Product Catalogue Precision Current Measurements

Transcription

1 Product atalogue 2015 Precision urrent Measurements

2 Precision urrent Transducers <! 2 T-BOX Digital urrent Transducer Box for the Highest Accuracy urrent Measurements T-PB Series 13 A, 26 A and 52 A Full-Scale Precision urrent Transducers for PB MounJng 4 6 T-100 / T A and 150 A Full-Scale Precision urrent Transducers for Rack/Panel and PB MounJng 8 < - SelecJon Guide INDEX T-200 / T-300 / T A, 300 A and 400 A Full-Scale Precision urrent Transducers for Rack/Panel MounJng 9 T-600 / T A and 1000 A Full-Scale Precision urrent Transducers for Rack/Panel MounJng PS1215 Low-Noise Bipolar Power Supply for urrent Transducers 15 Frequency Response Maximum urrent RaJngs

3 Product Overview T-BOX Digital urrent Transducer Box for the Highest Accuracy urrent Measurements Precision urrent Transducers T-BOX <! Precise and accurate current measuring system includes current transducer and measuring unit in order to obtain best-in-class performances. Internal calibrajon and thermal stabilizajon to obtain excellent stability of current measurements. Data-logger and oscilloscope modes of operajon FEATURES Digital Interface - Ethernet - USB - RS-232 < 1 ppm/k Temperature oefficient < % Full-Scale Accuracy (with High-Accuracy alibrahon OpHon) onfigurable Recorder on microsd-flash Trigger Input / Output and Alarm Output External Temperature Sensors Analog Monitor Local Display for urrent Readings Desktop or Rack MounHng in 1U Integrated Fan-less A/D Power Supply Dedicated Soeware ApplicaHon APPLIATIONS Test & Measurement Setups Sensing Element in alibrahon Systems Power Supplies Biomedical Devices The T-BOX is a stand-alone system designed to measure with the highest accuracy and precision D and A currents, providing the readings in different digital formats. The T-BOX system is developed to be used with the 0-FLUS current output DTs allowing measurements of currents up to ka. The system integrates a burden resistor and a condihoning network feeding a 24-bit temperature stabilized AD in order to have < 1 ppm/k temperature dependence. The digital sechon interfaced to the AD performs a calibrated measurement in order to eliminate the non-ideal behavior thus providing a 0.005% Full-scale current value accuracy (ophonal). The AD sampling frequency can be configured up to 100 khz allowing to acquire high frequency components and fast current transients. urrent readings can be triggered in different modes: by an external LVTTL or TTL signal; by a remote command sent to the digital interface; internally, se\ng the sampling period and the acquisihon window. The Hme-stamp, the current readings and the external temperature values are stored in a microsd Flash memory allowing long-term acquisihons. The microsd memory can be either read via Ethernet, USB or RS-232 interfaces or removed from the system and transferred to other devices in order to download its content. A temperature probe can be plugged on the back of the system if needed in order to also read and store external temperature values. A local display showing current readings as well as other se\ngs e.g. IP address, mode of operahon is present. A configurable alarm output can be used to signal to an external device if a pre-set current threshold has been exceeded.

