw timer 0.s 00h OA 7 5 Monofunction A timers 0.s 00h O 7 5 Monofunction timer 0.s 00h OL 7 55 Bifunction Li L timer 0.s 00h O 7 00 Multifunction A At B H Ht Di D Ac Bw timer 0.s 00h O 7 0 Multifunction A At B H Ht Di D Ac Bw timer Function diagrams Function A Delay on energisation timers Function iming after impulse timer Function L Asymmetrical recycler Function D Flipflop / Function H iming on energisation Function Li Asymmetrical recycler Pulse start Function Di Flipflop Pulse start Function At iming on energisation with memory t t = tt Function B iming on impulse one shot Function Ht Delay on energisation with memory t t = tt Function Ac iming after closing and opening of control contact Function Bw Pulse output (adjustable) onnections: pin pin relay Dimensions Accessorie 5 Y ,5,5,5 5 5 Functions : A At / H Ht / B / Li A Di D / Ac / BW L : pin connector base 5 o order, specify: H Standard products ype Part number Part number Example: hronos imers O 7 05 pin connector base 5 /
3 hronos electronic timers Plugin pin (5 mm) elay output change over relays Multifunction or monofunction Multirange (7 ranges, available options) Multivoltage elays output : 50 V (0 A L) Plugin LED status indicators Option of connecting an external power supply to the control input wire sensor control option echnical specifications iming epetition accuracy (with constant parameters) Drift emperature Voltage Display precision according to IE Minimum pulse duration ypically (relay version) ypically (solid state version) ypically under load (relay version) Maximum reset time by deenergisation ypically (relay version) ypically (solid state version) Immunity to breaks in supply voltage: typically Power supply Multivoltage power supply Frequency Operating range Load factor Maximum power consumption Output elements relay output or changeover relays, AgNi (cadmiumfree) ated power Maximum breaking current Minimum breaking current Voltage breaking capacity Electrical life Mechanical life Breakdown voltage acc. to IE Impulse voltage acc. to IE IE Display State displayed by LED Flashing green when on Green LED operation indicator Pulsing: timer on, no timing in progress (except functions DiD and LiL) Flashing: timing in progress Permanently lit: elay waiting, no timing in progress Input type Voltfree contact wire PNP output control option maximum residual voltage: 0. V whatever the timer power supply ± 0.5 % (EI ) ± 0.05 % / ± 0. % / V ±0 % / 5 0 ms 50 ms 00 ms 00 ms 50 ms >0 ms depending on version, see page / 50/0 Hz 5 to 0 % n (5 to 0 % n for V A/D) 00 % 0. W V A/D.5 W 0V A VA 0V A 000 VA / 0 W 000 V A / 0W A D 0 ma / 5 VD 50V A/VD 0 5 operations 50V resistive 5 x 0 operations.5 kv / min / ma /50Hz 5 kv, wave. / 50 µs 0. V iming ypes Part numbers and voltage V c / 0V a V a / c 0 V a / c Functions Nominal current Accessorie pin connector base (for the whole range) iming ranges (7 ranges) s 0 s min 0 min h 0 h 00 h General specifications onforming to standards IE, EN 500/, EN 500/, LV directives (7//EE 9//EE (E marking) EM (9//EE IE 9 (7.5 mm) Approvals L SA cl pending emperatures limits use stored Installation category (acc. to IE ) reepage distance and clearance acc. to IE Degree of protection acc. to IE 59 terminal block casing front face (except k) Vibration resistance acc. to IE elative humidity acc. to IE without condensation Electromagnetic compatibility Immunity to electrostatic discharges acc. to IE 000 Immunity to electrostatic fields acc. to ENV 500/0 (IE 000) Immunity to rapid transient bursts acc. to IE 000 Immunity to shock waves on power supply acc. to IE 0005 Immunity to radiofrequency in common mode acc. to ENV Immunity to voltage dips and breaks acc. to IE 000 Mainsborne and radiated emissions acc. to EN 550 (EN 550 Group ) Fixing: plugin bases asing material Weight: plugin casing Voltage surge category kv / IP 0 IP 0 IP 50 f = 0 55 Hz A = 0.5 mm 9 % Level III (Air K / ontact KV) Level III 0V/m: 0 MHz to GHz) Level III (direct kv/ apacitive coupling clamp KV) Level III (common mode KV / residual current mode KV) Level III (0V rms: 0.5 MHz to 0 MHz) 0 % / 0 ms 0 % / 00 ms > 95 % / 5 s lass B pin Selfextinguishing 0 g Other information Non stocked, minimum order quantity 00 units. /
