National Guard Products, Inc. The products you count on. The people you trust.

Transcription

1 National Guard Products, Inc. The products you count on. The people you trust. Product Catalog Threshold Products Saddle Half Saddle Offset Carpet Dividers Carpet Edges Bumper Seal Offset Bumper Seal Stop Strips Elevators RCE Anchors ADA Compliant Ramps Rubber Ramps Diamond Tread Plate Cover Plates Floor Closer Covers Threshold Assembly Parts Safety Tread Plates Stair Nosings Cast Aluminum Thermal Barrier Residential Brass Stainless Steel Thresholds

2 National Guard Products, Inc. The products you count on.the people you trust. Phone: Symbols - Legend Symbols/Legend ADA COMPLIANT Barrier Free Thresholds meet the requirements of the AMERICANS WITH DISABILITIES ACT Accessibility Guidelines for Buildings and Facilities (ADAAG)-September 2002, and ICC/ANSI A Accessible and Usable Building and Facilities H H 7 7 C L A S S 2 8 H I F 7 I E D UL10B and CAN4-S104-80M CLASSIFIED, complies with NFPA 80 and NFPA 252 for application to Steel fire doors rated up to 3 Hrs., and Wood type fire doors rated up to 11/2 hrs. (Rating on some items vary and are noted.) POSITIVE PRESSURE UL CLASSIFIED, Category J listed. Complies with IBC, UBC7-2 (1997), NFPA 80 and NFPA 252 for application to Positive Pressure Steel fire doors rated up to 3 Hrs., and Wood type Fire doors rated up to 1-1/2 Hrs. (Ratings on some items vary and are noted.) SLIP-RESISTANT NGP SIA (Slick-it-Ain t) textured surface is available on all thresholds. Our process embeds and fuses bits of hot nickel and titanium into the surface of the threshold. This technology originally developed for use on aircraft carrier decks is very skid resistant and will not wear off. ANSI/BHMA CERTIFIED. Certified thresholds comply with A and are listed in the BHMA Certified Products Directory. Online product listings at ANSI/BHMA ANSI/BHMA The following chart interprets ANSI/BHMA numbers which identify material and type of products. For products that meet ANSI/BHMA Standards, look for the BHMA certified logo next to the product in our catalog. For a complete listing refer to the BHMA Certified Products Directory online at American National Standard for Thresholds: ANSI/BHMA A (2006) 1 Product Section 2 Material 3 Configuration 4 Surface 5 Description 6 Description J designates Architectural Door Trim, Thresholds 1. Architectural Extruded Brass or Bronze 3. Aluminum 5. Stainless Steel 7. Rubber & non-metallics 0. Other 1. Compressing Top 2. Flat Saddle 3. Half Saddle 4. Interlocking 5. Rabbeted, latching/ Panic 6. Rabbeted, latching/ Panic w/gasket 7. Plate 8. Ramped 9. Saddle for floor closer. 0. None designated 1. Fluted 2. Fluted w/abrasive 3. Smooth 4. Smooth w/abrasive 1. Applied Stop 2. Applied Stop w/ gasket 3. Barrier Free 4. Carpet Separator 5. Ends Mitered 6. Expansion Assembly 7. Hook Strip Applied to door 8. Offset 9. Thermal Barrier 0. None Designated 1. Applied Stop 2. Applied Stop w/ gasket 3. Barrier Free 4. Carpet Separator 5. Ends Mitered 6. Expansion Assembly 7. Hook Strip Applied to door 8. Offset 9. Thermal Barrier 0. None Designated NGP, Inc T 2

3 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Threshold Product Index: Anchors Assembly Parts Brass Bumper Seal Carpet Dividers Cast Cover Plates Diamond Tread Plate Elevators Floor Closer Covers Half Saddle Interlocking T31 T22-T23,T43 T35-T43 T8-T11,T34,T38 T12 T27 T24,T34,T35 T25 T31 T29 T13,T39 T28,T42 Offset T12 Residential T30 Return Closed Ends T31 Ramps T16-T21 Saddle T5-T7,T32-T33,T36-T37 Safety Tread Plates T25 Stair Nosings T26 Stainless Steel T32-T34 Stop Strips T31 Thermal Barrier T14-T15,T40-T41 Numerical Index Numerical Index: BAR1 T23 BAR1BR T43 BAR2 T23 BAR2BR T43 BAR2SS T24, 34 2 T31 2BR T35 BAR3 T23 BAR3BR T43 BAR4 T23 BAR4BR T43 4 T31 4BR T35 BAR5 T23 BAR5BR T43 BAR6SS T24, 34 RCE-9 T17 12V T30 RCE-15 T17 20 T30 RCE-21 T17 21 T30 23 T30 25 T30 RCE-30 T17 30 T30 RR42 T21 R50 T16, 20 RO50 T18 57 T31 58 T31 58BR T37 R75 T16 RO75 T18 80 T28 80B T42 81 T28 81B T42 82 T28 83 T28 83BR T42 R100 T16 RO100 T T6 123 T28 R125 T16 RO125 T18 R150 T16 RO150 T18 R175 T16 RO175 T18 R200 T16 RO200 T T7 215 T13 215BR T39 R225 T16 RO225 T18 R250 T16 RO250 T T13 315BR T T13 321BR T T13 322BR T T T13 324BR T T13 325BR T T13 327BR T T13 350BR T T T12 404BR T T T T5 409 T T5 411 T5 411BR T T7 412SS T T5 413BR T36 413SS T T T T13 415BR T T T12 417BR T35 418BR T T7 424BR T37 424E T6 425 T7 425BR T37 425E T6 425HD T8 426 T7 426BR T37 426E T6 427 T7 427BR T37 427E T6 428BR T37 428E T6 429E T6 429BR T37 430E T6 430BR T T28 432BR T T T T T T T28 442BR T T T13 473BR T42 483BR T42 484BR T42 512SS T T5 513BR T36 513HD T8 513SS T T7 525 T7 612SS T T5 613SS T32 613BR T T T T T T T T12 700E T31 712SS T T5 713BR T36 713SS T T T T9 804 T9 812SS T T5 813BR T36 813SS T T24 814SS T24, T24 818BR T35 818SS T24, T T T9 883 T8 883BR T38 883SS T T T T T11 884BR T38 884SS T T T T T9 888 T T9 890BR T T T T T T28 895BR T T8 896BR T38 896SS T T10 912SS T T5 913SS T T8 951 T T T T20 RR952 T T T T T T SS T T5 1013SS T T T T T T T T T T T T T T T27 RR5007BL T T T T T T BR T T T T BR T T BR T T BR T T BR T T BR T T BR T T BR T T BR T T T T T T T T T T N T T T BR T T BR T T BR T T BR T T BR T T BR T T BR T T BR T T BR T T BR T T BR T T7 RCE T31 Type 1 T29 Type 3 T29 Type 4 T29 Type 5 T29 T 3

