Transcription

1 Catalogue

2 Contents Page VHF, UHF, AM/FM & GPS - VHF Low Band (70-100MHz) - VHF High Band ( MHz) - Wireless Microphone - On-Glass Mount - UHF MHz - Multiband Scanning Whip - AM/FM Radio Receive - GPS Multiband Fleet Management - Hand Portable CB Radio - 27MHz CB Radio - 477MHz UHF CB Radio - Antenna Mounting Brackets - Antenna Mounting Springs - 477MHz On-Glass Mount - Antenna Installation Accessories Mobile Phone - Vehicle Barrel Spring Mount - Vehicle Parallel Spring or Bracket Mount - Antenna Mounting Brackets and Springs - Vehicle On-Glass Mount - Fold Down Mount - Magnetic Base Mount - Whips, Bases and Cable Assemblies - Low Profile How to Order Terms and Conditions of Sale Contact Us Updated 28th January 2016

3 VHF, UHF, AM/FM & GPS Contents Page VHF Low Band MHz - BFB1 Ground independent whip 70-85MHz, 2.1 dbi - GRLT Ground independent whip 70-77MHz, 2.1 dbi - M11T & M12T Stainless steel or fibreglass whip, MHz, 2.1 dbi VHF High Band MHz - GRH Quick Fit Series Ground independent whip, MHz, 2.1 dbi - M21T & M22T Stainless steel or fibreglass whip, MHz, 2.1 dbi - VHF-H162 Helical whip, MHz, 2.1 dbi - CT160 Low profi le, MHz, 2.1 dbi, Low Profi le On-Glass Mount - OZ Series On-glass, MHz or UHF MHz, 2.1 dbi or 5.1 dbi UHF - GRN Series Ground independent whip, MHz (specify model), 4 dbi - GID Series Elevated feed, MHz, Specify model, 6.2 dbi - GID Quick Fit Quick-fi t elevated feed, MHz (specify model), 6.6 dbi - GID-F Series Elevated feed, MHz, (specify model), 2.1 dbi - GRUFC Ground independent whip, MHz, 2.1 dbi, fi xed cable model - M & MB Whip Series Stainless steel or fibreglass whip, MHz (specify model), 6.2 dbi - M45T Flexible whip, MHz, 2.1 dbi - M35T & M41T Stainless steel or fibreglass whip, MHz or MHz, 2.1dBi - CT400 Low Profi le, MHz (specify model), 2.1 dbi Multiband Scanning Whip - SM39 & SM39-DAB Scanning whip, MHz or AM/FM, DAB and Digital TV, Receive only AM/FM Radio Receive - ZN3-AMFM-10 Detachable, AM & FM Radio Receive, Receive only, 1.1m - ZN3-AMFM-11 Detachable, AM & FM Radio Receive, Receive only, ZN3-AMFM-12 Detachable, AM & FM Radio Receive, Receive only, ZN3-AMFM-1962 Detachable whip, AM & FM Radio Receive, Receive only, Detachable whip - TC1100 Fibreglass radome collinear, AM & FM Radio Receive, Receive only - SG1100 Fibreglass collinear, AM & FM Radio Receive, Receive only - SGL1100 Fibreglass collinearam & FM Radio Receive, Receive only, Lightweight Design - CR Whip Series Flexible whip, AM & FM Radio Receive, Receive only - CT90 Low Profi le, AM & FM Radio Receive, Receive only, Low Profi le Updated 5th February 2016

4 VHF, UHF, AM/FM & GPS Contents Page GPS Multiband Fleet Management - ZAU-3C Series Low profi le, mobile Phone & GPS, 1dBi & 27dB typical, FME and SMA - ZAU-3S Series Low profi le, Mobile Phone, GPRS & GPS, 26dB & 1dBi typical, SMA only` - ZAW Series Low profile, Mobile Phone, GPS & WiFi - GCFRA & GCT Low profile, Mobile Phone, GPS & WiFi or Mobile Phone & GPS - ZGPS Series Patch antenna, GPS MHz, 4.5 dbi, FME female, SMA Male or SMC Male - CT150 Low profi le, Satellite communications & GPS, Low Profi le, 0 dbd Hand Portable - M99U-70 & M99ERG-70-HD Flexible whip, 70-87MHz or 70-85MHz, 2.1dBi - M99RT Series Helical whip, MHz or 171MHz, 2.1 dbi - MB477 & MBM-477 Flexible whip, 477 MHz,3.1 dbi - M99BNC-148 Flexible whip, MHz, 2.1dBi, BNC Male base, Field tune - M99B-400 & M99U-400 Flexible whip, UHF MHz, 2.1 dbi - M99BNC-900 Flexible whip, MHz, 2.1 dbi - Flexible Whips SMA Female Flexible whip, MHz (specify model), 2.1 dbi - Flexible Whips SMA Male Flexible whip, MHz (specify model), 2.1 dbi - C858 Stubby whip, Telstra, Optus & Vodafone GSM, MHz 2.1 dbi - ZYUE-WX Right-angle whip, Telstra, Optus & Vodafone GSM, MHz 2.1dBi, 90 degree swivel - ZYUE-WX-2400-F Series Right-angle whip, ISM2.4, GHz, 2.1dBi, 90 degree swivel Antenna Installation Accessories How to Order Terms & Conditions of Sale Contact Us Updated 8th September 2016

5 BFB1 Ground Independent VHF Low Band The BFB1 is specifically designed and manufactured for VHF low band with the purpose to be field tuned to required frequency once installed either on your vehicle or structure. Alternative mouting options, adaptors, connectors and other installation accessories are all available separately. BFB1 Stainless Steel tip, white fibreglass radome and grey PVC mount base VHF low band 70-85MHz Bandwidth Any 3% Tuning VSWR Maximum Power Impedance Polarisation Connector Height Weight (order seperate) Field tune the stainless steel tip using SWR meter <1.5:1 across bandwidth 2.1 dbi 100 Watts 50 Ohms Vertical 360 omnidirectional UHF female in side of base (no cable, order separate) 1.83 metres 500grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Bracket Mounting: GM1, GM2, GM4, GM6 Spring Base: 1269 or 1270 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 1st February 2016

6 GRLT Ground Independent VHF Low Band The GRLT is a ground independent, half wave, end fed VHF low band antenna suitable for mounting either on your vehicle or structure. The GRLT needs a good earth at its mounting position, but there is no need for a full ground plane for the GRLT to perform to specifcations. Alternative mounting option, adaptors, connectors and other installation accessories are all available separately. Bandwidth Tuning GRLT Stainless steel whip, delrin and chrome base VHF low band 70-77MHz Any 2MHz Field tune stainless steel whip with SWR meter VSWR <1.5:1 Maximum Power Impedance Polarisation Cable Connector Height Weight (order seperate) 2.1 dbi 100 Watts 50 Ohms Vertical 360 omnidirectional 5.5 metres RG58 stranded (bottom exits from base) UHF male (supplied) 1.7 metres 500grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 1st February 2016

7 M11T and M12T VHF Low Band Whips 5/16-26 TPI Female Thread For the VHF low band range, the M11T and M12T whips are the ideal solution, with the flexibility to be vehicle or fixed position mounted. Mounting accessories, adaptors, connectors and other installation accessories are all available separately. M11T Stainless Steel whip and Chrome ferrule M12T Black heatshrunk fibreglass whip, chrome ferrule Tuning VHF MHz Field trim to required frequency using a SWR meter VSWR <1.5:1 <1.5:1 (nominal) 2.1 dbi 2.1 dbi Maximum Power 50 Watts 50 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Height before tuning 109cm 109cm Weight 79grams 105grams Mount Ferrule (order seperate) 5/16-26 TPI female thread OB-2 / OB-4.7 / MGB-OB / MS Base As high on your vehicle/structure as possible using an appropriate base with bracket or magnetic base Updated 1st February 2016

8 GRH Series Quick Fit VHF Whip Ground Independent The GRH series of Quick-Fit ground independent, half wave, end fed antennas are ideally suited for vehicle or fixed position mounting using the appropriate bracket. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. GRH GRH-TPM GRHFC Stainless steel whip, black delrin base Includes Antenna Top, cable base Antenna Top Antenna with fixed cable Detachable Top Yes Yes No VHF MHz Bandwidth 4MHz 4MHz 4MHz Tuning VSWR Field tune whip using SWR meter <1.5:1 VSWR - a tuning guide is provided 2.1 dbi 2.1 dbi 2.1 dbi Maximum Power 50 Watts 50 Watts 50 Watts Impedance 50 Ohms 50 Ohms 50 Ohms Polarisation Vertical Vertical Vertical 360 Omnidirectional Height 1.17 metres 1.17 metres 1.17 metres Weight 460grams 175grams 400grams Cable RA6.0 cable base None Fixed 4.5 metres Connector (supplied) BNC male None None (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 16mm hole or 10mm hole for GRHFC or appropriate bracket with a 16mm hole or 10mm hole for GRHFC Updated 1st February 2016

9 M21T and M22T VHF High Band Whips 5/16-26 TPI Female Thread For the VHF high band range, the M21T and M22T whips are the ideal solution, with the flexibility to be vehicle or fixed position mounted. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. M21T Stainless Steel whip and chrome ferrule M22T Black heatshrunk fibreglass whip, chrome ferrule Tuning VHF MHz Field trim to required frequency using a SWR meter VSWR <1.5:1 <1.5:1 (nominal) 2.1 dbi 2.1 dbi Maximum Power 50 Watts 50 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Height Before Tuning 550mm 530mm Weight 50grams 65grams Mount Ferrule (order seperate) 5/16-26 TPI female thread OB-2 / OB-4.7 / MGB-OB / MS Base As high on your vehicle/structure as possible using an appropriate base with bracket or magnetic base with a 5/16-26 TPI male thread Updated 1st February 2016

10 VHF-H162 VHF Helical Flexible Whip UHF Male Termination The VHF-H162 is a ground independent, flexible, portable helical antenna specifically designed for the VHF range 162.5MHz. Mounting accessories, coaxial feeder cable, adaptors and other installation accessories are all available separately. Bandwidth VHF-H162 Heatshrunk helical whip and black delrin ferrule VHF 162.5MHz (other frequencies available) Specify 1MHz when ordering VSWR <1.5:1 Tuning Impedance Maximum Power Connector (fitted) Height Weight (order seperate) Factory 2.1 dbi 50 Ohms 25 Watts 360 Omnidirectional UHF male in base of ferrule 360mm 80grams 7994 / RA-4.7 or MGB-UHF As high on your vehicle/structure as possible using an appropriate base with 16mm holed bracket or magnetic base with an UHF Female termination Updated 1st February 2016

11 CT160 Low Profile, Rugged VHF Antenna The low profile and rugged CT160 VHF vehicle mount antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Typical applications suited for the CT160: Trains Buses Forklifts Tractors Forestry Vehicles Military Bandwidth Tuning VSWR (nominal) Maximum Power Impedance Polarisation E Plane Connector Dimensions Weight Mounting Accesories Minimum Ground Plane Police Ambulance Fire Brigade Emergency Services Security Services Mining CT160 Aluminium, delrin and rubber gasket VHF MHz 3MHz Factory tuned to specified frequency (specify on order) <1.5:1 across bandwidth 2.1 dbi 100 Watts 50 Ohms Vertical Near 360 omnidirectional Same as normal 1/4 wave whip N-female mounted to base of antenna 540mm x 60mm x 110mm 1.63Kg 6 x M6 stainless steel bolts/nuts/washers (supplied) 1.2 metres square (metallic surface) Mount as high on your vehicle or structure as possible on a flat metallic surface. H-Plane E-Plane Updated 18th April 2017

12 OZ Series VHF or UHF On-Glass A vehicle on-glass antenna is a popular alternative to other bracket mounted antenna. These OZ series on-glass VHF or UHF models are simple to install, just stick and connect. Please note: The internal adhesive ground plane strips should not be trimmed. Unit should not be adhered to any window with heater dimister elements, imbedded antennas, metallic flakes or UV tinting. Adaptors, connectors and other installation accessories are all available separately. OZV-1 OZU-1 OZU-3 Black stainless steel whip, thermoplastic base OZV-1 VHF MHz UHF MHz Bandwidth Any 4MHz Any 15MHz Any 20MHz Tuning VSWR Field tune capacitor, using SWR meter <2:1 across bandwith 2.1 dbi 5.1 dbd 2.1 dbi Maximum Power 30 Watts 50 Watts 30 Watts Impedance 50 Ohms 50 Ohms 50 Ohms Polarisation Vertical Vertical Vertical 360 omnidirectional OZU-1 Cable Connector (OZ box) Connector (device) Whip type 4.5 metres RG58 stranded Mini UHF male fitted to suit internal junction box Select and order as per requirements 1/2 λ (Wave) 5/8 λ (Wave) 1/4 λ (Wave) Height 860mm 560mm 230mm Weight 300grams 300grams 300grams Installation Kit Contents 3mm allen key, alcohol glass wip, installation/tuning guide Mount on the top of your windscreen or rear window. Ensure heating elements, imbedded antennas, tint or metallic flakes are not present. OZU-3 Updated 1st February 2016

