FrelTec GmbH. Thin Film Chip Resistor SMD High Precision (1% to 0,01%) Low TCR (2 to 50 ppm) and Thin Film current sensing

Size: px

Start display at page:

Download "FrelTec GmbH. Thin Film Chip Resistor SMD High Precision (1% to 0,01%) Low TCR (2 to 50 ppm) and Thin Film current sensing"

Madeline Booth
5 years ago
Views:

1 GmbH Mathildenstr. 0A 89 Starnberg Germany Thin Film Chip Resistor SMD High Precision (% to 0,0%) Low TCR ( to 50 ppm) and Thin Film current sensing 5/7/05 / GmbH

2 SPECIFICATION Part Number 05 * 00 * J * T05 ** D C Type Size Value Tolerance Packing TCR Power Rating : SMD Thin Film Chip Resistor High Precision Low TCR 0 **** : 00 0 : 040 The last digit is the multiplier which denotes the number of zero following F : ±% D : ±0,5% 0 : 060 C : ±0,5% 05 : 0805 B : ±0,% 06 : 06 Example: A : ±0,05% 0 : 0 T : ±0,0% 0 : 00 5 : 5 57M9 = 0,0579Ohm (for less than 0,Ohm) R00 = 0,Ohm 97R6= 97,6Ohm 9760 = 976Ohm 00 = kohm T05: Tape and Reel for 5k pc (7 reel) T0: Tape and Reel for 0kpc (7 reel) E04: Tape and reel for 4k pc (7 reel) ** T0 for 00 and 040 all Paper Type ** T05 for 060 to 0 all Paper Type ** E04 for 00 and 5 Embossed Plastic Type S : ppm/ C T : ppm/ C A : ±5ppm/ C B : ppm/ C C : ppm/ C D : ppm/ C E : ppm/ C F : 0ppm/ C G : 00ppm/ C * not all combination is possible A: /W B: /6W C: /0W D: /8W R: /6W S: /5W E: /4W G: /W H: /W I: /4W J: W M: W All products according to RoHS (0/65/EU) 5/7/05 / GmbH

3 THIN FILM CHIP RESISTORS Construction H W L L Alumina Substrate Bottom Electrode (Ag) Top Electrode (Ag-Pd) Edge Electrode (NiCr) Barrier Layer (Ni) External Electrode (Sn) Resistor (NiCr) Overcoat (Epoxy) Marking Layer L Dimensions Size L W H L L 00 0,58±0,05 0,9±0,05 0,±0,05 0,±0,05 0,5±0,05 040,00±0,05 0,50±0,05 060,55±0,0,60±0,0 for <Ohm 0,0±0,05 0,±0,0 for <Ohm 0,0±0,0 0,0±0,0 for <Ohm 0,0±0,0 0,80±0,0 0,45±0,0 0,0±0,0 0,0±0,0 0805,00±0,5,5±0,5 0,55±0,0 0,0±0,0 0,40±0,5 0,4±0,0 0,5±0,5 06,05±0,5,55±0,5 0,55±0,0 0,50±0,0 for <Ohm 0,40±0,5 for <Ohm 0,0±0,5,40±0,5 0,55±0,0 0,40±0,0 0,55±0,5 4,90±0,5,40±0,5 0,55±0,0 00 0,60±0,0 0,50±0,5 5,00±0,0 for <Ohm,45±0,5 for <Ohm 0,60±0,5 for <Ohm 6,0±0,5,0±0,5 0,55±0,0 0,50±0,5 5 0,60±0,0 6,5±0,0 for <Ohm,5±0,5 for <Ohm 0,60±0,0 for <Ohm 0,55±0,5 for <Ohm 5/7/05 / GmbH

4 Power Derating Curve For resistors operated in ambient temperatures above 70 C, power rating shall be derated in accordance with figure below, Operating Temperature Range : -55 C 55 C Related Load [%] Temperature [ C] Voltage Rating: Rated Voltage: The resistor shall have a DC continuous working voltage or a rms AC continuous working voltage at commercial-line frequency and wave form corresponding to the power rating, as determined from the following: E= Rated voltage [V] P= Power rating [W] E R P R= Nominal resistance [Ω] 5/7/05 4/ GmbH