4 National Guard Products, Inc. The products you count on.the people you trust. Phone: Finishes Finish Information Base Metal Finishes Available: All finishes are not available on all products. Refer to part numbers for availability. Aluminum Mill (AE) Clear Gold Dark Bronze Bright Polished (Alloy=6063, ANSI/BHMA 719 ANSI/BHMA 628 ANSI/BHMA 688 ANSI/BHMA 710 ANSI/BHMA 717 Hardness=T5) (No Suffix) NGP Suffix A NGP Suffix B NGP Suffix DKB NGP Suffix POL Architectural Satin Brass Polished Brass Dark Bronze Polished Brass with Forever Finish Bronze ANSI/BHMA 720 ANSI/BHMA 721 ANSI/BHMA 722 Matches US3 (Alloy=CDA385) NGP Suffix BR NGP Suffix BR-POL NGP Suffix BR-DKB NGP Suffix BR-POL- Forever Finish Stainless Steel Mill Finish #28 Polished Stainless Brushed Stainless (Type = 304) ANSI/BHMA 629 Finish #4 NGP Suffix SS NGP Suffix SS-POL ANSI/BHMA 630 NGP Suffix SS-Brushed SIA (Slick It Ain t) finish is our slip-resistant textured surface; available on all our thresholds. Our process embeds and fuses bits of hot nickel and titanium into the surface of the threshold. This technology originally developed for use on aircraft carrier decks is very skid resistant and will not wear off. POWDERCOAT FINISHES See page L2 for standard colors. Consult Factory for custom color matching. General Information To allow for field sizing and fitting, thresholds are furnished longer than ordered: 1/2 is added under 61 and 1 is added over 61. Thresholds requiring special drilling or notching must have details provided with the order. Catalog illustrations are full scale, except as noted. Radiation shielding is available on most thresholds. Specify Lead Lined. LEED LEED Green Building Rating System The LEED (Leadership in Energy and Environmental Design) Green Building Rating System is a national standard for developing high-performance, sustainable buildings developed by the U.S. Green Building Council. NGP aluminum and brass/bronze thresholds contain 70% to 80% post-consumer recycled material contributing LEED points under Materials and Resources, credits 4.1 and 4.2, Recycled Content, equal to 75% of the value of the thresholds. If the building where the products are installed is within 500 miles of our manufacturing facility in Memphis,TN then NGP materials contribute toward Materials and Resources, credits 5.1 and 5.2, Local/Regional Materials, in LEED New Construction versions 2.0 and 2.1. MADE IN USA All manufactured products in this catalog are produced in the United States, and comply with the Buy American Act. T 4

5 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS lbs./ft. 408DKB.10 lbs./ft lbs./ft 410DKB.40 lbs./ft lbs./ft 411DKB.50 lbs./ft lbs./ft. 413DKB.58 lbs./ft. All thresholds this page Typical Wall " 1/8" MATERIALS & FINISHES Aluminum mill finish DKB - Aluminum dark bronze finish SLIP RESISTANT SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. FASTENERS #10 x -1-1/2 FH zinc plated wood screws are included on mill finish thresholds. Zinc plated antique bronze finish screws are provided to match DKB finish. Saddle Thresholds lbs./ft. 513DKB.74 lbs./ft lbs./ft. 613DKB.88 lbs./ft lbs./ft 713DKB 1.01 lbs./ft. 7" lbs./ft 813DKB 1.20 lbs./ft lbs./ft 913DKB 1.41 lbs./ft lbs./ft 1013DKB 1.63 lbs./ft. 8" 9" 10" T 5

6 National Guard Products, Inc. The products you count on.the people you trust. Phone: Saddle Thresholds 424E.60 lbs./ft. 424EDKB.60 lbs./ft. All thresholds this page Typical Wall.109 MATERIALS & FINISHES Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. 425E.80 lbs./ft. 425EDKB.80 lbs./ft Typical Wall.109 VINYL FOOT SEAL used instead of caulking to increase the weather resistance of the threshold. Specify on order 426E.90 lbs./ft. 426EDKB.90 lbs./ft. Typical Wall lbs./ft. 111DKB.93 lbs./ft. 427E.1.08 lbs./ft. 427EDKB 1.08 lbs./ft. Typical Wall.109 7" 428E 1.20 lbs./ft. 428EDKB 1.20 lbs./ft. Typical Wall.109 8" 429E 1.42 lbs./ft 429EDKB 1.42 lbs./ft. Typical Wall.109 9" 430E 1.59 lbs./ft. 430EDKB 1.59 lbs./ft. Typical Wall " T 6

7 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS All thresholds this page lbs./ft. 211DKB.43 lbs./ft. 3" lbs./ft. 412DKB.625 lbs./ft. MATERIALS & FINISHES Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. Saddle Thresholds lbs./ft. 424DKB.72 lbs./ft lbs./ft. 425DKB 1.00 lbs./ft. Typical Wall lbs./ft. 426DKB 1.35 lbs./ft. Typical Wall lbs./ft. 427DKB 1.58 lbs./ft. Typical Wall.188 7" lbs./ft. 8475DKB 1.58 lbs./ft lbs./ft. 524DKB.72 lbs./ft. Typical W all.188 5/8" lbs./ft. 525DKB.93 lbs./ft. Typical Wall.188 5/8" T7

8 National Guard Products, Inc. The products you count on.the people you trust. Phone: Heavy Duty Thresholds HEAVY DUTY THRESHOLDS For use where forklift or vehicular traffic occurs. Greatly exceeds ANSI A load test requirements. Optional SIA (Slick It Ain t) fused slip-resistant finish recommended in moisture prone areas. 425HD 1.6 lbs./ft. 425HDDKB 1.6 lbs./ft. Typical Wall.244 All thresholds this page 513HD 1.4 lbs./ft. 513HDDKB 1.4 lbs./ft. ADA Bumper Seal Thresholds ADA COMPLIANT BUMPER SEAL THRESHOLDS lbs./ft. 896DKB.64 lbs./ft lbs./ft. 950DKB.50 lbs./ft. Excellent for use with Automatic Door Bottoms Typical Wall.078 Typical Wall.105 FASTENERS #10 x -1-1/2 FH zinc plated wood screws are included on mill finish thresholds. Zinc plated antique bronze finish screws are provided to match DKB finish. MATERIALS & FINISHES Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") T 8

