Lucrări ştiinţifice și cărţi în domeniul disciplinelor din postul didactic
|
|
- Scot Cummings
- 5 years ago
- Views:
Transcription
1 Lucrări ştiinţifice și cărţi în domeniul disciplinelor din postul didactic A. Teza de doctorat: Tema: Contribuții la studiul cinematic și dinamic al sistemelor mecanice caracterizate prin modificări rapide ale parametrilor de mișcare Îndrumător: Prof. univ. dr. ing. Vasile Năsui Universitatea Tehnică Cluj Napoca Anul: 2014 B. Cărţi: 1. Crăciun, Ioana, 2015, Mecanica: Cinematica, Editura RISOPRINT, România, Cluj-Napoca, ISBN Crăciun, Ioana, 2015, Culegere de probleme de Mecanică: Statica, Editura RISOPRINT, România, Cluj-Napoca, ISBN C. Lucrări indexate ISI/BDI 1. Crăciun, I., About power and energy absorption at elevators with speed modeling, Academic Journal Of Manufacturing Engineering, VOL. 13, ISSUE 1/2015, pp , ISSN , 2. Crăciun, I.,Ungureanu, M., Dăscălescu, A., Considerations on the kinematics of an elevator with speed modeling and continous deceleration, Annals of the University of Petroşani, Mechanical Engineering, Vol. 17 (2015), pp. 5-12, ISSN , 3. Dăscălescu, A., Crăciun, I., The study of the reactions variation on the cycloid reducer satellite gear depending on the number of the roller teeth in gearing, Annals of the University of Petroşani, Mechanical Engineering, Vol. 17 (2015), pp.13-18, ISSN , 4. Ungureanu M., Banciu M., Crăciun, I., Nondestructive testing for the brake systems of mining hoists, Annals of the University of Petroşani, Mechanical Engineering, Vol. 17 (2015), pp., ISSN , 5. Crăciun, I., Considerations on the Power Absorption of an Elevator with Speed Modeling and Continuous Deceleration, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXIX (2015), pp , ISSN , 6. Stoicovici, D., Bănică, M., Ungureanu, M., Chira, F., Crăciun, I., Establishing the Parameter Behavior at a Simulation Program Based On a Stochastic Approach, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXVII (2013), pp , ISSN ,
2 7. Crăciun, I., Ungureanu, M., Analysis Shock to Start and Stop an Elevator, Transactions of the VŠB-Technical University of Ostrava, Mechanical Series No. 2, 2012, vol. LVIII article No. 1916, 8. Crăciun, I., About Power at Elevators with Motion Control, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXVI (2012), pp.13-16, ISSN , 9. Crăciun, I., Study for elevator cage position, BULETIN ŞTIINŢIFIC, Seria C, Fascicola: Mecanica, Tribologie, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technologiy, Volume XXV (2011), pp , ISSN , Crăciun, I., On dynamical power for mechanical systems with designed acceleration profiles which limit jerk, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), pp , ISSN , Crăciun, I., Stoicovici, D., Horgoș, M., About the transitory regime of the mining extraction machine, Annals of the University of Petroşani, Mechanical Engineering, Vol. 12 (2010), pp , ISSN , a7.pdf 12. Drăgan, L., Chira, F., Crăciun, I., Kinematic modeling of the free human limbs, ISI Proceedings of The 14th International Conference ModTech 2010, Modern Technologies, Quality and Innovation, New Face of T.M.C.R., May , ISSN Stoicovici, D., Ungureanu, M., Crăciun, I., The position of vibrating mechanism center mass as a factor of influence on screening, SCIENTIFIC BULLETIN, Serie C, Volume XXIII, Fascicle: Mechanics, Tribology, Machine Manufacturing Technologiy, ISSN , pp , Stoicovici, D., Ungureanu, M., Chira, F., Crăciun, I., Preventive maintenance practical aplication case for air piston compressor, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume V (XV), ISSN , cod CNCSIS 564, pp , Stoicovici, D., Horgoș, M., Crăciun, I., Contribution to establish the optimal jump regime in the case of screening critical humidity material, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume V (XV), ISSN , cod CNCSIS 564 pp. 26, D. Lucrări publicate în reviste şi volume de conferinţe cu referenţi (neindexate 1. Crăciun, I., Ungureanu, M., Drăgan, L., About jerk at the start and stop of an electrical powered elevator, 12th International Conference Automation in Production Planning and Manufacturing, Žilina, 2011, pag.72-74, ISBN
3 2. Ungureanu, M., Crăciun, I., Cosma, M.,Damian, F., Study of the jerk at the start and stop of an electrical powered elevator, SCIENTIFIC BULLETIN, Serie C, Volume XXV, Fascicle: Mechanics, Tribology, Machine Manufacturing Technologiy, Baia Mare (România), Nyiregyhaza, (Ungaria) pg ISSN , 3. Ursu Fischer, N., Ursu, M., Crăciun, I., The 3D representation of the lifted load displacement, due to the cable elasticity. Acta Technica Napocensis, Series: Applied Mathematics and Mechanics, 52, vol. Ia, pp , Universitatea Tehnică Cluj Napoca, International Conference on Engineering Graphics and Design, iunie 2009, ISSN Crăciun, I., Ungureanu, M. Dynamics of starting up of the double-drum hoist SCIENTIFIC BULLETIN, Serie C, Volume XXIII, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology ISSN , May Stoicovici, D.I., Ungureanu, M., Crăciun, I., The position of vibrating mechanism center mass as a factor of influence on screening The Proceedings of the 7th International Multidisciplinary Conference Baia Mare, Romania, SCIENTIFIC BULLETIN, Serie C, Volume XXI, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, pp , May 17-18, 2007 ISSN , 6. Crăciun, I., An explicite relation for the determination of a point having a given second degree acceleration, Acta Technica Napocensis, Series: Applied mathematics and Mechanics, 2005, Nr. 48, vol. I, pag. 57, ISSN Crăciun, I., O relaţie explicită pentru determinarea