Dock Floats, Hardware & Building Components

Transcription

1 Dock Floats, Hardware & Building Components Product Catalog BARR Plastics Inc barrplastics.com

2

3 Table of Contents barrplastics.com Table of Contents Dock Floats & Building Components Raise the BARR & (Re)Build. Dock Floats Standard Foam-Filled Heavy Duty Foam-Filled Air-Filled DIY Dock Kits & Frames Wooden Aluminum Galvanized Steel Dock Hardware Floating PWC Docks Dock Decking BARR Dock-n-Walk Thruflow Dock Edging & Bumpers Dock Accessories Pile Hoops & Holders Dock Cleats Pile Caps Dock Ladders Dock Boxes Dock Wheel Guides Marine Buoys Standard Mooring Marker & Regulatory Heavy Duty Commercial Mooring Industrial Floats & Pontoons

4

5 barrplastics.com Dock Floatation Standard Foam-Filled Dock Floats It s time to build an unsinkable dock with BARR s vast line of EPS foam-filled dock floats. ACOE-approved with an industry-leading 15 year warranty, our standard dock floats are resistant to UV rays and damage by animals, ice, bumps by watercraft and contact deterioration from petroleum products. With a one piece roto-molded polyethylene shell, they re relatively lightweight and are highly cost effective compared to concrete systems. Extra wide ribbing on the exterior of the floats provides easier tool access during install and tank tested buoyancy ratings are +0/-5%. 1

6 2 Foot Series Part # Size (in) l x w x h Weight (lbs) Buoyancy (lbs) BD x 36 x BD x 36 x BD x 36 x BD x 48 x BD x 48 x BD x 48 x BD x 48 x BD x 48 x BD x 48 x x 36 x x 48 x x 96 x x 96 x x 96 x Foot Series Part # Size (in) l x w x h Weight (lbs) Buoyancy (lbs) BD x 48 x BD x 48 x BD x 48 x BD x 48 x BD x 48 x BD x 72 x BD x 72 x BD x 72 x BD x 72 x BD x 72 x BD x 96 x BD x 96 x BD x 96 x BD x 96 x x 48 x x 48 x x 96 x

7 4 Foot Series Part # Size (in) l x w x h Weight (lbs) Buoyancy (lbs) BD x 48 x BD x 48 x BD x 48 x BD x 48 x BD x 60 x BD x 60 x BD x 60 x BD x 60 x BD x 72 x BD x 72 x BD x 72 x BD x 72 x BD x 72 x BD x 96 x BD x 96 x BD x 96 x BD x 96 x BD x 96 x x 48 x x x 72 x x 120 x Contact BARR Plastics Today! barrplastics.com Additional Sizes Part # Size (in) l x w h Weight (lbs) Buoyancy (lbs) BD x 72 x BD x 72 x BD x 96 x BD x 48 x BD x 48 x BD x 72 x x 72 x x 48 x

8 barrplastics.com Dock Floatation Heavy Duty Foam-Filled Dock Floats (VersaFloat) Like our standard foam-filled dock floats, the heavy duty floats are also resistant to UV rays and damage by animals, ice, bumps by watercraft and contact deterioration from petroleum products. With a blow-molded outer shell constructed of all virgin-grade polyethylene, these heavy duty dock floats are EPS foam-filled and have tank tested buoyancy ratings of +0/-5%. They come with heavy duty mounting flange all around with molded-in slots and thru holes and each float s wall thickness has passed the ASTM Falling Dart Puncture Test so it s durable for years to come. Part # Size (in) l x w x h Weight (lbs) Buoyancy (lbs) VF x 48 x VF x 48 x

9 barrplastics.com Dock Floatation Heavy Duty Boat Lift Air Filled Dock Floats Our heavy duty air-filled dock floats are made from a one piece roto-molded virgin-grade polyethylene outer shell, with a heavy 3/8 wall thickness for structural strength. Molded-in mounting holes in the top and bottom allow water intake and exhaust, while the top of the float drum has molded-in grooves for mounting to lift. Threaded inserts are also included for commercial fittings. As with our other dock floats here at BARR, these boat lift air filled dock floats are resistant to UV rays and damage by animals, ice, bumps by watercraft and contact deterioration from petroleum products. Part # SQ=Square bottom Size (in) l x w x h Weight (lbs) Buoyancy (lbs) AT x 30 x AT SQ 30 x 30 x AT x 30 x AT SQ 30 x 30 x AT x 40 x AT SQ 32 x 40 x AT SQ 32 x 40 x AT SQ 48 x 48 x

10 barrplastics.com DIY Dock Kits Wooden Frame Dock Kits Want to build a top quality deck in record time? Check out our Wooden Frame Dock Kits, the perfect do-it-yourself solution for ambitious on-the-water property owners and skilled contractors alike. The kits come with hot-dipped galvanized steel frame connection hardware, floats and a set of plans to get you started on building the dock that s right for you. Add your lumber framing, decking and accessories, sold separately from BARR, and you re good to go! 6

11 Contact BARR Plastics Today! barrplastics.com Wooden Frame Assembly 7

12 Contact BARR Plastics Today! Standard Frames barrplastics.com Part # Description L (ft) W (ft) 420W OC Floats & Hardware for 4' x 20' Dock, 24" OC W OC Floats & Hardware for 5' x 20' Dock, 24" OC W OC Floats & Hardware for 6' x 20' Dock, 24" OC W OC Floats & Hardware for 8' x 20' Dock, 24" OC W OC Floats & Hardware for 10' x 20' Dock, 24" OC Dock Kits for BARR Dock-n-Walk Decking Part # Description L (ft) W (ft) 320W OC Floats & Hardware for 3' x 20' Dock for BARR Decking, 18" OC W OC Floats & Hardware for 4' x 20' Dock for BARR Decking, 16" OC W OC Floats & Hardware for 5' x 20' Dock for BARR Decking, 15" OC W OC Floats & Hardware for 6' x 20' Dock for BARR Decking, 18" OC W OC Floats & Hardware for 8' x 20' Dock for BARR Decking, 16" OC W OC Floats & Hardware for 10 x 20 Dock for BARR Decking, 15 OC

