2004 Product Catalogue

Transcription

1 2004 Product Catalogue

2 contents Product Index II Microphones 1 Artist Elite 2 40 Series 4 30 Series 7 Artist Series 9 Midnight Blues 12 KitPak 13 Pro Series 14 Adaptive Array, Delta Beam 15 Broadcast & Production 16 ProPoint 20 UniPoint 21 Engineered Sound Gooseneck Microphones 24 Interchangeable Elements 25 Rigid-pipe Microphones 26 Dual-element Microphones 26 Hanging Microphones 27 Boundary Microphones 28 Lavalier Microphones 29 Handheld Microphones 29 Wireless Systems Artist Elite 4000 & 5000 Series Series Series Series 35 Wireless Essentials 36 Wireless Accessories 37 Headphones Precision Studiophones 38 Headphones and Headsets 39 Electronics SmartMixer Automatic Mixers 40 Phantom Power Supplies 41 In-Line Accessories, UniTools 41 Microphone Accessories Microphone Mounts 42 Windscreens 44 Consumer Microphones ATR Microphones 46 Phono Cartridges Standard Series Cartridges 47 Audiophile Series Cartridges 47 Professional Series Cartridges 47 Replacement Styli 47 Alphanumeric Product Listing 48 Terms, Sales Policies & Limited Warranty III

3 a message from the president 1 Welcome to the first issue of our European Catalogue. With its publication, we are delighted to offer our European colleagues a better service by providing product descriptions and technical specifications in no less than eight languages. At Audio-Technica, our work begins with transducers, the interface between people and the equipment that captures, transports and delivers audio communication. When designing these products highperformance s, headphones, wireless systems, mixers and more we push the limits of the laws of physics to create the highest performance possible at prices that make our products widely accessible. We are proud to have earned recognition for these leading innovations in electro-acoustic design and manufacturing. We are equally pleased to be recognized as a company that benefits both our customers and our communities: we are committed to supporting the music, broadcast, entertainment and communication industries in which our end-users work. In 2002, as we celebrated our 40th anniversary, Audio-Technica supplied approximately 2000 s during the Winter Games in Salt Lake City. A-T s delivered outstanding performance despite the extreme challenges of on-site coverage of events like luge, skiing, biathlon, skating and more. Two years later and 60 Celsius higher, we are committed to doing our part for the Summer Games as we did in Atlanta (1996) and Sydney (2000). In August of 2004, we will support broadcasting in Athens by supplying more than 1600 s and associated technical support. To all who use our products: we are committed to meeting your needs and helping improve your performance. To all our dealers and distributors: we are dedicated to supplying your business and your customers with outstanding products and support. Wherever you do business, don t hesitate to contact us for further product innovations, for information and expertise. Whatever your needs, please be assured, at Audio-Technica, we are... always listening. Kazuo Matsushita President

4 2 artist elite s ( PC 304-MC 220) CONDENSER VOCAL MICROPHONES AE Cardioid condenser Pristine sound quality demanded by the most discriminating user. Large-diaphragm element and true condenser design. Superior anti-shock engineering ensures low handling noise and quiet performance. Excellent protection against plosives and sibilance without compromising high-frequency clarity. Robust design for enduring dependability on the road. Integral 80 Hz HPF switch and 10 db pad. AE Cardioid condenser Exacting detail, brilliant clarity and uncoloured realism. Well-tempered polar pattern with outstanding rejection qualities. Superior anti-shock engineering ensures low handling noise and quiet performance. Excellent protection against plosives and sibilance without compromising high-frequency clarity. Robust design for enduring dependability on the road. Integral 80 Hz HPF switch and 10 db pad. DYNAMIC VOCAL MICROPHONES AE Hypercardioid dynamic Great presence with excellent monitor cut High output, fast transients and clean articulation Maximum feedback rejection Superior anti-shock engineering for low handling noise Outstanding pop protection Tough, durable, resilient built for the road AE Cardioid dynamic Aggressive sound that stays up-front in the mix Optimized for the stage with excellent isolation properties Superior anti-shock engineering for low handling noise Outstanding pop protection Tough, durable, resilient built for the road AE3300, AE5400 AE4100, AE6100 Specifications AE5400 AE3300 AE6100 AE4100 Element Externally polarized condenser Electret condenser Dynamic Dynamic Polar Pattern Cardioid Cardioid Hypercardioid Cardioid Frequency Response 20-20,000 Hz 30-18,000 Hz 60-15,000 Hz 90-18,000 Hz Open Circuit Sensitivity 40 db (10.0 mv) 42 db (7.9 mv) 55 db (1.7 mv) 55 db (1.7 mv) Impedance 150 Ω 150 Ω 250 Ω 250 Ω Maximum Input Sound Level 147 db SPL 147 db SPL 1 khz at 1% T.H.D. 157 db SPL, with 10 db pad 157 db SPL, with 10 db pad Signal-to-Noise Ratio * 80 db 75 db Dynamic Range (1 khz) 133 db 128 db Noise 14 db SPL 19 db SPL Low Frequency Roll-Off 80 Hz, 12 db/octave 80 Hz, 12 db/octave Phantom Power Requirements 11-52V DC, 4 ma 11-52V DC, 3 ma Weight (less accessories) 330 g (11.6 oz) 300 g (10.6 oz) 310 g (10.9 oz) 310 g (10.9 oz) Dimensions 179 mm (7.05 ) long; 179 mm (7.05 ) long; 177 mm (6.97 ) long; 177 mm (6.97 ) long; 50 mm (1.97 ) diameter 50 mm (1.97 ) diameter 48 mm (1.89 ) diameter 48 mm (1.89 ) diameter Output Connector 3-pin XLRM-type 3-pin XLRM-type 3-pin XLRM-type 3-pin XLRM-type Accessories Furnished AT8470 Quiet-Flex AT8470 Quiet-Flex AT8470 Quiet-Flex AT8470 Quiet-Flex stand clamp, stand clamp, stand clamp, stand clamp, soft protective pouch soft protective pouch soft protective pouch soft protective pouch 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL *Typical, A-weighted European professional price guide 2004, prices in Euro EX-VAT 1

5 3 AE Dual-element cardioid Revolutionary, first-of-its-kind dual-element design represents a ground-breaking transducer achievement. Two elements (condenser and dynamic) are enclosed in a single housing. Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell. Elements are positioned in a perfect phase relationship, something practically unachievable with two separate s. Robust design for enduring dependability on the road. Integral 80 Hz HPF switch and 10 db pad. AE Cardioid condenser Excels in high-spl applications such as guitar cabinets, toms, snare, timpani and overheads. Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound. Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source. Robust design for enduring dependability on the road. Integral 80 Hz HPF switch and 10 db pad. AE2500 AE Cardioid condenser Uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments. Large-diaphragm capsule delivers accurate, uncoloured and extremely natural response. Low-profile design permits innovative placement options previously unattainable with a large-diaphragm condenser. Robust design for enduring dependability on the road. Integral 80 Hz HPF switch and 10 db pad. AE3000 AE5100 Specifications AE2500 AE3000 AE5100 Element Condenser, Dynamic Condenser Condenser Polar Pattern Cardioid Cardioid Cardioid Frequency Response Dynamic : 30-10,000 Hz 20-20,000 Hz 20-20,000 Hz Condenser : 20-17,000 Hz Open Circuit Sensitivity Dynamic : 54 db (1.9 mv) 43 db (7 mv) 36 db (15.8 mv) Condenser : 51 db (2.8 mv) Impedance Dynamic : 600 Ω Condenser : 100 Ω 100 Ω 150 Ω Maximum Input Sound Level Condenser : 148 db SPL 148 db SPL 148 db SPL 1 khz,t.h.d. 1% 158 db SPL, with 10 db pad 158 db SPL, with 10 db pad 158 db SPL, with 10 db pad Signal-to-Noise Ratio (1 khz, 1 Pa) Condenser : 70 db 83 db 83 db Dynamic Range (1 khz) Condenser : 124 db 137 db 137 db Low Frequency Roll-Off 80 Hz, 12 db/octave 80 Hz, 12 db/octave 80 Hz, 12 db/octave Power Requirement 11-52V DC, 3 ma 11-52V DC, 3 ma 11-52V DC, 3.2 ma Weight (less accessories) 390 g (13.8 oz) 170 g (6.0 oz) 143 g (5.0 oz) Dimensions 165 mm (6.50 ) long mm (4.55 ) long L mm (5.85 ) long 55 mm (2.17 ) diameter 48 mm (1.89 ) diameter 26 mm (1.02 ) diameter Output Connector Integral 5-pin XLRM type Integral 3-pin XLRM type Integral 3-pin XLRM type Accessories Furnished Protective pouch Protective pouch Protective pouch AT8471 Isolation clamp AT8471 Isolation clamp AT8471 Isolation clamp 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL

6 4 40 series precision studio s ( PC 345-MC 210) The AT4033a s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals, even under high-output conditions. From vocals to drum overheads, from woodwind sections to guitar cabinets and on-air announcing, the AT4033a is a of many talents as useful on stage and in a broadcast facility as it is in the recording studio. AT4033aSM Cardioid condenser with shock mount A marriage of technical precision and artistic inspiration, the AT4040 features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. Designed as a multi-purpose performer, this externally polarized (DC bias) true condenser offers exceptionally low noise, wide dynamic range and high-spl capability for greatest versatility. The AT4040 s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals, even under high-output conditions. The is totally free of the distortion associated with conventional transformer-coupled outputs. AT4033aSM AT4040SM Cardioid condenser with shock mount Deemed the stuff legends are made of at its introduction, the AT4050 exhibits a remarkable combination of high SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. And numerous legendary studio engineers agree that it is the perfect studio tool for use on vocals, piano, strings, drum overheads, guitar amps, ensembles the list goes on and on. The externally polarized (DC bias) true condenser element of the AT4050 utilizes dual, gold-vaporized and aged, large diaphragms to provide consistent, superior performance in three switchable polar patterns (cardioid, omnidirectional and figure-of-eight). AT4040SM AT4050SM Multi-pattern condenser with AT8449 shock mount AT4050SC Multi-pattern condenser with AT8430 stand clamp AT4050SM Specifications AT4033aSM AT4040SM AT4050SM and AT4050SC Element Permanently polarized condenser Externally polarized condenser Externally polarized condenser Polar Pattern Cardioid Cardioid Cardioid, omnidirectional, figure-of-eight Frequency Response 30-20,000 Hz 20-20,000 Hz 20-18,000 Hz Open Circuit Sensitivity 32 db (25.1 mv) 32 db (25.1 mv) 36 db (15.8 mv) Impedance 100 Ω 100 Ω 100 Ω Maximum Input Sound Level 145 db SPL 145 db SPL 149 db SPL 1 khz,t.h.d. 1% 155 db SPL, with 10 db pad 155 db SPL, with 10 db pad 159 db SPL, with 10 db pad Signal-to-Noise Ratio 77 db (1 khz, 1 Pa) 82 db (1 khz, 1 Pa) 77 db (1 khz, 1 Pa) Dynamic Range 128 db, 1 khz at Max SPL 133 db, 1 khz at Max SPL 132 db, 1 khz at Max SPL Noise 17 db SPL 12 db SPL 17 db SPL Low Frequency Roll-Off 80 Hz, 12 db/octave 80 Hz, 12 db/octave 80 Hz, 12 db/octave Phantom Power Requirement 48V DC, 3.2 ma 48V DC, 4.2 ma 48V DC, 4.2 ma Weight (less accessories) 380 g (13.4 oz) 360 g (12.7 oz) 510 g (18.0 oz) Dimensions 170 mm (6.69 ) long 170 mm (6.69 ) long 188 mm (7.40 ) long 53,4 mm (2.10 ) diameter 53.4 mm (2.10 ) diameter 53.4 mm (2.10 ) diameter Output Connector Integral 3-pin XLRM type Integral 3-pin XLRM type Integral 3-pin XLRM type Accessories Furnished Protective carrying case Protective carrying case Protective carrying case AT8449 Shock mount AT8449 Shock mount AT8449 Shock mount (AT4050SM) AT8430 Stand clamp (AT4050SC) 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

7 5 The AT4047/SV is a large-diaphragm condenser designed to provide the warm sonic characteristics reminiscent of early F.E.T. studio designs. Wide dynamic range, high SPL capability and exceptionally low self-noise combine in a versatile tool that excels in digital recording environments. Also ideal for critical applications in broadcast and live sound, the precisionengineered AT4047/SV delivers the consistency and reliability expected of A-T s 40 Series. The AT4047/SV features a switchable 80 Hz hi-pass filter and 10 db pad. Both the and included AT8449/SV shock mount are provided in a vintage mattsilver finish. AT4047SVSM Cardioid condenser with AT8449SV shock mount AT4047SVSC Cardioid condenser with AT8430 stand clamp AT4047SVSM The AT4060 combines premium 40 Series engineering and vintage tube technology to deliver the exacting, versatile performance required in the most demanding studio applications. With a dynamic range that far exceeds that of other tube mics, the AT4060 provides the coveted sound of valve design without compromising the specification standards necessary to excel in today s diverse recording situations. The dual large-diaphragm element delivers extended frequency response, while the carefully controlled cardioid pattern maintains uniform off-axis response. Included with each AT4060 are the AT8560 power supply, the AT8447 shock mount, a 32 cable. AT Cardioid vacuum tube condenser with AT8447 shock mount AT4060 Specifications AT4047SV AT4060 Element Externally polarized (DC bias) condenser Externally polarized (DC bias) condenser Polar Pattern Cardioid Cardioid Frequency Response 20-18,000 khz 20-20,000 khz Open Circuit Sensitivity 35 db (17.7 mv) ± 2 db, re 1V at 1 Pa 34 db (19.9 mv) ± 2 db, re 1V at 1 Pa Impedance 250 Ω 200 Ω Maximum Input Sound Level 149 db SPL 150 db SPL 1 khz,t.h.d. 1% 159 db SPL, with 10 db pad Signal-to-Noise Ratio 85 db (1 khz at 1 Pa) 75 db (1 khz at 1 Pa) Dynamic Range 140 db (1 khz at Max SPL) 131 db (1 khz at 150 SPL) Noise 9 db SPL 19 db SPL Low Frequency Roll-Off 80 Hz, 12 db/octave Power Requirement Phantom 48 V, 3.0 ma AT8560 power supply (230 V AC) Weight (less accessories) 410 g (14.5 oz) 640 g (22.6 oz) Dimensions 170 (6.69 ) long mm (2.10 ) diameter 210 mm (8.27 ) long mm (2.10 ) diameter Output Connector Integral 3-pin XLRM type Integral 6-pin XLRM type Accessories Furnished AT8449SV Shock mount AT8447 Shock mount, AT8560 Power supply or AT8430 Stand clamp (with 4047SVSC) 10 m (32.8 ) cable, protective mic carrying case 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL

8 6 40 series precision studio s ( PC 345-MC 210 ) This premium electret condenser is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 features a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged housed in a case of turned brass with black chrome plating for durability and low reflectivity. AT Cardioid condenser These versatile studio performers may be used with confidence in a wide variety of professional miking applications, even under the stringent demands of modern digital recording systems. Featuring directcoupled balanced outputs for clean signals in high output conditions, the s are totally free of the distortion associated with conventional transformer-coupled outputs. Each consists of two modular subassemblies: the AT4900a-48 handle containing the s electronics, and a corresponding condenser head capsule (the omnidirectional AT4049a-EL, the cardioid AT4051a-EL or the hypercardioid AT4053a-EL). All head capsules are interchangeable and available separately. The housing is constructed of rugged turned brass with a low-reflective black chrome plating. AT4041 AT4049a Modular ominidirectional condenser AT4049a, AT4051a, AT4053a AT4051a Modular cardioid condenser AT4053a Modular hypercardioid condenser 40 SERIES MICROPHONE COMPONENTS AT4900a Electronics/body only AT4049a-EL Omnidirectional element only AT4051a-EL Cardioid element only AT4053a-EL Hypercardioid element only AT4049a-48 AT4049a-EL, AT4051a-EL, AT4053a-EL Specifications AT4041 AT4049a/AT4051a/AT4053a Element Permanently Polarized Condenser Externally Polarized (DC bias) Condenser Polar Pattern Cardioid Omnidirectional (AT4049a) Cardioid (AT4051a) Hypercardioid (AT4051a) Frequency Response 20-20,000 Hz 20-20,000 Hz Open Circuit Sensitivity 36 db (15.8 mv) 33 db (22.4 mv) AT4049a/AT4053a 34 db (19.9 mv) AT4051a Impedance 100 Ω 100 Ω Maximum Input Sound Level 145 db SPL, 1 khz at 1% T.H.D. 146 db SPL, 1 khz at 1% T.H.D. Signal-to-Noise Ratio 70 db (1 khz, 1 Pa) 75 db (1 khz, 1 Pa) Dynamic Range 121 db, 1 khz at Max SPL 127 db, 1 khz at Max SPL Noise 24 db SPL 19 db SPL Low Frequency Roll-Off 80 Hz, 12 db/octave 80 Hz, 12 db/octave Phantom Power Requirement 48V DC, 3.2 ma 48V DC, 3.2 ma Weight (less accessories) 120 g (4.20 oz) 120 g (4.20 oz) Dimensions mm (6.28 ) long; 21 mm (0.83 ) diameter 155 mm (6.10 ) long; 21 mm (0.83 ) diameter Output Connector Integral 3-pin XLRM type Integral 3-pin XLRM type Accessories Furnished Protective carrying case Protective carrying case AT8405a Snap-in clamp, foam windscreen AT8405a Snap-in clamp, foam windscreen 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