unui punct al unui solid rigid având acceleraţia dată. În volumul: North University of Baia Mare, Scientific Bulletin, Serie C, volume XVIII, Supplement, at The National Meeting with International Participation NORDTECH 2004, Baia Mare 2004, pag.59, ISSN Crăciun,I., O relaţie explicită pentru determinarea unui punct având acceleraţia de ordinul al doilea dată. Scientific Bulletin, Serie C, volume XVIII, Supplement, at The National Meeting with International Participation NORDTECH 2004, Baia Mare 2004, pag.63. ISSN Crăciun, I., Contribuţii la studiul dinamic al maşinilor vibratoare ; în Analele Universităţii din Oradea; Lucrările Sesiunii Anuale de Comunicări Ştiinţifice cu participare internaţională IMT Oradea-2002, Fascicula: Inginerie managerială şi tehnologică, Secţiunea:Mecanică, pag.51, ISSN Crăciun,I., Crăciun,M., Contribuţii la stabilirea unor relaţii generalizate de calcul al maşinilor vibratoare, Buletin Ştiinţific, Seria C, Volumul XV, Fascicola: Mecanică, Tribologie, Tehnologia Construcţiilor de Maşini, Universitatea de Nord Baia Mare; Partea I, Baia Mare, 2001, pag.87. ISSN Crăciun, I., Crăciun, Ioana, Crăciun, M., Problema punctelor de viteză dată şi de acceleraţie dată în cinematica solidului rigid Buletin Ştiinţific, Seria C, Vol. XV, Fascicola: Mecanică, Tribologie, Tehnologia Construcţiilor de Maşini, Partea I, pg.83, Universitatea de Nord din Baia Mare, Baia Mare, ISSN Stoicovici, D.I., Maloş, I., Contributions at the influence of the ratio material weight total vibrating weight in dynamical study of vibrting screens. Scientific Bulletin. Serie C, Volume XV,Fascicle: Mechanics, Tribology, Technology of Machine Manufacturing, Part IV. International Multidisciplinary Conference, 4th Edition may 2001,Baia Mare Pp ISSN Stoicovici, D.I., Maloş, I., Crăciun, M., Contribuţii la studiul mişcării particulelor de material pe ciururile vibratoare, micro-cad 2001 International Computer Science
4 Conference. Section M: Applied Mechanical Engineering Sciences. Miskolc, Hungary, ISBN x ö, ISBN , Crăciun,I., Crăciun, Ioana, Crăciun, M., Studiul stării spaţiale de tensiuni în raport cu un sistem de coordonate sferice, Buletin Ştiinţific, Seria C, Volumul XV, Fascicola: Mecanică, Tribologie, Tehnologia Construcţiilor de Maşini, Partea I, Universitatea de Nord Baia Mare; 2001, pag.75, ISSN Stoicovici, I.D., Maloş, I., Crăciun, M., Contributions at the dynamical study of vibrating screens, microcad 2000 International Computer science Conference. Section M: Applied Mechanical Engineering Sciences. Miskolc, Hungary, ISBN x o, ISBN pp Crăciun I., Stoicovici D., Maloş, I., Crăciun M., Contributions at the calculus of the principal tensions in the case of the general tension state. microcad'2000 International Computer Science Conference, February 23-24, 2000, Section M: Applied Mechanical Engineering Sciences, University of Miskolc, Hungary, ISBN x o, ISBN Crăciun, I., Maloş, I., Crăciun, M., Contributions at the definition and classification of some particular motions of the Rigid Body microcad'99 International Computer Science Conference, February 24-25, 1999, Section M:Mechanical Engineering Sciences, University of Miskolc, Hungary. 18. Crăciun I., Maloş, I., Crăciun M., Contributions at the study of principal inertia axes and principal inertia moments of the system of material point. microcad'99 International Computer Science Conference, February 24-25, 1999, Section M:Mechanical Engineering Sciences, University of Miskolc, Hungary. ISBN x o, ISBN Maloş, I., Contributions at the study of the dynamic influence of the electric motor on the motion of the mining extraction machine. microcad'99 International Computer Science Conference, February 24-25, 1999, Section M:Mechanical Engineering Sciences, University of Miskolc, Hungary. ISBN x o, ISBN Crăciun I., Maloş, I., Maloş M., On the Geometrical Inertia Moments of Plane Surfaces. microcad'98 International Computer Science Conference, February 25-26, 1998, Section 21. Maloş, I., Contributions on the study of the influence of shocks of the movements of the extractions machines, microcad'98 International Computer Science Conference, February 25-26, 1998, Section L:Mechanical Engineering Science, University of Miskolc, Hungary, ISBN x o, 22.Maloş, I., On the transitory movements at the start and stop of the mining extraction machines, microcad'97 International Computer Science Conference, February 26-27, 1997, Section L:Mechanical Engineering Science, University of Miskolc, Hungary, ISBN x o, 23. Maloş I., Crăciun I., Crăciun M., Bănică M., On the schematization of High diagram, microcad'97 International Computer Science Conference, February 26-27, 1997, Section 24. Maloş, I., Maloş, M., Contributions at the study of the transitory movements of the mining extraction machines. În volumul: microcad'96 International Computer Science Conference, February 29, 1996, Section L:Mechanical Engineering Science, University of Miskolc, Hungary, ISBN x o,
5 25. Crăciun, I., Maloş, I., Maloş, M., On the Notion of Principal inertia Moments, microcad'96 International Computer Science Conference, February 29, 1996, Section 26. Maloş, I, Crăciun, I., Maloş M., Contributions at the Dynamical Study of the Mining Extraction Machines, microcad'95 International Computer Science Conference, February 25, 1995, Section J: Machine and Structure Design, University of Miskolc, Hungary, ISBN x o, 27. Crăciun, I., Maloş, I., Maloş, M., Contributions at the dynamical Study of the Vibrating machines. A classification from a Dynamic Point of View of the Vibrating machines. microcad'95 International Computer Science Conference, February 25, 1995, Section J: Machine and Structure Design, University of Miskolc, Hungary, ISBN x o, ISBN E. Lucrări didactice fără ISBN 1. Crăciun, I, Mecanica. Îndrumător de lucrări de laborator. Universitatea de Nord din Baia Mare, F. Membru în echipă grant național Nr. 12/ , Beneficiar: S.C. INTERCONTI INDUSTRIE S.R.L. Baia Mare: Studiu și soluție pentru dispozitivul de prindere KLAUKE AMG41-F in vederea asimilării în producție de către S.C. INTERCONTI INDUSTRIE S.R.L. Data Semnătura