4 0.s 00h P 7 05 Multifunction A At B H Ht Di D Ac Bw timers including instantaneous Function diagrams 0.s 00h PA 7 5 Bifunction A At timers 0.s 00h P 7 5 Monofunction timers 0.s 00h PL 7 55 Bifunction Li L timers 0.s 00h P 7 00 Multifunction A At B H Ht Di D Ac Bw timers including instantaneous 0.s 00h P 7 0 Multifunction A At B H Ht Di D Ac Bw timers including instantaneous Function A Delay on energisation timers or relays, including instantaneous Function iming after impulse timers or relays, including instantaneous Function Ac iming after closing and opening of control contact timers or relays, including instantaneous Function Bw Pulse output (adjustable) timers or relays, including instantaneous / INS / inst. / Inst. Function At iming on energisation with memory timers or relays, including instantaneous Function H iming on energisation timers or relays, including instantaneous Fonction D Flipflop timers or relays, including instantaneous Function L Asymmetrical recycler timers / Inst. t t = tt / Inst. / Inst. / Function B iming on impulse one shot timers or relays, including instantaneous onnections Y / Inst. Function Ht Delay on energisation with memory timers or relays, including instantaneous / Inst. t t = tt Fonction Di Flipflop timers or relays, including instantaneous / Inst. Dimensions 7,5,5,5 5 Function Li Asymmetrical recycler Pulse start timers / Accessorie Functions : A At / H Ht / B / Li Di D / Ac / BW L : 5 o order, specify: pin connector base H Standard products ype Part number Accessorie Example: hronos imers P 7 05 pin connector base /5
5 Functions : Supply (Y) : ontrol contact : Output or load relay : iming : indefinite Function A: Delay on energisation Single timing cycle which begins on energisation. he output changes state after timing. Function B: iming on impulse one shot On pulse (with constant supply) After energisation; a pulse ( 50 ms) or a maintained control contact will cause the output to change state which reverts to the rest position at the end of timing. timed and instantaneous / INS N.B. : this process enables shortening or lengthening of a signal. timed and instantaneous / Inst. Function Ab: Oneshot cycle he output changes states at the end of the set time, for a period. Both and independently adjustable. Function Ac: iming after closing and opening of control contact After energisation, closure of the control contact causes the timing period to commence and output relay (or the load) changes state at the end of this interval. When contact (Y) opens, relay resets after a second timing period.. timed and instantaneous Function Ad :Delay on energisation by switch (not resettable) After powerup, pressing or holding down the switch starts timing. At the end of timing, the output is energised. he output will be reset the next time the switch is pressed or held down. Function Ah : Flashing single cycle by switch (not resettable) After powerup, pressing or holding down the switch starts timing. At the end of timing, the output is energised. At the end of this second timing, the output falls back to its initial value. / Inst. / Inst. Function Bw: Pulse output (adjustable) AOutput relay (or the load) changes state, and remains in the changedover state for the timing period, both when control contact (Y) closes and when it opens. timed and instantaneous Function : iming after impulse Delay OFF (with constant supply After energisation, once the control contact is closed the output state changes. iming will only begin on the reopening of this control contact (one shot). elay returns to its initial position at the end of the timing period. timed and instantaneous Function D or Di: Flipflop epetitive cycle which switches the output alternately between the rest and operating position for equal time bases. = total Function D: the cycle begins with the output in rest position.. timed and instantaneous Function Di: the cycle begins with the output in the operating position. Pulse start. / inst. / Inst. Function At: iming on energisation with memory Provides a cumulative time for contact opening. he output changes states at the end of the set time. timed and instantaneous / Inst. t t t = tt t = tt timed and instantaneous Function H: iming on energisation Interval timer one shot On energisation, the output changes state, remains in that state for the duration of timing and resets at the end of the single cycle. N.B. his is complementary to function A. timed and instantaneous / Inst. / Inst. /0
6 Function Ht : Delay on energisation with memory Provides a cumulative time for contact opening. On energisation, the output changes state, remains in that state for the duration of timing and resets at the end of the single cycle. t t = tt Function P : Delayed fixedlength pulse iming begins on energisation. At the end of the timing period output relay (or the load) changes state for a period of approx. 500 milliseconds. P P = 500 ms timed and instantaneous / Inst. t t = tt Function Pt : Impulse counter (delay on) alculates the total opening time of a contact. At the end of timing, the output is energised for approximately 500 ms. t t P = tt Function K: Delay on deenergisation rue delay OFF On energisation, the output changes state. On deenergisation timing commences and the output only returns to the reset condition after timing. timed and instantaneous Function Q : Stardelta" At the end of timing, the output is not energised. It remains "open" (not conducting) and will only change state after the fixed time of i has elapsed. Dwell time selectable i Function L : yclic timing Asymmetrical recycler epetitive cycle comprising independent adjustable time bases. Each time base corresponds alternately to a different output