OPTICAL CENTERLINE (3.8 max).15 max. PC board .012 M A (2.8 max).11 max ( ) 2x 4 ( ) RECEPTACLE DUPLEX

Size: px
Start display at page:

Download "OPTICAL CENTERLINE (3.8 max).15 max. PC board .012 M A (2.8 max).11 max ( ) 2x 4 ( ) RECEPTACLE DUPLEX"

Transcription

1 AC/DC (V/.V) V8-H8-C/C AC/AC TTL (V/.V) V8-H8-C/C DC/DC (V/.V) V8-H8-C/C AC/AC PECL (V/.V) V8-H8-C7/C7 Single Mode 00 nm MBd ATM x9 Transceiver Dimensions in (mm) inches (PC board thickness) (9.79 max).8 max product label.9.87 x ( ) (0. 0.) View Z (lead cross section and standoff size).0 M A ( 0.) x 0. M A (0. 0.) (. 0.0) (. 0.) x..8 x 0. M.00 M 8x Z PC board x OPTICAL CENTERLINE (.8 max). max 0. M.0 M (. -0.0) (.8 max). max DUPLEX SC RECEPTACLE A A (0. 0.).0.00 (. 0.) (.0 0.0) (8. max). max 8x..8 (Footprint) 8x. 0. (.). 9x (0.8 0.) M (.) M (.9 0.) x A 0..8 (.88 0.)..0 ( max). max (8. 0.)..00 Process plug included Input Signal Monitor (DC/DC Version) Wave solderable and washable with process plug inserted For distances of up to km on single mode fiber Industry standard multisource footprint FEATURES Compliant with ATM/H, SONET OC-/STM- and SONET OC-/STM- standards Meets mezzanine standard height of 9.8 mm Compact integrated transceiver unit with MQW laser diode transmitter InGaAs PIN photodiode receiver Duplex SC receptacle Class FDA and IEC laser safety compliant FDA Accession No , Single power supply ( V or. V) Signal detect indicator (PECL and TTL versions) PECL differential inputs and outputs Absolute Maximum Ratings Exceeding any one of these values may destroy the device immediately. Package Power Dissipation ().... W Supply Voltage (V CC V EE ) V... 7 V. V... V Data Input Levels (PECL)... V CC +0. V Differential Data Input Voltage.... V Operating Ambient Temperature...0 C to 70 C Storage Ambient Temperature... 0 C to 8 C Soldering Conditions Temp/Time (MIL-STD 88C, Method 00)... 0 C/.s Note. For V CC V EE (min., max.). 0% duty cycle. The supply current does not include the load drive current of the receiver output. APRIL 999

2 DESCRIPTION The Infineon (former SIEMENS company) single mode ATM transceiver complies with the ATM Forum s Network Compatible ATM for Local Network Applications document and ANSI s Broadband IN Customer Installation Interfaces, Physical Media Dependent Specification, T.-99, Bellcore - SONET OC- / IR- and OC- / IR-, ITU-T G.97 STM- / S.. and STM- / S... ATM was developed to facilitate solutions in multimedia applications and real time transmission. The data rate is scalable, and the ATM protocol is the basis of the broadband public networks being standardized in the International Telecommunications Union (ITU), the former International Telegraph and Telephone Consultative Committee (CCITT). ATM can also be used in local private applications. The Infineon single mode ATM transceiver is a single unit comprised of a transmitter, a receiver, and an SC receptacle. This design frees the customer from many alignment and PC board layout concerns. The module is designed for low cost WAN applications. It can be used as the network end device interface in workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, and intelligent hubs, as well as wide area ATM switches. This transceiver operates at.080 Mbits per second from a single power supply (+ Volt or. Volt). The differential data inputs and outputs are PECL compatible. Functional Description This transceiver is designed to transmit serial data via single mode cable. Functional Diagram TD TD RD RD Signal Monitor and Automatic Shut-Down LEN Power Control Monitor ISM* Coupling Unit e/o The receiver component converts the optical serial data into PECL compatible electrical data (RD and RDnot). The Signal Detect (, active high) shows whether an optical signal is present. The transmitter converts electrical PECL compatible serial data (TD and TDnot) into optical serial data. The following versions are available:. AC/DC Transceiver Tx is AC coupled with differential 00 Ω load. Rx has standard PECL output and is DC coupled.. AC/AC TTL Transceiver Tx and Rx are AC coupled. Tx has differential 00 Ω load. Signal Detect is TTL compatible. o/e RX Coupling Unit o/e Single Mode Fiber *DC/DC Version only. DC/DC Transceiver Standard PECL inputs and outputs Tx and Rx are DC coupled. This version contains an Input Signal Monitor (ISM), that switches off the optical power if a continuously low level is applied at Data Input.. AC/AC PECL Transceiver Tx and Rx are AC coupled. Tx has differential 00 Ω load. Signal Detect is PECL compatible. The transmitter contains a laser driver circuit that drives the modulation and bias current of the laser diode. The currents are controlled by a power control circuit to guarantee constant output power of the laser over temperature and aging. The power control uses the output of the monitor PIN diode (mechanically built into the laser coupling unit) as a controlling signal, to prevent the laser power from exceeding the operating limits. Single fault condition is ensured by means of an integrated automatic shutdown circuit that disables the laser when it detects transmitter failures. A reset is only possible by turning the power off, and then on again. The transceiver contains a supervisory circuit to control the power supply. This circuit generates an internal reset signal whenever the supply voltage drops below the reset threshold. It keeps the reset signal active for at least milliseconds after the voltage has risen above the reset threshold. During this time the laser is inactive. TECHNICAL DATA The electro-optical characteristics described in the following tables are only valid for use under the recommended operating conditions. Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Units Ambient Temperature T AMB 0 70 C Power Supply. V V CC V EE... V Voltage V.7. Supply. V I CC 0 ma Current () V 70 Transmitter Data Input High Voltage V IH V CC 880 mv DC/DC Data Input Low Voltage V IL V CC 80 7 DC/DC Data Input Differential Voltage AC/DC, AC/AC TTL, AC/AC PECL V DIFF 0 00 Input Data Rise/Fall t R, t F ps Time 0% 90% Input Center Wavelength λ C 70 nm Note. For V CC V EE (min., max.) 0% duty cycle. The supply current does not include the load drive current of the receiver output. V8-H8-C/C/C/C7, Single Mode 00 nm MBd ATM x9 Trx