TOOL PRODUCTION VIA RAPID TOOLING
TOOL PRODUCTION VIA RAPID TOOLING drd. ing. Zoltan-Gabor BAKI-HARI 400169 Cluj-Napoca str. M. Costin nr. 19; tel: +40-723-206 415; e-mail: bakihari@yahoo.com KEY WORDS: Tool Production; Rapid Tooling;
More informationLISTA LUCRĂRILOR Ing. ANA-ANDREEA MIHĂRTESCU
LISTA LUCRĂRILOR Ing. ANA-ANDREEA MIHĂRTESCU [1] Mihărtescu, A. A. Considerations Concerning Customer Orientation Towards Products Conception, Scientific Buletin of the Politehnica University of Timişoara,
More informationLISTA Lucrărilor ştiinţifice şi didactice elaborate şi publicate
LISTA Lucrărilor ştiinţifice şi didactice elaborate şi publicate A. Cărţi, manuale universitare, culegeri de probleme şi îndrumătoare publicate în edituri cu ISBN 1. Andrei Kiraly, Monica Bălcău, Grafică
More informationLISTĂ LUCRĂRI ŞTIINŢIFICE
LISTĂ LUCRĂRI ŞTIINŢIFICE A. Teza de doctorat Ligia Chira CREMENE, Tehnici adaptive pentru imbunatatirea performantelor retelelor radio, Inginerie Electronica si Telecomunicaț ii, 2009 B. Cărţi şi capitole
More informationC1.1. Lucrari indexate ISI Web of Knowledge
C.. Lucrari indexate ISI Web of Knowledge Lista lucrarilor publicate in reviste cu factor de impact calculat si scorul relativ de influenta cumulat lucrarii Tipul lucrarii (e.g. articol) revistei revistei
More informationListă lucrări relevante
Lista completă de lucrări a candidatului șef lucrări dr. ing.germán-salló Zoltán la postul nr. 8 conferențiar din statul de funcții al Departamentului de Inginerie Electrică și calculatoare Listă lucrări
More informationABOUT THE PLANING CROSS LAMINATED SOLID WOOD
Analele Universităţii din Oradea, Fascicula Protecţia Mediului Vol. XVII, 2011 ABOUT THE PLANING CROSS LAMINATED SOLID WOOD Galis Ioan *, Lucaci Codruţa, Lustun Liana, Fetea Marius, Derecichei Laura, Cheregi
More informationSPECIAL INTERNAL WORM GEAR PAIRS WITH HELLICAL WORM
Proceedings in Manufacturing Systems, Volume 7, Issue, 202 ISSN 2067-9238 SPECIL INTERNL WORM GER PIRS WITH HELLICL WORM Gábor László PÁY,*, Eugen PY 2 Prof. Ph.D., University College of Nyíregyháza, Hungary
More informationLista de lucrări. Candidat: PRISACARIU VASILE. a. Lista a celor mai relevante 10 lucrări
a. Lista a celor mai relevante 10 lucrări Lista de lucrări 1 Cîrciu I., Luculescu D., Prisacariu V., Mihai E., Rotaru C., Theoretical Analysis and Experimental Researches regarding the Asymmetrical Fluid
More informationVIBRATIONS MEASUREMENT IN ORDER TO IDENTIFY THE FAULTS TO THE TABLES AND SUPPORTS ON WHICH THE EMBROIDERY MACHINES ARE PLACED
ANNALS OF THE UNIVERSITY OF ORADEA FASCICLE OF TEXTILES, LEATHERWORK VIBRATIONS MEASUREMENT IN ORDER TO IDENTIFY THE FAULTS TO THE TABLES AND SUPPORTS ON WHICH THE EMBROIDERY MACHINES ARE PLACED ŞUTEU
More informationResearches Concerning to Minimize Vibrations when Processing Normal Lathe
ANALELE UNIVERSITĂŢII EFTIMIE MURGU REŞIŢA ANUL XXII, NR. 2, 2015, ISSN 1453-7397 Lenuța Cîndea, Cornelia Victoria Anghel Drugărin, Oana Codruța Hamat, Dan Pîrșan, Cornel Hațiegan Researches Concerning
More informationFACTOR DE IMPACT 2015 FACTOR DE IMPACT 2013 FACTOR DE IMPACT
ACTA ENDOCRINOLOGICA-BUCHAREST 1 1841-0987 0.183 0.450 0.210 0.268 0.235 0.016 0.014 0.025 0.017 Endocrinology & Metabolism http://www.acta-endo.ro/ ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING 2 1582-7445
More informationCURRICULUM VITAE. Languages: English, French
CURRICULUM VITAE Name: Dragos-Radu Popescu Position: Associate Professor, University of Bucharest Date of birth: July 9, 1951 Place of birth: Giurgiu, Romania Marital status: Divorced, one son (born 1985)
More informationMACHINING BY ELECTRICAL EROSION THE GEAR WHEELS
MACHINING BY ELECTRICAL EROSION THE GEAR WHEELS Drd. Ing. IOAN BADIU, Technical University of Cluj-Napoca Prof.univ.dr.ing. MARCEL S.POPA, Technical University of Cluj-Napoca ABSTRACT: Gears which can
More informationLISTA COMPLETĂ A LUCRĂRILOR ELABORATE
LISTA COMPLETĂ A LUCRĂRILOR ELABORATE I. TEZA DE DOCTORAT (T) T1. A.A. Dobre, Metode de investigație în analiza unor fenomene cuplate de inginerie medicală, cordonator Prof. Dr. Ing. Alexandru Morega,
More informationTHEORETICAL ASPECTS OF WOOD CROSS MILLING KINEMATICS AND DYNAMICS
Analele Universităţii din Oradea, Fascicula Protecţia Mediului Vol. XIX, 2012 THEORETICAL ASPECTS OF WOOD CROSS MILLING KINEMATICS AND DYNAMICS Galiş Ioan,* Fetea Marius, * Lucaci Codruta,* Liana Marta
More informationSTUDY ON MAKING DECORATIVE ITEMS CARVED WOOD
Analele Universităţii din Oradea, Fascicula Protecţia Mediului Vol. XXVII, 2016 STUDY ON MAKING DECORATIVE ITEMS CARVED WOOD Lucaci Codruţa*, Cheregi Gabriel*, Derecichei Laura*, Lustun Liana Marta* *University
More informationProfessor Laurean BOGDAN, PhD. My Web Page
Professor Laurean BOGDAN, PhD My Web Page Office: "Lucian Blaga" University of Sibiu (LBUS), Department of Industrial Machinery and Equipment, E. Cioran Str., No. 4, Sibiu - 550025, ROMANIA E-Mail: laurean.bogdan@ulbsibiu.ro,
More informationPotential Links between Competitiveness of the Cluster-Type Economic Agglomerations and Systems of Innovation Process
