MODEL NO. : LTN156AT03-XXX. The information described in this SPEC is preliminary and can be changed without prior notice.
|
|
|
- Maximilian Baker
- 6 years ago
- Views:
Transcription
1 TO DATE Apr., 29 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO. LTN56AT3XXX NOTE Extension code [ xxx ] LTN56AT3XXX Surface type [ Glare ] The information described in this SPEC is preliminary and can be changed without prior notice. APPROVED BY PREPARED BY Application engineering part, Mobile Division Samsung Electronics Co., Ltd. Doc.No. LTN56AT3XXX Rev.No 4AG949 Page / 3
2 CONTENTS Revision History General Description. Absolute Maximum Ratings. Absolute Ratings of environment.2 Electrical Absolute Ratings 2. Optical Characteristics 3. Electrical Characteristics 3. TFT LCD Module 3.2 Backlight Unit 3.3 LED Driver 4. Block Diagram 4. TFT LCD Module 5. Input Terminal Pin Assignment ( 4 ) 5. Input terminal pin assignment 5.2 LVDS Interface 5.3 Timing Diagrams of LVDS For Transmitting 5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color. 5.5 Pixel format 6. Interface Timing 6. Timing Parameters 6.2 Timing Diagrams of interface Signal 6.3 Power ON/OFF Sequence 7. Outline Dimension 8. Packing 9. Markings & Others. General Precautions. EDID ( 3 ) ( 4 ) ( 5 ) ( 7 ) ( ) ( 3 ) ( 9 ) ( 2 ) ( 23 ) ( 24 ) ( 26 ) ( 28 ) Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 2 / 3
3 REVISION REVISION HISTORY HISTORY Date Revision No. Page Summary Apr A All spec was issued Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 3 / 3
4 GENERAL DESCRIPTION DESCRIPTION LTN56AT3 is a color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as switching devices. This model is composed of a TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 5.6" contains 366 x 768 pixels and can display up to 262,44 colors. 6 O'clock direction is the optimum viewing angle. FEATURES High contrast ratio HD (366 x 768 pixels ) resolution High Color Gamut (Typical 6%) Low power consumption Fast response time LED Back Light with embedded LED Driver DE (Data enable) only mode 3.3V LVDS Interface Onboard EEDID chip Green product (RoHS compliance) APPLICATIONS Notebook PC If the usage of this product is not for PC application, but for others, please contact SEC GENERAL INFORMATION Display area Driver element Display colors Item Number of pixel Pixel arrangement Pixel pitch Display Mode Surface treatment asi TFT active matrix 262, x 768 Specification (H) x (V) ( 5.6 HD diagonal ) Unit mm pixel RGB vertical stripe.252(h) x.252(v) (TYP.) mm Normally white Haze, HardCoating 3H Note 69 Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 4 / 3
5 Mechanical Information Module size Item. ABSOLUTE MAXIMUM RATINGS. ENVIRONMENTAL ABSOLUTE RATINGS Note () Temperature and relative humidity range are shown in the figure below. 95 % RH Max. (4 C Ta) Maximum wet bulb temperature at 39 O C or less. (Ta > 4 C ) No condensation (2) 2ms, half sine wave, one time for ±X, ±Y, ± Z. (3) 5 5 Hz, random vibration, 3min for X, Y, Z. (4) At testing Vibration and Shock, the fixture in holding the Module to be tested have to be hard and rigid enough so that the Module would not be twisted or bent by the fixture. Horizontal (H) Vertical (V) Weight Depth (D) Item Storage temperate Operating temperate (Temperature of glass surface) Shock ( nonoperating ) Vibration (nonoperating) Min Symbol TSTG TOPR Snop Vnop Typ Note () Measurement condition of outline dimension. Equipment Bernier Calipers. Push Force 5g f (minimum) Relative Humidity ( %RH) Operating Range Storage Range Min Temperature ( O C) 2 Max ( 4,9 ) Unit mm mm mm g ( 5,5.4 ) Max ( 6,27.7 ) Unit C C G G Note () Note () () (2),(4) (3),(4) Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 5 / 3
6 .2 ELECTRICAL ABSOLUTE RATINGS () TFT LCD MODULE Item Power Supply Voltage Logic Input Voltage Note () Within Ta (25 ± 2 C ) Symbol VDD VIN Min. VDD.3 VDD.3 VDD +.3 VDD +.3 VDD =3.3V, VSS = GND = V Max. Unit V V Note () () Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 6 / 3
7 2. OPTICAL CHARACTERISTICS The following items are measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state with the methods shown in Note (5). Measuring equipment TOPCON SR3 Viewing Angle Item Contrast Ratio (5 Points) Response Time at Ta ( Rising + Falling ) Average Luminance of White (5 Points) Color Chromaticity ( CIE ) 3 Points White Variation Red Green Blue White Hor. Ver. Symbol CR TRT YL,AVE RX RY GX GY BX BY WX WY θl θh φh φl δl * Ta = 25 ± 2 C, VDD=3.3V, fv= 6Hz, fdclk = 69.3MHz, IF = 2 ma Condition Normal Viewing Angle φ = θ = CR At center Min Typ Max Unit msec cd/m 2 Note (), (2), (5) (), (3) IF=2mA (), (4) (), (5) SR3 Degrees (), (5) SR3 (6) Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 7 / 3
8 Note ) Definition of Viewing Angle Viewing angle range( C/R) Note 3) Definition of Response time Note 4) Definition of Average Luminance of White measure the luminance of white at 5 points. Average Luminance of White ( YL,AVE ) YL,AVE = θ L =9 o 6 O clock direction φ L = 9 o Display data y' x YL4 + YL5 + YL7 + YL9 + YL 5 θ L White(TFT OFF) φ L Normal Line φ = o, θ = o φ H θ R Black(TFT ON) 7 y x' O clock direction φ H = 9 o θ R =9 o Note 2) Definition of Contrast Ratio (CR) Ratio of gray max (Gmax),gray min (Gmin) at 5 points(4, 5, 7, 9, ) Optical Response CR = % 9% % % CR(4) + CR(5) + CR(7) + CR(9) + CR() Points 4, 5, 7, 9, at the figure of Note (6). TR 5 White(TFT OFF) TF VIEW AREA (lines) Time test point Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 8 / 3
9 Note 5) After stabilizing and leaving the panel alone at a given temperature for 3 min, the measurement should be executed. Measurement should be executed in a stable, windless,and dark room. 3 min after lighting the backlight. This should be measured in the center of screen. IF current 2.mA Environment condition Ta = 25 ± 2 C TFTLCD module Photodetector ( TOPCON SR3 ) Field = 2 Center of the screen 5 cm LCD panel [ Optical characteristics measurement setup ] Note 6) Definition of 3 points white variation (δ L ), CR variation( CVER ) [ ~ ] mm mm δ L = mm Maximum luminance of 3 points Minimum luminance of 3 points mm (lines) 3 test point Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 9 / 3