9 30 series studio s ( PC 343-MC 210 ) 7 The new AT3060 tube offers the convenience and easy setup of a standard studio condenser by operating exclusively on 48V phantom power no dedicated power supplies and special cables required. Add to that an all-new large-diaphragm cardioid capsule design and you get the warm sound of a vintage tube mic combined with the exceptional quality and consistency you count on from Audio-Technica. AT Phantom-powered tube, includes AT8458 shock mount Newest addition to the 30 Series is the first tube in the line, one of the most affordable high-quality tube mics on the market No dedicated power supply or special cable needed; operates exclusively on 48V DC phantom power All-new large-diaphragm cardioid condenser element provides high sensitivity and smooth sound reproduction with low noise levels Hand-selected tubes are individually tested and aged to maintain peak performance Shock-mounted tube assembly dampens mechanically-coupled vibrations Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity Large coupling transformer provides superior low-frequency linearity Includes AT8458 shock mount and protective pouch State-of-the-art design and manufacturing techniques ensure compliance with A-T s stringent consistency and reliability standards AT3060 AT8458 AT3060 Specifications Element Polar Pattern Frequency Response Open Circuit Sensitivity Impedance Maximum Input Sound Level Signal-to-Noise Ratio Dynamic Range Noise Phantom Power Requirement Weight (less accessories) Dimensions Output Connector Accessories Furnished AT3060 Fixed-charge back plate permanently polarized condenser Cardioid 50-16,000 Hz 32 db (25.1 mv) re 1V at 1 Pa 400 Ω 134 db SPL (1 khz, 1% T.H.D.) 77 db (1 khz, 1 Pa) 117 db, 1 khz at Max SPL 17 db SPL 48V DC, 3 ma 540 g (19.1 oz) mm (6.71 ) long; 52 mm (2.05 ) maximum body diameter Integral 3-pin XLRM type Soft protection pouch, AT8458 Shock mount 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 db SPL

10 8 30 series studio s ( PC 343-MC 210 ) Make it happen Bringing a new level of professional performance to home and project studios, the 30 Series offers all the advantages of high-quality studio s at an affordable price. Every aspect of these s has been tailored for a very smooth, natural sound while ensuring maximum accuracy, making them a perfect complement for today s digital recording equipment. In addition to their rugged construction and high performance specifications, the 30 Series features the legendary reliability of Audio-Technica s modern engineering and manufacturing technology. This provides an exceptional level of consistency from model to model, critical when any of these mics are purchased in pairs. AT3032 AT Large-diaphragm cardioid condenser, includes AT8458 shock mount AT Small diaphragm cardioid condenser AT Small diaphragm omnidirectional condenser AT3035 AT3031 AT8458 AT3032 AT3035 AT3031 Specifications AT3035 AT3031 AT3032 Element Fixed-charge back plate Fixed-charge back plate Fixed-charge back plate permanently polarized condenser permanently polarized condenser permanently polarized condenser Polar Pattern Cardioid Cardioid Omnidirectional Frequency Response 20-20,000 Hz 30-20,000 Hz 30-20,000 Hz Low Frequency Roll-Off 80 Hz, 12 db/octave 80 Hz, 12 db/octave 80 Hz, 12 db/octave Open Circuit Sensitivity 32 db (25.1 mv) re 1V at 1 Pa 34 db (19.9 mv) re 1V at 1 Pa 34 db (19.9 mv) re 1V at 1 Pa Impedance 250 Ω 250 Ω 250 Ω Maximum Input Sound Level 148 db SPL, 1 khz at 1% T.H.D. 148 db SPL, 1 khz at 1% T.H.D. 148 db SPL, 1 khz at 1% T.H.D. 158 db SPL, with 10 db pad 158 db SPL, with 10 db pad 158 db SPL, with 10 db pad Signal-to-Noise Ratio 82 db, 1 khz at 1 Pa 78 db, 1 khz at 1 Pa 78 db, 1 khz at 1 Pa Dynamic Range 136 db, 1 khz at Max SPL 132 db, 1 khz at Max SPL 132 db, 1 khz at Max SPL Noise 12 db SPL 16 db SPL 16 db SPL Phantom Power Requirement 11-52V DC, 3 ma 11-52V DC, 3 ma 11-52V DC, 3 ma Weight (less accessories) 390 g (13.8 oz) 112 g (4.0 oz) 116 g (4.10 oz) Dimensions 170 mm (6.69 ) long 144 mm (5.67 ) long 144 mm (5.67 ) long 52 mm (2.05 ) max diameter 21 mm (0.83 ) max diameter 21 mm (0.83 ) max diameter Output Connector Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Accessories Furnished AT8458 shock mount AT8405a snap-in clamp, AT8159 AT8405a snap-in clamp, AT8159 Soft protective pouch windscreen Soft protective pouch windscreen Soft protective pouch 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

11 artist series s ( PC 305-MC 220 ) 9 The first choice of many audio professionals is Audio-Technica s established line of Artist Series s. The broad range of ATM dynamic and condenser models is ideal for both studio and soundreinforcement applications. Unique, specialized designs solve the most difficult pickup problems with innovative engineering and ultra-precise manufacturing. ATM10a Omnidirectional condenser Ideal for vocal/instrument use when maximum ambient pickup is desired. Use it on hi-hat, strings, guitar, piano, and overheads. Operates on battery or phantom power. ATM10a ATM31a Cardioid condenser Designed for general studio/stage use with a wide frequency response. Excellent for closeup vocals, piano, reeds, and brass. Operates on battery or phantom power. ATM33a Cardioid condenser Designed for general studio/stage use with a wide frequency response. Excellent for closeup vocals, piano, reeds, and brass. Operates on battery or phantom power. ATM31a ATM89R Hypercardioid condenser, interchangeable elements Designed for general studio/stage use with a wide frequency response. Excellent for closeup vocals, piano, reeds, and brass. Operates on 48V DC phantom power. Additional patterns are available on request. See page 21 (AT853C- ELE, AT853H-ELE, AT853O-ELE). Hi-SPL BOUNDARY MICROPHONE FOR KICK-DRUM ATM87R Hi-SPL cardioid condenser boundary plate ATM87R Operates on 48V phantom power. Integral preamplifier with bass roll off switching facility. For placement inside a kick-drum. Frequency response: 30-20,000Hz Maximum input sound level: 151dB SPL Impedance: 100 ohms ATM33a ATM89R Specifications ATM10a ATM31a ATM33a ATM89R Element Condenser Condenser Condenser Condenser Polar Pattern Omnidirectional Cardioid Cardioid Hypercardioid Frequency Response 20-18,000 Hz 30-20,000 Hz 30-20,000 Hz 70-20,000 Hz Open Circuit Sensitivity 44 db (6.3 mv) 44 db (6.3 mv) 44 db (6.3 mv) 42 db (7.9 mv) Impedance 200 Ω 200 Ω 200 Ω 100 Ω Maximum Input Sound Level 137 db SPL 137 db SPL 137 db SPL 138 db SPL 1 khz at 1% T.H.D. Signal-to-Noise Ratio 70 db, 1 khz at 1 Pa 70 db, 1 khz at 1 Pa 70 db, 1 khz at 1 Pa 67 db, 1 khz at 1 Pa Dynamic Range 113dB(1 khz at Max SPL) 113 db (1 khz at Max SPL) 113 db (1 khz at Max SPL) 111 db (1 khz at Max SPL) Power Requirement Phantom 9-52V, 2 ma Phantom 9-52V, 2 ma Phantom 9-52V, 2 ma Phantom 48V, 3.2 ma or 1.5 V AA battery or 1.5 V AA battery or 1.5 V AA battery Weight (less accessories) 200 g (7.1 oz) 200 g (7.1 oz) 150 g (5.3 oz) 290 g (10.2 oz) Output Connector Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Accessories Furnished AT8405a stand clamp AT8405a stand clamp AT8405a stand clamp AT8406a stand clamp AT8136 windscreen AT8114 windscreen AT8136 windscreen Protective pouch 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 db SPL

12 10 artist series s ( PC 305-MC 220 ) ATM73a Professional miniature headworn cardioid condenser Offers side-of-mouth pickup. Ideal for drummers, keyboardists, and people who need to keep their hands free. Unobtrusive headband, flexible mic boom. Operates on battery or phantom power. ATM73ac Same as ATM73a but unterminated for wireless and special applications Includes AT8125 and AT8128 windscreens; no power module. ATM75 ATM Headworn cardioid condenser Offers front-of-mouth pickup. Pivot-mount mic boom descends from left or right side. Operates on battery or phantom power ATM75c Same as ATM75 but unterminated for wireless and special applications Includes AT8139L large windscreen and AT8439 cable clothing clip; no power module. ATM High-intensity clip-on cardioid condenser instrument Includes UniMount clip for direct attachment instruments. Crisp, clear, well-balanced response even at high SPLs. Included UniMount clips to brass, reeds, piano, string bass, toms, and snare. Operates on battery or phantom power. ATM73a ARTIST SERIES MICROPHONES FOR A-T UNIPAK WIRELESS SYSTEMS (PC 458-MC 140) (see wireless essentials, page 36) ATM73cW ATM73cW Professional miniature headworn cardioid condenser, terminated with HRS plug ATM75cW Headworn cardioid condenser, terminated with HRS plug ATM35cW High-intensity clip-on cardioid condenser instrument, terminated with HRS plug ATM35 Specifications ATM73a ATM75 ATM35 Element Condenser Condenser Condenser Polar Pattern Cardioid Cardioid Cardioid Frequency Response 60-15,000 Hz 60-15,000 Hz 30-20,000 Hz Open Circuit Sensitivity 55 db (1.5 mv) 51 db (2.8 mv) 45 db (5.6 mv) Impedance 200 Ω 200 Ω 200 Ω Maximum Input Sound Level 135 db SPL 132 db SPL 145 db SPL Signal-to-Noise Ratio (1 khz, 1 Pa) 60 db 58 db 67 db Dynamic Range (1 khz) 99 db 96 db 118 db Power Requirement Phantom 9-52V, 2 ma Phantom 9-52V, 2 ma Phantom 11-52V, 2 ma typical or 1.5 V AA battery or 1.5 V AA battery or 9 V battery Weight (less accessories) 31.2 g (1.1 oz) 60 g (2.1 oz) 8.5 g (0.3 oz) Output Connector XLRM-type on power module XLRM-type on power module XLRM-type on power module Accessories Furnished AT8530 power module (attached) AT8139L large windscreen AT8418 UniMount instrument mount Windscreen AT8530 power module (attached) AT8532 power module AT8139S small windscreen Protective pouch AT8439 clothing clip 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

13 11 INSTRUMENT MICROPHONES ATM23HE Hi-ENERGY neodymium dynamic hypercardioid Very rugged, designed specifically for use with snare drum. Also suitable for all high SPL environments such as kick drum, tom toms and guitar cabinets. ATM23HE ATM25 ATM Rugged dynamic hypercardioid Featuring tailored bass response ideal for miking kick drums and other high SPL applications. ATM29HE STAGE/STUDIO DYNAMIC MICROPHONES ATM27HE Hi-ENERGY handheld hypercardioid dynamic Professional designed for stage or recording vocal applications. ATM29HE Hi-ENERGY hypercardioid dynamic Features a Hi-ENERGY design for increased gain before feedback and superb handling noise for professional performance for vocal applications. ATM41HE Hi-ENERGY handheld hypercardioid dynamic Low handling noise and sonic qualities make this the choice of professional vocalists who require a dynamic for stage and recording applications. ATM61HE Hi-ENERGY hypercardioid dynamic vocal Similar in many ways to the ATM41HE. The ATM61HE features a slightly longer headbasket to suit vocalists who experience popping and sibilance. ATM27HE ATM61HE ATM63HE ATM41HE ATM61HE/S As ATM61HE with on/off switch ATM63HE Close-working Hi-ENERGY hypercardioid dynamic Ideal for applications as varied as guitar cabinets, vocals and a wide range of instrumentation. Specifications ATM23HE ATM25 ATM27HE ATM29HE Polar Pattern Hypercardioid Hypercardioid Hypercardioid Hypercardioid Frequency Response 70-16,000 Hz 30-15,000 Hz 60-15,000 Hz 70-16,000 Hz Open Circuit Sensitivity 53 db (2.2 mv) 54 db (1.9 mv) 56 db (1.5 mv) 56 db (1.5 mv) Impedance 600 Ω 600 Ω 200 Ω 200 Ω Output Connector XLRM-type XLRM-type XLRM-type XLRM-type Accessories Furnished Integral stand clamp Integral stand clamp AT8406a stand clamp AT8406a stand clamp Protective pouch Protective pouch Protective pouch Protective pouch Foam windscreen Specifications ATM41HE ATM61HE ATM63HE Polar Pattern Hypercardioid Hypercardioid Hypercardioid Frequency Response 50-17,000 Hz 50-18,000 Hz 50-18,000 Hz Open Circuit Sensitivity 51 db (2.8 mv) 51 db (2.8 mv) 52 db (2.5 mv) Impedance 600 Ω 600 Ω 600 Ω Output Connector XLRM-type XLRM-type XLRM-type Accessories Furnished AT8406a stand clamp AT8406a stand clamp AT8406a stand clamp Protective pouch Protective pouch Protective pouch, Foam windscreen 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 db SPL

14 12 midnight blues s ( PC 323-MC 220 ) The Midnight Blues all-metal construction says quality and its velvety finish gives a secure, comfortable grip. This ultra-soft-touch surface also minimizes mechanical noise and sealed magnetic reed switches on all dynamic models are contoured to fit the mic s sleek profile. High volumes come through without distortion, clarifying the intensity of vocals and instruments and even subtle nuances are clean and precise. This is truly high-output performance on a budget. MB1k Suitable for piano, percussion, guitar, string instruments Antishock resistant construction Antipop and wind protection head case and shield Cardioid polar pattern Anti-corrosion XLRM-type connectors DYNAMIC MICROPHONES MB1k Dynamic vocal with hi-output Hi-ENERGY dynamic neodymium element for improved output and transient response Silent on-off operation with the Magna-Lock switch design 600 ohms impedance allowing a longer cable Frequency response: 80-12,000 Hz MB1k/c MB1k with 4.50m XLR-XLR cable MB2k Dynamic instrument For amplified and acoustic instruments at an attractive price Tailored frequency response for optimal instrument reproduction Hi-ENERGY dynamic neodymium element for improved output and transient response Silent on-off operation with the Magna-Lock switch design 600 ohms impedance allowing a longer cable Frequency response: 60-14,000 Hz MB2k MB3k MB2k/c MB2k with 4.50m XLR-XLR cable MB3k Dynamic vocal with extended response Extended frequency response for optimal vocal reproduction Hi-ENERGY dynamic neodymium element for improved output and transient response Silent on-off operation with the Magna-Lock switch design Antishock suspension reducing handling noise 600 ohms impedance allowing a longer cable Frequency response: 60-14,000 Hz MB3k/c MB3k with 4.50 m XLR-XLR cable MB4k CARDIOID CONDENSER MICROPHONE MB4k Cardioid condenser A quality studio at a quality price Electret technology for vocal and instrument studio applications Extended frequency response Antishock suspension reducing handling noise Phantom power 11-52V DC 2 ma typical or 1.5 V AA Includes AT8405a stand clamp, windscreen Frequency response: 80-20,000 Hz Impedance : 200 ohms MB4k/c MB4k with 4.50 m XLR-XLR cable European professional price guide 2004, prices in Euro EX-VAT 1