state. N.B. : he cycle starts with the output in the rest position. timed and instantaneous / Function : iming on energisation with memory a energisation by control signal he timer sums the times for which the control contact is closed (). eset is by the reset signal () only. Function Li : yclic timing Asymmetrical recycler epetitive cycle comprising independent adjustable time bases. Each time base corresponds alternately to a different output state. N.B. : he cycle starts with the output in the operating position. timed and instantaneous / b energisation by supply voltage he timer sums the times for which the supply voltage () is on. eset is by the reset signal () only Function : Impulse relay After powerup, pressing or holding down the switch closes the relay. Pressing the switch a second time opens the relay. Function N : "Safeguard" Function t : imed impulse relay At the first control pulse the output is energised. o complete the timing the interval between the two control pulses must be greater than the timing set. After powerup, pressing or holding down the switch closes the relay and starts timing. he relay opens at the end of timing or when the switch is pressed a second time. t Function W : iming after pulse on control contact Function O : "Delayed safeguard". On energisation, a first timing sequence occurs and the output changes state. With the closing of the control contact, the output resets and the timing starts, with the output being activated after timing. For the timing to be completed, the interval between the closing of two control contacts must be greater than the timing set. After energisation, if the control contact opens it causes output relay (or the load) to change state and timing to start. At the end of the timing period, relay resets to its original state. /
Chronos 2 electronic timers mm
hronos electronic timers.5 mm elay output DDP relay Multifunction or monofunction Multirange (7 ranges, available options) Multivoltage Output : 50 V ( L) Screw or spring terminals LED status indicators
More information17.5mm Chronos 2 Timers
7.5mm hronos imers rouzet Products /Automation ontrols /Electronic imers /7.5mm hronos imers POD FEAES Multifunction or monofunction Multirange (7 ranges, available options) SPD relay output: 0A 50V on
More information02/11/2015
35 mm - 1 Relay 8A OUR3 Part number 88867103 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More information02/11/2015
35 mm - 2 Relays 8A PL2R1 Part number 88867455 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More information22/10/2012
22.5 mm DIN rail mounting TUR1 Part number 88865105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator Option of connecting an external power supply
More information02/11/2015
DIN Rail Mount 17.5 mm MXR1 Part number 88826185 Just one digit differentiates the new range part number from the old range's Previous part number : 88 826 XXX / new part number : 88 827 XXX Part numbers
More information02/11/2015
DIN Rail Mount 17.5 mm MURc3 Part number 88826503 DIN Rail Mount 17.5 mm MURc3 Part number 88826503 Just one digit differentiates the new range part number from the old range's Previous part number : 88
More information08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
More information24/07/2012
17.5 mm DIN rail mounting MURc3 Part number 88826503 Relay or solid state output Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version)
More information08/07/2015
17.5 mm - 1 Relay 8A MUR1 Part number 88827105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external load connection
More information11/03/2013
17.5 mm DIN rail mounting MUR1 Part number 88826105 TO BE SOON REPLACED BY THE NEW CHRONOS 2 RANGE (ref. 88827...) Relay or solid state output Multi-function or mono-function Multi-range Multi-voltage
More informationRE11RMMU time delay relay 10 functions - 1 s..100 h V AC - 1 OC
Product data sheet Characteristics RE11RMMU time delay relay 10 functions - 1 s..100 h - 24..240 V AC - 1 OC Complementary Contacts material Width pitch dimension Control type Voltage range Connections
More informationPART NUMBERING SYSTEM
Plug-In Timer 11 pins Multifunction or monofunction Compact body for space saving Wide time range (from 0.5 seconds to 10 days delay) Universal power supply (12-240 Vz) 1 or 2 relay outputs (SPDT / Changeover)
More information05/09/2012
17.5 mm EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer ON LED) Option
More informationPART NUMBERING SYSTEM
Plug-In Timer pins Multifunction or monofunction Compact body for space saving Wide time range (from 0. seconds to 0 days delay) niversal power supply (-0 Vz) or relay outputs (SPDT / Changeover) Protective
More information02/11/2015
17.5 mm - 1 Relay 5A EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Product availability : Stock - Normally stocked in distribution facility Price* : 75.00 USD Main Range of product Product
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay
More informationRE22R2MMU Multifunction Timer Relay - 24VDC/ V AC - 2 C/O
Product data sheet Characteristics RE22R2MMU Multifunction Timer Relay - 24VDC/24..240 V AC - 2 C/O Main Range of product Product or component type Discrete output type Device short name Nominal output
More informationRE17RMMU time delay relay 10 functions - 1 s..100 h V AC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 24..240 V AC - 1 OC Product availability : Stock - Normally stocked in distribution facility Price* : 62.00 USD Main Range of product Product
More informationRENF22R2MMW Zelio Timer Relay - Modular
Characteristics Zelio Timer Relay - Modular Main Range of product Product or component type Device short name Operating system Software version Software designation Complementary Discrete output type Nominal
More informationRE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal
More informationRE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Complementary Contacts material Control type [Us] rated supply voltage Voltage range Main Range of product Product or component
More informationMulti-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
More informationRE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Product availability : Stock - Normally stocked in distribution facility Price* : 42.90 USD Main Range of product Product or component
More informationRE17RCMU off-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics off-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal
More information87 Series - Modular timers 5-8 A. Features
87 eries - Modular timers 5-8 A Features 87.01 87.02 Mono-function and multi-function timer range mm wide 87.01-1 Pole - Multi-function and multi-voltage 87.02-2 Pole - Multi-function and multi-voltage,
More informationRE48AML12MW time delay relay 2 functions s..300 h V AC - 2 OC
Characteristics time delay relay 2 functions - 0.02 s..300 h - 24..240 V AC - 2 OC Product availability : Stock - Normally stocked in distribution facility Price* : 86.00 USD Main Range of product Product
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 eries - lug-in timers 5-8 A Features 88.02 88.12 Multi-voltage and multi-function timer range Front panel or socket mount 8-11 pin plug-in version available ime scales from 0.05s to 100h 1 delayed contact
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 88 Multi-voltage and multi-function timer range Front panel or socket mount 8 and 11 pin plug-in versions available Time scales from 0.05 s to 100 h 1 delayed contact +1 instantaneous contact version
More informationRE17LLBM asymmetrical flashing relay s V AC - solid state output
Characteristics asymmetrical flashing relay - 0.1..1 s - 24..240 V AC - solid state output Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 75.00 USD Main Range
More informationMulti-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi
Features Special relay for alternating loads, for applications with pumps, compressors, air conditioning or refrigeration units 2 independent NO output, 12 A 4 functions 2 independent control signals,
More informationZelio Time - Timing Relays NFC Timing Relay
Presentation Zelio ime - iming Relays NFC iming Relay Presentation he Zelio ime range offers simple-to-use innovative NFC timing relay which is enabled and controlled by the Near Field Communication technology
More informationType Nominal voltage (V) Code HSV V
Speed control Speed control relay - mm Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - -wire PNP or NPN, Namur, voltage 0-0V or volt-free contact type Works
More information83 Series - Modular timers 16 A. Features
Features 83 Series - Modular timers 16 A 83.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 83.11 - delay, multi-voltage 22.5 mm wide Six time scales from 0.1s to 20h High
More information83 SERIES. 83 Series - Modular timers A. Features
Features 83 Series - Modular timers 12-16 A 83.01 83.02 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous
More informationMulti-voltage Multi-function. BE: Off-delay with control signal BE: Off-delay with control signal CE: On- and off-delay with control signal
83 Modular timers 12-16 A 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous options), external time setting
More information87 Series Modular Timers 5-8 A
Modular imers 5-8 A A range of modular timers 5-8 A Features include: One module (22.5 mm) wide Monofunction and multifunction versions available ime scales from 0.05s to 60h 1 delayed contact + 1 instantaneous
More informationOvercurrent Protection / 7SJ45
Overcurrent Protection / SJ SIPROTEC easy SJ numerical overcurrent protection relay powered by CTs Fig. / Description SIPROTEC easy SJ numerical overcurrent protection relay powered by current transformers
More informationSolid-state Timer H3DS
Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationTime relay RXKA 1. (xx jpg) RXKA 1
Time relay RXKA 1 (xx02000674.jpg) RXKA 1 Features For protection, control, signal and industrial applications On-delay and Off-delay functions Continuous and pulse output functions Setting range 0.1-320