10 3. ELECTRICAL CHARACTERISTICS 3. TFT LCD MODULE Item Voltage of Power Supply Differential Input Voltage for LVDS Receiver Threshold Vsync Frequency Hsync Frequency Main Frequency Rush Current Current of Power Supply Note () Display data pins and timing signal pins should be connected.( GND = V ) (2) fv = 6Hz, fdclk = 69.3MHZ, VDD = 3.3V, DC Current. (3) Power dissipation pattern *a) White Pattern VIEW AREA High Low White Mosaic V. stripe Symbol VDD VIH VIL fv fh fdclk IRUSH IDD Min Typ Display Brightest Gray Level Display Darkest Gray Level V mv mv Hz KHz MHz A ma ma ma *b) Mosaic Pattern Max. Unit Ta= 25 ± 2 C Note VCM = +.2V (4) (2),(3)*a (2),(3)*b (2),(3)*c Doc.No. LTN56AT3XXX Rev.No 4AG949 Page / 3
11 *c) dot Vertical stripe pattern 4) Rush current measurement condition CONTROL SIGNAL (HIGH to LOW) 2V 3.3V C3 uf VDD rising time is 47us GND R 47K R3 47K R2 K C2.VDD M 2SK59 pf.9vdd M2 2SK399 FUSE 47us R G B R G B R G B R G R G B R G B R G B R G R G B R G B R G B R G R G B R G B R G B R G C uf 3.3V VDD ( LCD INPUT) Doc.No. LTN56AT3XXX Rev.No 4AG949 Page / 3
12 3.2 BACKLIGHT UNIT Item LED Forward Current LED Forward Voltage LED Array Voltage Power Consumption Operating Life Time 3.3 LED Driver Symbol IF VF VP P Hr Min. 9 2, Typ Max Unit ma V V W Hour Ta= 25 ± 2 C Note VF x 8 LEDs Note () Life time (Hr) of LEDs can be defined as the time in which it continues to operate under the condition Ta= 25 ± 2 C and IF = 2. marms until one of the following event occurs.. When the brightness becomes 5% or lower than the original. Item Input Voltage Enable Control Level PWM Control Level PWM Control Duty Ratio PWM Input Frequency Symbol Vin % Note Test Equipment Fluke 45 V VPWM BLIM Min. 6.2 Typ. 2 Max Unit V V V % KHz () Ta= 25 ± 2 C Note ON Level 2V~5V OFF Level V ~.5V High Level 2.7V~5V Low Level V ~.3V Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 2 / 3
13 4. BLOCK DIAGRAM 4. TFT LCD Module Input Connector IPEX 24554E or Compatible LED Controller I 2 C bus LVDS DCDC Converter LED B/L Video Signal Control Signal VCOM LED Power&signal DVDD AVDD Von/Voff Gamma Feedback EDID EEPROM LVDS Input/mLVDS Output Timing Controller 4.2 LED connection and placement Gamma Generator VCOM Generator SOURCE PCB mlvds Source Driver IC 5.6 HD TFTLCD Panel TFT on Glass Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 3 / 3
14 5. INPUT TERMINAL PIN ASSIGNMENT 5.. Input terminal pin assignment (LVDS, Connector 24554E by IPEX or equivalent ) No. 2~ ~ ~ ~ ~3 3~ Signal NC AVDD DVDD NC SCL SDA Rin+ GND Rin+ GND Rin2+ GND ClkIN+ GND NC GND NC GND NC GND NC ClkIN Rin2 Rin Rin VBL NC BLIM BL_Enable No Connection Power Supply, 3.3V ( typical) DDC 3.3V power No Connection DDC Clock DDC Data LVDS differential data input (RR5, G) +LVDS differential data input (RR5, G) Ground LVDS differential data input (GG5, BB) +LVDS differential data input (GG5, BB) Ground LVDS differential data input (B2B5, HS, VS, DE) +LVDS differential data input (B2B5, HS, VS, DE) Ground LVDS differential clock input +LVDS differential clock input Ground No Connection Ground No Connection Ground No Connection Ground No Connection LED Ground No Connection PWM for luminance control (2~KHz, 3.3V, ~%) BL On/Off (On2.~3.3V, Off ~.5V) NC No Connection Description 38~4 VBL+ LED Power Supply 6V~2V Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 4 / 3
15 5.2 LVDS Interface Transmitter SN75LVDS86 or Compatible Pin No Graphics controller 8bit RED RED RED2 RED3 RED4 RED5 GREEN GREEN GREEN2 GREEN3 GREEN4 GREEN5 BLUE BLUE BLUE2 BLUE3 BLUE4 BLUE5 Hsync Vsync Enable CLOCK Name TxIN TxIN TxIN2 TxIN3 TxIN4 TxIN5 TxIN6 TxIN7 TxIN8 TxIN9 TxIN RGB Signal R R R2 R3 R4 R5 G G G2 G3 G4 SN75LVDS86 TxIN TxIN TxIN2 TxIN3 TxIN4 TxIN5 TxIN6 TxIN7 TxIN8 TxIN9 TxIN TxIN TxIN2 TxIN3 TxIN4 TxIN5 TxIN6 TxIN7 TxIN8 TxIN9 TxIN2 TxClkIN Pin No LVDS INTERFACE TxOUT+ TxOUT+ TxOUT2+ RxCLKIN TxOUT TxOUT TxOUT2 TxCLKOUT TxCLKOUT+ IPEX 24554E Name TxIN TxIN2 TxIN3 TxIN4 TxIN5 TxIN6 TxIN7 TxIN8 TxIN9 TxIN2 TxCLKIN 9 RGB Signal G5 B B B2 B3 B4 B5 Hsync Vsync DE Clock LVDS+I/F IC 3 RxIN Ω 4 RxIN+ 5 RxIN Ω 6 RxIN+ 7 RxIN2 Ω 8 RxIN2+ Ω RxCLKIN+ Note ) The LCD Module uses a ohm resistor between positive and negative lines of each receiver input. Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 5 / 3
16 5.3 Timing Diagrams of LVDS For Transmission LVDS Receiver Integrated TCON T TxCLK OUT RxCLK IN Rx IN2 Rx IN RxIN T/7 RxOUT2 RxOUT9 RxOUT8 RxOUT7 RxOUT6 RxOUT5 RxOUT4 DE Vsync Hsync B5 B4 B3 RxOUT3 RxOUT2 RxOUT RxOUT RxOUT9 RxOUT8 RxOUT7 B B G5 G4 G3 G2 G RxOUT6 RxOUT5 RxOUT4 RxOUT3 RxOUT2 RxOUT RxOUT G R5 R4 R3 R2 R R B2 Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 6 / 3
17 Doc.No. Rev.No Page / 3 LTN56AT3XXX 7 4AG Input Signals, Basic Display Colors and Gray Scale of Each Color Note ) Definition of gray Rn Red gray, Gn Green gray, Bn Blue gray (n=gray level) Note 2) Input signal =Low level voltage, =High level voltage B3 B6 B2 B Dark B Black Gray Scale Of Blue G6 G3 G6 G2 G Dark G Black Gray Scale Of Green B63 Blue B62 Light B6 G63 Green G62 Light R63 Red R62 Light R6 R3 R6 R2 R Dark R Black Gray Scale Of Red White Yellow Magenta Red Cyan Green Blue Black Basic Colors B5 45 B3 B2 B B G5 G4 G3 G2 G G R5 R4 R3 R2 R R Blue Green Red Gray Scale Level Data Signal Display Color
18 5.5 Pixel Format in the display Line Line 768 R G B R G B R G B LTN56AT3 Panel R G B R G B R G B R G B R G B 366 Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 8 / 3
19 6. INTERFACE TIMING 6. Timing Parameters 6.2 Timing diagrams of interface signal DE Frame Frequency Vertical Active Display Term One Line Scanning Time Horizontal Active Display Term DCLK Signal Item Cycle Display Period Cycle Display Period TC TVD Symbol TV TVD TH THD Min TV TH Typ Max Unit Lines Lines Clocks Clocks DE DATA SIGNALS THD Valid display data ( 366 clocks) Note Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 9 / 3