13 GRN Series Highly Flexible UHF Ground Independent Antennas The GRN series of half wave UHF highly flexible mobile antennas are virtually unbreakable. Perfect for rugged off-road driving, forklifts and tractors. The GRNFC denotes a fixed cable exiting the bottom of the mount ferrule. The standard GRN series comes with a detachable 4.7 metres RG58A/U base. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. GRN Series GRNFC Series (select model with frequency band required) Black flexible radome, black delrin mount/detachable ferrule and cable assembly GRN410 or GRNFC ( MHz) GRN430 or GRNFC ( MHz) GRN460 or GRNFC ( MHz) GRN480 or GRNFC ( MHz) GRN510 or GRNFC ( MHz) Tuning Factory Factory 4 dbi 4 dbi GRN460 Impedance 50 Ohms 50 Ohms Maximum Power 50 Watts 50 Watts Polarisation Vertical Vertical Weight 360grams 320grams Height GRN410 or GRNFC mm (White cap) GRN430 or GRNFC mm (Brown cap) GRN460 or GRNFC mm (Red cap) GRN480 or GRNFC mm (Blue cap) GRN510 or GRNFC mm (Yellow cap) Connector (supplied) UHF male UHF male Cable Detachable 4.7 metres MIL-SPEC RG58A/U 4.7 metres MIL-SPEC RG58A/U fixed (bottom exit from base) (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 Mount as high on your vehicle or structure as possible using an appropriate 16mm or 10mm bracket or hole. GRN-TP series on following page... GRNFC460 Updated 1st February 2016

14 GID Series UHF Ground Independent Bracket Mount The GID series of elevated feed, ground independent antennas offer effective performance with good gain. Their modest size and light weight design make these antennas an excellent choice for vehicle or fixed position mounting using an appropriate bracket. Mounting accessories, adaptors, and other installation accessories are all available separately MHz MHz MHz MHz MHz GID-M Series Black steel whip, delrin and chrome base GID-M410 (Black Tip) GID-M430 (Brown Tip) GID-M460 (Red Tip) GID-M480 (Blue Tip) GID-M510 (Yellow Tip) GID-MB Series Black fibreglass whip, delrin and chrome base GID-MB410 (White Band) GID-MB430 (Brown Band) GID-MB460 (Red Band) GID-MB480 (Blue Band) GID-MB510 (Yellow Band) VSWR <1.5:1 VSWR Full band Tuning Factory Factory 6.2 dbi 6.2 dbi Maximum Power 50 Watts 50 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable 4.5 metres RG58 low loss (bottom exits from base) Connector (supplied) UHF male (PL259) UHF male (PL259) Height GID-M mm GID-M mm GID-M mm GID-M mm GID-M mm GID-MB mm GID-MB mm GID-MB mm GID-MB mm GID-MB mm Weight 590grams 590grams (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 10mm hole or appropriate bracket with a 10mm hole Updated 1st February 2016

15 GID Quick Fit Ground Independent UHF Quick Fit Phased Coil Whip The GID Quick Fit series of elevated feed, ground independent antennas are specifically designed and manufactured for the UHF frequency band. The unique design makes installation so simple with the additional benefit of being easily removed if you are concerned about damage, vandalism or theft. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. (select and order) Tuning VSWR Maximum Power Impedance Polarisation Connector Weight Height (order seperate) GID Quick Fit Series Black stainless steel whip and chrome and delrin base GID-M410-QF ( MHz) GID-M430-QF ( MHz) GID-M460-QF ( MHz) GID-M480-QF ( MHz) GID-M510-QF ( MHz) Factory <1.5:1 VSWR across full band 6.6 dbi 50 Watts 50 Ohms Vertical UHF male in base 380grams GID-M410-QF - 950mm (White cap) GID-M430-QF - 910mm (Brown cap) GID-M460-QF - 860mm (Red cap) GID-M480-QF - 820mm (Blue cap) GID-M510-QF - 800mm (Yellow cap) 7994 / RA-4.7 / MGBIM-UHF or MGB-UHF Mount as high on your vehicle or structure as possible using an appropriate base and 16mm bracket or magnetic base Updated 1st January 2016

16 GID-480-F UHF Elevated Feed Monopole Ground Independent The GID-480-F elevated feed, ground independent UHF mobile antenna has a unique design which makes installation simple for both marine or industrial locations. Please note: Other model variances can be manufactured, please contact ZCG for more information. Mounting accessories, adaptors, bird-proofing and other installation accessories are all available separately. VSWR Tuning Maximum Power Impedance Polarisation Connector (fitted) Cable Weight GID-480-F Stainless steel whip, delrin and chrome feed base and cable assembly UHF MHz <1.5:1 VSWR Full band Factory 2.1 dbi 100 Watts 50 Ohms Vertical 360 Omnidirectional UHF male (PL259) 4.7 metres MIL-SPEC RG58A/U (bottom exits from base) 500grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 Using the threaded nut and flat washer suitable for 16mm hole Mount as high on your vehicle or structure as possible using an appropriate 10mm hole or bracket with a 10mm hole Updated 1st January 2016

17 GRUFC UHF Ground Independent Half Wave Whip The GRUFC ground independent UHF half wave whip is an end fed design, ideally suited for mounting to a bull bar, guard, boot or a truck mirror or for fixed position mounting using the appropriate bracket. Mounting accessories, adaptors and other installation accessories are all available separately. Bandwidth Tuning VSWR Maximum power Impedance Polarisation Cable Connector and Adaptor Height at 420MHz Weight (order seperate) GRUFC Stainless steel whip, black delrin base and fixed cable assembly UHF MHz 15MHz (specify when ordering) Factory <1.5:1 across specified bandwidth 2.1 dbi 50 Watts 50 Ohms Vertical 360 omnidirectional, ± 0.5 dbd 4.5 metres RG58 low loss (bottom exit from base) FME female fitted, FME male- UHF male adaptor (supplied) 1.1 metres (higher frequencies height reduces slightly) 360grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle or structure as possible using a minimum 10mm hole or appropriate bracket with a 10mm hole Updated 2nd February 2016

18 M and MB Series UHF MHz Stainless Steel or Fibreglass Whips These range of UHF whips offer both excellent performance with medium nominal gain, with the flexibility to be used in either vehicle or fixed position locations. Mounting accessories, adaptors, cable assemblies and other installation accessories are all available separately. M Series Whips Powder-coated black ferrule and whip M410 ( MHz) M430 ( MHz) M460 ( MHz) M480 ( MHz) M510 ( MHz) MB Series Whips Heatshrunk fibreglass, chrome ferrule MB410 ( MHz) MB430 ( MHz) MB460 ( MHz) MB480 ( MHz) MB510 ( MHz) VSWR <1.5:1 <1.5:1 Tuning Factory Factory (nominal) 6.2 dbi 6.2 dbi Maximum Power 50 Watts 50 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Height (approx.) M mm (Black tip) M mm (Brown tip) M mm (Red tip) M mm (Blue tip) M mm (Black tip) MB mm (White band) MB mm (Brown band) MB mm (Red band) MB mm (Blue band) MB mm (Yellow band) Mount Ferrule 5/16-26 TPI female thread Weight 78grams 80grams (order seperate) OB-2 / OB-4.7 / MGB-OB or MS base Mount as high on your vehicle or structure as possible using the appropriate base and 16mm holes bracket, magnetic base or spring base Updated13th July 2017

19 M45T UHF MHz Flexible Whip The M45T is a highly flexible UHF whip ideally suited for vehicle or fixed position mounting situations where rough treatment and hard knocks can be common-place. Mounting accessories, cable assemblies and other installation accessories are all available separately. Tuning M45T Heatshrunk stainless steel wire, chrome ferrule UHF MHz Field trim to required frequency using a SWR meter VSWR <1.5:1 (nominal) Maximum Power Impedance Polarisation Height before tuning Weight Mount Ferrule (order seperate) 2.1 dbi 50 Watts 50 Ohms Vertical 170mm 32grams 5/16-26 TPI female thread OB-2 / OB-4.7 / MGB-OB or MS Base Mount as high on your vehicle or structure using an ap- propriate base with 16mm bracket, magnetic base or spring base Updated 2nd February 2016

20 M35T and M41T UHF MHz Stainless Steel Whips For the UHF MHz range, the M35T and M41T whips are the ideal solution, with the flexibility to be vehicle mounted or in a fixed position location. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. M35T M41T Tapered stainless Steel whip and chrome ferrule UHF MHz UHF MHz Tuning (nominal) Field trim to required frequency using a SWR meter 2.1 dbi 2.1 dbi Maximum Power 50 Watts 50 Watts Polarisation Vertical Vertical Height Before Tuning 250mm 206mm Weight 45grams 43grams Mount Ferrule 5/16-26 TPI thread M6-1.0 thread (order seperate) OB-2 or XB Base / OB-4.7 or XB-4.7 / MGB-OB or MGB-XB/ MS Base Mount as high on your vehicle or structure using an appropriate base with 16mm bracket, magnetic base or spring base Updated 2nd February 2016

21 CT400 UHF MHz Low Profile Rugged Antenna The low profile and rugged CT400 UHF antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Typical applications suited for the CT400: Trains Buses Forklifts Tractors Forestry Vehicles Military Police Ambulance Fire Brigade Emergency Services Security Services Mining Frequency Fixed s (specify one) VSWR Tuning (nominal) Maximum Power Impedance Polarisation E Plane Connector (fitted) Dimensions Weight Mounting CT400 series Aluminium, delrin and rubber gasket UHF MHz MHz MHz MHz MHz MHz <1.5:1 across frequency range selected Factory 2.1 dbi 100 Watts 50 Ohms Vertical Near 360 omnidirectional Same as normal 1/4 wave whip N-type female at base of antenna 210mm long x 60mm wide x 60mm high 530grams 4 x M6 stainless steel bolts/nuts/washers (supplied) H-Plane E-Plane Minimum Ground Plane 1.2 metres square Updated 2nd February 2016

22 CT700 UHF to MHz Low Profile Rugged Antenna The low profile and rugged CT700 UHF antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Typical applications suited for the CT700: Trains Buses Forklifts Tractors Forestry Vehicles Military Police Ambulance Fire Brigade Emergency Services Security Services Mining Frequency VSWR Tuning (nominal) Maximum Power Impedance Polarisation E Plane Connector (fitted) Dimensions Weight Mounting CT700 series Aluminium, delrin and rubber gasket UHF to MHz <1.5:1 across frequency range selected Factory 2.1 dbi 100 Watts 50 Ohms Vertical Near 360 omnidirectional Same as normal 1/4 wave whip N-type female at base of antenna 170mm long x 32mm wide x 32mm high 170grams 2 x M6 stainless steel bolts/nuts/washers (supplied) H-Plane E-Plane Minimum Ground Plane 1 metres square Updated 16th August 2016

23 If you require a mobile phone or wireless data network antenna which is small, inconspicuous and virtually indestructable, then the CT800 for Telstra 3G or the CT900 for Telstra, Optus & Vodafone GSM antenna will be your solution. These low profile antenna are an ideal solution where there is vulnerablity to vandalism, theft or damage. Applications suited for these antennas are: CT800 and CT900 Telstra 3G or Telstra, Optus & Vodafone GSM Ground Dependent Mobile Phone/Wireless Data Improvement Trains Buses Forklifts Tractors Forestry Vehicles Logging Trucks Police Ambulance Fire Brigade Military Vehicles Security Services Mining Vehicles CT800 CT900 Aluminium, delrin, rubber gasket & tri-metal plated terminations Bandwidth Telstra 3G MHz Full band Telstra, Optus & Vodafone GSM MHz Full band VSWR <1.6:1 full band <1.6:1 full band Tuning Factory Factory (nominal) 2.1 dbi 2.1 dbi Maximum Power 5 Watts 5 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical E Plane Connector (fitted) Dimensions Near 360 omnidirectional Same as a normal 1/4 λ (wave) whip N-type female mounted at base of antenna 150mm long x 32mm wide x 32mm high Weight 170grams 170grams Mounting 2 x M6 bolts (not supplied) As high on your vehicle/ structure as possible, on a minimum 1.0 metre x 1.0 metre metal ground plane. Updated 28th January 2016