13 barrplastics.com DIY Dock Kits Aluminum Frame Dock Kits These lightweight, corrosion-resistant aluminum dock kits make creating your own stylish custom standing or floating dock system a breeze. Whether you re a do-it-yourselfer home owner or cottage owner or whether you re a professional contractor, you can easily assemble and install each section, with the option to easily remove them in winter, if necessary. Each 4 x8 or 8 x8 dock frame kit is packaged in a box 8 x 1 x 1/2 for easy and low cost shipping. (Alum. joist kits if purchased are shipped in a separate compact box) 2 x 8 x 8 L lumber can be used as joists instead of the alum. joists. Min. of 1 joist for the 4 wide kits and Min. of 2 for the 8 wide kits. Adjustable telescopic legs - 1-2, 2-4 and 4-8 leg length options. 9

14 4 Leg Frames Joists Sold Separately Part # Description Box Dimensions (in) CD4X8LEG1-2 4' x 8' Dock w/ 1' - 2' 6.5 x 12 x 96 Legs CD4X8LEG2-4 4' x 8' Dock w/ 2' - 4' 6.5 x 12 x 96 Legs CD4X8LEG4-8 4' x 8' Dock w/ 4' x 8' 6.5 x 12 x 96 Legs CD8X8LEG1-2 8' x 8' Dock w/ 1' - 2' 6.5 x 12 x 96 Legs CD8X8LEG2-4 8' x 8' Dock w/ 2' - 4' 6.5 x 12 x 96 Legs CD8X8LEG4-8 8' - 8' Dock w/ 4' - 8' Legs 6.5 x 12 x 96 2 Leg Frames Part # Description Box Dimensions (in) CD4X8QL1-2 4' x 8' Quick Link Dock 6.5 x 12 x 96 Section w/ 1' - 2' Legs CD4X8QL2-4 4' x 8' Quick Link Dock 6.5 x 12 x 96 Section w/ 2' -4' Legs CD4X8QL4-8 4' x 8' Quick Link Dock 6.5 x 12 x 96 Section w/ 4' - 8' Legs CD8X8QL1-2 8' x 8' Quick Link Dock 6.5 x 12 x 96 Sections w/ 1' - 2' Legs CD8X8QL2-4 8' x 8' Quick Link Dock 6.5 x 12 x 96 Sections w/ 2' - 4' Legs CD8X8QL4-8 8' x 8' Quick Link Dock 6.5 x 12 x 96 Sections w/ 4' - 8' Legs CDQLBRKT2 Quick Link Bracket Assembly (Set of 2) N/A Includes 2 Quick Link Brackets. Joists Sold Separately 10

15 Frames For Floats or Ramps Part # Description Box Dimensions (in) CD4X8 4' x 8' Dock Ramp Section 6.5 x 12 x 96 CD8X8 8' x 8' Dock Ramp Section 6.5 x 12 x 96 Joists Sold Separately Contact BARR Plastics Today! barrplastics.com Complete Hexagonal Dock Kits Part # Description CDHEX14X16L1-2 14' x 16' Hexagon Platform w/ 1' - 2' Legs CDHEX14X16L2-4 14' x 16' Hexagon Platform w/ 2' - 4' Legs CDHEX14X16L4-8 14' x 16' Hexagon Platform w/ 4' - 8' Legs CDHEX14X16F 14' x 16' Hexagon Platform - Floating (Floats sold separately) Includes Alum. Joists & Main Frame. Comes assembled in 2 halves. Decking sold separately. 11

16 Aluminum Frame Accessories Part # Description Box Dimensions (in) CD4X8JK 4' x 8' Aluminium Joist Kit 4 x 5 x 96 CD8X8JK 8' x 8' Aluminium Joist Kit 6.5 x 12 x 96 CDRAMP-CP2 Ramp Section Connector Brackets (Set of 2) N/A CDHINGEKIT2 Hinge Kit (Set of 2) N/A CDCRBRKT2 Chain Retainer Brackets (Set of 2) N/A CDTRIPLATE Triangle Backing Plate N/A CDFP Foot Pad N/A CDTK Tightening Knob N/A CDFDCK Floating Dock Connector Kit N/A 12

17 barrplastics.com Pre-Made Dock Frames Galvanized Steel Dock Frames Primarily for use in commercial docking systems, these hot-dipped galvanized steel frame sections can be bolted together with pre-hunched holes and heavy duty frame hinges. Connection hardware pieces are available for connecting multiple sections together. Standard construction is 1.5 x 1.5 x 3/16 angle and 1/2 round bar and heavier duty frames are available with 2 x 2 x 3/16 angle. Frames can be made with either 15, 16, 18 or 24 on center support beams down their length to match support requirements for specific decking products and special custom sizes are also available. 13

18 Steel Frame Sections Part # Description L (ft) W (ft) Weight (lbs) 210S Steel Dock Frame (12" On Center) S Steel Dock Frame (24" On Center) S HD Steel Dock Frame (12" On Center) S HD Steel Dock Frame (24" On Center) S Steel Dock Frame (18" On Center) S HD Steel Dock Frame (18" On Center) S Steel Dock Frame (16" On Center) S Steel Dock Frame (24" On Center) S HD Steel Dock Frame (16" On Center) S Steel Dock Frame (16" On Center) S Steel Dock Frame (24" On Center) S HD Steel Dock Frame (16" On Center) S HD Steel Dock Frame (24" On Center) S Steel Dock Frame (16" On Center) S Steel Dock Frame (24" On Center) S HD Steel Dock Frame (16" On Center) S HD Steel Dock Frame (24" On Center) S Steel Dock Frame (16" On Center) S Steel Dock Frame (24" On Center) S HD Steel Dock Frame (16" On Center) S HD Steel Dock Frame (24" On Center)

