SURVEYING INSTRUMENTS SOKKIA 3-D STATION NET2100 CONTROL TERMINAL SDR4E

Transcription

1 SURVEYING INSTRUMENTS SOKKIA 3-D STATION NET2100 CONTROL TERMINAL SDR4E

2 NET2100: A high-precision, multi-function 3-D station ±(0.8 +1ppm x D*1) mm precision and 0.1 mm minimum resolution in distance measurement; 2" precision and 0.5 minimum resolution in angle measurement *1 D = distance, unit:mm Unique optical system offering the highest measuring precision in its class Standard deviation within 0.9mm at 100m The NET2100 features SOKKIA's unique optical system created to achieve supreme precision in industrial measurements. Light is emitted from the center of an objective lens and received at the periphery. Using this system, light can be received uniformly from all areas of the target, thereby enabling high-precision measurement regardless of the installation angle or direction of target installation. Internal memory offering large measurement data storage capacity Permits high-speed data processing and secure storage The NET2100 has a large internal memory(448kb) capable of holding a full 3,000 data points.multiple Job Files allow a maximum of twenty-four different files for different jobs. Point numbers can be input alphanumerically. Forty feature codes (max. 16 characters each)can be stored in the memory for easy recall for recording. Measurement and recording are performed simultaneously with a single touch of the "AUTO" key. Large display screen and customizable keyboard The NET2100 features a large (20 characters x 8 lines) nonreflective glass display with backlight. It offers a broad field of view and extensive operating temperature range. Control panels are provided on both the front and rear. Any keyboard layout can be configured, and powerful softkeys and "edit-keys" along with the 10keys greatly facilitate data input.

3 Automatic dual-axis level compensator and collimation for outstanding measurement precision The automatic dual-axis level compensator detects any inclination of the NET2100 from proper perpendicularity in any direction and automatically performs compensation of the horizontal, vertical and sighting axes as necessary. The result is outstanding precision in angle measurement at all times. It is also possible to confirm the inclination of the unit graphically or numerically, to achieve accurate collimation with speed. Ni-MH battery A nickel-hydrogen battery serves as the power supply. Using a single battery weighing a mere 250g, it is possible to perform measurements for about two hours. The battery can be recharged in only 70 minutes, using the high-speed battery charger provided as standard equipment. As two batteries are provided, it is actually possible to measure for up to four hours. The remaining battery charge is constantly displayed, in four stages. An auto power cut-off function cuts the power supply automatically after 30 minutes idle time. A powerful resume function is also provided which returns the unit to the operating mode before the unit was last turned off. Abundant power supply systems are also available for longer usage needs, including external batteries and an AC/DC converter. Light weight, compact size Main unit 6.1 kg, Carrying case 3.9kg For optimum mobility when moving and installing the unit, the NET2100 and its carrying case have been designed for lightweight convenience and compact size. The main unit, with battery installed, weighs only 6.1 kg. The carrying case weighs a mere 3.9kg. Accurate collimation supported by twospeed adjustments (fine/coarse) The NET2100 is provided with a variety of innovative features to ensure accurate collimation, which is indispensable to high-precision measurement. The telescope's horizontal fixed/fine adjustment knobs and focusing knobs, which perform collimation of the target object, are all rubber-coated to prevent slippage. All fine adjustment knobs can be operated at either of two speeds: fine or coarse. The result is accurate collimation with outstanding speed. Standard programs built in for storage of measurement data using main unit only In addition to standard features for distance and angle measurement, the NET2100 comes with built-in basic programs for the following measurement modes: 3-D Coordinate Measurement, Setting-out, Resection, Azimuth Angle Setting, Offset Measurement, Missing Line Measurement, Remote Elevation Measurement, Angle Repetition.