24 SM39 Series VHF & UHF or AM/FM, DAB+ Radio and Digital TV Receive Whip The SM39 is an effective receive whip designed for receive purposes for ambulance, police, airband and UHF commercial services. The SM39-DAB is an AM/FM, DAB+ Radio and digital TV receive whip. Mounting accessories, bird-proofing and other installation accessories are all available separately. Please note that ZCG Scalar provide this antenna for legal use only and not for unauthorised listening. SM39 SM39-DAB Black heatshrunk fibreglass and chrome ferrule MHz AM/FM, DAB+ Radio & Digital TV Receive only Receive only Tuning Factory Factory Maximum Power Receive only Receive only Polarisation Vertical Vertical 360 Omnidirectional Height 850mm 850mm Weight 155grams 155grams Mount Ferrule Mounting: SM39 (order seperate) Mounting: SM39-DAB 5/16-26 TPI female thread OB-2 / OB-4.7 / MGB-OB or MS Base OB (supplied) Mount as high on your vehicle or structure as possible using an appropriate base and 16mm holed bracket, magnetic base or spring base. Updated 2nd February 2016

25 ZN N UHF Lightweight Flexible Whip Antenna MHz The ZN N is a UHF Lightweight Flexible Whip Antenna ideally suited for fixed position mounting. The ZN N is a 400MHz flexible half-wave whip antenna ideally suited for situations where a flexible whip is required. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. ZN N Black PVC flexible radome, aluminium mount tube and cable assembly UHF CB radio MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight (order separate) Factory 2.1 dbi 100 Watts 50 Ohms Vertical 360 omnidirectional 3 metres RG58 cable tail N-Type Female fitted to cable 450mm 300grams GM1, GM2,GM4,GM6 order separately Updated 17 August 2017

26 ZN1-400-N UHF Lightweight Flexible Whip Antenna MHz The ZN N is a MHz flexible half-wave whip antenna ideally suited for situations where a flexible whip is required with an N-Type Female connector. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. ZN1-400-N Black PVC flexible radome, aluminium mount tube and cable assembly UHF CB radio MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight (order separate) Factory 2.1 dbi 100 Watts 50 Ohms Vertical 360 omnidirectional 3 metres RG58 N-Type Female fitted to cable 735mm 400grams EB1 or UB3SS order separately Updated 17 August 2017

27 ZN3-AMFM-10 Detachable AM/FM Radio Spring Base Antenna Designed for vehicle mounting on a small 4WD, ute or car, the ZN3- AMFM-10 detachable medium duty vehicle mount antenna is your ideal solution to boost your AM or FM reception. Alternative mounting option, adaptors, connectors and other installation accessories are all available separately. ZN3-AMFM-10B ZN3-AMFM-10W Colour Black radome White radome Coloured fibreglass radome, detachable aluminium ferrule, barrel spring and coaxial cable assembly AM radio kHz and FM radio MHz Tuning Factory Factory Receive only Receive only Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector 360 Omnidirectional 4.5 metres RG58 low loss (bottom exits spring base) Easy fit solderless car radio connector (supplied) Height 1.1 metres 1.1 metres Weight 925grams 925grams (order seperate) Installation Kit Contents Replacement Parts Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Allen key, solderless connector, PVC cap, 6 cable ties ZN3-AMFM-10W-TPM replacement white antenna ZN3-AMFM-10B-TPM replacement black antenna Alternative models Height Weight ZN3-AMFM-11 Series 1.2 metres 1.42Kg ZN3-AMFM-12 Series 2.1 metres 1.6Kg Updated 28th January 2016

28 ZN3-AMFM-11 Detachable AM/FM Radio Spring Base Antenna Designed for vehicle mounting on a 4WD, ute or large car the ZN3- AMFM-11 detachable vehicle mount antenna is your ideal solution to boost your AM or FM reception. Alternative mounting option, adaptors, connectors and other installation accessories are all available separately. ZN3-AMFM-11B ZN3-AMFM-11W Colour Black radome White radome Coloured radome, aluminium ferrule, stainless steel barrel spring base and coaxial cable assembly AM radio kHz and FM radio MHz Tuning Factory Factory Receive only Receive only Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector Height 360 omnidirectional 4.5 metres RG58 low loss (bottom exits spring base) Easy fit solderless car radio connector (supplied) 1.2 metres 1.2 metres Weight 1.42Kg 1.42Kg (order seperate) Installation Kit Contents Replacement Parts Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Allen key, solderless connector, PVC cap, 8 cable ties ZN3-AMFM-11W-TPM replacement white antenna ZN3-AMFM-11B-TPM replacement black antenna Alternative models Height Weight ZN3-AMFM-10B or W 1.1 metres 925grams ZN3-AMFM-12B or W 2.1 metres 1.6Kg Updated 28th January 2016

29 ZN3-AMFM-12 Detachable AM/FM Radio Spring Base Antenna Designed for vehicle mounting on a large 4WD, ute or truck the ZN3-AMFM-12 detachable vehicle mount antenna is your ideal solution to boost your AM or FM reception. Alternative mounting option, adaptors, connectors and other installation accessories are all available separately. ZN3-AMFM-12B ZN3-AMFM-12W Colour Black radome White radome Coloured fibreglass radome, detachable aluminium ferrule, barrel spring base and coaxial cable assembly AM radio kHz and FM radio MHz Tuning Factory Factory Receive only Receive only Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector 360 omnidirectional 4.5 metres RG58 low loss (bottom exits spring base) Easy fit solderless car radio connector (supplied) Height 2.1 metres 2.1 metres Weight 1.6Kg 1.6Kg (order seperate) Installation Kit Contents Replacement Parts Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Allen key, solderless connector, PVC cap, 8 cable ties ZN3-AMFM-12W-TPM replacement white antenna ZN3-AMFM-12B-TPM replacement black antenna Alternative models Height Weight ZN3-AMFM-10 Series 1.1 metres 925grams ZN3-AMFM-11 Series 1.2 metres 1.42Kg Updated 28th January 2016

30 ZN3-AMFM-1962 Detachable AM/FM Radio Receive Spring Base Antenna To boost AM and FM radio reception whilst travelling, the ZN3- AMFM-1962 series offers superb performance with a light weight design, ideal for vehicle or fixed location mounting. Alternative mounting option, adaptors, connectors and other installation accessories are all available separately. ZN3-AMFM-1962 Fibreglass whip, detachable aluminium mount, barrel spring and cable assembly ZN3-AMFM-1962-HD Heavy duty fibreglass whip, detachable aluminium mount, barrel spring and cable assembly Frequency AM/FM radio receive Tuning Factory Factory Receive only Receive only Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector 4.5 metres RG58 low loss (bottom exits spring base) Solderless car radio connector (supplied) 360 omnidirectional Height 1.83 metres 2.1 metres Weight 500grams 600grams Reaplament Whips CR66-TPM CR66-HD-TPM (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle or structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole ZN3-AMFM-1962-HD Updated 28th January 2016

31 TC1100 Series AM/FM Radio Receive Spring Base Antenna The TC1100 vehicle antenna has been optimised to pull in even the weakest AM and FM radio signals. The TC1100 is identical in appearance to TC1600-A (Telstra 3G), TC1600-D (Telstra, Optus & Vodafone GSM) and TCMA675 (UHF CB radio) Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Tuning Impedance Polarisation Cable Connector Height Weight (order seperate) Replacment Top TC1100 White fibreglass radome, chrome ferrule, parallel spring base and coaxial cable assembly AM radio kHz and FM radio MHz Factory Receive only 50 Ohms Vertical 360 omnidirectional 5 metres RG58 stranded (side exit from ferrule) Easy fit solderless car radio connector (supplied) 2.2 metres 1.5Kg Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole TC1100-TPM Updated 28th January 2016

32 SG1100 Series AM/FM Radio Receive Spring Base Antenna Perfect for vehicle mounting the SG1100 series will significantly improve your AM and FM radio reception when travelling. The SG1100 series are identical in appearance to the SGDB series and SG477 series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. SG1100-B SG1100-W Colour Black White Coloured radome, aluminium ferrule and spring base AM radio kHz and FM radio MHz Tuning Factory Factory Recieve only Receive only Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector 360 omnidirectional 5 metres RG58 stranded (side exit) Easy fit solderless car radio connector (supplied) Height 900mm 900mm Weight 900grams 900grams Mounting (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Replacement Top SG1100-B-TPM SG1100-W-TPM Updated 28th January 2016

33 *NEW* SG1100-BLKR Series AM/FM Radio Receive Spring Base Antenna Perfect for vehicle mounting the SG1100 series will significantly improve your AM and FM radio reception when travelling. The SG1100-BLKR series are identical in appearance to the SGDB- BLKR series and SG477-BLKR series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Colour Tuning Impedance Polarisation Cable Connector Height Weight Mounting (order seperate) SG1100-BLKR Series Black spring and radome Coloured radome, aluminium ferrule and spring base AM radio kHz and FM radio MHz Factory Recieve only 50 Ohms Vertical 360 omnidirectional 5 metres RG58 stranded (side exit) Easy fit solderless car radio connector (supplied) 900mm 900grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Replacement Top SG1100-B-TPM has chrome spring Updated 1st August 2017

34 SGL1100 Series Lightweight AM/FM Radio Receive Spring Base Antenna Perfect for vehicle mounting the SGL1100 lightweight AM/FM antenna will significantly improve your AM and FM radio reception when travelling. The SGL1100 series is identical in appearance to the SGLDB series and SGL477 series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. SGL1100-B SGL1100-W Colour Black White Coloured radome, aluminium ferrule and spring base AM radio kHz and FM radio MHz VSWR <1.5:1 <1.5:1 Tuning Factory Factory Receive only Receive only Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector 360 omnidirectional 5 metres RG58 stranded (bottom exit) Easy fit solderless car radio connector (supplied) Height 750mm 750mm Weight 650grams 650grams (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 28th January 2016

35 *NEW* SGL1100-BLKR Series Lightweight AM/FM Radio Receive Spring Base Antenna Perfect for vehicle mounting the SGL1100-BLKR lightweight AM/FM antenna will significantly improve your AM and FM radio reception when travelling. The SGL1100-BLKR series is identical in appearance to the SGLDB series and SGL477-BLKR series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. SGL1100-BLKR Series Black Coloured fiberglass radome, aluminium ferrule, barrel spring base and coaxial cable assembly AM radio kHz and FM radio VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight (order seperate) Factory Receive only 20 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 lstranded (bottom exit) Easy fit solderless car radio connector 750mm 650grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 (recommneded) As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with Updated 1st August 2017

36 CR Series AM/FM Radio Receive Whips To boost AM and FM radio reception whilst travelling, these fibreglass whips offer superb performance with a light weight design, ideal for mounting in various positions on a vehicle, truck mirror or fixed location. Alternative mounting option, adaptors, connectors and other installation accessories are all available separately. CR36 CR66 CR66-HD Black heatshrunk fibreglass whip, chrome ferrule Heavy duty whip and ferrule Frequency AM radio kHz and FM radio MHz Tuning Factory Factory Factory Cable Connector 4.0 metres RG58A/U (bottom exits from OB Base) Easy fit solderless male car radio connector fitted Receive only Receive only Receive only Impedance 50 Ohms 50 Ohms 50 Ohms Polarisation Vertical Vertical Vertical 360 omnidirectional Height 1.0 metre 1.5 metres 1.83 metres Weight 310grams 350grams 500grams CRBL CRBL CRBL Replacement Whips CR36-TPM CR66-TPM CR66-HD-TPM (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle or structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 28th March 2017

37 CT90 FM Radio Receive Low Profile, Rugged & Covert The low profile and rugged CT90 FM radio receive vehicle mount antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Typical applications suited for the CT90: Trains Buses Forklifts Tractors Forestry Vehicles Logging Trucks Police Ambulance Fire Brigade Emergency Services Security Services Mining Bandwidth Tuning VSWR (nominal) Impedance Polarisation E Plane Connector Dimensions Weight Mounting Minimum Ground Plane CT90 Aluminium, delrin and rubber gasket FM Radio MHz Full band Factory <1.5:1 at 98MHz <2:1 across full band Receive only 50 Ohms Vertical Near 360 omnidirectional Same as normal 1/4 wave whip N-female mounted to base of antenna 865mm x 80mm x 100mm 1.6Kg 6 x M6 stainless steel bolts/nuts/washers (supplied) 1.2 metres square H-Plane E-Plane Updated 28th January 2016

