CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z

Transcription

1 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board/ACLASS 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that Kistler Instrument Corporation 75 John Glenn Drive Amherst, NY has been assessed by ACLASS and meets the requirements of international standard ISO/IEC 17025:2005 and national standard ANSI/NCSL Z while demonstrating technical competence in the field(s) of CALIBRATION Refer to the accompanying Scope(s) of Accreditation for information regarding the types of calibrations to which this accreditation applies. AC Certificate Number ACLASS Approval Certificate Valid: 05/01/ /07/2016 Version No. 004 Issued: 05/01/ a This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

2 ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z Kistler Instrument Corporation 75 John Glenn Drive Amherst, NY Fred Bartz Phone: And satellite site located at Hudson Drive Novi, MI Bruce Noland Phone: CALIBRATION Valid to: July 7, 2016 Certificate Number: AC-1117 I. Electromagnetic - DC/Low Frequency PARAMETER / Vibration 3 (0.5 to 20) 1.01 % Honeywell QA Vibration, A, B, F, G 3 (5 to 2 000) 1.24 % Vibration, A, B, F, G 3 2, 4, (>2 000 to ) 2.14 % Kistler Vibration System 8002K/ Vibration, A, F, G 3 (> to ) 3.12 % Version 017 Issued: 06/24/2014 Page 1 of 5

3 Vibration, A, F, G 3 (> to ) 4.08 % Vibration, A, F, G 3 (> to ) 5.08 % Vibration, C 3 (5 to 2 000) 1.24 % Vibration, C 3 2, 4, (>2 000 to ) 2.14 % Kistler Vibration System 809K112/ Vibration, C 3 (> to ) 3.12 % Vibration, C 3 (> to ) 4.12 % Vibration, C 3 (> to ) 5.12 % Vibration 6 (5 to <10) (10 to <20) (20 to 1 000) 100 (>1 000 to 5 000) (>5 000 to ) 2.00 % 1.00 % 0.75 % 0.50 % 1.50 % 2.50 % Spektra Calibration System CS Vibration, Rotational % Kistler Vibration System 8002K/ Charge 3 (10 to ) pc 0.18 % Charge 3 (10 to ) pc 0.51 % Keithley LCZ Meter 3322 Kistler Charge Calibrator 5395A Version 017 Issued: 06/24/2014 Page 2 of 5

4 Gain Accuracy 2,3 0.5 to % DC Voltage - Source 6 (-10 to 10 V) 0.1 V DC Voltage - Measure 6 (0 to 20) V V National Instruments Data Acquisition Board PXI-4461 Hewlett Packard Universal Source 3245A Keithley Digital Multimeter II. Time & Frequency PARAMETER / Frequency - Measure 6 (0 to ) Time - Measure 6 (0 to 150) µs 0.93 µs Agilent Universal Counter 53131A III. Mechanical PARAMETER / Force, Dynamic 3 Up to 5 lbf 1.5 % Force, Impulse Hammer 3 Up to lbf 1.3 % Rice Lake 5 lb Mass Agilent Spectrum Analyzer 3562A Version 017 Issued: 06/24/2014 Page 3 of 5

5 Force, Static 3 Up to lbf 0.18 % Force, Static 6 Up to 500 N Up to N Up to N 0.30 % 0.12 % 0.12 % Absolute 3 Up to 500 psi 0.37 % Sinusoidal 3 Up to psi 0.42 % Dynamic Low 3 Up to psi 0.33 % Morehouse Ring Dynamometers MTS Criterion C Load Frame Mensor Digital Pressure Gage Mansfield and Green Deadweight Tester Static 6 Up to psi 0.42 % Reference Pressure Sensor Static 3 Up to psi 0.18 % Mansfield and Green Deadweight Tester Static 3 Up to psi 0.18 % Static 3 Up to psi 0.56 % Mansfield and Green Deadweight Tester Sensotec High Pressure Transducer (Current) 4 Up to psi 0.25 % (Voltage) 4 Up to psi 0.2 % Mensor Digital Pressure Gage (Current) 4 Up to psi 0.25 % Pressurements Dead Weight Tester Version 017 Issued: 06/24/2014 Page 4 of 5

6 (Voltage) 4 Up to psi 0.2 % Pressurements Dead Weight Tester Velocity 6 Up to 330 kph 0.17 % Speed Measurement System Notes: 1. Calibration and Measurement Capability Uncertainties (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2. 2. Gain Accuracy is expressed as a ratio of input voltage to output voltage, therefore it has no units. 3. Calibration and Measurement Capability is expressed as a percent of reading. 4. Calibration and Measurement Capability is expressed as a percent of range. 5. This scope is part of and must be included with the Certificate of Accreditation No. AC This calibration is performed at the Kistler Satellite Lab at Hudson Drive, Novi MI Vice President Version 017 Issued: 06/24/2014 Page 5 of 5