20 6.3 Power ON/OFF Sequence To prevent a latchup or DC operation of the LCD module, the power on/off sequence should be as the diagram below. Power Supply VDD Timing (ms).5<t <T 2 5 <T T 4 2 T 5 2 T 6 <T 7 <T 8 <T 9.5<T.5<T <T 2 Delay from LED driver Vin rising time 9% to PWM ON Delay from PWM Off to LED driver Vin falling time % <T 3 <T 4 <T 5 Signals LED Power (V in ) PWM B/L Enable V V V V V.9 V DD.9 V DD. V DD. V DD T T 2. V in VALID T 8 T 9 V DD rising time from % to 9% Delay from V DD to valid data at power ON T 5 T.9 V in T 2 T 4 T 5 Delay from valid data OFF to V DD OFF at power Off V DD OFF time for Windows restart Delay from valid data to B/L enable at power ON Delay from valid data off to B/L disable at power Off V DD falling time from 9% to % Delay from valid data on to LED driver Vin rising time % Delay from LED driver Vin falling time % to valid data Off LED V in rising time from % to 9% T 3 LED V in falling time from 9% to % Delay from PWM ON to B/L Enable ON Delay from B/L Enable Off to PWM Off T T 6 Remarks T 3.9 V in. V in T 7 T 4 Note Backlight may flash if interface signal remains floating state at invalid period. Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 2 / 3
21 7. Mechanical Outline Dimension Refer to the next page Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 2 / 3
22 This page will be replaced with the outline drawing after producing PDF file. Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 22 / 3
23 8. PACKING. CARTON(Internal Package) () Packing Form Corrugated Cardboard box and Corrupad form as shock absorber (2) Packing Method CUSHION BOTTOM PANEL 2EA/SLIT Note () Total Approx. 24g (2) Acceptance number of piling 2 sets (3) Carton size 344(W) X 432(D) X 329(H) CUSHION TOP, BOTTOM Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 23 / 3
24 (3)Packing Material No MARKINGS & OTHERS A nameplate bearing followed by is affixed to a shipped product at the specified location on each product. ()Parts number LTN56AT3 (2)Revision code 3 letters (3)Lot number X X X X XXX XX X xxx Part name Static electric protective sack Packing case (Inner box) included shock absorber Pictorial marking Carton (4) Nameplate Indication 843 LTN56AT3 XXXXXXXXXX CT XXXXXXXXXXXXXX 8 mm Quantity Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 24 / 3 2 set 2 pcs set SEC Revision Code Panel number Cell ID Lot ID Month Year Product Code Line xxx 4 mm MADE IN CHINA Parts name LTN56AT3 Lot number XXXXXXXXXX Inspected work week 843 (28 year 43rd week) Product Revision Code xxx CT code XXXXXXXXXXXXXX (Released after HP s approval)
25 (5) High voltage caution notice HIGH VOLTAGE CAUTION RISK OF ELECTRIC SHOCK DISCONNECT THE ELECTRIC POWER BEFORE SERVICE (6) Packing small box attach 7mm DEVICE LTN56AT3 TYPE xxx QTY PCS MADE IN CHINA XXXXXXXXXX PN XXXXXX XXX THIS COVER CONTAINS FLUORESCENT LAMP. PLEASE FOLLOW LOCAL ORDINANCES OR REGULATIONS FOR ITS DISPOSAL (7) Packing box Marking Samsung TFTLCD Brand Name mm Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 25 / 3
26 . GENERAL PRECAUTIONS. Handling (a) When the module is assembled, It should be attached to the system firmly using every mounting holes. Be careful not to twist and bend the modules. (b) Refrain from strong mechanical shock and / or any force to the module. In addition to damage, this may cause improper operation or damage to the module and CCFT backlight. (c) Note that polarizers are very fragile and could be easily damaged. Do not press or scratch the surface harder than a HB pencil lead. (d) Wipe off water droplets or oil immediately. If you leave the droplets for a long time, Staining and discoloration may occur. (e) If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth. (f) The desirable cleaners are water, IPA (Isoprophyl Alcohol) or Hexane. Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the polarizer due to chemical reaction. (g) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, legs or clothes, it must be washed away thoroughly with soap. (h) Protect the module from static, it may cause damage to the CMOS Gate Array IC. (i) Use fingerstalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (j) Do not disassemble the module. (k) Do not pull or fold the lamp wire. (l) Do not adjust the variable resistor which is located on the back side. (m) Protection film for polarizer on the module shall be slowly peeled off just before use so that the electrostatic charge can be minimized. (n) Pins of I/F connector shall not be touched directly with bare hands. Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 26 / 3
27 2. STORAGE (a) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended to store the module with temperature from to 35 C and relative humidity of less than 7%. (b) Do not store the TFTLCD module in direct sunlight. (c) The module shall be stored in a dark place. It is prohibited to apply sunlight or fluorescent light during the store. 3. OPERATION (a) Do not connect,disconnect the module in the Power On condition. (b) Power supply should always be turned on/off by following item 6.3 Power on/off sequence. (c) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference. (d) The standard limited warranty is only applicable when the module is used for general notebook applications. If used for purposes other than as specified, SEC is not to be held reliable for the defective operations. It is strongly recommended to contact SEC to find out fitness for a particular purpose. 4. OTHERS (a) Ultraviolet ray filter is necessary for outdoor operation. (b) Avoid condensation of water. It may result in improper operation or disconnection of electrode. (c) Do not exceed the absolute maximum rating value. ( the supply voltage variation, input voltage variation, variation in part contents and environmental temperature, so on) Otherwise the module may be damaged. (d) If the module displays the same pattern continuously for a long period of time,it can be the situation when the image sticks to the screen. (e) This module has its circuitry PCB s on the rear side and should be handled carefully in order not to be stressed. Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 27 / 3