15 KitPak kits ( PC 324-MC 220 ) 13 KP-VOCALS KP-VOCALS vocal kit The KP-VOCALS KitPak handles any band s front-line vocal miking needs with ease. An incredible value in a convenient, portable package, the KP-VOCALS includes three VOCAL mics and three bonus cable ties in a durable carrying case. Three custom-engineered cardioid dynamic vocal mics with stand clamps Road-ready metal construction Superior internal shock mounting Multistage windscreen and on/off switch Element: Dynamic Polar Pattern: Cardioid Frequency Response: ,000 Hz Open Circuit Sensitivity: 54 db (1.9 mv) re 1V at 1 Pa Impedance: 500 ohms KP-VOCALS KP-DRUMS KP-DRUMS drum kit The KP-DRUMS KitPak offers exceptional performance and outstanding value in a convenient, portable package. Each KP-DRUMS includes two Snare/Tom mics and two Kick/Tom mics in a durable carrying case. Bonus drum key is also included. Four custom-engineered cardioid dynamic drum mics Road-ready all-metal construction Low-profile percussion-style design with built-in adjustable stand mount Kick/Tom and Snare/Tom mics available separately KP-DRUMS KICK/ TOM Kick/Tom dynamic The Kick/Tom cardioid dynamic combines big, warm low-frequency response with excellent presence and is ideal for kick and floor toms. Element: Dynamic Polar Pattern: Cardioid Frequency Response: 60-12,000 Hz Open Circuit Sensitivity: 59 db (1.1 mv) re 1V at 1 Pa Impedance: 500 ohms Weight: 317 grams Dimensions: mm long x Ø 53.5 mm Output Connector: Integral 3-pin XLRM type KICK/TOM SNARE/ TOM Snare/Tom dynamic The Snare/Tom cardioid dynamic provides high performance and rugged dependability for miking snare, floor and rack toms. Element: Dynamic Polar Pattern: Cardioid Frequency Response: 60-12,000 Hz Open Circuit Sensitivity: 58 db (1.2 mv) 1V at 1 Pa Impedance: 500 ohms Weight: 324 grams Dimensions: mm long x Ø 41.5 mm Output Connector: Integral 3-pin XLRM type SNARE/TOM

16 14 pro series s ( PC 320-MC 240 ) PRO4L Cardioid moving coil dynamic Hugely popular low impedance handheld dynamic vocal. Suitable for live work due to its excellent resistance to handling noise. On/off switch. Includes 5 m cable (XLRF-XLRM), stand clamp and soft protective pouch. PRO4L PRO8HEx Hi-ENERGY headworn hypercardioid dynamic With a 1.8 m long cable terminated with XLRM. Front of mouth pick-up, ideal solution for hands free speech applications and hard wearing activities such as aerobics. includes AT8139L large windscreen, AT8139S small windscreen, AT8439 clothing clip. PRO25 PRO8HE/S Headworn as PRO8HEx product but with unterminated cable PRO High-SPL hypercardioid dynamic instrument High intensity, dynamic. Designed for problem free use in extremely high SPL situations such as kick drum and bass guitar cabinets. Output on integral 3-pin XLRM-type connector, includes integral stand clamp and soft protective pouch. PRO7a Cardioid condenser lavalier for vocal and acoustic guitar applications Crisp, full voice and instrument pickup, lowfrequency roll-off switch, integral 1.8 m long permanently attached cable between and power module. Supplied with AT8411 clothing clip, AT8444 instrument adaptor, AT8116 windscreen, power module, battery. PRO35x High-intensity miniature remote-powered condenser with cardioid polar pattern Instrument. Unique foam padded bulldog clip enables the PRO35x to be mounted onto a variety of musical instruments, and flexible gooseneck ensures accurate positioning. Supplied with AT8418 UniMount instrument mount, AT8533x power module. PRO Acoustic instrument condenser Battery powered (LR V) clip on condenser instrument specially designed for acoustic guitar performance and recording applications. Flexible gooseneck ensures accurate positioning of capsule in relation to the sound hole. Supplied with windscreen, power module clip, end-pin-jack and 1/4" phone plug. PRO37R Small-diaphragm cardioid condenser End fire for professional sounding results on a wide variety of instrument applications. Especially suitable for the pick up of drums, piano and brass. Operates on 9-52 V phantom power.supplied with AT8405a snap-in clamp, foam windscreen. PRO8HEx PRO35x PRO37R PRO7a PRO95 European professional price guide 2004, prices in Euro EX-VAT 1

17 adaptive-array ( PC 307-MC 210 ) 15 ADAPTIVE-ARRAY MICROPHONE SYSTEM The AT895 System incorporates a revolutionary DSPcontrolled five-element array that provides adaptive directional audio acquisition. The output of the array is manipulated and filtered by acoustical, analogue and digital means to enhance the pick up of a sound source from a desired direction relative to unwanted background noise or interference, providing cancellation of up to 80 db. The AT895 is available as the AT895RK Remote kit for field use. AT895/RK AT895/RK AT895/RK Remote kit for field use The system configuration includes AT895MIC Adaptive-array Microphone AT895CP Control Pack with attached belt clip AT895BH Click-on Battery Housing AT895PG Pistol-grip shock mount AT895Z Zeppelin-type windscreen AT895C-10 Special 6-conductor shielded Cable, 10 long AT895CC Carrying Case AT895CP AT895MIC Specifications AT895 Element Condenser Frequency Response 60-12,000 Hz Open Circuit Sensitivity -23 db (70 mv) Impedance 450 Ω Maximum Input Sound Level 117 db (1 khz at 1% T.H.D) Signal-to-Noise Ratio 70 db, 1 khz at 1 Pa Dynamic Range 93 db (1 khz at Max. SPL) Monitor Headphone Output 120 mw max. into 20 ohms each channel External Power Requirement 9-15V DC, 250 ma Battery Requirement (AT895BH) Three 9V type Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL AT895 vs.typical Shotgun Performance Compare acceptance angles (at 3 db down): Microphone 200 Hz 400 Hz 1 khz 2 khz 4 khz 8 khz Shotgun AT Compare Polar Patterns at 200 Hz: Microphone Rejection 200 Hz at 90 /270 Shotgun 15 db AT db Compare maximum off-axis rejection: Microphone Maximum Off-axis Rejection Shotgun 30 db AT db

18 16 broadcast & production s ( PC 306-MC 210) LINE + GRADIENT CAPACITOR MICROPHONES Audio-Technica AT4071a and AT4073a condenser shotguns have been specially created to meet the highest demands of broadcasting, film/video recording and theater sound reinforcement at only half the size of the traditional shot gun s. They have a switch-selectable hipass filter. The casing is made of almuminium making it robust yet lightweight. They feature a broad-band, linear on-axis frequency response, with maximum rejection of sounds from both the sides and the rear of the. Rear polar lobing, common in shotgun s, has been greatly reduced and the off-axis response remains highly uniform. The resultant lack of sound coloration on- and off-axis makes those s particularly useful for miking dynamic action in film/tv audio as well as in spot miking techniques in the music studio or theatre. The effective working distance of a directional is determined in great part by its polar pattern and the uniformity of its off-axis response. These factors help determine the signal-to ambient-noise ratio. Of course, the electronic signal-to-noise ratio also affects the usable miking distance. The AT4071a and the AT4073a provide extremely high output and a noise floor that is hardly measurable, much less audible. It may be used with confidence in distant miking applications and even under the stringent demands of modern digital recording systems. AT4071a AT4071a Line + gradient capacitor, 395 mm long AT4073a Line + gradient capacitor, 232 mm long AT4073a Specifications AT4071a AT4073a Frequency Response 30-20,000 Hz 30-20,000 Hz Open Circuit Sensitivity 21 db (89.1 mv) 23 db (70.8 mv) Impedance 100 Ω 100 Ω Maximum Input Sound Level 124 db SPL, 1 khz at 1% T.H.D. 126 db SPL, 1 khz at 1% T.H.D. Noise, typical (A-weighted) 12 db SPL 14 db SPL Dynamic Range, typical 112 db, 1 khz at Max. SPL 112 db, 1 khz at Max. SPL Signal-to-Noise Ratio, typical 82 db, 1 khz at 1 Pa 80 db, 1 khz at 1 Pa Power Requirement 11-52V DC 11-52V DC Weight 155 g (5.5 oz) 114 g (4.0 oz) Dimensions L 395 mm; Ø 21 mm L 232 mm; Ø 21 mm Accessories Furnished: AT8405a snap-in clamp; protective carrying case; AT8135 reticulated, open-cell foam windscreen 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

19 17 STEREO SHOTGUN MICROPHONES Switch selectable non-matrixed M-S mode and two internallymatrixed left/right stereo modes provide versatile professional performance. In M-S mode, each provides independent mid and side signals. This allows the desired stereo image to be created at the recording desk or mixing electronics. The two internally-matrixed modes provide traditional left-right stereo to accomodate varying acoustic environments, the user may select between a wide pattern (LR-W) with increased ambient pickup, and narrow pattern (LR-N) which offers more rejection and less ambience. AT815ST mm stereo shotgun s AT835ST mm stereo shotgun s AT815ST AT835ST Specifications AT815ST AT835ST Frequency Response 30-20,000 Hz 40-20,000 Hz Polar Pattern Line Cardioid and figure-of-eight Low-Frequency Roll-Off 80 Hz, 12 db/octave Open Circuit Sensitivity Mid: 30 db (31.6 mv) re 1 V at 1 Pa Side: 34 db (19.9 mv) LR Stereo: 36 db (15.8 mv) Impedance 200 Ω Maximum Input Sound Level Mid Side LR Stereo 123 db 127 db 126 db SPL Dynamic Range Mid Side LR Stereo 1 khz at Max SPL 101 db 101 db 102 db Signal-to-Noise Ratio 72 db Phantom Power DC, 4 ma typical at 48V Requirements each channel Weight 142 g (5.0 oz) 103 g (3.6 oz) Dimensions 380 mm long 236 mm long Ø 21 mm Ø 21 mm 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL LINE + GRADIENT CONDENSER MICROPHONES. The AT815b and the AT835b are wide-range condenser s with a line + gradient polar pattern specifically designed to provide the narrow acceptance angle desirable for long distance sound pickup. AT815b mm line + gradient condenser AT835b mm line + gradient condenser SHORT SHOTGUN MICROPHONE AT mm long. Short shotgun The AT897 mounts conveniently on a DV camcorder without adding noticeably to the weight, and delivers smooth natural-sounding audio quality with the versatility of battery/phantom power. AT8315b AT835b AT897 Specifications AT815b AT835b AT897 Frequency Response 30-20,000 Hz 40-20,000 Hz 20-20,000 Hz Polar Pattern Line + gradient Line + gradient Line + gradient Low-Frequency Roll-Off 180 Hz 12 db/octave 180 Hz 12 db/octave 80 Hz 12 db/octave Open Circuit Sensitivity 38 db (12.5 mv) 38 db (12.5 mv) 40 db (10 mv) Impedance 500 Ω 500 Ω 200 Ω Maximum Input Sound 130 db SPL (phantom) 130 db SPL ( phantom) 129 db SPL ( phantom) Level 115 db SPL (battery) 115 db SPL (battery) 115 db SPL (battery) Dynamic Range 106 db (phantom) 106 db ( phantom) 112 db ( phantom) 91 db (battery) 91 db (battery) 98 db (battery) Signal-to-Noise Ratio 70 db 1 khz at 1 Pa 70 db 1 khz at 1 Pa 77 db 1 khz at 1 Pa Power Requirement 9-52V DC or 9-52V DC or 11-52V DC or 1.5 V AA 1.5 V AA 1.5 V AA Weight 200 g (7.1 oz) 150 g (5.3 oz) 145 g (5.1 oz) Dimensions L 460 mm (18.11 ) L 369 mm (14.53 ) L 279 mm (10.98 ) Ø 21 mm Ø 21 mm Ø 21 mm Accessories AT8405a Snap-in clamp AT8405a Snap-in clamp AT8405a Stand clamp Furnished Windscreen AT8132 Windscreen AT8134 Windscreen Protection carrying case Protection carrying case Protection carrying case AT897 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL

20 18 broadcast & production s ( PC 306-MC 210 ) STEREO MICROPHONES AT OnePoint X/Y stereo field recording 5-pin XLRM type output cable with two 3-pin balanced XLRM-type connectors at equipment end. Roll-off switch. 5-52V phantom power or 1.5V AA battery. Includes AT8405a stand clamp, AT8120 windscreen, battery and protective pouch AT OnePoint X/Y stereo DAT XLRM-type output. Cables: 1.7 with stereo 3.5 mm mini-plug output for DAT and camcorders; 10 with two mono 3.5 mm mini-plug outputs and 1/4 adaptors. 1.5VAA battery only. AT Stereo condenser boundary Full mono compatibility. Intended primarily for surface mount applications in broadcast, professional recording and sound reinforcement. AT822 AT804 AT825 OMNIDIRECTIONAL MICROPHONES AT Omnidirectional The ideal for ENG reporting applications due to its ultra rugged dynamic design and very simple operation. AT804L Omnidirectional for reporting Moving coil dynamic. Designed for interviews, & sports casting. Used as mono in conjunction with a stereo. AT808G AT849 MULTI-CHANNEL BOUNDARY MICROPHONE AT854R Multi-channel condenser boundary Quad mic. Four independent UniPoint cardioid capsules mounted in a single die cast metal housing. Ideal for conference applications, especially when used in conjunction with A-T Smartmixer products V phantom power only. XLR GOOSENECK MICROPHONE AT808G Subcardioid moving coil dynamic console mm long. XLRM-type output plugs directly into XLRF-type panel mount or console connector. AT854R European professional price guide 2004, prices in Euro EX-VAT 1

21 19 AT899 AND AT898 SYSTEMS AT Subminiature omnidirectional condenser For interviews, documentary, film and theatre applications. With AT8537 power module and AT899AK accessory kit. AT899c Unterminated version of AT899, 1.40 m cable AT899c-TH Unterminated version of AT899 in beige AT899AK AT899 accessories pack AT899AK-TH AT899 accessories pack in beige AT Subminiature cardioid condenser With AT8537 power module, AT898 Acc Set, and AT8463 neck wire. AT898c Unterminated version of AT898 AT898AK AT898 accessories pack ELECTRET LAVALIER MICROPHONES AT803b Miniature omnidirectional condenser. For lavalier and musical instrument use m cable AT803cb Unterminated version of AT803b (less power module and unterminated) AT831R Miniature unidirectional condenser Suitable for musical instruments and lavalier use where feedback or room noise is a problem. AT831b Miniature cardioid condenser Same as AT831R but operates on a single 1.5V AA battery or phantom power if available. AT831c Unterminated version of AT831R and b MT830R Miniature omnidirectional condenser For use as lavalier, or may be worn in clothing or hair. MT830c Unterminated version of MT830R MT350b Ultra miniature cosmetic stage/ theatre With free ended cable for use in wireless applications, comes with AT8435 clothing clip windscreen. MT838b Miniature omnidirectional condenser lavalier With free ended cable for use in wireless applications, comes with clip, windscreen. AT899 AT803b AT831b MT830R MT838b MT350b AT898 Specifications AT803b AT831R AT831b MT830R Element Condenser Condenser Condenser Condenser Polar Pattern Omnidirectional Cardioid Cardioid Omnidirectional Frequency Response 30-20,000 Hz 40-20,000 Hz 40-20,000 Hz 30-20,000 Hz Open Circuit Sensitivity 45 db (5.6 mv) 42 db (7.9 mv) 44 db (6.3 mv) 34 db (19.9 mv) Impedance 200 Ω 200 Ω 200 Ω 200 Ω Maximum Input Sound 135 db SPL 141 db SPL 135 db SPL 131 db SPL Level 1 khz,t.h.d. 1% Signal-to-Noise Ratio 65 db 65 db 65 db 70 db 1 khz at 1 Pa Low Frequency Roll-Off 80 Hz, 18 db/octave N.A. 80 Hz, 18 db/octave N.A. Power Requirement 9-52V DC 9-52V DC 9-52V DC 9-52V DC or 1.5 V AA battery phantom only or 1.5 V AA battery phantom only Output Connector XLRM (power module) XLRM (power module) XLRM (power module) XLRM on cable Accessories Furnished AT8530 Power module AT8533 Power module AT8530 Power module AT8533 Power module (for AT803b), AT8444 Instrument adaptor AT8116 Windscreen AT8130 Windscreen AT8116 Windscreen AT8417 Clothing clip AT8444 Instrument adaptor AT8420 Clothing clip AT8417 Clothing clip AT8418 UniMount Mount AT8417 Clothing clip 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL 1 Pa