3 Transmitter Electro-Optical Characteristics Transmitter Symbol Min. Typ. Max. Units Launched Power P O 8 dbm (Average) () Center Wavelength λ C 7 nm Spectral Width (RMS) σ l. Relative Intensity Noise RIN 0 db/hz Extinction Ratio (Dynamic) ER 8. db Reset Threshold () V TH.7 V Reset Time Out () t RES ms Eye Diagram () ED Notes. Into single mode fiber, 9 µm diameter.. power is shut down if power supply is below V TH and switched on if power supply is above V TH after t RES.. Transmitter meets ANSI TE., SONET OC- and OC-, and ITU-T G.97 mask patterns. Electro-Optical Characteristics Symbol Min. Typ. Max. Units Sensitivity P IN 0 8 dbm (Average Power) () Saturation P SAT 8 (Average Power) Signal Detect P A 8 Assert Level () Signal Detect P D 8 Deassert Level () Signal Detect Hysteresis P A P D. db Signal Detect Assert Time t ASS 00 µs Signal Detect Deassert t DAS 0 Time Output Low Voltage () V OL -V CC 90 0 mv Output High Voltage () V OH -V CC 0 70 Signal Detect Low V L 0. V Output Voltage AC/AC TTL () High V H Data Output Differential Voltage () V DIFF Output Data Rise/Fall Time, 0% 80% t R, t F 7 ps Return Loss of A RL db. Max. output current high: 0. ma (drive current) low: +.0 ma (sink current). AC/AC for data. Load 0 Ω to GND or 00 Ω differential. For dynamic measurement a tolerance of 0mV should be added. LASER SAFETY This single mode transceiver is a Class laser product. It complies with IEC 8- and FDA CFR 00.0 and 00.. The laser Class is guaranteed within the Absolute Maximum Ratings. Caution The use of optical instruments with this product will increase eye hazard! Usage Restrictions The optical ports of the modules should be terminated with an optical connector or with a dust plug. Note Failure to adhere to the above restrictions could result in a modification that is considered an act of manufacturing, and will require, under law, recertification of the modified product with the U.S. Food and Drug Administration (ref. CFR 00.0 (i)). Data Wavelength 00 nm Total output power (as defined by IEC: 0 mm less than aperture at 0 cm distance) mw Total output power (as defined by FDA: 7 mm less than aperture at 0 cm distance) 80 µw Beam divergence Required Labels Emission FDA Complies with CFR 00.0 and 00. Indication of laser aperture and beam IEC Class Product Notes. Minimum average optical power at which the BER is less than x0 E- or lower. Measured with a - NRZ PRBS as recommended by ANSI TE., SONET OC- and OC-, and ITU-T G.97.. An increase in optical power above the specified level will cause the SIGNAL DETECT output to switch from a Low state to a High state.. A decrease in optical power below the specified level will cause the SIGNAL DETECT to change from a High state to a Low state.. DC/DC, AC/DC for data DC/DC, AC/DC, AC/AC PECL for Signal Detect PECL compatible. Load is 0 Ω into V CC V for data, 0 Ω ( V) or 70 Ω (. V) to V (( for Signal Detect. Measured under DC conditions. For dynamic measurements a tolerance of 0 mv should be added. V CC =. V/ V. T AMB = C. V8-H8-C/C/C/C7, Single Mode 00 nm MBd ATM x9 Trx

4 Pin Description Pin Name Level/Logic Pin# Description RxV EE Rx Ground Power Supply Negative power supply, normally ground RD Rx Output Data PECL Output output data RDn Inverted receiver output data RX Signal Detect PECL or TTL High level on this output shows there is an optical signal. RxV CC Rx. V/ V Power Supply Positive power supply,. V/ V TxV CC Tx. V/ V TDn Tx Input Data PECL Input 7 Inverted transmitter input data TD 8 Transmitter input data TxV EE Tx Ground Power Supply 9 Negative power supply, normally ground Stud Pin Mech. Support S/ Not connected Regulatory Compliance Feature Standard Comments Electrostatic Discharge (E) to the Electrical Pins Immunity: Electrostatic Discharge (E) to the Duplex SC Receptacle Immunity: Radio Frequency Electromagnetic Field Emission: Electromagnetic Interference EMI MIL-STD 88C Method 0. EN IEC EN IEC FCC Class B EN 0 Class B CISPR Class (>000 V) Discharges of ±kv with an air discharge probe on the receptacle cause no damage. With a field strength of V/m rms, noise frequency ranges from 0 MHz to GHz. No effect on transceiver performance between the specification limits. Noise frequency range: 0 MHz to GHz; Margins depend on PCB layout and chassis design ATM transceivers and matching circuits are high frequency components and shall be terminated as recommended in the application notes for proper EMI performance. Electromagnetic emission may be caused by these components. To prevent emissions it is recommended that cutouts for the fiber connectors be designed as small as possible. It is recommended that the Tx plug and the Rx plug be separated with a bar that divides the duplex SC opening. V8-H8-C/C/C/C7, Single Mode 00 nm MBd ATM x9 Trx

5 Single Mode 00 nm MBd ATM x9 Transceiver, DC/DC Version TxGND 9 SerDes V /. V 8 7 C C7 R7 R R0 TX+ TX- ECL/PECL R8 Infineon Transceiver V8-H8-C/ DC/DC Option Tx Rx C L L V /. V C Serializer/ Deserializer Signal Detect C to upper level R9 R R Pre- Amp Limiting Amplifier C C PLL etc. RxGND R R R R C// =.7 µf C///7 = 00 nf L/ = µh R0/ = 8 Ω ( V) = 7 Ω (. V) (depends on SerDes chip used) R7/8 = 7 Ω ( V) = 8 Ω (. V ) (depends on SerDes chip used) R/ = 70 Ω ( V) = 0 Ω (. V) R9 = 0 Ω ( V) = 70 Ω (. V) Place R/// close to SerDes chip, depends on SerDes chip used, see application note of SerDes supplier. Place R7/8/0/ close to Infineon Transceiver The following Application Notes assume Fiber Optic Transceivers using V power supply and SerDes Chips using. V power supply. It also assumes no self biasing at the receiver data inputs (/) of the SerDes chip (Refer to the manufacturer data sheet for other applications).. V-Transceivers can be directly connected to SerDes-Chips using standard PECL Termination network. Value of R...R may vary as long as proper 0 Ω termination to V EE or 00 Ω differential is provided. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L/L to the module V CC Rx/V CC Tx. We strongly recommend a GND plane under the module for getting good EMI performance. The transceiver contains an automatic shutdown circuit. Reset is only possible if the power is turned off, and then on again. (V CC Tx switched below V TH ). Application Board available on request. V8-H8-C/C/C/C7, Single Mode 00 nm MBd ATM x9 Trx

6 Single Mode 00nm MBd ATM x9 Transceiver, AC/DC Version TxGND 9 SerDes V /. V 00 Ω 8 7 TX+ TX- ECL/PECL R7 R8 Infineon Transceiver V8-H8-C/ AC/DC Option Tx Rx C L L V /. V C Serializer/ Deserializer Signal Detect C to upper level R9 R R Pre- Amp Limiting Amplifier C C PLL etc. RxGND R R R R C// =.7 µf C/ =00 nf L/ = µh R/ =70 Ω ( V) =0 Ω (. V) R9 =0 Ω ( V) =70 Ω (. V) Place R////7/8 close to SerDes chip, depends on SerDes chip used, see application note of SerDes supplier. Place R/R close to Infineon transceiver Values of R/// may vary as long as proper 0 Ω termination to V EE or 00 Ω differential is provided. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L/L to the module V CC Rx/V CC Tx. We strongly recommend a GND plane under the module for getting good EMI performance. The transceiver contains an automatic shutdown circuit. Reset is only possible if the power is turned off, and then on again. (V CC Tx switched below V TH ). Application Board available on request. V8-H8-C/C/C/C7, Single Mode 00 nm MBd ATM x9 Trx