4 (optional) MONO MOBILE 3-D STATION Enables reproduction of design data, for comparison with measurement data on site The SDR4E is a large-capacity, versatile control terminal that permits instant, on-site comparison of design data with actual measurement data. It not only offers programs for standard measurement applications, but is available with programs for measurement of design data and position measurement. With both methods, by inputting data on the measuring points in advance, it is possible to reproduce design data coordinate systems at the site. Measurement data can then be stored while comparing the actual measurement data against the design data at each measuring point. Design data comparison, for easy shape measurement The coordinate system for design data measurement is set automatically by measuring three to six random points for which design data is provided. By measuring the points on the measured object and setting the coordinate system, the X, Y and Z axes are made to coincide with the coordinate system of the design data. Even in cases where the measured object is installed at a tilt or rotated 180, measurement can be continued by comparing actual measurement data with the design data. This feature is especially useful for measuring the shape of large parts used in structures such as ships and bridges. Position measurement, for easy positioning and displacement measurement With the position measurement program, the coordinate system is set automatically by measuring two to six random points for which design coordinate data is provided, such as control points used for surveying. The XY plane is always determined to be horizontal, and the Z-axis to coincide with the plumb line. Part positioning and installation can be performed quickly by comparing the measured data against the design data. For tunnel displacement measurement, the initial data can be converted for use in place of design data, for reference each time measurements are taken. Three coordinate-system setting methods, for increased efficiency The NET2100 offers outstanding mobility. Simply place the object to be measured in any convenient position for measurement, and take measurements of two or three random points. The NET2100 sets the coordinate system automatically to begin measurement. The standard measurement program of the SDR4E Control 1. The first measuring point is used as the datum point (0,0,0); the second measuring point, as a point in the XZ plane (X1,0,Z1). The coordinate system is then set using these two points in such a way that the Z- axis lies in the perpendicular direction. Coordinate System Setting Methods 2. The first measuring point is used as the datum point (0,0,0); the second measuring point, as a part of the X-axis (X2,0,0); the third point, as a point in the XY plane (X3,Y1,0). The coordinate system is then set by using these three points in such a way that the Z-axis falls directly perpendicular to the XY plane. Terminal offers three standard methods for setting the coordinate system, to facilitate post-measurement analysis. By offering free selection depending on the conditions of object measurement (location, etc.), post-measurement coordinate conversion can be performed quickly. 3. The first measuring point is used as the datum point (0,0,0); the second measuring point, as a point on the X-axis (X4,0,0); the third measuring point, as a point in the XZ plane (X5,0,Z2). The coordinate system is then set by using these three points in such a way that the Y-axis falls directly perpendicular to the XZ plane. Other Convenient Functions Connection of coordinate systems (useful for measuring large structures, etc. using a single coordinate system) Front/rear measurement modes On-site positioning through use of design data Versatile data conversion Outstanding on-site analysis and confirmation

5 Diverse Range of Targets and Professional Programs for Enhanced Measurement Efficiency An impressive lineup of targets to meet a variety of measuring needs The NET2100 is used with Sokkia's specially developed reflective targets set at each measuring point. They feature adhesive tape backing for direct fixing to the measuring object. A full lineup of sizes and shapes is available, from 5 x 5mm to 90 x 90mm, to match the size and shape of the object being measured or the measurement distance. SOKKIA offers targets for all locations and almost any object. Besides sheet type targets, rotary targets are also available for convenient use with datum points or coordinate system connecting points. A two-point target is available for measuring hidden points that cannot be directly collimated. MONO MOBILE 3-D STATION