28 . EDID Address Value ASCII FUNCTION (HEX) HEX Data FF FF FF 255 Header 4 FF FF FF C 76 S ID Manufacturer Name E 9 A3 63 C A 5 8 [Q] ID Product Code B 32 5 [2] C D 32bit serial no. E F Week of manufacture Year of manufacture EDID Structure Ver. 3 EDID revision # Video input definition Max H image size Max V image size Display Gamma Feature support A 9 Red/green low bits A Blue/white low bits F5 245 B Red x/ high bits BIN C Red y 57 D Green x 4F E Green y 8C F Blue x 27 2 Blue y 27 2 White x 5 22 White y Established timing 24 Established timing 2 25 Established timing 3 DEC or EDID Header 3 character ID "SEC" 28 EDID Ver.. EDID Rev cm(approx) 9 cm(approx) Gamma 2.2 Red x.58= Red y.34= Green x.3= Green y.55= Blue x.55= Blue y.55= White x.33= White y.329= Notes Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 28 / 3
29 26 Standard timing # Standard timing #2 29 2A Standard timing #3 2B 2C Standard timing #4 2D 2E Standard timing #5 2F 3 Standard timing # Standard timing # Standard timing # B A 5 8 3B 768 3C C 2 2 3D E F Detailed timing/monitor descriptor # C A 4B F 5 4C 4D 4E 4F Detailed timing/monitor 5 descriptor # E 3 56 B not used not used not used not used not used not used not used not used Main clock= 69.3 MHz Hor active=366 pixels Hor blanking=4 pixels 4bit 4bit Vertcal active=768 lines Vertical blanking=2 lines 4bit 4bit H sync. Offset=48 pixels H sync. Width=32 pixels V sync. Offset=2 lines V sync. Width=5 lines 2bit 2bit 2bit 2bit H image size= 344 mm(approx) V image size = 94 mm(approx) No Horizontal Border No Vertical Border Manufacturer Specified (Timing) Value=HSPWmin / 2 Value=HSPWmax / 2 Value=Thbpmin /2 Value=Thbpmax /2 Value=VSPWmin /2 Value=VSPWmax /2 Value=Tvbpmin / 2 Value=Tvbpmax / 2 Thpmin=value*2 + HA pixelclks Thpmax=value*2 + HA pixelclks Tvpmin=value*2 + VA lines Tvpmax=value*2 + VA lines Module revision Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 29 / 3
30 5A 5B 5C 5D FE 254 5E 5F [S] [A] 6 Detailed timing/monitor 4D 77 [M] 62 descriptor # [S] [U] 64 4E 78 [N] [G] 66 A [^] [ ] [ ] [ ] 6A 2 32 [ ] 6B 2 32 [ ] 6C 6D 6E 6F FE [] [5] 73 Detailed timing/monitor [6] 74 descriptor # [A] [T] [] [3] 78 2D 45 [] [H] 7A 3 48 [] 7B 3 49 [] 7C A [^] 7D 2 32 [ ] 7E Extension Flag 7F Checksum B 27 ASCII Data String Tag Monitor Name Tag (ASCII) Doc.No. LTN56AT3XXX Rev.No 4AG949 Page 3 / 3
MODEL NO. : LTN156AT03-XXX. The information described in this SPEC is preliminary and can be changed without prior notice.
Shown by LCDSCREEN.COM.UA TO DATE Apr., 29 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO. LTN56AT3XXX NOTE Extension code [ xxx ] LTN56AT3XXX Surface type [ Glare ] The information described in this SPEC is preliminary
MODEL NO. : LTN156AT09-H03 Technical Customer Support Team, LCD Division Samsung Electronics Co., Ltd. Approval : : Mar.
TO DATE Mar. 8, 2 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO. LTN56AT9H3 NOTE Extension code [ H3 ] LTN56AT9H3 Surface type [ Glare ] Any Modification of Spec is not allowed without SEC permission. APPROVED
MODEL NO. : LTN156AT05-H01
TO DATE Oct. 8. 29 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO. LTN56AT5H NOTE Extension code [ H ] LTN56AT5H Surface type [ Glare ] Any Modification of Spec is not allowed without SEC permission. APPROVED
CONTENTS Revision History General Description. Absolute Maximum Ratings. Absolute Ratings of environment.2 Electrical Absolute Ratings 2. Optical Char
TO DATE Jun. 4, 29 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO. LTN4AT7H NOTE Extension code [ H ] LTN4AT7H Surface type [ Glare ] Any Modification of Spec is not allowed without SEC permission. APPROVED BY
Application engineering part, Mobile Division Samsung Electronics Co., Ltd.
TO DATE : General : Jan. 25, 2013 SAMSUNG TFT-LCD MODEL NO. : LTN156AT19-0 NOTE : Extension code [ - 0xx ] LTN156AT19-0xx Surface type [ A/G ] Any modification of Spec is not allowed without SEC s permission
MODEL NO. : LTN140AT02-C
TO DATE General Feb, 3, 29 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO. LTN4AT2C NOTE Extension code [C2] Surface type [ Glare ] Any Modification of Specification is not allowed without SEC's Permission. SAMSUNG
MODEL NO : LTN173KT01-C01
TO DATE Apr. 2. 29 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO LTN73KTC NOTE Extension code [C] LTN73KTC Surface type [ Glare ] The information described in this SPEC is preliminary and can be changed without
MODEL NO : LTN156AT02-D
TO DATE December. 5. 28 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO LTN56AT2D NOTE Extension code [ D ] LTN56AT2D Surface type [ Glare, True life ] The information described in this SPEC is preliminary and
MODEL NO : LTN156AT14-F01. The information described in this SPEC is preliminary and can be changed without prior notice. S.K Lee
TO DATE July 6. 2 SAMSUNG SAMSUNG TFTLCD TFTLCD MODEL NO LTN56AT4F NOTE Extension code [ F ] LTN56AT4F Surface type [ Glare ] The information described in this SPEC is preliminary and can be changed without
MODEL NO.: G150XGE SUFFIX: L04
Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. G5XGE SUFFIX L4 Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation
CHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: EJ101IA-01F Date: 2012/01/03 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment Approved
MODEL NO.: G150XGE SUFFIX: L05
Tentative Specification Preliminary Specification Approval Specification MODEL NO. G5XGE SUFFIX L5 Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with your signature
MODEL NO.: G154IJE SUFFIX: L02
Tentative Specification Preliminary Specification Approval Specification MODEL NO. G54IJE SUFFIX L2 Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with your signature
HannStar Product Specification
Document Title HSD121PHW1-A Tentative Specification For Mitac Page No. 1/26 TO Mitac International Corporation (MIC) Date Apr., 10, 2009 HannStar Product Specification (Tentative) Model HSD121PHW1 -A01
MODEL NO.: N156B6-L0B
Doc No. 44433 Issued Date Dec. 24, 29 Model No. N56B6-LB TFT LCD Specification MODEL NO. N56B6-LB 2--3 8329 Customer Approved by Note NB 2..3 Director Accept / 33 Version 2. Doc No. 44433 Issued Date Dec.
