Price list 2018 Devices

Transcription

1 Price list 2018 Devices

2 Product range Chapter Chapter name System overview Page 1 1 Heat cost allocator - Q caloric New installation - Standard exchange - Conversion installation (P2 + AL2) New installation - Standard exchange - Conversion installation (P3 + AL2) Article-Number-Matrix 8 2 Compact heat meters - Q heat Screw-type meters (QDS) Screw-type meters (QDS) incl. radio add-on modul Screw-type meters (QDS) - integrated communication M-Bus Measuring capsule (IST) Measuring capsule (IST) incl. radio add-on modul Screw-type meters (US) - ultrasonic Screw-type meters (US) - ultrasonic incl. radio add-on modul Article-Number-Matrix 18 3 Split heat meters - Q heat split Split heat meters complete - Ultrasonic flow sensors (thread) Split heat meters complete - Ultrasonic flow sensors (flange) Split heat meters complete - Woltman flow sensors (flange) Article-Number-Matrix Split heat meters Calculator units 27 4 Water meters - Q water Electronic screw-type water meters Mechanical screw-type water meters incl. radio add-on modul Mechanical screw-type water meters Electronic measuring capsule water meters Mechanical measuring capsule water meters incl. radio add-on modul Mechanical measuring capsule water meters Electronic valve and bath meters 44 5 Smoke detector - Q smoke Smoke detector standalone Smoke detector radio 49 6 Further system components data readout Q walk-by / Q AMR Radio add-on modules for mechnical water meters Radio add-on modules for heat meters Radio impulse adapter 55 subject to error and change, previous price lists lose their validity

3 Product range Chapter Chapter name Page 7 Further system components data readout Q AMR Networknodes Gateways Overview of tariffs Gateway Service Description (GSD) Solution package for small Q AMR systems 57 8 Further system components data readout Q M-Bus Add-on modules for water meters Add-on modules for heat meters Impulse input module 60 9 General terms and conditions General terms and conditions 61 subject to error and change, previous price lists lose their validity

4 Our systems. Ideal for every property. AMR walk-by M-Bus Q AMR provides automated meter reading for buildings of all sizes. The values are transmitted securely and reliably to the service provider using a GSM phone network or broadband cable. The data is available immediately for the invoicing of heating and operating costs as well as the display of statistics for the housing industry and consumption patterns. Q walk-by operates without the need to enter flats or offices. Instead the meter reading service receives the data simply, fast and securely in the publicly accessible areas of the building. Where installations are not too extensive the data can even be recorded from outside the building. Q M-Bus is based on the European meter bus industrial standard. The main features of this wired remote data reading system are a high level of flexibility and secure data transmission. It is especially recommended for use in buildings where the wireless transmission of data is less suitable because of the design of the building opto basic All devices in the Q opto series have a close-range optical interface (IrDA). With the IrDA interface the data exchange is implemented across short distances by infrared light. Q opto enables the reader to compare current consumption values with the previous year s data. Q basic covers devices which are read individually and directly by visual contact. The measuring results are recorded manually by the reader. Comparison transmission features S-Mode (mode switch possible with Q suite 5) parallel transmission of telegrams Q walk-by Q AMR every 128 seconds every 4 hours 10 hours a day ( hrs) 24 hours a day monthly: 4 read-out days from the 1st of each month 7 days a week or: 48 days after the scheduled day 365 days a year delayed transmission possible (offset) transmission-free days possible read-out requirements: Q log current ACT46 Q node 5 + Q gateway 5 C-Mode (mode switch possible with Q suite 5) parallel transmission of telegrams Q walk-by Q AMR enhanced transmission performance enhanced transmission performance (max. 10 dbm) (max. 10 dbm) every 112 seconds every 7,5 minutes 10 hours a day ( hrs) 24 hours a day 365 days a year 365 days a year read-out requirements: Q log current ACT46 Q node 5.5 (a. Q3/2018) + Q gateway 5 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT page 1

5 1 Heat cost allocators Electronic heat cost allocators are radiator-mounted devices capable of measuring its heat output and storing the data acquired. A distinction is made between one-sensor and two-sensor heat cost allocators. One-sensor devices record the radiator temperature and assume a fixed room temperature for consumption calculation. In contrast, two-sensor devices record both the radiator and the room temperatures. Both device types can be used with standard heating systems, with low-temperature heating systems twosensor devices are mandatory or more suitable. Both device types can display and/or store different values, e.g. the cumulated value at a selectable due date or end-of-the-month values and a fault message in case of an error. There are different systems: Q basic is readout visually and noted manually. With Q opto, the devices have an integrated IrDA interface and are readout with a respective device directly at the radiator. Then there are the devices and systems that are readout via radio. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 1, page 3

6 1 Heat cost allocators 1.1 Q caloric 5.5 (P2 + AL2) The heat cost allocators listed below are for installation in new systems (no attachment parts available on the radiator), for standard exchange in systems with existing QUNDIS devices Q caloric 5, 201 and 202 (attachment parts available on the radiator) and for conversion installation in systems with external brands e.g. evaporator (attachment parts partly available). New installation: suitable installation plate has to be ordered Conversion installation: suitable installation plate has to be ordered Standard exchange: installation plate available EN 834-conform one-sensor or two-sensor heat cost allocator, storing of annual values with checksum, electromechanical contact for detecting device opening (e.g. in the case of manipulation), programmable due date and seal already pre-mounted in the housing, for average temperatures ranges from 55 C or 35 C to 110 C, prepared for the installation of a remote sensor, retrofitting can be done at any time on site. Standard version: Due date , battery warning off / opening detection in plain text / no summer switch-off - yet prepared, urther parameter setting options are possible on request or can be activated directly on site / can be changed using software Q suite Please note the instructions concerning approval of mixed operation. Please contact us if you have any questions. Communication: Q basic (no interface) Metering technology compatible with Q caloric 5, 201S and 202S/K, mixed operation is permitted! 1-sensor measuring principle K = 26, DD = C 1 HCA A1A ,00 2-sensor measuring principle K = 60, DD = C 1 HCA B3C ,55 Communication: Q opto (IrDA-interface) Metering technology compatible with Q caloric 5, 201S and 202S/K, mixed operation is permitted! 1-sensor measuring principle K = 26, DD = E 1 HCA A1A ,20 2-sensor measuring principle K = 60, DD = E 1 HCA B3C ,75 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 1, page 4

7 1 Heat cost allocators 1.1 Q caloric 5.5 (P2 + AL2) Communication: Radio / S-mode und - S-Mode features see page 1 - switch from S to C mode possible - re-parameterisation from 2-sensor to 1-sensor device possible Radio transmission compatible with Q caloric 5, mixed operation possible! Radio technology NOT compatible with 202R, mixed operation NOT possible! 2-sensor measuring principle K = 60, DD = F 1 HCA B3C ,05 2-sensor measuring principle + IrDA K = 60, DD = F 1 HCA5-000N-B3C ,25 Further Q caloric parameterising variants available on request. See also matrix on page 8. Communication: Radio / C-mode und - C-Mode features see page 1 - switch from C to S mode possible - re-parameterisation from 2-sensor to 1-sensor device possible Radio transmission not compatible in C-Mode with Q caloric 5 for AMR installations, Mixed operations possible with walk-by operations (read-out requirements: Q log current ACT46)! 2-sensor measuring principle K = 60, DD = F 1 HCA B3C ,05 2-sensor measuring principle + IrDA K = 60, DD = F 1 HCA5-000T-B3C ,25 Further Q caloric parameterising variants available on request. See also matrix on page 8. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 1, page 5

8 1 Heat cost allocators 1.2 Q caloric 5.5 (P3 + AL2) The heat cost allocators listed below are for installation in new systems (no attachment parts available on the radiator), for standard exchange in systems with existing QUNDIS devices Q caloric 5, WHE2, WHE3 and WHE4 (attachment parts available on the radiator) and for conversion installation in systems with external brands e.g. evaporator (attachment parts partly available). New installation: suitable installation plate has to be ordered Conversion installation: suitable installation plate has to be ordered Standard exchange: installation plate available EN 834-conform one-sensor or two-sensor heat cost allocator, storing of annual values with checksum, electromechanical contact for detecting device opening (e.g. in the case of manipulation), programmable due date and seal already pre-mounted in the housing, for average temperatures ranges from 55 C or 35 C to 110 C, prepared for the installation of a remote sensor, retrofitting can be done at any time on site. Standard version: Due date , battery warning off / opening detection in plain text / no summer switch-off - yet prepared, urther parameter setting options are possible on request or can be activated directly on site / can be changed using software Q suite 5 Please note the instructions concerning approval of mixed operation. Please contact us if you have any questions. Communication: Q basic (no interface) Metering technology compatible with Q caloric 5, mixed operation is permitted! Metering technology NOT compatible with WHE3, mixed operation is NOT permitted! 1-sensor measuring principle K = 26, ST = C 1 HCA A1A ,00 2-sensor measuring principle K = 60, ST = C 1 HCA B3C ,55 Communication: Q opto (IrDA-interface) Metering technology compatible with Q caloric 5, mixed operation is permitted! Metering technology NOT compatible with WHE3, mixed operation is NOT permitted! 1-sensor measuring principle K = 26, ST = E 1 HCA A1A ,20 2-sensor measuring principle K = 60, ST = E 1 HCA B3C ,75 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 1, page 6

9 1 Heat cost allocators 1.2 Q caloric 5.5 (P3 + AL2) Communication: Radio / S-mode und - S-Mode features see page 1 - switch from S to C mode possible - re-parameterisation from 2-sensor to 1-sensor device possible Radio transmission compatible with Q caloric 5, mixed operation possible! Metering technology NOT compatible with WHE4, mixed operation NOT possible! 2-sensor measuring principle K = 60, ST = F 1 HCA B3C ,05 2-sensor measuring principle + IrDA K = 60, ST = F 1 HCA5-003N-B3C ,25 Further Q caloric parameterising variants available on request. See also matrix on page 8. Communication: Radio / C-mode und - C-Mode features see page 1 - switch from C to S mode possible - re-parameterisation from 2-sensor to 1-sensor device possible Radio transmission not compatible in C-Mode with Q caloric 5 for AMR installations, Mixed operations possible with walk-by operations (read-out requirements: Q log current ACT46)! Metering technology NOT compatible with WHE4, mixed operation is NOT permitted! 2-sensor measuring principle K = 60, ST = F 1 HCA B3C ,05 2-sensor measuring principle + IrDA K = 60, ST = F 1 HCA5-003T-B3C ,25 Further Q caloric parameterising variants available on request. See also matrix on page 8. Other products for NEW INSTALLATION - STANDARD REPLACEMENT - REPAIR - CONVERSION (P3) Further product variants for Q caloric 5.5 new installation or for systems with existing devices / attachment parts of the series Q caloric 5 (P3), WHE3 and WHE4 with AL3 or AL4 can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 1, page 7

