General Specifications
|
|
- Mervin Cox
- 5 years ago
- Views:
Transcription
1 General Specifications GS J0X-0E Model MXT Universal Computing Unit (-input, Isolated -output Type) General This plug-in type universal computing unit receives DC current or DC voltage signals, applies various computing functions to them, and then converts them into isolated DC current or DC voltage signals. The optional Parameter Setting Tool (VJ) or Handy Terminal (JHT00) can be used for the setting changes of various parameters such as computing functions or input/output ranges, the setting changes of programs, and the test outputs. The operation indicating lamp shows the operation status, abnormalities in a setting etc. Without a setting tool such as Handy Terminal etc., outputs can be adjusted using the switches on the front panel. Model and Suffix Codes MXT- N - *B/ Model Function : Free program R: Temperature-pressure S: ddition/subtraction T: Multiplication/Division U: Square root extraction V: High selector W: Low selector Input signal : 0 to 0 m DC Span is m or more : 0 to +0 V DC Span is 0. V or more signal : 0 to 0 m DC Span is m or more B: 0 to m DC Span is m or more : 0 to 0 V DC Span is 0. V or more : 0 to 00 mv DC Span is 0 mv or more : 0 to +0 V DC Span is 0. V or more : 00 to +00 mv DC Span is 0 mv or more Power supply : -0 V DC (Operating range: to 8 V DC) : 00-0 V C (Operating range: 8 to V C) Ordering Information Specify the following when ordering. Model and suffix codes: e.g. MXT-N-*B Input range: e.g. to 0 m DC range: e.g. to V DC If the constants for each computing function are specified with the order, the specified values will be assigned before shipment. (Refer to Functions. ) Input/ Specifications Input signal: points of DC current or DC voltage signals (However, points of signals must have the same input range.) Input setting range: Input signal suffix code Setting range 0 to 0 m DC Span is m or more* ±0 V DC Span is 0. V or more *: Setting range is 0 to m DC for the optional specification /R0. Input resistance: Current signal: 00 Ω (external receiving resistor) 0 Ω for the optional specification /R0 Voltage signal: MΩ (800 kω during power off) Permissible applicable input: Current input: 0 m DC or less for input resistance of 00 Ω 0 m DC or less for input resistance of 0 Ω Voltage input: ± V DC or less Optional specification /R0: With 0 Ω receiving resistor GS J0X-0E Copyright Jul. 00 (YK) nd Edition Nov. 00 (YK)
2 signal: point of DC current or DC voltage signal nalog output setting range: signal suffix code B Setting range 0 to 0 m DC Span is m or more 0 to m DC Span is m or more 0 to 0 V DC Span is 0. V or more 0 to 00 mv DC Span is 0 mv or more ±0 V DC Span is 0. V or more ±00 mv DC Span is 0 mv or more nalog output permissible load resistance: range 0 to 0 m DC 0 to m DC 0 to V DC 0 to 0 V DC 0 to 00 mv DC 0 to +0 V DC 00 to +00 mv DC Permissible load resistance 0 Ω or less 000 Ω or less kω or more 0 kω or more (when 00% output exceeds V) 0 kω or more 0 kω or more 0 kω or more Input adjustment range: ±% of span or more (zero/span adjustments) adjustment range: ±% of span or more (zero/span adjustments) Standard Performance ccuracy rating: ±0.% of span However, the accuracy is not guaranteed for output levels less than 0.% of the span of a 0 to X m output range type. The accuracy is limited according to the input/output range settings. ccuracy Calculation ccuracy = Input accuracy + accuracy (%) ccuracy is obtained by totalizing the expression () for input accuracy and the expression () for output accuracy. However, ±0.0% is applied if a value obtained from the expression () or () is less than ±0.0%. For current input, add the error of receiving resistor ±0.% to the input accuracy. Input accuracy = ±0.0% a/b expression () Input signal suffix code Input range (Range converted into voltage) Outside of ±. V DC and within ±0 V DC ±. V DC ccuracy calculation condition a (V) (V) b Input span (Span converted into voltage) Note: When input signal is current, the values converted into voltage by the receiving resistor are applied to the input range and input span. accuracy = ±0.0% a/b expression () signal suffix code B range 0 to 0 m DC 0 to m DC 0 to. V DC Outside of 0 to. V DC and within 0 to 0 V DC 0 to mv DC Outside of 0 to mv DC and within 0 to00 mv DC ±. V DC Outside of ±. V DC and within ±0 V DC ± mv DC Outside of ± mv DC and within ±00 mv DC 0 (m). (m) (V) (V) 0 (mv) 0 (mv) (V) (V) 0(mV) 0 (mv) span ccuracy calculation condition [Example of accuracy calculation] Input range: 0 to 0 m DC Receiving resistor: 0 Ω (0 to V DC when converted into voltage) range: 0 to 0 mv DC Input accuracy = ±0.0% = ±0.0% ±0.0% ( since it is less than ±0.0%) dd ±0.% (error of receiving resistor) to the above. Then, Input accuracy = ±0.% accuracy = ±0.0% 0 0 = ±0.% Therefore, ccuracy = ±0.% Computation cycle: 00 ms (For the function suffix code, selectable from 0 ms, 00 ms and 00 ms.) Response speed: 00 ms, % response (0 to 90%) Effect of power supply voltage fluctuations: Equal to or less than whichever is greater, ±0.% of span or accuracy for the fluctuation within the operating range of each power supply voltage specification. Effect of ambient temperature change: ±0.% of span or less for a temperature change of 0 C. a b ll Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J0X-0E nd Edition Nov. 0, 00-00
