Installation and Operating Instructions for the Model IDT - For Hazardous Area Applications

Transcription

1 IDT User Manual K79650 Rev, 0//5 Installation and Operating Instructions for the Model IDT - For Hazardous rea pplications INTRINSICLLY SFE PRESSURE ND LEVEL TRNSMITTERS Model IDT Pressure Transducer Model IDT Submersible Level Transducer

2 INTRINSICLLY SFE PRESSURE ND LEVEL TRNSMITTERS Model IDT - I.S. Pressure Transmitter CONTENTS WRRNTY... GENERL... FCTORY SSISTNCE... SPECIFICTIONS... GENCY PPROVLS:... ENTITY PRMETERS... WIRING DIGRM... ELECTRICL CONNECTION OPTIONS... PROCESS CONNECTION OPTIONS... MODEL NUMERING...5 TLE #...8 TLE #...9 INSTLLTION...0 CLE SUPPORT OPTION...0 HZRDOUS LOCTION PPROVL SUPPLEMENTL INSTRUCTIONS... STNDRDS ND PPROVLS... PPROVL CERTIFICTES... CONTROL DRWINGS...5 LEL DRWINGS...9 DESCRIPTION The Model IDT intrinsically safe pressure transmitters are specifically designed for use in hazardous area pressure measurement applications. Intrinsically safe approvals for the IDT includes FM US and FM Canada (cfmus), TEX and IECEx for worldwide users pressure measurement requirements. The IDT offers premium performance and versatility of use for many applications including upstream oil and gas, general industrial end users, and OEMs. The IDT offers precision accuracy at +/-0.% FS (FSL) typical. The design incorporates a stainless steel isolation diaphragm and 6 stainless steel construction for use with most media types. The IDT is offered in pressure ranges from full vacuum to 5000 psig and 5 psia through 00 psia. The transducer also accepts both regulated and unregulated excitation voltages and provides output signals such as -5 VDC, -6 VDC, 0-5 VDC, 0.5 to.5vdc and -0 m. The IDT transducer is manufactured in the United States under ISO 900:008 and meets RR. FETURES: Rugged Design for tough applications. 6 Stainless Steel Construction and Wetted Materials- Resists the corrosive effects of caustic medias or wash downs and is compatible with a variety of media. Digitally Compensated- Low total accuracy errors for interchangeability and high precision measurements. Multiple pressure port options- Ease of installation and attachment with no adapters required. 0.% Typical ccuracy- Offers superior accuracy to competitive models and can be used on critical applications. Factory Calibrated for Pressure and Temperature-No need for field calibration. Plug and Play reliability. Wide Pressure Ranges and Types (PSIG,PSI,PSIS, Compound)- Can be used in a variety of applications. RFI/EMI Protection-For use in high noise environments Reverse Polarity Protection- Installation safety and not damaged by reverse wiring. Custom Designs vailable- OEM oriented to special needs. Please call or mctpmt.sales@ametek.com Numerous Electrical Outputs and Connections- llows quick hook-up and use with standard process equipment, conventional receivers, and compatible with microprocessors. Low Power Voltage Output- llows for battery operation and longer life. METEK PMT Products 80 Pennsylvania lvd Feasterville, P 905 U.S.. Tel: Fax: mctpmt.sales@ametek.com

3 INTRINSICLLY SFE PRESSURE ND LEVEL TRNSMITTERS Model IDT - I.S. Pressure Transmitter WRRNTY METEK US Gauge/PMT Products warrants that the Products and Services shall be free from all defects in design and workmanship and fit for the particular purposes for which they are intended, and in strict accordance with the specifications, drawings, designs or other requirements (including performance specifications) approved by US Gauge for a period of one () year from the date of shipment unless otherwise noted. GENERL The Model IDT Intrinsically Safe industrial and submersible pressure transmitters are specifically designed for use in hazardous area pressure measurement applications. Intrinsically safe approvals include FM, TEX and IECEx for worldwide users pressure measurement requirements. ll transmitters should be installed, maintained and operated in compliance with all NEC and other applicable codes ny modifications to the METEK transmitter will void the warranty and IS rating. FCTORY SSISTNCE METEK PMT Products 80 Pennsylvania lvd Feasterville, P 905 U.S.. Tel: Fax: mctpmt.sales@ametek.com Please provide the following information: Instrument Model Number Sensing Element Model Number and Length Original Purchase Order Number Material being measured Temperature Pressure gitation rief description of the problem Checkout procedures that have failed

4 Model IDT - I.S. Pressure Transmitter Specification Pressure Ranges (Consult Factory for Non Standard Ranges) C Including Linearity (FSL) Hysteresis & Repeatability VCUUM Up to 5000 psi PSIG,PSI vailable 0 PSI 0 PSI 0-6 psi ±0.% FS TYP, ±0.5% FS MX ±.0% FS MX ±0.5% fs MX ±0.5% FS MX Yr. Stability < 0.5% FS <.0% FS <.0% fs < 0.5% FS Load Limitation 0K Ohms MIN (ll Voltage Outputs) 600 OHMS MX (-0M) Input/Output Pressure Response Time (Voltage) Power On Response Time (Voltage) Power (Voltage) Total Error and (Includes Temperature Effects, Zero & Span Set) Vibration Shock EMC Process Wetted Material Electrical Housing Material -8VDc/-0m, 9-5VDC/-6VDC, 8-5VDC/-5VDC, 8-5VDC/0.5-.5VDC, 8-5VDC/0-5VDC <5mSEC <00mSEC 9VDC INPUT, TYPICL ±% FS ±.5% FS MX ±.5% fs MX ±.5% FS MX 0G, Hz 0G 0 V/m PER EN66-6 Stainless Steel 6 Stainless Steel GENCY PPROVLS: ENTITY PRMETERS U.S/CND IS CLSS I, DIV, GROUPS,,C,D IS CLSS II, DIV, GROUPS E,F,G; CLSS III IS CLSS I, DIV, ZONE 0; Ex/Ex IIC T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P FM/IS CONTROL DWG K7505 (-0m) OR K7505 (VOLTGE) CLSS I, DIV, GROUPS,,C,D CLSS II, DIV, GROUPS E,F,G; CLSS III Zone Ex/Ex n IIC T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P TEX/IECEx II G Ex ia IIC Ga T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P TEX FMTEX006X IECEx FMG.00X TEX/IECEx CONTROL DWG K7505 (-0m) OR K75055 (VOLTGE) II G Ex n Gc T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P FMTEX007X IECEx FMG.00 m: VOLTGE: Ui = 8Vdc Ui = 5Vdc Ii = 00m Ii = 8m Pi = 0.7W Pi = 0.7W Ci = 5nF Ci = 97uF Li =.5uH Li =.5uH