10 1 Heat cost allocators 1.3 Q caloric part number matrix Product family Block1 Block2 Block3 Block4 Basic Price Heat Cost Allocator Q caloric 5.5 HCA5 x x x x x x x x x x x x x 22,00 Logo Block1 Block2 Block3 Block4 Extra charge QUNDIS (standard) HCA5 0 0 x x x x x x x x x x x - Housing version Block1 Block2 Block3 Block4 Extra charge P2 (201/202 compatible) HCA5 x x 0 x x x x x x x x x x - P3 (WHE3 / WHE4 compatible) HCA5 x x 3 x x x x x x x x x x - Communication interface Block1 Block2 Block3 Block4 Extra charge none H C A 5 x x x 2 x x x x x x x x x - IrDA H C A 5 x x x 5 x x x x x x x x x 6,20 walk-by + AMR (S-mode) H C A 5 x x x 6 x x x x x x x x x 30,50 walk-by + AMR (C-mode) H C A 5 x x x 8 x x x x x x x x x 30,50 IrDA + walk-by + AMR (S-mode) H C A 5 x x x N x x x x x x x x x 36,70 IrDA + walk-by + AMR (C-mode) H C A 5 x x x T x x x x x x x x x 36,70 Measuring / calculation algorithm + Metering system Block1 Block2 Block3 Block4 Extra charge AL2-1-sensor - prepared for summer switch-off (only basic + IrDA) H C A 5 x x x x A x x x x x x x x - AL2-2-sensor - prepared for summer switch-off HCA5 xxxx B xxx xxxxx 1,55 AL3-2-sensor - prepared for summer switch-off HCA5 xxxx C xxx xxxxx 1,55 AL4-2-sensor - prepared for summer switch-off HCA5 xxxx D xxx xxxxx 1,55 AL3/4-1-sensor - prepared for summer switch-off (only basic + IrDA) H C A 5 x x x x E x x x x x x x x - K-level Block1 Block2 Block3 Block4 Extra charge none H C A 5 x x x x x 0 0 x x x x x x - 26 (standard for 1-sensor) H C A 5 x x x x x 1Ax x x x x x - 60 (standard for 2-sensor) H C A 5 x x x x x 3Cx x x x x x H C A 5 x x x x x X3x x x x x x - Approval Block1 Block2 Block3 Block4 Extra charge EN 834 H C A 5 x x x x x x x 0 x x x x x - France H C A 5 x x x x x x x 1 x x x x x - Denmark H C A 5 x x x x x x x 2 x x x x x - Russia H C A 5 x x x x x x x 3 x x x x x - Due date Block1 Block2 Block3 Block4 Extra charge standard H C A 5 x x x x x x x x 0 x x x x - more on request Special options Block1 Block2 Block3 Block4 Extra charge none (standard) H C A 5 x x x x x x x x x 0 x x x - Summer month beginning Block1 Block2 Block3 Block4 Extra charge none H C A 5 x x x x x x x x x x 0 x x - more on request Summer month end Block1 Block2 Block3 Block4 Extra charge none H C A 5 x x x x x x x x x x x 0 x - more on request Special options Block1 Block2 Block3 Block4 Extra charge none H C A 5 x x x x x x x x x x x x 0 - more on request Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 1, page 8

11 2 Compact heat meters Heat meters are devices which are mounted in a water cycle, can measure its heat output and save the data recorded. A distinction is made between heat meters and combined heat/cold meters. Heat meters record temperatures in the water circuit s supply and return flow as well as the volume flow rate, and assume a pure heat output of the pipe system (heating operation) for the consumption calculation. In contrast, combined heat/cold meters record both the heat output and the heat input of the pipe system (cooling operation). The data of both operating modes are managed in separate memoriesboth device types can display and/or store different values, e.g. the cumulated values at a selectable due date or end-of-the-month values and a fault message in case of an error. Meters without integrated communication can be retrofitted with communication add-on modules an integrated into the Q AMR, Q walk-by or Q M-Bus system. Module variants can be found from chapter 6 onwards. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 9

12 2 Compact heat meters 2.1 Q heat 5 - Screw-type meters (QDS) The heat meters listed below have been designed for installation in systems where an installation section is available with the dimensions listed next to the meter, and the meter is screwed to the pipework system by means of two union nuts. All suitable meters are marked with "QDS". MID-conform compact heat meter with integrated IrDA interface, inductive scanning process, current value as well as annual value and monthly values with checksum, detection of direction of rotation, programmable due date as well as display and storage of the maximum values, prepared for installation of external communication modules for integration in a Q walk-by, Q AMR or Q M-Bus system (see chapter 6 onwards), retrofitting on site is possible at any time, Parameter setting via the operating keys or the software Q suite 5 - Measuring cycle: 36 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication: Q opto (IrDA-interface) Nominal flow 0.6 m³/h, temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 3/4" x 110 mm 5H 1 HMC ,00 Calculator unit removable G 3/4" x 110 mm 5I 1 HMR ,00 Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 3/4" x 110 mm 5H 1 HMC ,00 Calculator unit removable G 3/4" x 110 mm 5I 1 HMR ,00 Nominal flow 2.5 m³/h, temperature sensor 5.0 x 45 mmfor direct or immersion sleeve measurement Calculator unit cannot be removed G 1" x 130 mm 5H 1 HMC ,00 Calculator unit removable G 1" x 130 mm 5I 1 HMR ,00 Nominal flow 0.6 m³/h, temperature sensor 5.2 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 3/4" x 110 mm 5H 1 HMC ,00 Calculator unit removable G 3/4" x 110 mm 5I 1 HMR ,00 Nominal flow 1.5 m³/h, temperature sensor 5.2 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 3/4" x 110 mm 5H 1 HMC ,00 Calculator unit removable G 3/4" x 110 mm 5I 1 HMR ,00 Nominal flow 2.5 m³/h, temperature sensor 5.2 x 45 mmfor direct or immersion sleeve measurement Calculator unit cannot be removed G 1" x 130 mm 5H 1 HMC ,00 Calculator unit removable G 1" x 130 mm 5I 1 HMR ,00 Note: Article numbers cover English language version and 10-year battery. Further Q heat parameterising variants available on request. See also matrix on page 18. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 10

13 2 Compact heat meters 2.2 Q heat 5 - Screw-type meters (QDS) incl. Q module 5.5 MID-conform compact heat meter - With mounted, sealed and parameterised radio add-on module - For integration into the Q AMR or Q walk-by system - Measuring cycle: 36 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years Please note! Excluded from calibration (formerly re-calibration) and buyback. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication: Radio / S-mode und - S-Mode features see page 1 - Radio transmission compatible with heat meters incl.wfz166.ox / WFZ16.Ox, mixed operation possible! Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5I 1 HMR5-000N A 335,00 Nominal flow 1.5 m³/h, temperature sensor 5.2 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5I 1 HMR5-000N A 335,00 Communication: Radio / C-mode und - C-Mode features see page 1 - Radio transmission (walk-by) compatible with WFZ166.Ox, mixed operation possible! Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5I 1 HMR5-000T A 335,00 Nominal flow 1.5 m³/h, temperature sensor 5.2 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5I 1 HMR5-000T A 335,00 Note: Article numbers cover English language version and 10-year battery. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 11

14 2 Compact heat meters 2.3 Q heat 5 - Screw-type meters (QDS) - integrated communication The heat meters listed below have been designed for installation in systems where an installation section is available with the dimensions listed next to the meter, and the meter is screwed to the pipework system by means of two union nuts. MID-conform compact heat meter with integrated M-Bus and Impulse-IN interface inductive scanning process, display of current and cumulative values, check number and many service and operating parameters, storage of the maximum values, two additional impulse inputs for the connection of up to two water meters with impulse output, Parameter setting via the operating keys or the software Q suite 5 - Measuring cycle: 36 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication: Q M-Bus / Impuls-IN Nominal flow 0.6 m³/h, temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5S 1 HMR5-000D ,00 Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5S 1 HMR5-000D ,00 Nominal flow 2.5 m³/h, temperature sensor 5.0 x 45 mmfor direct or immersion sleeve measurement Calculator unit removable G 1" x 130 mm 5S 1 HMR5-000D ,00 Note: Article numbers cover English language version and 10-year battery. Note: It is not possible to fit heat meters featuring integrated communication interfaces with external communication modules. Further Q heat parameterising variants available on request. See also matrix on page 18. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 12

15 2 Compact heat meters 2.3 Q heat 5 - Screw-type meters (QDS) - integrated communication The heat meters listed below have been designed for installation in systems where an installation section is available with the dimensions listed next to the meter, and the meter is screwed to the pipework system by means of two union nuts. MID-conform compact heat meter with integrated M-Bus inductive scanning process, display of current and cumulative values, check number and many service and operating parameters, storage of the maximum values, Parameter setting via the operating keys or the software Q suite 5 - Measuring cycle: 36 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication: Q M-Bus Nominal flow 0.6 m³/h, temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5S 1 HMR5-000C ,00 Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5S 1 HMR5-000C ,00 Nominal flow 2.5 m³/h, temperature sensor 5.0 x 45 mmfor direct or immersion sleeve measurement Calculator unit removable G 1" x 130 mm 5S 1 HMR5-000C ,00 Note: Article numbers cover English language version and 10-year battery. Note: It is not possible to fit heat meters featuring integrated communication interfaces with external communication modules. Further Q heat parameterising variants available on request. See also matrix on page 18. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 13

16 2 Compact heat meters 2.4 Q heat 5 - Measuring capsule ISTA-compatible (IST) The heat meters listed below have been designed for installation in systems where an installation section is available with a ISTAcompatible single-pipe connection piece (EAT, EAS). All suitable meters are marked with "IST". MID-conform compact heat meter with integrated IrDA interface, inductive scanning process, current value as well as annual value and monthly values with checksum, detection of direction of rotation, programmable due date as well as display and storage of the maximum values, prepared for installation of external communication modules for integration in a Q walk-by, Q AMR or Q M-Bus system (see chapter 6 onwards), retrofitting on site is possible at any time, Parameter setting via the operating keys or the software Q suite 5 - Measuring cycle: 36 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication Q opto (IrDA interface) Nominal flow 0.6 m³/h, Temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 2" 5J 1 HMC ,00 Calculator unit removable G 2" 5L 1 HMR ,00 Nominal flow 1.5 m³/h, Temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 2" 5J 1 HMC ,00 Calculator unit removable G 2" 5L 1 HMR ,00 Nominal flow 2.5 m³/h, Temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 2" 5J 1 HMC ,00 Calculator unit removable G 2" 5L 1 HMR ,00 Nominal flow 0.6 m³/h, temperature sensor 5.2 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 2" 5J 1 HMC ,00 Calculator unit removable G 2" 5L 1 HMR ,00 Nominal flow 1.5 m³/h, temperature sensor 5.2 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 2" 5J 1 HMC ,00 Calculator unit removable G 2" 5L 1 HMR ,00 Nominal flow 2.5 m³/h, temperature sensor 5.2 x 45 mm for direct or immersion sleeve measurement Calculator unit cannot be removed G 2" 5J 1 HMC ,00 Calculator unit removable G 2" 5L 1 HMR ,00 Note: Article numbers cover English language version and 10-year battery. Further Q heat parameterising variants available on request. See also matrix on page 18. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 14