38 ZAU-3C Series GPS and Telstra 3G Low Profile Antenna For both Automatic Vehicle Location (AVL) systems and mobile phone reception improvement, the ZAU series deliver a highly sensitive multiband solution for fleet management. Alternative mounting, adaptors, connectors and other installation accessories are all available separately. GPS Mobile Phone Black plastic radome, chrome mounting base Bandwidth MHz 10MHz Telstra 3G MHz Full band 27 db typical 1.0 dbi Polarisation Right-hand circular N/A Noise Figure 1.8 maximum N/A Attenuation 20 db FO ± 50MHz N/A VSWR <1.5:1 across bandwidth <1.5:1 full band Impedance 50 Ohms 50 Ohms Power Supply Connector (fitted) Power consumption Volts DC/ 13 ma SMA male Power handling capacity 10 Watts FME female Dimensions 64.5mm diameter x 14mm high Operating Temperature -40 C to +85 C -40 C to +85 C Storage Temperature -45 C to +100 C -45 C to +100 C (order Seperate) Model Order Codes ZAU-3C2M-GC ZAU-3C3M-GC ZAU-3C5M-GC Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Details 2 x 2 metres RG174 (bottom exit) 2 x 3 metres RG174 (bottom exit) 2 x 5 metres RG174 (bottom exit) Updated 28th January 2016

39 ZAU-3S Series GPS, GPRS and Telstra 4G & 3G Low Profile Antenna For Automatic Vehicle Location (AVL) systems, GPRS (General packet radio service) packet orientation data service and mobile phone reception improvement, the ZAU-3S series deliver a highly sensitive multiband solution for fleet management. Alternative mounting, adaptors, connectors and other installation accessories are all available separately. GPS/GPRS Mobile Phone Black plastic radome, chrome mounting base Bandwidth MHz N/A Telstra 4G & 3G MHz & MHz Full band 26 db typical 1.0 dbi Polarisation Right-hand circular N/A Noise Figure 1.2 maximum N/A Attenuation 20 db FO ± 50MHz N/A VSWR <1.5:1 across bandwidth <1.5:1 full band Impedance 50 Ohms 50 Ohms Power Supply Connector (fitted) Power consumption Volts DC/ 13 ma FME female Power handling 10W maximum SMA Male (Gold Plated) Dimensions 64.5mm diameter x 13.6mm high Operating Temperature -40 C to +85 C -40 C to +85 C Storage Temperature -45 C to +100 C -45 C to +100 C Mounting Model Order Codes ZAU-3S5M-GC ZAU-3S7M-GC Onto any flat magnetic metal surface using magnetic base As high on your vehicle/structure as possible using any magnetic metal surface. Details 2 x 5 metres RG174 (bottom exit) 2 x 7 metres RG174 (bottom exit) Updated 28th January 2016

40 ZAW-3C5M-GC GPS, Mobile Phone and WiFi Low Profile Antenna The ZAW-3C5M-GC is designed and manufactred with both GPS and AMPS antennas inside one low profile radome for AVL or fleet management applications. The ZAW-3C5M-GC incorporates an internal state-of-the-art low noise amplifier for the GPS patch antenna. Alternative mounting, adaptors, connectors and other installation accessories are all available separately. GPS Mobile Phone WiFi Black plastic radome, chrome mounting base and rubber gasket MHz Telstra, Optus & Vodafone 4G, 3G & GSM & MHz (excludes Optus & Vodafone 3G) GHz Bandwidth 2MHz minimum Full band Full band 27 db typical 2.5 dbi 0 dbi Polarisation Right-hand circular (RHCP) Linear Linear Noise Figure 1.8 maximum N/A N/A Attenuation 20 db FO ± 50MHz N/A N/A VSWR <2:1 across bandwidth <2:1 across bandwidth <2:1 across bandwidth Impedance 50 Ohm 50 Ohm 50 Ohm Power Supply Power consumption Volts DC/ 12 ma Power Handling Capacity 10 Watts Power handling capacity 10 Watts Connector (fitted) SMA male SMA male SMA male Dimensions 64.5mm diameter x 17mm high Operating Temperature -40 C to +55 C -40 C to +55 C -40 C to +55 C Storage Temperature -45 C to +55 C -45 C to +55 C -45 C to +55 C (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 Mount as high on your vehicle or structure as possible using an appropriate 13mm hole or bracket with a 13mm hole Updated 2nd February 2015

41 GCFRA and GCT Mobile Phone/Wireless Data/WiFi and GPS Page 1 of 2 The GCT low profile all-in-one antenna will improve reception for all mobile phone/wireless data networks and GPS. The GCFRA low profile all-in-one antenna will improve mobile phone/ wireless data, GPS and WiFi reception. Adaptors and other installation accessories are all available separately. GCFRA GCT Cream ABS polycarbonate radome Cellular coverage GPS coverage MHz Telstra, Optus & Vodafone 4G, 3G & GSM MHz & MHz MHz GCT Mobile Phone & GPS WiFi coverage Yes No Tuning Factory Factory Impedance 50 Ohms 50 Ohms 360 omnidirectional Weight 280grams 280grams Height 39mm 39mm Cable 3 x 5 metre RG174/U 1 x 5 metre RG174/U 1 x 5 metre RG58/AU GCFRA Mobile Phone, GPS & WiFi Connector (fitted) 3 x SMA male 2 x SMA male Mounting Any bracket or flat surface with 20mm hole using cream ABS nut and attached rubber gasket supplied As high on your vehicle/structure as possible using a minimum 20mm hole or bracket with 20mm hole. Updated 28th January 2016

42 GCFRA and GCT Mobile Phone/Wireless Data/WiFi and GPS Page 2 of 2 Cellular Antenna GCFRA and GCT GPS Active Patch Antenna Frequency Coverage Tuning and VSWR Impedance Pattern Maximum Power Frequency Coverage Tuning and VSWR Bandwidth Axial Ratio Impedance Peak Polarisation Telstra, Optus & Vodafone 4G, 3G and GSM networks MHz and MHz Factory tuned to <2:1 across entire frequency 50 Ohms 360 omnidirectional 25 Watts GCFRA and GCT MHz ± 3MHz Factory tuned to 1.5:1 minimum 20MHz minimum at -10dB 3 db typical 50 Ohms 4 dbic minimum (7cm x 7cm ground plane) Right-hand Circular Amp. Module Amp. Noise Figure Output VSWR DC Voltage DC Current Type A. Type B. 27 db Typical 1.4 db typical 1.4 db typical 2.0 maximum 3.0 V V 2.7 V V 22 ± 5 ma 8.5 ± 4.5 ma WiFi Antenna GCFRA (GCT not Supported) Frequency Coverage Tuning and VSWR Impedance Pattern Maximum Power Ghz Factory tuned to <2:1 across specified frequency 50 Ohms 360 omnidirectional 25 Watts Updated 18th January 2016

43 ZGPS Series GPS with Low Noise Amplifier Page 1 of 2 The ZGPS series of patch antennas are compact and sensitive with a low noise amplifier to receive very weak signals. Key Features Low profile and compact High sensitivity, high gain Low noise figure Water resistant Magnetic/Adhesive mounting Excellent temperature stability Typical Applications Vehicle GPS Bluetooth receiver Vehicle tracking navigation system AVL/ Fleet management system External antenna for handheld GPS External antenna for PDA navigator ZGPS-FA & ZGPS-FM ZGPS-F ZGPS-SA ZGPS-SC Black polycarbonate cover, rubber gasket Connector Options (fitted) Fakra Blue type D SMA male type A SMC male type C MHz VSWR 2.0 maximum At 90 : 30 ± 4.5 dbi - Cable Loss (-1.2 db/m) ZGPS-SAA & ZGPS-SAM Impedance (output) 50 Ohms 50 Ohms 50 Ohms Dimensions Weight Cable Pulling Strength 46mm long x 38mm wide x 12.5mm high 50grams (excluding cable and connector) 5 metres RG174A /U (alternative lengths available) 6Kg for 5 seconds with strain relief on connector Order Code Magnetic ZGPS-FM ZGPS-SAM ZGPS-SCM Order Code Adhesive ZGPS-FA ZGPS-SAA ZGPS-SCA Mount as high on your vehicle or structure as possible, either onto a metallic magnetic surface (magnetic base) or any flat horizontal surface (adhesive base). ZGPS-SCA & ZGPS-SCM For more details please see following sheet Updated 2nd February 2016

44 ZGPS Series GPS with Low Noise Amplifier Page 2 of 2 Sample Radiation Patterns Polarisation Absolute at Zenith Antenna Element Right-hand circular 3 dbic typical 90 : 2.0 dbi minimum 20 : -5.0 dbi minimum Mounted on a 60mm x 60mm square ground plane Axial Ratio 90 : 3.0 dbi minimum Mounted on a 60mm x 60mm square ground plane Low Noise Amplifier Bandwidth Noise Figures Supply Voltage Current Consumption Output Impedance Output VSWR 28 db ± 4.5 db 10MHz S11-10dB 1.5 db typical Volts DC Volts : 10.6 ma ± 1 ma 5 Volts : 11.5 ma ± 1 ma 50 Ohms 2.0 maximum Environmental Conditions Operating Temperature Storage Temperature Relative Humidity -40 C to +85 C -40 C to +85 C 95% non-condensing Updated 2nd February 2016

45 CT150 Satellite Communications & GPS Enclosed Low Profile Antenna The low profile and rugged CT150 satellite communications and GPS antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Typical applications suited for the CT150: Trains Buses Forklifts Tractors Forestry Vehicles Military Police Ambulance Fire Brigade Emergency Services Security Services Mining Tuning Connector (fitted) Dimensions CT150 White (or black) ABS Radome, aluminium mount plate and 2 x cable assemblies Factory 1 x SMA male, 4.5 metres RG58 low loss (Satellite) 1 x SMA male, 5 metres RG174/U (GPS) 610mm long x 125mm width x 85mm 6 x M6 Bolts (supplied) Satellite Communications Bandwidth VSWR Impedance Polarisation Operating Voltage Polarisation Tx MHz Full band 0 dbd <2:1 across full band 50 Ohms Vertical GPS MHz Volts DC 32 dbi Right-hand Circular Rx MHz Updated 2nd February 2016

46 M99 Series VHF 70-87MHz or 70-85MHz Flexible Helical Wound Whip The M99 series are helically wound whips specifically for the VHF frequency range. The helical design is most useful in circumstances where reduced height and flexibile construction is essential. Adaptors, coaxial feeder cable, connectors and other installation accessories are all available separately. M99U-70 M99ERG70-HD Flexible helical whip and chrome connector Bandwidth Tuning Return Loss, VSWR 70-87MHz 70-85MHz Any 3% within frequency range Field trim to tune using SWR meter Nominal 1.5:1 VSWR (nominal) 2.1 dbi 2.1 dbi Polarisation Vertical Vertical Maximum Power 25 Watts 25 Watts Impedance 50 Ohms 50 Ohms (each plane) Connector UHF female in base 360 Omnidirectional 5/16-26TPI female thread Height 450mm 308mm Weight 75 grams 70 grams Mounting - M99U-70 Mounting - M99ERG70-HD UHF female fits to any UHF male terminated device OB-2 / OB-4.7 / MGB-OB or MS Base Updated 2nd February 2016

47 M99RT Series VHF MHz Flexible Helical Wound Whip The M99RT series are helically wound whips specifically for the VHF MHz frequency range. This helical design is most useful in circumstances where reduced height and flexible construction is essential. Alternative mounting options, coaxial feeder cable, water proofing and other installation accessories are all available separately. M99RT148 M99RT171 Black heatshrunk helical whip and chrome ferrule VHF MHz VHF 171MHz Bandwidth Any 5% VSWR N/A <1.5:1 across bandwidth Tuning Field tune using SWR meter No tune required 2.1 dbi 2.1 dbi Impedance (nominal) 50 Ohms 50 Ohms Maximum Power 25 Watts 25 Watts Polarisation Vertical Vertical 360 Omnidirectional Height 315mm 205mm Weight 66grams 40grams (order seperate) OB-2 / OB-4.7 / MGB-OB or MS Base Updated 2nd February 2016