3 Power Supply and Isolation Power supply rated voltage: -0 V DC or 00-0 V C 0/0 Hz Power supply input voltage: -0 V DC (±0%) or 00-0 V C (, +0%) 0/0 Hz Power consumption: V DC.9 W 00 V C. V, 00 V C. V Insulation resistance: 00 MΩ or more at 00 V DC between input, output, power supply, and grounding terminals mutually. (Each input terminal is not isolated mutually.) Withstand voltage: 000 V C for minute between input, output, power supply and grounding terminals mutually. Environmental Conditions Operating temperature range: 0 to 0 C Operating humidity range: to 90% RH (no condensation) Operating conditions: void installation in such environments as corrosive gas like sulfide hydrogen, dust, sea breeze and direct sunlight. Installation altitude: 000 m or less above sea level. Mounting and Dimensions Material: Main unit : BS resin (black), UL9 V-0 BS resin + polycarbonate resin (black), UL9 V-0 PBT resin, including glass fiber (black), UL9 V-0 Socket: Modified polyphenylene oxide resin, including glass fiber (black), UL9 V- Mounting: Wall or DIN rail mounting (When mounting the units close together, leave a space of at least mm between them.) Connection: M. screw terminals External dimensions: 8. (H) (W) (D) mm Weight: (including a socket) Main unit: approx. 00 g Socket: approx. 80 g ccessories Spacer: One (for DIN rail mounting) Range label: One Receiving resistor: Three (for current input) * When the optional specification /R0 is specified, the 0 Ω receiving resistor is attached. When the optional specification /R0 is not specified, the 00 Ω receiving resistor is attached. Front Panel can be adjusted using the selection switch and adjustment switch. Connector for communication Selection switch djustment switch Position of selection switch 0 Operation indicating lamp: Turns on at power on. Item to be adjusted zero adjustment span adjustment Terminal ssignments OUTPUT OUTPUT INPUT INPUT INPUT INPUT SUPPLY SUPPLY GND INPUT INPUT (L) (N) (GND) ll Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J0X-0E nd Edition Nov. 0, 00-00
4 Block Diagram Operation indicating lamp Handy Terminal or PC Input Input Input R R 0 R Low drift input processing circuit Micro-processor Computation I/O adjustments Insulation circuit circuit circuit Power supply circuit 8 9 L Power supply N GND Selection switch djustment switch R: External resister for current input External Dimensions Unit : mm Main unit Socket Receiving resistor* (for current input) (8.) Main unit fixing stopper (upper, lower) -. mounting holes (depth:.) 0 RES * () (.) 8 8 DIN rail -M. screws RES *.8 () (.) or less *: The receiving resistor is supplied for the input signal suffix code "" <Mounting Dimensions> or more or more -. or -M Note: When mounting the units close together, leave a space of at least mm between them. Use the supplied spacer to keep a space of mm for DIN rail mounting. 00. ll Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J0X-0E nd Edition Nov. 0, 00-00
5 Functions MXT- Free Program This computing unit is used to meet individual applications by programming the available commands. Initial Setting Program: s the value that corresponds to the input. MXT-R Temperature-Pressure Compensation This computing unit performs temperature-pressure of gas flow measured by differential pressure flow meter (Orifice, Bentury, Flow nozzle, etc.) using the following expressions (select either one). For temperature-pressure of gas flow measured by eddy current meter, use the MXT-T. With square root extraction or without square root extraction can be set for uncompensated flow input signal. If with square root extraction is selected for uncompensated flow input signal, it is shipped with the low-cut point of % and the hysteresis of 0.