Document Title HSD160PHW1-B Formal Specification Page No. 1/26. Document No. Revision 1.0. HannStar Product Specification.
Document Title HSD160PHW1-B Formal Specification Page No. 1/26 HannStar Product Specification (Formal) Model HSD160PHW1 -B00 Note (1) Please contact before designing your product based on this module specification.
PRODUCT SPECIFICATION
Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. G54I SUFFIX LE Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with
MODEL NO.: G101ICE SUFFIX: L01
Tentative Specification Preliminary Specification Approval Specification MODEL NO. GICE SUFFIX L Customer Rational APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with
SPECIFICATION APPROVED BY: ( FOR CUSTOMER USE ONLY ) SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: 2016/07/25. EA TFT070-84ATP Page 1 of 19
SPECIFICATION MODULE NO.: EA TFT070-84ATP APPROVED BY: ( FOR CUSTOMER USE ONLY ) PCB VERSION: DATA: SALES BY APPROVED BY CHECKED BY PREPARED BY ISSUED DATE: 2016/07/25 EA TFT070-84ATP Page 1 of 19 Content
MODEL NO.: N101ICG SUFFIX: L21
Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. NICG SUFFIX L2 Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with
MODEL NO.: N140BGE SUFFIX: L42. Customer: CMI Standard Spec. Please return 1 copy for your confirmation with your signature and comments.
Customer CMI Standard Spec APPROVED BY Name / Title Doc. Number SIGNATURE Please return copy for your confirmation with your signature and comments. Tentative Specification Preliminary Specification Approval
Thin-Film-Transistor LCD Module Model: GDT-3.5M320240LC-01-T
D 2015,04,03 1 / 20 Thin-Film-Transistor LCD Module Acceptance Approved and Checked by Approved by Checked by Made by XIAMEN OCULAR OPTICS CO., LTD D 2015,04,03 2 / 20 Revise Records Rev. Date Contents
HannStar Product Specification
Document Title HSD101PWW1-A Formal Specification Page No. 1/26 TO Date Mar., 29, 2011 HannStar Product Specification (Formal) Model HSD101PWW1 -A00 Note (1) Please contact before designing your product
MODEL NO.: G150XJE SUFFIX: E01
V.6/8 PRODUCT SPECIFICATION Tentative Specification Preliminary Specification Approval Specification MODEL NO. G5XJE SUFFIX E Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your
Document No. DC Revision 2.6. HannStar Product Information. (Formal) Model: HSD101PFW2 -A00
Document Title HSD101PFW2-A00 Formal Specification Page No. 1/28 TO Date Jul., 13, 2011 HannStar Product Information (Formal) Model HSD101PFW2 -A00 Note (1) Please contact HannStar Display Corp. before
MODEL NO.: N133BGE SUFFIX: LB1. Please return 1 copy for your confirmation with your signature and comments. Approved By Checked By Prepared By
Global LCD Panel Exchange Center Customer SONY APPROVED BY Name / Title Note Doc. Number SIGNATURE Please return copy for your confirmation with your signature and comments. Tentative Specification Preliminary
TECHNICAL SPECIFICATION MODEL NO : PD080SL3
Version :0.1 TECHNICAL SPECIFICATION MODEL NO : The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer s Confirmation
MODEL NO.: G104V1-T03
Issued DateJuly 3, 2 Model No. G4V -T3 TFT LCD Specification MODEL NO. G4V-T3 Customer Approved by Note 2-7-22 92922 APPL Director Accept / 27 Version 2. Issued DateJuly 3, 2 Model No. G4V-T3 - CONTENTS
MODEL NO.: G156BGE SUFFIX: L03
Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. G56BGE SUFFIX L3 Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation
ZETTLER DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY XIAMEN ZETTLER ELECTRONICS CO., LTD. CUSTOMER APPROVAL
ZETTLER DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL PART NO. : ATM1040D3 (ZETTLER DISPLAYS) VER1.0 COMPANY APPROVAL CHOP CUSTOMER COMMENTS ZETTLER DISPLAYS ENGINEERING APPROVAL
Product Specification
Note: The content of this specification is subject to change. Product Specification Doc. Total Page 18 Date 2011/05/18 7 COLOR TFT-LCD MODULE MODEL NAME: C070VW04 VB < >Preliminary Specification < >Final
FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA
Datasheet CHIMEI Innolux G5XGE-L4 CH--43 FOR MORE INFORMATION AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http//www.AZDISPLAYS.com The information contained in this document has been carefully
MODEL NO.: N101LGE SUFFIX: L21. Please return 1 copy for your confirmation with your signature and comments.
Doc. Number 44858 Tentative Specification Preliminary Specification Approval Specification MODEL NO. NLGE SUFFIX L2 Customer Toshiba APPROVED BY SIGNATURE Name / Title Note Please return copy for your
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT043TN13 V.10 Date: 2006/08/02 Version: 02 Preliminary Specification Final Specification For Customer s Acceptance Approved by
MODEL NO.: N101L6 Suffix:- L0D
Doc No. 4449 Issued Date Dec. 22, 29 Model No. NL6 TFT LCD Specification MODEL NO. NL6 Suffix- LD Customer Approved by Note 29-2-25 498 NB 29.2.25 Director Accept / 3 Version 2. Doc No. 4449 Issued Date
Specification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. C O N T E N T S NO. ITEM PAGE
MODEL NO.: N156BGE SUFFIX: L41
Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. N56BGE SUFFIX L4 Customer Common Model APPROVED BY SIGNATURE Name / Title Note Please return copy for your
MODEL NO.: N156BGE SUFFIX: L41. Customer: Common Model. Please return 1 copy for your confirmation with your signature and comments.