48 MB477 & MBM-477 Series UHF 477MHz Flexible Helical Wound Whips The MB477 and MBM-477 are a Flexible Helical wound whips specifi cally for the UHF 477 MHz frequency range. The helical design is most useful in circumstances where reduced height and fl exible construction is essential. Alternative mounting options, coaxial feeder cable, water proofi ng and other installation and accessories are all available separately. MB477 MBM-477 Black Heat shrunk helical whip and chrome ferrule UHF 477MHz VSWR <1.5:1 <1.5:1 Tuning Factory Factory 3.0 dbi 3.0dBi Maximum Power 25 Watts 25 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical 360 omnidirectional Fitting Chrome Ferrule, M6 Thread Moulded Base, M6 Thread Height 480 mm 522 mm Weight 47.5 grams 20.5 grams Updated 27th March 2017

49 M99BNC-148 VHF MHz Flexible Helical Wound Whip The M99BNC-148 is a helical wound whip with BNC connector base, specifically for the VHF frequency range. This helical design is most useful in circumstances where reduced height and flexible construction is essential. Alternative mounting options, adaptors, water proofing and other installation accessories are all available separately. M99BNC-148 Black heatshrunk helical whip and chrome BNC connector base VHF MHz Bandwidth Any 5% VSWR Tuning Impedance (nominal) Maximum Power Polarisation Height Weight Connector Mounting <1.5:1 across tuned bandwidth Field tune using SWR meter 2.1 dbi 50 Ohms 25 Watts Vertical 360 omnidirectional 308mm 66grams BNC Male as base BNC male fits to any BNC female terminated device Updated 2nd February 2016

50 M99B-400 & M99U-400 UHF MHz Flexible Whips The M99B-400 and M99U-400 are flexible whips specifically designed to fit to the connection of a portable or vehicle UHF radio. Adaptors, water proofing and other installation accessories are all available separately. M99B-400 M99U-400 Black heatshrunk whip and chrome connector Bandwidth UHF MHz 10MHz UHF MHz 10MHz VSWR Tuning <1.5:1 across bandwidth Field tune using SWR meter 2.1 dbi 2.1 dbi Impedance (nominal) 50 Ohms 50 Ohms Maximum Power 25 Watts 25 Watts Polarisation Vertical Vertical Connector BNC male in base UHF male in base Height 200mm 200mm Weight 30grams 38grams Mounting BNC male fits to any BNC female terminated device UHF male fits to any UHF female terminated device Updated 2nd February 2016

51 M99BNC900 Wireless Data 900MHz Flexible Whip The M99BNC900 is a highly flexible whip specifically designed for wireless data link or NFC (near field communications) within the MHz range. Coaxial feeder cable, adaptors and other installation accessories are all available separately. Bandwidth VSWR Tuning Impedance (nominal) Connector Maximum Power Polarisation Height Weight Mounting M99BNC900 Black heatshrunk whip and chrome connector MHz Full band <1.5:1 full band Factory 2.1 dbi 50 Ohms BNC male as base 25 Watts Vertical 360 omnidirectional 195mm 26grams BNC male fits to any BNC female terminated device Updated 2nd February 2016

52 Flexible Whips VHF MHz or UHF MHz SMA female connector The highly flexible whips are designed to fit onto any portable radio with a SMA male connection. Adaptors, water proofing and other installation accessories are all available separately. ZSMA-165F MW4052 MW4547 Black Thermoplastic Polyether Elastomer (TPEE) outer and chrome termination MHz MHz MHz Bandwidth Full band Full band Full band VSWR <2.5:1 <2.5:1 <1.8:1 Tuning Factory Factory Factory 2.1 dbi 2.1 dbi 2.1 dbi Impedance (nominal) 50 Ohms 50 Ohms 50 Ohms Maximum Power 25 Watts 25 Watts 25 Watts Polarisation Vertical Vertical Vertical Connector 360 Omnidirectional SMA female as base Height 160mm 140mm 175mm Weight 16grams 15grams 16grams Mounting SMA female fits to any SMA male terminated device Updated 2nd February 2016

53 Flexible Whips VHF MHz or UHF MHz SMA Male Connector These selection of highly flexible whips are designed to fit onto any portable radio which have a SMA female connection. Adaptors, water proofing and other installation accessories are all available separately. ZSMA-165 ZSMA-350 ZSMA-435 TW4052 ZSMA-905 Black Thermoplastic Polyether Elastomer (TPEE) outer and chrome termination MHz MHz MHz MHz MHz Bandwidth Full band Full band Full band Full band Full band VSWR <2.5:1 <2.5:1 <2.5:1 <2.5:1 <2.5:1 Tuning Factory Factory Factory Factory Factory 2.1 dbi 2.1 dbi 2.1 dbi 2.1 dbi 2.1 dbi Impedance (nominal) 50 Ohms 50 Ohms 50 Ohms 50 Ohms 50 Ohms Maximum Power 25 Watts 25 Watts 25 Watts 25 Watts 25 Watts Polarisation Vertical Vertical Vertical Vertical Vertical Connector 360 omnidirectional SMA male as base Height 160mm 157mm 95mm 170mm 110mm Weight 20grams 20grams 12grams 20grams 12grams SMA male fits to any SMA female terminated device Updated 2nd February 2016

54 C858 GSM 900 & GSM 1800 Band Portable Stubby Whip The C858 is a small portable whip designed for use on GSM 900 and GSM 1800 band portable devices. The stubby profile of the C858 makes its suitable for overtly space restricted situations. Adaptors, water proofing and other installation accessories are all available separately. Bandwidth VSWR Tuning Impedance (nominal) Maximum Power Polarisation Connector (fitted) Height Weight Mounting C858 Black UV resistant PVC and chrome connector GSM 900: MHz GSM 1800: MHz Full band <3:1 full band Factory 2.1 dbi 50 Ohms 5 Watts Vertical FME female in base 56mm 5grams FME Female fits to any FME male terminated device Updated 2nd February 2016

55 ZYUE-WX-2400 Series GSM or ISM degree swivel whip The ZYUE-WX-2400 series of whips have the added ability to be either set straight, or on a 90 degree bend for those space saving requirements. The ZYUE-WX works within the MHz range for wireless data transmit and receive on the GSM mobile phone network. The ZYUE-WX-2400F and ZYUE-WX-2400F-RPSMA are both designed for WiFi use using the ISM2.4 frequency range. Adaptors, patch leads, water proofing and other installation accessories are all available separately. ZYUE-WX ZYUE-WX-2400F ZYUE-2400F-RPSMA Black moulded whip, 90 degree swivel chrome connector MHz (GSM) GHz (ISM2.4) GHz (ISM2.4) Bandwidth Full band Full band Full band VSWR <2:1 Full band <1.5:1 Full band Tuning Factory Factory Factory 5.5 dbi 5.5 dbi 5.5 dbi Impedance 50 Ohms 50 Ohms 50 Ohms Maximum Power 50 Watts 50 Watts 50 Watts Connector as base SMA Male Reverse polarisation SMA Male Polarisation Vertical, or 90 vertical to your equipment 360 Omnidirectional Height 280mm 220mm 220mm Weight 26grams 26grams 26grams Mounting - SMA Male Mounting - Reverse SMA Male SMA male fits to any SMA female terminated device Reverse SMA male fits to any reverse SMA female termination device Updated 2nd February 2016

56 CB Radio Contents Page 27MHz CB Radio - ZGI40 27MHz, 2.1 dbi, 1.1 metres - ZN MHz, 2.1 dbi, 1.2 metres - ZN5 Series Whips 27MHz, 2.1 dbi, 630mm metres 477MHz UHF CB Mobile - TCMA MHz, 8.2 dbi, 2.2 metres - ZN MHz, 2.1 dbi, 400mm, Quick-Fit - ZN MHz, 6.6 dbi, Detachable, 1.1 metres - ZN MHz, 6.6 dbi, Detachable, 1.2 metres - ZN MHz, 8.1 dbi, Detachable, 2.1 metres - ZN S 477MHz, 6.6 dbi, 900mm, Fibreglass Whip, Parallel Spring - ZN MHz, 6.6 dbi, 950mm, Fibreglass Whip, Barrel Spring - ZN S-TCP 477MHz, 2.1 dbi or 6.6 dbi, 403mm or 900mm, Parallel Spring - ZN TCP 477MHz, 2.1 dbi or 6.6 dbi, 403mm or 900mm, Barrel Spring - ZN S 477MHz, 6.6 dbi, 900mm,Stainless Whip, Parallel Spring - ZN MHz, 6.6 dbi, 950mm, Stainless Whip - SG MHz, 2.1 dbi, 900mm - SGL MHz, 2.1 dbi, 750mm, Lightweight Design - GID480-QF 477MHz, 6.6 dbi, 820mm, Quick-Fit - GIDM & GIDMB Series MHz, 6.1 dbi, 960mm - GRN Series 477MHz, 4 dbi, 330mm - GRMWFC MHz, 2.1 dbi - ZN MHz, 2.1 dbi, 400mm - ZN1 Series Whips 477MHz, 2.1 dbi dbi, 143mm - 640mm Antenna Mounting Brackets and Springs On-Glass 477MHz UHF CB - OZU Series MHz, 2.1 dbi dbi, 230mm - 560mm Antenna Installation Accessories How To Order Terms & Conditions of Sale Contact Us Updated 28th January 2016

57 ZGI40 Series 26MHz or 27MHz Land CB Radio The ZGI40 series are ground independent, 27MHz (AUS) or 26MHz (NZ) land CB radio mobile antenna specifically designed for mounting to the bull bar, guard, boot or truck mirror. No metal ground plane is necessary for effective performance. Please note: The ZGI40-NZ is designed for New Zealand 26MHz CB radio communications. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. ZGI40 ZGI40-NZ Black heatshrunk fibreglass whip, delrin and chrome base Australian Land CB Radio 27MHz New Zealand Land CB Radio 26MHz VSWR <1.5:1 <1.5:1 2.1 dbi 2.1 dbi Maximum Power 50 Watts 50 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector (supplied) 360 omnidirectional 4.5 metres RG58 stranded (bottom exit from base) UHF male PL259 solder connector Height 1.6metres 1.1metre Weight 470grams 470grams (recommneded) Replacement Parts: ZGI40 Replacement Parts: ZGI40-NZ Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole ZGI40-TPM - whip top only - 980mm ZGI40-NZ-TPM - whip top only - 980mm Updated 28th January 2016

58 ZN Ground Independent 27MHz Land CB Radio Whip The ZN is a stainless steel base loaded whip designed and manufactured for 27MHz land CB radio communications for either a vehicle or fixed position mounting. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. ZN Stainless steel whip, delrin and chrome base Land CB radio 27MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Ground Independent Height Weight (order seperate) Factory 2.1 dbi 50 Watts 50 Ohms Vertical 360 omnidirectional No (metal ground plane required) 1.2 metres (no including mount base) 250grams OB-2 / OB4.7 / MGB-OB or any base with 5/16-26 TPI thread. Mount as high on your vehicle/structure as possible using the appropriate base. Updated 28th January 2016

59 ZN5 Series 27MHz Land CB Radio Whips Ground Dependent The ZN5 series of fibreglass whips are specifically designed and manufactured for 27MHz land CB communications. The ZN5 series of whips are ground dependent, which requires a minimum 2.7m x 2.7m metal ground plane to radiate effectively. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. ZN5 Series Black heatshrunk fibreglass with chrome ferrule Land CB radio 27MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Ground Independent (order separate) Factory 2.1 dbi 50 Watts 50 Ohms Vertical 360 omnidirectional No (requries metal ground plane to work effectively) OB-2 / OB4.7 / MGB-OB or any base with 5/16-26 TPI thread. Mount as high on your vehicle/structure as possible using an appropriate base on a minimum 2.7m x 2.7m ground plane. Model Code Height Weight ZN mm 85grams ZN metre 120grams ZN metres 150grams ZN metres 245grams Updated 28th January 2016

60 TC-MA675 Max UHF CB Spring Base Antenna The TC-MA675 UHF CB radio antenna offers the highest gain and maximum reception range within a vehicle mounted UHF CB antenna. The TC-MA675 is suitable for all radios on the market with a UHF female connection. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. VSWR Tuning Maximum Power Impedance Polarisation TC-MA675 White fibreglass radome, chrome ferrule, parallel spring base and coaxial cable assembly UHF CB radio 477MHz <1.5:1 VSWR Factory 8.2 dbi 20 Watts 50 Ohms Vertical 360 Omnidirectional E Plane 13 Cable Connector (supplied) Height Weight (order seperate) 5 metres RG58 stranded (side exit from ferrule) UHF male solder connector 2.2 metres 1.5Kg Bullbar: BBM-SS, BBML-SS or BBMXL-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a 13mm hole or appropriate bracket Updated 29th January 2016