%. K X+ Y= K X () [with extraction of K X+ flow input signal] K X+ Y= () [without extraction K X+ K X of flow input signal] where Y (): Compensated flow output signal (%) X (Input-): Uncompensated flow input signal (%) X (Input-): Pressure input signal (%) X (Input-): Temperature input signal (%) K to K: Gain (no unit) and : Bias (%) Settings of gain and bias <For temperature-pressure > How to obtain K, K,, K, and : <For either temperature or pressure > When only the temperature is performed: Make for the pressure. That is, set K = 0, = 00% and use the expressions (d) and (e) to obtain other gain and bias. When only the pressure is performed: Make for the temperature. That is, set K = 0, = 00% and use the expressions (b) and (c) to obtain other gain and bias. Setting range of gain: 0 to +0 Number of significant digits: Minimum unit: Setting range of bias: 000 to +000% Number of significant digits: Minimum unit: 0.00% input-, input-, and input- signals between 0%and 00%. Setting range of low-cut point: 0 to 00% Number of significant digits: Minimum unit: 0.00% Setting range of hysteresis: 0 to 00% Number of significant digits: Minimum unit: 0.00% Computation accuracy: ±0.% (However, input (X) vs. output when K = K = K =, = = 0%, and inputs (X, X) are fixed at 00%.) Gain: K =, K =, and K = Number of significant digits: (e.g.. unacceptable;.,., 0.0 acceptable) Bias: = 0% and = 0% Number of significant digits: (e.g..% unacceptable;.,., 0.0% acceptable) Without extraction of flow input signal. Shipped with the expression (). K= Uncompensated flow input span Compensated flow input span (a) Maximum value Minimum value (of pressure transmitter range) K= (b) Reference pressure (kpa) + 0. = Minimum value (of pressure transmitter range) + 0. Reference pressure (kpa) + 0. (c) Maximum value Minimum value (of temperature range) K= (d) Reference temperature C +. = Minimum value (of temperature range) +. Reference temperature C +. (e) Pressure Temperature ll Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J0X-0E nd Edition Nov. 0, 00-00
6 MXT-S ddition / Subtraction This computing unit adds and subtracts three inputs using the following expression. Y = K {K(X+) + K(X+) + K(X+)} + where Y (): signal (%) X to X (Input- to Input-): Input signal (%) K to K: Gain (no unit) to : Bias (%) Set 0 for K, K, and K of the unused input circuit. Not necessary to specify,, and of the circuit. Setting range of gain: 0 to +0 Number of significant digits: Minimum unit: Setting range of bias: 000 to +000% Number of significant digits: Minimum unit: 0.00% input-, input-, and input- signals between 0%and 00%. Computation accuracy: ±0.% (However, when K = 0., K = 0., K = 0., K =, and = = = = 0%.) Gain: K = 0., K = 0., K = 0., and K = Number of significant digits: (e.g.. unacceptable;.,., 0.0 acceptable) Bias: = 0%, = 0%, = 0%, and = 0% Number of significant digits: (e.g..% unacceptable;.,., 0.0% acceptable) MXT-T Multiplication / Division This computing unit inputs three signals, multiplies and divides the three input signals using the following expressions. The unit can perform temperature-pressure by inputting gas flow signal measured by eddy current meter etc., temperature signal, and pressure signal as three input signals. Y=K (K X+) (K X+) (K X+) + where Y (): signal (%) X to X (Input- to Input-): Input signal (%) K to K: Gain (no unit) to : Bias (%) Settings of gain and bias For temperature-pressure of gas flow measured by eddy current meter etc., use the following expressions to obtain each gain and bias. <For temperature-pressure > How to obtain K,, K,, K,, K, and : K= since the output value of flow transmitter is used as it is. = 0% since the output value of flow transmitter is used as it is. Use the aforementioned expression (b) to obtain K. Use the aforementioned expression (c) to obtain. Use the aforementioned expression (d) to obtain K. Use the aforementioned expression (e) to obtain. K = Uncompensated flow input span Compensated flow input span = 0% since the compensated flow value is normally used as it is. Pressure Temperature <For either temperature or pressure > When only the temperature is performed: Make for the pressure item. That is, set K = 0, = 00% and use the aforementioned expressions (d) and (e) to obtain other gain and bias. When only the pressure is performed: Make for the temperature item. That is, set K = 0, = 00% and use the aforementioned expressions (b) and (c) to obtain other gain and bias. Note: Set K = 0 and = 00% when using this unit as multiplier. Setting range of gain: 0 to +0 Number of significant digits: Minimum unit: Setting range of bias: 000 to +000% Number of significant digits: Minimum unit: 0.00% input-, input-, and input- signals between 0%and 00%. Computation accuracy: ±0.% (However, input (X) vs. output when K = K = K = K =, = = = = 0%, and inputs (X, X) are fixed at 00%.) Gain: K =, K =, K =, and K = Number of significant digits: (e.g.. unacceptable;.,., 0.0 acceptable) Bias: = 0%, = 0%, = 0%, and = 0% Number of significant digits: (e.g..% unacceptable;.,., 0.0% acceptable) ll Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J0X-0E nd Edition Nov. 0, 00-00