7 Single Mode 00nm MBd ATM x9 Transceiver, AC/AC TTL and AC/AC PECL Versions TxGND 9 SerDes V /. V 00 Ω 8 7 TX+ TX- ECL/PECL R7 R8 Infineon Transceiver V8-H8-C/ V8-H8-C7/7 AC/AC TTL or PECL Tx Rx C L L V /. V C Serializer/ Deserializer Signal Detect C R9 to upper level R R Pre- Amp Limiting Amplifier R PLL etc. RxGND R C//=.7 µf L/ = µh R/ = Depends on SerDes chip used R/ = Depends on SerDes chip used R7/8 = Biasing (depends on SerDes chip) R9 = open (H8-C/C) = 0 Ω (H8-C7) = 70 Ω (H8-C7) Place R////7/8 close to SerDes chip Place R/ close to Infineon transceiver Values of R/// may vary as long as proper 0 Ω termination to V EE or 00 Ω differential is provided. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L/L to the module V CC Rx/V CC Tx. We strongly recommend a GND plane under the module for getting good EMI performance. The transceiver contains an automatic shutdown circuit. Reset is only possible if the power is turned off, and then on again. (V CC Tx switched below V TH ). Application Board available on request. Infineon Technologies AG i. Gr. Wernerwerkdamm Berlin D-, Germany Infineon Technologies, Corp Homestead Road Cupertino, CA 90 USA Siemens K.K. Takanawa Park Tower 0-, Higashi-Gotanda, -chome, Shinagawa-ku Tokyo, Japan

DC/DC (5V/3.3V) V23826-H18-C63/C363 (*) Single Mode 622 MBd ATM/SDH/SONET 1x9 Transceiver

DC/DC (5V/3.3V) V23826-H18-C63/C363 (*) Single Mode 622 MBd ATM/SDH/SONET 1x9 Transceiver DC/DC (5V/3.3V) V386-H18-C63/C363 (*) Single Mode 6 MBd ATM/SDH/SONET 1x9 Transceiver Dimensions in (mm) inches TRX without shield (PC board thickness) (9.79 max).385 max 1 product label.19 4.875 11x (

More information

3.3 V V23806-A84-C5 Single Mode 155 MBd ATM/SDH/SONET 2x9 Transceiver with Rx Monitor

3.3 V V23806-A84-C5 Single Mode 155 MBd ATM/SDH/SONET 2x9 Transceiver with Rx Monitor 3.3 V V23806-A84-C5 Single Mode 155 MBd ATM/SDH/SONET 2x9 Transceiver with Rx Monitor Dimensions in (mm) inches View Z (Lead cross section and standoff size) (0.73±0.1).028±.004 (1.5±0.1).06±.004 (11.5

More information

Product Specification 1x9 Transceiver with Duplex SC Receptacle Single Mode 1310 nm 21 km SONET OC-3/SDH STM-1 V23836-C18-C63 V23836-C18-C363

Product Specification 1x9 Transceiver with Duplex SC Receptacle Single Mode 1310 nm 21 km SONET OC-3/SDH STM-1 V23836-C18-C63 V23836-C18-C363 Product Specification 1x9 Transceiver with Duplex SC Receptacle Single Mode 1310 nm 21 km SONET OC-3/SDH STM-1 V23836-C18-C63 V23836-C18-C363 PRODUCT FEATURES Compliant with ATM, SONET OC-3, SDH STM-1

More information

5 V PECL DC DC V23826-K305-C363 1)

5 V PECL DC DC V23826-K305-C363 1) Fiber Optics Multimode 850 nm 1.0625 GBd Fibre Channel 1.3 Gigabit Ethernet 1x9 Transceiver V23826-K305-Cxx/Cxxx Features Compliant with Fibre Channel and Gigabit Ethernet standard Meets mezzanine standard

More information

V23870-A211x-xx00 (*) Bi-Directional Pigtail SFF Transceiver 155 Mb/s, 1310 nm Tx / 1310 nm Rx

V23870-A211x-xx00 (*) Bi-Directional Pigtail SFF Transceiver 155 Mb/s, 1310 nm Tx / 1310 nm Rx Preliminary Data Sheet V23870-A211x-xx00 (*) Bi-Directional Pigtail SFF Transceiver 155 Mb/s, 1310 nm Tx / 1310 nm Rx FEATURES Integrated Beam Splitter Bi-Directional Transmission in a single optical window

More information

-RADIANTECH- VFT Fiber Optic Small Form Factor

-RADIANTECH- VFT Fiber Optic Small Form Factor -RADIANTECH- Fiber Optic Small Form Factor Multimode 850 nm 1.0625 GBd Fiber channel 1.25 Gigabit Ethernet 2x5 Transceiver with VF-45 TM (SG) Connector VFT-3143 DESCRIPTION The Gigabit Ethernet multimode

More information

V23818-M305-L57 (*) Small Form Factor Multimode 850 nm and GBd Fibre Channel 2x5 Transceiver with LC Connector. Dimensions in mm [inches]

V23818-M305-L57 (*) Small Form Factor Multimode 850 nm and GBd Fibre Channel 2x5 Transceiver with LC Connector. Dimensions in mm [inches] V23818-M305-L57 (*) Small Form Factor Multimode 850 nm and GBd Fibre Channel 2x5 Transceiver with LC Connector Dimensions in mm [inches] V23818-M305-L57 *) Ordering Information Input Output Signal detect

More information

V23818-C8-V10. Small Form Factor Multimode 1300 nm LED Ethernet/Fast Ethernet/FDDI/ATM 155/194 MBd Transceiver. Preliminary. Dimensions in inches (mm)

V23818-C8-V10. Small Form Factor Multimode 1300 nm LED Ethernet/Fast Ethernet/FDDI/ATM 155/194 MBd Transceiver. Preliminary. Dimensions in inches (mm) V23818-C8-V10 Small Form Factor Multimode 1300 nm LED Ethernet/Fast Ethernet/FDDI/ATM 155/194 MBd Preliminary Dimensions in inches (mm).55 (13.75).62 (15.50) 1.30 (32.50).175 (4.375).29 (7.25).55 (13.75).375

More information

TR1-M4-2023M 1X9 Dual Fiber Fast Ethernet 100 Mb / s 1310 nm Tx / Rx

TR1-M4-2023M 1X9 Dual Fiber Fast Ethernet 100 Mb / s 1310 nm Tx / Rx Description The 1 9 SC duplex 1310nm O-E Transceivers can transmit digital data up to 2 km via Multi-mode optical fiber and the optical performances comply with the Fast Ethernet interface, 155Mbps ATM

More information

PARAMETER SYMBOL MIN MAX UNITS NOTE

PARAMETER SYMBOL MIN MAX UNITS NOTE Features RoHS compliant Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Compliant with IEEE802.3ah 100Base-BX Compliant with ITU-T G.985 class S Industry standard 2 5 footprint SC Connector Single

More information

RoHS compliant 1310 nm Single-mode Transceiver (S1.1, 19dB margin) 1x9, SC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet

RoHS compliant 1310 nm Single-mode Transceiver (S1.1, 19dB margin) 1x9, SC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (S1.1) Industry standard 1 9 footprint SC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with

More information

1.25 Gigabit Ethernet-Multimode Transceiver

1.25 Gigabit Ethernet-Multimode Transceiver 1 9, Duplex SC Connector, 850nm VCSEL for Multimode Fiber, RoHS Compliant Features RoHS Pb Applications Gigabit Ethernet links Fibre Channel links at 1.06 Gbps High speed backplane interconnects Switched