More informationMasterINTERFACE 39 Series - Relay interface modules
Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)
More informationModular timers A
Modular timers 1-6 - 8-16 A Building automation Elevators and lifts 80 SЕRIES Automation for blinds, grilles and shutters oists and cranes Panels for electrical distribution Door and gate openers FINDER
More informationContents H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A. Solid-state Timer. Common to ALL Timers
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2 for Low Voltage, and EMC Directives. Approved by UL and CSA. Lloyds/NK approvals.
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationRE22R2MYMR Multi-function Timing Relay s 300h V AC/DC - 2C/O
Product datasheet Characteristics RE22R2MYMR Multi-function Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal
More informationSolid-state Timer H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2. Conforms to EMC standards (EN50081-2 and EN50082-2). Approved by UL and CSA. Lloyds/NK
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More informationPhase control Single function phase control relay - 7.5 mm Control of -phase networks: phase sequence, total phase failure Multi-voltage from x 08 to x 480 V Controls its own supply voltage True RMS measurement
More information02/11/2015
Emergency stop and safety guard monitoring 1 channel KNAC3-YS Part number 85103035 "Emergency stop" & "Gate monitoring" functions Single channel operation Security with redundancy and feedback circuit
More information38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationNPRG860 & NPRG870 perform synchronization and paralleling of generators with electrical network. NPRG860 features a speed adjustment function.
REGULATION AUTOMATIC SYNCHRONIZER for GENERATOR NPRG860 & NPRG870 perform synchronization and paralleling of generators with electrical network. NPRG860 features a speed adjustment function. NPRG870 adds
More informationSMARTimer, digital timer 16 A
SMARTimer, digital timer 16 A Timers and lighting controls Automatic car-washes 84 SЕRIES Labelling machines Punches, cleaners, planers and sanders Industrial furnaces and ovens Discotheques, swimming
More information02/11/2015
Emergency stop and safety guard monitoring 2 channels KNE3-YS Part number 85102436 "Emergency stop" & "Safety gates monitoring" functions Single and 2-channel operation Security with redundancy and feedback
More information02/11/2015
Standstill monitoring KSW3-JS Part number 85102331 Function "Stillstand detection without sensors" Independent of rotation direction Security with redundancy and feedback circuit 3 forcibly guided "NO"
More informationElectronic timers CT-S range Selection and ordering details
CT-S range Selection and ordering details Characteristics CT-S range CT-MFS 1SVR 430 010 F 0200 3 multifunction and 21 multi-range Continuous supply voltage range (24-240VAC/DC) or multisupply voltage
More informationTiming Mode Supply Voltage Trigger Options Reset Options Outputs Cat. No V AC Power On Power Off. Repeat Cycle OFF-Start
Bulletin -HR Plug-in iming Relays Product election/catalog Number Explanation Bulletin ON-Delay iming Relays ocket or Panel Mounted iming Range From. s h -pin base for socket cat. nos. -HN, -HN, -HN rigger:
More informationNPRG860 NPRG870 REGULATION. Automatic Synchronizer for Generator
REGULATION Automatic Synchronizer for Generator NPRG860 & NPRG870 perform synchronization and paralleling of generators with electrical network. NPRG860 features a speed adjustment function. NPRG870 adds
More informationRE22R2MYMR Multi-function Timing Relay s 300h V AC/DC - 2C/O
Characteristics Multi-function Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Product availability : Stock - Normally stocked in distribution facility Price* : 79.16 USD Main Range of product Product
More information27/04/2015
Modular Carril DIN 35 mm HIL Part number 84871120 Control of AC and DC currents Automatic recognition of AC/DC Measurement ranges from 2 ma to 10 A Choice between over and undercurrent True RMS measurement
More informationProgrammable Digital Timer
Programmable Digital imer Digital 7-egment display upply Voltage range of 110-240 VAC Input ignal ensing range of 85-265 VAC/100-265 VDC & 20-60 VAC/DC Inbuilt library of 33 functions covering majority
More informationRS Pro ENGLISH. Datasheet
Datasheet Article No: 136-5385 Digital AC Ammeter, 48x96, 1Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5387 Digital AC Ammeter, 96x96, 1Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5388 Digital
More informationXUA1 AC Voltage and phase balance relay. (August 1996) Manual XUA1 (Revision New)
XUA1 AC Voltage and phase balance relay (August 1996) Manual XUA1 (Revision New) Woodward Manual XUA1 GB Woodward Governor Company reserves the right to update any portion of this publication at any time.