17 2 Compact heat meters 2.5 Q heat 5 - Measuring capsule ISTA-compatible (IST) incl. Q module 5.5 MID-conform measuring capsule heat meter ISTA-compatible (IST) - With mounted, sealed and parameterised radio add-on module - For integration into the Q AMR or Q walk-by system - Measuring cycle: 36 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years Please note! Excluded from calibration (formerly re-calibration) and buyback. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication: Radio / S-mode und - S-Mode features see page 1 - Radio transmission compatible with heat meters incl.wfz166.ox / WFZ16.Ox, mixed operation possible! Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 2" 5L 1 HMR5-000N A 345,00 Communication: Radio / C-mode und - C-Mode features see page 1 - Radio transmission (walk-by) compatible with WFZ166.Ox, mixed operation possible! Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 2" 5L 1 HMR5-000T A 345,00 Note: Article numbers cover English language version and 10-year battery. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 15

18 2 Compact heat meters 2.6 Q heat 5 - Screw-type meters - Ultrasonic (US) Ultrasonic heat meters are used wherever especially precise measurements with long-term stability are required. The patented and innovative measuring process guarantees measuring accuracy over the whole product service life. The extremely small installation height allows it to be used in very narrow space. There is a free choice of installation position for the metering device, and even upside down installation is possible, allowing flexible adaptation to the installation conditions found on site. The device has a detachable calculator unit as a standard feature. All suitable Ultrasonic meters are marked with"us". MID-conform compact Ultrasonic heat meter with integrated IrDA interface, current value as well as annual value and monthly values with checksum, detection of direction of rotation, programmable due date as well as display and storage of the maximum values, prepared for installation of external communication modules for integration in a Q walk-by, Q AMR or Q M-Bus system (see chapter 6 onwards), retrofitting on site is possible at any time, Parameter setting via the operating keys or the software Q suite 5 - Measuring cycle: 12 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication Q opto (IrDA interface) Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5M 1 HMR5-00A ,00 Nominal flow 1.5 m³/h, temperature sensor 5.2 x 45 mm for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5M 1 HMR5-00A ,00 Nominal flow 2.5 m³/h, temperature sensor 5.0 x 45 mmfor direct or immersion sleeve measurement Calculator unit removable G 1" x 130 mm 5M 1 HMR5-00A ,00 Nominal flow 2.5 m³/h, temperature sensor 5.2 x 45 mmfor direct or immersion sleeve measurement Calculator unit removable G 1" x 130 mm 5M 1 HMR5-00A ,00 Note: Article numbers cover English language version and 10-year battery. Further Q heat parameterising variants available on request. See also matrix on page 18. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 16

19 2 Compact heat meters 2.7 Q heat 5 - Screw-type meters - Ultrasonic (US) incl. Q module 5.5 MID-conform compact Ultrasonic heat meter - With mounted, sealed and parameterised radio add-on module - For integration into the Q AMR or Q walk-by system - Measuring cycle: 12 seconds - Display unit: kwh - Installation: Return flow - Battery: 10 years Please note! Excluded from calibration (formerly re-calibration) and buyback. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Communication: Radio / S-mode und - S-Mode features see page 1 - Radio transmission compatible with heat meters incl. WFZ166.Ox or WFZ16.Ox, mixed operation possible! Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5M 1 HMR5-00AN A 355,00 Nominal flow 2.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 1" x 130 mm 5M 1 HMR5-00AN A 365,00 Communication: Radio / C-mode walk-by und AMR - C-Mode features see page 1 - Radio transmission (walk-by) compatible with WFZ166.Ox, mixed operation possible! Nominal flow 1.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 3/4" x 110 mm 5M 1 HMR5-00AT A 355,00 Nominal flow 2.5 m³/h, temperature sensor 5.0 x 45 mm, 1.5 m sensor cable, for direct or immersion sleeve measurement Calculator unit removable G 1" x 130 mm 5M 1 HMR5-00AT A 365,00 Note: Article numbers cover English language version and 10-year battery. Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 17

20 2 Compact heat meters 2.8 Q heat 5 - part number matrix Product family Block1 Block2 Block3 Block4 Basic Price Heat Meter Compact Q heat 5 HMC5 x x x x x x x x x x x x x 230,00 Heat Meter Removable Q heat 5 HMR5 x x x x x x x x x x x x x 260,00 Logo Block1 Block2 Block3 Block4 Extra charge QUNDIS (standard) HMx x x x x x x x x x x x - Version Block1 Block2 Block3 Block4 Extra charge standard H M x 5 x x 0 x x x x x x x x x x - + cold metering (not MID-compliant) H M x 5 x x 1 x x x x x x x x x x 35,00 + solar metering (not MID-compliant) H M x 5 x x 2 x x x x x x x x x x 75,00 + cold metering + solar metering (not MID-compliant) H M x 5 x x 3 x x x x x x x x x x 110,00 + ultrasonic (only removable) HMR5 xxa x xxxx xxxxx 20,00 Communication interface Block1 Block2 Block3 Block4 Extra charge opto (IrDA) H M x 5 x x x 1 x x x x x x x x x - IrDA + M-Bus + Impuls in (1 liters per pulse / filter off) H M x 5 x x x 5 x x x x x x x x x 30,00 IrDA + M-Bus H M x 5 x x x C x x x x x x x x x 20,00 IrDA + M-Bus + Impuls in (10 liters per pulse / filter off) H M x 5 x x x D x x x x x x x x x 30,00 IrDA + walk-by + AMR (S-mode; add-on module with 10 year battery) H M x 5 x x x N x x x x x x x x A 70,00 IrDA + walk-by + AMR (C-mode; add-on module with 10 year battery) H M x 5 x x x T x x x x x x x x A 70,00 Flow sensor Block1 Block2 Block3 Block4 Extra charge Screwed connection m³/h mm - return flow installation H M x 5 x x x x 0 x x x x x x x x - Screwed connection m³/h mm - return flow installation H M x 5 x x x x 1 x x x x x x x x - Screwed connection m³/h mm - return flow installation H M x 5 x x x x 2 x x x x x x x x 10,00 Capsule (IST) m³/h - G2 - return flow installation H M x 5 x x x x 4 x x x x x x x x 10,00 Capsule (IST) m³/h - G2 - return flow installation H M x 5 x x x x 5 x x x x x x x x 10,00 Capsule (IST) m³/h - G2 - return flow installation H M x 5 x x x x 6 x x x x x x x x 20,00 Capsule (AMS) m³/h - M77x1,5 - return flow installation (only removable) H M R 5 x x x x 8 x x x x x x x x 15,00 Screwed connection m³/h - 80 mm - return flow installation H M x 5 x x x x H x x x x x x x x - Screwed connection m³/h mm - supply flow installation H M x 5 x x x x J x x x x x x x x 45,00 Screwed connection m³/h mm - supply flow installation H M x 5 x x x x K x x x x x x x x 45,00 Screwed connection m³/h mm - supply flow installation H M x 5 x x x x L x x x x x x x x 55,00 Capsule (IST) m³/h - G2 - supply flow installation H M x 5 x x x x M x x x x x x x x 55,00 Capsule (IST) m³/h - G2 - supply flow installation H M x 5 x x x x N x x x x x x x x 55,00 Capsule (IST) m³/h - G2 - supply flow installation H M x 5 x x x x O x x x x x x x x 65,00 Capsule (AMS) m³/h - M77x1,5 - supply flow installation (only removable) H M R 5 x x x x Q x x x x x x x x 70,00 Screwed connection m³/h - 80 mm - supply flow installation H M x 5 x x x x Y x x x x x x x x 45,00 Temperature sensor Block1 Block2 Block3 Block4 Extra charge 5,0 x 45 mm m H M x 5 x x x x x 0 x x x x x x x - 5,2 x 45 mm m H M x 5 x x x x x 1 x x x x x x x - 6,0 x 50 mm m H M x 5 x x x x x 2 x x x x x x x 15,00 nach AGFW m H M x 5 x x x x x 3 x x x x x x x 15,00 5,0 x 45 mm m H M x 5 x x x x x 4 x x x x x x x 15,00 5,2 x 45 mm m H M x 5 x x x x x 5 x x x x x x x 15,00 6,0 x 50 mm m H M x 5 x x x x x 6 x x x x x x x 30,00 nach AGFW m H M x 5 x x x x x 7 x x x x x x x 30,00 6,0 x 60 mm m (only AMS capsule) H M R 5 x x x x x 8 x x x x x x x - 6,0 x 60 mm m (only AMS capsule) H M R 5 x x x x x 9 x x x x x x x 15,00 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 18

21 2 Compact heat meters 2.8 Q heat 5 - part number matrix Power supply + measuring cycle Block1 Block2 Block3 Block4 Extra charge Battery 6 years - 36 seconds H M x 5 x x x x x x 0 x x x x x x - Battery 10 years - 36 seconds H M x 5 x x x x x x 1 x x x x x x 5,00 Battery 6 years - 6 seconds H M x 5 x x x x x x 4 x x x x x x 5,00 Battery 10 years - 12 seconds (only ultrasonic) H M x 5 x x x x x x 8 x x x x x x 5,00 Battery 6 years - 4 seconds (only ultrasonic) H M x 5 x x x x x x 9 x x x x x x - Approval + medium Block1 Block2 Block3 Block4 Extra charge Heat MID/Class 3, wihtou cold, water H M x 5 x x x x x x x 0 x x x x x - without - (heating) water + Glythermin P44 H M x 5 x x x x x x x A x x x x x - without - (heating) water + Tyfocor L H M x 5 x x x x x x x B x x x x x - without - (heating) water + Tyfocor N H M x 5 x x x x x x x C x x x x x - without - (heating) water + Antifrogen L H M x 5 x x x x x x x D x x x x x - without - (heating) water + Antifrogen N H M x 5 x x x x x x x E x x x x x - without - (heating) water + Dowcal 20 H M x 5 x x x x x x x F x x x x x - without - (heating) water + Gelbin DC 924 L H M x 5 x x x x x x x G x x x x x - without - (heating) water + Tyfocor LS H M x 5 x x x x x x x H x x x x x - without - (heating) water + Solarliquid L H M x 5 x x x x x x x L x x x x x - Due date Block1 Block2 Block3 Block4 Extra charge standard H M x 5 x x x x x x x x 0 x x x x - more on request Temperature switch-on threshold: Block1 Block2 Block3 Block4 Extra charge 1,0 / 0,2 K (standard) H M x 5 x x x x x x x x x 0 x x x - more on request Labeling and documenation Block1 Block2 Block3 Block4 Extra charge German (standard) H M x 5 x x x x x x x x x x 0 x x - English H M x 5 x x x x x x x x x x 2 x x - Italian H M x 5 x x x x x x x x x x 3 x x - French H M x 5 x x x x x x x x x x 4 x x - Spanish H M x 5 x x x x x x x x x x 5 x x - Greek H M x 5 x x x x x x x x x x 6 x x - Lithuanian H M x 5 x x x x x x x x x x 7 x x - Czech H M x 5 x x x x x x x x x x 8 x x - Polish H M x 5 x x x x x x x x x x 9 x x - Slovenian HMx5 xxxx xxxx xxax x - Russian HMx5 xxxx xxxx xxrx x - Turkish HMx5 xxxx xxxx xxtx x - Display Block1 Block2 Block3 Block4 Extra charge kwh (Standard) H M x 5 x x x x x x x x x x x 0 x - GJ H M x 5 x x x x x x x x x x x 4 x - more on request Special options Block1 Block2 Block3 Block4 Extra charge none H M x 5 x x x x x x x x x x x x 0 - Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 2, page 19