More information

RoHS Compliant 1310 nm Single-mode Transceiver (L1.1) 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet

RoHS Compliant 1310 nm Single-mode Transceiver (L1.1) 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with

More information

155 Mb/s ATM Multi-mode Transceiver

155 Mb/s ATM Multi-mode Transceiver 2 9 (12-pin), Duplex SC / ST Plastic Connector, 1310 nm LED for Multi-mode Fiber Digital Diagnostics Functions, Extended Operating Temperature from 40 to +85 C RoHS Pb Applications Fast Ethernet FDDI ATM/SONET

More information

Features. Ordering Information

Features. Ordering Information Features RoHS compliant Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC connector Single power supply 3.3 V Differential PECL inputs and outputs Class 1 laser product

More information

RoHS compliant 850 nm Multi-mode Transceiver (1000BASE-SX) 1 9, SC Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet

RoHS compliant 850 nm Multi-mode Transceiver (1000BASE-SX) 1 9, SC Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet No Shield Forward Clipper Backward Clipper Features Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 1 9 footprint SC duplex connector Single

More information

RoHS compliant 1310 nm Single-mode Transceiver (L1.1) 1x9, ST Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet.

RoHS compliant 1310 nm Single-mode Transceiver (L1.1) 1x9, ST Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet. Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 1 9 footprint ST duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with

More information

-RADIANTECH- VFP-3143-G. Fiber Optic Small Form Factor

-RADIANTECH- VFP-3143-G. Fiber Optic Small Form Factor -RADIANTECH- Fiber Optic Small Form Factor Multimode 850 nm Pluggable Optical Transceiver for 1.0625 GBd Fibre Channel and 1.25 GBd Gigabit Ethernet with VF-45 TM (SG) Connector VFP-3143-G Product Description

More information

TRS-3050G / TRS-3050TG / TRS-3050FG / TRS-3050AG / TRS-3050ATG / TRS-3050AFG. 3.3V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver

TRS-3050G / TRS-3050TG / TRS-3050FG / TRS-3050AG / TRS-3050ATG / TRS-3050AFG. 3.3V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver * / TRS-3050TG / TRS-3050FG / TRS-3050AG / TRS-3050ATG / TRS-3050AFG 3.3V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver FEATURES Duplex SC Single Mode Transceiver: Duplex ST Single

More information

DESCRIPTION. These transceivers also support 10 Base Fx 1300 nm with DC-free Single power supply (3.3 V)

DESCRIPTION. These transceivers also support 10 Base Fx 1300 nm with DC-free Single power supply (3.3 V) -RADIANTECH- Fiber Optic Small Form Factor VF-45 TM 2x5 Transceiver, with Collar For 1300nm Multimode Fast Ethernet/FDDI/ATM V23818-C8-V17 DESCRIPTION The Radiantech V23818-C8-V17 Ethernet/Fast Ethernet/FDDI/ATM

More information

1.25 Gbps Bi-Directional single fiber SFF transceiver

1.25 Gbps Bi-Directional single fiber SFF transceiver 1.25 Gbps Bi-Directional single fiber SFF transceiver 1310nm TX FP / 1550nm Rx TIA Features Data rates up 1.25Gbps Industry standard 2x5 SFF MSA footprint Integrated WDM filter for dual TX/RX operation

More information

RoHS compliant 1310 nm Single-mode Transceiver (10km) 1 9, ST Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet

RoHS compliant 1310 nm Single-mode Transceiver (10km) 1 9, ST Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet Features Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 1 9 footprint ST duplex connector Single power supply 3.3 V/5V Differential LVPECL/PECL

More information

RoHS compliant 850 nm Multi-mode Transceiver (1000BASE-SX) 2 5, LC Duplex Connector, 3.3 V Gbd Fiber Channel/1.25 Gigabit Ethernet

RoHS compliant 850 nm Multi-mode Transceiver (1000BASE-SX) 2 5, LC Duplex Connector, 3.3 V Gbd Fiber Channel/1.25 Gigabit Ethernet Features RoHS compliant Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 2 5 footprint LC duplex connector Single power supply 3.3V Class 1 laser

More information

TRS-5020G / TRS-5020TG / TRS-5020FG / TRS-5020CG / TRS-5020CTG / TRS-5020CFG. 5V / 1310 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver

TRS-5020G / TRS-5020TG / TRS-5020FG / TRS-5020CG / TRS-5020CTG / TRS-5020CFG. 5V / 1310 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver * / TRS-5020TG / TRS-5020FG / TRS-5020CG / TRS-5020CTG / TRS-5020CFG 5V / 1310 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver FEATURES Duplex SC Single Mode Transceiver: Duplex ST Single

More information

RoHS Compliant 1310 nm Multi-mode Transceiver 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet

RoHS Compliant 1310 nm Multi-mode Transceiver 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet Features Low power consumption Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Class 1 laser product complies with EN 60825-1 Ordering

More information

RoHS compliant 1310 nm Single-mode Transceiver (1000BASE-LX) 2 5, LC Duplex Connector, 3.3 V Gbd Fiber Channel/1.25 Gigabit Ethernet

RoHS compliant 1310 nm Single-mode Transceiver (1000BASE-LX) 2 5, LC Duplex Connector, 3.3 V Gbd Fiber Channel/1.25 Gigabit Ethernet Features RoHS compliant Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 2 5 footprint LC duplex connector Single power supply 3.3V Compatible

More information

V23818-M305-B57. Small Form Factor Pluggable SFP Multimode 850 nm and GBd Fibre Channel Transceiver with LC Connector.

V23818-M305-B57. Small Form Factor Pluggable SFP Multimode 850 nm and GBd Fibre Channel Transceiver with LC Connector. V23818-M305-B57 Small Form Factor Pluggable SFP Multimode 850 nm and GBd Fibre Channel Transceiver with LC Connector Preliminary Dimensions in mm [inches] FEATURES Small Form Factor Pluggable transceiver

More information

V23818-C8-V15 -RADIANTECH- Fiber Optic Small Form Factor VF-45 TM 2x5 Transceiver for 1300nm Multimode Fast Ethernet

V23818-C8-V15 -RADIANTECH- Fiber Optic Small Form Factor VF-45 TM 2x5 Transceiver for 1300nm Multimode Fast Ethernet -RADIANTECH- Fiber Optic Small Form Factor VF-45 TM x5 Transceiver for 1300nm Multimode Fast Ethernet V3818-C8-V15 Dimensions in (mm) inches 7.11.8 4.57.18 3.56.14 1 4x (0.9 max).035 max (13.59).535 Max.