22 20 propoint s ( PC 311-MC 230 ) BOUNDARY MICROPHONES PRO Miniature unidirectional condenser boundary 7.6 m cable with XLRM-type output connector. PRO Unidirectional condenser boundary Includes 7.6 m cable with TA3F connector; XLRM-type connector at equipment end. PRO49QL PRO47TL HANGING MICROPHONES PRO Cardioid condenser hanging 7.6 m cable with XLRM-type output connector. Includes AT8146 windscreen and AT8451 steel hanger. PRO45W White finished version of PRO45 White cable with XLRM-type output connector. Includes AT8146(WH) windscreen and AT8451(WH) steel hanger. PRO49Q PRO45 PRO47T GOOSENECK MICROPHONES PRO47T Cardioid condenser thread-mount gooseneck attaches to 5/8"-27 thread 3m cable with XLRM-type output connector. 315 mm long. Includes AT8146 windscreen and AT8425 threaded mounting stud PRO47TL Cardioid condenser thread-mount gooseneck attaches to 5/8"-27 thread 3m cable with XLRM-type output connector. 401 mm long. Includes AT8146 windscreen and AT8425 threaded mounting stud PRO49Q Cardioid condenser quick-mount gooseneck Plugs directly into a panel- or desk-mounted XLRF-type connector,or to a standard XLRFtype cable 332 mm long. Includes AT8146 windscreen. PRO42 PRO44 PRO49QL Cardioid condenser quick-mount gooseneck Plugs directly into a panel- or desk-mounted XLRF-type connector,or to a standard XLRFtype cable 418 mm long. Includes AT8146 windscreen. Specifications PRO 42 PRO 44 PRO 45 PRO 47T PRO 49Q PRO 47TL PRO 49QL Application Boundary Boundary Hanging Gooseneck Gooseneck Element Condenser Condenser Condenser Condenser Condenser Polar Pattern Unidirectional Unidirectional Cardioid Cardioid Cardioid Frequency Response 70-14,000 Hz 70-16,000 Hz 70-16,000 Hz 70-16,000 Hz 70-16,000 Hz Open Circuit Sensitivity 38 db (12.5 mv) 25 db (56.2 mv) 37 db (14.1 mv) 37 db (14.1 mv) 37 db (14.1 mv) Impedance 100 Ω 100 Ω 100 Ω 100 Ω 100 Ω Maximum Input Sound 134 db 114 db 134 db 134 db 134 db Level 1 khz at 1% T.H.D. 1 khz at 1% T.H.D. 1 khz at 1% T.H.D. 1 khz at 1% T.H.D. 1 khz at 1% T.H.D. Signal-to-Noise Ratio 65 db 1 khz at 1 Pa 66 db 1 khz at 1 Pa 66 db 1 khz at 1 Pa 66 db 1 khz at 1 Pa 66 db 1 khz at 1 Pa Dynamic Range 105 db 86 db 106 db 106 db 106 db 1 khz at Max. SPL 1 khz at Max. SPL 1 khz at Max. SPL 1 khz at Max. SPL 1 khz at Max. SPL 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

23 unipoint s ( PC 310-MC 230 ) 21 MINIATURE HANGING MICROPHONES Versatile ultraminiature designed for high-quality recording, broadcast,and sound reinforcement applications. Perfect for suspension over a choir, orchestra, stage, etc. Available interchangeable elements provide a variety of pickup patterns. AT853a Miniature cardioid condenser AT8451 AT853Wa White version of AT853a AT853Rx Miniature cardioid condenser same as AT853a with phantom only power module AT853RWx White version of AT853Rx REPLACEMENT ELEMENTS These capsules are compatible with the s AT851, AT853, AT857, AT871, AT873R, ATM89R and ES973 AT853C-ELE Cardioid capsule, black version 120 frontal pickup pattern AT853H-ELE Hypercardioid capsule, black version Increases directionality to provide better gainbefore-feedback or reduction of background noise over the other patterns. 100 pickup pattern. AT853a/AT853Rx AT853O-ELE Omnidirectional capsule, black version Allows operation in all directions with a 360 pickup pattern. AT8531 AT853Wa AT8451WH AT8438WH AT853C-ELE Specifications AT853a (AT853Wa) AT853Rx (AT853RWx) Element Condenser Condenser Polar Pattern Cardioid (interchangeable elements available) Cardioid (interchangeable elements available) Frequency Response 30-20,000 Hz 30-20,000 Hz Open Circuit Sensitivity 44 db (6.3 mv) 43 db (7.0 mv) Impedance 200 Ω 200 Ω Maximum Input Sound Level (Phantom) 135 db 1 khz at 1% T.H.D. 138 db 1 khz at 1% T.H.D. Signal-to-Noise Ratio 67 db 1 khz at 1 Pa 67 db 1 khz at 1 Pa Low Frequency Roll-Off 80 Hz, 18 db/octave 150 Hz, 6 db/octave Power Requirement 9-52V DC or battery 1.5V AA 9-52V DC phantom power only Weight (less accessories) 10 grams (0.4 oz) 10 grams (0.4 oz) Dimensions 35.2 mm long ; Ø 12 mm 35.2 mm long ; Ø 12 mm Output Connector Integral 3-pin XLRM-type Integral 3-pin XLRM-type Accessories Furnished AT8102 Windscreen (AT8102 WH) AT8102 Windscreen (AT8102 WH) AT8451 Steel hanger (AT8451 WH) AT8451 Steel hanger (AT8451 WH) AT8531 Power module AT8533x Power module 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL

24 22 unipoint s ( PC 310-MC 230 ) GOOSENECK MICROPHONES Double gooseneck s designed for high-quality sound reinforcement, professional recording and broadcasting. Direct mounts to any 5/8"-27 desk or floor stand, or to threaded mounting stud included. Available interchangeable elements provide a variety of pickup patterns (see AT853 Series interchangeable elements, page 21) AT857AMa Miniature cardioid condenser adaptor-mount 310 mm long gooseneck AT857AMLa mm-long version of AT857AMa AT857AMx Phantom power only version of AT857AMa AT857AMLx mm-long version of AT857AMx AT857QMa Cardioid condenser quick-mount gooseneck Similar to the AT857AMx in a quick-mount version which allows instant installation and removal. Plugs into any standard XLRF-type surface or cable connector. 370 mm long. Available interchangeable elements provide a variety of pickup patterns. Integral power module requires phantom power. AT857QMLa mm-long version of AT857QMa AT857AMa AT857AMLa MINIATURE GOOSENECK MICROPHONE (Not using AT853 series interchangeable elements) AT859QMLx Miniature cardioid condenser gooseneck Plugs directly to XLRF-type panel-mount or cable connector. 9-52V phantom power only. Roll-off switch. 470 mm long. AT859QMLx AT873R HANDHELD CONDENSER MICROPHONE AT873R Handheld remote-powered hypercardioid condenser (now replaced by the ES973) (see page 29) AT8615RS AT859QMLx Specifications AT857AMa and AMLa AT857AMx and AMLx AT857QMa and QMLa AT859QMLx Element Condenser Condenser Condenser Condenser Polar Pattern Cardioid Cardioid Cardioid Cardioid Frequency Response 30-20,000 Hz 30-20,000 Hz 30-20,000 Hz 50-18,000 Hz Open Circuit Sensitivity 44 db (6.3 mv) 43 db (7.0 mv) 43 db (7.0 mv) 46 db (5.0 mv) Impedance 200 Ω 200 Ω 200 Ω 200 Ω Maximum Input Sound Level 135 db SPL 138 db SPL 139 db SPL 140 db SPL 1 khz at 1% T.H.D. Signal-to-Noise Ratio 67 db (1 khz at 1 Pa) 67 db (1 khz at 1 Pa) 67 db (1 khz at 1 Pa) 65 db (1 khz at 1 Pa) Low Frequency Roll-off 80 Hz, 18 db/octave 150 Hz, 6 db/octave 150 Hz, 6 db/octave 150 Hz, 6 db/octave Phantom Power Requirement 9-52V DC or battery 1.5V AA 9-52V DC 9-52V DC 9-52V DC phantom power only phantom power only phantom power only Output Connectors Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type on the power module on the power module on gooseneck on gooseneck Accessories Furnished AT 8102 windscreen, AT 8102 windscreen, Windscreen AT8102 Windscreen AT8102 AT8425 mounting stud, AT8425 mounting stud, AT8531 power module, AT8533x power module, 3 m cable (AT3F connector) 3 m cable (AT3F connector) permanently attached to mic permanently attached to mic 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

25 23 OMNIDIRECTIONAL BOUNDARY MICROPHONES AT841a OmniPlate condenser plate Operates on 1.5V AA battery or 9-52V phantom power. In-line pre-amplifier includes off/on/ roll-off switch. 8 m cable. Circular with 65 mm diameter. AT841Rx OmniPlate condenser plate with its own preamp AT8533x Phantom power only. CARDIOID BOUNDARY MICROPHONES AT851a UniPlate unidirectional condenser plate Operates either from 1.5V AA battery or 9-52V phantom power. In-line pre-amplifier includes off/on/roll-off switch. 8 m cable. AT851Wa White version AT851a AT851Rx Phantom power only version of AT851a Operates on 9-52V DC. Integral roll-off switch in pre amplifier module. AT851RWx White version AT851Rx AT871R UniPlate unidirectional condenser plate Pre amplifier module is built-in, plugs directly into XLRF-type input with 9-52V phantom power. 8 m cable with XLRM-type plug at equipment end. AT871RW White version AT871R AT891R UniPlate unidirectional condenser plate with sensitive switch With a press to touch sensitive switch featuring three position switching; on/off, push to talk and push to mute settings. Operates on 9-52 V phantom power. AT891R/C UniPlate unidirectional condenser plate with sensitive switch without connector Special version of AT891R with permanently attached cable AT851Wa AT841a AT851a AT871R AT891R Specifications AT841a AT841Rx AT851a and Wa AT851Rx AT871R AT891R Element Condenser Condenser Condenser Condenser Condenser Condenser Polar Pattern Omnidirectional Omnidirectional Unidirectional Unidirectional Unidirectional Unidirectional Frequency Response 30-20,000 Hz 30-20,000 Hz 30-20,000 Hz 30-20,000 Hz 30-20,000 Hz 30-10,000 Hz Open Circuit Sensitivity 42 db (7.9 mv) 42 db (7.9 mv) 44 db (6.3 mv) 43 db (7.0 mv) 33 db (22.4 mv) 33 db (22.4 mv) Impedance 200 Ω 200 Ω 200 Ω 200 Ω 200 Ω 200 Ω Maximum Input Sound 133 db SPL 133 db SPL 135 db SPL 138 db SPL 130 db SPL 123 db SPL Level 1 khz at 1% T.H.D. Signal-to-Noise Ratio 65 db 65 db 67 db 67 db 67 db 64 db 1 khz at 1 Pascal Low Frequency Roll-Off 80 Hz, 18 db/octave 150 Hz, 18 db/octave 80 Hz, 18 db/octave 150 Hz, 6 db/octave NA 80 Hz, 18 db/octave Power Requirement 9-52V DC 9-52V DC 9-52V DC 9-52V DC 9-52 V DC 12-52V DC or 1.5V AA battery phantom only or 1.5V AA battery phantom only phantom only phantom only Output Connector XLRM (power module) XLRM (power module) XLRM (power module) XLRM (power module) XLRM on cable XLRM on cable Accessories Furnished AT8531 Power module AT8533x Power module AT8531 Power module AT8533x Power module TA3F XLRM cable TA3F XLRM cable Protective pouch Protective pouch Protective pouch Protective pouch Protective pouch Protective pouch 1 Pascal = 94 db SPL

26 24 engineered sound s ( PC 309-MC 230 ) ES915 DOUBLE GOOSENECK MICROPHONES Condenser gooseneck with interchangeable capsules. Adjustable length 355 mm-425 mm except ML version 474 mm-544 mm. It features an XLRM-type connector insert at its base with recessed flat response/low-roll-off switch. ES915/C Miniature condenser cardioid gooseneck ES915/H Miniature condenser hypercardioid gooseneck ES915/ML Miniature condenser MicroLine gooseneck ES915/O Miniature condenser omnidirectional gooseneck ES917S GOOSENECK MICROPHONES WITH MUTE SWITCH AND LED Condenser gooseneck with interchangeable capsules. Fixed length 443 mm except ML version 562 mm. XLR mount with recessed flat response/low-roll-off switch and mute/on switch with status LED. ES917S/C Miniature condenser cardioid gooseneck with mute switch/led ES917S/H Miniature condenser hypercardioid gooseneck with mute switch/led ES917S/ML Miniature condenser MicroLine gooseneck with mute switch/led ES917S/O Miniature condenser omnidirectional gooseneck with mute switch/led ES915/C /H /O / ML ES917S/C /H /O / ML Specifications ES915 ES917S ES935 ES935S Element Condenser Condenser Condenser Condenser Polar Pattern O : Omnidirectional O : Omnidirectional O : Omnidirectional O : Omnidirectional C : Cardioid C : Cardioid C : Cardioid C : Cardioid H : Hypercardioid H : Hypercardioid H : Hypercardioid H : Hypercardioid ML : MicroLine ML : MicroLine ML : MicroLine ML : MicroLine Frequency Response C : 30-20,000 Hz C : 30-20,000 Hz C : 30-20,000 Hz C : 30-20,000 Hz H : 80-20,000 Hz H : 80-20,000 Hz H : 80-20,000 Hz H : 80-20,000 Hz ML : 30-20,000 Hz ML : 30-20,000 Hz ML : 30-20,000 Hz ML : 30-20,000 Hz Open Circuit Sensitivity C : 40 db (10.0 mv) C : 40 db (10.0 mv) C : 40 db (10.0 mv) C : 40 db (10.0 mv) re 1 V at 1 Pa H : 40 db (10.0 mv) H : 40 db (10.0 mv) H : 40 db (10.0 mv) H : 40 db (10.0 mv) ML : 35 db (17.7 mv) ML : 35 db (17.7 mv) ML : 35 db (17.7 mv) ML : 35 db (17.7 mv) Impedance 250 Ω 250 Ω 250 Ω 250 Ω Maximum Input Sound Level C : 138 db SPL C : 138 db SPL C : 138 db SPL C : 138 db SPL 1 khz at 1% T.H.D. H : 138 db SPL H : 138 db SPL H : 138 db SPL H : 138 db SPL ML : 133 db SPL ML : 133 db SPL ML : 133 db SPL ML : 133 db SPL Signal-to-Noise Ratio C : 65 db C : 65 db C : 65 db C : 65 db 1 khz at 1 Pa H : 65 db H : 65 db H : 65 db H : 65 db ML : 68 db ML : 68 db ML : 68 db ML : 68 db Low Frequency Roll-off 80 Hz, 12 db/octave 80 Hz, 12 db/octave 80 Hz, 12 db/octave 80 Hz, 12 db/octave Phantom Power Requirement 11-52V DC 11-52V DC 11-52V DC 11-52V DC Output Connector Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Length mm 443 mm 191 mm 191 mm ML : mm ML : 562 mm ML : 310 mm ML : 310 mm Accessories Furnished AT8109 (AT8138) Windscreen AT8109 (AT8138) Windscreen AT8109 (AT8138) Windscreen AT8109 (AT8138) Windscreen AT8651Thread-mount adaptor AT8651 Thread-mount adaptor AT8651 Thread-mount adaptor AT8651 Thread-mount adaptor AT8658 Shock mount AT8658 Shock mount AT8658 Shock mount AT8658 Shock mount 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