61 ZN Series UHF CB Radio Highly Flexible Quick Fit For owners of our larger high gain ZN3 UHF CB bull bar mount series antenna, the ZN series are the perfect substitute in situations where tall antennas might be subject to damage or high gain is not necessary. Alternative mounting options, connectors and other installation accessories are all available separately. ZN TPM Highly flexible radome and delrin mount ferrule ZN AB Highly flexible radome, delrin ferrule and mount base UHF CB radio 477MHz VSWR <1.5:1 <1.5:1 Tuning Factory Factory 2.1 dbi 2.1 dbi Maximum Power 100 Watts 100 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical 360 omnidirectional Height 400mm 450mm Weight 200grams 500grams Compatible Spring Bases (order separate) Interchangeable with: - ZN Series - ZN Series - ZN Series ZN3-SB-L ZN3-SB-S 4.7 metres cable set wth mounting base and UHF connector (supplied) N/A Updated 29th January 2016

62 ZN Series UHF CB Radio 477MHz Spring Base Antenna The ZN series of UHF CB radio antennas are designed for vehicle mounting on smaller 4WD vehicles, utes and cars. Alternative mounting options, connectors and other installation accessories are all available separately. ZN B ZN W Colour Black White Coloured fibreglass radome, detachable aluminium ferrule, barrel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 <1.5:1 Tuning Factory Factory 6.6 dbi 6.6 dbi Maximum Power 100 Watts 100 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector (fitted) 360 Omnidirectional 4.5 metres RG58 low loss (bottom exit from spring base) FME female (for ease of installation) Adaptor (supplied) FME male to UHF male FME male to UHF male Height 1.1 metres 1.1 metres Weight 925grams 925grams (order seperate) Installation Kit Contents Replacement Parts Bullbar: BBM-SS, BBML-SS or BBMXL-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a 13mm hole or appropriate bracket 3mm Allen key, PVC cap, 8 x cable ties and FME male to UHF male adaptor ZN B-TPM or ZN W-TPM - Antenna top ZN TPM - Highly flexible quick fit top (400mm) Updated 29th January 2016

63 ZN Series UHF CB Radio 477MHz Spring Base Antenna The ZN series of UHF CB radio antennas offers a good balance between size and gain which is well suited for either hilly or flat country. Alternative mounting options, connectors and other installation accessories are all available separately. ZN B ZN W Colour Black White Coloured fibreglass radome, detachable aluminium ferrule, barrel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 <1.5:1 Tuning Factory Factory 6.6 dbi 6.6 dbi Maximum Power 100 Watts 100 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector (fitted) 360 Omnidirectional 4.5 metres RG58 low loss (bottom exit from spring base) FME female (for ease of installation) Adaptor (supplied) FME male to UHF male FME male to UHF male Height 1.2 metres 1.2 metres Weight 1.42Kg 1.42Kg Installation Kit Contents Replacement Parts Bullbar: BBM-SS, BBML-SS or BBMXL-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a 13mm hole or appropriate bracket 3mm Allen key, PVC cap, 8 x cable ties and FME male to UHF male adaptor ZN B-TPM or ZN W-TPM - Antenna top ZN TPM - Highly flexible quick fit top (400mm) Updated 29th January 2016

64 ZN Series UHF CB Radio 477MHz Spring Base Antenna The ZN series of UHF CB radio antennas are specifically designed for vehicle mounting on trucks or large 4WD s. Offering high gain, this antenna will deliver the maximum transmit and receive range suitable for flat ground. Alternative mounting options, connectors and other installation accessories are all available separately. ZN B ZN W Colour Black White Coloured fibreglass radome, detachable aluminium ferrule, barrel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 <1.5:1 Tuning Factory Factory 8.1 dbi 8.1 dbi Maximum Power 100 Watts 100 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable 360 Omnidirectional 4.5 metres RG58 low loss (bottom exit from spring base) Connector (fitted) Adaptor (supplied) FME female FME male to UHF male FME female FME to UHF male Height 2.1 metres 2.1 metres Weight 1.6Kg 1.6Kg (order seperate) Installation Kit Contents Replacement Parts Bullbar: BBM-SS, BBML-SS or BBMXL-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a 13mm hole or appropriate bracket 3mm Allen key, PVC cap, 8 x cable ties and FME male to UHF male adaptor ZN B-TPM or ZN W-TPM - Antenna top ZN TPM - Highly flexible quick fit top (400mm) Updated 29th January 2016

65 ZN S UHF CB 477MHz Fibreglass Whip and Parallel Spring The ZN S is a lightweight ground independent UHF CB Radio antenna perfect for vehicle or fixed position mounting. The S model is fitted with a parallel spring in place of the barrel spring. Alternative mounting options, connectors and other installation accessories are all available separately. ZN S Black heatshrunk fibreglass whip, delrin and chrome feed base, parallel spring base and cable assembly UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (fitted) Adaptor (supplied) Height Weight (order seperate) s Replacement Parts Factory 6.6 dbi 25 Watts 50 Ohms Vertical 360 omnidirectional 4.5 metres RG58 low loss (bottom exit from spring base) FME female (for ease of installation) FME male to UHF male 900mm 500grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole ZN Black heatshrunk 477MHz fibreglass whip Updated 29th January 2016

66 ZN UHF CB Radio 477MHz Fibreglass Whip and Spring base The ZN ground independent UHF CB Radio antenna is a lightweight antenna which delivers excellent performance and medium gain. The ZN is suitable for all radios on the market with a UHF female connection. Alternative mounting options, connectors and other installation accessories are all available separately. ZN Black heatshrunk fibreglass whip, delrin and chrome feed base and barrel spring base UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector Adaptor Height Weight (order seperate) Replacement Parts Factory 6.6 dbi 25 Watts 50 Ohms Vertical 360 omnidirectional 4.5 metres RG58 low loss (bottom exit) FME female (for ease of installation) FME male to UHF male 950mm 700grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole ZN Black heatshrunk 477MHz fibreglass whip Updated 28th April 2015

67 ZN S-TCP UHF CB Radio 477MHz Lightweight Town & Country Pack The ZN S-TCP is the perfect antenna solution for both inner city and country UHF CB requirements. With easy interchangeable whips for both low and medium gain requirements, you are covered no matter what the terrain, all on top of our tried and tested parallel spring base. Alternative mounting options, water proofing and other installation accessories are all available separately. Whip Type ZN S-TCP Black heatshrunk whips, chrome ferrules, chrome and delrin feed mount and parallel spring base Low - ZN High - MB480 UHF CB Radio 477MHz Return Loss, VSWR Better than -15dB, <1.5:1 Tuning Impedance Maximum Power Polarisation Connector (fitted) Adaptor (supplied) Cable Factory Low Whip: 2.1 dbi High Whip: 6.6 dbi 50 Ohms 25 Watts Vertical FME female (for ease of installation) FME male to UHF male 4.5 metres RG58 low loss (bottom exit from spring base) Height Weight - Low - High - Low - High 403mm 900mm 426grams 500grams (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 29th Janaury 2016

68 ZN TCP UHF CB Radio 477MHz Heavy Duty Town & Country Pack The ZN TCP is the perfect dual whip antenna solution for both inner city and country UHF CB requirements. With easy interchangeable whips for both low and medium gain requirements, you are covered no matter what the terrain, all on top of our tried and tested heavy duty barrel spring base. Alternative mounting options, water proofing and other installation accessories are all available separately. Whip Type VSWR Tuning Impedance Maximum Power Polarisation Connector (fitted) Adaptor (supplied) Cable ZN TCP Black heatshrunk whips, chrome ferrules, chrome and delrin feed mount barrel spring base and cable assembly Low - ZN High - ZN UHF CB Radio 477MHz Better than <1.5:1 VSWR Factory Low Whip: 2.1 dbi High Whip: 6.6 dbi 50 Ohms 25 watts Vertical FME female (for ease of installation) FME male to UHF male 4.5 metres RG58 low loss (bottom exit from spring base) Height Weight - Low - High - Low - High 403mm 900mm 426grams 500grams (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 29th January 2016

69 ZN S UHF CB Radio 477MHz Stainless Steel Whip & Parallel Spring The ZN S is a lightweight ground independent UHF CB Radio antenna, perfect for vehicle or fixed position mounting. The S model is fitted with a parallel spring in place of our barrel spring. Alternative mounting options, connectors and other installation accessories are all available separately. ZN S Black stainless steel whip, delrin and chrome feed base and parallel spring base UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (fitted) Adaptor (supplied) Height Weight (order seperate) Replacement Parts Factory 6.6 dbi 25 Watts 50 Ohms Vertical 360 omnidirectional 4.5 metres RG58 low loss (bottom exit) FME female (for ease of installation) FME male to UHF Male 900mm 500grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole ZN Black stainless steel whip Updated 29th January 2016

70 ZN UHF CB Stainless Steel Whip & Spring Base The ZN ground independent UHF CB antenna is a lightweight 477MHz antenna which delivers excellent performance with medium gain. The ZN is suitable for all radios on the market with a UHF female connection. Alternative mounting options, connectors and other installation accessories are all available separately. ZN Black stainless steel whip, delrin and chrome feed base, barrel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (fitted) Adaptor (supplied) Height Weight Replacement Parts Factory 6.6 dbi 25 Watts 50 Ohms Vertical 360 omnidirectional 4.5 metres RG58 low loss (bottom exit from spring base) FME female (for ease of installation) FME male to UHF male 950mm 700grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole ZN Black stainless steel whip Updated 29th January 2016

71 *NEW* SG477-BLKR Series UHF CB Radio 477MHz Spring Base Antenna The all black SG477-BLKR series of UHF CB radio antennas are designed for vehicle or fixed position mounting. The SG477-BLKR series is identical in appearance with the SGDB- BLKR mobile phone series and SG1100-BLKR AM/FM series. The SG477-BLKR series is suitable for all UHF CB radios on the market with UHF female input connection. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. SG477-BLKR Series Black Coloured fiberglass radome, aluminium ferrule, barrel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight (order seperate) (recommneded) Factory 2.1 dbi 20 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 low loss (side exit) UHF male solder connector 900mm 900grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 1st August 2017

72 SG477 Series UHF CB Radio 477MHz Spring Base Antenna The SG477 series of UHF CB radio antennas are designed for vehicle or fixed position mounting. The SG477 series is identical in appearance with the SGDB mobile phone series and SG1100 AM/FM series. The SG477 series is suitable for all UHF CB radios on the market with UHF female input connection. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Colour SG477 Black, Brown or White (specify when ordering) Coloured fiberglass radome, aluminium ferrule, barrel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight (order seperate) (recommneded) Factory 2.1 dbi 20 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 low loss (side exit) UHF male solder connector 900mm 900grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 29th January 2016

73 *NEW* SGL477-BLKR Series UHF CB Radio 477MHz Parallel Spring Base The SGL477-BLKR series is a lightweight UHF CB radio antenna designed for vehicle mounting on small 4WD s, utes or cars. The SGL477-BLKR series are identical in appearance with the SGLDB-BLKR mobile phone series and SGL1100 AM/FM series. The SGL477-BLKR series are suitable for all UHF CB radios on the market with UHF female input connection. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Colour SGL477-BLKR Series All Black Coloured fibreglass radome, aluminium ferrule, parallel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight Factory 2.1 dbi 20 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 low loss (bottom exit from spring base) UHF male solder connector 750mm 650grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 1st August 2017

74 SGL477 Series UHF CB Radio 477MHz Parallel Spring Base The SGL477 series is a lightweight UHF CB radio antenna designed for vehicle mounting on small 4WD s, utes or cars. The SGL477 series are identical in appearance with the SGLDB mobile phone series and SGL1100 AM/FM series. The SGL477 series are suitable for all UHF CB radios on the market with UHF female input connection. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Colour SGL477 Specify Black, Brown or White when ordering Coloured fibreglass radome, aluminium ferrule, parallel spring base and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight Factory 2.1 dbi 20 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 low loss (bottom exit from spring base) UHF male solder connector 750mm 650grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 29th January 2016