More information

RoHS compliant 1310 nm multi-mode Transceiver (2 km) 1x9, SC Duplex Connector, 5.0 V 155 Mbps ATM/ Fast Ethernet

RoHS compliant 1310 nm multi-mode Transceiver (2 km) 1x9, SC Duplex Connector, 5.0 V 155 Mbps ATM/ Fast Ethernet Features RoHS compliant Industry standard 1 9 footprint SC duplex connector Single power supply 5.0 V Differential LVPECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser

More information

PARAMETER SYMBOL MIN MAX UNITS NOTE

PARAMETER SYMBOL MIN MAX UNITS NOTE Features Industry standard 2 5 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser product complies with

More information

1550 nm Single-mode Transceiver (80km) 1 9, SC Duplex Connector, 3.3 V 622 Mbps ATM/SONET OC-12/SDH STM-4

1550 nm Single-mode Transceiver (80km) 1 9, SC Duplex Connector, 3.3 V 622 Mbps ATM/SONET OC-12/SDH STM-4 No Shield Forward Clipper Backward Clipper Features Industry standard 1 9 footprint SC duplex connector Single power supply 3.3 V Differential LVPECL data inputs and outputs LVPECL Signal Detect output

More information

Features. Description. PART NUMBER TX RX VOLTAGE TEMPERATURE KSB2-A3S-PC-N nm 1310 nm 3.3 V 0 C to 70 C

Features. Description. PART NUMBER TX RX VOLTAGE TEMPERATURE KSB2-A3S-PC-N nm 1310 nm 3.3 V 0 C to 70 C Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous

More information

155Mbps ATM-Multimode Transceiver

155Mbps ATM-Multimode Transceiver 1 9, D u p l e x SC/ ST Co n n e c t o r, 8 5 0 n m / V CSE L fo r M u l t i m o d e F i b e r RoHS Pb Applications Fast Ethernet FDDI ATM/SONET OC-3/SDH STM-1 Multimode fiber links Optical-Electrical

More information

Data Sheet. AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC connector. Description. Features.

Data Sheet. AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC connector. Description. Features. AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC connector Data Sheet Description The AFBR-59E4APZ is a new power saving Small Form Factor transceiver that gives the

More information

RoHS compliant 850 nm Multi-mode Transceiver Gigabit Interface Converter (GBIC), 3.3V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet.

RoHS compliant 850 nm Multi-mode Transceiver Gigabit Interface Converter (GBIC), 3.3V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet. Features Compliant with Gigabit Interface Converter Specification Compliant with IEEE802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard SCA-2 Host connector Duplex SC connector Differential

More information

Product Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR

Product Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR Product Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR PRODUCT FEATURES Up to OC-12/STM-4 bi-directional data links Standard 2x5 pin SFF footprint (MSA compliant)

More information

RoHS Compliant TX-1310/RX-1550 nm Single-mode Bi-directional 2

RoHS Compliant TX-1310/RX-1550 nm Single-mode Bi-directional 2 Features Compliant with IEEE 802.3z Gigabit Ethernet Industry standard 2 5 footprint SC connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with solder and aqueous wash

More information

VOLTAGE TEMPERATURE LD TYPE

VOLTAGE TEMPERATURE LD TYPE Features Compliant with IEEE 802.3z Gigabit Ethernet standard Industry standard 1 9 footprint SC connector Single power supply 3.3/5.0 V Differential PECL inputs and outputs Compatible with solder and

More information

PART NUMBER TX RX VOLTAGE TEMPERATURE. LSB2-A3M-PC-N nm 1310 nm 3.3 V 0 C to 70 C LSB2-A3M-PI-N nm 1310 nm 3.

PART NUMBER TX RX VOLTAGE TEMPERATURE. LSB2-A3M-PC-N nm 1310 nm 3.3 V 0 C to 70 C LSB2-A3M-PI-N nm 1310 nm 3. Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous

More information

Features. PART NUMBER TX RX IN/OUT SD Burst Control RX 1550nm Input TEMPERATURE LD TYPE

Features. PART NUMBER TX RX IN/OUT SD Burst Control RX 1550nm Input TEMPERATURE LD TYPE Features Compliant with IEEE 802.3ah 1000BASE-PX10 Industry standard 2 5 footprint SC connector Single power supply 3.3 V Differential LVPECL inputs and outputs Transmitter burst mode and Receiver continuous

More information

V23818-M305-B57 Multimode 850 nm and Gbit/s Fibre Channel 1.25 Gigabit Ethernet Transceiver with LC Connector

V23818-M305-B57 Multimode 850 nm and Gbit/s Fibre Channel 1.25 Gigabit Ethernet Transceiver with LC Connector Fiber Optics SFP - Small Form-factor Pluggable V23818-M305-B57 Multimode 850 nm 2.125 and 1.0625 Gbit/s Fibre Channel 1.25 Gigabit Ethernet Transceiver with LC Connector Features Small Form-factor Pluggable

More information

RoHS compliant 1310 nm Multi-mode Transceiver (2km) Small Form Pluggable (SFP), 3.3V 155 Mbps ATM/125 Mbps Fast Ethernet. Features.

RoHS compliant 1310 nm Multi-mode Transceiver (2km) Small Form Pluggable (SFP), 3.3V 155 Mbps ATM/125 Mbps Fast Ethernet. Features. Features RoHS compliant Compliant with Fast Ethernet standard Industry standard small form pluggable (SFP) package Duplex LC connector Differential LVPECL inputs and outputs Single power supply 3.3V TTL

More information

10Gbps XFP Optical Transceiver RTXM226-6XX

10Gbps XFP Optical Transceiver RTXM226-6XX The RTXM226-6XX is a hot pluggable 10Gbps small-form-factor transceiver module integrated with the high performance cooled DWDM EML transmitter and high sensitivity APD receiver.it is compliant to INF-8077i

More information

XFP Series JD1310-XFP-LC.S10. Features. Applications. Ordering information

XFP Series JD1310-XFP-LC.S10. Features. Applications. Ordering information JD1310-XFP-LC.S10 1310nm XFP single-mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS6 Compliant XFP Series Features Supports 9.95Gb/s to 11.3Gb/s bit rates Hot-pluggable XFP footprint Link length

More information

10Gbps 70KM CWDM XFP Optical Transceiver RTXM226-69X

10Gbps 70KM CWDM XFP Optical Transceiver RTXM226-69X The is a hot pluggable 10Gbps small-form-factor transceiver module integrated with the high performance cooled CWDM EML transmitter and high sensitivity APD receiver.it is compliant to INF-8077i XFP Multi-source

More information

ACE PLUS CORP. Features. Ordering Information

ACE PLUS CORP. Features. Ordering Information Features Compliant with IEEE 802.3ah 1000BASE-PX20-U Industry standard 2 5 footprint SC connector Single power supply 3.3 V Differential LVPECL inputs and outputs Transmitter burst mode and Receiver continuous

More information

DTR-xxx-3.3-SM-T. 3.3 Volt Single Mode Transceivers (1x9 pin-out) ! Single +3.3 V supply & LV-PECL data interface. ! Eye Safe (Class I Laser Safety)

DTR-xxx-3.3-SM-T. 3.3 Volt Single Mode Transceivers (1x9 pin-out) ! Single +3.3 V supply & LV-PECL data interface. ! Eye Safe (Class I Laser Safety) OCP Description DTR-xxx-3.3-SM-T 3.3 Volt Single Mode Transceivers (1x9 pin-out) The DTR-xxx-3.3-SM-T fiber optic transceivers are the 3.3V power supply versions of our standard DTR-xxx-SM fiber optic

More information

SNR-XFP-WXX-40 10Gbps

SNR-XFP-WXX-40 10Gbps Tx: 1270nm/Rx: 1330nm BIDI XFP Transceiver for 10GbE/10FC Tx: 1330nm/Rx: 1270nm BIDI XFP Transceiver for 10GbE/10FC RoHS 6 Compliant Features Supports 9.95Gb/s to 10.5Gb/s data rates Distance up to 40km

More information

I0AOM nm Single-mode Transceiver, (1000Base-LX) Small Form Pluggable (SFP), 3.3V Gbd Fiber Channel/1.25 Gigabit Ethernet.