More informationSIPROTEC easy 7SJ46 Numerical Overcurrent Protection Relay
Overcurrent Protection / 7SJ46 SIPROTEC easy 7SJ46 Numerical Overcurrent Protection Relay Function overview Fig. /11 Description The SIPROTEC easy 7SJ46 is a numerical overcurrent protection relay which
More information05/09/2014
48 x 48 Digital LCD Timer 814 Part number 88857005 Relay output digital timers LCD or LED (815E) Multi-range Multi-voltage 1 or 2 relay outputs Reset function on panel (Timers 815, 815E) Data saved in
More informationHigh-set undervoltage stage with definitetime. or inverse definite minimum time (IDMT) characteristic. Low-set undervoltage stage with definitetime
Issued: 5.06.999 Status: 5.06.999 Version: B/09..00 Data subject to change without notice Features Overvoltage and undervoltage protection Single- or three-phase operation High-set overvoltage stage with
More informationC series Product brief
Product brief Key applications Landlord sub-metering Object metering Meter performance Direct connected up to 0 ctive energy Low power consumption larm function Pulse output Installation Small size - 1
More informationXUA1 - AC Voltage and phase balance relay
XUA1 - AC Voltage and phase balance relay Contents 1. Applications and features 2. Design 3. Function 3.1 Voltage supervision 3.2 Unbalanced voltage supervision 4. Operation and settings 4.1 Setting of
More informationRE7MY13MW time delay relay 8 functions s V AC DC - 2OC
Characteristics time delay relay 8 functions - 0.05..1 s - 240 V AC DC - 2OC Main Range of product Product or component type Contacts type and composition Component name Time delay type Time delay range
More informationApplication Alpha 20 Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel meters
Technical Data Sheet Alpha 20 Alpha 20 is a compact multifunction instrument which Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel
More informationCount - counters 5. Selection guide 5 XBK T81030U33E RC XBK RC XBK T60000U00M XBK T60000U11M XBK T80000U00M XBK T70000U00M 5/2
Selection guide Count - counters Function Totalising counters Display type Mechanical LCD Font panel dimensions (h x w) in mm 0 x 0 x. 0 x 60 x Number of display digits 6 digits or 6 digits (depending
More informationRISH EM 3490 SS Kilowatt Hour Energy Meter With Rs485 RISH EM 3490 SS. Application : Product Features: Indication: Pulse Indication:
Application : RISH Master 3490 SS is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy having auto-resetting 8 digit seven segment LED counter. The unit
More informationBulletin 700-HX Multifunction Digital Timing Relay
Bulletin 700-HX Multifunction Digital Timing Relay Model Operating Mode Timing Range Socket Type Contact Output No. of Pins Input Voltage Cat. No. Cat. No. 700 HX A mode: Signal ON-Delay 1 A-1 mode: Signal
More informationAMIK 200 / 201 Technical Data Sheet
AMIK 200 / 201 Technical Data Sheet AMIK Special Features MODBUS (RS-485) Communication available only on Amik 201 On site Programmable CT/PT Ratios User selectable CT Secondary 1A/5A User selectable PT
More informationSensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable
Features 72.01 72.11 Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator Reinforced insulation (6 kv - 1.2/50
More informationRE7RL13BU off-delay timing relay with control contact s - 24 V AC DC - 2OC
Characteristics off-delay timing relay with control contact - 0.05..1 s - 24 V AC DC - 2OC Product availability : Stock - Normally stocked in distribution facility Price* : 189.00 USD Main Range of product
More informationRS Pro ENGLISH. Datasheet
Datasheet ENGLISH Article No: 136-5390 Digital AC Ammeter, 48x96, 3Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5391 Digital AC Ammeter, 96x96, 3Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5393
More informationZelio Time - timing relays
Presentation Zelio ime - timing relays DIN rail mounted relays Presentation A timing relay is a component which is designed to time events in industrial automation systems by closing or opening contacts