4 About Us AEN ELS is a leading company in the design of power supplies and state-of-the-art complete electronic systems for the Physics research world, having its main focus on dedicated solujons for the parjcle accelerator community and high-end industrial applicajons. Power Supply Systems Precision urrent Measurements Beamline Electronic InstrumentaJon An integrated funchon allows to compensate for measurement setup offset currents. The unit integrates a low-noise mixed A/D power supply to connect the Technical SpecificaJons A Line Input Maximum Power onsumphon urrent Accuracy urrent ResoluHon Sampling Frequency Thermal oefficient (typ.) T-BOX directly to the A mains. The extremely compact design (1U 9 ) allows using the instrument as benchmark or to install the systems in a 1U-19 rack. T-BOX V(A), Hz 25W < 0.01 % (standard) < % (High-Accuracy ophon) 24-bit 0.1 Hz 100 khz < 1 ppm/k FM & MTA.4 MicroTA for Physics urrent Ranges Available [A] 100, 150, 200, 300, 400, 600, 1000 urrent Readings 7 ½ digits AEN ELS d.o.o. Kraška ulica, Sežana Slovenija Phone +386 (0) Fax +386 (0) Number of Memory Readings LED Indicators depending on microsd card capacity Power OK, DT connected, Status, SD reading/wrihng, AcquisiHon running Temperature Probe ResoluHon 0.1 Temperature Probe Accuracy ± 0.5 Temperature Accuracy 0.05% info@caenels.com Digital Interfaces Analog Monitor Trigger Inputs Alarm Output Mechanical Dimensions (L W H) Ethernet 10/100 Mbps TP-IP USB 2.0 RS-232 ±10 V (LEMO connector) Digital Interface (soe-trigger) TTL 5V LVTTL compahble TTL 5V Solid State Relay mm OperaHng Temperature 0 40 T-BOX also for 1U 19 installa0on < urrent Transducers Ordering OpJons WTBOX100XAA T-BOX A urrent Transducer Digital Box with Local Display and Ethernet, USB, RS-232 ommunicahon Interfaces WTBOX150XAA T-BOX A urrent Transducer Digital Box with Local Display and Ethernet, USB, RS-232 ommunicahon Interfaces WTBOX200XAA T-BOX A urrent Transducer Digital Box with Local Display and Ethernet, USB, RS-232 ommunicahon Interfaces WTBOX300XAA T-BOX A urrent Transducer Digital Box with Local Display and Ethernet, USB, RS-232 ommunicahon Interfaces WTBOX400XAA T-BOX A urrent Transducer Digital Box with Local Display and Ethernet, USB, RS-232 ommunicahon Interfaces WTBOX600XAA T-BOX A urrent Transducer Digital Box with Local Display and Ethernet, USB, RS-232 ommunicahon Interfaces WTBOX1000XA T-BOX A urrent Transducer Digital Box with Local Display and Ethernet, USB, RS-232 ommunicahon Interfaces WTBOXMBXAAA T-BOX-MB T-BOX mounhng brackets for 1U 19 cabinet installahon WTBOX1YXAAA T-BOX-Y T-BOX In-House Yearly alibrahon Service (< 0.01% accuracy) WTBOXSILXA T-BOX-HA T-BOX High-Accuracy alibrahon Service (<0.005% accuracy) opyright AEN ELS d.o.o All rights reserved. InformaHon in this publicahon supersedes all earlier versions. SpecificaHons subject to change without nohce. Rev 1.0 Printed in October 2015.

5 Product Overview <! Precision urrent Transducers T-13 T-26 T-52 urrent or Voltage Output T-PB Series losed-loop current transformer technology allows accurate monitoring of D and A bipolar currents up to ±52A with a small PB-mount device. Galvanic isolajon between primary and secondary conductor for simple current sensing at different potenjal. Standard current output and voltage output ( V -version) available. FEATURES Monitoring of D and A currents Excellent Linearity losed-loop detechon Galvanically isolated from primary Low Temperature Drie urrent-output or Voltage-output versions Wide Bandwidth High Accuracy UL 94 V-0 flammability grade LED indicates correct operahon PB-mount versions The 0-FLUS (0-FLUx urrent Sensor) family is based on a closed loop technology that allows accurate and precise monitoring of D and A currents with high bandwidth. The metal casing guarantees higher noise immunity and reduces undesired noise pick-up from external sources. The transducers T-13, T-26 and T-52 are PB-mount devices rated at maximum currents of 13A, 26A and 52A with primary to secondary raho of 1:250, 1:500 and 1:1000 respechvely. and low-noise amplifier are embedded in the T-13V, T-26V and T-52V). Main characterishcs of the 0-FLUS current transformers are negligible temperature coefficient on the secondary output current, excellent linearity and extremely low noise. D current transformers represent the ideal replacement for systems where Hall-effect sensors are used as current sensing elements and be er performances are needed. APPLIATIONS Power Supplies Sensing Element in alibrahon Systems Biomedical Devices Test & Measurement Setups Galvanic isolahon between the primary and the secondary circuits allows to measure currents at a different potenhal and simplifies interfacing when using the O-FLUS as the feedback element of current regulated power supplies. Output from the T-PB sensors can be chosen between two different versions: standard secondary current output or buffered voltage output (low temperature coefficient shunt resistor The compact mechanical dimensions of this transducer series and its limited weight allow for easy mounhng on printed circuit boards with a Through Hole (TH) topology. A plashc cover is placed on the bo om side of the device to allow for easier mounhng on the PB. Main applicahons for these current transducers are precise and stable regulated power supplies and power inverters.