22 3 Split heat meters Heat meters are devices which are mounted in a water cycle, can measure its heat output and save the data recorded. A distinction is made between heat meters and combined heat/cold meters. Heat meters record temperatures in the water circuit s supply and return flow as well as the volume flow rate, and assume a pure heat output of the pipe system (heating operation) for the consumption calculation. In contrast, combined heat/cold meters record both the heat output and the heat input of the pipe system (cooling operation). The data of both operating modes are managed in separate memories. Both device types can display and/or store different values, e.g. the cumulated values at a selectable due date or end-of-the-month values and a fault message in case of an error. Both device types are optionally available with an integrated M-Bus module. In addition, all the meters featured in this chapter can be retrofitted with external communication modules on site and can thus be integrated in the Q AMR, Q walk-by or Q M-Bus system. You can find the external module variants from chapter 6 onwards. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 21

23 3 Split heat meters The heat meters listed below have been designed for installation in systems where there is an installation section available with the dimensions listed next to the meter. 3.1 Ultrasonic flow sensors (thread) MID-compliant split heat meter G 03 consisting of: calculator unit with optical interface for programming / readout and for retrofitting of external communication modules, MID-compliant pair of temperature sensors PT for dimensions see below with 3 m cable, direct measurement up to nominal flow of 6.0 m³/h, ultrasonic flow sensor with thread connections and a dynamic ratio of 1:100 for any required installation position, up to and including a nominal flow of 10.0 m³/h with 5.6 mm sensor bore hole, operating pressure PN16 bar, approved medium temperature 130 C up to Qp 2.5 and 150 C from Qp 3.5, display of annual value with check number, programmable scheduled date, parameterisation possible via operating key and adapter ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. G 03 nominal flow rate 0.6 m³/h, temperature sensor 5.2 x 45 mm Standard G 3/4" x 110 mm C5 1 G M ,20 alternative flow sensor G 1" x 130 mm C5 1 G M 4003 with H 4 369,50 alternative flow sensor G 1" x 190 mm C5 1 G M 4003 with H 4 378,30 G 03 nominal flow rate 1.5 m³/h, temperature sensor 5.2 x 45 mm Standard G 3/4" x 110 mm C5 1 G M ,20 alternative flow sensor G 1" x 130 mm C5 1 G M 4003 with H 4 378,30 alternative flow sensor G 1" x 190 mm C5 1 G M 4003 with H 4 384,80 G 03 nominal flow rate 2.5 m³/h, temperature sensor 5.2 x 45 mm Standard G 1" x 130 mm C5 1 G M ,00 alternative flow sensor G 1" x 190 mm C5 1 G M 4003 with H 4 422,80 G 03 nominal flow rate 3.5 m³/h, temperature sensor 6.0 x 105 mm (for existing installations) Standard G 5/4" x 260 mm C5 1 G M ,67 alternative G 5/4" x 135 mm C5 1 G M 4003 with H 4 652,17 alternative G 5/4" x 150 mm C5 1 G M 4003 with H 4 652,17 alternative G 1½" x 150 mm C5 1 G M 4003 with H 4 652,17 alternative G 1½" x 260 mm C5 1 G M 4003 with H 4 591,67 G 03 nominal flow rate 3.5 m³/h, temperature sensor 5.2 x 45 mm (for new installations) Standard G 5/4" x 260 mm C5 1 G M ,40 alternative flow sensor G 5/4" x 135 mm C5 1 G M 4003 with H 4 595,90 alternative flow sensor G 5/4" x 150 mm C5 1 G M 4003 with H 4 595,90 alternative flow sensor G 1½" x 150 mm C5 1 G M 4003 with H 4 595,90 alternative flow sensor G 1½" x 260 mm C5 1 G M 4003 with H 4 535,40 G 03 nominal flow rate 6.0 m³/h, temperature sensor 6.0 x 105 (for existing installations) Standard G 5/4" x 260 mm C5 1 G M ,67 alternative flow sensor G 5/4" x 135 mm C5 1 G M 4003 with H 4 652,17 alternative flow sensor G 5/4" x 150 mm C5 1 G M 4003 with H 4 652,17 alternative flow sensor G 1½" x 150 mm C5 1 G M 4003 with H 4 697,17 alternative flow sensor G 1½" x 260 mm C5 1 G M 4003 with H 4 697,17 alternative flow sensor G 2" x 150 mm C5 1 G M 4003 with H 4 736,22 G 03 nominal flow rate 6.0 m³/h, temperature sensor 5.2 x 45 mm (for new installations) Standard G 5/4" x 260 mm C5 1 G M ,40 alternative flow sensor G 5/4" x 135 mm C5 1 G M 4003 with H 4 595,90 alternative flow sensor G 5/4" x 150 mm C5 1 G M 4003 with H 4 595,90 alternative flow sensor G 1½" x 150 mm C5 1 G M 4003 with H 4 640,90 alternative flow sensor G 1½" x 260 mm C5 1 G M 4003 with H 4 640,90 alternative flow sensor G 2" x 150 mm C5 1 G M 4003 with H 4 679,95 G 03 nominal flow rate 10.0 m³/h, temperature sensor 6.0 x 105 mm Standard G 2" x 300 mm C5 1 G M ,20 alternative flow sensor G 2" x 200 mm C5 1 G M 4003 with H 4 795,47 Note: Article numbers cover English language version and 10-year battery. Further Q heat parameterising variants available on request. See also matrix on page 25. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 22

24 3 Split heat meters 3.2 Ultrasonic flow sensors (flange) MID-compliant split heat meter G 04 consisting of: calculator unit with optical interface for programming / readout and for retrofitting of external communication modules, MID-compliant pair of temperature sensors PT for dimensions see below with 3 m cable, direct measurement up to nominal flow of 6.0 m³/h, ultrasonic flow sensor with flange connections and a dynamic ratio of 1:100 for any required installation position, up to and including a nominal flow of 10.0 m³/h with 5.6 mm sensor bore hole, operating pressure PN25 bar, approved medium temperature 150 C, display of annual value with check number, programmable scheduled date, parameterisation possible via operating key and adapter ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. G 04 nominal flow rate 3.5 m³/h, temperature sensor 6.0 x 105 (for existing installations) DN 25 x 260 mm C5 1 G M ,07 G 04 nominal flow rate 3.5 m³/h, temperature sensor 5.2 x 45 mm (for new installations) DN 25 x 260 mm C5 1 G M ,80 G 04 nominal flow rate 6.0 m³/h, temperature sensor 6.0 x 105 mm (for existing installations) DN 25 x 260 mm C5 1 G M ,07 alternative flow sensor DN 32 x 260 mm C5 1 G M 4003 with H 4 774,27 G 04 nominal flow rate 6.0 m³/h, temperature sensor 5.2 x 45 mm (for new installations) DN 25 x 260 mm C5 1 G M ,80 alternative flow sensor DN 32 x 260 mm C5 1 G M 4003 with H 4 718,00 G 04 nominal flow rate 10.0 m³/h, temperature sensor 6.0 x 105 mm DN 40 x 300 mm C5 1 G M ,50 G 04 nominal flow rate 15.0 m³/h, temperature sensor 6.0 x 140 mm DN 50 x 270 mm C5 1 G M ,80 G 04 nominal flow rate 25.0 m³/h, temperature sensor 6.0 x 140 mm DN 65 x 300 mm C5 1 G M ,90 G 04 nominal flow rate 40.0 m³/h, temperature sensor 6.0 x 140 mm DN 80 x 300 mm C5 1 G M ,70 G 04 nominal flow rate 60.0 m³/h, temperature sensor 6.0 x 140 mm DN 100 x 360 mm C5 1 G M 4003 with H ,97 Note: Article numbers cover English language version and 10-year battery. Further Q heat parameterising variants available on request. See also matrix on page 25. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 23

25 3 Split heat meters 3.3 Woltmann flow sensors (flange) MID-compliant split heat meter G 04 consisting of: calculator unit with optical interface for programming / readout and for retrofitting of external communication modules, Woltman flow sensor with flange connections for the indicated installation position, display of annual value with check number, programmable scheduled date, approved medium temperature 120 C, parameterisation possible via operating key and adapter - mounting: return flow - battery life: 10 years - MID-compliant pair of temperature sensors: PT 1000 with 6.0 x 140 mm and 3 m cable ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. G 04 nominal flow rate 15.0 m³/h for horizontal installation 4-hole DN 50 x 270 mm C5 1 G M ,10 G 04 nominal flow rate 25.0 m³/h for horizontal installation 4-hole DN 65 x 300 mm C5 1 G M ,30 G 04 nominal flow rate 40.0 m³/h for horizontal installation 8-hole DN 80 x 300 mm C5 1 G M ,30 G 04 nominal flow rate 60.0 m³/h for horizontal installation 8-hole DN 100 x 360 mm C5 1 G M ,00 G 04 nominal flow rate 15.0 m³/h for horizontal / vertical installation 4-hole DN 50 x 200 mm C5 1 G M ,10 G 04 nominal flow rate 25.0 m³/h for horizontal / vertical installation 4-hole DN 65 x 200 mm C5 1 G M ,30 G 04 nominal flow rate 32.0 m³/h for horizontal / vertical installation 8-hole DN 80 x 225 mm C5 1 G M ,30 G 04 nominal flow rate 60.0 m³/h for horizontal / vertical installation 8-hole DN 100 x 250 mm C5 1 G M ,00 G 04 nominal flow rate m³/h for horizontal / vertical installation 8-hole DN 125 x 250 mm C5 1 G M ,50 G 04 nominal flow rate m³/h for horizontal / vertical installation 8-hole DN 150 x 300 mm C5 1 G M ,40 G 04 nominal flow rate m³/h for horizontal / vertical installation 12-hole DN 200 x 350 mm C5 1 G M ,40 Note: Article numbers cover English language version and 10-year battery. Further Q heat parameterising variants available on request. See also matrix on page 25. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 24