19 Contact BARR Plastics Today! barrplastics.com Steel Frame Hardware Part # TF-HF TF-HFD TF-HM TF-HMD Description Truss Frame Hinge-Female Truss Frame Hinge-Double Female Truss Frame Hinge-Male Truss Frame Hing-Double Male Hinge Connectors for Galvanized Steel Dock Frame Sections Non - Hinge Connectors for Galvanized Steel Dock Frame Sections 15

20 barrplastics.com Dock Hardware Our standard hot-dipped, galvanized steel dock hardware is manufactured from 1/4 thick steel while our heavy duty hardware is manufactured from 3/8 thick steel. Using the right materials the first time will ensure you have a dock that will be able to ride out those high winds and choppy waters. All dock hardware is made from 0.5 diameter carriage bolts and can be used with 2-4 thick lumber. Need some help knowing where everything goes? Kits and plans are available--and our experienced staff can help you answer any questions. 16

21 Corner Brackets All galvanized dock hardware is available in standard or heavy duty models unless otherwise noted. Heavy duty part numbers are identified with an -HD at the end. Part # H-OCM / H-OCM-HD H-OCMM / H-OCMM-HD H-OCF /H-OCF-HD H-OCFF / H-OCFF-HD H-OCMF / H-OCMF-HD Description Outside Corner Male Bracket Outside Corner Male-Male Bracket Outside Corner Female Bracket Outside Corner Female-Female Bracket Outside Corner Male-Female Bracket Part # H-IC / H-IC-HD H-OCE / H-OCE-HD Description Inside Corner Bracket Outside Corner Bracket Part # H-CRS* H-ICP3* P-3* *Standard only Description Chain Retainer Inside Corner- 3 I.D Pipe Holder 3 Pipe Holder Holders/Retainers 17

22 Angle Brackets Part # Description H-A / H-A-HD H-CA / H-CA-HD Angle Bracket Cleat Angle Bracket H-A / H-A-HD H-CA / H-CA-HD H-SF / H-SF-HD H-SM / H-SM-HD Single T Brackets Part # H-SM / H-SM-HD H-SF / H-SF-HD Description Single T Male Single T Female Plates Part # H-W / H-W-HD H-B / H-B-HD H-SP * *Standard only Description Washer Plate Backup Plate Splice Plate H-B / H-B-HD H-W / H-W-HD 18 H-SP

23 Fasteners Part # Description Size (in) B Carriage Bolt - Hot-Dipped Galvanized 3/8 x 3 B Carriage Bolt - Hot-Dipped Galvanized 3/8 x 6 B Carriage Bolt - Hot-Dipped Galvanized 3/8 x 8 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 2 1/2 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 3 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 4 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 4 1/2 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 5 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 5 1/2 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 6 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 8 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 9 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 10 B Carriage Bolt - Hot-Dipped Galvanized 1/2 x 12 B Flat Washer - Hot-Dipped Galvanized 3/8 B Flat Washer - Hot-Dipped Galvanized 1/2 B Flat Washer - Hot-Dipped Galvanized 9/16 B Lock Washer - Hot-Dipped Galvanized 3/8 B Lock Washer - Hot-Dipped Galvanized 1/2 B Hex Nut - Hot-Dipped Galvanized 3/8 B Hex Nut - Hot-Dipped Galvanized 1/2 B Hex Head Lag Bolt - Galvanized 3/8 x 4 B Hex Head Lag Bolt - Galvanized 3/8 x 6 B Hex Head Lag Bolt - Galvanized 1/2 x 6 B Hex Head Lag Bolt - Galvanized 1/2 x 8 B Hex Head Lag Bolt - Galvanized 1/2 x 10 B Hex Head Lag Bolt - Galvanized 1/2 x SS Tapping Screw Truss Socket #2 Robertson #10 x 1 Round Head SS Tapping Screw Truss Socket #2 Robertson #10 x 1 1/2 Round Head SS Tapping Screw Truss Socket #2 Robertson #10 x 2 Round Head F-3435B Connector Pin w/click Pin 3/4 x 3 1/2 19 Contact BARR Plastics Today! barrplastics.com

24 barrplastics.com Floating PWC Docks PWC (Jet Ski) Ports Foam-filled PWC Ports are perfect for connecting to commercial or residential fixed or floating docks, as a storage solution for PWCs up to 1500 lbs. With a self-centering roller for easy docking and a slip-resistant surface, there s no better place to store and display your PWCs when not in use. Part # Description L (in) W (in) D (in) PORT-SINGLE Single PWC Dock Port PORT-SKID Skid PWC Dock Port Options available: Tie down cleat with connection kit & heavy duty hardware Tan or Grey Speckle colours Side or front mount 6 rollers standard. Optional side rollers. 20

25 barrplastics.com Dock Decking BARR Dock-n-Walk Decking Custom build your dock with slip resistant decking. BARR s Dock-n-Walk decking is easy to install and requires no maintenance. It s UV-protected, safe for the kids and maintains its high quality for years of fun in the sun. Product Specs Part # Description Colour L (in) W (in) H (in) TH4020GFGY-44 3x4 ft glass reinforced deck panel Grey TH4020GFSA-91 3x4 ft glass reinforced deck panel Sand TH4040GFGY-44 4x4 ft glass reinforced deck panel Grey TH4040GFSA-91 4x4 ft glass reinforced deck panel Sand TH4050GFGY-44 5x4 ft glass reinforced deck panel Grey TH4050GFSA-91 5x4 ft glass reinforced deck panel Sand