9 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS lbs./ft. 882DKB.83 lbs./ft. 1 5/8" lbs./ft. 890B.82 lbs./ft. 890DKB.82 lbs./ft lbs./ft. 804DKB.80 lbs./ft. 3/ 7/8" All thresholds this page Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") Bumper Seal Thresholds Typical Wall lbs./ft. 884DKB 1.00 lbs./ft. Typical Wall.172 7/8" VINYL FOOT SEAL used instead of caulking to increase the weather resistance of the threshold. Specify on order lbs./ft. 803DKB.80 lbs./ft lbs./ft. 883DKB 1.10 lbs./ft. Typical Wall.105 5/8" FASTENERS #10 x -1-1/2 FH zinc plated wood screws are included on mill finish thresholds. Zinc plated antique bronze finish screws are provided to match DKB finish. Typical Wall.161 5/8" lbs./ft. TO BE DISCONTINUED Typical Wall.188 5/8" 7/8" Special pricing on 887 while supplies last. See Price List T 9

10 National Guard Products, Inc. The products you count on.the people you trust. Phone: Bumper Seal Thresholds lbs./ft. 8135DKB.60 lbs./ft lbs./ft. 892DKB.61 lbs./ft..125 Typical Wall / Typical Wall /8" 7/8" All products this page Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") lbs./ft. 893DKB.86 lbs./ft. Typical Wall /1 Typical Wall.105 5/8" 3 Typical Wall.115 5/8" lbs./ft. 897DKB.91 lbs./ft. Typical Wall.166 VINYL FOOT SEAL used instead of caulking to increase the weather resistance of the threshold Specify on order lbs./ft. 891DKB.62 lbs./ft lbs./ft. 894DKB.75 lbs./ft. FASTENERS #10 x 1-1/2 FH zinc plated wood screws are included on mill finish thresholds. Zinc plated antique bronze finish screws are provided to match DKB finish. 3 T 10

11 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS OffSet Bumper Seal Thresholds lbs./ft. 885DKB 1.10 lbs./ft lbs./ft DKB 1.10 lbs./ft lbs./ft DKB 1.31 lbs./ft lbs./ft DKB 1.52 lbs./ft. WELD 8" Typical Wall.140 Typical Wall All products this page Bumper Seal 7/8" Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") Bumper Seal Thresholds WELD lbs./ft DKB 1.16 lbs./ft lbs./ft DKB 1.16 lbs./ft lbs./ft DKB 1.16 lbs./ft lbs./ft. 888DKB 1.22 lbs./ft. Typical Wall.156 5/8" 1 VINYL FOOT SEAL used instead of caulking to increase the weather resistance of the threshold. Specify on order T 11

12 National Guard Products, Inc. The products you count on.the people you trust. Phone: Offset Thresholds OffSet Thresholds lbs./ft. 653DKB.78 lbs./ft lbs./ft. 659DKB.89 lbs./ft. 5 All products this page 7" lbs./ft. 655DKB.84 lbs./ft. 3/ lbs./ft. 656DKB 1.00 lbs./ft. Carpet Dividers/Carpet Edges Carpet Dividers lbs./ft. 414DKB.31 lbs./ft lbs./ft. 404DKB.70 lbs./ft. 1 3/ lbs./ft DKB.80 lbs./ft. 3/ Carpet Edges lbs./ft. 416DKB.19 lbs./ft lbs./ft. 417DKB.50 lbs./ft lbs./ft DKB.39 lbs./ft. 1 7/1 Typical Wall Typical Wall / 3/ lbs./ft. 409DKB 1.20 lbs./ft. T 12

13 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS 2" lbs./ft. 215DKB.29 lbs./ft lbs./ft. 315DKB.44 lbs./ft lbs./ft. 415DKB.51 lbs./ft. MATERIALS & FINISHES 3" All thresholds this page lbs./ft. 321DKB.34 lbs./ft lbs./ft. 322DKB.48 lbs./ft. not intended for insert 3" Typical Wall lbs./ft. 323DKB.56 lbs./ft. 3" not intended for insert 2" Half-Saddle Thresholds Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish lbs./ft. 327DKB.64 lbs./ft. not intended for insert All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. VINYL FOOT SEAL used instead of caulking to increase the weather resistance of the threshold. Specify on order lbs./ft. 350DKB.83 lbs./ft lbs./ft. Typical Wall DKB 1.20 lbs./ft. not intended for insert when installed with the non-beveled edge FLUSH with flooring, or where no greater than 1/4 vertical rise occurs lbs./ft. 325DKB 1.32 lbs./ft lbs./ft. 457DKB.79 lbs./ft. Typical Wall.250 3/ lbs./ft. 458DKB 1.11 lbs./ft. 3/ 7" T 13

14 National Guard Products, Inc. The products you count on.the people you trust. Phone: Thermal Barrier Thresholds lbs./ft. 8424DKB.75 lbs./ft lbs./ft. 8425DKB.90 lbs./ft. 5 " All thresholds this page lbs./ft. 8426DKB 1.00 lbs./ft lbs./ft. 8427DKB 1.20 lbs./ft. 7 " lbs./ft. 8428DKB 1.30 lbs./ft. 8" lbs./ft. 8429DKB 1.60 lbs./ft. 9" lbs./ft. 8430DKB 1.70 lbs./ft. 10" T 14

15 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS All thresholds this page lbs./ft. 8434DKB.82 lbs./ft lbs./ft. 8435DKB.95 lbs./ft. 7/8" 7/8" Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") FASTENERS #10 x -1-1/2 FH zinc plated wood screws are included on mill finish thresholds. Zinc plated antique bronze finish screws are provided to match DKB finish. Thermal Barrier Bumper Seal Thresholds 7/8" lbs./ft. 8436DKB 1.11 lbs./ft. 7/8" lbs./ft. 8437DKB 1.29 lbs./ft. 7" T 15

16 1 National Guard Products, Inc. The products you count on.the people you trust. Phone: ADA Compliant Interlocking Ramps R50.94 lbs./ft. R50DKB.94 lbs./ft. 3/ 1 R lbs./ft. R75DKB 1.63 lbs./ft. R lbs./ft. R100DKB 2.06 lbs./ft. R lbs./ft. R125DKB 2.77 lbs./ft. R lbs./ft. R150DKB 3.82 lbs./ft. 9" 12" 1 18" All products pages T16 and T17 Illustrations shown at 50% 1 3/ R lbs./ft. R175DKB 4.53 lbs./ft. 2 2" R lbs./ft. R200DKB 5.58 lbs./ft. 2 2 R lbs./ft. R225DKB 6.37 lbs./ft. 27" 2 T 16 R lbs./ft. R250DKB 7.34 lbs./ft. 30"