7 MXT-U Square Root Extraction This computing unit extracts square root of three inputs using the following expression. low-cut point can be set for the computation result. It is shipped with the low-cut point of %. Y= K (K X+) (K X+) (K X+) + where Y (): signal (%) X to X (Input- to Iinput-): Input signal (%) K to K: Gain (no unit) to : Bias (%) Set K = 0, = 00% when no division is carried out. Setting range of gain: 0 to +0 Number of significant digits: Minimum unit: Setting range of bias: 000 to +000% Number of significant digits: Minimum unit: 0.00% input-, input-, and input- signals between 0%and 00%. Setting range of low-cut point: 0 to 00% Number of significant digits: Minimum unit: 0.00% Computation accuracy: ±0.% (However, input (X) vs. output when K = K = K = K =, = = = = 0%, and inputs (X, X) are fixed at 00%.) Gain: K =, K =, K =, and K = Number of significant digits: (e.g.. unacceptable;.,., 0.0 acceptable) Bias: = 0%, = 0%, = 0%, and = 0% Number of significant digits: (e.g..% unacceptable;.,., 0.0% acceptable) MXT-V High Selector This computing unit selects the highest signal out of three input signals (X, X, and X) or out of two input signals (X and X) to output it (Y). Ordering Information Number of inputs: e.g. -input high selector MXT-W Low Selector This computing unit selects the lowest signal out of three input signals (X, X, and X) or out of two input signals (X and X) to output it (Y). Ordering Information Number of inputs: e.g. -input low selector The information covered in this document is subject to change without notice for reasons of improvements in quality and/or performance. ll Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J0X-0E nd Edition Nov. 0, 00-00
General Specifications
General Specifications GS 77J04H0-0E Model MH Isolator (Free Range Type) General The MH is a plug-in type isolator that converts DC current or DC voltage signals into isolated DC current or DC voltage
More informationGeneral Specifications
General Specifications GS J0U0-0E Model MU Universal Temperature Converter (Free Range Type) General The MU is a plug-in type universal temperature converter that converts input signal (thermocouple, RTD
More informationGeneral Specifications
General Specifications GS J08X0-0E FX Series Computing Units (Variable Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationGeneral Specifications
General Specifications GS 77J09X01-01E WX1 Series Computing Units (Variable Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationGeneral Specifications
General Specifications GS J08X0-0E FX Series Computing Units (mv Input/Variable Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity
More informationGeneral Specifications
General Specifications GS 77J01Q08-01E Model VJQ8 Pulse to Analog Converter (Multi-function) (Isolated Single-output and Isolated Dual-output Types) General This plug-in type pulse to analog converter
More informationGeneral Specifications
General Specifications GS 77J0A070E Model VJA7 Distributor (Multifunction) (Isolated Singleoutput and Isolated Dualoutput Types) Overview This plugin type distributor is used in combination with wire type
More informationGeneral Specifications
General Specifications GS J0X02-01E WX2 Series Computing Units (Variable/Fixed Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationGeneral Specifications
General Specifications GS J08X0-0E FX Series Computing Units (Variable/Fixed Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationUser s Manual. Model MXS Universal Computing Unit (1-input, Isolated 2-output Type) MODEL AND SUFFIX CODES
User s Manual Model MXS Universal Computing Unit (1-input, Isolated 2-output Type) IM 77J04X11-01E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 180-8750 Japan Phone: 81-422-52-7179
More informationUser s Manual. Model MA5 Distributor (Free Range Type) CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT MODEL AND SUFFIX CODES
User s Manual Model MA5 Distributor (Free Range Type) IM 77J04A05-0E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 80-8750 Japan Phone 8-422-52-779 Facsimile 8-422-52-6793 Please
More informationUser s Manual. Model MS5 Potentiometer Converter (Free Range Type) MODEL AND SUFFIX CODES CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT
User s Manual Model MS5 Potentiometer Converter (Free Range Type) IM 77J04S05-0E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 80-8750 Japan Phone: +8-422-52-779 Facsimile:
More informationGeneral Specifications
General Specifications Model UM350 Digital Indicator with Alarms GS 05F0D00E General Model UM350 Digital Indicator with Alarms is a precision alarm instrument with universal input. For excellent monitoring
More informationGeneral Specifications
General Specifications MODEL UT50L Limit Controller GS 5DD-0E Overview The UT50L is an FM approved limit controller that can be configured either as a high limit or as a low limit controller by a user.