5 Model IDT - I.S. Pressure Transmitter WIRING DIGRM Common For DIN Connectors Voltage Connector Pin Function +V In -V In V Out GND Ground Current Connector Pin Function +V In -V In GND Ground Voltage 6 Pin Connector Only Color Red lack White Function +V In -V In V Out Green/Shield Ground Current Color Red lack Pin Outs +9V C D E nalog In GND Case GND Common For all Cable Options Function +V In -V In Green/Shield Ground Note: See Control Drawings for Hazardous rea Installation

6 Model IDT - I.S. LIMITS Pressure OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. Transmitter D GND CURRENT CONNECTOR PIN ELECTRICL CONNECTION OPTIONS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. COMM ON FOR DIN CONNECTORS VOLTGE CONNECTOR FUNCTIO N PIN +V in -Vin Vou t GROUND FUNCTION + Vin -Vin GND GROUND PINOUTS, +9V C, NLOG IN D, GND E, CSE GND COMM ON FOR LL CLE OPTIONS VOLTGE COLOR FUNCTION R ED + Vin LCK -Vin WHITE V ou t GREEN/SHIELD GROUND CURRENT COLOR FUNCTION R ED + Vin LCK -Vin GREEN/SHIELD GROUND VIEW VIEW IS WITH IS WITH PLUG PLUG REMOVED.7.8 VIEW VIEW IS WITH IS WITH PLUG PLUG REMOVED ING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT LL SHEETS OF THIS DOCUMENT RE THE SME REVISION LEVEL. S IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS COMM.9 ON FOR LL CLE OPTIONS REFER TO SHEET FOR REVISION HISTORY C. VOLTGE COMM ON FOR DIN CONNECTORS. COLOR FUNCTION VOLTGE R ED + Vin CONNECTOR LCK -Vin FUNCTIO N PIN WHITE V ou t +V in GREEN/SHIELD GROUND -Vin Vou t PINOUTS CURRENT GND GROUND ERVED ITHER D ND THIS ND DRWING NEITHER THIS THIS NOR DRWING NY INFORMTION NOR NOR NY NY INFORMTION IT IT IT IT, +9V COLOR FUNCTION D CURRENT R ED + Vin LL SHEETS LL OF THIS DOCUMENT OF THIS RE THE SME RE THE REVISION LEVEL. USED OUT OR R USED WRITTEN WITHOUT PERMISSION WRITTEN FROM PERMISSION METEK FROM FROM INC. METEK INC. INC. C, NLOG IN LL SHEETS OF THIS DOCUMENT RE THE SME REVISION LEVEL. CONNECTOR RE D IP IP IN RE MS-65-. DEFINED IN IN MS-65-. COMM ON FOR COMM LL ON CLE ON FOR FOR OPTIONS LL LL CLE CLE OPTIONS LCK -Vin FUNCTION REFER TO SHEET REFER TO TO FOR SHEET REVISION FOR FOR HISTORY. REVISION HISTORY. PIN D, GND GREEN/SHIELD GROUND + Vin E, CSE GND VOLTGE VOLTGE -Vin GND GROUND DIN 650 FORM COLOR FUNCTION DIN COLOR 650 FUNCTION FORM C (MTING CONNECTOR (MTING CONNECTOR PIN CONNECTOR /- NPT WITH CLE /- NPT FEMLE & R ED R ED R+ RED Vin ED + Vin + + Vin Vin RSS STRIN RELIEF SUMERSIL LCK LCK LCK -Vin -Vin -Vin SUPPLIED) SUPPLIED) (NO MTING CONNECTOR) (SEE MODEL CODE DIN 650 Form RSS STRIN RELIEF WITH CLE STYLE - WHITE WHITE DIN VWHITE ou t 650 V ou VVt ou Form out t C 6 Pin Connector /-/ FOR LENGTHS) NPT with Cable WITH CLE GREEN/SHIELD GREEN/SHIELD GROUND GROUND (SEE MODEL CODE STYLE - (Mating Connector Supplied) (Mating Connector Supplied) (No Connector) (See Model Code for Lengths) (SEE MODEL CODE FOR LENGTHS) PINOUTS PINOUTS CURRENT CURRENT DFOR LENGTHS), +9V,, +9V, +9V COLOR FUNCTION COLOR FUNCTION Not FM pproved.5 D D.5 R ED RNot ED R+ RED Vin ED FM pproved + Vin + + Vin Vin.5.5 C, NLOG C, C, IN NLOG IN IN IN LCK LCK LCK -Vin -Vin -Vin D, GNDD, D, D, GND THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR GREEN/SHIELD NY INFORMTION GREEN/SHIELD GROUND IT GROUND LL SHEETS OF THIS DOCUMENT E, CSE GND E, E, E, CSE GND GND ELECTRICL CONNECTION OPTIONS RE THE SME REVISIO CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. COMM ON FOR LL CLE OPTIONS REFER TO SHEET FOR REVISION HISTORY. THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT LL SHEETS OF THIS DOCUMENT RE THE SME REVISIO CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. VOLTGE LIMITS COMM OF ON CCEPTLE FOR DIN CONNECTORS WORKMNSHIP RE DEFINED IN MS-65-. COMM ON FOR LL CLE OPTIONS REFER TO SHEET FOR REVISION HISTORY..7 COLOR FUNCTION.50 VIEW IS WITH PLUG REMOVED.88 VOLTGE R ED VOLTGE + Vin COMM CONNECTOR ON FOR DIN CONNECTORS FUNCTIO N COLOR LCK FUNCTION -Vin PIN WHITE V ou t VOLTGE R ED + Vin ITH PLUG REMOVED +V in GREEN/SHIELD GROUND CONNECTOR LCK -Vin FUNCTIO -Vin N PIN Vou t WHITE V ou t.5 +V in.5 PINOUTS GND GROUND GREEN/SHIELD CURRENT D GROUND.5 -Vin, +9V COLOR FUNCTION Vou t CURRENT PINOUTS R ED C, NLOG IN CURRENT + Vin CONNECTOR GND GROUND D LCK -Vin FUNCTION, D, +9V COLOR FUNCTION PIN GND GREEN/SHIELD GROUND CURRENT R ED + Vin + Vin C, E, CSE NLOG GNDIN.57 CONNECTOR LCK -Vin FUNCTION -Vin PIN D, GND GND GROUND GREEN/SHIELD GROUND + Vin E, CSE GND -Vin.7.7 UG REMOVED GND GROUND C TYPICL FOR' LL.57 MODELS VIEW IS WITH PLUG REMOVED SUMERSILE.7 /NPT CONDUIT VIEW IS WITH.9.50 VIEW IS WITH PLUG REMOVED.88 PLUG REMOVED SUMERSILE WITH CLE WITH CLE /- NPT WITH CLE.. /- NPT FEMLE & RSS STRIN RELIEF 650 FORM C C C DIN 650 FORM C 6 PIN CONNECTOR STYLE - WG CLE STYLE - WG CLE VIEW IS WITH PLUG REMOVED (SEE MODEL CODE RSS STRIN RELIEF WITH CLE G CONNECTOR (MTING CONNECTOR (NO