27 25 ES935 SINGLE-GOOSENECK MICROPHONES Condenser gooseneck with interchangeable capsules. Fixed length 191 mm except ML version 310 mm. XLR mount with recessed flat response/low-roll-off switch. ES935/C Miniature condenser cardioid gooseneck ES935/H Miniature condenser hypercardioid gooseneck ES935/ML Miniature condenser MicroLine gooseneck ES935/O Miniature condenser omnidirectional gooseneck ES935S SINGLE-GOOSENECK MICROPHONES WITH MUTE SWITCH AND LED Condenser gooseneck with interchangeable capsules. Fixed length 191 mm except ML version 310 mm. XLR mount with recessed flat response/low-roll-off switch and mute/on switch with status LED. Includes AT8109 (C/H/O) snap-on foam windscreen or AT8138 (ML) and AT8651 thread-mount adaptor; AT8658 shock mount. ES935/C /H /O / ML ES935S/C /H /O / ML ES935S/C Miniature condenser cardioid gooseneck with mute switch/led ES935S/H Miniature condenser hypercardioid gooseneck with mute switch/led ES935S/ML Miniature condenser MicroLine gooseneck with mute switch/led ES935S/O Miniature condenser omnidirectional gooseneck with mute switch/led 330 ESE-C 0 30 ESE-H INTERCHANGEABLE ELEMENTS FOR ENGINEERED SOUND MICROPHONES ES905, ES915, ES917, ES933, ES935, ES991, ES993, ES995, ES ESE-C Cardioid element for Engineered Sound s, 120 pickup pattern ESE-H Hypercardioid element for Engineered Sound s, 100 pickup pattern ESE-O Omnidirectional element for Engineered Sound s, 360 pickup pattern LEGEND 200 Hz 1 khz 5 khz 8 khz 180 SCALE IS 5 DECIBELS PER DIVISION ESE-ML LEGEND 200 Hz 1 khz 5 khz 8 khz SCALE IS 5 DECIBELS PER DIVISION ESE-O 0 30 ESE-ML MicroLine element for Engineered Sound s, 90 pickup pattern NB : This capsule is not suitable for s ES943 (tie clip), ES991, ES993 and ES995 (dual element s), due to its length SCALE IS 5 DECIBELS PER DIVISION 180 LEGEND SCALE IS 5 DECIBELS PER DIVISION 200 Hz 1 khz 5 khz 8 khz LEGEND 200 Hz 1 khz 5 khz 8 khz

28 26 engineered sound s ( PC 309-MC 230 ) ES905 RIGID-PIPE MICROPHONES Condenser rigid-pipe with interchangeable capsules. Fixed length mm except ML version mm. Rigid-pipe design with ball-and-socket base for permanent mounting to flat surface. Phantom power only, 11-52V. 3 m cable permanently attached to mic, free end attached to screw terminals in power module. XLRM-type output connector on power module. Includes: foam windscreen; AT8536 in-line power module with roll-off switch. ES905/C Rigid-pipe condenser, cardioid polar pattern ES905/H Rigid-pipe condenser, hypercardioid polar pattern ES905/ML Rigid-pipe condenser, MicroLine polar pattern ES905/C ES905/H ES905/ML DUAL-ELEMENT MICROPHONES ES Dual element condenser flexible gooseneck design Plugs directly to XLRF-type panel-mount or cable connector V phantom power ES Dual element condenser rigid-pipe design with ball-in socket base for permanent mounting to flat surface Remote mute switch with three modes and LED indicator light. ES Dual element condenser rigid-pipe with ball-in socket design on portable base ES993 ES995 ES991 (see page 25 for ESE Series interchangeable elements) Specifications ES905 ES991 ES993 ES995 Element Condenser Two Condensers Two Condensers Two Condensers Polar Pattern C : Cardioid Cardioid Cardioid Cardioid H : Hypercardioid ML : MicroLine Frequency Response C : 30-20,000 Hz 90-15,000 Hz 90-15,000 Hz 90-15,000 Hz H : 80-20,000 Hz ML : 30-20,000 Hz Open Circuit Sensitivity C : 40 db (10.0 mv) 41 db (8.9 mv) 41 db (8.9 mv) 41 db (8.9 mv) H : 40 db (10.0 mv) ML : 35 db (17.7 mv) Impedance 250 Ω 250 Ω 250 Ω 250 Ω Maximum Input Sound Level C : 138 db SPL 138 db SPL 138 db SPL 138 db SPL 1 khz at 1% T.H.D. H : 138 db SPL ML : 133 db SPL Signal-to-Noise Ratio C : 65 db 65 db 65 db 65 db 1 khz at 1 Pa H : 65 db ML : 68 db Low Frequency Roll-off 80 Hz, 12 db/octave 120 Hz, 12 db/octave 120 Hz, 12 db/octave 120 Hz, 12 db/octave Phantom Power Requirement 11-52V DC 11-52V DC 11-52V DC 11-52V DC Output Connector Integral 3-pin XLRM-type Integral 6-pin Neutrik XLRM Two 3-pin XLRM-type Integral 6-pin Neutrik XLRM Length 426 mm 548 mm 470 mm 495 mm ML : 545 mm Accessories Furnished AT8536 Power Module AT8407 Stand Clamp AT8510 Power Module Switch Cover Label AT8109 Windscreen 6-pin panel mount XLRF Screws 9.1 m six conductor cable 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

29 27 ES933 HANGING MICROPHONES Miniature condenser suspension with interchangeable capsules available in black or white. Fixed length 23.3 mm except ML version mm. XLRM output connector with recessed flat response, low-roll-off switch. Integral 15.2 m long cable. Operates from 11-52V phantom power. C/H/O includes AT8109 snap-on foam windscreen, AT8452 steel hanger and AT8536 power module; ML includes AT8138 foam windscreen, AT8452 steel hanger and AT8536 power module. Windscreens and steel hangers also available in white. ES933/C Miniature condenser hanging, cardioid polar pattern ES933/C ES933/H ES933/O ES933W/C White version ES933/C ES933/ML ES933/O Miniature condenser hanging, omnidirectional polar pattern ES933W/O White version ES933/O ES933/H Miniature condenser hanging, hypercardioid polar pattern ES933W/H White version ES933/H ES933/ML Miniature condenser hanging, MicroLine polar pattern ES933W/ML White version ES933/ML (see page 25 for ESE Series interchangeable elements) Specifications ES933/C ES933/H ES933/ML Element Condenser Condenser Condenser Polar Pattern Cardioid Hypercardioid MicroLine Frequency Response 30-20,000 Hz 80-20,000 Hz 30-20,000 Hz Open Circuit Sensitivity 40 db (10.0 mv) 40 db (10.0 mv) 35 db (17.7 mv) re 1 V at 1 Pa Impedance 250 Ω 250 Ω 250 Ω 1000ohms without power module Maximum Input Sound Level 138 db SPL 138 db SPL 133 db SPL 1 khz at 1% T.H.D. Signal-to-Noise Ratio 65 db 65 db 68 db 1 khz at 1 Pa Low Frequency Roll-off 80 Hz, 12 db/octave 80 Hz, 12 db/octave 80 Hz, 12 db/octave Phantom Power Requirement 11-52V DC 11-52V DC 11-52V DC Output Connector Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Dimensions 23.3 mm long; Ø 8.4 mm 23.3 mm long; Ø 8.4 mm mm long; Ø 8 mm Accessories Furnished AT8452 Steel hanger AT8452 Steel hanger AT8452 Steel hanger AT8536 Power Module AT8536 Power Module AT8536 Power Module AT8109 Windscreen AT8109 Windscreen AT8138 Windscreen 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL

30 28 engineered sound s ( PC 309-MC 230 ) BOUNDARY MICROPHONES ES Omnidirectional fixed charge condenser boundary For table or ceiling mounting in 15 / 16 (24 mm) diameter hole. Operates on 9-52V phantom power only. Power module is built-in, integral XLRM-type output. ES945W White finished version of ES945 ES Cardioid wide range fixed charge condenser boundary For table or ceiling mounting in 15 / 16 (24 mm) diameter hole. Operates on 9-52V phantom power only. Power module is built-in, integral XLRM-type output. ES947W White finished version of ES947 ES Cardioid wide range fixed charge condenser boundary Operates on 9-52V phantom power with built in recessed switch for flat or low-roll-off response. Supplied with 7.6 m output cable terminated in TA3F and XLRM type plugs. ES945W ES947 ES961W White version of ES961 ES961P Cardioid wide range fixed charge condenser boundary with 1/4 TRS plug on bottom of plate Operates on 9-52V phantom power with built in recessed switch for flat or low-roll-off response and a field replaceable element. Permanently mounted with a 1/4" TRS phone plug. ES961 ES961P Specifications ES945 ES947 ES961 ES961P Element Condenser Condenser Condenser Condenser Polar Pattern Omnidirectional Cardioid Cardioid Cardioid Frequency Response 30-20,000 Hz 30-20,000 Hz 30-20,000 Hz 30-20,000 Hz Open Circuit Sensitivity 42 db (7.9 mv) 42 db (7.9 mv) 33 db (22.4 mv) 33 db (22.4 mv) Impedance 200 Ω 200 Ω 200 Ω 200 Ω Maximum Input Sound Level 142 db SPL 142 db SPL 130 db SPL 130 db SPL 1 khz at 1% T.H.D. Dynamic Range 112 db 113 db 103 db 103 db 1 khz at Max SPL Signal-to-Noise Ratio 64 db 65 db 67 db 67 db 1 khz at 1 Pa Low Frequency Roll-off 150 Hz, 6 db/octave 150 Hz, 6 db/octave Phantom Power Requirement 9-52V DC 9-52V DC 9-52V DC 9-52V DC Output Connector Integral 3-pin XLRM-type Integral 3-pin XLRM-type TB3M 1/4 (6.35 mm) TRS plug Dimensions 69 mm long; Ø 28 mm 69 mm long; Ø 30 mm 91.3 mm length; 73 mm width 91.3 mm length; 73 mm width Accessories Furnished One pair isolators One pair isolators Soft protective pouch Soft protective pouch 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL European professional price guide 2004, prices in Euro EX-VAT 1

31 29 LAVALIER MICROPHONES ES943/C Condenser lavalier, cardioid polar pattern With permanently attached 1.4 m cable connected to an AT8536 power module with recessed switch for flat response or low-roll-off. Operates on 11-52V phantom power supply. ES943/O Condenser lavalier, omnidirectional polar pattern ES943/O ES943/C LAVALIER MICROPHONES FOR WIRELESS ( PC 458-MC 140) See page 36, Wireless Essentials ES943cW/C See p.36 Condenser lavalier, cardioid polar pattern. Terminated for use with wireless HF A-T UniPak ES943cW/O See p.36 Condenser lavalier, omnidirectional polar pattern.terminated for use with wireless HF A-T UniPak ACCESSORIES ( PC 630-MC 510) AT Power module supplied with ES933/ ES943/ ES905 HANDHELD MICROPHONE ES Vocal handheld condenser with internal shock mount and hypercardioid polar pattern Accepts interchangeable elements (see page 21, elements AT853x-ELE). Operates on 11-52V DC phantom power supply. ES973 Specifications ES943/C ES943/O ES973 Element Condenser Condenser Condenser Polar Pattern Cardioid Omnidirectional Hypercardioid Frequency Response 30-20,000 Hz 30-20,000 Hz 80-15,000 Hz Open Circuit Sensitivity 40 db (10 mv) 40 db (10 mv) 41 db (8.9 mv) Impedance 250 Ω 250 Ω 250 Ω Maximum Input Sound Level 138 db SPL 138 db SPL 144 db SPL 1 khz at 1% T.H.D. Dynamic Range 109 db 109 db 117 db 1 khz at Max SPL Signal-to-Noise Ratio 65 db 65 db 67 db 1 khz at 1 Pa Low Frequency Roll-off 80 Hz, 12 db/octave 80 Hz, 12 db/octave Phantom Power Requirement 11-52V DC 11-52V DC 11-52V DC Output Connector 3-pin XLRM-type (power module) 3-pin XLRM-type (power module) Integral 3-pin XLRM-type Dimensions 23.3 mm long; Ø 8.4 mm 23.3 mm long; Ø 8.4 mm mm long; 37.7 mm head diameter Accessories Furnished AT8110 Windscreen AT8110 Windscreen AT8122 Windscreen AT8460 Clothing clip AT8460 Clothing clip AT8405 Stand clamp AT8536 Power Module AT8536 Power Module Protective pouch 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db SPL

32 30 artist elite wireless transmitters ( PC 480-MC 130 ) All transmitters offer rugged, ergonomic metal bodies, programmable features, soft-touch controls, and 10 mw/35 mw switchable RF power All components store up to five preset configurations, with customized names if desired All components operates on two 1.5V AA batteries AEW-T3300 UHF SERIES ARTIST ELITE WIRELESS TRANSMITTERS (4000 & 5000) AEW-T Cardioid condenser UHF transmitter Including AT8456a stand clamp. The same element as in the legendary AT4033 AEW-T Cardioid large diaphragm condenser UHF transmitter Including AT8456a stand clamp. The same large-diaphragm element as in the AT4050 AEW-T5400 AEW-T UHF Cardioid dynamic transmitter Including AT8456a stand clamp. The same element used in the AE4100. AEW-T UHF Hypercardioid dynamic transmitter Including AT8456a stand clamp. The same element used in the AE6100. AEW-T /5000 UniPak TRANSMITTER AEW-T UHF UniPak transmitter Compatible with the wireless essentials range (page 36). Rugged, ergonomic metal housing. Includes field-replaceable helical and flexiblewhip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. AEW-T6100 AEW-TB Transmitter bag for AEW Series Holds 4 handheld transmitters and 4 body pack transmitters (included with all 5000 Series systems, page 32). AEW-T1000 AEW-TB44 Specifications AEW-T1000 UniPak Handheld Transmitters RF Power Output Hi-35 mw, Low-10 mw Hi-35 mw, Low-10 mw Dynamic Range 110 db, A-weighted 110 db, A-weighted Batteries (not included) Two 1.5V AA alkaline Two 1.5V AA alkaline Current Consumption High : 185 ma High : 185 ma Low : 165 ma Low : 165 ma Battery Life Approx. 8 hours (High) Approx. 6 hours (High) 10 hours (Low) 8 hours (Low) European professional price guide 2004, prices in Euro EX-VAT 1

33 artist elite wireless receivers ( PC 480-MC 130 ) SERIES RECEIVER 200 selectable UHF channels and True Diversity reception IntelliScan feature automatically finds and sets best available frequencies on all linked receivers Advanced digital Tone Lock squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality Link and coordinate multiple receiver channels High-visibility white-on-blue LCD information display Metal half-rack receiver chassis with mounting hardware All AEW components store up to five preset configurations, with user-definable names if desired AEW-R4100 AEW-R Frequency-agile true diversity UHF receiver ACCESSORIES (PC 458-MC 140) AT8628B Joining plate kit for two AEW-R4100 receivers in a single 19 space rack 5000 SERIES RECEIVER Two independent receivers in a single housing 200 selectable UHF channels and True Diversity reception IntelliScan feature automatically finds and sets best available frequencies on all linked receivers On-board Ethernet interface for monitoring and controlling system parameters with included software Advanced digital Tone Lock squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality AEW-R Frequency-agile true diversity UHF dual receiver with ethernet connection Included CD-Rom with computer interface software Receiver Specifications Receiving System Dual independent RF sections, automatic switching diversity Image Rejection 60 db typical Signal-to-Noise 115 db at 40 khz deviation (IEC weighted), Ratio maximum modulation 75 khz Total Harmonic 1% (10 khz deviation at 1 khz) Distortion Sensitivity 20 dbµv (S/N 60 db at 5 khz deviation, IEC weighted) Audio Output (ATTN switch at 0 ) Instrument : 50 mv (at 1kHz, ±5 khz deviation, 10k ohms load) Microphone : 25 mv (at 1kHz, ±5 khz deviation, 10k ohms load) Computer Ethernet 10BaseT, RJ45 connector Interface* proprietary software supplied on CD-Rom Dimensions 5000 Series : 482 mm x 44 mm x mm (W x H x D) 4000 Series : 211 mm x 44 mm x 235 mm (W x H x D) Net Weight 5000 Series : 4 kg Series : 1.7 kg Accessories Included Two flexible UHF half-wave antennas, Link cable, Detachable IEC-type cable, rack mount adaptors *With 5000 Series receivers only. AEW-R5200

