We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly.

Transcription

1 R USTOMR Thank you for purchasing your new piece of furniture from unelm. We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly. If for any reason you feel we haven t lived up to the high standards we set ourselves, please don t hesitate in contacting us on where our team will be very keen to understand what has gone wrong and, more importantly, put it right. R USTOMR The next step There is no need to feel daunted by the number of parts and fittings in front of you, we have compiled this straight forward, step-by-step guide to make sure that assembling your furniture is as easy as 1, 2, 3. efore you begin, we advise that you check that you have everything you need to get started. TOP TIP Find a space to spread these out across the floor before you begin assembling them. Lay each panel down in position, ready to build. It is recommended that two people assemble this product together. The full list of furniture parts, fixtures and fittings, as well as the tools you will need for assembly, can be found on page 2 and 3 of this manual. TOP TIP Identify all of the fittings, make sure that you have them all prepared and familiarise yourself with each component, to make things easier when you are putting it all together. Safety and are dvice IMPORTNT - The first step you need to take is to ensure your safety! Please take the time to read and understand these instructions before assembling your furniture. Keep children and animals away from the assembly area. This furniture contains small parts that could cause choking if swallowed. Keep all plastic wrapping materials way from children to avoid danger of suffocation. nsure that all packaging is disposed of carefully and responsibly. Make sure that you allow enough space to move around when assembling your furniture.

2 FNTON NST 2 TLS

3 Parts & Fittings for the FNTON NST 2 TLS Panel - exploded view

4 Panels - plan view 2 360x46mm 3 360x46mm 1 Table Top 520 x 450mm 6 7 Table Top 260x46mm 350 x 350mm 4 Standing Table 552x65mm 5 Standing Table 552x65mm 8 190x46mm 9 260x46mm x46mm x46mm 11 Standing Table 472x65mm 12 Standing Table 472x65mm 14 Standing Table 15 Standing Table 552x65mm 552x65mm 24

5 Fittings 8X25mm Wooden dowel x 30 3,5x30 screw x 30 llen Key x 01 50mm screw 7x90 x 16 8X40mm Wooden dowel x 16 Tools required efore you start heck the pack and make sure you have all the parts listed above. If not, contact the helpline on who will be able to help you. When you are ready and sure that you have the right tools to hand, you will need plenty of space and a clean dry area for assembly. Ready? Follow this step-by-step guide ross slot screwdriver Hammer Tape measure The use of power tools to assemble the product is not recommended due to the risk of over tightening fixings 1 LRG mm 03 (3x) 13 8X25mm Wooden dowel x 14 8X40mm Wooden dowel x 08 5

6 2 LRG mm screw x 02 llen Key x 01 50mm screw 7x90 x 04 3 LRG mm screw x 04 llen Key x 01 50mm screw 7x90 x 04 6

7 4 LRG 01 30mm screw x 08 5 SMLL 10 mm X25mm Wooden dowel x 16 8X40mm Wooden dowel x 08 7

8 6 SMLL mm screw x 04 llen Key x 01 50mm screw 7x90 x 04 7 SMLL llen Key x 01 50mm screw 7x90 x 04 30mm screw x 04 7

9 8 SMLL 01 30mm screw x

10 Product information eing a natural product, each piece of wood will be unique in shape, grain-structure, colour irregularities and the presence of various sizes of knots are the natural results of the growth of the trees. Therefore, variations in colour, grain-pattern and appearance should be expected as part of the individual characteristics of this furniture. Knotting is the most common of markings and is the fingerprint of nature wood. These vary in size and occur frequently in natural wood products. The Fenton range has a manufactured rough sawn finish technique to give a rustic and raw uniqueness no two pieces will be the same. These features include: are lean the product with a soft, clean, damp cloth, then buff with a clean, dry cloth. o not scrub the surface when cleaning, clean gently. o not use abrasive cleaning products or those containing silicone. ny spills should be removed immediately with a soft, clean, damp cloth and dried. nsure the product is protected with mats and coasters when items are placed on the surface, to prevent scratching or damage. o not put hot dishes directly onto the surface of the product. void keeping furniture in direct sunlight or close to any heat sources, as this can cause cracking, discolouration or warping. Never drag pieces of furniture across the floor, as this will cause damage to the joints. ll assembly fixings should be tightened properly and be checked periodically and tightened if necessary. This product should not be discarded with household waste. Take to your local authority waste disposal centre. Finally, we hope you enjoy your furniture for many years to come and thanks again for your purchase. dunelm.com dunelm.com 10