26 barrplastics.com Thruflow Decking Dock Decking Thruflow decking is slip-resistant, requires no maintenance and is super easy to install. UV-protected, lightweight, and easy on your feet, this decking is a great choice to help you walk on water. Part # Description Colour L (in) W (in) H (in) TF-M44 16" Support Span psf Maple TF-M5 15" Support Span psf Maple TF-G5 15" Support Span psf Grey TF-C5 15" Support Span psf Cream TF3-G4X4 Interlocking Deck Panel Grey TF-G4 16" Support Span psf Grey TF-M4 16" Support Span psf Maple TF-C4 16" Support Span psf Cream TF-G3 18" Support Span psf Grey TF-M3 18" Support Span psf Maple TF-C3 18" Support Span psf Cream

27 barrplastics.com Dock Edging & Bumpers Vinyl Dock Edging & Bumpers Our vinyl dock edging & corner bumpers will not crack, rot, grow fungus or deteriorate when exposed to temperature-extremes and remain unaffected by oil, gas or salt water. UV inhibitors prevent yellowing and discolouring from sunlight. Attach them to your dock using stainless steel shank nails, screws and hats or finishing washers. 23

28 Vinyl Edging Contact BARR Plastics Today! barrplastics.com Part # Description L (ft) W (in.) RR-5000 Light duty. Two channel design with 90 degree lip. Mounts horizontally. RR-5001 Heavy duty. Three channel design with 90 degree lip. Mounts 10 3 horizontally. RR-5002 Heavy duty. Three channel design with 90 degree lip. Mounts horizontally. RR-5005 Extra rugged. Four channel design with extended 90 degree lip Mounts horizontally. RR-5006 Extra rugged. Four channel design with extended 90 degree lip Mounts horizontally. RR-5007 Sturdy four channel design. Mounts horizontally or vertically RR-5008 Sturdy, four channel design. Mounts horizontally or vertically RR-5011 Light duty. One channel design. Mounts horizontally or vertically. Great for pilings Vinyl Corner Bumpers Part # Description L (in) W (in.) UC Vinyl dock corner bumper. Attach using stainless steel shank 6 6 nails. Available in black or white. UC Vinyl dock corner bumper. Attach using stainless steel shank rings. Available in black or white

29 barrplastics.com Dock Edging & Bumpers Inflatable Dock Corner Bumper Guides Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy duty hot-dipped galvanized hardware mounts securely to the dock. 12" and 18" wheels use a large 2" diameter axle housing for maximum strength. Corner Side Replacement Part # Part # Part # Wheel Size (in) Boat Size TM1078 TM1079 TM Up to 20 TM1072 TM1073 TM to 30 TM1080 TM1082 TM to 40 25

30 barrplastics.com Dock Accessories Dock Pile Hoop Holders Our convertible dock pile hoops have three basic pieces: a dock bracket, a hoop and a roller assembly, allowing you to configure it how you want. All hoops are 1.5 schedule 40 pipe. The dock brackets are 4 x 6 x 1/4 angles. The roller assembly features a 6 solid rubber roller and can be bolted to the deck plate or directly to the dock. All parts are hot dipped galvanized. Part # Description Size (in) Weight (lbs) PH-H8R Pile Hoop-Complete Assembly 8 26 PH-H10R Pile Hoop-Complete Assembly PH-H12R Pile Hoop-Complete Assembly PH-H14R Pile Hoop-Complete Assembly PH-H16R Pile Hoop-Complete Assembly PH-H18R Pile Hoop-Complete Assembly H-RA Roller Assembly-With Rubber Roller N/A 6 H-R Solid Rubber Roller H-RU UHMWPE(Ultra High Molecular Weight) Heavy Duty Roller

31 Complete Hoop Assemblies barrplastics.com PH-H8R PH-H10R PH-H12R PH-H14R PH-H16R PH-H18R Contact BARR Plastics Today! 27

32 barrplastics.com Dock Accessories Internal Square Dock Pile Guides Designed for holding pilings within your dock, our internal square pile guides are hot dipped galvanized after fabrication and are available in several models. All are made from 3 x 3 x 1/4 angles and have four 6 rubber rollers included. Replace rubber rollers with UHMW rollers in more demanding applications. Part # Description Size (in) Weight (lbs) PH-9IN Internal Square Pile Guide-Complete 9 34 PH-9INR Internal Square Pile Guide-Complete With 9 35 Removeable Side PH-12IN Internal Square Pile Guide-Complete PH-12INR Internal Square Pile Guide-Complete With Removeable Side PH-15IN Internal Square Pile Guide-Complete PH-15NR Internal Square Pile Guide-Complete With Removeable Sides H-RA Roller Assembly (See picture on External Guides Page) N/A 6 28

33 Complete Internal Square Assemblies barrplastics.com PH-9IN PH-9INR PH-12IN PH-12INR PH-15IN 29 PH-15INR Contact BARR Plastics Today!

34 barrplastics.com Dock Accessories External Square Dock Pile Guides Designed for holding pilings attached to the outside of your dock, our external square pile guides are hot dippled galvanized after fabrication and are available in several models. All are made from 2" tubing and include four 6 rollers and a deck plate that can mount right to your dock frame. Part # Description Size (in) PH-10EX External Square Pile Guide-Complete 8 PH-12EX External Square Pile Guide-Complete 10 PH-14EX External Square Pile Guide-Complete 12 PH-16EX External Square Pile Guide-Complete 14 PH-18EX External Square Pile Guide-Complete 16 H-RA Roller Assembly 6 30

35 Complete External Square Assemblies barrplastics.com PH-10EX PH-12EX PH-14EX PH-16EX PH-18EX 31 H-RA Contact BARR Plastics Today!

