HANWELL UTILITY DATA SHEET

Transcription

1 HANWELL UTILITY DATA SHEET

2 HANWELL UTILITY The Hanwell utility range is an innovative monitoring system that measures and records utility usage over time and allows statistical analysis of kilowatts/hrs, cubic meters of gas and liters of water consumed. It can quickly identify and eliminate areas of waste, resulting in significant savings within weeks of installation. The reported data can then be used to provide logged records as evidence of sustained usage reduction over time. Hanwell utility transmitters can be added to existing Hanwell environmental monitoring systems providing a cost-effective solution to utility monitoring. Utility sensors can be deployed across a site with minimal disruption. There is no need to disconnect electrical supplies as utility devices use split core current clamps to monitor electrical circuits. Product Features Data logger, radio and GPRS transmitter formats available High performance technology Logger memory capacity 100,000 readings Easily accessible battery and USB socket Supports (optional) hidden wall brackets Up to 5 years battery life (depending on format of data retrieval) Low power radio for long distance transmission (Over 3km over open ground) Complies with RoHS, EU directives and WEEE Carries CE Mark Benefits Easy installation without any interference with mains Reduces energy costs Reduces carbon footprint Wireless communication for cost effective install Detailed analysis of usage and costs Compatible with existing Hanwell systems Data Logger Functions Memory: 256k EEPROM Logging intervals: programmable from 10 seconds to 24 hours. Record Capacity: 100,000 records Interface: USB communications Battery Life: Up to 3 years Software required: W200 HanLog 4.5+ Accessories: V AA Lithium battery Y055 USB cable Y119 Wall mount bracket Radio Transmitter Functions Frequency Options: A range of frequencies are available between MHz. Country specific regulations apply. Radio Power: 10mW Radio Range: 3km over open ground Battery Life: Up to 18 months Software required: W400 RadioLog 8.4+ W500 RadioLog 8.4+ Validated software for: Industrial, Food, Pharma & Hospital Hardware required: CR2 Controller Smart Receiver REP Repeater Accessories: V AA Lithium battery Y119 Wall mounting bracket This product can be calibrated to your specifications, contact us for further details. GSM Quad band module GSM antenna connection is SMA. Knuckle antenna provided. SIM card required. The SIM socket is only visible when the case lid is removed. Both units operate from 2 x Alkaline D cell battery pack. Battery pack can be purchased from Hanwell and fitted by customer. Battery life is up to 5 years (one SMS a day i.e. 30 minute measurement period and no events enabled). Format Data Logger Radio Transmitter GPRS Disclaimer The information contained herein is believed to be reliable. The IMC Group Ltd is not responsible for any incorrect or incomplete information on this datasheet and the information or product may be changed without notice. Customers should obtain and verify the latest relevant information before placing orders for IMC products. Issue: 1 1

3 In Building monitoring Clamps The Hanwell data logger and radio transmitters allow for wire-free internal monitoring of a site, with real time alarm notifications and historical analysis of data. Each unit measures the output of current clamps providing fast and reliable information about energy usage and cost. The data is transmitted automatically, at user-defined intervals, to the RadioLog system where it is filed for analysis. *Switchable split core CT sensor Ranges: 0-30A, 0-60A and 0-120A. (Max cable diameter 22mm) *A single range split core CT sensor 5A. (Max cable diameter 10mm) *A single range split core CT sensor 50A. (Max cable diameter 10mm) *A single range split core CT sensor 100A. (Max cable diameter 10mm) Standalone data logger Y060 cable Y060 cable 3 single phases or 1 x 3 phase supply HL single phases or 1 x 3 phase supply RL4601 Description 4000 series CT clamp unit for 3 single phases or 1 x 3 phase supply. Includes Y060 3 phase cable and optional frequency series CT clamp unit for 3 single phases or 1 x 3 phase supply. Includes Y060 3 phase cable and optional frequency series CT clamp unit for 3 phases or 1 x 3 phase supply. Includes Y060 3 phase cable and optional frequency. Data Logger code HL4601-MRC HL A HL A HL A Radio Transmitter code RL4601-MRC (other frequencies RL A (other frequencies RL A (other frequencies 4000 series CT clamp unit for 3 single phases or 1 x 3 phase supply. Includes Y060 3 phase cable and optional frequency. RL A (other frequencies Clamp This unit is for use with J091 clamp. This unit is for use with J134 clamp. This unit is for use with J135 clamp. This unit is for use with J139 clamp. Product code: HL4601* (data logger) RL4601* (radio transmitter) Dimensions: 110 x 80 x 35 mm Weight: 200 grams Power Supply: 3.6 volt AA Lithium battery Battery Life: 18 months Case Materials: ABS & Issue: 1 2