MTING CONNECTOR) FOR LENGTHS).8 STYLE - WG CLE STYLE - WG CLE WITH CLE (SEE MODEL CODE UPPLIED) SUPPLIED) (SEE MODEL CODE FOR LENGTHS) FOR LENGTHS) ELECTRICL /8 HEX CONNECTION OPTIONS.66 7/8 HEX /8 HEX C /8 HEX..66 FORM C C 6 PIN CONNECTOR /- NPT WITH CLE /- NPT FEMLE & RSS STRIN RELIEF SUMERSILE WITH CLE SUMERSILE /NPT CONDUIT 6 PIN NPT NPT & NECTOR NNECTOR 6 PIN CONNECTOR C /- NPT WITH.6 CLE /- NPT FEMLE.9 & RSS STRIN.9 RELIEF SUMERSILE WITH CLE SUMERSILE.50 /NPT CONDUIT. (NO MTING CONNECTOR) (SEE MODEL CODE RSS STRIN RELIEF WITH CLE STYLE - WG CLE WITH CLE ) - ED) (NO MTING CONNECTOR) (SEE MODEL CODE/- NPT RSS Female STRIN & rass RELIEF. rass Strain WITH Relief CLE with Cable Submersible STYLE - WG with CLE Cable Submersible WITH / CLE NPT Conduit FOR LENGTHS) FOR LENGTHS) WITH.7 CLE WITH CLE (SEE MODEL (SEE CODE MODEL CODE STYLE - WG STYLE - - CLE WG CLESTYLE - WG STYLE - - CLE WG CLE (SEE Strain TYPICL MODEL Relief (SEE FOR' CODE with MODEL Cable CODE FOR (See LENGTHS) Model FOR Code LENGTHS) for Lengths) Style - WG Cable STYLE - WG STYLE - - with CLE WG Cable CLE FOR LENGTHS) FOR LENGTHS) (See Model LL MODELS Code for Lengths) /-8 NPT MLE PROTECTED FLUSH /- NPT MLE /- NPT MLE Style - WG Cable Style - WG Cable /-8 NPT MLE HIGH PRESSURE SUMERSILE (SUMERSILE VE LOW PRESSURE HIGH PRESSURE LOW PRESSURE WITH NYLON SNUNOSE ELECTRICL CONNECTION OPTIONS Style - WG Cable SUMERSILE /NPT CONDUIT SUMERSILE WITH CLE WITH CLE DIN 650 FORM /- NPT WITH CLE /- NPT FEMLE & RSS STRIN RELIEF DIN 650 FORM C 6 PIN CONNECTOR STYLE - WG CLE SUMERSILE (MTING CONNECTOR (SEE MODEL CODE RSS STRIN RELIEF PROCESS CONNECTION OPTIONS (MTING CONNECTOR (NO MTING CONNECTOR) WITH CLE STYLE - WG /NPT CLE CONDUIT SUMERSILE /- STYLE - WG WITH CLE CLE STYLE WITH - WG CLE CLE DIN SUPPLIED) 650 FORM FOR NPT LENGTHS) WITH CLE /- WITH NPT CLE FEMLE & RSS DIN (SEE MODEL STRIN CODE RELIEF (MTING CONNECTOR SUPPLIED) 650 FORM C 6 PIN CONNECTOR STYLE - WG CLE STYLE - WG CLE (SEE MODEL CODE RSS (SEE MODEL STRIN CODE RELIEF (MTING CONNECTOR (NO MTING CONNECTOR) FOR WITH LENGTHS) CLE STYLE - WG CLE STYLE - WG CLE SUPPLIED) FOR LENGTHS) WITH CLE (SEE MODEL CODE SUPPLIED) FOR LENGTHS).69 /- NPT MLE LOW PRESSURE NPT /- MLE NPT NPT MLE H PRESSURE HIGH PRESSURE.8.69 S:\PMT-ENG\Project S:\PMT-ENG\Project (EWO)\E996 (EWO)\E996 DCT - DCT IS Transducer\) - IS Transducer\) Design_Phase\dwg\ Design_Phase\dwg\ /8 HEX /8 /8 HEX HEX PROCESS CONNECTION OPTIONS /8 HEX /- NPT MLE HIGH PRESSURE /8 HEX7/8 7/8 HEX HEX.8 S:\PMT-ENG\Project (EWO)\E996 DCT - IS Transducer\) Design_Phase\dwg\.7.7 TYPICL FOR' TYPICL FOR' LL MODELS LL LL MODELS 7/8 HEX /-8 NPT MLE LOW PRESSURE /8 HEX.7..7 TYPICL.7FOR' TYPICL LL MODELS FOR' LL MODELS..69 PROCESS CONNECTION OPTIONS /-8 NPT MLE HIGH PRESSURE..50 FOR LENGTHS) (SEE MODEL CODE FOR LENGTHS) ELECTRICL CONNECTION OPTIONS ELECTRICL CONNECTION.50 OPTIONS.50 SUMERSILE WITH NYLON SNUNOSE PROCESS CONNECTION OPTIONS PROCESS CONNECTION OPTIONS.. FLUSH DIPHRGM FLUSH DIPHRGM (SUMERSILE (SUMERSILE VERSION VERSION ONLY) ONLY) 7/8 HEX /8 HEX /-8 NPT /-8 MLE NPT NPT MLE /-8 NPT MLE NPT PROTECTED FLUSH DIPHRGM U.S.GUGE DIVISION U.S.GUGE DIVISION HIGH PRESSURE 7/8 /-8 NPT MLE PROTECTED FLUSH DIPHRGM HIGH HEX /8 HEX PRESSURE SUMERSILE SUMERSILE /8 HEX LOW PRESSURE LOW PRESSURE 7/8 HEX (SUMERSILE (SUMERSILE VERSION VERSION ONLY) ONLY) PMT PRODUCTS PMT PMT PRODUCTS WITH NYLON WITH SNUNOSE NYLON SNUNOSE 80 PENNSYLVNI OULEVRD, PENNSYLVNI FESTERVILLE, OULEVRD, P 905 FESTERVILLE, P 905 P P 905 /8 HEX 7/8 HEX SIZE SIZECGE SIZE CODE CGE CODE CGE DWG CODE NO. DWG DWG NO. DWG NO. NO. REV REV REV REV PROCESS CONNECTION OPTIONS C C 6508 C 6508 C K C C K PROTECTED FLUSH DIPHRGM /- NPT MLE /-8 NPT MLE /- NPT MLE /-8 NPT SCLE MLE: SCLE SCLE: WEIGHT : : SUMERSILE WEIGHT WEIGHT SHEET OF SHEET SHEET OF (SUMERSILE OF LOW PRESSURE VERSION ONLY) /- NPT MLE LOW PRESSURE HIGH PRESSURE HIGH PRESSURE WITH NYLON SNUNOSE PROTECTED FLUSH DIPHRGM /-8 NPT MLE /- NPT MLE /- NPT MLE /-8 NPT MLE NPT MLE Submersible SUMERSILE LOW PRESSURE with (SUMERSILE Protected Flush VERSION Diaphragm ONLY) LOW PRESSURE HIGH PRESSURE HIGH PRESSURE WITH NYLON SNUNOSE Low Pressure High Pressure Low Pressure High Pressure Nylon Snubnose (Submersible Version Only). PROTECTED FLUSH DIPHRGM (SUMERSILE VERSION ONLY).. FLUSH DIPHRGM (SUMERSILE VERSION ONLY) Flush Diaphragm (Submersible Version Only) U.S.GUGE DIVISION PMT PRODUCTS 80 PENNSYLVNI OULEVRD, FESTERVILLE, P SIZE CGE CODE DWG NO..50. C 6508 C K SCLE : WEIGHT SHEET OF. REV U.S.GUGE DIVISION PMT PRODUCTS 80 PENNSYLVNI OULEVRD, FESTERVILLE, U.S.GUGE P 905 DIVISION PMT PRODUCTS 80 SIZE PENNSYLVNI CGE OULEVRD, CODE FESTERVILLE, DWG NO. P 905 C 6508 FLUSH DIPHRGM (SUMERSILE VERSION ON FLUSH DIPHRGM (SUMERSILE VERSION ON SIZE SCLE C CGE CODE WEIGHT 6508 DWG NO. : SCLE : WEIGHT.. C K K SHEET C SHEET O