More informationGeneral Specifications
General Specifications Model UM330 Digital Indicator with Alarms GS 05F0D00E General Model UM330 Digital Indicator with Alarms is a precision alarm instrument with universal input /8DIN. For excellent
More informationGeneral Specifications
General Specifications GS 05F01D01E MODEL UM351 Digital Indicator with Alarms with Active Color PV Display General Model UM351 Digital Indicator with Alarms is a precision alarm instrument provided with
More informationMODEL: M2XU MODEL: M2XU [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
More informationGeneral Specifications
General Specifications MODEL UM0 Digital Indicator with Alarms GS 0F0D00E General Model UM0 Digital Indicator with Alarms is a precision alarm instrument with universal input /8DIN. For excellent monitoring
More informationMODEL: M2VF MODEL: M2VF [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
More informationMODEL: M2XPA3. [2] EXCITATION 2: 4 V DC / 20 ma 3: 8 V DC / 20 ma 4: 12 V DC / 20 ma Configurator software is used to change the excitation value.
Super-mini Signal Conditioners Mini-M Series FREQUENCY TRANSMITTER (PC programmable) Functions & Features Converts the output from a pulse-type transducer into a standard process signal PC programmable
More informationMODEL: 20VS2-02. Hybrid IC Isolation Amplifiers 20 Series
MODEL: 0VS-0 Hybrid IC Isolation Amplifiers 0 Series ISOLATION AMPLIFIER (-port isolation) Functions & Features Being used for printed wiring board installation High-linearity Low power consumption Isolating
More informationGeneral Specifications
General Specifications GS 0F01D0E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision 1/8 DIN alarm instrument provided with
More informationGeneral Specifications
General Specifications GS 0F01D01E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision alarm instrument provided with universal
More informationMODEL: M2SES SEN TRONIC AG [3] OUTPUT
Super-mini Signal Conditioners Mini-M Series HIGH/LOW SELECTOR Functions & Features Monitors two DC input signals and transmits an output signal proportional to the higher or lower input CE marking UL
More informationGeneral Specifications
General Specifications Model UT, UT Temperature Controller GS CE-E GENERAL UT series temperature controllers provide only the functions and size you require for your application. /6 DIN sizes is available.
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationGeneral Specifications
General I/O Adaptors (for N-IO) GS 33J62F30-01EN [Release 6] GENERAL This General (GS) describes the hardware specifications of I/O adaptors that enable extended functions setting for analog digital I/O
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
More informationBASIC FEATURES C %RH. Shimaden, Temperature and Humidity Control Specialists. CP3701: Thermocouple Temperature Converter
Shimaden, Temperature and Humidity Control Specialists C %RH CP3701: Thermocouple Temperature Converter CP3702: R.T.D. Temperature Converter CP3703: mv DC-DC Converter CP3704: V/mA DC-DC-Converter CP3705:
More informationMODEL: M2DYS SEN TRONIC AG
Super-mini Signal Conditioners Mini-M Series CURRENT LOOP SUPPLY Functions & Features Powers a 20 ma DC current loop Short circuit protection Applicable to smart transmitters CE marking UL approval Typical
More informationMODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
More informationZ4D-F. LED-type Micro Displacement Sensor with Many Features in a Compact Body. Micro Displacement Sensor. Ordering Information.