Customer Common Model APPROVED BY Name / Title Note Doc. Number SIGNATURE Please return copy for your confirmation with your signature and comments. Tentative Specification Preliminary Specification Approval
TechToys Company Unit 1807, Pacific Plaza, 410 Des Voeux Road West, Hong Kong Tel: Fax: Web site:
Description 5 TFT LCD Module with Touch Panel Model Name TY500TFT800480 Rev01 Product Revision 01 Date 1 st Sep 2011 Doc. Number TY500TFT800480 Rev01 Doc. Revision 01 TechToys Company Unit 1807, Pacific
CHIMEI INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION. Customer: Model Name: N070ICG-LD1 Date: 2012/04/09 Version: 01. Preliminary Specification
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer Model Name N7ICG-LD Date 22/4/9 Version Preliminary Specification Final Specification Approved by Comment Approved by Reviewed by Prepared by Stanley
MODEL NO.: G150XNE SUFFIX: L01
Tentative Specification Preliminary Specification Approval Specification MODEL NO. G5XNE SUFFIX L Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with your signature
18cm COLOUR TFT-LCD MODULE (7 TYPE) LT070AC46100 (p-si TFT) All information is subject to change without notice. Please read bottom notes.
Toshiba Mobile Display Co., Ltd PRODUCT INFORMATION 18cm COLOUR TFT-LCD MODULE (7 TYPE) LT070AC46100 (p-si TFT) All information is subject to change without notice. Please read bottom notes. FEATURES(1)7
All information is subject to change without notice. Please read bottom notes. Specifications. ABSOLUTE MAXIMUM RATINGS Item Min. Max.
Toshiba Matsushita Display Technology Co., Ltd. PRODUCT INFORMATION 31cm COLOUR TFT-LCD MODULE (12.1 TYPE) LTD121EA4X (p-si TFT) All information is subject to change without notice. Please read bottom
Document Title HSD121PX12-A Product Information Page No. 1 / 26. Document No. Revision 1.0. HannStar Product Information. Model : HSD121PX12 -A
Document Title HSD121PX12-A Product Information Page No. 1 / 26 HannStar Product Information Model HSD121PX12 -A Note 1. Please contact before designing your product based on this module specification.
FORMIKE ELECTRONIC CO.,LTD
PRODUCT SPECIFICATION TFT LCD MODULE MODEL : KWH104KQ05-F01 Preliminary Specification Finally Specification CUSTOMER'S APPROVAL SIGNATURE: DATE: APPROVED PM PD PREPARED BY REVIEWD REVIEWD BY Kam / Stephen
MODEL NO.: G057VGE SUFFIX: T01
PRODUCT SPECIFICATION Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. G57VGE SUFFIX T Customer APPROVED BY SIGNATURE Name / Title Note Please return copy
The LCD(M) Specialist
The LCD(M) Specialist CONTACT ADDRESS : 14F-15F, No.383, Yangming Rd.,Sanmin District, Kaohsiung City 807, Taiwan, R.O.C. Tel: 886-7-3983966 Fax: 886-7-3982966 E-mail: sales@palmtech.com.tw PART NO. :
LCD MODULE SPECIFICATION
MULTI-INNO TECHNOLOGY CO., LTD. LCD MODULE SPECIFICATION Model : MI0700LT Revision Engineering Date Our Reference v01 Record of Revision Version Revise Date Page Content Pre-spec. 01 2007/10/31 Initial
SPECIFICATION G070ACE-L01 7 TFT - WVGA - LVDS. Version: 1.0 Date:
SPECIFICATION G7ACE-L 7 TFT - WVGA - LVDS Version. Date 2.2.28 Note This specification is subject to change without prior notice www.data-modul.com Doc. Number Tentative Target Specification Preliminary
MODEL NO. :LTA400W2-L01
Issued Date : Aug 17, 2004 SAMSUNG TFT-LCD MODEL NO. :LTA400W2-L01 Note : Any Modification of Spec is not allowed without SEC's permission. Senior Engineer : PREPARED BY : AMLCD TECHNICAL CUSTOMER SERVICE
MODEL NO.: N070ICG SUFFIX: LD1
Doc. Number Tentative Specification Preliminary Specification Final Specification MODEL NO. N7ICG SUFFIX LD Customer Common Model APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation
Specification. Revision
Midas Components Limited Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU England Telephone +44 (0)1493 602602 Fax +44 (0)1493 665111 Email sales@midasdisplays.com Website www.midasdisplays.com
Chimei-Innolux Corporation
Chimei-Innolux Corporation BT140GW01 V.A LCD MODULE SPECIFICATION ( ) Preliminary Specification ( ) Final Specification Customer Checked & Approved by Fujitsu Approved by Checked by Prepared by MKT PD
T E C HNIC AL S P E C IF IC AT ION MODE L NO : P D035QU2
V ersion : 0.3 P D035QU2 T E C HNIC AL S P E C IF IC AT ION MODE L NO : P D035QU2 T he content of this information is subject to be changed without notice. P lease contact P V I or its agent for further
All information is subject to change without notice. Please read bottom notes (W) x (H) mm
Toshiba Matsushita Display Technology Co., Ltd PRODUCT INFORMATION 26cm COLOR TFT-LCD MODULE (10.4 TYPE) (p-si TFT) All information is subject to change without notice. Please read bottom notes. FEATURES
TECHNICAL SPECIFICATION MODEL NO. PW056XS2
Version : 0.1 PW056XS2 TECHNICAL SPECIFICATION MODEL NO. PW056XS2 Customer s Confirmation Customer Date By PAGE:1 Revision History Rev. Issued Date Eng. Revised Contents 0.1 Sept. 26, 2007 Preliminary
No. Item Page BASIC SPECIFICATION 1.1 Mechanical Specification. 1.3 Outline Dimension 1.4 Block Diagram 1.5 Interface Pin ELECTRICAL CHARACTERISTICS
CONTENTS: No. Item Page BASIC SPECIFICATION 1.1 Mechanical Specification 1.3 Outline Dimension 1.4 Block Diagram 1.5 Interface Pin ELECTRICAL CHARACTERISTICS 2.3 AC Characteristics 10~12 OPTICAL CHARACTERISTICS
INNOLUX DISPLAY CORPORATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT070TN83 V.1 Date: 2007/12/20 Version: 01 Preliminary Specification Final Specification Option Embedded TTL T-con Board with LED Driver
History of Version. Date Ver. Description Page Design by. 2006/9/4 0 Mass Production - Danny. Total : 25 Page. PH320240T-005-I-Q Ver.