5 THIN FILM CHIP RESISTORS Rating Series GENERAL PURPOSE CHIP RESISTORS Type Size Power Rating at 70 C Max, Wor king Volt age Max, Overlo ad Voltag e 00 /W 5V 0V 040 /6W 5V 50V 060 /6W 50V 00V 0805 /0W 00 V 06 /8W 50 V 0 /4W 50 V 00 /4W 50 V 5 /W 50 V 00V 00V 00V 00V 00V Tempe rature Coeffic ient [TCR; ppm/ C] T(±0,0%) A(±0,05%) Resistance Range [Ω] B(±0,%) C(±0,5%) D(±0,5%) *E9 Series no marking on chip 5/7/05 5/ GmbH F(±%) 49,9Ω~4,99kΩ - 49,9Ω~kΩ 49,9Ω~4,99kΩ - ±5 49,9Ω~4,99kΩ 49,9Ω~60kΩ 49,9Ω~kΩ 49,9Ω~69,8kΩ - 49,9Ω~kΩ 0Ω~55kΩ 4,7Ω~5kΩ 4,9Ω~5kΩ - ±5 4,9Ω~5kΩ 4,9Ω~00kΩ 4,7Ω~kΩ 4,7Ω~5kΩ ±5 4,9Ω ~0kΩ - 4,7Ω~kΩ Ω~MΩ 4,9Ω~00kΩ 4,9Ω ~0kΩ - ±5 4,9Ω ~49,9kΩ - 4,7Ω~MΩ Ω~MΩ 4,9Ω~499kΩ 4,9Ω ~49,9kΩ - 4,7Ω~,49M - Ω ±5 4,9Ω ~49,9kΩ 4,9Ω~499kΩ Ω~,49MΩ 4,9Ω ~49,9kΩ - 4,7Ω~,49M - Ω ±5 4,9Ω ~00kΩ 4,9Ω~499kΩ Ω~,49MΩ 4,9Ω ~00kΩ - ±5 4,9Ω ~00kΩ - 4,7Ω~MΩ Ω~MΩ 4,9Ω~499kΩ 4,9Ω ~00kΩ - - 4,7Ω~MΩ Ω~MΩ

6 Special High Power Type Size Power Rating at 70 C Max, Work ing Volta ge Max, Overloa d Voltage /0W 75V 50V /6W 00V 50V /8W /4W /4W /W 50V 00V 00V 400V 0 0 /W 00V 400V 0 00 /W 00V 400V 5 5 /4W W 00V 400V *E9 Series no marking on chip Tempe rature Coeffic ient [TCR; ppm/ C] T(±0,0%) A(±0,05%) Resistance Range [Ω] B(±0,%) C(±0,5%) D(±0,5%) 4,9Ω~5kΩ - ±5 4,9Ω~5kΩ 4,7Ω~kΩ 4,9Ω~00kΩ 4,7Ω~kΩ - 0Ω~kΩ 4,9Ω~0kΩ - ±5 4,9Ω~0kΩ 4,7Ω~5kΩ 4,9Ω~00kΩ 4,7Ω~5kΩ Ω~MΩ - 0Ω~499kΩ 4,9Ω~49,9kΩ - ±5 4,9Ω~49,9kΩ 4,9Ω~499kΩ - 0Ω~MΩ 4,9Ω~49,9kΩ - ±5 4,9Ω~49,9kΩ 4,9Ω~499kΩ 4,9Ω~49,9kΩ - ±5 4,9Ω~49,9kΩ 4,9Ω~499kΩ 4,9Ω~kΩ 4,7Ω~kΩ Ω~kΩ - 4,7Ω~00Ω Ω~00Ω F(±% ) E4, E96, 5/7/05 6/ GmbH

7 Current sensing <Ohm Type Size Power Temperature Rating Coefficient Resistance Range [mω] at 70 C [TCR; ppm/ C] ±0,5% E4, E96 ±% E4, E /6W /0W /8W /4W /4W W W /7/05 7/ GmbH