7 Model IDT - I.S. Pressure Transmitter MODEL NUMERING Transmitter Type D Digitally compensated pressure transmitter for hazardous use Protection Type and Temperature code D D IP IC NE Division, Zone, potted electronics Division, Zone, conformal coated electronics Division, Zone 0, Intrinsically safe, potted electronics Division, Zone 0, Intrinsically safe, conformal coated electronics No protection Electrical Input/output C D E F -8Vdc/-0m 9-5Vdc/-6Vdc 8-5Vdc/-5Vdc 8-5Vdc/0.5-.5Vdc 8-5Vdc/0-5Vdc Construction Type T ackside applied pressure Topside applied pressure Electrical Connector FM pproved Submersible Division and Zone Safety pproval Ingress Protection IP/Type NV NV NV NV NV5 NV6 NV7 NV8 NV9 NV Submersible transmitter with Viton grommet, polyurethane cable Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, vent tube, polyurethane cable Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, vent tube, polyolefin cable Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, vent tube, polyurethane cable,support bracket Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, vent tube, Teflon cable Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, Teflon cable Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, polyurethane cable, support bracket Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, vent tube, polyolefin cable, support bracket Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, vent tube, Teflon cable, supoport bracket Div, Zone 0 IP68,Type 6P Submersible transmitter with Viton grommet, Teflon cable, support bracket Div, Zone 0 IP68,Type 6P CV Submersible transmitter with Viton grommet, polyurethane cable,/ NPT female conduit adapter Div, Zone 0 Div, Zone IP68,Type 6P CV Submersible transmitter with Viton grommet, vent tube, polyurethane cable, / NPT female conduit adapter Div, Zone 0 Div, Zone IP68,Type 6P CV Submersible transmitter with Viton grommet, vent tube, polyolefin cable, / NPT female conduit adapter Div, Zone 0 Div, Zone IP68,Type 6P CV5 Submersible transmitter with Viton grommet, vent tube, Teflon cable, / NPT, female conduit adapter Div, Zone 0 Div, Zone IP68,Type 6P CV6 Submersible transmitter with Viton grommet, Teflon cable, / NPT female conduit adapter Div, Zone 0 Div, Zone IP68,Type 6P Continued on Next Page D XX X X XXX 5

8 Model IDT - I.S. Pressure Transmitter MODEL NUMERING (CONTINUED) Electrical Connector FM pproved Industrial Division and Zone Safety pproval Protection IP/Type CS 6 pin connector Div, Zone 0 IP60 HM / NPT male with WG cable Div, Zone 0 Div, Zone IP67, Type X PT WG cable with PVC jacket Div, Zone 0 IP65, Type X PT WG cable with PVC jacket Div, Zone 0 IP65, Type X PT WG cable with Teflon jacket Div, Zone 0 IP65, Type X PT WG cable with PVC jacket, / NPT female conduit adapter Div, Zone 0 Div, Zone IP65, Type X PT5 WG cable with Teflon jacket, / NPT female conduit adapter Div, Zone 0 Div, Zone IP65, Type X PT6 WG cable with PVC jacket, / NPT female conduit adapter Div, Zone 0 Div, Zone IP65, Type X Non FM pproved Industrial Model Style DM DIN 650- plus mate No approval N/ DN DIN 650-, no mate No approval N/ DCM DIN 650-C, plus mate No approval N/ DCN DIN 650-C, no mate No approval N/ Cable Length None 8 C D 6 E 8 F 60 Z Specify inches as separate line item on order 5 0 C 0 D 0 E 0 F 50 G 00 Z Specify feet as separate line item on order NSI Seal.7.0 D Dual seal per NSI not evaluated by FM N None, seal not approved per NSI not evaluated by FM S Single seal per NSI,7,0 - not evaluated by FM Continued on Next Page D XX X X XXX XX X 6

