LUMI P SPEC

Transcription

1 Doc. No: LUMI P SPEC 6PIN-SMD LED FULL COLOR LED ( Application : illumination ) Preliminary Specification Customer Approval Model Issued Date LMTP553RGB-X Checked By Approved By Description SMD Type LED Written By Checked By Approved by Contact Point Tel: Fax: Homepage:

2 Lumimicro TOP VIEW LED P/N

3 Features [1] Built-in 3 chip Super-luminosity Chip LED [2] Super-luminosity chip LED [3] Wide viewing angle [4] External dimensions: 5.0 x 5.0 x 1.6t mm [5] Lead frame package with individual 6 pin Outline Dimensions BLUE GREEN RED Unit: mm, Tolerance: ±

4 Absolute Maximum Rating Parameter Color Symbol Rating Value Unit Forward DC Current RED GREEN IF-1 30 m A BLUE RED 70 Power Dissipation GREEN PD 100 mw BLUE 100 RED 100 Forward Pulse Current *1 GREEN IPF m A BLUE 100 Reverse Voltage Full Color VR-1 5 V ESD Voltage Full Color ESD-1 HBM 3,000 V Storage Temperature Full Color TST -40 to C Operating Temperature Full Color TOT -30 to + 85 C Soldering Temperature Full Color TSD 240C for 10 Seconds C *1 : Forward Pulse Current : Pulse Width < 10msec / Duty Ratio < 1/10 Electrical & Optical Spec [Condition : 20mA / Chip Ta = 25 C ] Parameter Symbol Color Rating Value Min Typ Max Unit RED 1.9 _ 2.4 Forward Voltage VF GREEN 2.8 _ 3.6 V BLUE 2.8 _ 3.6 RED 620 _ 630 Dominant Wavelength DW GREEN 525 _ 535 nm BLUE 455 _ 465 RED _ Luminous Intensity IV GREEN 900 1,100 _ mcd BLUE _ Measurement Tolerance: VF ± 0.05V / DW ± 2nm / IV ± 10%

5 Electrical & Optical Characteristics [ Condition : 20mA / Chip Ta = 25 C ] Parameter Symbol Color Rank Rating Value Min Typ Max Unit RED RW1 620 _ 625 RW2 625 _ 630 Dominant Wavelength DW GREEN GW1 525 _ 530 GW2 530 _ 535 nm BLUE BW1 455 _ 460 BW2 460 _ 465 RED RL1 400 _ 600 RL2 600 Luminous Intensity IV GL1 900 _ 1,200 mcd GREEN GL2 1,200 BLUE _ 150 Measurement Tolerance: DW ± 2nm / IV ± 10%

6 Electrical & Optical Characteristics 60.0 Red Green Blue I-V 1.5 IV-I Graph Red Green Blue C u rr ent[ m A ] Luminous Intensity[cd] V oltage[v ] Current[mA] Radiant Intensity[mW /sr] RI-I Graph Red Green Blue Current[mA] All owabl e Power Di s s i p ati o n(mw) Ambient Temperature vs.allowable Power Dissipation Blue&Green Ambien t Te mpe rat ure ( ) Red Ambient Temperature vs.allowable Power Dissipation 2color mixing 1.6E-04 Spectrum Graph Al l o w ab l e P o w e r D i s s i p ati o n(m W ) E E E E E A mb ie n t T e mp e ra t u re ( ) 4.0E E E nm

7 Reliability Results ITEMS CONDITION NOTE Fail/Sample 1 2 RESISTANCE TO SOLDERING HEAT TSID=260, 10sec (REFLOW SOLDERING) (PRE TREATMENT 30, 70%, 168hr) SOLDERBILITY TSID=215 ±5, 3sec (REFLOW SOLDERING) (LEAD SOLDER) 2TIMES 0/50 1TIME OVER 95% 0/50 3 THERMAL SHOCK -40 ~ 100, 15min AT EACH TEMP. 20CYCLES 0/50 4 MOISTURE RESISTANCE CYCLE 25 ~ 65 ~ -10, 90%RH 24hr/ 1cycle 20CYCLES 0/50 5 HIGH TEMPERATURE STORAGE Ta = 100 1,000HRS 0/50 6 TEMPERATURE HUMIDITY STORAGE Ta = 60, RH = 90% 1,000HRS 0/50 7 LOW TEMPERATURE STORAGE Ta = -40 1,000HRS 0/50 8 LIFE TIME 1 ROOM TEMP. 1,000HRS 0/50 9 LIFE TIME 2 60, 90%RH 1,000HRS 0/50 10 ON/OFF TEST IF = 20mA, Pulse Width 2sec, Duty Ratio 1/2 100,000CYCLES 0/50 Failure Criteria ITEM SYMBOL MIN Failure Criteria MAX Forward Voltage VF - U.S.L*) 1.2 C.I.E. x, y x, y L.S.L*) 0.8 U.S.L*) 1.2 Luminous Intensity IV L.S.L*) U.S.L*) ; Upper Standard Level L.S.L*) ; Lower Standard Level

8 Recommended Pad Pattern Taping pocket Dimension

9 Reel Dimensions One Reel Unit Tolerance Packing Spec Max 750EA mm 0.1 LUMIMICRO FLASH SIDE VIEW LED - Aluminum Bag Reel in a Bag Silica in a Bag Goods QNT in a Bag Aluminum Bag 1 Reel 1 Silica, 1 Indicator Max : 750ea - Box Spec. Dimensions(Width/Thickness) Unit : mm Reels in Box Goods in QNT in Box Box 275/ 285/ Max : 7,500ea

10 Label Spec Precautions For Use This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA should be used. When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3months or more after being shipped from LUMIMICRO, sealed container with a nitrogen atmosphere should be used for storage. The LEDs must be dip soldered within seven days after opening the moisture-proof packing. Repack unused Products with anti-moisture packing, fold to close any opening and then store in dry place. The appearance and specifications of the product may be modified for improvement without notice. These LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If Over voltage which exceeds the absolute maximum rating is applied to LEDs, it will cause damage in LEDs and result in destruction. Damaged LEDs will show some unusual characteristics such as remarkably increased leak current, turn-on voltage becomes lower and the LEDs get unlighted at low current

11 Soldering Condition 1. Reflow Conditions ( With Pb ) Preliminary heating to be at 150 C max. for 2 minutes max. Soldering heat to be at 240 C max. for 10 seconds max. Max 240 C Temp. ( C) Max 120 ~ 150 C 10sec.Max 120sec.Max Time Recommended Solder Paste : Alloy- 63Sn/37Pb Model: OL107B, 2. Pb free Reflow Conditions Preliminary heating to be at 170 C max. for 2 minutes max. Soldering heat to be at 260 C max. for 10 seconds max. Max 260 C Temp. ( C) Max 150 ~ 170 C 10sec.Max 90 ~120sec.Max Time Recommended Pb free Paste Alloy: 96.5Sn/3Ag/0.5Cu. - Model: OL For Manual Soldering Not more than C, under soldering iron

12 Test Certification