6 About Us AEN ELS is a leading company in the design of power supplies and state-of-the-art complete electronic systems for the Physics research world, having its main focus on dedicated solujons for the parjcle accelerator community and high-end industrial applicajons. Due to the excellent characterishcs, the T PB transducers can be used in a variety of calibrahon, acceptance teshng and quality control applicahons ommercially available versions of the T-13, T-26 and T-52 with their respechve V voltage-output versions T-13V, T-26V and T-52V. in industrial, power generahon and automohve fields. Technical SpecificaJons T-13 T-26 T-52 urrent Transform RaHo - N 1:250 1:500 1:1000 Maximum D Primary urrent - I P(D) ±13 A ±26 A ±52 A Maximum RMS Primary urrent - I P(RMS) 9.2 A 18.4 A 36.8 A Power Supply Systems Precision urrent Measurements Beamline Electronic InstrumentaJon FM & MTA.4 MicroTA for Physics urrent Polarity Maximum D Secondary urrent - I S(D) Maximum RMS Secondary urrent - I S(RMS) Small Signal Bandwidth typ. Small Signal Bandwidth V -version typ. Bipolar ±52 ma 37 ma 500 khz > 200 khz AEN ELS d.o.o. Kraška ulica, Sežana Slovenija Phone +386 (0) Fax +386 (0) Noise (RMS) typ. Output Voltage ( V -version) - V OUT < 1 ppm (@200 Hz) < 10 ppm (@50 khz) ±10 V Output Voltage RaHo ( V version) V OUT /I P(D) 0.8 V/A 0.4 V/A 0.2 V/A Maximum Output urrent V -version Temperature oefficient T (typ.) ±15 ma < 0.5 ppm/k < 2 ppm/k ( V -version) info@caenels.com ProtecHon Signal Supply Voltage (± 6%) onnechons Mechanical (Outer) Dimensions Primary onductor Maximum Weight Yes OK Status ±15 V 16-pin through-hole PB mounhng mm Internal 300 g 0-FLUS losed Loop Technology The T-PB current transducer series is based on the T-PB Voltage Output V Version <! D + 20-kHz sine-wave primary current i.e. I P [A] and output voltage of a T-13V version i.e. V O [V] AEN ELS 0-FLUS losed-loop Technology. Ordering OpJons WT13XAAAAAA T-13 13A Primary urrent O-FLUS, PB-MounHng WT26XAAAAAA T-26 26A Primary urrent O-FLUS, PB-MounHng WT52VXAAAAA T-52 52A Primary urrent O-FLUS, PB-MounHng, WT13VXAAAAA T-13V 13A Primary urrent O-FLUS, PB-MounHng, Voltage-Output WT26VXAAAAA T-26V 26A Primary urrent O-FLUS, PB-MounHng, Voltage-Output WT52VXAAAAA T-52V 52A Primary urrent O-FLUS, PB-MounHng, Voltage-Output opyright AEN ELS d.o.o All rights reserved. InformaHon in this publicahon supersedes all earlier versions. SpecificaHons subject to change without nohce. Rev 1.0 Printed in October 2015.

7 Product Overview <! Precision urrent Transducers T-100 T-150 urrent or Voltage Output T-100 / T-150 losed-loop current transformer technology allows accurate monitoring of D and A bipolar currents up to ±100A (T-100) or up to ±150A (T-150). Galvanic isolajon between primary and secondary conductor for simple current sensing at different potenjal. Standard current output and voltage output ( V -version) available. FEATURES Monitoring of D and A currents Excellent Linearity losed-loop detechon Galvanically isolated from primary Low Temperature Drie urrent-output or Voltage-output versions Wide Bandwidth High Accuracy UL 94 V-0 flammability grade LED indicates correct operahon DB-9 onnector or PB-mount versions APPLIATIONS Power Supplies Sensing Element in alibrahon Systems Biomedical Devices Nuclear MagneHc Resonance (NMR) Test & Measurement Setups The 0-FLUS (0-FLUx urrent Sensor) family is based on a closed loop technology that allows accurate and precise monitoring of D and A currents with high bandwidth. The T-100/T-150 transducers are rated at a maximum bipolar primary current of 100A/150A with a transformahon raho of 1:1000/1:1500. Galvanic isolahon between the primary and the secondary circuits allows to measure currents at a different potenhal and simplifies interfacing when using the 0-FLUS as the feedback element of current regulated power supplies. Output from the 0-FLUS transducers can be chosen between two different versions: secondary current output or buffered voltage output (low temperature coefficient shunt resistor and low-noise amplifier are embedded in the device). Also connechon type can be chosen between the ophon a male DB-9 onnector and the P ophon 7-pin through-hole for PB mounhng. Main characterishcs of the 0-FLUS current transformers are negligible temperature coefficient on the secondary output current, excellent linearity and extremely low noise. D current transformers represents the ideal replacement for systems where Hall-effect sensors are used as current sensing elements and be er performances are needed. All T-100/T-150 devices also have different mounhng holes in order to be easily installed in different configurahons. Both self-threading screws and normal Ones can be used. Main applicahon fields for these current transducers are precise and extremely stable regulated power supplies and power inverters.