8 SPECIFICATION 54 C Ohm and higher E9 series has no marking 0805 to 5 (00 and 040 no marking) 4 digit marking, first three digits marking are significant figures; forth digit is multiplier (0 X ), examples: 54 = 54x0²=5,400 Ohm=5,4kOhm 060 examples: C (Table below) = 0 0 = kohm E-4 series digit marking, first two digits marking are significant figures; third digit is multiplier (0 X ), examples: = 0 =,kohm 060 E-96 series digit marking, first two digits marking are significant figures; third digit is multiplier (0 X ), examples: 5 = 5 0 = 5,kOhm digit Marking Table E96 Code E96 Code E96 Code E96 Code E /7/05 8/ GmbH

9 Code A B C D E F G H X Y Z Multiplier digit Marking Table E4 E SPECIFICATION 060 digit marking: <Ohm Resistance Ω 0, Ω 0,5 Ω 0,0 Ω 0,0 Ω 0,05 Ω Codes R0 R0 R5 R to 5 4 digit marking Resistance Ω 0, Ω 0,05 Ω 0,05 Ω 0,0 Ω Codes R00 R00 R050 R05 R00 SPECIFICATION Tape And Reel Package P0 E P D W F B D P A Type A B W E F P 0 P P ΦD ΦD T 00 0,40±0,05 0,70±0,05 8,00±0,0,75±0,05,5±0,05 4,00±0,0,00±0,05,00±0,05,55±0,0-0,4±0, ,70±0,05,6±0,05 8,00±0,0,75±0,05,5±0,05 4,00±0,0,00±0,05,00±0,05,55±0,05-0,40±0,0 060,0±0,05,90±0,05 8,00±0,0,75±0,05,5±0,05 4,00±0,0 4,00±0,0,00±0,05,55±0,05-0,60±0,0 0805,60±0,05,7±0,05 8,00±0,0,75±0,05,5±0,05 4,00±0,0 4,00±0,0,00±0,05,55±0,05-0,75±0,05 06,00±0,05,55±0,05 8,00±0,0,75±0,05,5±0,05 4,00±0,0 4,00±0,0,00±0,05,55±0,05-0,75±0,05 0,75±0,05,40±0,05 8,00±0,0,75±0,05,5±0,05 4,00±0,05 4,00±0,0,00±0,05,60±0,0-0,75±0,05 00,85±0,0 5,45±0,0,0±0,0,75±0,0 5,5±0,05 4,00±0,05 4,00±0,0,00±0,05,50+0,0,4 min,00±0,0 5,40±0,0 6,65±0,0,0±0,0,75±0,0 5,5±0,05 4,00±0,05 4,00±0,0,00±0,05,50+0,0,4 min,00±0,0 5/7/05 9/ GmbH

10 Cover Tape Peel off Strength Specifications: 00, 040, 060, 0805, 06, 0 peel force of top cover tape shall be between 8 to 40g and for <Ohm 0 to 00g The peel speed shall be about 00mm/min±5% for 00, 5 peel force of top cover tape shall be between 0 to 80g and for <Ohm 0 to 0g The peel speed shall be about 00mm/min±5% Type Packaging M A B C D W T 0 T0 Paper 78,0±,0 ±0,5,5±0,7 ±0,5 60,0+,0 9,5±,0,5±,0 0 T0 Paper 78,0±,0 ±0,5,5±0,7 ±0,5 60,0+,0 9,5±,0,5±,0 0 T05 Paper 78,0±,0 ±0,5,5±0,7 ±0,5 60,0+,0 9,5±,0,5±,0 05 T05 Paper 78,0±,0 ±0,5,5±0,7 ±0,5 60,0+,0 9,5±,0,5±,0 06 T05 Paper 78,0±,0 ±0,5,5±0,7 ±0,5 60,0+,0 9,5±,0,5±,0 0 T05 Paper 78,0±,0 ±0,5,5±0,7 ±0,5 60,0±,0 9,5±,0,5±,0 0 E04 Embossed 78,0±,0 ±0,5,5±0,7 ±0,5 60,0+,0,5±,0 5,5±,0 5 E04 Embossed 78,0±,0 ±0,5,5±0,7 ±0,5 60,0+,0,5±,0 5,5±,0 Stock period The performance of these products, including the solderability, is guaranteed for month, provided that they remain packed as they were when delivered and stored at a temperature of 5 C ± C and a relative humidity less than 80%RH 5/7/05 0/ GmbH