36 barrplastics.com Dock Accessories Dock Cleats Ensure your boat or jet ski stays safe at dock with our wide range of aluminum, nylon and galvanized steel dock cleats. Bolt the cleats to your dock and fasten your marine vehicle securely. Standard and fold down cleats available, along with tie down rings. 32

37 Aluminum Safety Cleats Contact BARR Plastics Today! barrplastics.com Part # Description Size (in) Weight (lbs) SFTC-6 Gray Aluminum Safety Cleat SFTC-6W White Aluminum Safety Cleat SFTC-6B Black Aluminum Safety Cleat SFTC-8 Gray Aluminum Safety Cleat 8 1 SFTC-8W White Aluminum Safety Cleat 8 1 SFTC-8B Black Aluminum Safety Cleat 8 1 Tired of stubbing your toe on cleats? These cleats lay down flat when not in use and are rounded on the edges. Made of Almag 35, a true marine grade aluminum, these cleats are extremely strong and corrosion-resistant. They can be bolted down from the top and use 3/8 fasteners. Nylon Safety Cleats Part # Description Size (in) Weight (lbs) B6001 Black Nylon Fold-Down Safety Cleat W6000 White Nylon Fold-Down Safety Cleat B9001 Black Nylon Fold-Down Safety Cleat 9 2 W9000 White Nylon Fold-Down Safety Cleat 9 2 Just like the aluminum models shown above, these cleats can lay down flat when not in use. Made of a nylon composite, they are strong and durable. With angled sides, they can even be driven over when folded down. Will not rust or corrode. Can bolt to existing boat docks or any other flat surface, such as truck beds, trailers, garages, and much more. They use 1/4 fasteners and are available in black or white. 33

38 Galvanized Steel Cleats Contact BARR Plastics Today! barrplastics.com These steel cleats are durable and long lasting, made from malleable iron and then hot-dipped galvanized. Use a hex head bolt and 3/8 fasteners to secure to your dock. Part # Description Size (in) Weight (lbs) C-8 Galvanized Steel Cleat 8 2 C-10 Galvanized Steel Cleat 10 3 C-12 Galvanized Steel Cleat 12 4 Tie Down Rings A simple tie down method for your boat aside from standard cleats. Secure these bolts directly into your dock and then use the rings to loop your rope through. Part # Description Size (in) TDR LAG BOLT Zinc plated machine bolt-lag style 6 x 1/2 TDR THRU BOLT Zinc plated machine bolt-through sytle 6 x 1/2 34

39 barrplastics.com Dock Accessories Pile Caps Protect your pilings from internal rot with our many options in conical pile caps, available in black or white. Unlike flat top pile caps, our standard and steep cone shapes will also help keep those pesky birds from making a mess of your pilings. Easily attach to and remove from round pilings to complete your dock system from BARR. 35

40 Standard Cone Pile Caps Contact BARR Plastics Today! barrplastics.com Part # Description Diameter (in) PCW-7 White Pile Cap - Standard Cone 7 PCB-7 Black Pile Cap - Standard Cone 7 PCW-8 White Pile Cap - Standard Cone 8 PCB-8 Black Pile Cap - Standard Cone 8 PCW-9 White Pile Cap - Standard Cone 9 PCB-9 Black Pile Cap - Standard Cone 9 PCW-10 White Pile Cap - Standard Cone 10 PCB-10 Black Pile Cap - Standard Cone 10 PCW-11 White Pile Cap - Standard Cone 11 PCB-11 Black Pile Cap - Standard Cone 11 PCW-12 White Pile Cap - Standard Cone 12 PCB-12 Black Pile Cap - Standard Cone 12 PCW-13 White Pile Cap - Standard Cone 13 PCB-13 Black Pile Cap - Standard Cone 13 PCW-14 White Pile Cap - Standard Cone 14 PCB-14 Black Pile Cap - Standard Cone 14 PCW-15 White Pile Cap - Standard Cone 15 PCB-15 Black Pile Cap - Standard Cone 15 PCW-16 White Pile Cap - Standard Cone 16 PCB-16 Black Pile Cap - Standard Cone 16 PCW-17 White Pile Cap - Standard Cone 17 PCB-18 Black Pile Cap - Standard Cone 18 36

41 Steep Cone Pile Caps Part # Description Diameter (in) PILECAP5.0W White Pile Cap - Steep Cone 5 PCB-5.5l Black Pile Cap - Steep Cone 5.5 PCB-6l Black Pile Cap - Steep Cone 6 PCB-6.5l Black Pile Cap - Steep Cone 6.5 PCB-7l Black Pile Cap - Steep Cone 7 PCB-7.5l Black Pile Cap - Steep Cone 7.5 PILECAP8.0W White Pile Cap - Steep Cone 8 PCB-8l Black Pile Cap - Steep Cone 8 PCB-8.5l Black Pile Cap - Steep Cone 8.5 PILECAP9.0W White Pile Cap - Steep Cone 9 PCB-9l Black Pile Cap - Steep Cone 9 PCB-9.5l Black Pile Cap - Steep Cone 9.5 PILECAP10.0W White Pile Cap - Steep Cone 10 PILECAP11.0W White Pile Cap - Steep Cone 11 PILECAP12.0W White Pile Cap - Steep Cone 12 PCB-12.5l Black Pile Cap - Steep Cone 12.5 PILECAP13.0W White Pile Cap - Steep Cone 13 PILECAP13.0B Black Pile Cap - Steep Cone 13 PCW-13l White Pile Cap - Steep Cone 13 PCB-13l Black Pile Cap - Steep Cone 13 PCB-13.5l Black Pile Cap - Steep Cone 13.5 PILECAP14.0W White Pile Cap - Steep Cone 14 PILECAP14.0B Black Pile Cap - Steep Cone 14 PCB-14.5l Black Pile Cap - Steep Cone 14.5 PILECAP15.0W White Pile Cap - Steep Cone 15 PILECAP15.0B Black Pile Cap - Steep Cone 15 PILECAP16.0B Black Pile Cap - Steep Cone 16 PCB-16l Black Pile Cap - Steep Cone 16 PCB-16.5l Black Pile Cap - Steep Cone 16.5 PILECAP17.0W White Pile Cap - Steep Cone 17 PILECAP18.0W White Pile Cap - Steep Cone 18 PILECAP20.0B Black Pile Cap - Steep Cone 20 37