5 th Central European Conference in Regional Science CERS, 2014 961 Potential Links between Competitiveness of the Cluster-Type Economic Agglomerations and Systems of Innovation Process DINU STOICOVICI,
More informationFACTOR DE IMPACT 2014 FACTOR DE IMPACT 2015 FACTOR DE IMPACT
1 ACTA ENDOCRINOLOGICA-BUCHAREST 1841-0987 0.183 0.450 0.210 0.268 0.235 0.250 0.016 0.014 0.025 0.017 0.020 Endocrinology & Metabolism http://www.acta-endo.ro/ ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING
More informationFACTOR DE IMPACT 2014 FACTOR DE IMPACT 2015 FACTOR DE IMPACT science
ACTA ENDOCRINOLOGICA-BUCHAREST 1 1841-0987 0.183 0.450 0.210 0.268 0.235 0.250 0.016 0.014 0.025 0.017 0.020 Endocrinology & Metabolism http://www.acta-endo.ro/ ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING
More informationLISTA DE LUCRĂRI. Universitatea Politehnica Timişoara Facultatea de Management în Producţie şi Transporturi Departamentul de Management
Universitatea Politehnica Timişoara Facultatea de Management în Producţie şi Transporturi Departamentul de Management LISTA DE LUCRĂRI Candidat: Albulescu Claudiu Tiberiu - Dr./ din 2009, Lector Universitar/
More informationPrimul numar indexat FACTOR DE IMPACT 2011 FACTOR DE IMPACT Forestry
ACTA ENDOCRINOLOGICA-BUCHAREST 1 1841-0987 1/2007 0.183 http://www.acta-endo.ro/ 0.450 0.016 Endocrinology & Metabolism ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING 2 1582-7445 1/2007 http://www.aece.ro
More informationFACTOR DE IMPACT Primul numar indexat FACTOR DE IMPACT AMFITEATRU ECONOMIC /FEB
1 ACTA ENDOCRINOLOGICA-BUCHAREST http://www.acta-endo.ro/ 1841-0987 1/2007 0.183 0.450 0.016 Endocrinology & Metabolism ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING 2 1582-7445 1/2007 http://www.aece.ro
More informationMethods of Growth through Innovation and Technology Transfer
Author: prof.dr.eng. Title: METHODS OF GROWTH THROUGH INNOVATION AND TECHNOLOGY TRANSFER Domain: ENGINEERING AND MANAGEMENT PUBLICATIONS LIST RELEVANT PAPERS 1. SĂVESCU,D. Some aspects regarding IP in
More informationPrimul numar indexat FACTOR DE IMPACT 2011 FACTOR DE IMPACT (e) 1/2011.
ACTA ENDOCRINOLOGICA-BUCHAREST 1 1841-0987 1/2007 0.183 0.450 http://www.acta-endo.ro/ 0.016 Endocrinology & Metabolism ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING 2 1582-7445 1/2007 http://www.aece.ro
More informationPrimul numar indexat FACTOR DE IMPACT Endocrinology & Metabolism Mathematics 0.
ACTA ENDOCRINOLOGICA-BUCHAREST 1 1841-0987 1/2007 http://www.acta-endo.ro/ 0.052 0.039 Endocrinology & Metabolism ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING 2 1582-7445 1/2007 http://www.aece.ro 0.688
More informationTI INDEXATE/COTATE "ISI"
ACTA ENDOCRINOLOGICA-BUCHAREST 1 1841-0987 1/2007 0.183 0.450 0.210 0.016 0.014 Endocrinology & Metabolism http://www.acta-endo.ro/ ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING 2 1582-7445 1/2007 http://www.aece.ro
More informationLISTA LUCRĂRILOR PUBLICATE
LISTA LUCRĂRILOR PUBLICATE Lucrări ştiinţifice în reviste recenzate în BDI Singur autor: 1. Mihalache R. 2015, Motivation vs. Need of ESP of Engineering Students, The Journal of International Social Research,
More informationLista completă de lucrări a candidatei: Dr. Edith-Hilde KAITER
ROMÂNIA MINISTERUL APĂRĂRII NAȚIONALE ACADEMIA NAVALĂ MIRCEA CEL BĂTRÂN Anexa la Cererea nr. din Lista completă de lucrări a candidatei: Dr. Edith-Hilde KAITER I. LISTA CELOR MAXIM 10 LUCRĂRI: - Lucrări
More informationDETECTION OF ERRONEOUS OPERATION IN TTL INTEGRATED CIRCUITS USING MODULUS FUNCTIONS OF NOISE MARGINS
DETECTION OF ERRONEOUS OPERATION IN TTL INTEGRATED CIRCUITS USING MODULUS FUNCTIONS OF NOISE MARGINS Mircea Iulian PORTEANU Department of Power Engineering, University of Oradea, Oradea, Romania Department
More informationLISTA DE LUCRĂRI. Conf.univ.dr. NIMINEł VALER. I. Teza de doctorat
LISTA DE LUCRĂRI Conf.univ.dr. I. Teza de doctorat T1. NimineŃ Valer, Sisteme diferenńiale exterioare. AplicaŃii în teoria controlului, Universitatea,,Al.I.Cuza Iaşi, Facultatea de Matematică, 2005 sub
More informationInfluence of Vibration Amplitude Oscillations on the Conical Sieve Suspended Dorel STOICA, Gheorghe VOICU, Carmen RUSĂNESCU
Bulletin UASVM Agriculture 69(1)/2012 Print ISSN 1843-5246; Electronic ISSN 1843-5386 Influence of Vibration Amplitude Oscillations on the Conical Sieve Suspended Dorel STOICA, Gheorghe VOICU, Carmen RUSĂNESCU
More informationLISTA PUBLICAŢIILOR I. CĂRŢI
LISTA PUBLICAŢIILOR I. CĂRŢI 1. Ancău, M. Optimizare numerică. Algoritmi şi programe în C, (ISBN 973-686-793-5) Editura Casa Cărţii de Ştiinţă, Cluj-Napoca, 2005. 2. Ancău, M. Tehnologia Fabricaţiei, (ISBN
More informationUpdating the Nomographical Diagrams for Dimensioning the Concrete Slabs
Acta Technica Napocensis: Civil Engineering & Architecture Vol. 57, No. 1 (2014) Journal homepage: http://constructii.utcluj.ro/actacivileng Updating the Nomographical Diagrams for Dimensioning the Concrete
More informationEXPERIMENTAL STUDY OF AXIAL FORCE AND OF TORQUE IN CASE OF OLC45 STEEL DRILLING, USING EXPONENTIAL CALCULATION MODEL
EXPERIENTAL STUDY O AXIAL ORCE AND O TORQUE IN CASE O OLC45 STEEL DRILLING, USING EXPONENTIAL CALCULATION ODEL Adrian TRI 1 and Claudiu ihai NEDEZKI 1 1 Technical University of Cluj-Napoca ABSTRACT: In
More informationACTA TECHNICA NAPOCENSIS
143 TECHNICAL UNIVERSITY OF CLUJ-NAPOCA ACTA TECHNICA NAPOCENSIS Series: Applied Mathematics, Mechanics, and Engineering Vol. 59, Issue I, March, 2016 AUTOMATED EQUIPMENT FOR STAMPED SHEET METAL PARTS