11 Lead Free Reflow Soldering Profile Recommended Land Pattern Design (mm): Size A B C 00 0,5 0,85 0,40±0, 040 0,50,50 0,60±0, 060 0,80,80 0,90±0, 0805,00,00,5±0, 06,00 4,0,70±0, 0,00 4,0,50±0, 00,60 6,40,50±0, 5 4,90 8,0,0±0, 5/7/05 / GmbH

12 Item Requirement Test Method Tol. 0,05% Tol. > 0,05% Temperature Coefficient of Resistance (T.C.R.) Short Time Overload Insulation Resistance Endurance Damp Heat with Load Bending Strength Solderability Resistance to Soldering Heat Dielectric Withstand Voltage Thermal Shock Low Temperature Operation As Spec. MIL-STD-0F Method 04 +5/-55/+5/+5/+5 C ΔR±0,05% ΔR±0,% JIS-C RCWV*,5 or Max. overload voltage whichever is ΔR±0,% for high power rating lower for 5 seconds >000 MΩ ΔR±0,05% >7kΩ ΔR±0,5% ΔR±0,% ΔR±0,5% for high power rating ±% for <Ohm MIL-STD-0F Method 0 Apply 00V DC for minute MIL-STD-0F Method 08A 70 C, Max. working voltage for 000 hrs with,5 hrs ON and 0,5 hrs OFF ΔR±0,05% ΔR±0,% MIL-STD-0 Method 0B ΔR±0.5% for high power rating 40 C, 90~95% R.H. Max. working voltage for 000 hrs with,5 hrs ON and 0,5 hrs OFF ±0,5% for <Ohm ΔR±0,05% ΔR±0,% JIS-C As Spec. for <Ohm Bending amplitude mm for 0 seconds 95% min. coverage MIL-STD-0 Method 08H 45 5 C for seconds ΔR±0,05% ΔR±0,% MIL-STD-0 Method 0E ±0,5% for <Ohm 60±5 C for 0 seconds By Type MIL-STD-0 Method 0 Max. overload voltage for minute ΔR±0,05% ΔR±0,5% MIL-STD-0 Method 07G ±0,5% for <Ohm -55 C ~50 C, 00 cycles ΔR±0,05% ΔR±0,% JIS-C ΔR±0,5% for high power rating and for hour, -65 C, followed by 45 minutes of RCWV <Ohm 5/7/05 / GmbH

13 Published by GmbH Mathildenstr, 0A; 89 Starnberg; Germany 05 GmbH, All Rights Reserved, The following applies to all products named in this publication:. The information describes the type of component and shall not be considered as assured characteristics,. Terms of delivery and rights to change design reserved,. Some parts of this publication contain statements about the suitability of our products for certain areas of application, These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned, Nevertheless, we explicitly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application, As a rule, is either unfamiliar with individual customer applications or less familiar with them than the customers themselves, For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application, 4. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified, In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e,g, in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e,g, installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component, 5. The warnings, cautions and product-specific notes must be observed, 6. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e,g, because they are classed as hazardous ), Useful information on this will be found in our Material Data Sheets, Should you have any more detailed questions, please contact our sales offices, 7. We constantly strive to improve our products, Consequently, the products described in this publication may change from time to time, The same is true for the corresponding product specifications, Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order, We also reserve the right to discontinue production and delivery of products, Consequently, we cannot guarantee that all products named in this publication will always be available, 8. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the General conditions for the supply of products and services of the electrical and electronics industry published by the German Electrical and Electronics Industry Association (ZVEI), available at www,freltec,com, 9. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies, 0. The trade name is a trademark registered or pending in Europe and in other countries, 5/7/05 / GmbH

FrelTec GmbH. Current Sensing Chip Resistor SMD

FrelTec GmbH. Current Sensing Chip Resistor SMD GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 6/8/2015 1/13 Freltec GmbH www.freltec.com SPECIFICATION Part Number 017 05 * R001 * J * T05 ** D E Size Value Tolerance Packing TCR Power Rating 017