17 Phone: Fax: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Return Closed Ends for Ramps Return closed ends provide an attractive finished appearance to ramps. They are available in several lengths and can be trimmed to accommodate any size ramp assembly. RCE s are also available with slip-resistant SIA finish. RCE-9 RCE-9DKB RCE-15 RCE-15DKB RCE-21 RCE-21DKB 9" 1 2 left hand return illustrated ADA Compliant Interlocking Ramps 12" RCE-30 (includes RCE extension) RCE-30DKB (includes RCE extension) MATERIALS & FINISHES Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. T17

18 National Guard Products, Inc. The products you count on.the people you trust. Phone: ADA Compliant Interlocking Ramps R lbs./ft. R050DKB 1.87 lbs./ft. R lbs./ft. R075DKB 2.56 lbs./ft. R lbs./ft. R0100DKB 2.99 lbs./ft. Offset R lbs./ft. R0125DKB 3.27 lbs./ft. R lbs./ft. R0150DKB 4.75lbs./ft. 3/ Offset 9" Offset 1 Offset 1 Offset 12" 18" 1 R lbs./ft. R0175DKB 5.46 lbs./ft. 1 3/ Offset 2 R lbs./ft. R0200DKB 6.51lbs./ft. 2" Offset 2 R lbs./ft. R0225DKB 7.30 lbs./ft. 2 Offset 27" R lbs./ft. R0250DKB 8.27lbs./ft. 2 Offset T 18 30"

19 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Slope = 1:12 Illustrations shown at 50% MATERIALS & FINISHES All products pages T18 and T19 Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. ADA Compliant Interlocking Ramps T19

20 National Guard Products, Inc. The products you count on.the people you trust. Phone: Interlocking Ramp Components 3/ Ramps Comply with: Americans with Disabilities Act Accessibility Guidelines (ADAAG) - September 2002 ICC/ANSI A Accessible and Usable Buildings or Facilities Requirements: Maximum Threshold Height = 1/2 Thresholds above 1/4 must be beveled with a slope no greater than 1:2 Height changes over 1/2 requires use of a ramp with slope not steeper than 1:12 The rise for any ramp run shall be 30 inches maximum R50.94 lbs./ft. R50DKB.94 lbs./ft. 3" lbs./ft. 953DKB.69 lbs./ft. illustrations shown at 50% 1 3" lbs./ft. 955DKB.71 lbs./ft. 1 3/ All products this page When installed as part of interlocking ramp assembly. 3" lbs./ft. 951DKB.71 lbs./ft lbs./ft. 960DKB 1.76 lbs./ft lbs./ft. 954DKB 1.12 lbs./ft. 2" lbs./ft. 957DKB.93 lbs./ft. 961 lbs./ft. 961DKB lbs./ft lbs./ft. 962DKB lbs./ft. 3" lbs./ft. 959DKB.79 lbs./ft. T 20

21 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Aluminum Ramps lbs./ft. 654DKB.53 lbs./ft. MATERIALS & FINISHES All aluminum ramps this section Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. Aluminum Ramps lbs./ft. 657DKB.86 lbs./ft lbs./ft. 658DKB.80 lbs./ft. when used with 657 Interlocking Rubber Ramps Supplied with beveled ends - (end slope = 1:2). Specify if straight cut is required. Rubber ramp sections may be combined with aluminum ramp components for higher rises, or with 6 flat aluminum interlocking threshold #957 for various offset conditions. Black silicone adhesive available to secure ramps without fasteners. Specify RR5007BL, each tube will secure 2 ramps 12 wide x 36 long (6 square feet.) RR lbs/ft. maximum length = " 1/8" Slope = 1:12 Illustrations shown at 50% RR lbs./ft. maximum length = 120 1/8" T21

22 National Guard Products, Inc. The products you count on.the people you trust. Phone: Threshold Assembly Parts Threshold Assembly Parts Assembly parts allow you to choose from various height and/or width components to build custom thresholds to meet special job requirements. Select the proper height edge parts. Select the appropriate center plates to obtain the width needed. Plates may be butted together or ripped to make various widths. Support the center plates with bar stock supports at joints and additional support for wider assemblies. Assembly plates may be used fluted or smooth side up. Slip-resistant SIA finish can be applied to all parts. Assembly parts may be furnished separately for field assembly or welded into one piece units in our fabrication shop. They are supplied undrilled unless a template is provided. Ripping and beveling options are available. All custom fabricated assemblies have a tolerance of +/- 1/16. If welded assembly is desired, specify welded. 2" 3" lbs./ft 8142DKB.50 lbs./ft lbs./ft 8143DKB.75 lbs./ft lbs./ft 8144DKB 1.00 lbs./ft lbs./ft 8145DKB 1.20 lbs./ft 8168N neoprene.11 lbs./ft 6 1/8" lbs./ft 8146DKB 1.50 lbs./ft All products this page 7" lbs./ft 8147DKB 1.70 lbs./ft 8" lbs./ft 8148DKB 2.00 lbs./ft MATERIALS & FINISHES Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish lbs./ft 8149DKB 2.20 lbs./ft 9" lbs./ft 8150DKB 2.40 lbs./ft All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. 3" lbs./ft 8163DKB.75 lbs./ft lbs./ft 8164DKB 1.00 lbs./ft 3" lbs./ft 8167DKB 1.76 lbs./ft 7" illustrations shown at 50% lbs./ft 8170DKB 2.33 lbs./ft 9. T 22

23 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Edge Parts 1 1/8" 1/8" lbs./ft. 8134DKB.63 lbs./ft lbs./ft. 8139DKB.44 lbs./ft. 1 3/ lbs./ft. 8141DKB.34 lbs./ft. Bar Stock 2" 3" 3/ used as support under threshold assemblies BAR2 BAR4 BAR1 1/8" 5/1 1 3/ BAR3 3/ 1 1/8" lbs./ft. 1/8" lbs./ft. 8136DKB.30 lbs./ft lbs./ft. 8137DKB.26 lbs./ft. 1 3/ lbs./ft. 8151DKB.32 lbs./ft. 5/8" 1/8" lbs./ft. 8133DKB.31 lbs./ft. 2" Transition Strip 2" lbs./ft. 8132DKB.28 lbs./ft. 1 3/ lbs./ft. 8140DKB.28 lbs./ft. 1 3/ lbs./ft. 8152DKB.44 lbs./ft. All products this page 1/8" Heavy Duty - for transition at edge of 1/8 vinyl tile Protects edge of tile Reduces tripping hazard Available in 96 length only 3/ Threshold Assembly Parts Transition Strip 5/1 BAR5 1 Specify required fasteners T 23