4 In Building monitoring Pulse Counting The Hanwell pulse counting radio and GSM/GPRS transmitters provide wire-free monitoring of a site. The units can be used to collect data from electricity, water and gas meter outputs (an isolation device many be required for gas meters) and energy meters with a suitable pulse output providing accurate and reliable information about utility usage and cost. This data is transmitted, at user-defined intervals, to the RadioLog software where it is filed for analysis. Alternatively the data can be sent to an FTP site for collection by third party software packages. The sensor cable entry into the case is via a cable gland and terminated into a terminal block allowing for ease of installation and making the unit suitable for use outdoors (IP67 rated case for harsh environments). Electricity Gas Water GSM/GPRS transmission Electricity Gas Single channel pulse counter Single channel pulse counter and sync Dual channel pulse counter Dual channel pulse counter and sync Radio Transmitter code RL (other frequencies RL (other frequencies RL (other frequencies RL (other frequencies GSM/GPRS Transmitter code RL4605 RL4607 RL4609 RL4611 Type Volt free contacts or opto isolated Volt free contacts or opto isolated Volt free contacts or opto isolated Volt free contacts or opto isolated Input details Water DHCP IP address (GPRS) Cloud Any IP Address Hanwell Hosted Services Hanwell Hanwell Data Routing Service Pulse Frequency Maximum 15Hz Maximum 15Hz Maximum 15Hz Maximum 15Hz Pulse Mark/space Minimum 25msec Minimum 25msec Minimum 25msec Minimum 25msec Wetting current Between 1 to 2mA into a maximum impedance of 10 ohms Between 1 to 2mA into a maximum impedance of 10 ohms Between 1 to 2mA into a maximum impedance of 10 ohms Between 1 to 2mA into a maximum impedance of 10 ohms Total pulse counts Yes Yes Yes Yes Maximum Total count (30 bits) (30 bits) (30 bits) (30 bits) Difference Over Period Yes Yes Yes Yes Maximum Difference (16 bits) (16 bits) (16 bits) (16 bits) Period 30 minutes (adjustable) 30 minutes (adjustable) 30 minutes (adjustable) 30 minutes (adjustable) Period Sync???? Error ±1 count ±1 count ±1 count ±1 count Client Client Site Dimensions: 110 x 100 x 60 mm Weight: 600 grams (including battery pack) Power Supply: 2 x Alkaline D cell batteries Battery Life: 5 years (depending on usage and configuration) Case Materials: ABS & Issue: 1 3

5 In Building monitoring Rogowski Coils The advanced range of rugged GSM/GPRS and Radio transmitters can be used with Rogowski coils providing fast and reliable information about energy usage and cost. The data is transmitted automatically, to the RadioLog system where it is filed for analysis. The Rogowski coils have been designed to be a non-intrusive, non-disruptive method to energy monitoring. 3 channel Rogowski coil GSM/GPRS transmitter up to 800 amps as standard. Electricity Gas Water GSM/GPRS transmission Hanwell Hosted Services Hanwell Hanwell Data Routing Service Client Client Site RL4236 Radio Transmitter code GSM Transmitter code DHCP IP address (GPRS) 4000 series transmitter with 3 channel Rogowski coil. Up to 800amps RL (other frequencies RL4624 Cloud Any IP Address Dimensions: 110 x 100 x 60 mm Weight: 600 grams (including battery pack) Power Supply: 2 x Alkaline D cell batteries Battery Life: 5 years (depending on usage and configuration) Case Materials: ABS & Issue: 1 4

6 Outdoor/Remote monitoring Clamps The Hanwell radio transmitter for external enclosures are part of the advanced radio range, allowing wire-free monitoring of a site, with real time alarm notification and historical analysis of data. Each unit measures the output of current clamps providing fast and reliable information about energy usage and cost. The data is transmitted automatically, at user-defined intervals, to the RadioLog software where it is filed for analysis. The GSM/GPRS ranges of products are truly standalone making them suitable for use in the most remote locations. The only limitation is the GSM/ GPRS signal availability. Should any problem with network connectivity be detected the GSM/GPRS module will automatically re-set and re-connect to the network avoiding costly trips to manually reset the unit. The set-up is done via SMS messages allowing easy installation on site. Some setup is done via the internal USB interface (which can be prior to installation) using the simple setup program, which is supplied free. SIM card required. Y060 cable *(Left) Switchable split core CT sensor Ranges: 0-30A, 0-60A and 0-120A. (Max cable diameter 22mm) *(Left-middle) A single range split core CT sensor 5A. (Max cable diameter 10mm) (Right-middle) A single range split core CT sensor 50A. (Max cable diameter 10mm) *(Right) A single range split core CT sensor 100A. (Max cable diameter 10mm) 3 single phases or 1 x 3 phase supply RL4602 GSM transmission Hanwell Hosted Services Hanwell Hanwell Data Routing Service Client Client Site RL4236 DHCP IP address (GPRS) Cloud Any IP Address Description Radio Transmitter code Switchable split core CT sensor, Ranges: 0-30A, 0-60A and 0-120A. RL4602-MRC (other frequencies A single range split core CT sensor 5A. RL A (other frequencies A single range split core CT sensor 50A. RL A (other frequencies GSM Transmitter code RL4603-MRC RL A RL A RL A A single range split core CT sensor 100A. RL A (other frequencies Clamp This unit is for use with J091 clamp. This unit is for use with J135 clamp. This unit is for use with J134 clamp. This unit is for use with J139 clamp. Dimensions: 110 x 100 x 60 mm Weight: 600 grams (including battery pack) Power Supply: 2 x Alkaline D cell batteries Battery Life: 5 years (depending on usage and configuration) Case Materials: ABS & Issue: 1 5