/ Length Micro Sensor LED-type Micro Sensor with Many Features in a Compact Body Compact body only /4th the volume of our previous product. % cost reduction over our previous product. High performance
More informationMODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
More informationGeneral. Specification FA-M3 F3CX04-0N. Temperature Monitoring Module GS 34M6H11-03E. General. Components and Functions. Model and Suffix Codes
General Specification GS 3M6H11-03E F-M3 F3CX0-0N Temperature Monitoring Module General The F3CX0-0N is a temperature monitoring module for the F-M3. - It occupies a single slot ut can monitor four channels
More informationMODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
More informationMODEL: W2DYS SEN TRONIC AG. Mini-MW Series
MODEL: WDYS Space-saving Dual Output Signal Conditioners Mini-MW Series CURRENT LOOP SUPPLY Functions & Features Powers a 0 ma DC current loop Short circuit protection Applicable to smart transmitters
More informationModel Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models
Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model
More informationGeneral Specifications
General Specifications Signal Conditioner Cards OUTLINE Signal Conditioner Cards, which interface to the process, are installed in Signal Conditioner Nests. [Release 6] The signal conditioner cards can
More informationGeneral Specifications
General Specifications Signal Conditioner Cards GS 33K50H80-50E OUTLINE Signal Conditioner Cards, which interface to the process, are installed in Signal Conditioner Nests. [Release 5] The signal conditioner
More informationMODEL: DA3. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT D/A CONVERTER (16-bit resolution) Functions & Features Converts parallel digital signal into a DC output BCD, binary, offset binary, two's complement, reflected binary
More informationJRQ2 ENCODER POSITION TRANSMITTER MODEL. Plug-in Signal Conditioners M-UNIT. (field-programmable; built-in excitation)
Plug-in Signal Conditioners M-UNIT ENCODER POSITI TRANSMITTER (field-programmable; built-in excitation) MODEL JRQ MODEL & SUFFIX CODE SELECTI JRQ MODEL SELECTI Open collector Voltage pulse RS- line driver
More information12 V DC ±10 % 150 ma max. 130 ma max. 120 ma max.
96 PHOTO PHOTO ON/OFF Input SERI Related Information General terms and conditions... F-3 General precautions... P.9 MEASURE panasonic.net/id/pidsx/global Multi-functional D rail mounting slim sensor controller
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16 & SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large 2 mm bright
More informationLIGHT TRANSMITTER OPERATION MANUAL. 4 to 20 ma. Model : TR-LXT1A4
4 to 20 ma LIGHT TRANSMITTER Model : TR-LXT1A4 Your purchase of this LIGHT TRANSMITTER marks a step forward for you into the field of precision measurement. Although this TRANSMITTER is a complex and delicate
More informationSEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.
INDEX SECTION CONTENTS PAGE NO. SEM210 SERIES 1.0 DESCRIPTION 1 2.0 SPECIFICATION 15 3.0 INSTALLATION 67 Programmable Inhead Universal Temperature Transmitter Status Instruments Ltd, Green Lane Business
More informationHG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS
20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,
More informationMODEL: M1EXT. with Display M1E Series
2 Channel Super-mini Signal Conditioners with Display M1E Series THERMOCOUPLE TRANSMITTER (2 channels, PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized
More informationTheta 60R. Technical Data Sheet. Special Features. Fig. 2 Theta R, 2 channel version, in housing S17 hole mounting brackets pulled out.
Technical Data Sheet Theta 60R 60 R 60 R Fig. Theta R, channel version, in housing S7 clipped on to a top - hat rail. Fig. Theta R, channel version, in housing S7 hole mounting brackets pulled out. Theta
More informationSolid State Pressure Sensors D8M
Solid State Pressure Sensors D8M Solid State Pressure Sensors with Analog, Pulse or Frequency Outputs Compact housing measures 30L x 30W x 12.4H mm. Accept 4 mm OD tubing (D8M-A1, -R1); 3 mm OD tubing
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationMODEL: M2EXT. Super-mini Signal Conditioners with Display Mini-M M2E Series
Super-mini Signal Conditioners with Display Mini-M ME Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized process signal
More informationIsolated, Linearized Thermocouple Input 7B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized Thermocouple Input 7B47 FEATURES Interfaces, amplifies and filters input voltages from a J, K, T, E, R, S, B or N-type thermocouple. Module provides a precision output of either +1
More informationIsolated, Thermocouple Input 7B37 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Thermocouple Input 7B37 FEATURES Interfaces, amplifies, and filters input voltages from a J, K, T, E, R, S, or B-type thermocouple. Module provides a precision output of either +1 V to +5 V or
More informationMODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large
More informationTwo outputs: contact and non-contact
SRIS Sensor Controller Multi-functional slim sensor controller DI rail mounting Two outputs: contact and non-contact Connects two sensors -C7W Mountable on 3 mm.378 in DI rail by one-push. It reduces mounting
More informationMODEL: M6SXT. POWER INPUT DC Power R: 24 V DC
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection 5.9-mm wide ultra-slim design Low profile
More informationPLUG-IN TRANSDUCER SOFT SPEC. TYPE C SERIES
Common standard specifications High quality/high reliability Highly reliable electronic parts are adopted. Aging test of each part as well as burn-in aging test of the product under a high temperature
More informationIsolated, Linearized Thermocouple Input 5B47 FEATURES APPLICATIONS PRODUCT OVERVIEW
Isolated, Linearized Thermocouple Input 5B47 FEATURES Isolated Thermocouple Input. Amplifies, Protects, Filters, and Isolates Thermocouple Input Works with J, K, T, E, R, S, and B-type thermocouple. Generates
More informationB850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationThermoPLUS Smart Temperature Transmitter
No. SS2-TT110-0100 ThermoPLUS Smart Temperature Transmitter Model TT61/71 (Integral Sensor type) OVERVIEW The models TT61/71 Smart Transmitter are temperature transmitters for the model TT90 integral temperature
More informationUSB-2404-UI Specifications
Specifications Document Revision 1.1, April, 2011 Copyright 2011, Measurement Computing Corporation All specifications are subject to change without notice. Typical for the range 0 to 60 C unless otherwise
More informationMODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
More informationTurbomachinery I/O Modules
General Specifications Turbomachinery I/O Modules GS 33J60F9001EN [Release 6] GENERA This document of General Specification (GS) contains the hardware specifications of the Turbomachinery I/O Modules (FIO).