8 Due to the excellent characterishcs, the 0-FLUS transducers can be used in a variety of calibrahon, acceptance teshng and quality control applicahons ommercially available versions of the T-100/T-150 current sensors are DB-9 connector and 7-pin strip type P with their respechve About Us AEN ELS is a leading company in the design of power supplies and state-of-the-art complete electronic systems for the Physics research world, having its main focus on dedicated solujons for the parjcle accelerator community and high-end industrial applicajons. Power Supply Systems Precision urrent Measurements Beamline Electronic InstrumentaJon FM & MTA.4 MicroTA for Physics AEN ELS d.o.o. Kraška ulica, Sežana Slovenija Phone +386 (0) Fax +386 (0) info@caenels.com in industrial, power generahon and automohve fields. voltage-output versions V. Technical SpecificaJons T-100 T-150 urrent Transform RaHo N 1:1000 1:1500 Maximum D Primary urrent - I P(D) ±100 A ±150 A Maximum RMS Primary urrent - I P(RMS) 71 A 106 A urrent Polarity Maximum D Secondary urrent - I S(D) Maximum RMS Secondary urrent - I S(RMS) Small Signal Bandwidth ( ±3 db ) - BW Noise (RMS) typ. External Shunt Resistance (current output only) - R S Output Voltage ( V -version) - V OUT < 0.5 ppm (@200 Hz) < 5 ppm (@50 khz) Bipolar ±100 ma 71 ma > 500 khz > 200 khz ( V -version) 0 Ω 40 Ω ±10 V < 1.5 ppm (@200 Hz) < 8 ppm (@50 khz) Output Voltage RaHo ( V version) V OUT /I P(D) 0.1 V/A (1/15) V/A Maximum Output urrent V -version Temperature oefficient T (typ.) Linearity InducHon into Primary (typ.) ProtecHon Signal Supply Voltage (± 6%) onnechons Mechanical (Outer) Dimensions Primary onductor Hole Diameter Ø ±15 ma < 0.5 ppm/k < 2 ppm/k ( V -version) < 5 ppm < 15 ppm ( V -version) 35 µv (RMS) Yes - Primary Over-urrent ±15 V DB-9 onnector ( ) or 7-pin type ( P ) mm 16 mm OperaHng Temperatue Range Maximum Weight 250 g PS1215I PS1215V Low-Noise Power Supplies for current transducers 0-FLUS losed Loop Technology <! T-100/T pin strip connector for PB The T-100 and T-150 current transducer series is based on the AEN ELS 0-FLUS losed-loop Technology. Ordering OpJons WT100XAAAA T A Primary urrent 0-FLUS, DB-9 connector WT100PXAAAA T-100-P 100 A Primary urrent 0-FLUS, 7-pin type connechons WT100VXAAA T-100V- 100 A Primary urrent 0-FLUS, DB-9 connector, Voltage-Output WT100VPXAAA T-100V-P 100 A Primary urrent 0-FLUS, 7-pin type connechons, Voltage-Output WT150XAAAA T A Primary urrent 0-FLUS, DB-9 connector WT150PXAAAA T-150-P 150 A Primary urrent 0-FLUS, 7-pin type connechons WT150VXAAA T-150V- 150 A Primary urrent 0-FLUS, DB-9 connector, Voltage-Output WT150VPXAAA T-150V-P 150 A Primary urrent 0-FLUS, 7-pin type connechons, Voltage-Output opyright AEN ELS d.o.o All rights reserved. InformaHon in this publicahon supersedes all earlier versions. SpecificaHons subject to change without nohce. Rev 1.0 Printed in October 2015.