More informationIntelligent Infrastructures Systems for Sustainable Urban Environment
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XV, NR. 1, 2008, ISSN 1453-7397 Daniel Amariei, Gilbert Rainer Gillich, Dan Baclesanu, Theodoros Loutas, Constantinos Angelis Intelligent Infrastructures
More informationAbout the Vibrations that Occur in the Synchronous Motor on the Asynchronous Starting
About the Vibrations that Occur in the Synchronous Motor on the Asynchronous Starting Olivian Chiver 1*, Eleonora Pop 2, Mircea Horgoș 3 Abstract: In this paper is performed a study regarding the transient
More informationA MATLAB Graphical User Interface Dedicated to the Optimal Design of the High Power Induction Motor with Heavy Starting Conditions
Maria Brojboiu, Virginia Ivanov ANALELE UNIVERSITĂŢII EFTIMIE MURGU REŞIŢA ANUL XXI, NR. 2, 2014, ISSN 1453-7397 A MATLAB Graphical User Interface Dedicated to the Optimal Design of the High Power Induction
More informationQUALITY OF CNC MACHINE TOOLS AND MONITORING OF THEIR ACCURACY
8 th Research/Expert Conference with International Participations QUALITY 2013, Neum, B&H, June 06 08, 2013 QUALITY OF CNC MACHINE TOOLS AND MONITORING OF THEIR ACCURACY Prof. Dr. Ing. Ivan Kuric University
More informationAN ALGORITHM FOR THE ADAPTIVE CONTROL OF ANTI HAIL MISSILE LAUNCH RAMPS
BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI Publicat de Universitatea Tehnică Gheorghe Asachi din Iaşi Volumul 64 (68), Numărul 2, 2018 Secţia ELECTROTEHNICĂ. ENERGETICĂ. ELECTRONICĂ AN ALGORITHM FOR THE
More informationLISTA DE LUCRA.ru. a. Lista celor 10 lucrari considerate a fi cele mai relevante pentru realizarile profesionale proprii:
LISTA DE LUCRA.ru Nume si prenume candidat: CIUCESCU Post (Nr.Grad didactic) 141 Lector NICOLETA Domeniul postului scos la concurs: Management Departament Marketing # Management Facultatea de Stiinte Economice
More informationLISTĂ LUCRĂRI ŞTIINŢIFICE
LISTĂ LUCRĂRI ŞTIINŢIFICE A. Teza de doctorat Lupu, E. "Contribuţii la recunoaşterea vorbitorului" Universitatea Tehnică Cluj-Napoca 1998 B. Cărţi şi capitole din cărţi Lupu, E. Microprocesoare. Indrumator
More informationLista lucrărilor științifice
Lista lucrărilor științifice I. Articole publicate în extenso în reviste indexate ISI a. Reviste ISI cu factor de impact 1 1. Lotrean, L.M., Tutui I. (2015). Individual and familial factors associated
More informationBROKEN ROTOR BARS DETECTION IN SQUIRREL-CAGE INDUCTION MACHINES BY MOTOR CURRENT SIGNATURE ANALYSIS METHOD
Scientific Bulletin of the Electrical Engineering Faculty Year 11 No. 3 (17) ISSN 1843-6188 BROKEN ROTOR BARS DETECTION IN SQUIRREL-CAGE INDUCTION MACHINES BY MOTOR CURRENT SIGNATURE ANALYSIS METHOD C.
More informationUSING MULTISPECTRAL SATELLITE IMAGES FOR UP-DATING VECTOR DATA IN A GEODATABASE
JOURNAL OF APPLIED ENGINEERING SCIENCES VOL. 1(14), issue 4_2011 ISSN 2247-3769 ISSN-L 2247-3769 (Print) / e-issn:2284-7197 USING MULTISPECTRAL SATELLITE IMAGES FOR VAIS Manuel Bucharest University, e-mail:
More informationROMÂNIA MINISTERUL APĂRĂRII NAŢIONALE ACADEMIA FORŢELOR TERESTRE NICOLAE BĂLCESCU SIBIU
ROMÂNIA MINISTERUL APĂRĂRII NAŢIONALE ACADEMIA FORŢELOR TERESTRE NICOLAE BĂLCESCU SIBIU Data 23 septembrie 2013 Disciplinele: Mecanică şi Rezistenţa Materialelor, Mecanisme şi Motoare, Statica construcţiilor
More informationCURRICULUM VITAE. Computationala
CURRICULUM VITAE 1. Nume: TEODORESCU-DRĂGHICESCU 2. Prenume: HORAŢIU 3. Data şi locul naşterii: 07.08.1960, Braşov 4. Cetăţenie: Română 5. Studii: Universitare/postuniversitare/doctorat Instituţia Universitare
More informationLISTA MONOGRAFII ŞI LUCRĂRILOR ŞTIINŢIFICE
UNIVERSITATEA DUNĂREA DE JOS DIN GALAŢI FACULTATEA DE MECANICĂ Str. Domnească nr. 111, Tel./Fax: +40 236 314463 800201 - Galaţi, România www.mec.ugal.ro LISTA MONOGRAFII ŞI LUCRĂRILOR ŞTIINŢIFICE elaborate
More informationAsist. univ. dr. CRISTUȚĂ ALINA-MIHAELA Lista lucrărilor / activităților reprezentative
ROMÂNIA MINISTERUL EDUCAŢIEI NAȚIONALE ȘI CERCETĂRII ȘTIINȚIFICE UNIVERSITATEA VASILE ALECSANDRI DIN BACĂU FACULTATEA DE ŞTIINŢE ALE MIŞCĂRII, SPORTULUI ŞI SĂNĂTĂŢII Calea Mărăşeşti, nr.157, Bacău, 600115
More informationMILLING PROCESS MANAGEMENT
7 th INTERNATIONAL MULTIDISCIPLINARY CONFERENCE Baia Mare, Romania, May 17-18, 2007 ISSN-1224-3264 MILLING PROCESS MANAGEMENT Mircea LOBONŢIU * Mircea HĂŞMĂŞAN ** * Professor, Ph.D. Eng., ** MSc Eng. North
More informationINTERNAL GEARS MANUFACTURING POSSIBILITY ON THE GEAR HOBBING MACHINE FD250
5 th INTERNATIONAL MEETING OF THE CARPATHIAN REGION SPECIALISTS IN THE FIELD OF GEARS INTERNAL GEARS MANUFACTURING POSSIBILITY ON THE GEAR HOBBING MACHINE FD250 Sándor RAVAI NAGY, North University of Baia
More informationTEHNICAL UNIVERSITY OF CLUJ-NAPOCA CONTRIBUTIONS AND RESEARCHREGARDING ROBOT CONTROL BASED ON IMAGE PROCESSING
Investeşte în oameni! FONDUL SOCIAL EUROPEAN Programul Operaţional Sectorial Dezvoltarea Resurselor Umane 2007 2013 Axa prioritară: 1 Educaţia şi formarea profesională în sprijinul creşterii economice
More informationREGARDING THE APPRECIATION END EVALUATION OF THE MACHINE-TOOLS FOR WOOD PROCESSING THROUGH THE QUALITY CRITERIA
4 th Research/Expert Conference with International Participations QUALITY 2005, Fojnica, B&H, November 09-12, 2005. REGARDING THE APPRECIATION END EVALUATION OF THE MACHINE-TOOLS FOR WOOD PROCESSING THROUGH
More informationDRIVEN ASYNCHRONOUS MOTORS
STUDY OF ELECTROMAGNETIC ETIC INTERFERENCE IN INVERTER DRIVEN ASYNCHRONOUS MOTORS STUDY OF ELECTROMAGNETIC ETIC INTERFERENCE IN INVERTER DRIVEN ASYNCHRONOUS MOTORS Eng. Ioan ŢILEA PhD-student 1, Prof.