9 Model IDT - I.S. Pressure Transmitter MODEL NUMERING (CONTINUED) Process Connection 0 / NPT male 0 / NPT male with nylon snubnose (submersible model) 0 / NPT male with stn stl snubnose (submersible model) 0 / NPT male 05 / NPT female 06 / NPT female with nylon snubnose (submersible model) 07 Flush diaphragm 08 Protected flush diaphragm Other optional process connectors Isolation Fill F M S -Z Fluorolube Mineral oil Silicone dditional fills Diaphragm Material and Thickness H H M M S S -Z Hastelloy, 0.00 thick Hastelloy, 0.00 thick Monel, 0.00 thick Monel, 0.00 thick Stainless steel, 0.00 thick Stainless steel, 0.00 thick dditional diaphragms and thicknesses Pressure Type C E G V S -Z bsolute Compound (minus pressure to full scale) Compound equal (minus pressure equals full scale) Gage Vacuum (-.7 to full scale) Static (sealed sensor, no atmospheric reference) Other pressure types Pressure Range xxxxx psi: Standard psi ranges,, 6, 5, 0, 60, 00, 50, 00, 00, 500, 000, 000, 000, 5000 xxxx 0- bar: Standard bar ranges 0.07, 0.0, 0.0,,,, 6, 0,.5, 0, 0, 60, 00, 0, 00, 0 Non Safety Related Options X00-X999 dditional metek options, or customer requested options D XX X X XXX XX Safety/pproval Fields X XX X XX X XXXXX XXXX Non Safety /pproval Fields 7

10 Electrical Connector CS FM pproved Industrial Model Style 6 pin connector (Sealed Ranges Only - PSIS or PSI) Division and Zone Safety pproval HM / NPT male with WG cable Div, Zone 0 Div, Zone Ingress Protection IP / Type mbient Temp. Range Protection Type IC, D Coated Electronics T Temperature Code mbient Temp. Range Protection Type IP, D Potted Electronics T6 Temperature Code Process Temperature Limits Compensated Temperature Range Div, Zone 0 IP60-0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C IP67, Type X -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C PT WG cable with PVC jacket Div, Zone 0 IP65, Type X -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C PT WG cable with PVC jacket Div, Zone 0 IP65, Type X -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C PT WG cable with Teflon jacket Div, Zone 0 IP65, Type X -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C PT WG cable with PVC jacket, / NPT female conduit adapter PT5 Model IDT - I.S. Industrial Pressure Transmitter TLE # WG cable with Teflon jacket, / NPT female conduit adapter PT6 WG cable with PVC jacket, / NPT female conduit adapter Non FM pproved Industial Model Style Div, Zone 0 Div, Zone Div, Zone 0 Div, Zone Div, Zone 0 Div, Zone IP65, Type X -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C IP65, Type X -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C IP65, Type X -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -0 C to 00 C -5 C to 75 C mbient Temp. Range Coated Electronics mbient Temp. Range Potted Electronics Process Temperature Limits Compensated Temperature Range DM DIN 650- plus mate No approval N/ -0 C <= Ta <= 80 C -0 C <= Ta <= 80 C -0 C to 00 C -5 C to 75 C DN DIN 650-, no mate No approval N/ -0 C <= Ta <= 80 C -0 C <= Ta <= 80 C -0 C to 00 C -5 C to 75 C DCM DIN 650-C, plus mate No approval N/ -0 C <= Ta <= 80 C -0 C <= Ta <= 80 C -0 C to 00 C -5 C to 75 C DCN DIN 650-C, no mate No approval N/ -0 C <= Ta <= 80 C -0 C <= Ta <= 80 C -0 C to 00 C -5 C to 75 C Standard Pressure Ranges Overpressure urst Pressure PSI:,, 6, 5, 0, 60, 00, 50, 00,00, 500, 000,000, 000, 5000 X X R: 0.07, 0., 0.,,,,,6,0,.5,0,0,60,00,0,00,0 X X 8

11 Model IDT - I.S. Submersible Level Transmitter TLE # Electrical Connector NV NV NV NV NV5 NV6 NV7 NV8 NV9 NV CV CV CV CV5 CV6 FM pproved Industrial Model Style Submersible transmitter with Viton grommet, polyurethane cable Submersible transmitter with Viton grommet, vent tube, polyurethane cable Submersible transmitter with Viton grommet, vent tube, polyolefin cable Submersible transmitter with Viton grommet, vent tube, polyurethane cable,support bracket Submersible transmitter with Viton grommet, vent tube, Teflon cable Submersible transmitter with Viton grommet, Teflon cable Submersible transmitter with Viton grommet, polyurethane cable, support bracket Submersible transmitter with Viton grommet, vent tube, polyolefin cable, support bracket Submersible transmitter with Viton grommet, vent tube, Teflon cable, supoport bracket Submersible transmitter with Viton grommet, Teflon cable, support bracket Submersible transmitter with Viton grommet, polyurethane cable,/ NPT female conduit adapter Submersible transmitter with Viton grommet, vent tube, polyurethane cable, / NPT female conduit adapter Submersible transmitter with Viton grommet, vent tube, polyolefin cable, / NPT female conduit adapter Submersible transmitter with Viton grommet, vent tube, Teflon cable, / NPT, female conduit adapter Submersible transmitter with Viton grommet, Teflon cable, / NPT female conduit adapter Division and Zone Safety pproval Ingress Protection IP/Type mbient Temp. Range Protection Type IC, D Coated Electronics T Temperature Code mbient Temp. Range Protection Type IP, D Potted Electronics T6 Temperature Code Compensated Temperature Range Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Div, Zone 0 Div, Zone Div, Zone 0 Div, Zone Div, Zone 0 Div, Zone Div, Zone 0 Div, Zone Div, Zone 0 Div, Zone IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C IP68,Type 6P -0 C <= Ta <= 80 C -0 C <= Ta <= 60 C -5 C to 55 C IP68,Type 6P -5 C <= Ta <= 80 C -5 C <= Ta <= 60 C -5 C to 55 C Standard Pressure Ranges Overpressure urst Pressure PSI:,, 6, 5, 0, 60, 00, 50, 00,00 X or 50 psi which ever is less X or 50 psi which ever is less R: 0.07, 0.,0.,,,,6,0,,5,0 X or 50 psi( R) which ever is less X or 50 psi( R) which ever is less Note: When used in submersion applications, the maximum operating pressure, overpressure and burst pressure are limited by the cable seal grommet. Non submersible pressures up to 5000 psi ( R) can be specified. Do not subject unit to freezing water, or damage may result. For unspecified pressure ranges, errors are based on turndown of the next higher range. ffected specifications include year stability and total error band. Example: 9 PSI range is (5 PSI sensor 9 PSI range). X % =.67% total error band. 9

