Medan double bed Stock number:

Transcription

1 Medan double bed Stock number: H0 W46 D206.6cm

2 Thank you for purchasing the Medan double bed. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great design to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have. The John Lewis Team Tools required Time to assemble 40 Minutes People to assemble

3 Important safety information Warnings The product should only be used on firm, level ground. Keep small parts out of reach of children. Ensure the product is fully assembled as illustrated before use. Do s Check the pack and make sure you have all the parts listed. Check all screws or bolts are tightened and inspect regularly. Make sure the legs remain in contact with the ground at all times. Don ts Do not over tighten screws or bolts. Do not stand on the product. Do not use power tools to construct as overtightening and panel failure may occur

4 Your bed Ref Description Qty 2 Headboard Footboard Side rails 2 4 Centre rail 5 Slats 28

5 Fixtures and fittings Fixtures and fittings supplied (not actual size) Ref Description Dimensions Qty A Screw M4 x 5mm 0 B Centre bracket 2 C Side slat cap 28 D Centre slat cap 4 4

6 Product assembly Medan double bed Step Parts, fittings and tools 2 A B 2 A B Step 2 Parts, fittings and tools 5

7 Medan double bed Step Parts, fittings and tools 4 A A 4 Step 4 Parts, fittings and tools 4 5 C D C 5 D 5 4 6

8 Medan double bed Step 5 Ready to use 7

9 Care guide Care and maintenance Wood furniture Wood displays different grain patterns depending on which way they are cut - for example, the medullary ray which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic. Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer fronts by the way slivers are arranged. How to care for your wood furniture Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth. Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre. Spray polishes are best avoided as they contain silicones which may spoil the furniture s surface when building up over time. Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home heating can cause damage such as warping. Safety instructions Never drag furniture when moving it. Always lift it. Periodically check all fixings to ensure none have come loose and retighten when necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. During assembly children should be kept away from the product due to possible risk of injury. Do not use this item if any components are missing or damaged. It is recommended that before moving heavy objects to a new location they are completely dis-assembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. This product complies with BS EN 725:998. If you require any additional information or have any issues with this product please call the John Lewis helpline on If you require spare parts or further technical assistance please call or mail@fwgroup-uk.com. Retain these instructions for future reference. John Lewis Partnership 7 Victoria Street London SWE 5NN johnlewis.com