9 ! <! - Selec'on Table The following table summarizes data and characteris6cs of the < current transducer standard models: Model T-13 Maximum D Primary urrent urrent Transformer Ratio - N ±13 A 1:250 Bandwidth (3 db) BW >500 khz Equivalent Input Noise <1 BW = 200 Hz Temperature oefficient - T Output Type Max D Mounting Max external secondary Supply Shunt current / Max Voltage Resistor urrent Voltage voltage output PB Panel < 0.5 ppm/k ±52 ma 40 Ω T-13V >200 khz typ. < 2 ppm/k ±10.4 V n/a.! T-26 >500 khz < 0.5 ppm/k ±52 ma 40 Ω <1 BW = 200 Hz ±26 A 1:500 T-26V >200 khz typ. < 2 ppm/k ±10.4 V n/a T-52 >500 khz < 0.5 ppm/k ±52 ma 40 Ω <1 BW = 200 Hz ±52 A 1:1000 T-52V >200 khz typ. < 2 ppm/k ±10.4 V n/a T-100 >500 khz < 0.5 ppm/k ±100 ma 40 Ω <1 BW = 200 Hz ±100 A 1:1000 T-100V >200 khz typ. < 2 ppm/k ±10V n/a T-150 >300 khz < 0.5 ppm/k ±100 ma 48 Ω <1 BW = 200 Hz ±150 A 1:1500 T-150V >200 khz typ. < 2 ppm/k ±10V n/a ±15 V T-200 < 0.5 ppm/k ±200 ma 40 Ω <1.5 BW = 200 Hz ±200 A 1:1000 >100 khz T-200V typ. < 2 ppm/k ±10V n/a T-300 < 0.5 ppm/k ±200 ma 30 Ω <1.5 BW = 200 Hz ±300 A 1:1500 >100 khz T-300V typ. < 2 ppm/k ±10V n/a T-400 < 0.5 ppm/k ±200 ma 25 Ω <1.5 BW = 200 Hz ±400 A 1:2000 >100 khz T-400V typ. < 2 ppm/k ±10V n/a T-600 < 0.5 ppm/k ±400 ma 30 Ω <1.5 BW = 200 Hz >150 khz ±600 A 1:1500 T-600V typ. < 2 ppm/k ±10V n/a T-1000 < 0.5 ppm/k ±500 ma 20 Ω <1.5 BW = 200 Hz ±1000 A 1:2000 >150 khz T-1000V typ. < 2 ppm/k ±10V n/a Primary onductor Hole Diameter Internal 16 mm 30.7 mm Mechanical Dimensions 66 x 64 x 48 mm 45 x 57 x 75 mm 94 x 91 x 50 mm 107 x 91 x 50 mm Temperature Range 0 50 PREISION URRENT TRANSDUERS opyright AEN ELS d.o.o All rights reserved. Informa6on in this publica6on supersedes all earlier versions. Specifica6ons subject to change without no6ce. Rev 1.0 Printed in October 2015.

10 Product Overview <! Precision urrent Transducers T-200 T-300 T-400 urrent or Voltage Output T-200 / T-300 / T-400 losed-loop current transformer technology allows accurate monitoring of D and A bipolar currents up to ±200A (T-200), ±300A (T-300) or ±400A (T-400). Galvanic isolajon between primary and secondary conductor for simple current sensing at different potenjal. Standard current output and voltage output ( V -version) available. FEATURES Monitoring of D and A currents Excellent Linearity losed-loop detechon Galvanically isolated from primary Low Temperature Drie urrent-output or Voltage-output versions Wide Bandwidth High Accuracy UL 94 V-0 flammability grade LED indicates correct operahon DB-9 onnector for rack/panel mounhng APPLIATIONS Power Supplies Sensing Element in alibrahon Systems Biomedical Devices Nuclear MagneHc Resonance (NMR) Test & Measurement Setups The 0-FLUS (0-FLUx urrent Sensor) family is based on a closed loop technology that allows accurate and precise monitoring of D and A currents with high bandwidth. The T-200/T-300/T-400 transducers are rated at a maximum bipolar primary current of 200A/300A/400A with a transform raho of respechvely 1:1000, 1:1500 and 1:2000. Galvanic isolahon between the primary and the secondary circuits allows to measure currents at a different potenhal and simplifies interfacing when using the 0-FLUS as the feedback element of current regulated power supplies. Output from the 0-FLUS transducers can be chosen between two different versions: secondary current output or buffered voltage output (low T shunt resistor and low-noise amplifier are embedded in the device). A standard DB-9 connector is used for the transducer connechons. Main characterishcs of the 0-FLUS current transformers are negligible temperature coefficient on the secondary output current, excellent linearity and extremely low noise. D current transformers represents the ideal replacement for systems where Hall-effect sensors are used as current sensing elements and be er performances are needed. All T-200/T-300/T-400 devices also have different mounhng holes in order to be easily installed in different configurahons. Both self-threading screws and normal ones can be used. Main applicahon fields for these current transducers are precise and extremely stable regulated power supplies and power inverters. Due to the excellent characterishcs, the 0- FLUS transducers can be used in a variety of calibrahon, acceptance