History of Version Date Ver. Description Page Design by 2006/9/4 0 Mass Production - Danny Total : 25 Page PH320240T-005-I-Q Ver. 0 Page2 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications
MODEL NO.: N156BGE SUFFIX: L31
Doc. Number Tentative Specification Preliminary Specification Approval Specification MODEL NO. N56BGE SUFFIX L3 Customer Common Model APPROVED BY SIGNATURE Name / Title Note Please return copy for your
TFT COLOR LCD MODULE. MODEL: OT150CXDDLV-H2 (Complied with RoHS) XGA LVDS interface (1port) Version: P0.3. Customer : 1. Approved By : 1.
V. 05/18 TFT COLOR LCD MODULE MODEL: (Complied with RoHS) XGA LVDS interface (1port) Version: P0.3 Customer : 1 Approved By : 1 Date: 1 ONATION APPROVAL CHECKER PREPARE All information is subject to change
ABSOLUTE MAXIMUM RATINGS Item Min. Max. Unit
Toshiba Matsushita Display Technology Co., Ltd. PRODUCT INFORMATION FEATURES (1) 12.1 XGA(1024x768 pixels) display size for Tablet PC (2) LVDS interface system (H-Sync, V-Sync) (3) Digitizer Easy Insertion
SPECIFICATIONS FOR LCD MODULE
A M P I R E SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. AG-24064B APPROVED BY DATE APPROVED BY CHECKED BY ORGANIZED BY Date :2007/2/7 AMPIRE CO., LTD. 1 RECORD OF REVISION
NHD MF ATXI# T 1
NHD 4.3 480272MF ATXI# T 1 TFT (Thin Film Transistor) Color Liquid Crystal Display Module NHD Newhaven Display 4.3 4.3 Diagonal 480272 480xRGBx272 pixels MF Model A Built in driver / NO Controller T White
TECHNICAL SPECIFICATION MODEL NO. : PW080XU1
Version : 0.2 TECHNICAL SPECIFICATION MODEL NO. : Customer s Confirmation Customer Date By PVI s Confirmation Confirmed By Prepared By This technical specification is subject to change without notice.
NHD MF-ASXV#-T
NHD-3.5-320240MF-ASXV#-T TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD- Newhaven Display 3.5-3.5 Diagonal 320240-320xRGBx240 Pixels MF- Model A- Built-in Driver / No Controller S-
LTA400HF12 MODEL : LTA400HF12. Approval. Customer s s Approval. LCD Business. Samsung Electronics Co., LTD. Customer : Toshiba. DATE : 13. Jan.
Approval Model No. Parts Code V33A3 Customer Toshiba DATE 3. Jan. 2 SAMSUNG TFTLCD LTA4HF2 NOTE Customer s s Approval APPROVED BY DATE 3.Jan.2 SIGNATURE DATE PREPARED BY DATE 3.Jan.2 LCD Business Samsung
All information is subject to change without notice. Please read bottom notes. ABSOLUTE MAXIMUM RATINGS Item Min. Max. Unit
Toshiba Matsushita Display Technology Co., Ltd PRODUCT INFORMATION 21cm COLOR TFT-LCD MODULE (8.4 TYPE) LTM08C351L (p-si TFT) All information is subject to change without notice. Please read bottom notes.
LCD-Module SPECIFICATION
No: 030027 LCD-Module SPECIFICATION Approved by Customer AXFG240128B APPROVED BY CHECKED BY ORGANIZED BY Jeffrey Tina APEX DISPLAY CO., LTD. 1 RECORD OF REVISION Revision Date Page Contents 2003/10/22
LCD TFT Module Specification
LCD TFT Module Specification LCD TFT Datasheet Rev.2.0.0 2017-05-25 ITEM CONTENTS UNIT LCD Type TFT/Transmissive/Normally white / Size 4.3 Inch Viewing Direction 12:00 (without image inversion) O Clock
Document Title HSD170MGW1-A Product Information Page No. 1 / 29. Document No. Revision 1.0. Hannstar Product Information. Model : HSD170MGW1 - A00
Document Title HSD170MGW1-A Product Information Page No. 1 / 29 Hannstar Product Information Model HSD170MGW1 - A00 Note 1. Please contact HannStar Display Corp. before designing your product based on
LCD-Module SPECIFICATION
Spec No: 030026 LCD-Module SPECIFICATION Approved by Customer AXBG240128A APPROVED BY CHECKED BY ORGANIZED BY Jeffrey Tina APEX DISPLAY CO., LTD. 1 RECORD OF REVISION Revision Date Page Contents 2003/10/22
LCD-Module SPECIFICATION
NO: 040022 LCD-Module SPECIFICATION Approved by Customer AXSG12864D APPROVED BY CHECKED BY ORGANIZED BY Tina APEX DISPLAY CO., LTD. 1 RECORD OF REVISION Revision Date Page Contents 2004/03/03 - New Release
Product Specification
Document Title M101NWWB R3 Product Specification Page No. 1/23 Product Specification To: Product Name: M101NWWB R3 Document Issue Date: 2016/03/15 Customer InfoVision Optoelectronics SIGNATURE SIGNATURE
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT080TN52 SPEC NO.: A080-52-TT-02 Date: 2008/03/17 Version: 02 Preliminary Specification Final Specification For Customer s Acceptance
MODEL NO.: G104X1 - L04
Issued Date Aug. 7, 29 Model No. G4X-L4 TFT LCD Specification MODEL NO. G4X - L4 Customer Approved by Note Liquid Crystal Display Division QRA Division. OA Head Division. Approval Approval Version. Issued
Model : HSD170MGW1 -B01
Document Title HSD170MGW1 Product Information for Page No. 1 / 29 TO Date June.25. 2008 HannStar Product Information Model HSD170MGW1 -B01 Note1.The information contained herein is tentative and may be
Specifications 182.0(W) x 108.5(H) x 6.4(D)max mm 1024(W) x 600(H) pixels. ABSOLUTE MAXIMUM RATINGS Item Min. Max. Unit
TOSHIBA MATSUSHITA DISPLAY TECHNOLOGY PRODUCT INFORMATION 18cm COLOR TFT-LCD MODULE (7.0 TYPE) LTM07C382J (p-si TFT) FEATURES (1) 7.0 SVGA-wide display size for palm size PCs (2) High resolution (169 pixel
All information is subject to change without notice. Please read bottom notes.