42 barrplastics.com Dock Accessories Dock Ladders Get in and out of the water with ease using one of our many options of dock ladders. Choose from stainless steel, plastic, or aluminum ladders, with different models available for use at ocean marinas, lake properties or other swimming locations.

43 Aluminum Dock Ladders Stationary Dock Lift Ladder Part # Description Height (in) Weight (lbs) LL-3 3-Step LL-4 4-Step LL-5 5-Step LL-6 6-Step LL-7 7-Step These retractable ladders are perfect for seawalls and stationary docks with fluctuating water lines and serve as a great safety feature for commercial marinas for accidental fall-ins. They have a fixed section of ladder that extends down from the top surface of the dock approximately 28 and a retractable extension section to pull up and out of the water to avoid marine growth. Extend when on the dock or in the water. Made from marine-grade aluminum, giving them long-lasting durability. Floating Dock Lift Ladder Part # Description Height (in) Weight (lbs) FL-3 3-Step FL-4 4-Step FL-5 5-Step FL-6 6-Step FL-7 7-Step These ladders provide no obstruction to walking areas and are a great safety feature for commercial marinas for accidental fall-ins. Ladders have a fixed section that extends down from the top surface of the dock approx. 14" and a retractable extension section to pull up and out of the water to avoid marine growth. Can easily be extended when one is on the dock or in the water. Made from marine-grade aluminum, giving them long-lasting durability.

44 Aluminum Dock Ladders Continued Finger Pier Lift Ladder Part # Description Height (in) Weight (lbs) FPL-3 3-Step FPL-4 4-Step FPL-5 5-Step FPL-6 6-Step FPL-7 7-Step Made from marine grade aluminum, this lift ladder has a fixed section of ladder that extends down from the top surface of the dock approx. 28" and a retractable extension section to pull up and out of the water to avoid marine growth. Extend it easily when on the dock or in the water. Makes a great safety feature for commercial marinas for accidental fall-ins, especially ideal for narrow dock fingers with no obstruction of walkway. Durable and long-lasting. Standard Finger Pier Ladder Part # Description Height (in) Weight (lbs) FP-3 3-Step FP-4 4-Step FP-5 5-Step FP-6 6-Step FP-7 7-Step If you re looking for an economical and practical solution for narrow finger piers, our Finger Pier Ladders make a good choice. Made from marine grade aluminum, they are durable and long-lasting. With no hoop handles and only 6" intrusion into dock, they won t obstruct your walkway. The height above dock surface is 26", and the distance below dock surface of first rung is 12-14".

45 Aluminum Dock Ladders Continued Swinging Ladder Part # Description Height (in) Weight (lbs) SWL-3 3-Step SWL-4 4-Step SWL-5 5-Step SWL-6 6-Step SWL-7 7-Step Aluminum swinging ladders come with a fixed stainless steel bolt through it which pivots in a self-lubricating brass bushing installed in the bracket for maximum wear. The ladder can be stored up and out of water (90 ) and features a "quick" release pin to lock in the upright position. Alternatively, the ladder section can be removed (leaving mounting brackets bolted to deck) to prevent theft when away. Perfect for keeping side rails and steps clean and avoiding marine growth. Straight Ladder Part # Description Height (in) Weight (lbs) SL-3 3-Step SL-4 4-Step SL-5 5-Step SL-6 6-Step SL-7 7-Step Perfect for floating lake docks and swim platforms, these standard straight ladders are made from marine grade aluminum, serving as an econimical but high-quality choice. Durable and long-lasting.

46 Stainless Steel Dock Ladders Retractable Up and Out Safety Ladder Part # Description Retracting/Expanding Weight (lbs) Size (in) SL Step SL Step SL Step SL Step SL Step This stainless steel retractable/extendable safety ladder is easily deployed when in the water, perfect for "accidental" swimmers. Just a firm pull downward on the bottom rung deploys and extends the ladder. Compact in size, the ladder can be stored in retracted position when not in use, or, if theft is a concern, it is easy to remove during the off-season. Features high-visibility colouring and is tested up to 1,000 lbs. Quick Release Ladder Brackets Part # Description Size (in) Weight (lbs) L-QR Quick Release Ladder Brackets 11 x 3 x Ladder brackets allow for quick and easy removal of ladder when not in use, during the off-season or when theft is a concern. Can be used with the Straight and Lift Ladders. Made from high quality marine grade aluminum to be long lasting & corrosion-resistant.

47 Plastic Dock Ladders Contact BARR Plastics Today! barrplastics.com Part # Description Height (in) Weight (lbs) DL-4 4-Step DL-5 5-Step These sandstone coloured ladders are made of HD thick and durable roto-molded polyethylene. Ladders fill with water when submerged and drains when elevated, locking into place when up or down. Both models are corrosion-resistant, comfortable for feet, UV-protected for the long term, and the 5-step model is angled for easier climbing to even be used by dogs.