26 3 Split heat meters 3.4 Q heat split - part number matrix Product family + version AAA BBBB CC D EFGH Price Device Heat meter with threaded connections G03 x x x x x x x x x x x 126,50 Heat meter with flange connections G04 x x x x x x x x x x x 126,50 Combined heat/cold meter with threaded connections G13 x x x x x x x x x x x 162,10 Combined heat/cold meter with flange connections G14 x x x x x x x x x x x 162,10 Solar heat meter with threaded connections G18 x x x x x x x x x x x 227,10 Solar heat meter with flange connections G19 x x x x x x x x x x x 227,10 ASN code flow sensor Price flow sensor Ultrasonic flow sensors - thread AAA BBBB CC D EFGH Ultrasonic / any installation position / qp 0.6 m³/h - G ¾" x 110 mm Gxx x x x x x x x H 4 148,00 Ultrasonic / any installation position / qp 0.6 m³/h - G 1" x 130 mm Gxx x x x x x x x H 4 153,30 Ultrasonic / any installation position / qp 0.6 m³/h - G 1" x 190 mm Gxx x x x x x x x H 4 162,10 Ultrasonic / any installation position / qp 1.5 m³/h - G ¾" x 110 mm Gxx x x x x x x x H 4 148,00 Ultrasonic / any installation position / qp 1.5 m³/h - G ¾" x 130 mm Gxx x x x x x x x H 4 162,10 Ultrasonic / any installation position / qp 1.5 m³/h - G1" x 190 mm Gxx x x x x x x x H 4 168,60 Ultrasonic / any installation position / qp 2.5 m³/h - G 1" x 130 mm Gxx x x x x x x x H 4 156,80 Ultrasonic / any installation position / qp 2.5 m³/h - G 1" x 190 mm Gxx x x x x x x x H 4 206,60 Ultrasonic / any installation position / qp 3.5 m³/h - G 1¼" x 260 mm Gxx x x x x x x x H 4 319,20 Ultrasonic / any installation position / qp 3.5 m³/h - G 1¼" x 135 mm Gxx x x x x x x x H 4 379,70 Ultrasonic / any installation position / qp 3.5 m³/h - G 1¼" x 150 mm Gxx x x x x x x x H 4 379,70 Ultrasonic / any installation position / qp 3.5 m³/h - G 1½" x 150 mm Gxx x x x x x x x H 4 379,70 Ultrasonic / any installation position / qp 3.5 m³/h - G 1½" x 260 mm Gxx x x x x x x x H 4 319,20 Ultrasonic / any installation position / qp 6.0 m³/h - G 1¼" x 260 mm Gxx x x x x x x x H 4 319,20 Ultrasonic / any installation position / qp 6.0 m³/h - G 1¼" x 135 mm Gxx x x x x x x x H 4 379,70 Ultrasonic / any installation position / qp 6.0 m³/h - G 1¼ " x 150 mm Gxx x x x x x x x H 4 379,70 Ultrasonic / any installation position / qp 6.0 m³/h - G 1½" x 150 mm Gxx x x x x x x x H 4 424,70 Ultrasonic / any installation position / qp 6.0 m³/h - G 1½" x 260 mm Gxx x x x x x x x H 4 424,70 Ultrasonic / any installation position / qp 6.0 m³/h - G 2" x 150 mm Gxx x x x x x x x H 4 463,75 Ultrasonic / any installation position / qp 10.0 m³/h - G 2" x 300 mm Gxx x x x x x x x H 4 463,73 Ultrasonic / any installation position / qp 10.0 m³/h - G 2" x 200 mm Gxx x x x x x x x H 4 523,00 ASN code flow sensor Price flow sensor Ultrasonic flow sensors - flange AAA BBBB CC D EFGH Ultrasonic / any installation position / qp 3.5 m³/h - FL DN mm Gxx x x x x x x x H 4 476,60 Ultrasonic / any installation position / qp 6.0 m³/h - FL DN mm Gxx x x x x x x x H 4 476,60 Ultrasonic / any installation position / qp 6.0 m³/h - FL DN mm Gxx x x x x x x x H 4 501,80 Ultrasonic / any installation position / qp 10.0 m³/h - FL DN mm Gxx x x x x x x x H 4 628,00 Ultrasonic / any installation position / qp 15.0 m³/h - FL DN mm Gxx x x x x x x x H 4 974,20 Ultrasonic / any installation position / qp 25.0 m³/h - FL DN mm Gxx x x x x x x x H ,30 Ultrasonic / any installation position / qp 40.0 m³/h - FL DN mm Gxx x x x x x x x H ,13 Ultrasonic / any installation position / qp 40.0 m³/h - FL DN mm Gxx x x x x x x x H ,40 ASN code flow sensor Price flow sensor Woltman-jet flow sensors - flange AAA BBBB CC D EFGH Woltman-jet / horizontal / qp 15.0 m³/h - FL DN mm Gxx x x x x x x H 4 793,30 Woltman-jet / horizontal / qp 25.0 m³/h - FL DN mm Gxx x x x x x x H 4 825,50 Woltman-jet / horizontal / qp 40.0 m³/h - FL DN mm Gxx x x x x x x H 4 936,50 Woltman-jet / horizontal / qp 60.0 m³/h - FL DN mm Gxx x x x x x x H ,20 Woltman-jet / horizontal + vertical / qp 15.0 m³/h - FL DN mm Gxx x x x x x x H 4 793,30 Woltman-jet / horizontal + vertical / qp 25.0 m³/h - FL DN mm Gxx x x x x x x H 4 825,50 Woltman-jet / horizontal + vertical / qp 32.0 m³/h - FL DN mm Gxx x x x x x x H 4 936,50 Woltman-jet / horizontal + vertical / qp 60.0 m³/h - FL DN mm Gxx x x x x x x H ,20 Woltman-jet / horizontal + vertical / qp m³/h - FL DN mm Gxx x x x x x x H ,70 Woltman-jet / horizontal + vertical / qp m³/h - FL DN mm Gxx x x x x x x H ,60 Woltman-jet / horizontal + vertical / qp m³/h - FL DN mm Gxx x x x x x x H ,60 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 25

27 3 Split heat meters 3.4 Q heat split - part number matrix Logo AAA BBBB CC D EFGH Price QUNDIS G x x x x x x 0 x x x x x x - Temperature sensor AAA BBBB CC D EFGH Price 5.2 x 45 mm / 3.0 m cable G x x x x x x x 0 x x x x x 61, x 105 mm / 3.0 m cable G x x x x x x x 1 x x x x x 118, x 140 mm / 3.0 m cable G x x x x x x x 2 x x x x x 121, x 45 mm / 10.0 m cable G x x x x x x x 3 x x x x x 122, x 105 mm / 10.0 m cable G x x x x x x x 4 x x x x x 184, x 140 mm / 10.0 m cable G x x x x x x x 5 x x x x x 187,70 Initial calibration AAA BBBB CC D EFGH Price heat MID, cold without (standard) G x x x x x x x x M x x x x - heat without, cold without G x x x x x x x x E x x x x - Power supply AAA BBBB CC D EFGH Price 6-year battery G x x x x x x x x x 0 x x x - 10-year battery G x x x x x x x x x 1 x x x 5,00 6-year battery + 2nd battery (for Ultrasonic) G x x x x x x x x x 3 x x x 22,77 10-year battery + 2nd battery (for Ultrasonic) G x x x x x x x x x 4 x x x 27,77 Installation location for flow sensor AAA BBBB CC D EFGH Price Return flow (cold pipe) G x x x x x x x x x x 0 x x - Supply flow (hot pipe) G x x x x x x x x x x 1 x x 58,80 Internal communication module AAA BBBB CC D EFGH Price none G x x x x x x x x x x x 0 x - M-Bus G x x x x x x x x x x x 2 x 70,20 Impulse output G x x x x x x x x x x x 3 x 27,20 Impulse output combined heat/cold meter G x x x x x x x x x x x 3 x 37,50 Approval mark + marking language AAA BBBB CC D EFGH Price MID, German G x x x x x x x x x x x x 0 - MID, English G x x x x x x x x x x x x 3 - MID, Italian G x x x x x x x x x x x x 4 - MID, Spanish G x x x x x x x x x x x x 5 - MID, Lithuanian G x x x x x x x x x x x x 8 - Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 26

28 3 Split heat meters 3.5 Calculator units MID-conform calculator unit opt. interface for programming / readout as well as retrofitting of external communication modules, for the connection of the given temperature sensors either using 2 or 4-conductor technology as well as flow sensors with its specified pulse values, display of the annual value with checksum, programmable due date, display unit MWh, Parameter setting via the operating key and adapter possible Suitable for the connection of any required flow sensors with impulse output. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Calculator units R 20 with 10-year battery, display unit MWh without additional power supply via the calculator unit Heat meter PT l/imp. C4 1 R M ,70 Heat meter PT l/imp. C4 1 R M ,70 Heat meter PT l/imp. C4 1 R M ,70 Heat meter PT l/imp. C4 1 R M ,70 Heat meter PT l/imp. C4 1 R M ,70 Heat meter PT l/imp. C4 1 R M ,70 Heat meter PT l/imp. C4 1 R M ,70 Calculator units R 21 with 10-year battery, display unit MWh without additional power supply via the calculator unit Combined heat / cold meter PT l/imp. C4 1 R M ,30 Combined heat / cold meter PT l/imp. C4 1 R M ,30 Combined heat / cold meter PT l/imp. C4 1 R M ,30 Combined heat / cold meter PT l/imp. C4 1 R M ,30 Calculator units R 28 with 10-year battery, display unit MWh without additional power supply via the calculator unit Solar heat meter - Medium: Dowcal 20 PT l/imp. C4 1 R E ,70 Solar heat meter - Medium: Antifrogen N PT l/imp. C4 1 R E ,70 Solar heat meter - Medium: Tyfocor L PT l/imp. C4 1 R E ,70 Note: Article numbers cover English language version and 10-year battery. Other split calculator variants are available on request: - Adaptations for glycol additives - Volume measurement in the supply flow (hot pipe) - Combined heat and cold meters (cold metering not MID-compliant) - Integrated M-Bus module - For temperature sensor connection PT100 or PT500 - integrated impulse output module - Devices with 6-year battery - Display unit kwh, MJ, kj - Display of decimal places - Marking languages: German, English, Italien, Spanisch, Lithuanian Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 27

29 3 Split heat meters 3.5 Calculator units Calculator units R 20 with 10-year battery + 2nd battery, display unit MWh with additional power supply via the calculator unit (standard for QUNDIS split heat meters with ultrasonic flow sensors) Heat meter PT l/imp. C4 1 R20-F M ,50 Heat meter PT l/imp. C4 1 R20-F M ,50 Heat meter PT l/imp. C4 1 R20-F M ,50 Heat meter PT l/imp. C4 1 R20-F M ,50 Heat meter PT l/imp. C4 1 R20-F M ,50 Heat meter PT l/imp. C4 1 R20-F M ,50 Note: Article numbers cover English language version and 10-year battery. Other split calculator variants are available on request: - Adaptations for glycol additives - Volume measurement in the supply flow (hot pipe) - Combined heat and cold meters (cold metering not MID-compliant) - Integrated M-Bus module - For temperature sensor connection PT100 or PT500 - integrated impulse output module - Devices with 6-year battery - Display unit kwh, MJ, kj - Display of decimal places - Marking languages: German, English, Italien, Spanisch, Lithuanian Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 3, page 28

30 4 Water meters Water meters are mainly used in business to measure hot and cold water consumption. QUNDIS supplies water meters both as screw-type and capsule meter variants. Depending on the type of meter and installation material used, they can be mounted on-wall or in-wall directly in the water pipe. An impellor sensor measures the flow, with the cumulated consumption either shown by a counter on mechanical water meters or on a display in the case of electronic water meters. As a recognised State Testing Centre for water meters, we can calibrate water meters and check their functionality and precision. This also allows us to use this quality assurance tool for our own developments of course, and put new developments and devices through their paces under real conditions. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 29