24 National Guard Products, Inc. The products you count on.the people you trust. Phone: Aluminum Cover Plates Aluminum Cover Plates All cover plates are custom made to order; non-returnable, non cancelable once fabricated. Great for expansion joint covers or anywhere extra width and strength are required. Manufactured through a rolled process providing extra durability. PVC coating applied to protect the finish during shipping and installation. Minimum width - 2 on 818, 3 on 814 and 4 on 838. Edges are beveled unless otherwise specified. Plates come undrilled although custom drilling is available with your detail. #10 x 1 1/2 wood screws are supplied as standard. If welding is required, use either 814 or /8 Maximum 48" Maximum width 48 Maximum length 144 All products this page MATERIALS & FINISHES Aluminum mill finish DKB - Aluminum dark bronze finish Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. 1/8" 814 1/4 Maximum 48" Maximum width 48 Maximum length /8 Maximum 48" Maximum width 48 Maximum length 144 Stainless Steel Cover Plates Stainless Steel Cover Plates #304 Stainless steel material, mill finish #2B Optional finishes: Polished (US32, 629) suffix POL, Brushed (US32D, 630) suffix Brushed PVC coating applied to protect the finish during shipping and installation. Square cut edges furnished standard. Specify if beveled edge is required. Plates come undrilled although custom drilling is available with your detail. Minimum width 3 on 818SS and 4 on 814SS. 818SS 1/8 814SS 1/4 Maximum width 2 Maximum 48 Maximum length 144 Maximum width 2 Maximum 36 Maximum length 96 Slip Resistant SIA Finish Available with for better traction and slip resistance. Specify SIA finish. 1/8" BAR2SS 1/8" BAR6SS 2" Beveling available at extra charge T 24

25 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Diamond Tread Plate 1/8 thick bright-finish aluminum Edges beveled unless otherwise specified Provided undrilled, unless a custom drilling detail is provided #10 x 1 1/2 wood screws are supplied as standard Minimum width 2 Great for use as cover plate for expansion joint, custom ramps, bulkhead saddle, or custom threshold. Welding not recommended. Bar or custom supports may be shipped loose. This item is made to order and is non-returnable and non-cancelable once fabricated. 828 Safety Tread Plates Maximum width 48 Maximum length 144 Non-slip abrasive tread material is a blend of carborundum and aluminum oxide, bonded and locked into the aluminum tread base. Treads exceed ADA requirements for coefficient of friction tested to ASTM F and MIL-D-23003A. The coefficient of friction for NGP safety tread plates is.94 dry and.86 wet. Furnished undrilled, unless a template is provided. May be used with edge parts (page T23) Can be furnished separate for field assembly, or welded into one piece unit. Carborundum and Treads can NOT be ripped to narrower width. Safety treads are manufactured to order and are non-cancelable and aluminum oxide non-slip non-returnable. abrasive tread. Diamond Tread Plate Safety Tread Plates 10" lbs./ft. 3510DKB 4.15 lbs./ft. Mill finish aluminum with black tread DKB = dark bronze finish aluminum with dark brown tread lbs./ft. 3504DKB 1.6 lbs./ft. T25

26 National Guard Products, Inc. The products you count on.the people you trust. Phone: Safety Tread Stair Nosing Safety Tread Stair Nosings Non-slip abrasive tread material is a blend of carborundum and aluminum oxide, bonded and locked into the aluminum tread base. Treads exceed ADA requirements for coefficient of friction tested to ASTM F and MIL-D-23003A.The coefficient of friction for NGP stair nosings is.94 dry and.86 wet. Furnished drilled and countersunk for screws, except 3231 and 3241 which have hook anchor designed for installation into wet concrete. Furnished standard with #14 x 1 1/2 stainless steel wood screws. Specify if other screws and anchors required. Stair nosings are manufactured to order and are non-cancelable and non-returnable. Renovation Nosings lbs./ft. 3509DKB 3.75 lbs./ft. 9" lbs./ft. 3511DKB 4.7 lbs./ft. Mill finish aluminum with black tread DKB = dark bronze finish aluminum with dark brown tread lbs./ft. 3235DKB 1.0 lbs./ft. 3" Safety Nosings Designed for new construction: poured concrete,terrazo or Steel Pan cement filled stairs. Continuous hook anchor. Not drilled, no screws provided lbs./ft. 3231DKB 1.05 lbs./ft. 3" 3/ lbs./ft. 3241DKB 1.35 lbs./ft. 3/ Carborundum and aluminum oxide non-slip abrasive tread. T26

27 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Cast Aluminum Thresholds With Abrasive Surface STANDARD FASTENERS - #14 Stainless steel wood screws x expansion shields STOCK LENGTHS - 36, 48, 72 (recommend combining for longer lengths) Saddle type with fluted abrasive surface (flute details may vary slightly) Panic type with solid abrasive surface Drilled 6 from each end to allow field cutting or notching Other profiles and sizes available on special order - Consult Factory Cast Threshold dimensions shown below are nominal. Tolerance +/- 1/16. All products this page Cast Thresholds 5/ lbs./ft lbs./ft. 5/ lbs./ft lbs./ft lbs./ft lbs./ft. T 27

28 National Guard Products, Inc. The products you count on.the people you trust. Phone: Interlocking Thresholds/Hook Strips 7/8" lbs./ft lbs./ft lbs./ft. 895DKB.76lbs./ft Typical Wall Thresholds and Hook Strips this page Hook Strips Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") lbs./ft. 3 9/1 80 hook strip provided with all interlocking thresholds. Other hook strips may be specified at additional cost. Typical wall lbs./ft. 440B.66lbs./ft. 1 3/ 9/1 Typical wall /1 7/8" Typical W lbs./ft. 1 Typical Wall lbs./ft lbs./ft. Water Return 1 Water Return 3 Aluminum pan optional - Al please i specify t Aluminum pan optional - please specify 3/ 5/8" lbs./ft. 1-1/8 Typical Wall.109 Typical Wall.063 5/8" 123A.13lbs./ft. 123B.13lbs./ft. 123DKB.13lbs./ft. 1 1/8" lbs./ft. 432DKB.17lbs./ft. Apply to any saddle threshold #10 self-tapping machine screws furnished T 28