12 Model IDT - I.S. Submersible Level Transmitter INSTLLTION WRNING: Remove power before installing or servicing. To install the Model IDT Submersible Transmitter, connect the surface end of the cable to a power supply and controller. Suspend the transmitter into a well or tank supported only by its at tached shielded electronic cable. Insure that the opening in the well or tank cover is large enough for possible future removal of the transmitter. dditional support to the transmitter is available with an optional factory installed cable support. The optional cable support is recommended when using longer lengths of cable or when suspending the transmitter into agitated liquids. The cable support provides strain relief for the excess stress found under these circumstances. See dia gram of Model IDT Submersible Transmitter with cable support using customer supplied and installed support cable. Caution -The cable grommet and support are specially installed by factory-trained personnel to insure water-tightness. ny adjustment or removal of these items may destroy the watertight feature thus exposing the transmitter to water seepage, an electrical short and transmitter failure. ny adjustment or removal of the cable grommet or cable support voids the warranty. CUTION: Waterproof cable should not be linked or nicked. This may allow water into the electronics housing. Permanent damage will result. (Never cut or splice the waterproof cable). The surface end of the cable is used as the system's atmospheric reference. This end should not be sealed. Vent to dry temperature stable environment. Models that are supplied with cable vent tube come with a desiccant. Install per the instructions that come with the desiccant tube kit. Surge or lightning protectors are available as optional items and are strongly recommended for protection from secondary surges or lightning strikes. The units are easy to install, are maintenance-free and respond in less than one nanosecond. Install in accordance with the instructions:. Lightning protection devices should be placed as close to the instrument as possible and wired in accordance with National Electric Code in an approved watertight enclosure.. Use No. 0 WG ground wire or better from protector to earth ground.. Provide a separate ground for each run of shielded cable or metal conduit.. Keep the ground wire less than foot long and tie to a suitable ground rod or metal frame ground. Surge capabil ity is only as good as the grounding method ll ground connections must be installed Install all protectors in weather-tight enclosures. 6. Run signal lines shielded and away from power lines. 7. Wire according to for Electrical Code. 8. When used for an intrinsically safe installation, only one LM9 should be installed in the hazardous loca tion. Do not substitute protector types. 9. Models supplied with a cable that has a vent tube are supplied with a desiccant canister. When the color changes from blue to pink it should be replaced. Spare Desiccant Part numbers: K6: 8 Desiccant tube(round) kit with metal fittings, flow restrictor and polyurethane tube. K6: 8 Desiccant tube(round) only Part number K is an optional(rectangular) aluminum reusable canister generally used in junction boxes for models without cables using a vent tube. ll cables, with or without a vent tube provide an atmospheric reference. When the color changes from blue to pink, dry outside in the warm sun or in an oven per the instructions. Consult the control drawings in this manual for information on the hookup. CUTION: This, or any installation cannot protect against a direct lightning strike, or secondary strikes of sufficient magnitude. metek cannot accept liability for damage due to lightning or secondary surges. CLE SUPPORT OPTION

13 Model IDT - I.S. Pressure Transmitter HZRDOUS LOCTION PPROVL SUPPLEMENTL INSTLLTION ND OPERTING INSTRUCTIONS General: This section contains installation instructions for potentially explosive atmosphere applications. The IDT is approved for use in hazardous locations only when properly installed. Control drawings detailing installations can be found following this section of the manual. lways install to Local Codes / Requirements / Directives as Mandated by the uthority having jurisdiction. For Division, Zone 0 installations, the use of an approved barrier/entity as indicated in the Control drawings must be followed to avoid ignition capable sparks. For Division, Zone installations, conduit must be used to protect the wiring from causing ignition capable sparks. Submersible units are supplied with an extra product label. ttach label adjacent to the equipment. Device Description: The Model IDT is a Pressure Transmitter/Transducer that measures process pressure and outputs either a /0m signal or a low voltage DC signal proportional to the measured pressure. WRNING: efore installing, check the sensor model selected for compatibility to the process media in contact with the sensor and wetted parts. Misuse of this product may cause explosion and personal injury. These instructions must be thoroughly read and understood before unit is installed. See the product nameplate information for specific agency certifications applicable to your product. Explosion hazard - Substitution of components may impair suitability for use in hazardous locations. VERTISSEMENT: vant l installation, vérifier le modèle de l appareil sélectionné pour la compatibilité avec le fluide du procédé en contact avec le capteur et les parties mouillées. Utilisation abusive de ce produit peut causer une explosion et des blessures. Ces instructions doivent être soigneusement lues et comprises avant l appareil est installée. Voir l information sur la plaque signalétique du produit pour les certifications d agence spécifiques applicables. Risque d explosion - Substitution de l appareil peut nuire à l aptitude à l utilisation dans des endroits dangereux.

14 Model IDT - I.S. Pressure Transmitter HZRDOUS LOCTION PPROVL SUPPLEMENTL INSTLLTION ND OPERTING INSTRUCTIONS Special Conditions of Use. The maximum permitted operating temperature of the metek IDT series Pressure Transducers is 80 C for the conformal coated versions and 60 C for the potted versions. To avoid the effects of process temperature and other thermal effects care shall be taken to ensure that the "Electronics Temperature" does not exceed the maximum of 80 C for the conformal coated versions and 60 C for the potted versions.. The models with the non-metalic parts near the cable entry will need to be protected from exposure to UV radiation.. Model option CS connector needs to be properly sealed for IP6X protection to be valid. Conditions d utilisation spéciales. Le température maximale admissible de fonctionnement des transducteurs de pression série metek IDT est de 80 C pour les versions à revêtement conforme et 60 C pour les versions en potted. Pour éviter les effets de la température du processus et autres soins des effets thermiques doivent être prises pour se assurer que la Température de l électronique ne dépasse pas le maximum de 80 C pour les versions à revêtement conforme et 60 C pour les versions en poted.. Les modèles avec les parties non-métalliques à proximité de l entrée de câble devront être protégés contre l exposition au rayonnement UV.. L option connecteur modèle CS doit être correctement scellé pour la protection IP6X pour être valide.