31 4 Water meters 4.1 Q water Electronic screw-type water meters The new water meter generation from QUNDIS provides both screw-type and capsule meters. Thanks to a great selection of measuring capsule versions for the most common connection interfaces from all major manufacturers, nearly every installation situation can be handled. With the improved radio performance and flexibility during readout, the Q water 5.5 is setting new standards. Product details: - MID-compliant screw-type and measuring capsule water meter (precision classes R80 horizontal /R40 vertical) - Easy fitting thanks to a plastic capsule seal and automatic radio activation - No parameterising required - High device protection level (IP68) - IrDA-interface for readout and parameterisation of the water meter rotatable calculator unit with 8-digit LC display - Horizontal and vertical installation possible - Counts forwards and backwards - Leaks are reported - Electronic scanning makes tampering impossible - Saving of 13 monthly values Communication: Radio / S-mode und - S-mode features see page 1 - switch from S to C mode possible ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Permanent flow rate Q₃ 2.5 m³/h - Connection thread G 3/4" (ISO 228) - Nominal width 15 (DN) Installation length 80 mm max. 30 C water temperature MF 1 WME5-000N V00 95,20 max. 90 C water temperature MF 1 WME5-001N V00 95,20 Installation length 110 mm max. 30 C water temperature MF 1 WME5-000N V00 95,20 max. 90 C water temperature MF 1 WME5-001N V00 95,20 Permanent flow rate Q₃ 4.0 m³/h - Connection thread G 1" (ISO 228) - Nominal width 20 (DN) Installation length 130 mm max. 30 C water temperature MF 1 WME5-000N V00 95,20 max. 90 C water temperature MF 1 WME5-001N V00 95,20 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 30

32 4 Water meters 4.1 Q water Electronic screw-type water meters Product details: - MID-compliant screw-type and measuring capsule water meter (precision classes R80 horizontal /R40 vertical) - Easy fitting thanks to a plastic capsule seal and automatic radio activation - No parameterising required - High device protection level (IP68) - IrDA-interface for readout and parameterisation of the water meter rotatable calculator unit with 8-digit LC display - Horizontal and vertical installation possible - Counts forwards and backwards - Leaks are reported - Electronic scanning makes tampering impossible - Saving of 13 monthly values Communication: Radio / C-Mode und - C-mode features see page 1 - switch from C to S mode possible ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Permanent flow rate Q₃ 2.5 m³/h - Connection thread G 3/4" (ISO 228) - Nominal width 15 (DN) Installation length 80 mm max. 30 C water temperature MF 1 WME5-000T V00 95,20 max. 90 C water temperature MF 1 WME5-001T V00 95,20 Installation length 110 mm max. 30 C water temperature MF 1 WME5-000T V00 95,20 max. 90 C water temperature MF 1 WME5-001T V00 95,20 Permanent flow rate Q₃ 4.0 m³/h - Connection thread G 1" (ISO 228) - Nominal width 20 (DN) Installation length 130 mm max. 30 C water temperature MF 1 WME5-000T V00 95,20 max. 90 C water temperature MF 1 WME5-001T V00 95,20 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 31

33 4 Water meters 4.2 Q water 4 - Mechanical screw-type water meters incl. Q module 5.5 Communication: Radio / S-mode und Mechanical water meter on-wall (single-jet) - with mounted and parameterised radio add-on module - for integration into the Q AMR or Q walk-by system (S-Mode) - Standard version: Due date (additional options are possible on request or can be changed onsite with the Q suite 5 software) - Dry runner, impeller wheel - MID approval - S-Mode features see page 1 - switch from S to C mode possible Radio transmission compatible with water meters incl. WFZ166.MO and WFZ16.MO, mixed operation possible! Please note! Excluded from calibration (formerly re-calibration) and buyback. Supplied in batches of 20 pieces. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Permanent flow rate Q₃ 2.5 m³/h - Connection thread G 3/4" (ISO 228) - Nominal width 15 (DN) Installation length 80 mm max. 30 C water temperature 5P 1 WMM5-000N ,00 max. 90 C water temperature 5P 1 WMM5-001N ,00 Installation length 110 mm max. 30 C water temperature 5P 1 WMM5-000N ,00 max. 90 C water temperature 5P 1 WMM5-001N ,00 Permanent flow rate Q₃ 4.0 m³/h - Connection thread G 1" (ISO 228) - Nominal width 20 (DN) Installation length 130 mm max. 30 C water temperature 5P 1 WMM5-000N ,00 max. 90 C water temperature 5P 1 WMM5-001N ,00 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 32

34 4 Water meters 4.2 Q wtaer 4 - Mechanical screw-type water meters incl. Q module 5.5 Communication: Radio / C-mode und Mechanical water meter on-wall (single-jet) - with mounted and parameterised radio add-on module - for integration into the Q AMR or Q walk-by system (C-Mode) - Standard version: Due date (additional options are possible on request or can be changed onsite with the Q suite 5 software) - Dry runner, impeller wheel - MID approval - C-Mode features see page 1 - switch from C to S mode possible Radio transmission compatible with walk-by installations with WFZ166.MO, mixed operations possible (read-out requirements: Q log current ACT46). Please note! Excluded from calibration (formerly re-calibration) and buyback. Supplied in batches of 20 pieces. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Permanent flow rate Q₃ 2.5 m³/h - Connection thread G 3/4" (ISO 228) - Nominal width 15 (DN) Installation length 80 mm max. 30 C water temperature 5P 1 WMM5-000T ,00 max. 90 C water temperature 5P 1 WMM5-001T ,00 Installation length 110 mm max. 30 C water temperature 5P 1 WMM5-000T ,00 max. 90 C water temperature 5P 1 WMM5-001T ,00 Permanent flow rate Q₃ 4.0 m³/h - Connection thread G 1" (ISO 228) - Nominal width 20 (DN) Installation length 130 mm max. 30 C water temperature 5P 1 WMM5-000T ,00 max. 90 C water temperature 5P 1 WMM5-001T ,00 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 33

35 4 Water meters 4.3 Q water 4 - Mechanical screw-type water meters Communication: basic Mechanical water meter on-wall (single-jet) - Dry runner, impeller wheel - Module shaft for retrofitting external communication modules - MID approval ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Permanent flow rate Q₃ 2.5 m³/h - Connection thread G 3/4" (ISO 228) - Nominal width 15 (DN) Installation length 80 mm Q water 4 (WEH) - max. 30 C water temperature MA 1 WFK30.D080 36,90 Q water 4 (WEH) - max. 90 C water temperature MA 1 WFW30.D080 36,90 Q water 4 (MAD) - max. 30 C water temperature MA 1 WMMH Z1V00 30,40 Q water 4 (MAD) - max. 90 C water temperature MA 1 WMMH Z1V00 30,40 Installation length 110 mm Q water 4 (WEH) - max. 30 C water temperature MA 1 WFK30.D110 36,90 Q water 4 (WEH) - max. 90 C water temperature MA 1 WFW30.D110 36,90 Q water 4 (MAD) - max. 30 C water temperature MA 1 WMMH Z1V00 30,40 Q water 4 (MAD) - max. 90 C water temperature MA 1 WMMH Z1V00 30,40 Permanent flow rate Q₃ 4.0 m³/h - Connection thread G 1" (ISO 228) - Nominal width 20 (DN) Installation length 130 mm Q water 4 (WEH) - max. 30 C water temperature MA 1 WFK30.E130 49,10 Q water 4 (WEH) - max. 90 C water temperature MA 1 WFW30.E130 49,10 Q water 4 (MAD) - max. 30 C water temperature MA 1 WMMH Z1V00 44,60 Q water 4 (MAD) - max. 90 C water temperature MA 1 WMMH Z1V00 44,60 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 34

36 4 Water meters 4.4 Q water Electronic measuring capsule water meters The new water meter generation from QUNDIS provides both screw-type and capsule meters. Thanks to a great selection of measuring capsule versions for the most common connection interfaces from all major manufacturers, nearly every installation situation can be handled. With the improved radio performance and the flexibility during readout, the Q water 5.5 is setting new standards. Product details: - MID-compliant screw-type and measuring capsule water meter (precision classes R80 horizontal /R40 vertical) - Easy fitting thanks to a plastic capsule seal and automatic radio activation - No parameterising required - High device protection level (IP68) - IrDA-interface for readout and parameterisation of the water meter rotatable calculator unit with 8-digit LC display - Horizontal and vertical installation possible - Counts forwards and backwards - Leaks are reported - Electronic scanning makes tampering impossible - Saving of 13 monthly values Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 35

37 4 Water meters 4.4 Q water Electronic measuring capsule water meters Communication: Radio / S-mode und - S-mode features see page 1 - switch from S to C mode possible ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Connection interface IST (Ista) - Connection thread G 2" - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N V00 95,20 max. 90 C water temperature MF 1 WME5-001N V00 95,20 Connection interface A34 (Allmess) - Connection thread M77 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N V00 95,20 max. 90 C water temperature MF 1 WME5-001N V00 95,20 Connection interface TE1 (Techem) - Connection thread M62 x 2 - Permanent flow rate Q₃ 2,5 m³/h max. 30 C water temperature MF 1 WME5-000N V00 95,20 max. 90 C water temperature MF 1 WME5-001N V00 95,20 Note: The Q water connection interface TE1 - is not compatible with the original thrust tubes and covers. Suitable hrust tubes and covers can be found in our digital accessories price list. Connection interface MOC/MOE (Elster/ABB) - Connection thread M65 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-A111 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-A111 00V00 95,20 Connection interface MET (Brunata/Metrona HT3) - Connection thread M64 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-C111 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-C111 00V00 95,20 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 36

38 4 Water meters 4.4 Q water Electronic measuring capsule water meters Communication: Radio / S-mode und Connection interface HT2 (Brunata HT2/Metrona 307) - Connection thread M66 x 1 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-E011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-E011 00V00 95,20 Connection interface MB3 (Minol) - Connection thread M76 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-J011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-J011 00V00 95,20 Connection interface DM1 (Deltamess TK) - Connection thread M60 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-T011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-T011 00V00 95,20 Connection interface MUK (Sensus PolluMUK) - Connection thread G2 1/4" - Permanent flow rate Q ₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-V011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-V011 00V00 95,20 Connection interface WE1 (Wehrle) - Connection thread M78 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-W011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-W011 00V00 95,20 Connection interface WGU (Wassergeräte) - Connection thread M66 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000N-X011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001N-X011 00V00 95,20 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 37