34 32 artist elite wireless systems ( PC 480-MC 130 ) 5000 SERIES COMPLETE SYSTEMS AEW AEW-R5200 dual receiver and two AEW-T1000 UniPak transmitters AEW AEW-R5200 dual receiver and two AEW-T3300 handheld cardioid condenser /transmitters AEW AEW-R5200 dual receiver and two AEW-T4100 handheld cardioid dynamic /transmitters AEW AEW-R5200 dual receiver and two AEW-T5400 handheld cardioid condenser /transmitters AEW AEW-R5200 dual receiver and two AEW-T6100 handheld hypercardioid dynamic /transmitters AEW AEW-R5200 dual receiver, AEW-T1000 UniPak transmitter and AEW-T3300 handheld cardioid condenser /transmitter AEW AEW-R5200 dual receiver, AEW-T1000 UniPak transmitter and AEW-T4100 handheld cardioid dynamic /transmitter AEW AEW-R5200 dual receiver, AEW-T1000 UniPak transmitter and AEW-T5400 handheld cardioid condenser /transmitter AEW AEW-R5200 dual receiver, AEW-T1000 UniPak transmitter and AEW-T6100 handheld hypercardioid dynamic /transmitter 4000 SERIES COMPLETE SYSTEMS AEW AEW-R4100 receiver and AEW-T1000 UniPak transmitter AEW AEW-R4100 receiver and AEW-T3300 handheld cardioid condenser /transmitter AEW AEW-R4100 receiver and AEW-T4100 handheld cardioid dynamic /transmitter AEW AEW-R4100 receiver and AEW-T5400 handheld cardioid condenser /transmitter AEW AEW-R4100 receiver and AEW-T6100 handheld hypercardioid dynamic /transmitter See page 36, Wireless Essentials For use with all Audio-Technica UniPak Wireless Systems. See page 37, Wireless Accessories Overall System Specifications UHF Operating Frequency UK Band to MHz (Great-Britain) EU Band to MHz (Continental Europe) C Band to MHz (Special order product only) D Band to MHz (Special order product only) E Band to MHz (Special order product only) Number of Channels 200 total Frequency Stability ±0.005%, Phase Lock Loop frequency control Modulation Mode FM Normal Deviation ±5 khz Operating Range 60 m (300 ) typical Operating Temperature 5 C to 45 C Range Frequency Response 70 Hz to 15 khz European professional price guide 2004, prices in Euro EX-VAT 1

35 3000 series wireless systems ( PC 468-MC 120 ) 33 For the wireless user ready to step up to an advanced UHF system, the 3000 Series is the solution. The 3000 Series is a 200-channel frequency-agile UHF wireless designed for a wide range of applications including live performance, regional touring companies, fixed installation, public address, and houses of worship. All components in the 3000 Series have soft-touch controls for quick, easy access to the most important functions during set-up and operation. And the system is compatible with the entire line of Wireless Essentials mics and cables (see page 36). ATW Handheld transmitter system ATW-T341 handheld /transmitter with AE4100 dynamic capsule ATW-R310 receiver ATW Series UniPak system ATW-R310 receiver ATW-T310 UniPak transmitter ATW-3110/G Series UniPak guitar system With AT8319 instrument cable ATW-T3110 UniPak transmitter system ATW-3110/P UniPak system with AT829cW AT829cW miniature cardioid condenser mic. ATW-T3110 UniPak transmitter system ATW-3110/P UniPak system with AT899cW AT899cW subminiature omnidirectional condenser mic. ATW-T3110 UniPak transmitter system ATW-3110/P UniPak system with AT831aW AT831aW miniature cardioid condenser mic. ATW-T3110 UniPak transmitter system ATW-3110/P UniPak system with MT838cW MT838cW omnidirectional condenser Lavalier ATW-T3110 UniPak transmitter system ATW-3110/H UniPak system with PRO8HEcW PRO8HEcW headworn hypercardioid dynamic ATW-T3110 UniPak transmitter system ATW-3110/HC UniPak system with ATM75cW ATM75cW headworn cardioid condenser ATW-T3110 UniPak transmitter system ATW-3110/HC UniPak system with ATM73cW ATM73cW professional headworn cardioid condenser ATW-T3110 UniPak transmitter system ATW-T310 ATW-R310 ATW-T SERIES TRANSMITTERS ATW-T Series UniPak transmitter ATW-T Series handheld / transmitter with cardioid dynamic element 3000 SERIES RECEIVER ATW-R UHF diversity receiver with 200 frequencies ACCESSORIES (PC 458-MC 140) AT Joining plate kit for mounting two 3000 series receivers in a single 19 rack space Overall System Specifications EX Operating Frequency UHF MHz to MHz UK Operating Frequency UHF MHz to MHz Number of Channels 200 total Frequency Stability ±0.005% Phase Lock Loop frenquency control Modulation Mode FM Normal Deviation ±10 khz Operating Range 100 m (300 ) typical Operating Temperature Range 5 C to 45 C Frequency Response 70 Hz to 15 khz ATW-R310 Receiver Specifications Receiving System Dual independant receivers, automatic-switching diversity Image Rejection 60 db nominal, 55 db minimum Signal-to-Noise Ratio 110 db at 35 khz deviation (IEC-weighted), maximum modulation 75 khz Total Harmonic Distorsion 1% (10 khz deviation at 1 khz) Sensitivity 24 dbµv (S/B 60 db at 5 khz deviation, IEC-weighted) Audio Output Unbalanced : 50 mv (10k ohms load), 1/4 phone jack Balanced : 32 mv (10k ohms load), XLRM-type Dimensions 210 mm x 49 mm x 176 mm (W x H x D) Weight 1.1 kg (2.4 lbs) Accessories Furnished Two flexible UHF antennas, rack mount adaptors Optional System Accessory AT8630 Joining-plate kit, mounts two ATW-R310 receivers in one rack space Specifications ATW-T310 UniPak Transmitter ATW-T341 Handheld Transmitter RF Power Output High: 30 mw, Low: 10 mw 10 mw nominal Dynamic Range 110 db, A-weighted 110 db, A-weighted Microphone Element Dynamic cardioid Batteries (not included) Two 1.5V AA alkaline Two 1.5V AA alkaline Current Consumption High: 200 ma ; Low: 150 ma typical High: 230 ma ; Low: 180 ma typical Battery Life Approx. 6 hours (High); 8 hours (Low) Approx. 6 hours (High); 8 hours (Low) Dimensions 66 mm x 87 mm x 24 mm (W x H x D) 237 mm long - 48 mm dia. Weight (without battery) 80 grams 280 grams Accessories Included AT8456a Stand clamp

36 series wireless systems ( PC 456-MC 120 ) Designed for both the performance and contractor markets, the 1600 series offers an affordable UHF solution with a choice of handheld or body pack transmitters. The ATW-R160 receiver, a robust 1/2 rack metal unit, features an independent diversity switching, frequency scan function across 16 pre-selected channels (accessed by a rotary switch on the transmitters) and comes complete with A/C power supply and rackmount adaptors as standard. ATW UniPak system ATW-T161 UniPak transmitter ATW-R160 receiver ATW Handheld dynamic system ATW-T162 handheld hypercardioid /transmitter with dynamic capsule ATW-R160 receiver ATW Handheld condenser system ATW-T163 handheld /transmitter with condenser capsule ATW-R160 receiver ATW-1661/G Series guitar wireless system AT8319 instrument cable ATW-1661 UniPak transmitter system ATW-1661/P UniPak system with AT829cW AT829cW miniature cardioid condenser mic ATW-1661 UniPak transmitter system ATW-1661/P UniPak system with AT899cW AT899cW subminiature omnidirectional condenser mic ATW-1661 UniPak transmitter system ATW-1661/P UniPak system with AT831aW AT831aW miniature cardioid condenser mic ATW-1661 UniPak transmitter system ATW-1661/P UniPak system with MT838cW MT838cW omnidirectional condenser lavalier ATW-1661 UniPak transmitter system ATW-1661/H UniPak system with PRO8HEcW PRO8HEcW headworn hypecardioid dynamic ATW-1661 UniPak transmitter system ATW-1661/HC UniPak system with ATM75cW ATM75cW headworn cardioid condenser ATW-1661 UniPak transmitter system ATW-1661/HC UniPak system with ATM73cW ATM73cW professional headworn cardioid condenser ATW-1661 UniPak transmitter system TRANSMITTERS ATW-T Series UniPak transmitter ATW-T Handheld /transmitter with dynamic capsule ATW-T163 TBA Handheld /transmitter with condenser capsule RECEIVER ATW-R Series UHF true diversity receiver ATW-T162 Overall System Specifications EX Operating Frequency UHF MHz to MHz UK Operating Frequency UHF MHz to MHz Number of Channels 16 total Frequency Stability ±0.005% Phase Lock Loop frenquency control Modulation Mode FM Normal Deviation ±10 khz Operating Range 100 m (300 ) typical Dynamic Range 110 db, A-weighted Frequency Response 70 Hz to 15 khz ATW-R160 Receiver Specifications Receiving System Image Rejection Signal-to-Noise Ratio DHT 1% Open Circuit Sensitivity 15 dbµv (S/B 60 db) Dual independant receivers, automatic-switching diversity 55 db minimum 105 db at 22.5 khz deviation (IEC-weighted), Audio Output Unbalanced: 52 mv (10k ohms load), 1/4 phone jack Balanced: 32 mv (10k ohms load), XLRM-type Dimensions 210 mm x 49 mm x 195 mm (W x H x D) Weight 1.1 kg Accessories Furnished Optional System Accessory ATW-R160 Two flexible UHF antennas, rack mount adaptors AT8616 joining-plate kit mounts two ATW-R160 receivers in one rack space ATW-T161 Transmitter Specifications RF Power Output Conforms to national regulations Dynamic Range UniPak Transmitter 110 db Handheld Transmitter 110 db Microphone Element ATW-T162 Dynamic hypercardioid ATW-T163 Condenser cardioid Batteries (not included) Two 1.5V AA alkaline Current consumption 160 ma Battery Life UniPak Transmitter Approx. 6 hours (High) or 8 hours (Low) Handheld Transmitters Approx. 8 hours (no High position) UniPak Dimensions 65 mm x 87 mm x 24 mm (W x H x D) Weight (without battery) UniPak Transmitter 90 grams Handheld Transmitter 240 grams Accessories Included (ATW-T162) AT8456a Stand clamp RECEIVER ACCESSORIES (PC 458-MC 140) AT Joining plate kit for mounting two ATW-R160 receivers in a single 19 one rack space. ATW-RA Antenna kit, mounts antennas (included) at the front of receiver. ATW-T161 See page 36, Wireless Essentials For use with all Audio-Technica UniPak Wireless Systems. See page 37, Wireless Accessories European professional price guide 2004, prices in Euro EX-VAT 1

37 1400 series wireless systems ( PC 467-MC 120 ) 35 The 1400 Series true diversity wireless systems feature: Interference resistant UHF band operation Convenient detachable front mounted antennas Rugged metal receiver housing ATW-R14 TRUE DIVERSITY UHF WIRELESS SYSTEMS ATW UniPak transmitter system ATW-T51 UniPak transmitter ATW-R14 receiver ATW Handheld dynamic transmitter system ATW-T52 handheld /transmitter with Hi-ENERGY dynamic capsule ATW-R14 receiver ATW-1451/G Series guitar wireless system AT8319 instrument cable ATW-1451 UniPak system ATW-1451/P UniPak system with AT829cW AT829cW miniature cardioid condenser mic ATW-1451 UniPak system ATW-1451/H UniPak system with PRO8HEcW PRO8HEcW headworn hypercardioid dynamic ATW-1451 UniPak system ATW-1451/HC UniPak system with ATM75cW ATM75cW headworn cardioid condenser ATW-1451 UniPak system ATW-1451/HC UniPak system with ATM73cW ATM73cW professional headworn cardioid condenser ATW-1451 UniPak system TRANSMITTERS ATW-T Serie UniPak transmitter ATW-T Handheld /transmitter with Hi-ENERGY dynamic capsule RECEIVER ATW-R14 P.O.A Series UHF true diversity receiver ATW-T52 Overall System Specifications EX Operating Frequency UHF MHz to MHz UK Operating Frequency UHF MHz to MHz Number of Channels Fixed channel Frequency Stability ±0.005%, Modulation Mode FM Normal Deviation ±15 khz Operating Range 100 m (300 ) typical Operating Temperature Range 4 C to 43 C Frequency Response 100 Hz to 15 khz ATW-R14 Receiver Specifications Receiving System Dual independant receivers, automatic-switching diversity Image Rejection 45 db minimum Signal-to-Noise Ratio 95 db at 10 khz deviation (IEC-weighted), DHT 1% Open Circuit Sensitivity 20 dbµv (S/B 60 db) Audio Output Unbalanced: 280 mv (10k ohms load), 1/4 phone jack Balanced: 160 mv (10k ohms load), XLRM-type Dimensions 210 mm x 49 mm x 251 mm Weight Accessories Furnished Optional System Accessory (W x H x D) 1.3 kg ATW-T51 Two flexible UHF antennas, rack mount adaptors AT8628 Joining-plate kit, mounts two ATW-R14 receivers in one rack space RECEIVER ACCESSORIES (PC 458-MC 140) AT8628B Joining plate kit for mounting two ATW- R14 receivers in a single 19 one rack space. Transmitter Specifications RF Power Output Dynamic Range UniPak Transmitter Handheld Transmitter Microphone Element ATW-T52 Batteries (not included) Current Consumption Battery Life UniPak Dimensions Weight (without battery) UniPak Transmitter Handheld Transmitter Conforms to national regulations 90 db 90 db Dynamic cardioid 9 V alkaline 50 ma Approx. 8 hours (High) 10 hours (Low) 110 mm H x 65 mm W x 25.4 mm D 90 g 350 g Accessories Included (ATW-T52) AT8431 stand clamp See page 36, Wireless Essentials For use with all Audio-Technica UniPak Wireless Systems. See page 37, Wireless Accessories

38 36 s for use with A-T UniPak transmitters ( PC 458-MC 140 ) All s are fitted with a 4-pin HRS connector, for use with A-T UniPak transmitters. TIE CLIP AND LAVALIER MICROPHONES AT829cW Miniature cardioid condenser AT831aW Miniature cardioid condenser (full description page 19) AT803aW Omnidirectional tie clip for broadcast applications (full description page 19) ES943cW/C Cardioid condenser lavalier, 1.4 m cable Includes windscreen and clothing clip ES943cW/O Omnidirectional condenser Lavalier, 1.4 m cable Includes windscreen and clothing clip SUB-MINIATURE MICROPHONES FOR A-T UniPak AT898cW Subminiature cardioid condenser (full description page 19) AT899cW Subminiature omnidirectional condenser (full description page 19) AT899cW-TH Beige version of AT899cW (full description page 19) MT830cW Miniature omnidirectional condenser (full description page 19) MT838cW Cardioid with clip and windscreen AT829cW AT889cW AT899cW AT831aW ATM73cW MT830cW CONFERENCE MICROPHONES FOR A-T UniPak AT857AMLcW Cardioid condenser gooseneck, 45 cm long (full description page 22) AT851cW Unidirectional condenser boundary (full description page 23) AT841aW Omnidirectional condenser boundary (full description page 23) INSTRUMENT MICROPHONES ATM35cW Cardioid condenser clip-on instrument (full description page 10) PRO35xcW Cardioid condenser clip-on instrument (full description page 14) HEADWORN MICROPHONES FOR A-T UniPak AT889cW Subminiature omnidirectional condenser Humidity and perspiration resistant. PRO8HEcW Headworn hypercardioid dynamic (full description page 14) ATM75cW Headworn cardioid condenser. (full description page 10) ATM73cW Headworn cardioid condenser (full description page 10 AT851cW AT857AMLcW European professional price guide 2004, prices in Euro EX-VAT 1