Toshiba Matsushita Display Technology Co., Ltd PRODUCT INFORMATION FEATURES (1) 12.1 SVGA color display with High Luminance (2) Built in Long Life Lamps(MTTF50,000 h) ( Condition/ Ta25C, I FL 6.0mA(rms)(continuing
LCD MODULE SPECIFICATION
MULTI-INNO TECHNOLOGY CO., LTD. LCD MODULE SPECIFICATION Model : MI0700LT-1 Revision 01 Engineering Date Our Reference Record of Revision Version Revise Date Page Content Pre-spec. 01 2008/01/23 Initial
Item Symbol Absolute Maximum Rating Unit Remarks
Mechanical Characteristics 4.3 TFT LCD asi LCD Color Module The is a compact full color TFT LCD module, that is suitable for portable products, industrial products, hand-held products, security products,
NHD MF-ATXL#-T-1
NHD-3.5-320240MF-ATXL#-T-1 TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD- Newhaven Display 3.5-3.5 Diagonal 320240-320xRGBx240 Pixels MF- Model A- Built-in Driver / No Controller T-
Ver. Edi. Description Page Design by. 05/22/ New Drawing. - Howard. Second Drawing Disp pin internal connect to H Modify Frame Drawing
TECH. CORP. SPECIFICATIONS CUSTOMER : SAMPLE CODE : SH480272T006-IAA02 MASS PRODUCTION CODE : PH480272T006-IAA02 SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 005 DRAWING NO. (Ver.) : LMD-PH480272T006-IAA02(Ver.003)
LCD MODULE YTS700RLAB N Version :1.2 Oct SPECIFICATION. Approved Checked Department. NiuHongLi ZhangFan TP&TFT LCM Department
PRODUCT : LCD MODULE MODEL NO. : YTS700RLAB-01-100N SUPPLIER : ANSHAN YES DATE : Oct.16.2012 SPECIFICATION Approved Checked Department NiuHongLi ZhangFan TP&TFT LCM Department CUSTOMER: MODEL NO.: DATE:
M O D E L N O..:: LT N P G- L0 2
A p p r o v a l T O D A T E : D e l l / C o m p a l : S e t. 1 9. 2 0 0 3 SAMSUNG SAMSUNG TFT-LCD TFT-LCD M O D E L N O..:: LT N 1 5 0 P G- L0 2 Any Modification of Spec is not allowed without SEC permission
SPECIFICATIONS FOR LCD MODULE
A M P I R E SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. AG-16080BYILY-30H-A(R) APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample APPROVED BY
PRODUCT SPECIFICATIONS C-1602A-1YN
PRODUCT SPECIFICATIONS C-1602A-1YN TABLE OF CONTENT 1 COMPOSITION 2 2 MECHANICAL SPECIFICATION 2 3 DIMENSION DIAGRAM 2 4 OPTICAL CHARACTERISTICS 3 4.1 OPTICAL MEASUREMENT SYSTEM 3 4.2 CONTRAST RATIO Cr
InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content Pre Spec /08/02 Initial Rel
InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content Pre Spec. 01 2006/08/02 Initial Release. Final Spec. 01 2006/10/18 1 Add Panel power consumption.
All information is subject to change without notice. Please read bottom notes.
Toshiba Mobile Display Co., Ltd PRODUCT INFORMATION 21cm COLOR TFT-LCD MODULE (8.4 TYPE) LT084AC27E00 (p-si TFT) All information is subject to change without notice. Please read bottom notes. FEATURES
All information is subject to change without notice. Please read bottom notes.
Toshiba Matsushita Display Technology Co., Ltd PRODUCT INFORMATION FEATURES (1) 10.4 SGA color display with High Luminance (2) Built in Long Life Lamps(MTTF50,000 h) ( Condition/ Ta25 C, I FL 6.0mA(rms)(continuing
INNOLUX DISPLAY CORPORATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Ensky Model Name: AT070TN82 V.1 SPEC NO.: A070-82-TT-11 Date: 2008/11/25 Version: 01 Preliminary Specification Final Specification For Customer
Model: AWG-F32240KFWHSGWT-A. LIQUID CRYSTAL DISPLAY MODULE MODEL: AWG-F32240KFWHSGWT-A Customer s No.: Acceptance. Approved and Checked by
Messrs. Product Specification Model: AWG-F32240KFWHSGWT-A Rev. No. Issued Date. Page. A 2008/11/20 1 / 1 LIQUID CRYSTAL DISPLAY MODULE MODEL: AWG-F32240KFWHSGWT-A Customer s No.: Acceptance,,, Approved
LCD TFT Module Specification
LCD TFT Module Specification LCD TFT Datasheet Rev.1.4 2016-10-13 ITEM CONTENTS UNIT LCD Type TFT/Transmissive/Normally white / Size 7.0 Inch Viewing Direction 12:00 (without image inversion) O Clock Gray
TFT MODULE DEM B MMX-PW-N 3,5 MONO - TFT
DISPLAY Elektronik GmbH TFT MODULE DEM 240320B MMX-PW-N 3,5 MONO - TFT Version: 4 11.08.2016 Revision History VERSION DATE Note 0 14.04.2015 First Issue 1 28.04.2015 Modify Reliability 2 04.11.2015 Modify
SPECIFICATIONS FOR LCD MODULE
SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. AM-800480ANTMQW-A0H APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample AMPIRE CO., LTD. 4F., No.116,
Specification G185BGE-L cm (18.5") / WXGA / LVDS / LED. Version: 0.0 Date: January For full specification please ask Data Modul
Specification G185BGE-L01 47.0cm (18.5") / WXGA / LVDS / LED Version: 0.0 Date: January 2012 For full specification please ask Data Modul Note: This specification is subject to change without prior notice
DISPLAY Elektronik GmbH LCD MODULE DEM T SBH-PW-N. Product Specification Version: Version: 2 PAGE: 1
DISPLAY Elektronik GmbH LCD MODULE DEM 128064T SBH-PW-N Version: 1 22.02.2013 Version: 2 PAGE: 1 GENERAL SPECIFICATION MODULE NO. : DEM 128064T SBH-PW-N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL VERSION
SPECIFICATIONS AMP DISPLAY INC
AMP DISPLAY INC. SPECIFICATIONS CUSTOMER: CUSTOMER PART NO. AMP DISPLAY PART NO. APPROVED BY: MODULE DATE: APPROVED FOR SPECIFICATIONS APPROVED FOR SPECIFICATION AND PROTOTYPES AMP DISPLAY INC 9856 SIXTH
億都集團 YEEBO GROUP SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG S06B-C-A1. Doc.Version:03. Accept
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG1280800S06B-C-A1 Customer Approval: Accept Reject APPROVAL FOR SPECIFICATIONS ONLY APPROVAL FOR SPECIFICATIONS AND SAMPLE WIMRD005-02-C Add: 7/F.,On Dak Industrial
Customer Acceptance Specification. Model : HSD022B2N6-A00 HSD022B2N6-B00
l Page No. 1/26 TO Date 2010/02/22 Customer Acceptance Specification Model : HSD022B2N6-A00 HSD022B2N6-B00 Accepted by: Signature Date Proposed by: Technical Service Division Signature Date Note:1. Please