29 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Floor Closer Covers Thresholds can be fabricated for use with any floor closer. They are available in aluminum, bronze, or stainless steel in several finishes including slip resistant (SIA) finish. When ordering specify the following: Type x number (i.e.type 3 x 427E) Material and finish Door opening width Door thickness if other than 1 3/4 Handing (Door Handing) Closer manufacturer Closer model number Type 1 For center hung single acting or double acting. Ends not mitered. Floor Closer Covers TYPES 1, 3, & 4 ALUMINUM ARCHITECTURAL BRONZE 1/2 x 7 427E 427BR 1/2 x 8 428E 428BR 1/4 x BR 1/4 x BR 1/2 x 9 429E 1/2 x E 1/4 x /4 x Type 3 For offset hung. Both ends mitered. TYPE 5 ALUMINUM ARCHITECTURAL BRONZE Type 4 For center hung single acting or double acting. Both ends mitered. 1/2 x 7 x 4 427E x 424E 427BR x 424BR 1/4 x 7 x x BR x 413BR 1/2 x 8 x 5 428E x 425E 428BR x 425BR 1/4 x 8 x x BR x 513BR Other thresholds and assembly parts may be prepped for floor closers. Consult factory for custom layouts or applications. Special Finishes available Polished suffix POL Dark oxidized bronze (US10B) suffix DKB Slip-resistant SIA (Slick It Ain t) suffix SIA Stainless Steel available Specify type x stainless steel threshold model number #304, Mill finish #2B Optional Finishes: Polished (US32, 629) suffix POL Brushed (US32D, 630) suffix Brushed Type 5 For offset hung. Both ends mitered. All products this page T 29

30 National Guard Products, Inc. The products you count on.the people you trust. Phone: Residential Thresholds 21.28lbs./ft. 21DKB.28lbs./ft. Typical Wall /8" 11/1 Typical Wall lbs./ft. 23DKB.36lbs./ft. 1 3/1 12V.31lbs./ft. 12VDKB.31lbs./ft. 1 1/8" vinyl Bumper Seal Seals against the door providing weather resistanc Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") lbs/ft. 25DKB.33 lbs/ft. 3 5/1 All thresholds this section Vinyl Top Thresholds Typical Wall.047 3/ Typical Wall lbs./ft. 20DKB.40lbs./ft lbs./ft. 30DKB.50lbs./ft. 3 MATERIALS & FINISHES Typical Wall.094 3/ Aluminum mill finish DKB - Aluminum dark bronze finish lbs./ft. 405DKB.74lbs./ft. 3 Slip Resistant SIA Finish All thresholds are available with our slip resistant, non-skid finish for better traction. Suffix SIA. Typical Wall lbs./ft. 406DKB.85lbs./ft DKB For extra high carpet 1-1/2 to top of vinyl 1 1/8" FASTENERS #10 x 1-1/2 FH zinc plated wood screws are included on mill finish thresholds. Zinc plated antique bronze finish screws are provided to match DKB finish. VINYL FOOT SEAL used instead of caulking to increase the weather resistance of the threshold. Specify on order T30

31 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Stop Strips 7/ lbs./ft. 2DKB.160lbs./ft #6 self-tapping machine screw provided 700E.20lbs./ft. 700EDKB.20lbs./ft. #10 self-tapping machine screw provided 9/ lbs./ft. 4DKB.134lbs./ft. #6 self-tapping machine screw provided 1 1/8" 3/ lbs./ft. 8136DKB.30lbs./ft. #10 self-tapping machine screw provided All stop strips this section Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") Pile insert not available Stop Strips, Elevators, RCE, Anchors Elevators All elevators this section Return Closed Ends Elevators are used under thresholds to increase the rise of the threshold or accommodate offset floor conditions lbs./ft lbs./ft. 58DKB.16lbs./ft. RCE s on mitered ends are offered as an option to most beveled edge thresholds. The threshold is miter cut on a 45 o angle and returned to the face of the frame for a neat, clean and finished appearance to the opening. Specify RCE. Threshold Anchor Avoid drilling concrete by specifying a 720 or 721 threshold anchor. These anchors are set when the concrete is poured; allowing the most secure installation. When ordering your thresholds, note: drill for 720 or 721 anchor. 720 Aluminum-coated for corrosion resistance 721 Aluminum 2 1 3/ ADJUSTABLE NUT HOLDER T31

32 National Guard Products, Inc. The products you count on.the people you trust. Phone: Stainless Steel 1/4 Thresholds Stainless Steel 1/4 Saddle Thresholds Widths and heights other than shown are available upon request. Stainless Steel Thresholds are type #304, mill finish #2B Return Closed Ends are available - see page T31 Optional Finishes: Polished, US32, 629 Brushed, US32D, 630 Slip-resistant suffix POL suffix Brushed suffix SIA Typical Wall.120 All thresholds this page FASTENERS #10 x -1-1/2 FH stainless steel wood screws 413SS 1.65 lbs./ft. Typical Wall SS 2.07 lbs./ft. Typical Wall SS 2.50 lbs./ft. Typical Wall.120 7" 713SS 2.95 lbs./ft SS 3.38 lbs./ft SS 3.81 lbs./ft SS 4.25 lbs./ft. 10 T 32

33 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Stainless Steel 1/2 Saddle Thresholds Widths and heights other than shown are available upon request. Stainless Steel Thresholds are type #304, mill finish #2B Return Closed Ends are available - see page T31 Optional Finishes: Polished, US32, 629 Brushed, US32D, 630 Slip-resistant 412SS 1.65 lbs./ft. suffix POL suffix Brushed suffix SIA Typical Wall.120 All thresholds this page FASTENERS #10 x -1-1/2 stainless steel wood screws Stainless Steel 1/2 Thresholds 512SS 2.07 lbs./ft. Typical Wall SS 2.50 lbs./ft. Typical Wall.120 Typical Wall SS 812SS 912SS 1012SS 2.95 lbs./ft lbs./ft lbs./ft lbs./ft. 7" T 33