48 barrplastics.com Dock Accessories Polyethylene Dock Boxes Extra heavy-duty polyethylene construction allows these boxes to stay tough through any weather. Long term ultraviolet inhibitors protect the boxes against harsh sun rays and they stay firmly shut with a lockable reinforced cover. Boxes come with easy to assemble nylon hinges with stainless steel cables. Part # Description L (in) W (in) H (in) 8000 Small Triangular Polyethylene Dock Box Medium Triangular (recess) Polyethylene Dock Box Medium Rectangular Polyethylene Dock Box Large Triangular Polyethylene Dock Box Poly Dock Boxes.indd 1 5/8/ :55:20 AM

49 barrplastics.com Dock Accessories Fibreglass Dock Boxes These fibreglass dock boxes are built tough. With a UV gelcoat finish and stainless steel lockable latch and hardware, these are sure to hold up in the harest marine environments. Their shocks key your lid open on rocking docks and in higher wind areas, allowing for a slower, more controlled closing. Constructed witha smooth interior finish so you will never get splinters when handling and storing. Part # Description L (in) W (in) H (in) Large Standard Fibreglass Dock Box Triangular Fibreglass Dock Box Small Standard Fibreglass Dock Box Medium Standard Fibreglass Dock Box Deep Small Standard Fibreglass Dock Box Deep Medium Standard Fibreglass Dock Box Small Low-Profile Fibreglass Dock Box Medium Low-Profile Fibreglass Dock Box Small Top-Seat Fibreglass Dock Box Large Top-Seat Fibreglass Dock Box

50 Dock Building Accessories Plastic Dock Wheel Guides Designed for roll-in docks and boat lifts, our dock wheel guides are made of heavy duty plastic that will never wear out and won't rust on the shaft. They roll easily on all terrains and require no maintenance. Optional water inlets and drains are available. Color: black. Structural strength: 700 lb capacity per dock wheel. Product Specs Part # Description O.D. (in) Tread Surface Width (in) Dockwheel24 Plastic dock wheel guide Hub Size (in) Shaft Diameter(in) x 7 3/ (for 1.5 galvanized) 46

51 barrplastics.com Marine Buoys Standard Mooring Buoys Buoys can be used to mark waterways, can be rented to boaters at your marinas, or can be used to support the line to which you anchor your own watercraft. Our cost-effective orange-striped standard mooring buoys match BC regulations for private moorage and will remain durable and attractive for years to come. The hard polyethylene shell on our mooring buoys has UV inhibitors to keep it looking new, while the polystyrene foam fills the shell to provide maximum buoyancy. A PVC tube is molded through the center of the buoy to allow for different hardware options and an injection-molded collar captures the tube on each end and protects the buoy from wear. 47

52 Eyelet Hardware Style Attach directly to mooring line BELOW the buoy. Part # Description Diameter (in) Buoyancy (lbs) Thru Tube ID (in) FFMB1212 Eyelet Hardware Style Buoy FFMB2424 Eyelet Hardware Style Buoy FFMB1818 Eyelet Hardware Style Buoy Weight (lbs) Thru-Chain & Shackle Style Part # Description Diameter (in) Attach directly to shackle at the TOP of the buoy. Buoyancy (lbs) Thru Tube ID (in) FFMB1818TC Thru Chain Style Buoy FFMB2424TC Thru Chain Style Buoy FFMB3232TC Thru Chain Style Buoy FFMB3838TC Thru Chain Style Buoy FFMB4242TC Thru Chain Style Buoy Weight (lbs) Thru-Chain Style W/ Extended Pipe Attach directly to shackle at the TOP of the pipe. Part # Description Diameter (in) Buoyancy (lbs) Thru Tube ID (in) FFMB1818EP Thru Chain Extend. Pipe Buoy FFMB2424EP Thru Chain Extend. Pipe Buoy FFMB3232EP Thru Chain Extend. Pipe Buoy FFMB3838EP Thru Chain Extend. Pipe Buoy FFMB4242EP Thru Chain Extend. Pipe Buoy Weight (lbs)

53 Galvanized Chain & Hardware Contact BARR Plastics Today! barrplastics.com Eyelet Style Thru Chain & Shackle Style Part # Description Buoy Size Needed (in) Working Load Limit (lbs) Weight (lbs) FFMB12F 12" Galvanized Eyelet Assembly 12 N/A 2 FFMB18F 18 Galvanized Eyelet Assembly 18 N/A 3 FFMB24F 24 Galvanized Eyelet Assembly 24 N/A 4 SHACKLE580 5/8" Shackle - Galv. for 1/2" Mooring Chain SHACKLE750 3/4" Shackle - Galv. for 3/4" Mooring Chain SHACKLE780 7/8" Shackle - Galv. for 3/4" Mooring Chain N/A 4 BUOYCHAIN500 1/2" Hot-Dip Galv. Long Link Mooring Chain lbs./ft. BUOYCHAIN750 3/4" Hot-Dip Galv. Long Link lbs./ft. Mooring Chain BCB500 3" HD UV Plastic Aligning Washerfor N/A 0.2 1/2" Chain BCB750 4" HD UV Plastic Aligning Washerfor 3/4 Chain N/A

54 barrplastics.com Marine Buoys Marker & Regulatory Buoys Featuring rotationally molded high density polyethylene shells, our marker and regulatory buoys have uniform wall thickness, eliminating the internal stresses that cause cracking over time and under extreme temperature changes. Each buoy is UV-protected so colors will stay vivid for years. Combine them with a handy assortment of buoy labels, and you ll have no trouble relaying important messages to passersby in the water. 50