11 About Us AEN ELS is a leading company in the design of power supplies and state-of-the-art complete electronic systems for the Physics research world, having its main focus on dedicated solujons for the parjcle accelerator community and high-end industrial applicajons. teshng and quality control applicahons in industrial, power generahon and automohve fields. transformers are the standard current-output and the voltage-output V version. Different output voltage rahngs e.g. ommercially available versions of the T-200/T-300/T-400 current ±2.5 V or ±5 V are available upon request for a minimum quanhty Technical SpecificaJons T-200 T-300 T-400 urrent Transform RaHo - N 1:1000 1:1500 1:2000 Maximum D Primary urrent - I P(D) ±200 A ±300 A ±400 A Maximum RMS Primary urrent - I P(RMS) 141 A 212 A 283 A Power Supply Systems Precision urrent Measurements urrent Polarity Maximum D Secondary urrent - I S(D) Maximum RMS Secondary urrent - I S(RMS) Bipolar ±200 ma 141 ma Beamline Electronic InstrumentaJon FM & MTA.4 MicroTA for Physics External Shunt Resistor Value R S 0 40 Ω 0 30 Ω 0 20 Ω Small Signal Bandwidth typ. BW > 200 khz > 200 khz > 200 khz Small Signal Bandwidth V version typ. BW 100 khz 150 khz 150 khz AEN ELS d.o.o. Kraška ulica, Sežana Slovenija Noise (RMS) typ. Output Voltage ( V -version) -V OUT < 1.5 ppm (@200 Hz) < 6 ppm (@50 khz) < 1.8 ppm (@200 Hz) < 7 ppm (@50 khz) < 2 ppm (@200 Hz) < 8 ppm (@50 khz) Output Voltage RaHo ( V version) V OUT /I P(D) 0.05 V/A (1/30) V/A V/A ±10 V Phone +386 (0) Fax +386 (0) info@caenels.com Maximum Output urrent V -version Temperature oefficient T (typ.) InducHon into Primary (typ.) Offset (with factory trimming) ProtecHon Signal Supply Voltage (± 6%) Maximum urrent onsumphon onnechons Mechanical (Outer) Dimensions Primary onductor Hole Diameter Ø Maximum Weight ±15 ma < 0.5 ppm/k < 2 ppm/k ( V -version) 5 µv (RMS) < 10 ppm/fs Yes - Primary Over-urrent ±15 V 50 ma + I S DB-9 onnector mm 30 mm 380 g PS1215I PS1215V Low-Noise Power Supplies for current transducers 0-FLUS losed Loop Technology The T-200, T-300 and T-400 models are based on the AEN ELS 0-FLUS losed-loop Technology. <! Status LED and signal Ordering OpJons WT200XAAAA T A Primary urrent 0-FLUS, DB-9 connector WT200VXAAA T-200V 200 A Primary urrent 0-FLUS, DB-9 connector, Voltage-Output WT300XAAAA T A Primary urrent 0-FLUS, DB-9 connector WT300VXAAA T-300V 300 A Primary urrent 0-FLUS, DB-9 connector, Voltage-Output WT400XAAAA T A Primary urrent 0-FLUS, DB-9 connector WT400VXAAA T-400V 400 A Primary urrent 0-FLUS, DB-9 connector, Voltage-Output opyright AEN ELS d.o.o All rights reserved. InformaHon in this publicahon supersedes all earlier versions. SpecificaHons subject to change without nohce. Rev 1.0 Printed in October 2015.

12 Product Overview <! Precision urrent Transducers T-600 T-1000 urrent or Voltage Output T-600 / T-1000 losed-loop current transformer technology allows accurate monitoring of D and A bipolar currents up to ±600A (T-600) and to ±1000A (T-1000). Galvanic isolajon between primary and secondary conductor for simple current sensing at different potenjal. Standard current output and voltage output ( V -version) available. FEATURES Monitoring of D and A currents Excellent Linearity losed-loop detechon Galvanically isolated from primary Low Temperature Drie urrent-output or Voltage-output versions Wide Bandwidth High Accuracy UL 94 V-0 flammability grade LED indicates correct operahon DB-9 onnector for rack/panel mounhng APPLIATIONS Power Supplies Sensing Element in alibrahon Systems Biomedical Devices Nuclear MagneHc Resonance (NMR) Test & Measurement Setups The 0-FLUS (O-FLUx urrent Sensor) family is based on a closed loop technology that allows accurate and precise monitoring of D and A currents with high bandwidth. The T-600 and T-1000 transducers are rated at a maximum bipolar primary current of 600A and 1000A with a transform raho of 1:1500 and 1:2000. Galvanic isolahon between the primary and the secondary circuits allows to measure currents at a different potenhal and simplifies interfacing when using the 0-FLUS as the feedback element of current regulated power supplies. Output from the transducers can be chosen between two different versions: secondary current output or buffered voltage output (low T shunt resistor and low-noise amplifier are embedded in the device). A standard DB-9 connector is used for the transducer connechons. Main characterishcs of the 0-FLUS current transformers are negligible temperature coefficient on the secondary output current, excellent linearity and extremely low noise. D current transformers represents the ideal replacement for systems where Hall-effect sensors are used as current sensing elements and be er performances are needed. All T-600 and T-1000 devices also have different mounhng holes in order to be easily installed in different configurahons. Both self-threading screws and normal ones can be used. Main applicahon fields for these current transducers are precise and extremely stable regulated power supplies and power inverters. Due to the excellent characterishcs, the T-600 and T-1000 transducers can be used in a variety of calibrahon,