34 National Guard Products, Inc. The products you count on.the people you trust. Phone: Stainless Steel Cover Plates Stainless Steel Bumper Thresholds Stainless Steel Bumper Seal Thresholds #304 stainless steel, mill finish #2B Optional finishes: Polished (US32, 629) suffix POL Brushed (US32D, 630) suffix Brushed Slip-resistant suffix SIA 5/8" 896SS 2.83 lbs./ft. 883SS 2.65 lbs./ft. 884SS 2.62 lbs./ft. Stainless Steel Cover Plate 2" 5 3 Typical Wall.120 Typical Wall.120 Typical Wall.120 #304 Stainless steel material, Mill finish #2B Optional finishes: Polished (US32, 629) suffix POL Brushed (US32D, 630) suffix Brushed PVC coating applied to protect the finish during shipping and installation. Square cut edges furnished standard. Specify if beveled edge is required. Plates come undrilled although custom drilling is available with your detail. Minimum width 3 on 818SS and 4 on 814SS. 818SS 1/8 Maximum 2 width Maximum 48 Maximum length 144 OPTIONAL BUMPER SEAL All products this page Seals against the door providing weather resistance. For adhesive mounted silicone bumper seal suffix S Slip Resistant SIA Finish Available for better traction and slip resistance. Specify SIA finish. Beveling available at extra charge 1/8" 814SS 1/4 Maximum 2 width Maximum 36 Maximum length 96 T34 / BAR2SS 1/8" BAR6SS 2"

35 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Architectural Bronze Stop Strips 5/1 2BR.46 lbs/ft. #6 self-tapping machine screw provided 9/1 4BR.405 lbs/ft. Architectural Bronze Carpet Dividers 404BR 2.09 lbs./ft. 418BR 1.00 lbs./ft. 1 3/ Brass Cover Plate 818BR #6 self-tapping machine screw provided 417BR 48" Maximum width 36 Maximum length 96 #360 Brass, mill finish Optional finishes: Polished (similar to US3) suffix POL Dark oxidized (similar to US10B) suffix DKB Manufactured through a rolled process providing extra durability. PVC coating applied to protect the finish during shipping and installation Beveled edges furnished standard. Specify if square cut edges are required. Plates come undrilled although custom drilling is available with your detail. Minimum width 3 Welding not recommended - Consult factory 1.45 lbs./ft. 2 Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") Pile insert not available All products this page Slip Resistant SIA Finish Available for better traction and slip resistance. Specify SIA finish. 1/8" Architectural Bronze Stop Strips, Carpet Dividers Brass Cover Plate T35

36 National Guard Products, Inc. The products you count on.the people you trust. Phone: Architectural Bronze Saddle Thresholds Architectural Bronze 1/4 Saddle Thresholds 411BR 1.42 lbs./ft. 413BR 1.52 lbs./ft. 513BR 1.96 lbs./ft. 3" 5 " All thresholds this page Extruded Architectural Bronze satin finish (720) similar to US4. Optional finishes: Polished (721) suffix POL Dark oxidized (722) similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA FASTENERS #10 X 1-1/2 solid brass wood screws furnished. Antique bronze finish screws provided with dark bronze thresholds. 613BR 3.06 lbs./ft. 713BR 3.62 lbs./ft. 7" 813BR 4.60 lbs./ft. 8" T36

37 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Architectural Bronze 1/2 Saddle Thresholds 424BR 2.28 lbs./ft. 425BR 2.84 lbs./ft. 426BR 3.33 lbs./ft. 5 " All thresholds this page Extruded Architectural Bronze satin finish (720) similar to US4. Optional finishes: Polished (721) suffix POL Dark oxidized (722) similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA Elevator 58BR 1.34 lbs./ft. not barrier-free Architectural Bronze Saddle Thresholds 428BR 5.06 lbs./ft. 8" 429BR 4.27 lbs./ft. 9" 427BR 4.09 lbs./ft. 7" 430BR 4.78 lbs./ft. 10" T 37

38 National Guard Products, Inc. The products you count on.the people you trust. Phone: Architectural Bronze Bumper Seal Thresholds Architectural Bronze Bumper Seal Thresholds Extruded Architectural Bronze satin finish (720) similar to US4. Optional finishes: Polished (721) suffix POL Dark oxidized (722) similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA 896BR 1.94 lbs./ft., All products this page FASTENERS #10 X 1-1/2 solid brass wood screws furnished. Antique bronze finish screws provided with dark bronze thresholds. 5/8" 3/ Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") Pile insert not available 890BR 2.49 lbs./ft. 884BR 2.47 lbs./ft. 883BR 2.52 lbs./ft. 7/8" T38

39 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Architectural Bronze Half-Saddle Thresholds 2" 215BR.76 lbs./ft. 315BR 1.56 lbs./ft. 2" 321BR 1.01 lbs./ft. 3" 415BR 1.88 lbs./ft. Not intended for insert Not intended for insert All products this page Extruded Architectural Bronze satin finish (720) similar to US4. Optional finishes: Polished (721) suffix POL Dark oxidized (722) similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA when installed where the nonbeveled edge is FLUSH with flooring or where no greater than 1/4 vertical rise occurs. Slip-Resistant SIA finish Available for better traction and slip-resistance. Specify SIA finish. Architectural Bronze Half-Saddle Thresholds 322BR 1.31 lbs./ft. 3" 324BR 3.07 lbs./ft. FASTENERS #10 X 1-1/2 solid brass wood screws furnished. Antique bronze finish screws provided with dark bronze thresholds. 327BR 1.75 lbs./ft. Not intended for insert 3 7/8" 350BR 2.10 lbs./ft. Not intended for insert 4 7/8" 325BR 3.95 lbs./ft. T 39

40 National Guard Products, Inc. The products you count on.the people you trust. Phone: Architectural Bronze Thermal Barrier Saddle Thresholds Architectural Bronze Thermal Barrier Saddle Thresholds 8424BR 2.08 lbs./ft. 8425BR 2.46 lbs./ft. 8426BR 2.84 lbs./ft. 8427BR 3.23 lbs./ft. 5 " 7 " All Thresholds this Page Extruded Architectural Bronze satin finish (720) similar to US4. Optional finishes: Polished (721) suffix POL Dark oxidized (722) similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA 8428BR 3.62 lbs./ft. 8" 8429BR 4.16 lbs./ft. 9" 8430BR 4.70 lbs./ft. 10" T 40

41 Phone: Architectural Bronze Thermal Barrier Bumper Seal Thresholds Extruded Architectural Bronze satin finish (720) similar to US BR 2.71 lbs./ft. 8435BR 3.09 lbs./ft. 8436BR 3.47 lbs./ft. NATIONAL GUARD PRODUCTS, INC. Optional finishes: Polished (721) suffix POL Dark oxidized (722) similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA FASTENERS #10 X 1-1/2 solid brass wood screws furnished. Antique bronze finish screws provided with dark bronze thresholds. 7/8" THRESHOLDS 7/8" Bumper Seal Seals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") Silicone ("S") Pile ("P") 7/8" Architectural Bronze Thermal Barrier Bumper Seal Thresholds 7/8" 8437BR 5.06 lbs./ft. 7" T 41

