CI/SfB (57.7) 1st Edition

Transcription

1 CI/SfB (7.7) 1st Edition

2 edemand Controllers Electronic voltage controller edemand Controllerss Demand ventilation control for A/C speed controllable Fans Quick start-up by preprogrammed IP4 Rated Total motor protection using thermistor connection LCD multi function display Menu language English, German, French, Italian 2 x analogue input for sensors (0-10V separate power supply required, 0-20mA) CO 2 Control Temperature Control Constant Pressure Control Manual remote speed adjuster (0-20 ma) Min/Max speed limitation - Volume range set point adjustment 2 x Programmable relay output - Fault Condition, master slave Programmable 2x Digital inputs On/Off, external fault, Manual speed control RS48 Modbus Interface Master/Slave capability via 0-10V output Equipment/Function Mains switch with by-pass function Pin protection, to save user settings Quick start up by pre-programmed Max environmental conditions 40 Deg C, 8% Humidity no condensation Readout events memory (checking Fault log) Technical Line voltage 1~ 20V (-1% / + 10%) 0/60 Hz Line Voltage ~208V - 41V (-10%/+6%), 0/60 Hz Part No Voltage 1 Phase 1 Phase Phase Phase Phase Rated current / A Max. line fuse / A Max. heat dissip. /W Weight / kg Interference emissions EN (unshielded motor cable) Interference immunity EN Phase 6 Amp Phase 10 Amp Ø 1.Ø Phase /10 /1 Amp 2 T:

3 edemand Controllers Frequency Inverter 1~ to ~ edemand Controllerss Demand ventilation control for A/C speed controllable Fans Quick start-up by preprogrammed IP4 Rated Total motor protection using thermistor connection Equipment/Function Pin protection, to save user settings Quick start up by pre-programmed Integrated SINEFILTER Max environmental conditions 40 Deg C, 8% Humidity no condensation Ø LCD multi function display Menu language English, German, French, Italian 2 x analogue input for sensors (0-10V separate power supply required, 0-20mA) CO 2 Control Temperature Control Constant Pressure Control Manual remote speed adjuster (0-20 ma) Min/Max speed limitation - Volume range set point adjustment Readout events memory (checking Fault log) Speed control of fans without additional (electromagnetic) motor noise Parallel operation of fans, no risk of motor damage (screened motor cables are not required) Active power factor adjustment for sinusoidal input current Integrated process controller (PID free programmable) 1 Phase 6 Amp 2 x Programmable relay output - Fault Condition, master slave Programmable 2x Digital inputs On/Off, external fault, Manual speed control RS48 Modbus Interface Master/Slave capability via 0-10V output Technical Line voltage 1~ V (-10 % / +10 %), 0/60 Hz Output voltage ~20V (max. 20V) for ~ motors in connection Part No Voltage 1 Phase Rated current / A 6 Max. line fuse / A 10 Max. heat dissip. /W 20 Weight / kg 6.6 Max output Frequency 100 Hz Clock frequency 16 Hz Interference emissions EN (unshielded motor cable) Interference immunity EN W:

4 edemand Controllers Frequency Inverter ~ edemand Controllerss Demand ventilation control for A/C speed controllable Fans Quick start-up by preprogrammed IP4 Rated Total motor protection using thermistor connection Equipment/Function Pin protection, to save user settings Quick start up by pre-programmed Integrated SINEFILTER Max environmental conditions 40 Deg C, 8% Humidity no condensation LCD multi function display Menu language English, German, French, Italian 2 x analogue input for sensors (0-10V separate power supply required, 0-20mA) CO 2 Control Temperature Control Constant Pressure Control Manual remote speed adjuster (0-20 ma) Min/Max speed limitation - Volume range set point adjustment 2 x Programmable relay output - Fault Condition, master slave Readout events memory (checking Fault log) Speed control of fans without additional (electromagnetic) motor noise Integrated SINEFILTER between phase to phase & phase to ground Parallel operation of fans, no risk of motor damage (screened motor cables are not required) Active power factor adjustment for sinusoidal input current Integrated process controller (PID free programmable) 2. Amps /8/14/18 Amps.Ø 6.Ø Programmable 2x Digital inputs On/Off, external fault, Manual speed control RS48 Modbus Interface Technical Line voltage ~ V (-1 % / +10 %), 0/60 Hz Master/Slave capability via 0-10V output Part No Rated current / A Max. line fuse / A Max. heat dissip. /W Weight / kg Max output Frequency 100 Hz Clock frequency 16 Hz Interference emissions EN (unshielded motor cable) Interference immunity EN T:

5 edemand Controllers Frequency Inverter 1~ edemand Controllerss Demand ventilation control for A/C speed controllable Fans Quick start-up by preprogrammed IP4 Rated Total motor protection using thermistor connection LCD multi function display Menu language English, German, French, Italian 2 x analogue input for sensors (0-10V separate power supply required, 0-20mA) CO 2 Control Temperature Control Constant Pressure Control Manual remote speed adjuster (0-20 ma) Min/Max speed limitation - Volume range set point adjustment 2 x Programmable relay output - Fault Condition, master slave Programmable 2x Digital inputs On/Off, external fault, Manual speed control RS48 Modbus Interface Master/Slave capability via 0-10V output Equipment/Function Pin protection, to save user settings Quick start up by pre-programmed Integrated SINEFILTER Max environmental conditions Deg C, 8% Humidity no condensation Readout events memory (checking Fault log) Speed control of fans without additional (electromagnetic) motor noise Parallel operation of fans, no risk of motor damage (screened motor cables are not required) Active power factor adjustment for sinusoidal input current Integrated process controller (PID free programmable Technical Line voltage 1~ V (-10 % / +10 %), 0/60 Hz Part No Voltage 1 Phase 1 Phase 1 Phase Rated current / A rated Current/ A Amps /10 Amps 240.Ø Ø 19. Max. line fuse / A Max. heat dissip. /W Weight / kg Max output Frequency 100 Hz Clock frequency 16 Hz Interference emissions EN (unshielded motor cable) Interference immunity EN W:

6 edemand Auto Changeover Panels IP4 Enclosure edemand compatible Single & Three Phase models Adjustable Duty/Share Timer Automatic Changeover (Fan Fail) Fan Failure Alarm contacts Offering Demand Ventilation control for the wide range of standard AC speed controllable Twin fans, these new changeover panels have been designed to compliment the new range of edemand Controllers and are fully compatible. Speed control input is suitable for use with the following edemand Controller ranges Single & Three Phase electronic speed controllers. Single & Three Phase inverters. Single to Three Phase inverter. Models Stock Ref Three Phase 10 Amp Single Phase 10 Amp Single Phase 20 Amp Connection Diagrams Single Phase Inverters for , & Auto % L1 L1 N N U1 U1 U2 U K1 K2 PE Line L1 N 1 ~ V 0/60 Hz ~ Motor with internal thermostats 2 Contact rating max. 2 A / 20 V AC 8 Switch or Jumper 7 Addressing C C Normal V V V ma ma E1.1 E2.1 D- E1 E2 E1.2 E2.2 C D+ GND ma 24 V TB / TP Digital Analog24V DC Analog Analog Digital In In 1 Out 1 Out In 1 In 2 In GND TK/PTC D1 D1 A GND24 V24 VE1 GNDE2 GNDD2 D2 K1 K2 L1 L2 L N U V W PE U1 U2 TB TB M 1~ 6 Contact rating max. AC 20 V 2 A 1 Line 1 ~ V, 0/60 Hz 2 1 ~ Motor with internal thermostats Output V (Imax = 6 ma) 4 1: V, ma, ma, TF.. (KTY81-210), PT1000 TB TB D- D+ GND Digital In 1 Digital In 2 Analog Analog Analog Out 1 In 1 Analog Temp Out 2 In 2 1/2 24V D1 D2 A1 A2 E1 E2 T1 24V D1 D2 GND GND GND GND T2 GND V ma ma Output V V ma (Imax = 6 ma) ma 4 TF.. TF.. Three Phase Inverters for , 44417, , & Addressing 7 Normal KTY PT : V, ma, ma, TF.. (KTY81-210), PT Contact rating max. 2A / 20 V AC 7 Addressing, normal lock closed 24 V Data Data GND+ - RS mm² / 2x PE L1 L2 L N 1 Line ~ V 0/60 Hz Only in special version suitable for IT network! U V WPE M ~ Y/ TB TB ~ Motor with internal thermostats 1 Line ~ V, 0/60 Hz 2 Only in special version suitable for IT network! ~ Motor with internal thermostats 4 Output V (I max = 10 ma) 1: V, ma, ma, TF.. (KTY) 6 2: V, ma, ma, TF.. (KTY) 7 Addressing, normal lock closed 8 Switch or jumper depending on version Output V V (Imax= 10 ma) ma ma 4 TF.. (KTY) V ma ma TF.. (KTY) 0-10 V TF.. MBG..-I DSG 0-10 V MAL 0-10 V A E1 GND 0-10 V E1 GND 24V E1 GND 24V E1 GND 24V E1 GND TF.. 10 k 1 BN GN BN YE WH 1 2 MBG.. DSG.. MAL1/10 (4-20 ma) (0-10 V) (0-10 V) 24 V Data Data GND+ - RS-48 GNDD+ D- Terminal AXG-1A(E) 6 T:

7 Accessories & Controls Connection Diagrams Single Phase Electronic for & F1=M10 A /...10 F1=FF20 A Auto % C ma V PE PE N N L1 6 E2 E1 Contact rating max. AC 20 V A Digital In 1 L1 U1 U1 U2 U V D (TB) (TB) D (E) D1 K1 K2 Analog Out 1 D1 (GND) A1GND Digital In 2 Analog In 2 Analog In 1 A (D2) GND (D2) E2GNDE1GNDGND 24V GND D+D- PE N L1 Line depending on version 1 ~ 20 V 0/60 Hz or 1 ~ 11 V 0/60 Hz 1 PE U1 U2TB TB M 1~ 1 ~ Motor with internal thermostats 2 1 Line voltage depending on version: 1 ~ 20 V, 0/60 Hz or 1 ~ 11 V, 0/60 Hz 2 1 ~ Motor with internal thermostats Output V (Imax = 10mA) 4 2: V, ma, ma, TF.. (KTY) 1: V, ma, ma, TF..(KTY) 6 Contact rating max. AC 20 V A 0-10 V TF.. MBG..-I A E1 GND 0-10 V E1 GND 24VE1 TF.. 10 k 1 BN GN MBG.. (4-20 ma) V ma ma TF..(KTY) Output V V (Imax = 10 ma) ma ma TF..(KTY) DSG 0-10 V MAL 0-10 V GND 24V E1 GND 24VE1 GND BN YE WH DSG.. (0-10 V) 1 2 MAL1/10 (0-10 V) 24 V Data Data GND + - RS-48 Three Phase Electronic for , & W: 7

8 By Appointment to H.M. The Queen Suppliers of Unit Ventilation Equipment Vent-Axia, Crawley, West Sussex VENT-AXIA CONTACT NUMBERS Free technical, installation and sales advice is available Sales Centre: Domestic & Commercial Sales Tel: Sales Fax: Tech Support Tel: Tech Support Fax: Industrial Sales Tel: Sales Fax: Tech Support Tel: Tech Support Fax: Web: Supply & Service All sales made by Vent-Axia Limited are made only upon the terms of the Company s Conditions of Sale, a copy of which may be obtained on request. As part of the policy of continuous product improvement Vent-Axia reserves the right to alter specifications without notice. 400/1110