55 Can Shaped Buoys Part # Description Height (in) Max. Diameter (in) Buoyancy (lbs) Green Can Shaped Buoy Danger Can Shaped Buoy Green Can Shaped Buoy Standard Can Shaped Buoy Standard Can Shaped Buoy Nun Shaped Buoys Part # Description Height (in) Max. Diameter (in) Buoyancy (lbs) Red Nun Shaped Buoy Red Nun Shaped Buoy Standard Nun Shaped Buoy Other Shaped Buoys Part # Description Height (in) Max. Diameter (in) Buoyancy (lbs) Long Tube Shaped Buoy Spar Shaped Buoy Cone Shaped Buoy

56 Buoy Labels Fade resistant, self-adhesive vinyl marker labels are brightly coloured for high visibility. Two labels are required per buoy, so they come in pairs. Each label is 13 wide x 24 long and warranted for 5 years against weathering or fading. Contact BARR Plastics Today! barrplastics.com

57 barrplastics.com Marine Buoys Heavy Duty Mooring Buoys Our heavy duty mooring buoys are made for commercial applications, built tough to withstand harsh elements. They come with stainless steel mooring eyes. Shackles sold separately. Part # Description Size (in) Weight (lbs) Buoyancy (lbs) ACB680 Cylindrical buoy with steel bar. 62 x 36 x ACB1100 ACACB680C ACB2000 Cylindrical buoy for cage systems with steel bar. Cylindrical buoy for cage systems with coned-shape bottom Cylindrical buoy for cage systems with coned-shape bottom. 62 x 48 x x 36 x x 47.5 x

58 barrplastics.com Industrial Floats & Pontoons Nautilus Pipe Floats The Nautilus family of floats can be used foam filled or unfoamed for specific applications. Tapered nose design reduces drag on float while the tongue and groove profile locks the assembly together. The top ribs allow floats to be stacked for storage or shipment. Part # Pipe Size (in) Diameter (in) Length (in) Bolts/ Set Weight (lbs) F F F F F F F F F F % Submersion 54

59 barrplastics.com Industrial Floats & Pontoons Industrial Pipe Floats These pipe floats are molded as one piece from tough, impact resistant high density polyethylene and are foam filled. Their low profile float design provides stability and reduced resistance to waves, currents, and winds. They re able to withstand sub-zero temperatures and an added UV stabilizer provides excellent resistance to sunlight. Part # Pipe Size (in) Outside Diameter (in) Inside Diameter (in) Length (in) Weight (lbs) Capacity 50% Submersion 55

60 barrplastics.com Industrial Floats & Pontoons Industrial Float Balls Our foam-filled float balls are ideal for under surface pipelines, submersible pipes, safety and barrier fences, suspended electric cable, energy applications and oil and gas applications. Part # Description Diameter (in) Weight (lbs) FB VC 3/4 PVC pipe 1 extended w/ collar FB RD 1/2 Galv. thru rod w/ one fixed eye FB VC 3/4 PVC pipe 1 extended w/ collar FB RD 1/2 Galv. thru rod w/ one fixed eye FB VC 3/4 PVC pipe 1 extended w/ collar FB RD 1/2 Galv. thru rod w/ one fixed eye FB VC 1 1/2 PVC pipe 1 extended w/ collar FB RD 1/2 Galv. thru rod w/ one fixed eye FB VC 1 1/2 PVC pipe 1 extended w/ collar FB RD 1/2 Galv. thru rod w/ one fixed eye FB VC 1 1/2 PVC pipe 1 extended w/ collar FB RD 1/2 Galv. thru rod w/ one fixed eye FB VC 1 1/2 PVC pipe 1 extended w/ collar FB RD 3/4 Galv. thru rod w/ one fixed eye FB VC 1 1/2 PVC pipe 1 extended w/ collar FB RD 3/4 Galv. thru rod w/ one fixed eye Capacity 50% Submersion

61 barrplastics.com Industrial Floats & Pontoons Industrial Pontoons There s no need to worry about rusting or corrosion with these pontoons, molded as one piece from tough, impact resistant high density polyethylene. They can withstand sub zero temperatures and their added UV stablilizer provides superior resistance to UV rays. Foamfilled and designed to provide stability and reduced resistance to waves, currents and winds, our industrial pontoons are tough for years to come. 57

62 Standard Series Modular Pontoons Part # Description Length (in) Width (in) Weight (lbs) Standard Body-Black Standard Body-Blue Nose Cone-Black Nose Cone-Blue Capacity 50% Submersion Both the Standard and Gullwing Series Pontoons provide reliable floatation for floating pumps, instrument platforms, survey vessels, oil spills, booms, pipeline floats, oceanographic floats, work barges, houseboats, boats, docks and other applications. Integral flanges are molded to simplify attachment of the pontoon, bolt holes are molded in and require no drilling. Manufactured in sections, allowing you to create any size pontoon for your specific application. Gullwing Series Modular Pontoons Part # Description Length (in) Width (in) Weight (lbs) Gullwing Body-Black Gullwing Body-Blue Gullwing Nose Cone-Black Gullwing Nose Cone-Blue Gullwing Body-Black Gullwing Body-Blue Gullwing Nose Cone-Black Gullwing Nose Cone-Blue Gullwing Body-Black Gullwing Body-Blue Gullwing Nose Cone-Black Gullwing Nose Cone-Blue Capacity 50% Submersion 58

63 Super Pontoons Contact BARR Plastics Today! barrplastics.com The Super Pontoon provides super stability for super-sized installations. It is great for barges, custom applications, marinas, floating restaurants, hotels and dredging applications. The unique nose cone design provides greater stability when easing displacement of water, performing exceptionally well in demanding wave or current environments by lessening structural fatigue. Part # Description Length (in) Width (in) Weight (lbs) Super Body- Black Super Body- Blue Super Nose- Black Super Nose- Blue Capacity 50% Submersion 59