42 National Guard Products, Inc. The products you count on.the people you trust. Phone: Architectural Bronze Interlocking Thresholds Architectural Bronze Interlocking Thresholds 442BR 2.01 lbs./ft. 895BR 2.06 lbs./ft. 473BR 1.54 lbs./ft /8" 1 4 " 5/8" 7/8" 83BR Typical wall.024 7/8" 80B Supplied Standard with Threshold All products this page Bronze Hooks Extruded Architectural Bronze satin finish (720) similar to US4. 81B.015 Typical wall Optional finishes: Polished (721) suffix POL Dark oxidized (722) similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA 483BR 1.80 lbs./ft. 3 Aluminum pan optional - please specify 3/ FASTENERS #10 X 1-1/2 solid brass wood screws furnished. Antique bronze finish screws provided with dark bronze thresholds. 7/8" Bumper Seal Seals against the door providing weather resistance 484BR 1.83 lbs./ft. 4 " Aluminum pan optional - please specify Vinyl ("V") supplied unless other material is specified 432BR #10 self-tapping machine screws furnished Apply to any saddle threshold Options: Neoprene ("N") Silicone ("S") Pile ("P") 1 1/8" T42

43 Phone: NATIONAL GUARD PRODUCTS, INC. THRESHOLDS Architectural Bronze Assembly Parts 1 3/ 8140BR.82 lbs./ft. 1 3/ 8141BR 1.10 lbs./ft. 2" 8142BR 1.30 lbs./ft. 8143BR 2.07 lbs./ft. 3" 3/ 1 1/8" 8136BR.89 lbs./ft. 2" 8139BR 1.25 lbs./ft. 3" All products this page Assembly parts allow you to choose from various height and/or width components to build custom thresholds to meet special job requirements. Select the proper height edge parts. Select the appropriate center plates to obtain the width needed. Plates may be butted together or ripped to make various widths. Support the center plates with bar stock supports at joints and additional support for wider assemblies. Assembly plates may be used fluted or smooth side up. Slip-resistant SIA finish can be applied to all parts. Assembly parts may be furnished separately for field assembly or welded into one piece units in our fabrication shop. They are supplied undrilled unless a template is provided. Ripping and beveling options are available. All custom fabricated assemblies have a tolerance of +/- 1/16. Extruded Architectural Bronze If welded assembly is desired, specify welded. satin finish (720) similar to US4. Bar Stock 1/8" 3/ BAR1BR BAR4BR Optional finishes: Polished (721) suffix POL Dark oxidized (722)similar to US10B suffix DKB Polished with Forever Finish, matches US3 (available up to 42 ), suffix POL-Forever Slip-resistant, suffix SIA used as support under threshold assembly parts BAR2BR 5/1 BAR3BR 1 Architectural Bronze Threshold Assembly Parts BAR5BR 5/ BR 2.88 lbs./ft. 8145BR 3.70 lbs./ft. 8146BR 4.25 lbs./ft. 6 1/8" T 43

44 National Guard Products, Inc. The products you count on. The people you trust. Phone: Corporate Headquarters National Guard Products, Inc E. Raines Road Memphis, TN Mailing Address P.O. Box Memphis, TN Sales Representatives 1. IRST of New England PO Box Wexford Street Needham Heights, MA PH: (781) FAX: (781) Dugan associates 6800 Pittsford-Palmyra Rd. Suite 330 Fairport, NY PH: (585) FAX: (585) Paul J. Polke Company 628 Route 10, Unit 1 Whippany, NJ PH: (973) (800) FAX: (973) Mid-Atlantic agents 109 John Robert Thomas Dr. Exton, PA PH: (610) FAX: (610) Frazier Commercial sales Rolling Fork Way Gaithersburg, MD PH: (301) FAX: (301) D.H. Bruch Marketing 352 Crompton Street Charlotte, NC PH: (704) FAX: (704) Phillips-Langley associates 3585 Lawrenceville-Suwanee Rd., Suite 401-A Suwanee, GA PH: (770) FAX: (770) Architectural Marketing associates 648 Florida Central Parkway Longwood, FL PH: (407) FAX: (407) Barrett Group 6170 Centre Park Drive West Chester, OH PH: (513) (800) FAX: (513) Hardware agents 5355 Northland Drive, NE, Suite C Grand Rapids, MI PH: (616) FAX: (616) Baines Builders Products P.O. Box 783 Carmel, IN PH: (317) FAX: (317) Crenshaw sales P.O. Box 46 LaGrange, TN PH: (901) FAX: (901) Donald A. Loss & Associates 3603 West Oklahoma Avenue Milwaukee, WI PH: (414) FAX: (414) Life Safety Hardware Consultants 908 Huntsmoor Drive Frankfort, IL PH: (815) FAX: (815) D.L. Neuner Company 3015 S. Brentwood Boulevard St. Louis, MO PH: (314) (800) FAX: (314) Combs & associates 6190 Olson Memorial Highway Golden Valley, MN PH: (763) FAX: (763) Patterson sales 1966 Linn Street North Kansas City, MO PH: (816) FAX: (816) D.L. Collins 18. associates 2231-A Michigan Avenue Arlington, TX PH: (817) FAX: (817) D. L. Collins associates 2231-A Michigan Avenue Arlington, TX PH: (817) FAX: (817) D.L. Collins associates Desert Springs Circle Houston, TX PH: (281) FAX: (281) R.J. Porter & Associates PO Box Lakewood, CO PH: (303) FAX: (303) The Clark agency S. 33rd Place Phoenix, AZ PH: (480) FAX: (480) IRST of the Mountain states 300 Mercer Way Salt Lake City, UT PH: (801) FAX: (801) IRST of the Northwest th Avenue, NE, Suite 101 Bothell, WA PH: (425) FAX: (425) R.P. Boxman & Associates 6689 Owens Drive #200 Pleasanton, CA PH: (925) FAX: (925) IRST of so. California 488 E. Santa Clara Street, Suite 101 Arcadia, CA PH: Fax: Donald Tucker, int l Rep 348 Amador Avenue Ventura, CA (PO Box 4470, 93007) PH: (805) FAX: (603) Canadian distribution Center K.M. Thomas Company 360 Carlingview Drive Toronto, ON M9W 5X9 PH: FAX: copyright NGP