13 About Us AEN ELS is a leading company in the design of power supplies and state-of-the-art complete electronic systems for the Physics research world, having its main focus on dedicated solujons for the parjcle accelerator community and high-end industrial applicajons. acceptance teshng and quality control applicahons in industrial, power generahon and automohve fields. the standard current-output T-600 and T-1000 and the voltage-output version T-600V and T-1000V. Different output voltage rahngs e.g. ommercially available versions of the T-600 and T-1000 current sensors are ±2.5 V or ±5 V are available upon request for a minimum quanhty. Technical SpecificaJons T-600 T-1000 urrent Transform RaHo - N 1:1500 1:2000 Maximum D Primary urrent - I P(D) ±600 A ±1000 A Maximum RMS Primary urrent - I P(RMS) 424 A 707 A Power Supply Systems Precision urrent Measurements Beamline Electronic InstrumentaJon FM & MTA.4 MicroTA for Physics AEN ELS d.o.o. Kraška ulica, Sežana Slovenija Phone +386 (0) Fax +386 (0) info@caenels.com urrent Polarity Bipolar Maximum D Secondary urrent - I S(D) ±400 ma ±500 ma Maximum RMS Secondary urrent - I S(RMS) 283 ma 354 ma External Shunt Resistor Value R S 0 30 Ω 0 20 Ω Small Signal Bandwidth ( -1 db ) typ. BW Noise (RMS) typ. Output Voltage ( V -version) -V OUT < 1.5 ppm (@200 Hz) < 7 ppm (@50 khz) > 150 khz < 1.5 ppm (@200 Hz) < 10 ppm (@50 khz) Output Voltage RaHo ( V version) V OUT /I P(D) (1/60) V/A 0.01 V/A Maximum Output urrent V -version Temperature oefficient T (typ.) ±10 V ±15 ma < 0.5 ppm/k < 2 ppm/k ( V -version) InducHon into Primary (typ.) 5 µv (RMS) 10 µv (RMS) Offset (with factory trimming) ProtecHon Signal < 10 ppm/fs Yes - Primary Over-urrent Supply Voltage (± 6%) Maximum urrent onsumphon onnechons Mechanical (Outer) Dimensions Primary onductor Hole Diameter Ø ±15 V 50 ma + I S DB-9 onnector mm 30 mm Maximum Weight 450 g 600 g PS1215I PS1215V Low-Noise Power Supplies for current transducers 0-FLUS losed Loop Technology The T-200, T-300 and T-400 models are based on the AEN ELS 0-FLUS losed-loop Technology. <! Status LED and signal Ordering OpJons WT600AAAAA T A Primary urrent 0-FLUS, DB-9 connector WT600VXAAAA T-600V 600 A Primary urrent 0-FLUS, DB-9 connector, Voltage-Output WT1000XAAAA T A Primary urrent 0-FLUS, DB-9 connector WT1000VXAAA T-1000V 1000 A Primary urrent 0-FLUS, DB-9 connector, Voltage-Output opyright AEN ELS d.o.o All rights reserved. InformaHon in this publicahon supersedes all earlier versions. SpecificaHons subject to change without nohce. Rev 1.0 Printed in October 2015.

14 Product Overview <! Precision urrent Transducers PS1215I PS1215V Low-Noise Power Supply for urrent Transducers PS1215 Low Noise Mixed Bipolar A/D Power Supply for opjmal operajon of the < urrent Transducers. Extended Input Range for Voltage and Frequency. I and V versions include cables for urrent and Voltage Output Transducers respecjvely. FEATURES Mixed Switching/Linear Topology 27W Bipolar Output - ±15 V Low Noise Extended A Input Range urrent-output or Voltage-output versions with cables LEDs indicate correct operahon Three-pole screw locking connector APPLIATIONS Power Supply for < Transducers Bipolar Supply for Precise InstrumentaHon Test & Measurement Setups The PS1215 is a single-output, dualvoltage mixed switching-linear power supply that is designed in order to obtain low-noise operahon and high efficiency and it is especially suited for ophmal performances of current measurement systems where switching power supplies could corrupt the measure with noise, less accuracy and less precision. The power supply is housed in a robust and compact stainless steel box that can be placed close to the supplied device in order to reduce cable lengths and minimize consequent possible noise pick-up. These power supplies are parhcularly designed for operahon with AEN ELS D urrent Transducers (DT) of the < series. The PS1215 power supply has an output voltage accuracy of ±3% on both its posihve and negahve outputs. Maximum peak-to-peak voltage noise measured at the device output terminals is rated at 4 mv (measured at full load). Output D voltages are made available through a 3-pole connector with a screw locking that allows securing the connechon. The PS1215 power supply can be ordered in three different versions, differing by the output cabling. The PS1215I version also includes the DB-9 connector and two banana -type plugs for the current output of standard transducers, the PS1215V version includes the same cabling with BN coaxial connector for voltage-output ones.