6 NET2100 Specifications Telescope Length 175mm Objective aperture 45mm(1.8 in.) (EDM: 49mm(1.9 in.)) Magnification 30x Resolving power 3" Field of view 1 30' (26m/1000m) Minimum focus 2m(6.6 ft.) Reticle illumination Built-in (bright/dim selectable) Fine/coarse 2-speed focus selection Standard Angle measurement Type H&V Photoelectric incremental rotary encoder scanning. Both circles adopt diametrical detection and are provided with absolute 0 index point. Minimum resolution(selectable) H&V 0.5"/0.1mgon/0.002mil 1 /0.2mgon/0.005mil Accuracy H&V 2"(0.6mgon) (standard deviation according to DIN 18723) Automatic dual-axis level compensator Dual-axis liquid electro-optical tilt sensor, ON/OFF selectable, Range: ±3', Minimum resolution according to selected minimum resolution of angle measurement, Out-of range warning message Display mode H Clockwise/counterclockwise selectable \/ Zenith 0 /horizontal 0 selectable Distance measurement Light source Modulated Near-infrared light-emitting diode Measuring range 2m(6.6ft) to 100m(328ft) (RS90 reflective sheets target) 50m(164ft) to 1000m(3,280ft) (using CPS12 high-precision reflective prism) Minimum resolution Fine measurement m/0.001m(0.001ft/0.01ft) selectable High-speed measurement 0.001m(0.01ft) Tracking 0.01m(0.1ft) Accuracy ±( ppm x D)mm*1 (using RS or RT series reflective targets) ±( ppm x D)mm*2 (using CPS12 high-precision reflective prism) Measuring time: Fine measurement Every 4.7s (initial meas. 6.5s) High-speed measurement Every 3.3s (initial meas. 5.0s) Display range to m( ft) Atmospheric correction Selectable: (1)Direct key-in of temperature and pressure (hpa/mmhg) (2)Direct key-in of temperature, pressure (hpa/mmhg) and humidity (3)Direct key-in of ppm (4)No correction General Display Alphanumerics, graphics Dot matrix LCD on each face 20 chars. x 6 lines, 120 x 64 dots, Non-reflective glass, backlight Keyboard 26 Latex keys on each face (numeric, cursor, edit, power, softkey function, illumination) Sensitivity of levels Plate level 20"/2mm Circular level 10'/2mm Optical plummet Image: erect. Magnification: 7x. Minimum focus: 0.5m Standing (vertical) axis Independent double-axis Battery level display 4-stage power codes, with message display Automatic power cut-off 30 minutes after last operation, ON/OFF selectable Data storage Internal memory capacity 448KB (Approx 3,000 points) Interface Asynchronous serial, RS-232C compatible, Centronics compatible Operating temperature -10 C to +40 C (14 F to 104 F) Water resistance IPX2 (Based on IEC 529/1989) Size with handle and BDC35 battery 177(W) x 165(D) x 371(H) mm (7.0(H) x6.5(d) x 14.6(H) in.) Instrument height (horizontal axis height) 236mm (9.3 in.) from tribrach bottom, 193mm (7.6 in.) from tribrach dish Weight 6.1kg (13.4lb.) (including handle and battery) Power supplies Voltage 6V DC BDC35 internal battery Rechargeable Ni-MH battery, 2 Pcs. supplied Continuous use at 25 C (77 F) 2 hrs (approx) Charging time at 25 C (77 F) 70 min (approx) BDC12 external battery (optional) BDC12 external battery (optional) Continuous use at 25 C (77 F) 8 hrs (approx) Target Specifications Reflective sheets (RS series) Thickness 0.4mm Prism constant 0mm Light incident angle ±45 Target size (measuring range) RS00: 200 x 200mm (no pattern) RS10N: 10 x 10mm (2 to 20m) RS20N: 20 x 20mm (2 to 50m) RS30N: 30 x 30mm (2 to 70m) RS50N: 50 x 50mm (2 to 80m) RS90N: 90 x 90mm (2 to100m) Rotary target RT50M Target size 50 x 50mm Prism constant 0mm Measuring range 2m to 60m (260 ft.) Rotating direction 360 in H&V Base Provided with magnet Weight 220g (7.8oz) Reflective targets RC50/RC100 Target size RC50 70 x 73mm (including frame) RC x 127mm (including frame) Thickness 7.9mm Prism constant 0mm Measuring range RC50 50m to 120m (164 to 393 ft.) RC m to 200m (328 to 656 ft.) High-precision target RT1A Instrument height 236mm(193mm from tribrach dish) Optical plummet Magnification 7 Minimum focus 0.5m or less Sensitivity of (tubular) level 40"/2mm Prism constant 0mm Target size 90 x 90mm Measuring range 2m to 100m (320 ft.) Measuring range: The values indicated are the references when the reflective target faces directly in front of the instrument, creating a right angle with the line of sight. Measuring range varies according to the angle between the NET2100 and the target. Standard Configuration NET D station 1 BDC35 internal batteries 2 CDC39 quick charger 1 CP7 tubular compass 1 Lens cap 1 Lens hood 1 Vinyl cover 1 Tool pouch 1 Screwdriver 1 Lens brush 1 Adjustment pin 2 Cleaning cloth 1 Operator's manual 1 Two way communication Functions Command Explanations 1 Carrying straps 1 SC180 carrying case 1 *1 When target is placed within the specified measuring range, with an installation angle of ±45 *2 When target is placed within the specified measuring range, with an installation angle of ±15 (Installation angle refers to angle between target s reflective surface and the NET2100 s distance measurement light) Sokkia is a sponsor of the International Federation of Surveyors SOKKIA CO.,LTD. ISO9001 Certified (JQA-0557) INTERNATIONAL DEPT. PHONE FAX , ASAHICHO-CHOME, MACHIDA, TOKYO, JAPAN