39 4 Water meters 4.4 Q water Electronic measuring capsule water meters Communication: Radio / C-mode und - C-mode features see page 1 - switch from C to S mode possible ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Connection interface IST (Ista) - Connection thread G 2" - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T V00 95,20 max. 90 C water temperature MF 1 WME5-001T V00 95,20 Connection interface A34 (Allmess) - Connection thread M77 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T V00 95,20 max. 90 C water temperature MF 1 WME5-001T V00 95,20 Connection interface TE1 (Techem) - Connection thread M62 x 2 - Permanent flow rate Q₃ 2,5 m³/h max. 30 C water temperature MF 1 WME5-000T V00 95,20 max. 90 C water temperature MF 1 WME5-001T V00 95,20 Note: The Q water connection interface TE1 - is not compatible with the original thrust tubes and covers. Suitable hrust tubes and covers can be found in our digital accessories price list. Connection interface MOC/MOE (Elster/ABB) - Connection thread M65 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-A111 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-A111 00V00 95,20 Connection interface MET (Brunata/Metrona HT3) - Connection thread M64 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-C111 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-C111 00V00 95,20 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 38

40 4 Water meters 4.4 Q water Electronic measuring capsule water meters Communication: Radio / C-mode und Connection interface HT2 (Brunata HT2/Metrona 307) - Connection thread M66 x 1 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-E011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-E011 00V00 95,20 Connection interface MB3 (Minol) - Connection thread M76 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-J011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-J011 00V00 95,20 Connection interface DM1 (Deltamess TK) - Connection thread M60 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-T011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-T011 00V00 95,20 Connection interface MUK (Sensus PolluMUK) - Connection thread G2 1/4" - Permanent flow rate Q ₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-V011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-V011 00V00 95,20 Connection interface WE1 (Wehrle) - Connection thread M78 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-W011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-W011 00V00 95,20 Connection interface WGU (Wassergeräte) - Connection thread M66 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MF 1 WME5-000T-X011 00V00 95,20 max. 90 C water temperature MF 1 WME5-001T-X011 00V00 95,20 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 39

41 4 Water meters 4.5 Q water 4 - Mechanical measuring capsule water meters incl. Q module 5.5 Communication: Radio / S-mode und Mechanical water meter measuring capsule - with mounted and parameterised radio add-on module - for integration into the Q walk-by System or Q AMR System (S-mode) - Standard version: Due date (additional options are possible on request or can be changed onsite with the Q suite 5 software) - Dry runner, impeller wheel - MID approval - S-Mode features see page 1 - switch from S to C mode possible Radio transmission compatible with water meters incl. WFZ166.MO and WFZ16.MO, mixed operation possible! Please note! Excluded from calibration (formerly re-calibration) and buyback. Supplied in batches of 20 pieces. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Permanent flow rate Q₃ 2.5 m³/h Connection interface IST (Ista) - Connection thread G 2" - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000N ,00 max. 90 C water temperature 5P 1 WMM5-001N ,00 Connection interface A34 (Allmess) - Connection thread M77 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000N ,00 max. 90 C water temperature 5P 1 WMM5-001N ,00 Connection interface MOC/MOE (Elster/ABB) - Connection thread M65 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000N-A ,00 max. 90 C water temperature 5P 1 WMM5-001N-A ,00 Connection interface MET (Brunata/Metrona HT3)- Connection thread M64 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000N-C ,00 max. 90 C water temperature 5P 1 WMM5-001N-C ,00 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 40

42 4 Water meters 4.5 Q water 4 - Mechanical measuring capsule water meters incl. Q module 5.5 Communication: Radio / C-mode und Mechanical water meter measuring capsule - with mounted and parameterised radio add-on module - for integration into the Q walk-by System or Q AMR System (C-mode) - Standard version: Due date (additional options are possible on request or can be changed onsite with the Q suite 5 software) - Dry runner, impeller wheel - MID approval - C-Mode features see page 1 - switch from C to S mode possible Radio transmission compatible with walk-by installations with WFZ166.MO, mixed operations possible (read-out requirements: Q log current ACT46). Please note! Excluded from calibration (formerly re-calibration) and buyback. Supplied in batches of 20 pieces. ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Permanent flow rate Q₃ 2.5 m 3 /h Connection interface IST (Ista) - Connection thread G 2" - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000T ,00 max. 90 C water temperature 5P 1 WMM5-001T ,00 Connection interface A34 (Allmess) - Connection thread M77 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000T ,00 max. 90 C water temperature 5P 1 WMM5-001T ,00 Connection interface MOC/MOE (Elster/ABB) - Connection thread M65 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000T-A ,00 max. 90 C water temperature 5P 1 WMM5-001T-A ,00 Connection interface MET (Brunata/Metrona HT3)- Connection thread M64 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature 5P 1 WMM5-000T-C ,00 max. 90 C water temperature 5P 1 WMM5-001T-C ,00 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 41

43 4 Water meters 4.6 Q water 4 - Mechanical measuring capsule water meters Communication: basic Mechanical water meter measuring capsule - Dry runner, impeller wheel - module shaft for retrofitting external communication modules - MID approval ALL PRICES INCL. FIXED FEE, CONFORMITY ASSESSMENT. Connection interface IST (Ista)- Connection thread G 2" - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMK10.D 40,85 max. 90 C water temperature MD 1 WMW10.D 40,85 Connection interface A34 (Allmess) - Connection thread M77 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMK10.D/ALL 51,90 max. 90 C water temperature MD 1 WMW10.D/ALL 51,90 Connection interface TE1 (Techem) - Connection thread M62 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM V00 51,90 max. 90 C water temperature MD 1 WMM V00 51,90 Connection interface MOC/MOE (Elster/ABB) - Connection thread M65 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMK10.D/ABB 41,85 max. 90 C water temperature MD 1 WMW10.D/ABB 41,85 Connection interface MET (Brunata/Metrona HT3) - Connection thread M64 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMK10.D/MET 50,00 max. 90 C water temperature MD 1 WMW10.D/MET 50,00 Connection interface HT2 (Brunata HT2/Metrona 307)- Connection thread M66 x 1 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM E001 00V00 62,10 max. 90 C water temperature MD 1 WMM E001 00V00 62,10 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 42

44 4 Water meters 4.6 Q water 4 - Mechanical measuring capsule water meters Communication: basic Connection interface MB3 (Minol) - Connection thread M76 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM J001 00V00 71,90 max. 90 C water temperature MD 1 WMM J001 00V00 71,90 Connection interface MB2 (Minol) - Connection thread M80 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM G001 00V00 71,90 max. 90 C water temperature MD 1 WMM G001 00V00 71,90 Connection interface DM1 (Deltamess TK) - Connection thread M60 x 2 - Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM T001 00V00 62,10 max. 90 C water temperature MD 1 WMM T001 00V00 62,10 Connection interface MUK (Sensus PolluMUK)- Connection thread G2 1/4" - Permanent flow rate Q ₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM V001 00V00 51,90 max. 90 C water temperature MD 1 WMM V001 00V00 51,90 Connection interface WE1 (Wehrle)- Connection thread M78 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM W001 00V00 63,90 max. 90 C water temperature MD 1 WMM W001 00V00 63,90 Connection interface WGU (Wassergeräte) - Connection thread M66 x Permanent flow rate Q₃ 2.5 m³/h max. 30 C water temperature MD 1 WMM X001 00V00 62,10 max. 90 C water temperature MD 1 WMM X001 00V00 62,10 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 43

45 4 Water meters 4.7 Q water Electronic valve- and bath meters The new electronic valve and bath meters include a connection kit for valve or bath meters as well as a Q water 5.5 IST. That means the new connection kits can be combined with every version of the Q water 5.5 with connection interface IST and connection thread G2" (S-Mode, C-Mode, hot, cold). Valve meter-connection kit for Q water 5.5 (new installation) Valve meter connection kit for electronic water meter Q water with connection interface IST - connection thread G 2" - permanent flow rate Q₃ 2.5 m³/h The connection kit includes: - Chrome-plated valve meter fittings - Centre section - Chrome-plated connection housing - Accessories for installing of the valve meter (seals, O-rings, etc.) Please note: The Q water 5.5 is not part of the connection kit. Please find the matching Q water 5.5 with connection interface IST - connection thread G 2" - permanent flow Q₃ 2.5 m³/h on page 36 (S-Mode) and page 38 (C-Mode) in the device price list. Connection set and extensions as well as rosettes are not included in the scope of the valve meter connection kit (new installation). They can be found in the accessories price list. Valve meter connection kit for Q water 5.5 5G 1 BBV ,10 Bath meter-connection kit for Q water 5.5 (new installation) Bath meter connection kit for electronic water meter Q water with connection interface IST - connection thread G 2" - permanent flow rate Q₃ 2.5 m³/h The connection kit includes: - Chrome-plated bath meter fittings - Centre section - Chrome-plated connection housing - Accessories for installing of the bath meter (seals, O-rings, etc.) Please note: The Q water 5.5 is not part of the connection kit. Please find the matching Q water 5.5 with connection interface IST - connection thread G 2" - permanent flow Q₃ 2.5 m³/h on page 36 (S-Mode) and page 38 (C-Mode) in the device price list. Bath meter connection kit for Q water 5.5 5G 1 BBV ,40 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 44

46 4 Water meters 4.7 Q water Electronic valve- and bath meters Replacement connection kit for valve and bath meter for Q water 5.5 Replacement connection kit for electronic water meter Q water with connection interface IST - connection thread G 2" - permanent flow rate Q₃ 2.5 m³/h for the replacement of electronic valve and bath meters from QUNDIS of the WMx36.DVN series The connection kit includes: - Chrome-plated connection housing - Centre section - Accessories for installing of the connection kit (seals, O-rings, etc.) Please note: The Q water 5.5 is not part of the connection kit. Please find the matching Q water 5.5 with connection interface IST - connection thread G 2" - permanent flow Q₃ 2.5 m³/h on page 36 (S-Mode) and page 38 (C-Mode) in the device price list. Replacement connection kit for Q water 5.5 5G 1 BBV ,10 Hot water cost allocator connection kit for Q water 5.5 Hot water cost allocator connection kit for existing retrofitted hot water cost allocators. The connection housing takes up the space of the TZ90 and is designed for mounting of a Q water 5.5 with connection interface IST and connection thread G2 The connection kit includes: - Chrome-plated connection housing - Accessories for installing of the connection kit Please note: The Q water 5.5 is not part of the connection kit. Please find the matching Q water 5.5 with connection interface IST - connection thread G 2" - permanent flow Q₃ 2.5 m³/h on page 36 (S-Mode) and page 38 (C-Mode) in the device price list. Hot water cost allocator connection kit for Q water 5.5 5G 1 BBV ,10 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 4, page 45

47 5 Smoke detector Smoke detectors serve to detect and signal the development of smoke and/or heat. DIN the application standard for smoke detectors - regulates the planning, installation, operation and servicing of smoke detectors in residential houses, flats and rooms used for residence purposes on the (German) national level. DIN EN is the European product standard for smoke detectors. This describes the performance criteria and test methods used for the devices. In Germany, the obligation to equip residential buildings with smoke alarms is regulated by the building laws of the different regional states. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 5, page 47