15 About Us AEN ELS is a leading company in the design of power supplies and state-of-the-art complete electronic systems for the Physics research world, having its main focus on dedicated solujons for the parjcle accelerator community and high-end industrial applicajons. Power Supply Systems Precision urrent Measurements Beamline Electronic InstrumentaJon FM & MTA.4 MicroTA for Physics Technical SpecificaJons Output PosiHve Voltage (±3%) Output NegaHve Voltage (±3%) Maximum Output Power Maximum Output urrent Output Ripple + Noise A Line Voltage Input A Line Frequency Input to Output IsolaHon Output to Earth-ase IsolaHon Hold-up Hme ooling Dimensions Weight Y-able length (T-I and T-V) Indicators PS V -15 V 27 W 900 ma 900 ma % D-1MHz % D-1 MHz V A Hz 3 kv 500 V 16 ms (typ. ) at 115 V A Natural convechon mm 600 g 3m 2 LEDs AEN ELS d.o.o. Kraška ulica, Sežana Slovenija ProtecHons Output short-circuit Output over-voltage OperaHng Temperature Range 0 50 Phone +386 (0) Fax +386 (0) info@caenels.com PS1215V A-D Power Supply and cables for Voltage-Output urrent Transducers 0-FLUS losed Loop Technology The PS1215 models are designed for optimal operation for the AEN ELS 0-FLUS current transducers. PS1215I A-D Power Supply and cables for urrent-output urrent Transducers Ordering OpJons WPS1215XAAAA PS1215 PS A/D Single Output - Dual Voltage ±15V Low Noise Power Supply - 27W max - 3m cable WPS1215IXAAA PS1215I PS A/D Single Output - Dual Voltage ±15V Low Noise Power Supply - 27W max + Y-able T-I: 3m cable with DB-9 and banana plugs (current output) WPS1215VXAAA PS1215V PS A/D Single Output - Dual Voltage ±15V Low Noise Power Supply - 27W max + Y-able T-V: 3m cable with DB-9 and BN (voltage output) opyright AEN ELS d.o.o All rights reserved. InformaHon in this publicahon supersedes all earlier versions. SpecificaHons subject to change without nohce. Rev 1.0 Printed in October 2015.

16 Frequency Response A Performances T-150 Amplitude and Phase Response <! Precision urrent Transducers Amplitude [db] Phase [deg] Frequency [Hz] Amplitude Response Frequency Amplitude D 50 khz < 0.02 db khz < 0.5 db khz < 1 db Phase Response Frequency Phase Shik D 2 khz < Hz 40 khz < khz < 2 Absolute RaJngs Absolute Maximum RaJngs for Single-Pulse Primary urrent Overload Maximum urrent RaJngs Model onjnuous* for 10 s for 1 s For 0.1 s T-13 ± 14 A ± 16 A ± 26 A ± 78 A T-13V ± 13.5 A ± 16 A ± 26 A ± 65 A T-26 ± 28 A ± 32 A ± 52 A ± 156 A T-26V ± 27 A ± 32 A ± 52 A ± 130 A T-52 ± 52 A ± 62 A ± 104 A ± 208 A T-52V ± 52 A ± 62 A ± 104 A ± 208 A T-100 ± 105 A ± 125 A ± 200 A ± 600 A T-100V ± 105 A ± 125 A ± 200 A ± 500 A T-150 ± 157 A ± 180 A ± 300 A ± 900 A T-150V ± 155 A ± 180 A ± 300 A ± 750 A T-200 ± 210 A ± 250 A ± 400 A ± 1200 A T-200V ± 205 A ± 250 A ± 400 A ± 1000 A T-300 ± 315 A ± 360 A ± 600 A ± 1800 A T-300V ± 310 A ± 360 A ± 600 A ± 1500 A T-400 ± 420 A ± 480 A ± 800 A ± 2400 A T-400V ± 410 A ± 480 A ± 800 A ± 2000 A T-600 ± 630 A ± 720 A ± 1200 A ± 3600 A T-600V ± 620 A ± 720 A ± 1200 A ± 3000 A T-1000 ± 1020 A ± 1200 A ± 2000 A ± 5000 A T-1000V ± 1010 A ± 1200 A ± 2000 A ± 5000 A * SpecificaHons over the rated currents are not guaranteed

17 Precision urrent Measurements AEN ELS d.o.o. kraška ulica Sežana Slovenija info@caenels.com