More informationResistance Temperature Device Conversion Module
No.SS2-2330-0350 (Rev. 1) SystempaK (Digital/Single Case) Resistance Temperature Device Conversion Module Model J-SRP 90/95 Introduction The Resistance Temperature Device (RTD) Conversion Module (J-SRP)
More informationSolid-state Twin Timer
Solid-state Twin Timer -F Operates in flicker- or flicker- start mode with one Unit. Independent - and -time settings. Combinations of long - or -time and short - or -time setting are possible. Long time
More informationThis section is specifically about safety matters
6 4 ) 1 6 4 1 -, 1 8-4 6-4 1 6 4 7 + 6 1 ) 7 ) 4 ) 6 1-6 6-4. 4. 0 J E? A Thank you for choosing this Mitsubishi transistorized Inverter option. This instruction manual gives handling information and precautions
More informationPA-850 PRESSURE TRANSDUCERS WITH AMP. PA R - N R2 FEATURES MODEL NUMBER DESIGNATION
INTERNAL STRUCTURE (R 1/4) 4 1 2 3 Part name Material 1 2 FEATURES 3 4 Stainless steel diaphragm ABS (Acrylonitrile butadiene styrene) + PC (Polycarbonate) High corrosion resistance and drip-proof construction
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationP5201 Universal Programmable Transmitters with Galvanic Isolation
Transmitters - KB0288-2012/09 P5201 Universal Programmable Transmitters with Galvanic Isolation One type of transmitter for all regular resistance and thermocouple sensors. Linearized output signal 4 to
More informationMODEL: M3LU2. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
MODEL: MLU Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step
More informationModels UT550/UT520 Digital Indicating Controllers User s Manual for Loop Control for Backup
Instruction Manual Models UT550/UT520 Digital Indicating Controllers User s Manual for Loop Control for Backup IM 05D01C02-45E IM 05D01C02-45E 1st Edition Blank Page Introduction Thank you
More information22 Series Relays. Technical Data...1. Specifications...2. Model Number Structure - Relays...3. Model Number Selection
Relays 22 Technical Data...1 Specifications...2 Model Number Structure - Relays...3 Model Number Selection... 4-5 Electrical Characteristics...6 Accessories...7 Dimensions...8 Instructions...10 Safety
More informationIsolated High Level Voltage Output 7B22 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated High Level Voltage Output 7B22 FEATURES Unity gain single-channel signal conditioning output module. Interfaces and filters a +10 V input signal and provides an isolated precision output of +10V.
More information20 AMP POWER RELAY HG RELAYS. a HG HG HG Unit weight. Ex. HG 2 AC 240 V
20 AMP POWER RELAY HG RELAYS a 3 1.4 5 RoHS Directive compatibility information http://www.nais-e.com/ a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A 250 V AC resistive and 1.5 kw 3 phase 220 V AC motor
More informationGC83 Digital Indicators & GC93 Digital Meter Relay
Cat.No. B- GC83 Digital Indicators & GC93 Digital Meter Relay OUTLINE Model GC83 has been designed exclusively for indication. Model GC93 is equipped with a comparator like a relay and is applied to a
More informationSHIMADEN DIGITAL INDICATOR
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD24 & KR16A SHIMADEN DIGITAL INDICATOR BASIC FEATURES ohigh Accuracy ±0.1% FS+1 digit o1/1000ºc Resolution Indication Possible (Pt input
More informationRelays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.
RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in
More informationIsoTrans 41. The load capability of the 20 ma source is limited and therefore requires efficient use of the load voltage.
ProLine Interface Technology Loop-Powered Isolators for Standard Signals For isolation of 0(4)... 20 ma standard current signals on up to 3 channels. The Task If no power supply is available, the galvanic
More informationB850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDistributed by: www.jameco.com -8-83-22 The content and copyrights of the attached material are the property of its owner. VDE TV-, AMP ( Form A) Power Relay HE RELAYS.299 3.8.9 RoHS Directive compatibility
More informationFA-M3 Analog Input Modules. Contents. F3AD04-5R, F3AD08-6R, -5R, -4R High-Resolution Analog Input Module... 3
General Specifications GS 34M06H04E FAM3 Analog Input Modules Contents F3AD045R, F3AD086R, 5R, 4R HighResolution Analog Input Module... 3 F3AD045V, F3AD085V, F3AD084W Analog Input Module... 7 Function
More informationMODEL: AS4V. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT DC ALARM (dual or quad alarm trip; field-configurable) Functions & Features Provides relay outputs at preset DC input levels Quad or dual trip Setting and display in
More informationMODEL: JB2. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT ANALOG BACK STATION Functions & Features Enables manual loading providing hold/increase/ decrease signals to a device controlled by PID controller When the PID controller
More informationGeneral Specifications
General Specifications Model UT Digital Indicating Controller GS 0D01C0E General Model UT Digital Indicating Controller is an intelligent, microprocessor based digital indicating controller with powerful
More informationSilicon Wafer Mapping Sensor F3M-S. Ordering Information. Application Examples. Allows Simultaneous Mapping of up to 25 Silicon Wafers
R Silicon Wafer Mapping Sensor Allows Simultaneous Mapping of up to 25 Silicon Wafers H Economical, one sensor detects most wafer types, including dummy wafers H Models match wafer sizes of 300 mm, 200
More informationElectronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
More informationMODEL: M3LU. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step Cal calibration
More informationCEC VIBRATION TRANSMITTER
CEC 1-808 VIBRATION TRANSMITTER Operation & Maintenance Manual 746 Arrow Grand Circle Covina, CA 91722 United States of America Tel: (626) 938-0200 Fax: (626) 938-0202 Internet: http://www.cecvp.com E-mail:
More informationDIGITAL THERMOMETER VIEW RECORDERS Digital Thermometer FEATURES
Digital Thermometer High-Accuracy Reference Junction Compensation: Compensation accuracy (±0.2 C) Input terminals are provided on both front and rear panels, and an input site is switch selectable. The
More informationModel UP350 Program Controller
User s Manual Model UP350 Program Controller User s Manual IM 05E01D02-41E IM 05E01D02-41E 2nd Edition Blank Page Introduction i Thank you for purchasing the UP350 program controller. How to
More informationPH201G (Style B) Distributor
User s Manual PH201G (Style B) Distributor R 6th Edition Blank Page INTRODUCTION This instruction manual describes the procedures for installing, wiring and carrying out simple maintenance
More informationMODEL: R1C-GH. Remote I/O R1X Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
Remote I/O R1X Series THERMOCOUPLE & DC INPUT MODULE (16 points; CC-Link Ver.1.1/Ver.2.) Functions & Features 16-point thermocouple or DC inputs CC-Link interface CC-Link Version 1.1 and 2. can be switched
More informationLED Collimated Beam Sensor LA-300 SERIES. LED collimated beam type which is as accurate as a laser sensor, but much safer.
99 PHOTO PHOTO LED Beam Sensor - SERIES Related Information General terms and conditions... P.1 Sensor selection guide...p.11~ / P.~ CA... P.79 ~ General precautions... P.7 Conforming to EMC Directive
More informationModel VJCE-01A VJ Mounting Base for Communication
User s Manual IM 77J01C51-11E Model VJCE-01A VJ Mounting Base for Communication Please read through this manual as well as the manual for respective instruments of JUXTA VJ series mounted on the VJ mounting
More informationUNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical
More informationOEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationSCC-FV01 Frequency Input Module
USER GUIDE SCC-FV01 Frequency Input Module Conventions The SCC-FV01 frequency input module is a frequency-to-voltage converter designed to measure signals from frequency-generating sensors and other periodic
More information