More informationTeaching - Current Courses - Department of Mathematics and Computer Science, Spiru Haret University
Nicolaie POPESCU-BODORIN Curriculum Vitae 1 (print version, en) Name : Nicolaie Surname : POPESCU-BODORIN Date and place of birth : 29 Jan 1974, Rm-Sarat (Buzau), ROMANIA Contact: nb.popescu.mi # spiruharet.ro
More informationFIŞĂ DE AUTOEVALUARE ŞI DE VERIFICARE A ÎNDEPLINIRII STANDARDELOR UNIVERSITĂŢII VASILE ALECSANDRI DIN BACĂU PENTRU OCUPAREA POSTURILOR DIDACTICE
ROMÂNIA MINISTERUL EDUCAŢIEI ŞI CERCETĂRII ŞTIINŢIFICE UNIVERSITATEA VASILE ALECSANDRI DIN BACĂU Calea Mărăşeşti, Nr. 15, Bacău 600115 Tel. +40-234-542411, tel./fax +40-234-54553 www.ub.ro; e-mail: rector@ub.ro
More informationList of the works. 1. The most important works
Prof. eng. PhD Sorin ENACHE List of the works 1. The most important works 1. ENACHE, S., VLAD, I.: Induction machine. Basic notions. Dynamic regimes (in romanian), Ed. Universitaria Craiova, 2002, ISBN:
More informationFACULTY OF ELECTRONICS, TELECOMMUNICATIONS AND INFORMATION TECHNOLOGY. Ing. Norbert Ştefan Toma. PhD THESIS SUMMARY
FACULTY OF ELECTRONICS, TELECOMMUNICATIONS AND INFORMATION TECHNOLOGY Ing. Norbert Ştefan Toma PhD THESIS SUMMARY CONTRIBUTIONS TO THE EVALUATION AND MODELLING OF THE ROOMS ACOUSTICS Supervisor, Prof.
More informationSUMMARY OF PHD. THESIS RESEARCH ON ALUMINUM VACUUM CASTING OF COMPLEX PARTS
Investeşte în oameni! FONDUL SOCIAL EUROPEAN Programul Operational Sectorial pentru Dezvoltarea Resurselor Umane 2007-2013 Eng. Alina Ioana LUCA SUMMARY OF PHD. THESIS RESEARCH ON ALUMINUM VACUUM CASTING
More informationDr. Endre Jánosi Associate Professor
Dr. Endre Jánosi Associate Professor Eötvös Loránd University, Faculty of Informatics, Savaria Institute of Technology Károlyi Gáspár tér 4, Szombathely, H-9700, Hungary Office: +36 94 504 430 E-mail:
More informationA NOVEL ACTIVE INDUCTOR WITH VOLTAGE CONTROLLED QUALITY FACTOR AND SELF-RESONANT FREQUENCY
BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI Publicat de Universitatea Tehnică Gheorghe Asachi din Iaşi Tomul LX (LXIV), Fasc. 4, 2014 Secţia ELECTROTEHNICĂ. ENERGETICĂ. ELECTRONICĂ A NOVEL ACTIVE INDUCTOR
More informationPublished papers Isabela Drămnesc
Published papers Isabela Drămnesc 1 PhD Thesis 1. I. Drămnesc Case Studies on Algorithm Synthesis and Theory Exploration in Theorema, Faculty of Mathematics and Computer Science, West University of Timişoara,
More informationON THE TRANSIENTS OPTIMIZATION AND THE POWER FACTOR CORRECTION OF THE STATIC CONVERTERS
U.P.B. Sci. Bull., Series C, Vol. 70, No. 1, 2008 ISSN 1454-234x ON THE TRANSIENTS OPTIMIZATION AND THE POWER FACTOR CORRECTION OF THE STATIC CONVERTERS N. FULGA 1, M. O. POPESCU 2, Claudia POPESCU 3 Obiectivul
More informationEng. Rebeca - Maria COLDA. PhD Thesis Abstract. CONTRIBUTiONS TO THE OPTIMIZATION OF THE USAGE OF RADIO RESOURCES IN WIRELESS SYSTEMS
Investeşte în oameni! FONDUL SOCIAL EUROPEAN Programul Operaţional Sectorial Dezvoltarea Resurselor Umane 2007 2013 Axa prioritară: 1 Educaţia şi formarea profesională în sprijinul creşterii economice
More informationCURRICULUM VITAE. Education:
CURRICULUM VITAE Surname: HOREZEANU Name: MIHĂIŢĂ Date and place of birth: 18 th June 1959, Timișoara, Romania Office address King Khalid University: Faculty of Languages and Translation, Department of
More informationInter-Ing 2005 INTERDISCIPLINARITY IN ENGINEERING SCIENTIFIC CONFERENCE WITH INTERNATIONAL PARTICIPATION, TG. MUREŞ ROMÂNIA, NOVEMBER 2005.