75 GID-M480-QF UHF CB Radio 477MHz Quick Fit Ground Independent The GID-M480-QF Quick Fit ground independent UHF CB radio antenna features a UHF male connector in the Quick Fit base, which fits onto a right-angle UHF female base. The unique design makes installation so simple with the additional benefit of being easily removed if you are concerned about damage, vandalism or theft. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. GID-M480-QF Black powdercoated whip, delrin and chrome feed base UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Connector (fitted) Height Weight (order seperate) Factory 6.6 dbi 50 Watts 50 Ohms Vertical 360 omnidirectional UHF male in base of feed base 820mm 380grams MGBIM-UHF / MGB-UHF / RA4.7 with any 16mm hole or bracket As high on your vehicle/structure as possible using an appropriate base and/or bracket Updated 29th January 2016

76 GID Series UHF CB Radio 477MHz Ground Independent These GID ground independent, lightweight design antennas are designed for UHF CB radio communications. These antennas are suitable for all UHF CB radios on the market with UHF female input connection. Alternative mounting options, adaptors, connector and other installation accessories are all available separately. GID-M480 Black powdercoated whip, delrin and chrome feed base and spring base GID-MB480 Black heatshrunk fibreglass whip, delrin and chrome feed base and spring base UHF CB radio MHz VSWR <1.5:1 <1.5:1 Tuning Factory Factory 6.1 dbi 6.1 dbi Maximum Power 25 Watts 25 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector (supplied) 360 omnidirectional 4.5 metres RG58 low loss (bottom exit from base) UHF male solder connector Height 800mm 850mm Weight 960grams 970grams (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 10mm hole or appropriate bracket with a 10mm hole Updated 29th January 2016

77 GRN series Highly Flexible Quick-Fit Ground Indepedent UHF CB Radio The GRN half wave UHF CB radio antennas feature a highly flexible PVC top which is virtually unbreakable. Perfect for rugged off-road driving, forklifts and tractors, these ground independent mobile antennas can be mounted in various positions and offer effective performance. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. GRN480 GRN480-TPM GRNFC480 Includes Antenna Top, RA4.7 Antenna Top Antenna, 4.7m fixed cable Detachable Top Yes Yes No Frequency Delrin ferrule, highly flexible black PVC radome 477MHz UHF CB VSWR Less than 1.5:1 Tuning Factory Factory Factory 4 dbi 4 dbi 4 dbi Maximum Power 50 Watts 50 Watts 50 Watts Impedance 50 Ohms 50 Ohms 50 Ohms Polarisation Vertical Vertical Vertical 360 omnidirectional Height 330mm 330mm 330mm Weight 360 grams 115 grams 320 grams Connector (supplied) UHF Male None UHF Male Included RA4.7 Select and Order separately As high on your vehicle/structure as possible using a minimum 16mm hole or appropriate bracket with a 16mm hole Updated 29th January 2016

78 GRMWFC477 UHF CB Radio 477MHz Ground Independent Whip The GRMWFC477 is a ground independent, half wave, end fed, UHF CB Radio vehicle mount antenna. The light weight design makes this antenna the ideal choice for mounting in any position on a vehicle or even a truck mirror with the appropriate bracket. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Height Weight Cable Connector (fitted) Adaptor (supplied) (order seperate) GRMWFC477 Stainless steel phased coil whip, delrin and chrome base and cable assembly UHF CB Radio MHz Full band <1.5:1 across full band Factory 2.1 dbi 50 Watts 50 Ohms Vertical 360 omnidirectional 650mm 400grams 4.7 metres RG58 stranded (bottom exit) FME female FME male to UHF male adaptor Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 29th January 2016

79 ZN UHF CB Radio 477MHz Highly Flexible The ZN is a highly flexible low profile half wave UHF CB antenna ideally suited to vehicle or fixed position mounting. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. ZN Highly flexible radome, chrome ferrule and coaxial cable assembly UHF CB radio 477MHz VSWR <1.5:1 Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight (order seperate) (recommneded) Factory 2.1 dbi 100 Watts 50 Ohms Vertical 360 omnidirectional 4.5 metres RG58 stranded (bottom exit from base) UHF male solder connector 400mm 300grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 10mm hole or appropriate bracket with a 10mm hole Updated 29th January 2016

80 ZN1 Series UHF CB Radio 477MHz Stainless steel phased coil and Fibreglass Whips The ZN1 series of whips are specifically designed and manufactured for UHF CB radio 477MHz. The ZN1 series of whips can be fitted on any antenna base with a 5/16-26TPI thread in either a vehicle or fixed position mounting. Please note the ZN and ZN are also available in white. Alternative mounting, adaptors, connectors and other installation accessories are all available separately. ZN ZN ZN ZN Black heatshrunk whip and chrome ferrule Black powdercoated whip and ferrule Black heatshrunk fibreglass whip, chrome ferrule Black heatshrunk whip and chrome ferrule UHF CB radio 477MHz VSWR <1.5:1 <1.5:1 <1.5:1 <1.5:1 2.1 dbi 6.6 dbi 6.6 dbi 6.6 dbi Maximum Power 20 Watts 20 Watts 20 Watts 20 Watts Impedance 50 Ohms 50 Ohms 50 Ohms 50 Ohms Polarisation Vertical Vertical Vertical Vertical 360 omnidirectional Height 143mm 600mm 640mm 1.225m Mount Ferrule 5/16-26 Brass female thread in ferrule (order seperate) - OB-2 - OB MGB-OB - OB-2 - OB MGB-OB OB-2 OB-4.7 MGB-OB - OB-2 - OB MGB-OB As high on your vehicle/structure as possible using an appropriate 16mm 16mm hole or appropriate bracket with a 16mm hole or magnetic base. Updated 29th January 2016

81 Antenna Brackets & Springs Page 1 of 4 This selection of stainless steel brackets are available to stud mount antennas in various positions. These brackets are mostly used to mount onto your vehicle, they can also be useful for fixing antennas to buildings or facia boards. Each bracket has a 13, 16 or 17mm diamater hole through which the antenna is secured. 16mm hole GM1 L Bracket for Guard mount 1.6mm stainless steel 2 holes for screws/bolts Also suits facia board 16mm hole GM2 Z Bracket for Guard mount 1.6mm stainless steel 2 drillled holes for screws 1 drillled hole for bolt/stud 16mm hole GM4 Z Bracket for Guard mount 3mm black stainless steel 2 drillled holes for screws 1 drillled hole for bolt/stud 13mm slot GM5 Slotted L bracket 0.7mm stainless steel 3 holes for screws/bolts Suits light stud mount 16mm slot GM6 Slotted L bracket 0.7mm stainless steel 3 holes for screws/bolts Suits light stud mount 16mm hole MRM-SS Bracket for mirror 20mm diameter tube max. All stainless steel Includes bolts/nuts/washers 17mm hole ATLM (Black or Chrome) Rotating/tilt bracket Zinc alloy/ stainless steel 225grams Suits bonnet/door/boot Updated 29th January 2016

82 Antenna Brackets & Springs Page 2 of 4 This selection of stainless steel bull bar mounting brackets are available ranging from a small diameter bull bar, up to a large diamateter bull bar. Each bracket has a 16mm diamater hole through which the antenna is secured. BBM-SS Bracket for Bull Bar 50mm diameter tube max. All stainless steel Includes U-bolts/nuts/washers BBML-SS Medium Bracket for Bull Bar 65mm diameter tube max. All Stainless Steel Includes U-bolts/nuts/washers 16mm hole 16mm hole BBMXL-SS Large Bracket for Bull Bar 76mm diameter tube max. All Stainless Steel Includes U-bolts/nuts/washers 16mm hole Updated 29th January 2016

83 Antenna Brackets & Springs Page 3 of The 1269 electro-polished stainless steel barrel spring has be used successfully on our popular SG range of antennas for decades. 105mm tall x 45mm diameter 1/2-12 BSW thread both ends Includes a 1/2-12 BSW bolt and spring washer The electro-polished stainless steel barrel spring has be used successfully on our popular SG range of antennas for decades. 105mm tall x 45mm diameter M10 thread in top M12 stud in base Includes a M12 stud and split nut The 1270 heavy duty stainless steel parallel spring is ideal for mounting very tall antennas to a vehicle bull bar. Highly recommended for tough/rough terrain. 105mm tall x 45mm diameter 1/2-12 BSW thread both ends Includes a 1/2-12 BSW bolt and spring washer The 1570 stainless steel spring allows the antenna cable to pass through the centre of the spring and exit through the base. 50mm tall x 20mm diameter M10 thread both ends suitable for GRHFC/GIDM90T 5/16-26 TPI male and female threads Updated 29th January 2016

84 Antenna Brackets & Springs Page 4 of 4 MS Base The MS Base medium duty stainless steel spring will suit and mobile whip being mounted on our OB-2 antenna base. 60mm tall x 20mm diameter 5/16-24 TPI male and female threads ZN3-SB-S ZN3-SB-L The ZN3-SB-S stainless steel barrel spring base and cable assembly are suited for the ZN medium duty UHF CB radio antenna. 153mm tall x 55mm diameter Top mount UHF female connector 4.5 metre RG58 low loss cable 1/2-12 BSW thread Includes 1/2-12 BSW stud and split nut Install Kit - 3mm allen key, PVC cap, solder, UHF male connector and 8 cable ties The ZN3-SB-L heavy duty stainless steel barrel spring base and cable assembly are suited for models such as the ZN or ZN CB radio antennas. 165mm tall x 20mm diameter Top mount UHF female connector 4.5 metre RG58 low loss cable 1/2-12 BSW thread Includes 1/2-12 BSW stud and split nut Install Kit - 3mm allen key, PVC cap, solder, UHF male connector and 8 cable ties Updated 29th Janaury 2016

85 OZU-1 & OZU-3 UHF CB Radio 477MHz Vehicle On-Glass Mount A vehicle on-glass mount, UHF CB radio antenna is a popular alternative to other bracket mounted antenna.these OZU series on- glass UHF models are simple to install, just peel, place and connect. Please note: The internal adhesive ground plane strips should not be trimmed. Unit should not be adhered to any window with heater dimister elements or UV tinting. Adaptors, connectors and other installation accessories are all available separately. OZU-1 OZU-3 Black stainless steel whip, thermoplastic base Bandwidth UHF MHz Any 15MHz UHF MHz Any 20MHz VSWR Tuning <2:1 across bandwidth <2:1 across bandwidth Field tuning using capacitor and ATU 5.1 dbi 2.1 dbi OZU-1 Impedance 50 Ohms 50 Ohms Maximum Power 50 Watts 50 Watts Polarisation Vertical Vertical Cable (supplied) Connector (junction box) Connector (Radio) Mini-UHF 360 omnidirectional 4.5 metres RG58 low loss Mini-UHF Order seperately on order Whip Type 5/8 λ (Wave) 1/4 λ (Wave) Height 560mm 230mm Weight 300grams 300grams Installation Kit Contents Mounting Postion 3mm allen key, alcohol glass wip, installation/tuning guide Mount on either windscreen or rear window on clear glass, where heating elements, imbedded antennas, metallic flakes or tint are not present. OZU-3 Updated 29th January 2016

86 Accessories Stainless Steel & Black Nylon Cable Ties Cable ties both Stainless Steel or Black nylon are a crucial accessories for any antenna system installation. PVC tape, amalgamation tape, grommets and other installation accessories are all available separately. Stainless Steel Order Code 8117 Bag of 100, 316 Grade, 360mm long x 4.6mm Bag of 100, 316 grade, 200mm long x 4.6mm Bag of 100, 316 grade, 450mm long x 4.6mm Bag of 100, 316 grade, 600mm long x 4.6mm 8125 Stainless steel cable tie tensioner required to tighten stainless steel cable ties. Fits cable ties quick, easy and neat. Black Nylon Order Code Bag of 100, 100mm long 8529 Bag of 100, 200mm long 8530 Bag of 100, 300mm long Updated 29th January 2016

87 Accessories Water-proofing Water-proofing is an essential step in any antenna installation whether it s a mobile, marine, base station or broadcast system, correct water-proofing can lengthen the life of your antenna system Consult ZCG for advice on correct water-proofing for your requirements. Order Codes PVC electrical insulating tape, black, 19mm wide x 0.18mm thick, 20 metre roll Self-bonding amalgamating electrical tape, 19mm wide x 0.76mm thick, 9.15m roll 8574 Alternative colours of 8651 are available, consult ZCG with your requirements. Cable Gland Order Code 8485 Black PVC, 5-10mm capability Black PVC, 11-17mm capability Grey PVC, 5-10mm capability Grey PVC, 18-24mm capability Black PVC, suitable for 7/8 cable Cable Grommet Order Code 5591 Bag 100, Nitrile grommet for RG Single Nitrile grommet for RG58 Updated 29th Janaury 2016