I0AOM nm Single-mode Transceiver, (1000Base-LX) Small Form Pluggable (SFP), 3.3V Gbd Fiber Channel/1.25 Gigabit Ethernet. Features Compliant with IEEE802.3z Gigabit Ethernet Standard Compliant with Fiber Channel 100-SM-LC-L standard Industry standard small form pluggable (SFP) package Duplex LC connector Differential LVPECL

More information

RoHS Compliant 2x5 Small Form Factor Transceiver for Gigabit Ethernet

RoHS Compliant 2x5 Small Form Factor Transceiver for Gigabit Ethernet RoHS Compliant 2x5 Small Form Factor Transceiver for Gigabit Ethernet FEATURES Compliant with SFF transceiver MSA specification Compliant with specifications for IEEE 802.3z/Gigabit Ethernet compliant

More information

155Mbps Single-mode 1310nm, SFP Transceiver

155Mbps Single-mode 1310nm, SFP Transceiver AXSH-1324 155Mbps Single-mode 1310nm, SFP Transceiver Product Overview Features The AXSH-1324 family of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for the high performance

More information

Single Mode 1X9 Dual ST Transceiver 155MBs 5V. Applications Fiberoptic communications systems Networking Digital and Analog Signal transmission

Single Mode 1X9 Dual ST Transceiver 155MBs 5V. Applications Fiberoptic communications systems Networking Digital and Analog Signal transmission PD-. offers singlemode laser based fiber optic transceiver modules in convenient industry standard 1X9 style packages. The PTRX series modules are designed to comply with SONET/SDH standards for 155MBs

More information

Single-mode 155Mbps 2X10 SFF Transceiver

Single-mode 155Mbps 2X10 SFF Transceiver Features LC duplex receptacle Standard 2 x 10 footprint 1310nm or 1550nm laser transmitter with automatic power control Laser bias and power monitor AC or DC coupled LPECL/PECL compatible data input and

More information

10Gbps XFP Optical Transceiver

10Gbps XFP Optical Transceiver 10Gbps XFP Optical Transceiver RTXM226-405 Features Compliant with XFP MSA Data Rate from 9.95 Gbps to 11.3Gbps 1310nm DFB TOSA and PIN ROSA Industry-standard,protocol-indep endent,xfi interface Transmission

More information

SPM-3102WG / SPM-3102BWG / SPM-3102AWG (RoHS Compliant) 3.3V / 1310 nm / 125 Mbps Digital Diagnostic LC SFP MULTI-MODE TRANSCEIVER

SPM-3102WG / SPM-3102BWG / SPM-3102AWG (RoHS Compliant) 3.3V / 1310 nm / 125 Mbps Digital Diagnostic LC SFP MULTI-MODE TRANSCEIVER / SPM-3102BWG / SPM-3102AWG (RoHS Compliant) 3.3V / 1310 nm / 125 Mbps Digital Diagnostic LC SFP MULTI-MODE TRANSCEIVER **********************************************************************************************************************************************************************

More information

155Mbps 1x9 SC/ST Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3

155Mbps 1x9 SC/ST Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3 155Mbps 1x9 SC/ST Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3 Features OPT-155Axxxx Full Compliance with the Optical Performance Requirements of the ATM 100Mbps and 100

More information

SPB-3680LWG / SPB-3680BLWG / SPB-3680ALWG 1310 nm TX / 1550 nm RX, 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

SPB-3680LWG / SPB-3680BLWG / SPB-3680ALWG 1310 nm TX / 1550 nm RX, 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver ** / SPB-3680BWG / SPB-3680AWG SPB-3680LWG / SPB-3680BLWG / SPB-3680ALWG (SC BIDI SFP) (RoHS Compliant) (LC BIDI SFP) 1310 nm TX / 1550 nm RX, 3.3V / 155 Mbps Digital Diagnostic Single-Fiber SFP Transceiver

More information

1300nm Fast Ethernet Transceiverin1x9SC Duplex Package

1300nm Fast Ethernet Transceiverin1x9SC Duplex Package 1300nm Fast Ethernet Transceiverin1x9SC Duplex Package OPF5102 Technical Data Features 1310nm LED Data Rate: 155Mbps, NRZ Single +3.3V Power Supply PECL Differential Electrical Interface Industry Standard

More information

PART NUMBER INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURE

PART NUMBER INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURE Features RoHS compliant Compliant with SONET/SDH standard Compliant with Fast Ethernet standard Compliant with SFF8472 diagnostic monitoring interface Industry standard small form pluggable (SFP) package

More information

PART NUMBER WAVELENGTH INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURE

PART NUMBER WAVELENGTH INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURE Features RoHS compliant Compliant with SONET/SDH standard Compliant with Fast Ethernet standard Industry standard small form pluggable (SFP) package Duplex LC connector Differential LVPECL inputs and outputs

More information

AFBR-59E4APZ-HT. Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC Connector. Data Sheet. Features. Description.

AFBR-59E4APZ-HT. Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC Connector. Data Sheet. Features. Description. Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC Connector Description The AFBR-59E4APZ-HT is a new power saving Small Form Factor transceiver that gives the system designer a product

More information

PART NUMBER INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURE

PART NUMBER INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURE Features Compliant with IEEE802.3z Gigabit Ethernet Standard Compliant with SFF8472 diagnostic monitoring interface Duplex LC connector Differential LVPECL inputs and outputs Single power supply 3.3V TTL

More information

XFP BIDI Series JB1330-XFP-LC.S60. Features. Applications. Ordering information. Regulatory Compliance

XFP BIDI Series JB1330-XFP-LC.S60. Features. Applications. Ordering information. Regulatory Compliance JB1330-XFP-LC.S60 XFP BIDI Series Tx: 1330nm/Rx: 1270nm BIDI XFP Transceiver for 10GbE/10FC RoHS 6 Compliant Features Supports 9.95Gb/s to 10.5Gb/s data rates Power budget 21dB at least 1330nm DFB Transmitter/

More information

10Gbps XFP Optical Transceiver RTXM

10Gbps XFP Optical Transceiver RTXM The is a hot pluggable 10Gbps small-form-factor transceiver module integrated with the high performance un-cooled 1310nm DFB laser and high sensitivity PIN receiver.it is compliant to INF-8077i XFP Multi-source

More information

RoHS compliant 1550 nm Single-mode Transceiver, 24dB margin Small Form Pluggable (SFP), 3.3V Gbd Fiber Channel/1.25 Gigabit Ethernet.

RoHS compliant 1550 nm Single-mode Transceiver, 24dB margin Small Form Pluggable (SFP), 3.3V Gbd Fiber Channel/1.25 Gigabit Ethernet. Features Compliant with IEEE802.3z Gigabit Ethernet Standard Compliant with Fiber Channel 100-SM-LL-L standard Industry standard small form pluggable (SFP) package Duplex LC connector Differential PECL

More information

Multi-mode 155Mbps Bi-Directional Single Fiber 2x5 SFF Optical Transceiver

Multi-mode 155Mbps Bi-Directional Single Fiber 2x5 SFF Optical Transceiver Features Industrial standard 2 x 5 pin footprint Single SC/ST/FC connector interface Receptacle only with SC Receiver signal detect function Wide dynamic rang receiver with AGC PECL/LPECL logic interface,

More information

Note1: Standard version, the distance is measured under Lab condition. For other ordering information in detail, please contact EOPTOLINK..