Inter-Ing 2005 INTERDISCIPLINARITY IN ENGINEERING SCIENTIFIC CONFERENCE WITH INTERNATIONAL PARTICIPATION, TG. MUREŞ ROMÂNIA, 10-11 NOVEMBER 2005. IMPLEMENTATION OF A VIRTUAL LABORATORY FOR ELECTRIC RELUCTANT
More informationDetalii cadru didactic. Nume și prenume: Diana Elena RANF Departamentul: Ştiinţe Economice
Detalii cadru didactic Nume și prenume: Diana Elena RANF Departamentul: Ştiinţe Economice Data nașterii: 29.08.1982 Localitatea: Blaj E-mail (ROGER): diana.ranf@roger-univ.ro Telefon (ROGER): 0269 233
More informationVIRTUAL INSTRUMENTATION IN THE DRIVE SUBSYSTEM MONITORING OF A MOBIL ROBOT WITH GESTURE COMMANDS
BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI Publicat de Universitatea Tehnică Gheorghe Asachi din Iaşi Tomul LIV (LVIII), Fasc. 3-4, 2008 Secţia AUTOMATICĂ şi CALCULATOARE VIRTUAL INSTRUMENTATION IN THE
More informationSCIENTIFIC PAPERS. A. Prof. dr. Marius Tomescu
SCIENTIFIC PAPERS A. Prof. dr. Marius Tomescu ISI papers 1. Precup, R. E.; Tomescu, M. L., Stable fuzzy logic control of a general class of chaotic systems, (2015) Neural Computing & Applications Volume:
More informationLISTA DE LUCRĂRI. Candidat: DOSA I. ION Dr. / din 1999, şef lucrări / din 2004
UNIVERSITATEA DIN PETROŞANI FACULTATEA INGINERIE MECANICĂ ŞI ELECTRICĂ, DEPARTAMENTUL DE INGINERIE MECANICĂ, INDUSTRIALĂ ŞI TRANSPORTURI Concurs pentru ocuparea postului de: conferenţiar universitar, poz.
More informationNON CONTACT VIBRATION MEASUREMENTS ON PARABOLIC SURFACE ANTENNA. Dorin Simoiu 1, Liviu Bereteu 1
Analele Universităţii de Vest din Timişoara Vol. LVII, 2013 Seria Fizică NON CONTACT VIBRATION MEASUREMENTS ON PARABOLIC SURFACE ANTENNA Dorin Simoiu 1, Liviu Bereteu 1 1 Mechanical and Vibration Department,
More informationTechnical University of Cluj-Napoca, Str. C. Daicoviciu nr.15, Cluj-Napoca, Romania
FACULTY OF AUTOMATION AND COMPUTER SCIENCE DEPARTMENT OF AUTOMATION Personal information First name / Surname Address(es) SORIN-VASILE HERLE str. Dorobanţilor,nr. 71-73, corp C, sala 22, Cluj-Napoca, România
More informationA1. ACTIVITATEA DIDACTICA SI PROFESIONALA
Prof. univ. dr. ing. ZICHIL VALENTIN A1. ACTIVITATEA DIDACTICA SI PROFESIONALA Minim: 130 puncte Realizat: 1220,3 A 1.1 Cărți si Capitole în cărți de specialitate, Internaționale / Naționale (Ed. Recunoscute
More informationACTIVE CONTROL OF GEARS MODULATED VIBRATIONS IN MECHATRONICS SYSTEMS
U.P.B. Sci. Bull., Series D, Vol. 73, Iss. 2, 2011 ISSN 1454-2358 ACTIVE CONTROL OF GEARS MODULATED VIBRATIONS IN MECHATRONICS SYSTEMS Barbu DRĂGAN 1, Carmen BUJOREANU 2 Studiul controlului activ al vibraţiilor
More informationEG - Engineering Graphics
Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 717 - EGE - Department of Engineering Presentation Academic year: Degree: 2018 BACHELOR'S
More informationSUMMARY OF PHD THESIS
Investeşte în oameni! FONDUL SOCIAL EUROPEAN Programul OperaŃional Sectorial Dezvoltarea Resurselor Umane 007 013 Axa prioritară: 1 EducaŃia şi formarea profesională în sprijinul creşterii economice şi
More informationCristina Lizeta FURTUNĂ, asistent universitar doctorand
E-mail: flizetacristina@yahoo.com Cristina Lizeta FURTUNĂ, asistent universitar doctorand Pregătire profesională: Drd. în filologie Recrearea spaţiului şi timpului local prin naraţiuni contemporane (teză
More informationCompetence for Implementing EUSDR
Competence for Implementing EUSDR 14 Countries! 11 Priority areas! Many partner! Link to about 1,000 Steinbeis Enterprises + more than 5,500 experts 08.03.2013 slide 1 Steinbeis Innovation Center Steinbeis
More informationCurriculum vitae. Data naşterii:
Curriculum vitae INFORMAŢII PERSONALE Nume: Pîrghie Cristian Adresă: Str. Bistriţei nr. 1, Bl. 35, Sc. A, Ap. 12, Suceava Telefon: 0745 134812 Fax: - E-mail: parghie@fim.usv.ro Naţionalitate: Română Data
More informationEXPERIMENTAL RESULTS OF TURBO-AGGREGATE VIBROACOUSTIC DIAGNOSIS OBTAINED WITH VIBRO-EXPERT SYSTEM FOR ONE TURBO AGGREGATE IN LUKOIL REFINERY
EXPERIMENTAL RESULTS OF TURBO-AGGREGATE VIBROACOUSTIC DIAGNOSIS OBTAINED WITH VIBRO-EXPERT SYSTEM FOR ONE TURBO AGGREGATE IN LUKOIL REFINERY Cornel Marin 1, Ionel Rusa 2 1,2 VALAHIA University of Târgoviște,
More informationRadu Marinescu Lista de Lucrări
Radu Marinescu Lista de Lucrări A. Cele Mai Relevante Publicații (Art.15-a) 1 Radu Marinescu - Assessing technical debt by identifying design flaws in software systems, IBM Journal of Research and Development,
More informationLISTA DE LUCRĂRI. B. Cărţi şi capitole în cărţi (edituri recunoscute CNCSIS):
Carmen BAL LISTA DE LUCRĂRI A. Teza de doctorat 1. Carmen Bal, Cercetări şi contribuţii privind sistemele de acţionare cu debite armonice, Universitatea Tehnică din Cluj Napoca, 2006, Conducător ştiinţific