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationDATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC
DATASHEET - ETR4-51-A Timing relay, star-delta, 50 ms, 1W, 3-60s, 24-240VAC/DC Part no. ETR4-51-A Catalog No. 031884 Eaton Catalog No. XTTR6A60S51B EL-Nummer 0004133308 (Norway) Delivery program Product
More informationAnalog signal converters CC-E I/I
2CC 281 001 F0b06 Features Loop-powered I/I isolator without external power supply for analog current signals of 0-20 ma and 4-20 ma Electrical isolation between input and output Very low internal voltage
More informationALPHA 20 MULTIFUNCTION METER (ALPHA SERIES)
Alpha Series www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters Shunts ALPHA
More informationElectronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact The CT-EBE is an electronic time relay with the function flasher starting with OFF. It is from the CT-E range. The CT-E
More informationModel Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models
Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model
More informationMulti Function Timer with Free power, Compact size W38 H42mm
Multi Function with Free power, ompact size W8 H4mm Features Wide power supply range : 100-40VA 50/0Hz, 4-40VD (universal), 4VA 50/0Hz / 4VD (universal), 1VD Various output operations( operation modes)
More informationRISH Delta Energy / Demand (Multifunction instrument) Data Sheet
ISH Delta Energy / Demand (Multifunction instrument) Data Sheet www.rishabh.co.in Page 1 of 6 Version: D 14 / 03 / 2012 Application: ISH Delta Energy measures important electrical parameters in 3 phase
More informationAMIK Three Phase Digital Panel Meters
AMIK Three Phase Digital Panel Meters USA SICE 1936 ELIAILIT EOD MEASUE Special Features 3 Line 4 Digits ultra bright LED Display (up to 9999) On site Programmable CT/PT atios User selectable CT Secondary
More information02/11/2015
Two-hand safety relays KZH3-YS Part number 85102632 "Two-hand" safety function in with two push buttons Inputs for two switches with double contacts (1 NO and 1 NC for each) Security with redundancy and
More informationEnergy Management Three-phase energy meter with output modules Type EM4-DIN
Energy Management Three-phase energy meter with output modules Type EM4-DIN Class 1 (active energy) Class 2 (reactive energy) Three-phase multi-function energy meter Back-lighted LCD display 3 1 / 2 DGT
More informationElectronic timer CT-MFS.21
2CDC 251 053 F0t07 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c Rotary switch for the preselection of the
More informationCOMPACT SIZE HIGH PRECISION TIMERS VARIOUS OUTPUT & OPERATION MODE TYPES. UL File No.: E CSA File No.: LR39291
COMP SIZE HIGH PRECISI IMERS VARIOUS OUPU & OPERAI MODE YPES SDX (one) SDX imers Features UL File No.: E22222 CSA File No.: LR3929 3 operation modes added for fuller lineup Now, operation modes include
More informationMeasuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
More informationJewell DPM EINE BEST IN CLASS
Application: Silent Features: The digital panel meter has been designed Fast & Easy installation on panel with the for industrial applications, which help of external swivel screws. frequently require
More informationSolid-state Timer H3DE
Solid-state Timer H3DE DIN-rail Mounted, Standard 22.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/DC) reduces the number of timer models kept in stock. (except for H3DE-H) 12-VDC
More informationCurrent monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationPD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description
Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer
More informationON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Solid-state Timer CSM DS_E_
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays rue RMS 3-Phase, 3-Phase+, Multifunction ypes DPC01, PPC01 DPC01 Product Description 3-phase or 3-phase+neutral line voltage monitoring relay for phase sequence, phase loss, asymmetry,
More information