Note1: Standard version, the distance is measured under Lab condition. For other ordering information in detail, please contact EOPTOLINK.. EOLF-1303-A Series Single Mode transceiver for 1310nm 100M~155M SDH/SONET Duplex SFF Transceiver RoHS6 Compliant Features Duplex LC Single-Mode Transceiver Operating Data Rate up to 155Mbps 100km with

More information

155Mbps ATM-Single Mode Transceiver

155Mbps ATM-Single Mode Transceiver Mbps ATM-Single Mode Transceiver x SFF, Duplex LC Connector, FP for Single Mode Fiber, RoHS Compliant Features Applications Fast Ethernet FDDI ATM/SONET OC-/H STM- Single mode fiber links Optical-Electrical

More information

XFP-10GB-LR. 10Gbps XFP Optical Transceiver, 10km Reach

XFP-10GB-LR. 10Gbps XFP Optical Transceiver, 10km Reach XFP-10GB-LR 10Gbps XFP Optical Transceiver, 10km Reach Features Supports 9.95Gb/s to 11.3Gb/s Bit Rates Hot-pluggable XFP Footprint Maximum Link Length up to 10km 1310nm DFB laser and PIN photodiode Duplex

More information

850 nm VCSEL Laser for Multimode Fiber at 1.25 GBaud

850 nm VCSEL Laser for Multimode Fiber at 1.25 GBaud ORDERING INFORMATION MDX- 19-4 - 1 - T - XL 3.3 V POWER SUPPLY GROUND CLIP Blank - Clip Back F - Clip Forward SIGNAL DETECT T - TTL Output WAVELENGTH 1-850 nm (multimode) 2-1300 nm (single mode) 5 km 2M

More information

Features. Application

Features. Application Features Compliant with Fiber Channel 100-M5-SN-I and 100-M6-SN-I standard Compliant with IEEE802.3z Gigabit Ethernet standard SONET OC12/SDH STM-4 application Industry standard small form pluggable (SFP)

More information

Regulatory Compliance Electrostatic Discharge (ESD) to the Electrical Pins Electrostatic Discharge to the enclosure Electromagnetic Interference (EMI)

Regulatory Compliance Electrostatic Discharge (ESD) to the Electrical Pins Electrostatic Discharge to the enclosure Electromagnetic Interference (EMI) ST-SFP-4GE-S04 Series Single-Mode 1310nm for FC/2FC/4FC Duplex SFP Transceiver Features Operating Data Rate up to 4.25Gbps 1310nm FP Laser Transmitter 4Km with 9/125 μm SMF Single 3.3V Power Supply and

More information

SPB-9640G / SPB-9640BG / SPB-9640AG (SC BIDI SFP)

SPB-9640G / SPB-9640BG / SPB-9640AG (SC BIDI SFP) ** / SPB-9640BG / SPB-9640AG (SC BIDI SFP) (RoHS Compliant) SPB-9640LG / SPB-9640BLG / SPB-9640ALG (LC BIDI SFP) 1310 nm TX / 1550 nm RX, 3.3V / 2.5 Gbps Single-Fiber SFP Transceiver * FEATURES 1-Fiber

More information

GLC-GE-100FX-LEG. 155Mbps SFP Transceiver

GLC-GE-100FX-LEG. 155Mbps SFP Transceiver 39500 GLC-GE-100FX-LEG CISCO 100BASE-FX SFP MMF 1310NM 2KM REACH LC DOM GLC-GE-100FX-LEG 155Mbps SFP Transceiver Features Operating Data Rate up to 155Mbps 1310 FP Laser transmitter 2km with 50/125 μm

More information

Singlemode 1.25Gbps Bi-Directional Single Fiber Optical Transceiver

Singlemode 1.25Gbps Bi-Directional Single Fiber Optical Transceiver Features 1310nm/1550nm operating wavelength Industrial standard 1 x 9 pin footprint Receiver signal detect function Wide dynamic rang receiver with AGC PECL/LPECL logic interface, DC or AC coupling Single

More information

10Gb/s 10Km CDR SFP+ 1310nm Transceivers

10Gb/s 10Km CDR SFP+ 1310nm Transceivers Features l Compliant to SFP+ MSA l Fully RoHS Compliant l All metal housing for superior EMI performance l IPF compliant mechanics (SFF-8432 Rev 5.0) l CDR with 9.95 to 11.3Gbps l Uncooled DML DFB Laser

More information

Wavelength (nm) Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg

Wavelength (nm) Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg / SPS-160BWG / SPS-160AWG (RoHS Compliant).V / 10 nm / 1 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER **********************************************************************************************************************************************************************

More information

PT (2)-1W. OC-3 SR/IR-1 / STM S-1.1 SFP Transceiver

PT (2)-1W. OC-3 SR/IR-1 / STM S-1.1 SFP Transceiver www.neophotonics.com VER A/ 102307 PT7320-31(2)-1W 1 Features 1.1 Transceiver unit with independent 1310nm MQW FP Laser diode transmitter InGaAs PIN photodiode receiver 1.2 Compliant with SFP MSA and SFF-8472

More information

AXGE Gbps Single Fiber Bi-directional, 1x9, SC Receptacle, OLT Transceiver

AXGE Gbps Single Fiber Bi-directional, 1x9, SC Receptacle, OLT Transceiver AXGE-3751 1.25Gbps Single Fiber Bi-directional, 1x9, SC Receptacle, OLT Transceiver Product Overview The AXGE-3751 family of 1x9 transceiver modules is specifically designed for the high performance integrated

More information

3.3V / 1550 nm / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

3.3V / 1550 nm / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER / SPS-00BWG / SPS-00AWG (RoHS Compliant).V / 10 nm / 6 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER FEATURES Hot-Pluggable SFP Footprint LC Optical Transceiver Small Form-Factor Pluggable (SFP)

More information

Data Sheet. Description. Features. Transmitter. Applications. Receiver. Package

Data Sheet. Description. Features. Transmitter. Applications. Receiver. Package AFBR-59F1Z 125MBd Compact 650 nm Transceiver for Data Communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F1Z transceiver

More information

155Mbps ATM-Single Mode Transceiver

155Mbps ATM-Single Mode Transceiver , D u p l e x S C / S T / F C C o n n e c t o r, 5 5 0 n m D F B L D fo r S i n g l e M o d e F i b e r Extended Operating Temperature from 4 0 to + 5, R oh S C ompl iant RoHS Pb Applications Fast Ethernet

More information

Product Specification OC-48 SR-1/STM S-16 Multirate 2x10 SFF Transceiver FTLF1321S1xTL

Product Specification OC-48 SR-1/STM S-16 Multirate 2x10 SFF Transceiver FTLF1321S1xTL Product Specification OC-48 SR-1/STM S-16 Multirate 2x10 SFF Transceiver FTLF1321S1xTL PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Standard 2x10 pin SFF footprint (MSA compliant) Analog diagnostics