48 5 Smoke detector 5.1 Q smoke - Smoke detector standalone - Hekatron Genius H-N The Q smoke Genius H smoke alarm alerts early-on and reliably during smouldering fires and open flames with smoke development. The intelligent evaluation electronics prevents false alarms and efficient battery management makes battery service lives of 10 years possible. Product details: - 85 db alarm signal at a distance of 3 m - User-friendly test stop button - Permanently installed lithium battery for a service life of 10 years (removal of battery not possible) - Automatic self-monitoring - Active contamination prediction - Alarm memory - Electronic dismantling detection - Made in Germany Communication: basic Smoke detector standalone - Genius H-N incl. mounting material Please note: You can only order the radio smoke detector in batch sizes of 30 pieces. Standalone Genius H-N, sale and delivery in packing units of 30 units each H1 1 PU SDT5-ZZ ,70 Installation material Suitable installation material can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 5, page 48

49 5 Smoke detector 5.2 Q smoke Smoke detector radio The new radio smoke detector Q smoke 5.5 ranks among the high-quality products on the smoke detector market. It unifies innovative electronics with comprehensive functions, minimum device size and the highest degree of reliability. Thanks to an integrated radio module the unit status and any possible status messages can be checked at any time. The 3-colour LED display provides information on the device status to the tenant on site. Product details: - Automatic operability after screwing into the socket - 85 db alarm signal at a distance of 3 m - User friendly test stop button - Permanently installed lithium battery for a service life of 10 years (removal of battery not possible) - Suitable for bedrooms thanks to LED deactivation and suppression of the status messages from 9 pm to 7 am - Contamination compensation and contamination prediction - Transmission of the device status via radio through Q walk-by or Q AMR into the Smart-Metering Platform (Q SMP) - Comprehensive evaluation facilities of the device status Communication: AMR / S-mode S-mode features - transmission of AMR data telegrams - every 4 hours, 24 hours a day - switch from S to C mode not possible The send mode is preconfigured at the factory based on the order and cannot be changed later onsite. Incl. mounting material. Please note: You can only order the radio smoke detector in batch sizes of 30 pieces. Radio (S-mode AMR), sale and delivery in packing units of 30 units each H2 1 PU SDT ,70 Communication: Radio / C-mode und - C-mode features see page 1 - switch from C to S mode not possible The send mode is preconfigured at the factory based on the order and cannot be changed later onsite. Incl. mounting material. Please note: You can only order the radio smoke detector in batch sizes of 30 pieces. Radio (C-mode), sale and delivery in packing units of 30 units each H2 1 PU SDT ,70 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 5, page 49

50 6 Further system components data readout walk-by walk-by recording of consumption data AMR wireless readout of consumption data Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 6, page 51

51 6 Further system components data readout 6.1 Q module Add-on radio module for mechanical water meters Communication: Radio / S-mode und Radio add-on modules suitable for radio prepared water meters of type Modularis (suitable for Q water 4 mechanical water meters) Standard version: Due date (additional options are possible on request or can be changed onsite with the Q suite 5 software) - S-Mode features see page 1 - switch from S to C mode possible Radio transmission compatible with WFZ166.MO and WFZ16.MO, mixed operation possible! Please note! Supplied in batches of 10 pieces. Radio (S-mode) 5T 1 RWM5-000N ,50 Communication: Funk / C-Mode und Radio add-on modules suitable for radio prepared water meters of type Modularis (suitable for Q water 4 mechanical water meters) Standard version: Due date (additional options are possible on request or can be changed onsite with the Q suite 5 software) - C-mode features see page 1 - switch from C to S mode possible Radio transmission (walk-by) compatible with WFZ166.MO, mixed operation possible! (read-out requirements: Q log current ACT46). Please note! Supplied in batches of 10 pieces. Radio (C-mode) 5T 1 RWM5-000T ,50 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 6, page 52

52 6 Further system components data readout 6.1 Q module 5 - Add-on radio module for mechanical water meters Communication: walk-by / S-mode Radio add-on modules suitable for radio prepared water meters of type Allmess (suitable for series MK +m, V +m) Parameter setting through software ACT20 walk-by (S-mode); 10pcs. per package unit walk-by (S-mode); single package unit 5T 1 PU WFZ166.AL 713,00 5T 1 WFZ166.AL-1 74,20 Communication: AMR / S-mode Radio add-on modules suitable for radio prepared water meters of type Allmess (suitable for series MK +m, V +m) Parameter setting through software ACT20 AMR (S-mode); 10pcs. per package unit AMR (S-mode); single package unit 5T 1 PU WFZ16.AL 713,00 5T 1 WFZ16.AL-1 74,20 Additional modules for radio prepared mechanical water meters on request. Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 6, page 53

53 6 Further system components data readout 6.2 Q module Radio add-on module for heat meters Communication: Radio / S-mode und Radio add-on module suitable for heat meters of the series Q heat 5 and calculator units R 20/21 The serial number, consumption and due date values are readout of the heat meter directly via an optical interface, which means parameter setting is not required for these data. - S-Mode features see page 1 - switch from S to C mode possible Radio transmission compatible with WFZ166.Ox and WFZ16.Ox, mixed operation possible! Please note! Supplied in batches of 10 pieces. Radio (S-mode) 5U 1 RHM5-00AN-0000 Z ,80 Communication: Radio / C-mode und Radio add-on module suitable for heat meters of the series Q heat 5 and calculator units R 20/21 The serial number, consumption and due date values are readout of the heat meter directly via an optical interface, which means parameter setting is not required for these data. - C-Mode features see page 1 - switch from C to S mode possible Radio transmission (walk-by) compatible with WFZ166.Ox, mixed operation possible! (read-out requirements: Q log current ACT46). Please note! Supplied in batches of 10 pieces. Radio (C-mode) 5U 1 RHM5-00AT-0000 Z ,80 Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 6, page 54

54 6 Further system components data readout 6.3 Q pulse - Pulse adapter Communication: walk-by / S-mode Impulse adapter for the integration of consumption meters with impulse output in the walk-by system suitable for meters with impulse output from different manufacturers; two meters can be connected Manipulation detection, if impulse acquisition is interrupted or short-circuited. This function must be supported by the consumption meter connected (NAMUR). Water meters, heat meters, heat/cold meters, gas meters, steam meters, oil meters with impulse output and electric meters with S0 interface can be recorded (impulse converter required). walk-by (S-mode); Impulse adapter MK 1 AEW ,90 Communication: AMR / S-mode Impulse adapter for the integration of consumption meters with impulse output in the AMR system suitable for meters with impulse output from different manufacturers; two meters can be connected Manipulation detection, if impulse acquisition is interrupted or short-circuited. This function must be supported by the consumption meter connected (NAMUR). Water meters, heat meters, heat/cold meters, gas meters, steam meters, oil meters with impulse output and electric meters with S0 interface can be recorded (impulse converter required). AMR (S-mode); Impulse adapter MK 1 AEW ,00 Application Software and Service Tools Application Software and Service Tools can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 6, page 55

55 7 Further system components data readout Q AMR 7.1 Q node 5 - Network nodes Communication: AMR / S-mode The network nodes Q node 5 come with an improved antenna capacity. This means that data from more consumption metering devices can be received even in difficult wireless conditions. An building-dependent reduction of the number of nodes per property is also possible. Q node 5 is compatible with existing network nodes and gateways of the series WTx16 and gateways of the series Q gateway 5. Local readout possible through the USB programming adapter RNNP-H or through the M-bus interface and, in the RNN5-000M version, also through the RS232 interface. Please note: The Q node 5 currently receives radio telegrams in S-mode. Q node 5 with battery supply Q node 5 with power supply and RS232 interface 5X 1 RNN5-000M ,50 5X 1 RNN5-000M , Q gateway 5 - Gateways Communication: AMR The function of the new Q gateway 5 is the remote readout of a Q AMR network, combining fully automatic remote data readout operations with the monitoring of metering devices and the overall system. The Q gateway 5 can read out up to metering devices and multiple AMR networks. Data transmission is by mobile communication (GPRS/EDGE/UMTS/HSPA). The Q gateway 5 is supplied ex works with a SIM card. All administrative and data recording operations are managed via the QUNDIS Smart Metering Platform (Q SMP). Please note: The Q gateway 5 is sold only in combination with a QUNDIS Gateway Service (GSD) contract for a minimum contractual period of five years. Q gateway 5 with battery supply Q gateway 5 with power supply 5Y 1 RNG5-N00R x 490,00 5Y 1 RNG5-N00R x 590,00 Application Software and Service Tools Application Software and Service Tools can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 7, page 56

56 7 Further system components data readout Q AMR 7.3 Overview of tariffs Gateway Service Description (GSD) data supply - twice per month data supply - once a week data supply - daily Qty. Part no. Price ( ) / year 1 QGW-A ,88 1 QGW-A ,88 1 QGW-A ,88 You will find the corresponding descriptions of features in the QUNDIS Download Center (QDC). 7.4 The solution package for small Q AMR systems (max. 80 devices) - Readout of max. 80 metering devices from 1 AMR network - Data delivery 1 x per month (tariff: QGW-A ) for an annual price of One Q gateway 5 as well as one Q node 5 for the package price - Upgrade to standard tariff possible if max. number of devices is exceeded - Minimum contract period 5 years Q gateway 5 + Q node 5 for small systems data supply - once a month / price per year 5Y 1 RNG5-N00R ,00 1 QGW-A ,00 You will find the corresponding description of features in the QUNDIS Download Center (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 7, page 57

57 8 Further system components data readout Q M-Bus Q M-Bus systems are used for recording consumption data primarily from heat meters and water meters. Compared to radio systems, wired systems make sense wherever meters have to transmit instantaneous values or where a few meters for central recording are spread over a large area. In addition to the actual meters for heat and water, QUNDIS also supplies impulse input modules that provide data from devices with an impulse output for the Q M-Bus system. Central units, level converters and remote displays round off the product range. wired remote meter readout Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 8, page 59

58 8 Further system components data readout Q M-Bus 8.1 Q module - M-Bus - Add-on module for mechanical water meter M-Bus-modul for mechanical water meters of type Modularis (suitable for Q water 4 mechanical water meters) M-Bus-add-on module MK 1 MWMH Z0V10 49, Q module - M-Bus - Add-on modules for heat meters M-Bus modul for heat meter suitable for heat meters of the series Q heat 5 and calculator units R 20/21 (Heat meter with integrated M-bus module, see chapter 2.3) M-Bus-add-on module MK 1 MHM5-00A ,15 M-Bus-add-on module with extended data telegram MK 1 MHM5-00A , Q pulse - M-Bus - impulse input module M-Bus-impulse input module with two inputs for the connection of up to two metering devices with impulse output (Reed contact with or without Namur circuitry), e.g. suitable for gas, water or oil meters The M-Bus Connection set included in the scope of supply. with 2 inputs B1 1 AEW ,00 Application Software and Service Tools Application Software and Service Tools can be found in our digital accessories price list (PDF) at in the section service/downloads-and-information/product-information and in Excel format in the Customer Centre (QDC). Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 8, page 60

59 9 General terms and conditions 9.1 General terms and conditions Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 9, page 61

60 9.1 General terms and conditions Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 9, page 62

61 9.1 General terms and conditions Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 9, page 63

62 9.1 General terms and conditions Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 9, page 64

63 9.1 General terms and conditions Our conditions of delivery and installation apply, subject to error and change, the prices do not include VAT chapter 9, page 65