39 wireless accessories ( PC 458-MC-140 ) 37 CONNECTING CABLES FOR UNIPAK TRANSMITTERS AT XLRF cable to HRS connector; 1.50 m AT Guitar cable 6.35 mm jack to HRS connector AT8317 AT8319 ANTENNA CABLES AC BNC - BNC 4 m link cable, type RG58 AC BNC - BNC 8 m link cable, type RG8 AC50 POA BNC - BNC 16 m link cable, type RG8 AC100 POA BNC - BNC 33 m link cable, type RG8 AC12 ATW-VP10 TRANSMITTERS ACCESSORIES AT Water resistant pouch for UniPak bodypack transmitter ATW-VP Vinyl pouch for UniPak body-pack transmitter ATW-A49 ANTENNAS ATW-A Pair of ground-plane antennas with 5 / 8-27 thread for UHF wireless systems, 1400and 3000 Series ATW-A Pair of wide band dipole antennas for use with MHz UHF systems (3000, 4000 and 5000 Series) ATW-A20 DIVERSITY UHF ANTENNA DISTRIBUTIONS SYSTEMS AEW-DA550C Active unity-gain distribution amplifier for UHF bands MHz to MHz AEW-DA660D Active unity-gain distribution amplifier for UHF bands MHz to MHz AEW-DA800EU Active unity-gain distribution amplifier for UHF bands MHz to MHz AEW-DA860UK Active unity-gain distribution amplifier for UHF bands MHz to MHz AEW-DA660D

40 38 studio professional headphones ( PC 205-MC 310) PRECISION STUDIOPHONES Full-sized closed back stereo headphones for studio monitoring and home listening applications. Fully field serviceable. Terminated in a 1/4" plug. ATH-M40fs Extended-response closed-back dynamic monitor headphones ATH-D40fs Enhanced-bass closed-back dynamic monitor headphones ATH-D40fs ATH-M40fs The ATH-M30 is a closed-back dynamic headphone for mixing with high power handling for tracking sessions. 65 ohms. Terminated in a 3.5 mm connector with screw-on 6.3 mm adaptor. ATH-M30 ATH-M Closed-back dynamic monitor headphones ATH-M20 SEMI-PROFESSIONAL HEADPHONES The ATH-M20 is a closed-back dynamic headphones with neodymium magnets. Impedance 40 ohms, terminated in a 3.5 mm stereo mini plug with 6.3 mm adaptor ATH-M Closed-back headphones Specifications ATH-M40fs ATH-D40fs ATH-M30 ATH-M20 Type Closed-back dynamic Closed-back dynamic Closed-back dynamic Closed-back dynamic Driver Size 40 mm diameter 40 mm diameter 40 mm diameter 40 mm diameter Magnet Neodymium Neodymium Neodymium Neodymium Voice Coil Copper-clad aluminum wire Copper-clad aluminum wire Copper-clad aluminum wire Copper-clad aluminum wire Frequency Response 5-28,000 Hz 20-28,000 Hz 20-20,000 Hz 30-20,000 Hz Maximum Input Power 1,600 mw at 1 khz 1,600 mw at 1 khz 1,600 mw at 1 khz 1,200 mw at 1 khz Sensitivity 100 db 102 db 100 db 98 db Impedance 60 ohms 66 ohms 65 ohms 40 ohms Weight (without cable) 250 g (8.8 oz) 250 g (8.8 oz) 200 g (7.0 oz) 230 g (7.1 oz) Cables 3.4 m (11 ) 3.4 m (11 ) 3.4 m (11 ) 3.0 m (10 ) (OFC litz wire, left-side exit) (OFC litz wire, left-side exit) (OFC litz wire, left-side exit) (coiled, left-side exit) Connectors 6.3 mm (1/4 ) phone-plug 6.3 mm (1/4 ) phone-plug 3.5 mm (1/8 ) with screw-on 3.5 mm (1/8 ) stereo mini-plug and 6.3 mm (1/4 ) adaptor and 6.3 mm (1/4 ) adaptor European professional price guide 2004, prices in Euro EX-VAT 1

41 39 ATH910PRO HEADPHONES (PC 205-MC 310) Full-size closed-back dynamic headphones featuring Samarium Cobalt magnets, large diaphragm drivers. Ideal for both home listening and studio monitoring applications. Impedance 30 ohms. Terminated in a 1/4 plug. ATH910PRO ATH910PRO Closed-back headphones, 40 ohms closed-back dynamic driver size 44 mm diameter samarium-cobalt magnet voice coil: copper-clad aluminum wire frequency response: 20-22,000 Hz maximum input power: 120 mw at 1 khz sensitivity: 90 db impedance: 40 ohms weight: 205 g (without cable) cable: 3 m (10 ) connector: stereo jack 6.35 mm COMMUNICATION HEADSETS (PC MC 310) ATH-COM1 ATH-COM Monophone/dynamic boom mic combination Two 3.5 mm plugs with 1/4" adaptors. Impedance 40 ohms (headphone) / 600 ohms (). 1 open-back dynamic driver size 40 mm diameter neodymium magnet frequency response: 30-20,000 Hz maximum input power: 50 mw at 1 khz sensitivity: 91 db impedance: 40 ohms sensitivity: 55 db (1.7 mv) re 1 V at 1 Pa weight: 70 g (without cable) cable: 1.5 m (4.9 ) connectors: two 3.5 mm (1/8 ) mono mini-plugs + two gold plated 6.3 mm (1/4 ) mono plug adaptors ATH-COM Stereophone/dynamic boom mic combination Two 3.5 mm plugs with 1/4" adaptors. Impedance 40 ohms (Headphone) / 600 ohms (Microphone). ATH-COM2 2 open-back dynamic driver size 40 mm diameter neodymium magnet frequency response: 30-20,000 Hz maximum input power: 50 mw at 1 khz sensitivity: 91 db impedance: 40 ohms sensitivity: 55 db (1.7 mv) re 1 V at 1 Pa weight: 100 g (without cable) cable: 1.5 m (4.9 ) connectors: one mono and one stereo 3.5 mm (1/8 ) mini-plugs + one stereo and one mono 6.3 mm (1/4 ) gold plated plug adaptor

42 40 automatic mixers ( PC 630-MC 510) Innovative automatic mixers are microprocessor controlled for uncomplicated, automated operation. Easy to install, easy to operate and completely transparent in operation Choice of one-channel-at-a-time operation, all active, or any mix of moderator override Versatile, switchable inputs accept s or line-level devices; mic- or line-level out Individual gain controls for each channel Last on stays on so that ambient sound is never muted XLR inputs with phantom power provided for condenser mics AT-MX341a Automatic SmartMixer featuring four switchable or line channels Half rack width,1u high. Supplies 12V phantom power on each channel. AT-MX Automatic SmartMixer mixer featuring four switchable or line channels and one auxiliary input. 19" rack width 1u high. Supplies 48V phantom power on each channel. RACK MOUNT ACCESSORIES (PC 458-MC 140) AT8628B Joining plate for mounting two AT-MX341a mixers in a one rack space ACCESSORIES (PC 630-MC 510) AT8325/ Link cable (included with Smart Mixer ) Specifications AT-MX351 AT-MX341a Input Impedance Mic: 8,000 Ω Mic: 4,000 Ω Line: 50,000 Ω Line: 30,000 Ω Output Impedance Mic: 200 Ω Mic: 320 Ω Line: 300 Ω Line: 200 Ω Maximum Input Level Mic: 24 dbv Mic: 20 dbv Line: +27 dbv Line: +30 dbv Maximum Gain 73 db 70 db Frequency Response ( 3 db) 40 Hz to 22 khz 60 Hz to 30 khz Equivalent Input Noise 128 dbv (150 Ω) 120 dbv (150 Ω) Microphone Phantom Power +48V DC +12V DC Power Supply 120V/230V AC 12AC, 150 ma Operating Temperature 0 to 40 C 0 to 40 C Dimensions (including feet, W 430 mm W 210 mm knobs and connectors) D 238 mm D 238 mm H 44 mm H 44 mm Weight 3.1 kg 1.6 kg Accessories Furnished AT8325/1.0 link cable AT8325/1.0 link cable Rack-mount adaptors Rack-mount adaptors AC power cable AC power supply Comparison Chart AT-MX351 AT-MX341a Automatic mic/line balanced inputs 4 4 Unbalanced Aux input 1 Priority pre-select switch for each yes yes Automatic threshold setting yes Single threshold setting for all channels yes Phantom power selectable for each channel 48V 12V Switchable manual mode yes yes Master output level control yes yes Individual gain controls for each channels yes yes Limiter on each mic/line channel yes Output level meter with Peak and RMS mode yes yes Off attenuation for each input adjustable to: 40 db 20 db TTL logic output yes yes Closure control of each input yes Pre- or post-controller audio output yes Switchable NOMA operation yes Headphone output with adjustable level yes 19 rack mounting space (1U) full 1/2 Rack-mount adaptors included yes yes AT-MX341a AT-MX351 European professional price guide 2004, prices in Euro EX-VAT 1

43 accessories, power supplies, UniTools ( PC 630-MC 510) and attenuators ( PC 315-MC 410) 41 POWER SUPPLIES (PC 630-MC 510) AT Single channel 48V DC phantom supply (AC power adaptor included) This line-powered device allow the use of remotepowered s with systems that do not supply phantom power. Each unit features a highlyregulated power supply which provides a constant voltage source, even with a heavily-loaded input. The regulator IC is internally protected to prevent overheating or damage even if shorted. The rugged steel case is finished in enamel and provides shielding from electrostatic interference. AT8801 PRE-AMPLIFIERS, ADAPTORS ( PC 630-MC 510) AT V AA battery/phantom mic pre-amplifier with bass roll-off. TA3M to XLRM 3-pin AT Phantom only mic pre-amplifier for AT853Rx. TA3M to XLRM 3-pin AT8533x Phantom only in line pre-amplifier with bass rolloff and 7.60 m cable with TA3F to XLRM 3-pin AT8531 AT8533 ATTENUATORS ( PC 315-MC 410) AT Adjustable In-line Attenuator Prevents overload of sensitive input stages Provides -10 db, -20 db or -30 db attenuation Compatible for use in phantom power applications Durable steel case provides optimum shielding from hum For use with balanced Lo-Z s Can be plugged directly into a female 3-pin chassismount connector AT8533x AT8202 UNITOOLS (PC 630-MC 510) Phantom-powered in-line accessories overcome commonly-encountered sound installation challenges quickly, easily and effectively. Available in four function-specific models, UniTools are intended primarily for use with UniPoint and similar condenser s. They have professional XLR-type input/output connectors, and require balanced cables and 24-48V DC phantom power for operation. ("In" and "Out" markings refer to the mic audio.) All units permit phantom voltage to pass on to the. Featuring rugged steel housings, UniTools can be installed anywhere in-line, either at the mixer input or near the mic. AT UniMix 2-to-1 mic combiner with balance control Combines the output from two s into one channel. Balance control attenuates each by 6 db (typical) at midpoint. AT UniGate voice-operated switch with adjustable threshold Automatically attenuates a channel when is not in use. Threshold adjusts to compensate for the vocal dynamics of individual speakers and for situations with excessive background noise. LED indicates when gate is open. AT UniSteep 80 Hz mic hi-pass filter Provides a steep 18 db/octave low-frequency attenuation to improve the quality of sound pickup under difficult conditions without affecting voice quality. AT UniMute mic attenuator with user-definable switch function Versatile attenuator permits easy in-line switch installation and flexible application. Type of external single-pole switch the user supplies determines muting function; closed contact causes muting. Use for on/off, push-to-talk, push-to-mute, etc. (Additional, isolated poles on the switch may be used to control logic-level DC circuits.) AT8681 AT8683 AT8682 AT8684

44 42 accessories, clamps, mounts, suspensions ( PC 315-MC 410) MICROPHONE CLAMPS AT Standard slip-in clamp for tapered s AT8405a 9.80 Snap-in mic clamp, metal base, for 21 mm body diameter mics AT8406a 9.20 Tapered slip-in mic clamp, metal base for all tapered mics AT Universal mic clamp, spring loaded clip, metal base. Fits most mics with diameter 15 to 25 mm AT Quiet-Flex stand clamp for tapered Artist Elite s AT Isolation clamp in a secure locking mount compatable with 5 / 8-27 threaded stands HANDHELD TRANSMITTER MICROPHONE CLAMPS AT8456a Clamp for wireless handheld s in the Artist Elite AEW and 3000 Series AT Clamp for handheld wireless in the 1400 Series DESK STANDS AT Desk stand for all 5 / 8-27 mic holders AT Desk stand with thru-hole in 5 / 8-27 stud for cable passage. UniPoint AM and ES range AT8615A QM plug-in desk stand; XLRF in, XLRM out for all QM mics AT8615RS Oval desk stand: XLR female with switch ACCESSORIES FOR MINIATURE MICROPHONES AT UniMount instrument mount ATM35/AT803/AT831/AT829/PRO35x/PRO7a AT Instrument adaptor ATM35/AT803/AT831/ AT829/PRO35x/PRO7a for acoustic guitar/violin Because the American bases have a 5 / 8 thread and European s have a standard 3 / 8 thread, the stands have a thread of 5 / 8 which allows for an adaptor to be used. ADAPTORS AND STAND ACCESSORIES AT Plastic thread adaptor converts 3 / 8 stands to 5 / 8 thread AT8405a AT8407 AT8470 AT Swivel mount clamp adaptor. Provides unlimited number of angles/ positions. Compatable with 5 / 8-27 threaded stands CLAMPS AND SHOCK MOUNTS FOR STUDIO MICROPHONES AT Stand clamp with 5 / 8-27 thread for AT4033a /AT4040/AT4050/AT4047SV AT8471 AT8430 AT8418 AT Pop filter for use with AT8449 shock mount AT Shock mount for AT4060 AT Shock mount for AT4033a/AT4040/AT4050 AT8449SV Shock mount for AT4047SV AT8410a AT8415 AT Shock mount for AT3035/AT3060 UNIVERSAL SHOCK MOUNTS AT8410a Shock mount, spring loaded, fits most mics with diameter 15 to 22 mm AT Low-profile shock mount with flexible bands. Fits most mics AT8601 AT8615a European professional price guide 2004, prices in Euro EX-VAT 1

45 43 AT8411 CLAMPS AND ACCESSORIES FOR TIE CLIP MICROPHONES AT Lavalier neck cord AT Plastic clothing clip, fits AT803/AT829/ AT831 AT Plastic double clothing clip, fits AT803/ AT831/AT829 AT Metal tie tac, fits AT803/AT831 AT Wire clothing clip, AT803/AT831/AT829 AT Metal clothing clip, for MT830 AT Plastic clothing clip, for AT829 AT Tie clip for AT805/MT350 AT Clothing clip for ES943 AT8414 AT8417 AT899 MINIATURE MICROPHONE ACCESSORIES AT Clothing clip base for AT899 with single and double holders AT8461-TH Clothing clip base for AT899 with single and double adaptors in beige AT899AK Accessory kit for AT899 models in black AT899AK-TH Accessory kit for AT899 models in beige AT898AK Accessory kit for AT898 SUSPENSION ACCESSORIES FOR FIXED INSTALLATION MICROPHONES AT Shock mount for all UniPoint AM and ES range. For fixed installation AT Custom stand adaptor for AT853 and AT853W fits 5 / 8 "-27 stands AT8438WH As AT8438 in white AT Wire hanger adaptor for overhead applications with AT853 and PRO45 AT8451WH White version of AT8451 AT Wire hanger adaptor for overhead MicroLine ES933 AT8452WH White version of AT8452 AT Thread mount adaptor for ES range AT Shock mount for ES gooseneck s, ES935 and ES915 AT8616x Locking ring/ isolator for Engineered Sound QM Models AT8646AM Shockmount plate with 5 / 8 "-27 threaded adaptor mount AT8646QM Shockmount plate with XLRF connector AT8647QM/S Shockmount plate for quick mount s with on/off switch for fixed installation ACCESSORIES FOR HEADWORN MICROPHONES AT Cable clothing clip for AT889cW/ATM73/ ATM75/PRO8HE AT8646AM AT8646QM AT8647QM/S

46 44 windscreens (PC-315-MC410) WINDSCREENS FOR 30 AND 40 SERIES MICROPHONES AT8137 AT Large studio foam windscreen for AT4033a / AT4040 / AT4050/AT4047SV/ AT3035/ AT3060 AT Metal slip-on pop filter for AT4041/ AT4049 / AT4051/ AT4053 (for ultimate pop and wind protection, use an AT8114 in addition) AT Small egg-shaped foam windscreen AT8106 WINDSCREENS FOR VOCAL AND INSTRUMENT MICROPHONES AT Large cylindrical foam windscreen for AT804 / AT804L AT Thin cylindrical foam windscreen for ATM29HE AT Large cylindrical foam windscreen for ATM29HE / ATM63HE AT Ball-shaped foam windscreen for ATM27HE / ATM31a / ATM41HE / ATM61HE AT Large-pore egg-shaped foam windscreen for ATM63HE AT Large foam windscreen for ATM25 / AT822 / PRO25 / AT825 / PRO4L AT Small foam windscreen for ES973 AT Small egg-shaped foam windscreen for ATM10a / ATM33a AT8101 AT8136 AT8111 AT8112 AT8115 AT8120 WINDSCREENS FOR SHOTGUN MICROPHONES AT Shotgun windscreen for AT835b AT Shotgun windscreen for AT897/ AT835ST/ AT4073a AT Shotgun windscreen for AT815b/ AT4071a/ AT815ST AT8135 AT8132 AT8134 European professional price guide 2004, prices in Euro EX-VAT 1