More information

SFP-ZX-SM Gbps SFP Optical Transceiver, 80km Reach

SFP-ZX-SM Gbps SFP Optical Transceiver, 80km Reach SFP-ZX-SM-0280 1.25Gbps SFP Optical Transceiver, 80km Reach Features Dual data-rate of 1.25Gbps/1.063Gbps operation 1550nm DFB laser and PIN photodetector for 80km transmission Compliant with SFP MSA and

More information

XFP-BIDI-xx-10D. 10Gbps XFP Bi-Directional Transceiver, 10km Reach

XFP-BIDI-xx-10D. 10Gbps XFP Bi-Directional Transceiver, 10km Reach XFP-BIDI-xx-10D 10Gbps XFP Bi-Directional Transceiver, 10km Reach Features Supports 9.95Gb/s to 10.5Gb/s data rates Power budget 9dB at least Two types: 1270nm DFB Transmitter/ 1330nm Receiver 1330nm DFB

More information

PRODUCT FEATURES APPLICATIONS. Pin Assignment: 1 Gigabit Long-Wavelength SFP Transceiver SFP-SX-MM

PRODUCT FEATURES APPLICATIONS. Pin Assignment: 1 Gigabit Long-Wavelength SFP Transceiver SFP-SX-MM 1 Gigabit Long-Wavelength SFP Transceiver SFP-SX-MM PRODUCT FEATURES Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions 850nm VCSEL laser transmitter

More information

AFBR-59E4APZ-LH. Multimode Small Form-Factor (SFF) Transceiver for Fast Ethernet, with LC Connector. Data Sheet. Features. Description.

AFBR-59E4APZ-LH. Multimode Small Form-Factor (SFF) Transceiver for Fast Ethernet, with LC Connector. Data Sheet. Features. Description. Multimode Small Form-Factor (SFF) Transceiver for Fast Ethernet, with LC Connector Description The AFBR-59E4APZ-LH is a new power saving Small Form-Factor transceiver that gives the system designer a product

More information

Product Specification OC-48 IR-1/STM S-16.1 Multirate 2x10 SFF Transceiver FTLF1421S1xCL

Product Specification OC-48 IR-1/STM S-16.1 Multirate 2x10 SFF Transceiver FTLF1421S1xCL Product Specification OC-48 IR-1/STM S-16.1 Multirate 2x10 SFF Transceiver FTLF1421S1xCL PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Standard 2x10 pin SFF footprint (MSA compliant) Analog

More information

2 Mb/s IEEE C37.94 Multi-Mode Transceiver

2 Mb/s IEEE C37.94 Multi-Mode Transceiver SFP, Duplex LC Connector, 850 nm VCSEL for Multi-mode Fiber, RoHS Compliant Digital Diagnostics Functions, Extended Operating Temperature from 40 to +85 C Features RoHS Pb Applications IEEE C37.94 / IEC

More information

RoHS Compliant Small Form Factor Pluggable Transceiver for Gigabit Ethernet and Fiber Channel

RoHS Compliant Small Form Factor Pluggable Transceiver for Gigabit Ethernet and Fiber Channel RoHS Compliant Small Form Factor Pluggable Transceiver for Gigabit Ethernet and Fiber Channel FEATURES Compliant with SFP Transceiver MSA specification Compliant with Specifications for IEEE 802.3z/Gigabit

More information

GLC-LH-SM-TX. Product Features. Applications. General. Cisco Compatible 1000BASE-LX/LH SFP TurboX

GLC-LH-SM-TX. Product Features. Applications. General. Cisco Compatible 1000BASE-LX/LH SFP TurboX Product Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 1310nm FP laser transmitter RoHS compliant and Lead Free Up to 10km on 9/125um SMF Metal enclosure for lower EMI

More information

AFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package

AFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package AFBR-59F2Z 2MBd Compact 6nm Transceiver for Data communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F2Z transceiver

More information

JD061A-C. 1.25Gbps SFP Transceiver

JD061A-C. 1.25Gbps SFP Transceiver JD061A-C HP 1000Base-EX SFP SMF 1310nm, 40km Reach, LC JD061A-C 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 1310nm FP Laser transmitter RoHS

More information

AXFT Mbps~155Mbps Single Fiber Bi-directional SFP, ONU Transceiver

AXFT Mbps~155Mbps Single Fiber Bi-directional SFP, ONU Transceiver AXFT-1624 125Mbps~155Mbps Single Fiber Bi-directional SFP, ONU Transceiver Product Overview The AXFT-1624 is specifically designed for the high performance integrated duplex data link over a single optical

More information

ROHS Compliant MM SFP Transceiver 1.25Gb Gigabit Ethernet

ROHS Compliant MM SFP Transceiver 1.25Gb Gigabit Ethernet Product Overview WFT s SFP transceiver modules is specifically designed for the high performance and cost-effectiveness integrated duplex data link over a single fiber. The high-speed laser diode and photo

More information

Features: Compliance: Applications. Warranty: NTTP03CF-GT OC-48/STM-16 IR1/S nm XCT Enhanced SFP Module Nortel Compatible

Features: Compliance: Applications. Warranty: NTTP03CF-GT OC-48/STM-16 IR1/S nm XCT Enhanced SFP Module Nortel Compatible The GigaTech Products is programmed to be fully compatible and functional with all intended AVAYA / NORTEL OPTERA switching devices. This SFP optical transceiver is based on the ATM/SONET/SONET standard

More information

SFP+ Series. 1550nm SFP+ single-mode Transceiver, With Diagnostic Monitoring Duplex SFP+ Transceiver RoHS 6 Compliant

SFP+ Series. 1550nm SFP+ single-mode Transceiver, With Diagnostic Monitoring Duplex SFP+ Transceiver RoHS 6 Compliant JD1550-SFP-LC.S80 SFP+ Series 1550nm SFP+ single-mode Transceiver, With Diagnostic Monitoring Duplex SFP+ Transceiver RoHS 6 Compliant Features 1550nm cooled EML High sensitivity APD Receiver Distance

More information

AFBR-59E4APZ. Data Sheet. Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet and FDDI, with LC Connector. Description.

AFBR-59E4APZ. Data Sheet. Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet and FDDI, with LC Connector. Description. Data Sheet AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet and FDDI, with LC Connector Description The AFBR-59E4APZ is a new power saving Small Form Factor transceiver that

More information

SFP Dual LC 1.25G SMF 20Km 1310nm Transceiver. Features. Applications. Ordering Information APPLIED OPTOELECTRONICS, INC.

SFP Dual LC 1.25G SMF 20Km 1310nm Transceiver. Features. Applications. Ordering Information APPLIED OPTOELECTRONICS, INC. Features Applications Gigabit Ethernet (1.25Gbps) Fiber Channel 1xFC (1.0625Gbps) SFP Type Dual LC Transceiver 1310nm FP Laser PIN Photo Detector 20Km transmission with SMF 3.3V single power supply Compliant

More information

G-PON ONU Small Form-Factor Transceiver

G-PON ONU Small Form-Factor Transceiver G-PON ONU Small Form-Factor Transceiver GPN Features Compliant with ITU-T G.984.2 Class B+ Tx 1310 nm/rx 1490 nm 2X5 pins Small Form Factor style package/smf Pigtail with SC/APC Connector Wave Solderable

More information