15 Model IDT - I.S. Pressure Transmitter STNDRDS ND PPROVLS: FM US/Canada pprovals: Div, Zone 0 Install to Control Drawing K7505 (-0m) OR K7505 (VOLTGE) The Model IDT Pressure Transmitter is rated as Intrinsically Safe for: IS CLSS I, DIV, GROUPS,,C,D, CLSS II, GROUPS E,F,G; CLSS III IS CLSS I, DIV, ZONE 0; Ex/Ex IIC T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P FM/IS CONTROL DWG K7505 (-0m) or K7505 (VOLTGE) Div, Zone : The Model IDT Pressure Transmitter is rated as Division, Zone for: CLSS I, DIV, GROUPS,,C,D CLSS II, DIV, GROUPS E,F,G; CLSS III Zone Ex/Ex n IIC T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P TEX/IECEx Ex ia - Install to TEX/IECEx CONTROL DWG K7505 (-0m) OR K75055 (VOLTGE) The Model IDT Pressure Transmitter is rated as Intrinsically Safe for: II G Ex ia IIC Ga T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P TEX FMTEX006X IECEx FMG.00X TEX/IECEx CONTROL DWG K7505 (-0m) OR K75055 (VOLTGE) Ex n: The Model IDT Pressure Transmitter is rated as Ex n for: II G Ex n Gc T, -0 C Ta 80 C T6, -0 C Ta 60 C IP60, IP65, IP67, IP68, TYPE X, TYPE 6P FMTEX007X IECEx FMG.00X

16 PPROVL CERTIFICTES Certificate of Compliance Hazardous (Classified) Location Electrical Equipment This certificate is issued for the following equipment:.. FM/US Listing. IS/I,II,III//CDEFG/T -0 C Ta 80 C/ T6-0 C Ta 60 C; Entity NI/I//CD/, S/II/III//EFG/T -0 C Ta 80 C/T6-0 C Ta 60 C I/0 Ex ia IIC T -0 C Ta 80 C/T6-0 C Ta 60 C;Entity I/ Ex n IIC T -0 C Ta 80 C/ T6-0 C Ta 60 C IP60, IP65, IP67, IP68, Type X, Type 6P (per Option d).. Canadian Listing IS/I,II,III//CDEFG/T -0 C Ta 80 C/ T6-0 C Ta 60 C; Entity NI/I//CD/, S/II/III//EFG/T -0 C Ta 80 C/T6-0 C Ta 60 C I/0 Ex ia IIC T -0 C Ta 80 C/T6-0 C Ta 60 C; Entity I/ Ex n IIC T -0 C Ta 80 C/ T6-0 C Ta 60 C IP60, IP65, IP67, IP68, Type X, Type 6P (per Option d).. TEX Listing II G Ex ia Ga IIC T -0 C Ta 80 C/ T6-0 C Ta 60 C II G Ex n Gc IIC T -0 C Ta 80 C/ T6-0 C Ta 60 C IP60, IP65, IP67, IP68, Type X, Type 6P (per Option d).. IECEx certificate Ex ia IIC Ga T -0 C Ta 80 C/ T6-0 C Ta 60 C Ex n IIC Gc T -0 C Ta 80 C/ T6-0 C Ta 60 C IP60, IP65, IP67, IP68, Type X, Type 6P (per Option d)

17 CONTROL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. REVISION HISTORY ZONE LTR DESCRIPTION DTE PPROVED REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. MTERIL UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET 5

18 CONTROL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. REVISION HISTORY ZONE LTR DESCRIPTION DTE PPROVED REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. MTERIL UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET 6

19 CONTROL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. REVISION HISTORY ZONE LTR DESCRIPTION DTE PPROVED REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. MTERIL UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET 7

20 CONTROL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. REVISION HISTORY ZONE LTR DESCRIPTION DTE PPROVED REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. MTERIL UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET 8

21 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. ZONE LTR DESCRIPTION REVISION HISTORY DTE PPROVED IDT PRESSURE TRNSMITTER Model: Range: -8Vdc in/-0m out S/N: Date: 75 IS Class I, Div, Groups,, C, D IS Class II, Div, Groups E, F, G; Class III IS Class I, Div, Zone 0; Ex/Ex ia IIC FM/IS Control Dwg. K7505 II G Ex ia IIC Ga TEX FMTEX006X IECEx FMG.00X TEX/IECEx Control Dwg. K7505 Entity Parameters Ui=8Vdc Ii=00m Pi=0.7W Ci=5nf Li=.5uH (a) (b) (c) METEK PMT PRODUCTS FESTERVILLE P, 905 MDE IN US MTERIL REVISIONS TO THIS DRWING REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET 9

22 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. LL SHEETS OF THIS DOCUMENT RE THE SME REVISION LEVEL. REFER TO SHEET FOR REVISION HISTORY. SIZE CGE CODE DWG NO. REV 6508 SCLE WEIGHT SHEET 0

23 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. ZONE LTR DESCRIPTION REVISION HISTORY DTE PPROVED Model: Range: (d) S/N: Date: 75 IDT PRESSURE TRNSMITTER IS Class I, Div, Groups,, C, D IS Class II, Div, Groups E, F, G; Class III IS Class I, Div, Zone 0; Ex/Ex ia IIC FM/IS Control Dwg. K7505 II G Ex ia IIC Ga TEX FMTEX006X IECEx FMG.00X TEX/IECEx Control Dwg. K75055 Entity Parameters Ui=5Vdc Ii=8m Pi=0.7W Ci=97nf Li=.5uH (a) (b) (c) METEK PMT PRODUCTS FESTERVILLE P, 905 MDE IN US MTERIL REVISIONS TO THIS DRWING REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET

24 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. LL SHEETS OF THIS DOCUMENT RE THE SME REVISION LEVEL. REFER TO SHEET FOR REVISION HISTORY. SIZE CGE CODE DWG NO. REV 6508 SCLE WEIGHT SHEET

25 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. ZONE LTR DESCRIPTION REVISION HISTORY DTE PPROVED IDT PRESSURE TRNSMITTER Model: Range: -8Vdc in/-0m out S/N: Date: Class I, Div, Groups,, C, D Class II, Div, Groups E, F, G; Class III Zone Ex/Ex n IIC II G Ex n IIC Gc FMTEX007X IECEx FMG.00X METEK PMT PRODUCTS FESTERVILLE P, 905 MDE IN US (a) (b) (c) MTERIL REVISIONS TO THIS DRWING REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET

26 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. LL SHEETS OF THIS DOCUMENT RE THE SME REVISION LEVEL. REFER TO SHEET FOR REVISION HISTORY. SIZE CGE CODE DWG NO. REV 6508 SCLE WEIGHT SHEET

27 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. ZONE LTR DESCRIPTION REVISION HISTORY DTE PPROVED IDT PRESSURE TRNSMITTER Model: Range: (d) S/N: Date: Class I, Div, Groups,, C, D Class II, Div, Groups E, F, G; Class III Zone Ex/Ex n IIC II G Ex n IIC Gc FMTEX007X IECEx FMG.00X METEK PMT PRODUCTS FESTERVILLE P, 905 MDE IN US (a) (b) (c) MTERIL REVISIONS TO THIS DRWING REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN INCHES. TOLERNCES ON DEC. PL. DEC. PL. NGLES ±.0 ±.005 ± DRWN CHECKED PPROVED DTE TITLE SUPERCEDES FINISH USED ON SIZE CGE CODE DWG NO. NEXT SS`Y E-FILE SCLE 6508 WEIGHT SHEET 5