More informationREGARDING THE POPULATION DYNAMICS INVESTIGATION USING ENVIRONMENTAL INFORMATION SYSTEMS
SCIENTIFIC RESEARCH AND EDUCATION IN THE AIR FORCE-AFASES 2016 REGARDING THE POPULATION DYNAMICS INVESTIGATION USING ENVIRONMENTAL INFORMATION SYSTEMS Alin-Andrei CIORUŢA, Bogdan CIORUŢA Faculty of Science,
More informationEugen Valentin Butilă
Curriculum vitae PERSONAL INFORMATION Eugen Valentin Butilă 29, Bd. Eroilor, 500036 Brasov (Romania) +40 268 418 967 butila@unitbv.ro, bbjeno@gmail.com Sex Male Nationality Romanian WORK EXPERIENCE 5 Dec
More informationCurriculum vitae. 20 december 1975, Tirgu Mures, Mures county
Curriculum vitae Personal informations LAST NAME/First Name Address KUATSI Dénes Nimród Work: Tg. Mureş / Corunca, şos. Sighişoarei nr.1.c, Home: Tirgu Mureş, Str Paringului Nr.14, ap. 8 Phone 0265-208170,
More informationPrinciples of Engineering
Principles of Engineering 2004 (Fifth Edition) Clifton Park, New York All rights reserved 1 The National Academy of Sciences Standards: 1.0 Science Inquiry 1.1 Ability necessary to do scientific inquiry
More informationVIBRATIONS LEVEL ANALYSIS DURING THE OPERATION OF A HIGH HEAD HYDROPOWER PLANT
U.P.B. Sci. Bull., Series D, Vol. 74, Iss. 1, 212 ISSN 1454-2358 VIBRATIONS LEVEL ANALYSIS DURING THE OPERATION OF A HIGH HEAD HYDROPOWER PLANT Georgiana DUNCA 1, Diana Maria BUCUR 2, Eugen Constantin
More informationMETHODS IN OPERATIONAL TRANSMISSION POWER GRID
METHODS IN OPERATIONAL TRANSMISSION POWER GRID DANIEL MORAR, Romania NC Transelectrica, Sibiu Transmission Subsidiary, 154 Ştefan cel Mare str., Sibiu, 550321, +40269207142, daniel.morar@transelectrica.ro
More informationRESEARCHES REGARDING THE QUALITY OF PICKLES PLUMS
Analele Universităţii din Oradea, Fascicula: Ecotoxicologie, Zootehnie şi Tehnologii de Industrie Alimntară, Vol. XIV B, 2015 RESEARCHES REGARDING THE QUALITY OF PICKLES PLUMS Timar Adrian*, Purcărea Cornelia*
More informationDigital Speed Cascade Control, using Scilab / Xcos Environment
ANALELE UNIVERSITĂŢII EFTIMIE MURGU REŞIŢA ANUL XXIII, NR. 1, 2016, ISSN 1453-7397 Digital Speed Cascade Control, using Scilab / Xcos Environment Petru Chioncel, Nicoleta Gillich, Cristian Paul Chioncel,
More informationUSING SERIAL INDUSTRIAL ROBOTS IN CNC MILLING PROCESESS
BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI Publicat de Universitatea Tehnică Gheorghe Asachi din Iaşi Tomul LXI (LXV), Fasc. 3, 2015 Secţia CONSTRUCŢII DE MAŞINI USING SERIAL INDUSTRIAL ROBOTS IN CNC MILLING
More informationUnipolar Driver for Stepper Motor Control
Volume 44, Number 1, 2003 17 Unipolar Driver for Stepper Motor Control Alexandru MORAR Petru Maior University of Târgu-Mureş, Romania Department of Electrical Engineering RO - 4300 Târgu-Mureş, 1 N. Iorga
More informationCONSIDERATIONS ON USING THE VIRTUAL INSTRUMENTS FOR THE ACQUISITION AND ANALYSIS OF EXPERIMENTAL DATA FROM DYNAMIC SYSTEMS
THE ANNALS OF "DUNAREA DE JOS" UNIVERSITY OF GALATI FASCICLE XIV MECHANICHAL ENGINEERING, ISSN 1224-5615 2010 CONSIDERATIONS ON USING THE VIRTUAL INSTRUMENTS FOR THE ACQUISITION AND ANALYSIS OF EXPERIMENTAL
More informationEc. Roxana Mirela GĂZDAC SUMMARY. PhD THESIS
Investeşte în oameni! FONDUL SOCIAL EUROPEAN Programul Operaţional Sectorial Dezvoltarea Resurselor Umane 2007 2013 Axa prioritară: 1 Educaţia şi formarea profesională în sprijinul creşterii economice
More informationCURRICULUM VITAE TALMACIU, NICOLETA
CURRICULUM VITAE Informaţii personale Nume / Prenume Adresă(e) TALMACIU, NICOLETA 4, Str. ROMÂNĀ, Bloc LC2, Ap. 17, 800076, GALAŢI, ROMÂNIA Telefon(oane) Fix:0236-467885 Mobil: (facultativ) Fax(uri) E-mail(uri)
More informationNonconventional Technologies Review no. 2/2010 THE CAD-CAM DESIGN OF THE DIE CASTING MOLD FOR GYPSUM SOUND ABSORBING PANELS
THE CAD-CAM DESIGN OF THE DIE CASTING MOLD FOR GYPSUM SOUND ABSORBING PANELS Patricia UNGUR 1, Juan LOPEZ MARTINEZ 2, Adrian P. POP 1, Florin MARCU 1 1 University of Oradea, Romania 2 University of Valencia,
More informationTHE INTEGRATION OF CAD INSTRUMENTS AND DATABASES FOR THE HISTORICAL MONUMENTS RECORDS IN THE AREA OF BIGHI, MALTA
THE INTEGRATION OF CAD INSTRUMENTS AND DATABASES FOR THE HISTORICAL MONUMENTS RECORDS IN THE AREA OF BIGHI, MALTA Magdolna Eva Koncsag a *, Ioana Maria Man b a * Faculty of Exact Sciences and Engineering,
More informationCurriculum vitae Europass
Curriculum vitae Europass Informaţii personale Nume / Prenume VAIDA Liviu Călin Adresă B-dul Muncii, Nr. 103-105, Cluj-Napoca, 400641 Telefon (+40)-264-601684 Mobil: (+40)- 746-117788 E-mail Naţionalitate
More information