g-tek Visible Light Sensor ( 1.25uA per lux) GBD-A1C G-Tek Scientific Ltd. Description

Transcription

1 Description P8-5 The is a low cost photo transistor, with a current output which is directly proportional to the light level. It is sensitive to visible and near infrared radiation.. The output current can be converted to a voltage by connecting it in series with a resistor. The dynamic range is determined by the external resistor and power supply (K and 5V gives a range of to over, but it can be over with a K resistor). The internal dark current cancellation enables high accuracy over the full temperature range, even at low light levels. Features compliant and complete CdS replaceable High IR rejection Current output highly linear V.S. light level Near human eye photopic response Integrated high gain photo-current amplifier Dark-current cancellation Temperature stable compliant Applications Dawn/dusk sensing Surveillance Camera Display backlighting in LCD monitors/ mobile phones/laptops Street light Pb Product Summary Usable Light Range Typ IPSS() Ф(deg) λ.5(nm) ~ 5 (Rss=K) to Ordering Information Packaging Each Bulk MOQ Package Form Bulk PCS PCS 5mm ( T 4 ) Absolute Maximum Ratings(Ta=5 C) Parameter Symbol Rating Unit Supply lnput Voltage(Vdd) -. to V Operating Temperature To -4 to +85 C Storage Temperature Tstg -4 to + C

2 Test Circuit (+ve Terminal) Light Source White LED Light Sensor IC Oscilloscope OSC Vss (-ve Teminal) Rss Environment: <. Rss=k ohm Rss is recommended to use high stable resistor C8- Electrical Specification The following parameters apply over the operating temperature -4 to +85,and with Rss=K Ohms,Vdd=5V,as per C8- Parameter Symbol Min Typ Max Units Test Conditions lnfra Red Response 5 % of peak 9 nm Operational voltage Vdd-Vss..6 v lss = 5.5 v lss = Light Current (+/-5%) lss < na Dark Current l(dark) 5 na Gain linearity - %, Ta = 5, Ta = 85 Peak Spectral Response Sensitive Area 5.54 nm m m

3 Charts Relative Response(%) Response vs Wavelength Wavelength(nm) Photopic Leakage(nA) Dark Leakage vs Temperature Temperature( ) G8- G8- Vss (mv) Vss vs Temperature, Rss = M Ohms Temperature( ) G8- Vss (v) Vss vs - Typical values, Rss = K (~7) Rss = 5K (~9) Rss = K (~6) G8-45 Iss vs - Typical values, Vss vs - Typical values, Iss () Vss (v) Rss = K (~7) G G8-

4 Ø7.8±. g-tek Dimensions VSS CHIP VDD..5 D8- Packaging and Labeling Plan.±.5 Ø.±.5 Ø6.±.5 G-TEK Scientific Ltd 9.±.5.±.5 P/N: QTY: PCS 7 4 LOT: XXXXX Q.C PASSED G-TEK SCIENTIFIC.LTD * G-TEK Scientific Ltd P/N: 7 4 QTY: PCS 69 LOT: xxxxxxq.c PASSED * 4

5 Wave Solder Profile T( ) 5 MAX LEAD FREE SOLDERING TEMP, 6-5 SEC MAX LEADED SOLDERING TEMP, - 5 SEC 5 PREHEAT -5 sec ( MAX) t(sec.) G8-7 Recommended Lead Free Wave Soldering Profile Preheat Temperature: Max Preheat Time: ~5 Seconds Peak Temperature: 6 Max. Solder Time Above 7 : 5 Seconds Max. Note: Turn Off top heater at preheat to prevent the lamp body directly exposed to the heat source. Disclaimer All PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Material Category Policy We declare that this part is ROHS /95/EC compliant, based on our understanding of the directive. This part is manufactured where the banned substances would not be used during processing. G-Tek Scientific Ltd will perform periodic screening based on the determined risks, and are developing procedures as part of our management system to ensure compliance. 5