28 LEL DRWINGS THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING NOR NY INFORMTION IT CONTINS IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK INC. LIMITS OF CCEPTLE WORKMNSHIP RE DEFINED IN MS-65-. LL SHEETS OF THIS DOCUMENT RE THE SME REVISION LEVEL. REFER TO SHEET FOR REVISION HISTORY. SIZE CGE CODE DWG NO. REV 6508 SCLE WEIGHT SHEET 6

29 LEL DRWINGS For Submersible models Only. Main label is in product packaging PMT PRODUCTS, FESTERVILLE P -8 VDC IN -0 mdc OUT Ex ia-when INSTLLED PER METEK DWG K7505 OR K7505. MDE IN US FMTEX006X IECEx FMG.00X NOTES: ) THIS DRWING IS REFERENCE DRWING FOR ETCHING INTRINSICLLY SFE INFORMTION ON TRNSMITTERS OR TRNSDUCERS. ) WORD DOCUMENT K07.DOC ) LL LETTERING EXCEPT LOGOS RE 9 POINT,SINGLE SPCED,NEW TIMES ROMN. ) SCLE IS : REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. REV /0/ // /0/ DD X TO LISTING REMOVE ISSUE# CHNGE IECEx DRWN Gary ennett CHECKED PPROVED PRINTED ON: TITLE 9// U.S. GUGE DIV., PMT PRODUCTS 80 PENNSYLVNI LVD., FESTERVILLE, P 905 REFERENCE DRWING,I.S. ETCHING -0m OUTPUT, I.S. 0/7/ DD TEX # THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING, NOR NY 9// DTE RELESE DESCRIPTION PP INFORMTION IT CONTINS, IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK, INC. REVISIONS SHEET OF DWG. NO. K07 7

30 LEL DRWINGS For Submersible models Only. Main label is in product packaging. ELECTRICL INPUT/OUTPUT INPUT OUTPUT C 9-5Vdc -6Vdc D 8-5Vdc -5Vdc E 8-5Vdc Vdc F 8-5Vdc 0-5Vdc 0575 PMT PRODUCTS, FESTERVILLE P (SEE CHRT,INPUT OUTPUT) Ex ia-when INSTLLED PER METEK DWG K7505 OR K MDE IN US FMTEX006X IECEx FMG.00X NOTES: ) THIS DRWING IS REFERENCE DRWING FOR ETCHING INTRINSICLLY SFE INFORMTION ON TRNSMITTERS OR TRNSDUCERS. ) WORD DOCUMENT K076.DOC ) LL LETTERING EXCEPT LOGOS RE 9 POINT,SINGLE SPCED,NEW TIMES ROMN. ) SCLE IS : REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. REV /0/ // /0/ DD X TO LISTING REMOVE ISSUE# CHNGE IECEx # DRWN Gary ennett CHECKED PPROVED PRINTED ON: TITLE 9// U.S. GUGE DIV., PMT PRODUCTS 80 PENNSYLVNI LVD., FESTERVILLE, P 905 REFERENCE DRWING,I.S. ETCHING, VOLTGE OUTPUT 0/7/ DD TEX # THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING, NOR NY 9// DTE RELESE DESCRIPTION PP INFORMTION IT CONTINS, IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK, INC. REVISIONS SHEET OF DWG. NO. K076 8

31 LEL DRWINGS For Submersible models Only. Main label is in product packaging. PMT PRODUCTS, FESTERVILLE P -8 VDC IN -0 mdc OUT Ex n MDE IN US FMTEX007X IECEx FMG.00X NOTES: ) THIS DRWING IS REFERENCE DRWING FOR ETCHING DIVISION, ZONE 0 INFORMTION ON TRNSMITTERS OR TRNSDUCERS. ) WORD DOCUMENT K075.DOC ) LL LETTERING EXCEPT LOGOS RE 9 POINT,SINGLE SPCED,NEW TIMES ROMN. ) SCLE IS : REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. REV /0/ // /0/ 0/7/ 9// DTE DD X TO LISING REMOVE CE#,ISSUE# CHNGE IECEx # DRWN Gary ennett CHECKED PPROVED PRINTED ON: TITLE 9// U.S. GUGE DIV., PMT PRODUCTS 80 PENNSYLVNI LVD., FESTERVILLE, P 905 REFERENCE DRWING,Div/Ex n, Etching -0m OUTPUT DD TEX # THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING, NOR NY RELESE DESCRIPTION PP INFORMTION IT CONTINS, IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK, INC. REVISIONS SHEET OF DWG. NO. K075 9

32 LEL DRWINGS For Submersible models Only. Main label is in product packaging. ELECTRICL INPUT/OUTPUT INPUT OUTPUT C 9-5Vdc -6Vdc D 8-5Vdc -5Vdc E 8-5Vdc Vdc F 8-5Vdc 0-5Vdc PMT PRODUCTS, FESTERVILLE P (SEE CHRT,INPUT OUTPUT) Ex n MDE IN US FMTEX007X IECEx FMG.00X NOTES: ) THIS DRWING IS REFERENCE DRWING FOR ETCHING DIVISION, ZONE 0 INFORMTION ON TRNSMITTERS OR TRNSDUCERS. ) WORD DOCUMENT K077.DOC ) LL LETTERING EXCEPT LOGOS RE 9 POINT,SINGLE SPCED,NEW TIMES ROMN. ) SCLE IS : REV /0/ // /0/ 0/7/ 9// DTE REVISIONS TO THIS DOCUMENT REQUIRE GENCY NOTIFICTION. REFER TO DOCUMENT EN0-7. DD X TO LISTING REMOVE CE#,ISSUE# CHNGE IECEx # DRWN Gary ennett CHECKED PPROVED PRINTED ON: TITLE 9// U.S. GUGE DIV., PMT PRODUCTS 80 PENNSYLVNI LVD., FESTERVILLE, P 905 REFERENCE DRWING,DIV/Exn,ETCHING VOLTGE OUTPUT DD TEX # THIS DRWING IS THE PROPERTY OF METEK INC. LL RIGHTS RE RESERVED ND NEITHER THIS DRWING, NOR NY RELESE DESCRIPTION PP INFORMTION IT CONTINS, IS TO E COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM METEK, INC. REVISIONS SHEET OF DWG. NO. K077 0

33 LEL DRWINGS For Submersible models Only. Main label is in product packaging.

34 On-line order fax: or mctpmt.sales@ametek.com Sales/Technical Support: Pennsylvania lvd Feasterville P 905 U.S.. METEK, Inc. ll rights reserved. Printed in the U.S.. IDT User Manual, K79650 Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.