47 45 HEADWORN MICROPHONE WINDSCREENS AT Windscreen for headworn ATM73 AT Large foam golfball windscreen for ATM73 AT Small foam torpedo windscreen for headworn mic ATM73 AT8139L 6.80 Large foam windscreen for headworn mic ATM75 / PRO8HE AT8139S 6.80 Small foam windscreen for headworn mic ATM75 / PRO8HE AT8142A 2.80 Foam temple pads (pair) for headworn mic ATM75 / PRO8HE MINIATURE AT899 MICROPHONE ACCESSORIES AT Element covers (pack of 3) AT8150-TH Beige AT899 element covers (pack of 3) AT AT899 windscreen (pack of 3) AT8151-TH Beige AT899 windscreen (pack of 3) AT8150 AT8150-TH AT8151 AT8151-TH AT81395 AT8119 AT8125 AT8128 AT8142B 2.80 Foam temple pads (pair) for headworn mic ATM73 AT Coloured windscreen pack suitable for ATM75 / PRO8HE, set of 4 (pink, purple, green and yellow) UNIPOINT, PROPOINT AND ENGINEERED SOUND WINDSCREENS AT Small 2-stage foam windscreen for use with AT853 / AT859 / AT857 AT8102WH 9.80 White version of AT8102 AT8104a Small metal lockable windscreen with additional outer foam windscreen provided suitable for AT853 / 857 / 859 AT Snap-on foam windscreen for ES Series gooseneck mics AT Large high density foam windscreen for AT853 outdoor use AT8143 AT8109 AT8104a TIE CLIP MICROPHONE WINDSCREENS AT Foam windscreen for ES943 AT Mini windscreen for AT803b/ AT829 / AT831 / PRO7a AT Miniature foam windscreen for MT350 AT Subminiature foam windscreens (packet of 3) for MT830 AT Miniature foam windscreen for AT829 / AT803 / AT831 / PRO7a AT Windscreen for MicroLine All ML/suffix mics AT8138WH White version of AT8138 AT8138WH AT8117 AT8138 AT Windscreen for PRO47 / PRO49 AT8146WH 8.20 White version of AT8146 AT8116 AT8131 AT8130 AT8146

48 46 atr series s ( PC 312-MC 240) ATR Vocal or instrument for use with home or portable systems unidirectional dynamic on/off switch integral 5 m cable with 3.5 mm jack 6.35 mm adaptor and desk stand frequency response: 80-12,000 Hz ATR20 ATR50 ATR Dual unidirectional stereo condenser for use with most cameras or portable recording systems on/off switch integral short cable for camera use and with 3.5 mm jack and adapter frequency response: 70-18,000 Hz ATR Multi-purpose dynamic unidirectional dynamic vocal and instrument on/off switch metallic construction detachable 5 m XLR cable to 6.35 mm jack frequency response: 60-15,000 Hz ATR25 ATR3M ATR3M Dynamic gooseneck dynamic cardioid ideal for close talking and paging situations integral windscreen and robust construction push to talk switching facility quickmount XLR and 445 mm long frequency response: ,000 Hz ATR35S Miniature lavalier with integral battery pack omnidirectional condenser ideal for aerobics/dance/sports/reporting 6m cable with 3.5 mm jack on/off switch includes clip, 1.5V battery, windshield and 6.35 mm adapter frequency response: 50-18,000 Hz ATR30 ATR35S ATR Dynamic unidirectional vocal/instrument vocal / instrument, karaoke metal robust construction on/off switch includes clamp and 4.6 m XLR/XLR cable frequency response: 70-14,000 Hz ATR Telemike shotgun has two polar patterns; unidirectional or supercardioid 90 cm cable with 3.5 mm jack includes camera mount, pistol grip mount, windshield, battery and 6.35 mm adapter frequency response: 70-18,000 Hz ATR55 ATR97 ATR Low profile omnidirectional boundary operates from internal battery ideal for conferences, teleconferences on/off switch integral 1.5 m cable with 3.5 mm jack frequency response : 50-15,000 Hz European professional price guide 2004, prices in Euro EX-VAT 1

49 phonographic hi-fi cartridges cartridges and styli 47 STANDARD CARTRIDGES (PC105-MC 520) AT91BL /2 mount cartridge with conical shaped diamond tip ideal as a starter cartridge or as a replacement for older decks AT95EBL /2 mount cartridge with elliptical shaped diamond tip gives good overall performance in modestly priced decks AT120E /T AT-OC9ML/II AT101EP P mount cartridge with elliptical shaped (0.4x0.7 mm) diamond tip for improved tracking and long vinyl life ATP-2XN AT110E /2 mount cartridge with elliptical shaped (0.4x0.7 mm) diamond tip ensuring good channel balance, seperation and long vinyl life AT120E/T /2 mount cartridge with elliptical shaped (0.3x0.7 mm) diamond tip, this model gives best results in mid price range turntables AUDIOPHILE CARTRIDGES (PC105-MC 520) STANDARD STYLI (PC106-MC 520) AT440ML /2 mount cartridge with MicroLine shaped diamond tip for the most accurate tracking, seperation and performance AT-OC9ML/II / 2 moving coil cartridge with polished elliptical diamond tip, for the best in clarity, transparancy, precise stereo imaging, lower distortion and extended vinyl life ATN Genuine replacement stylus for AT91BL ATN95E Genuine replacement stylus for AT95EB ATN101EP Genuine replacement stylus for AT101EP ATN110E Genuine replacement stylus for AT110E ATN120E Genuine replacement stylus for AT120E/T PRO SERIES CARTRIDGES (PC115-MC 520) ATP-2XN /2 mount cartridge with elliptical shaped (0.4x0.7 mm) diamond tip and strengthened cantilever for the DJ market, an extra stylus is included AUDIOPHILES STYLI (PC106-MC 520 ) ATN440ML Genuine replacement stylus for AT440ML PROFESSIONAL STYLI (PC116-MC 520) ATP-N Genuine replacement stylus for ATP-2XN HI-FI ACCESSORIES (PC640-MC 510) AT Stylus cleaning fluid with applicator brush Specifications AT101EP(E) AT120E/T AT91BL(EBL) AT440ML AT-OC9ML/II ATP-2XN Mount Universal (1/2 ) 1/2 1/2 1/2 1/2 1/2 Frequency Response 20-22,000 Hz 15-25,000 Hz 20-20,000 Hz 20-20,000 Hz 15-25,000 Hz 15-22,000 Hz Channel Separation 25 db at 1 khz 29 db at 1 khz 20 db at 1 khz 20 db at 1 khz 31 db at 1 khz 23 db at 1 khz Impedance 47 kω 47 kω 47 kω 47 kω 20 kω 47 kω Output Voltage 4 mv 5.0 mv 3.5 mv 5.0 mv 0.4 mv 5.3 mv Stylus Shape Elliptical Elliptical Conical Super Elliptical Super Elliptical Elliptical Tracking Force g g g g g g Weight 5.9 g 6.5 g 5.8 g 6.5g 7.8 g 7.2 g

50 48 alphanumeric product listing Product Code Page Product Code Page Product Code Page Product Code Page Product Code Page AC AC12 37 AC25 37 AC50 37 AE AE AE AE AE AE AE AEW AEW AEW AEW AEW AEW AEW AEW AEW AEW AEW AEW AEW AEW AEW-DA550C 37 AEW-DA660D 37 AEW-DA800EU 37 AEW-DA860UK 37 AEW-R AEW-R AEW-T AEW-T AEW-T AEW-T AEW-T AEW-TB44 30 AT-0C9ML/II 47 AT101EP 47 AT110E 47 AT120E/T 47 AT AT AT AT AT4033ASM 4 AT4040SM 4 AT AT4047SVSC 5 AT4047SVSM 5 AT4049A 6 AT4049A-EL 6 AT4050SC 4 AT4050SM 4 AT4051A 6 AT4051A-EL 6 AT4053A 6 AT4053A-EL 6 AT AT4071A 16 AT4073A 16 AT440ML 47 AT4900A48 6 AT AT803AW 36 AT803B 19 AT803CB 19 AT AT804L 18 AT808G 18 AT AT AT8102WH 45 AT8104A 45 AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT8138WH 45 AT8139L 45 AT8139S 45 AT AT8142A 45 AT8142B 45 AT AT AT8146WH 45 AT AT8150-TH 45 AT AT8151-TH 45 AT AT815B 17 AT815ST 17 AT AT AT AT829CW 36 AT AT AT831AW 36 AT831B 19 AT831C 19 AT831R 19 AT AT8325/ AT835B 17 AT835ST 17 AT AT8405A 42 AT8406A 42 AT AT8410A 42 AT AT AT AT AT AT AT AT841A 23 AT841AW 36 AT841RX 23 AT AT AT AT AT AT AT AT AT8438WH 43 AT AT AT AT AT AT8449SV 42 AT AT8451WH 43 AT AT8452WH 43 AT8456A 42 AT AT AT AT AT8461-TH 43 AT AT AT AT851A 23 AT851CW 36 AT851RWX 23 AT851RX 23 AT851WA 23 AT AT AT8533X 41 AT AT853A 21 AT853C-ELE 21 AT853H-ELE 21 AT853O-ELE 21 AT853RWX 21 AT853RX 21 AT853WA 21 AT854R 18 AT857AMA 22 AT857AMLA 22 AT857AMLCW 36 AT857AMLX 22 AT857AMX 22 AT857QMA 22 AT857QMLA 22 AT859QMLX 22 AT AT AT8615A 42 AT8615RS 42 AT AT8616X 43 AT8628B 31 AT8628B 35 AT8628B 40 AT AT8646AM 43 AT8646QM 43 AT8647QM/S 43 AT AT AT AT AT AT AT871R 23 AT871RW 23 AT873R 22 AT AT889CW 36 AT891R 23 AT891R/C 23 AT895/RK 15 AT AT AT898AK 19 AT898AK 43 AT898C 19 AT898CW 36 AT AT899AK 19 AT899AK 43 AT899AK-TH 19 AT899AK-TH 43 AT899C 19 AT899C-TH 19 AT899CW 36 AT899CW-TH 36 AT91BL 47 AT95EBL 47 ATH910PRO 39 ATH-COM1 39 ATH-COM2 39 ATH-D40FS 38 ATH-M20 38 ATH-M30 38 ATH-M40FS 38 ATM10A 9 ATM23HE 11 ATM25 11 ATM27HE 11 ATM29HE 11 ATM31A 9 ATM33A 9 ATM35 10 ATM35CW 10 ATM35CW 36 ATM41HE 11 ATM61HE 11 ATM61HE/S 11 ATM63HE 11 ATM73A 10 ATM73AC 10 ATM73CW 10 ATM73CW 36 ATM75 10 ATM75C 10 ATM75CW 10 ATM75CW 36 ATM87R 9 ATM89R 9 AT-MX341A 40 AT-MX ATN101EP 47 ATN110E 47 ATN120E 47 ATN440ML 47 ATN91 47 ATN95E 47 ATP-2XN 47 ATP-N2 47 ATR20 46 ATR25 46 ATR30 46 ATR35S 46 ATR3M 46 ATR50 46 ATR55 46 ATR97 46 ATW ATW-1451/G 35 ATW-1451/H 35 ATW-1451/HC1 35 ATW-1451/HC2 35 ATW-1451/P 35 ATW ATW ATW-1661/G 34 ATW-1661/H 34 ATW-1661/HC1 34 ATW-1661/HC2 34 ATW-1661/P 34 ATW-1661/P1 34 ATW-1661/P2 34 ATW-1661/P3 34 ATW ATW ATW ATW-3110/G 33 ATW ATW-A20 37 ATW-A49 37 ATW-R14 35 ATW-R ATW-R ATW-RA1 34 ATW-T ATW-T ATW-T ATW-T ATW-T3110/H 33 ATW-T3110/HC1 33 ATW-T3110/HC2 33 ATW-T3110/P 33 ATW-T3110/P1 33 ATW-T3110/P2 33 ATW-T3110/P3 33 ATW-T ATW-T51 35 ATW-T52 35 ATW-VP10 37 ES905/C 26 ES905/H 26 ES905/ML 26 ES915/C 24 ES915/H 24 ES915/ML 24 ES915/O 24 ES917S/C 24 ES917S/H 24 ES917S/ML 24 ES917S/O 24 ES933/C 27 ES933/H 27 ES933/ML 27 ES933/O 27 ES933W/C 27 ES933W/H 27 ES933W/ML 27 ES933W/O 27 ES935/C 25 ES935/H 25 ES935/ML 25 ES935/O 25 ES935S/C 25 ES935S/H 25 ES935S/ML 25 ES935S/O 25 ES943/C 29 ES943/O 29 ES943CW/C 29 ES943CW/C 36 ES943CW/O 29 ES943CW/O 36 ES ES945W 28 ES ES947W 28 ES ES961P 28 ES961W 28 ES ES ES ES ESE-C 25 ESE-H 25 ESE-ML 25 ESE-O 25 KICK/TOM 13 KP-DRUMS 13 KP-VOCALS 13 MB1K 12 MB1K/C 12 MB2K 12 MB2K/C 12 MB3K 12 MB3K/C 12 MB4K 12 MB4K/C 12 MT350B 19 MT830C 19 MT830CW 36 MT830R 19 MT838B 19 MT838CW 36 PRO PRO-35X 14 PRO35XCW 36 PRO-37R 14 PRO42 20 PRO44 20 PRO45 20 PRO45W 20 PRO47T 20 PRO47TL 20 PRO49Q 20 PRO49QL 20 PRO-4L 14 PRO-7A 14 PRO-8HE/S 14 PRO-8HECW 36 PRO-8HEX 14 PRO SNARE/TOM 13

51 Terms, Sales Policies & Limited Warranty III Prices and Sales Policy in Europe (1) Prices featured in this catalogue are intended as an indication only of the current average prices for our products in continental Europe. The price indications exclude VAT. Please note that due to currency exchange rate fluctuations, varying taxation systems, differences in overheads and operating costs between European countries, prices may vary from country to country. As our prices are recommended prices only, product prices may also vary between dealers and between distributors. Audio-Technica Product Availability and Sales Policies in Europe The Audio-Technica products featured in this catalogue are available throughout Great Britain, Western and Eastern Europe, North Africa and the Middle East. They are supplied through the European Division of Audio-Technica Ltd, Leeds, UK. Our products are available through a network of authorised distributors, as well as from dealers. The European Division of Audio-Technica Ltd does not sell directly to European end users. Limited Warranty All Audio-Technica products purchased from Audio-Technica Ltd are guaranteed for TWO years from date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge. Such products should be returned to Audio-Technica Ltd or to the authorised distributor together with proof of purchase. Before return to Audio-Technica Ltd European Division, prior authority must be sought from Audio-Technica Ltd. Contact your local Audio-Technica authorised distributor or dealer before trying to obtain a return authorisation number from Audio-Technica Ltd. Wherever Audio-Technica has an authorised distributor, warranty terms will be exercised by the local Audio-Technica distributor. Please contact your local distributor for the warranty details. Shall the warranty period from the distributor/dealer exceed the Audio-Technica warranty period it will remain the responsibility of the distributor. Shall the standard warranty terms of the distributor/dealer expire before those of Audio-Technica, the Audio-Technica terms will apply and the balance of the warranty period will be the European Division of Audio-Technica Ltd. The Audio-Technica warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use the product in accordance with the instructions. This warranty is void in the event of unauthorised repair or modification, or removal or defacing of the product label and/ or serial number.

52 2004 Product Catalogue Audio-Technica Europe A Division of Audio-Technica Ltd Technica House Royal London Industrial Estate Old Lane, Leeds LS11 8AG England Tel. : + 44 (0) Fax :+ 44 (0) sales@audio-technica-europe.com Form No EUR 2004 Full-line Catalog-ENG Audio-Technica Ltd - Printed in France