88 Mobile Phone/ Wireless Data Contents Page Vehicle Bull Bar Mount - TC1600 Series Telstra 3G or Telstra, Optus & Vodafone GSM, 8.1 dbi - SGDB Series Telstra, Optus & Vodafone 4G, 3G & GSM, 6.2 dbi & 3 dbi - SGDB-BLKR Telstra, Optus & Vodafone 4G, 3G & GSM, 6.2 dbi & 3 dbi -ALL BLACK - ZN3-SGDB-11 Series Telstra, Optus & Vodafone 4G, 3G & GSM, 6.2 dbi & 3 dbi, Detachable - ZIR-1626-RC Satellite Communcations, MHz, 5 dbi Vehicle Guard, Boot or Mirror Mount - GIDM90T Series Telstra 3G or Telstra, Oputs & Vodafone GSM, 5.1 dbi - GIDM-DB Telstra 3G & Telstra, Optus & Vodafone GSM, 2.1 dbi - SGLDB Series Telstra, Optus & Vodafone 4G, 3G & GSM, 6.2 dbi & 3dBi - SGLDB-DT Testra, Optus & Vodafone 4G,3G &GSM, 6.2 dbi & 3dBI, Detachable - SGLDB-BLKR Telstra, Optus & Vodafone 4G, 3G & GSM, 6.2 dbi & 3dBi -ALL BLACK - SG700-4GX Mobile Phone Collinear, MHz, Maximum 4GX Network - SGL2000 Optus 3G upper, MHz, 6.2 dbi Antenna Brackets & Springs Vehicle On-Glass Mount - OG835 Telstra, 3G and Telstra, Optus & Vodafone GSM, 7.2 dbi - OG8-TB Telstra Optus, & Vodafone 4G, Next G, 3G & GSM, 5 dbi - OGI-08-4 Telstra Optus & Vodafone 4G, Next G, 3G & GSM, 1.5 dbi - OGI-EPH401 Telstra, Optus & Vodafone 4G, Next G & GSM, 2.1 dbi Magnetic Base Mount - MAG-CELL-DB Telstra 3G & 4G, 3.1 dbi - MAGM90T Series Telstra 3G or Telstra, Optus & Vodafone GSM, 5 dbi Whips, Bases & Cable Assemblies Low Profile, Rugged, Covert - ZCG-EEH-L01 Telstra, Optus & Vodafone 4G LTE, 4G, 3G & GSM, 6 dbi & 2.75 dbi, 80mm - CT700 UHF, Cellular Antenna, 4GX, 2.1 dbi - CT800 & CT900 Telstra 3G or Telstra/Optus/Vodafone GSM, 2.1 dbi - GCRFA & GCT Mobile Phone/ Wireless Data, GPS & WiFi, 1 dbi & 27dB typical - ZAW-9-LTE GPS,Cellular and WIFI, Low Profi le, Non Terminated - ZAU-3C Series Mobile Phone/ Wireless Data & GPS, 1 dbi and 27 db typical, FME and SMA - ZAU-3S Series Mobile Phone/ Wireless Data, GPRS & GPS, SMA only - ZAU-9-LTE GPS,Cellular and WIFI, Low Profi le, Terminated SMA How to Order Terms and Conditions of Sale Updated 23rd March 2017

89 TC1600 Series Telstra 3G or Telstra, Optus & Vodafone GSM Mobile Phone/Wireless Data Improvement The TC1600 series antennas offer the maximum gain and reception range practical in a broadband vehicle mounted mobile phone/ wireless data improvement antenna. The TC1600 series are ground independent and do not require a metal ground plane to operate effectively. Mounting brackets, adaptors and other installation accessories are all available separately. TC1600-A TC1600-D Colour White White White radome, chrome ferrule and spring base Bandwidth Telstra 3G MHz Full band Telstra, Optus & Vodafone GSM MHz Full band VSWR <1.5:1 <1.5:1 Tuning Factory Factory 8.1 dbi 8.1 dbi Maximum Power 30 Watts 30 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical 360 omnidirectional E Plane Cable 5 metres RG58 low loss (side exit) Connector (fitted) FME female FME female Height 2.2 metres 2.2 metres Weight 1.5Kg 1.5Kg (order seperate) Bullbar: BBM-SS, BBML-SS or BBMXL-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 28th January 2016

90 SGDB Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone/ Wireless Data Improvement The SGDB series of super gain mobile phone antennas offer fine performance combined with our robust tried and tested ZCG quality construction. The SGDB antenna is identical in appearance to SG477 series and SG1100 series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. SGDB Series Order Code Black - SGDB-B White - SGDB-W Grey - SGDB-G Brown - SGDB-BR Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Coloured fibreglass radome, aluminium mount ferrule and cap and stainless steel barrel spring base Telstra, Optus & Vodafone 4G, Next G, 3G and GSM MHz & MHz Full band <1.6:1 full band Factory 6.2 dbi ( MHz) and 3 dbi ( MHz) 30 Watts 50 Ohms Vertical 360 omnidirectional E Plane 32 Cable Connector (fitted) Height Weight (order seperate) 5 metres RG58 low loss (side exit from ferrule) FME female 900mm 900grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 28th January 2016

91 *NEW* SGDB-BLKR Series Telstra, Optus & Vodafone 4G, 3G & GSM Mobile Phone/ Wireless Data Improvement The All Black SGDB-BLKR series of super gain mobile phone antennas offer fine performance combined with our robust tried and tested ZCG quality construction. The SGDB-BLKR antenna is identical in appearance to SG477-BLKR series and SG1100-BLKR series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation SGDB-BLKR Series Black Coloured fibreglass radome, aluminium mount ferrule and cap and stainless steel barrel spring base Telstra, Optus & Vodafone 4G, Next G, 3G and GSM MHz & MHz Full band <1.6:1 full band Factory 6.2 dbi ( MHz) and 3 dbi ( MHz) 30 Watts 50 Ohms Vertical 360 omnidirectional E Plane 32 Cable Connector (fitted) Height Weight (order seperate) 5 metres RG58 low loss (side exit from ferrule) FME female 900mm 900grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Updated 1st August 2017

92 ZN3-SGDB-11 Telstra, Optus & Vodafone 4G, 3G & GSM Detachable Mobile Phone/Wireless Data Improvment Designed for mounting to a vehicle, the ZN3-SGDB-11 series detachable antenna is your ideal solution for vehicle mounted Telstra, Optus & Vodafone 4G, 3G & GSM network coverage improvment. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Colour Bandwidth Tuning Maximum Power Impedance Polarisation ZN3-SGDB-11 Series Specify Grey, Black or White Coloured fibreglass radome, detachable aluminium ferrule, barrel spring base and cable assembly Telstra, Optus & Vodafone 4G, 3G & GSM MHz & MHz Full band Factory 6.2 dbi ( MHz) and 3 dbi ( MHz) 30 Watts 50 Ohms Vertical 360 omnidirectional E Plane 32 Cable Connector (fitted) Height Weight (order seperate) Installation Kit Contents 4.5 metres RG58 low loss (bottom exit from spring) FME female 1.2 metres 925grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Allen key, PVC cap, 6 cable ties Updated 28th January 2016

93 ZIR-1626-RC Satellite Phone Communcations or Fixed Position The ZIR-1626-RC is specifcally designed and manufactured for satellite phone communications. For the best possible performance, clear line of site to the sky without any obstructions is required. Obstructions such as trees or buildings will dramatically reduce performance leading to signal and reception loss. Mounting brackets,adaptors, connectors and other installation accessories are all available separately. Bandwidth Tuning VSWR Maximum Power Impedance Polarisation ZIR-1626-RC Black fibreglass radome, aluminium ferrule and stainless steel barrel spring and cable base MHz Full band Factory <2:1 full band 25 Watts 5 dbi 50 Ohms Right-hand circular -15 to +60 DC Grounding Connector (fitted) Cable Height Weight (order seperate) Yes TNC male 5 metres RG58 Low Loss (bottom exit from spring) 800mm 2.7Kg Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle or structure as possible with clear line of site with sky and no obstructions such as other antennas, trees or infastructure. Updated 28th January 2016

94 GID-M90T Series Telstra 3G or Telstra, Optus & Vodafone GSM Mobile Phone/ Wireless Data Improvement GID-M90T ground independent vehicle mount antennas are useful for mobile phone/data network coverage improvements within Telstra 3G or Telstra, Optus & Vodafone GSM bands. These models are a modest size and will deliver excellent performance. No metal ground plane is necessary for the antenna to operate effectively. Alternative mounting brackets, coaxial feeder cable, connectors and other installation accessories are all available separately. GID-M90T-Next G GID-M90T-GSM Black powdercoated phase coil whip, chrome and delrin base and coaxial cable assembly Telstra 3G MHz Telstra, Optus & Vodafone GSM MHz VSWR <1.6:1 full band <1.6:1 full band Tuning Factory Factory GID-M90T-Next G 5.1 dbi 5.1 dbi Maximum Power 5 Watts 5 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Cable Connector (fitted) 4.5 metres RG58 low loss exits bottom of base FME female Height 45cm 40cm Weight 350grams 350grams (order seperate) Secure to any minimum 10mm hole or appropriate bracket with a minimum 10mm hole using the split nut attached. As high on your vehicle/structure as possible using an appropriate mount hole or bracket GID-M90T-GSM Updated 28th January 2016

95 GIDM-DB Telstra 3G/GSM & Optus & Vodafone GSM Mobile Phone and Wireless Data Improvement The GIDM-DB is a ground independent, dual band antenna specifically designed and manufactured for full coverage of the Telstra 3G & GSM as well as Optus & Vodafone GSM networks for wireless data and mobile phone improvement. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Cable Connector (fitted) Height Weight (order Seperate) GIDM-DB Black Plastic outer, stainless steel and black delrin base and coaxial cable assembly Telstra 3G/GSM & Optus & Vodafone GSM MHz Full band <1.6:1 full band Factory 2.1 dbi 5 Watts 50 Ohms Vertical 5 metres RG58 low loss (bottom exits base) FME female 270mm 280grams Secure to any minimum 10mm hole or appropriate bracket with a minimum 10mm hole using the split nut attached. As high on your vehicle/structure as possible using an appropriate mount hole or bracket Updated 28th January 2016

96 SGLDB Series Telstra, Optus & Vodafone 4G, 3G and GSM Lightweight Mobile Phone/Wireless Data Improvement The SGLDB series of super gain light weight mobile phone antennas offer fine performance combined with our robust tried and tested ZCG quality construction. The SGLDB Series are identical in appearance to the SGL477 Series and SGL1100 Series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Colour Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Cable Connector (fitted) Height Weight (order seperate) SGLDB Specify Brown, Black or White when ordering Coloured fibreglass radome, aluminium mount ferrule, parallel spring and coaxial cable assembly Telstra, Optus & Vodafon 4G, 3G and GSM MHz & MHz Full band <1.6:1 across full band Factory 6.2 dbi ( MHz) and 3 dbi ( MHz) 30 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 low loss (bottom exit from spring base) FME female 750mm 650grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 16mm hole or appropriate bracket with a 16mm hole Updated 28th January 2016

97 *NEW* SGLDB-BLKR Series The NEW SGLDB-BLKR series of super gain with the stylish all black, light weight mobile phone antennas. The SGLDB-BLKR offer fine performance combined with our robust tried and tested ZCG quality construction. The SGLDB Series are identical in appearance to the SGL477 Series and SGL1100 Series. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. Telstra, Optus & Vodafone 4G, 3G and GSM Lightweight Mobile Phone/Wireless Data Improvement Colour Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Cable Connector (fitted) Height Weight (order seperate) SGLDB-BLKR Series All Black with Black Spring Black fibreglass radome, aluminium mount ferrule, parallel spring and coaxial cable assembly Telstra, Optus & Vodafone 4G, 3G and GSM MHz & MHz Full band <1.6:1 across full band Factory 6.2 dbi ( MHz) and 3 dbi ( MHz) 30 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 low loss (bottom exit from spring base) FME female 750mm 650grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 16mm hole or appropriate bracket with a 16mm hole Updated 1st August 2017

98 *NEW* SGLDB-DT Telstra, Optus & Vodafone 4G, 3G & GSM Mast Mount Mobile Phone/ Wireless Data The SGLDB-DT super gain mobile antenna is a popular choice to improve your mobile phone or wireless data reception. The SGLDB-DT detatchable antenna allows quick change over if the antenna is damaged or when entering low hight areas such as car washes and car parks, also providing extra security. The antennas are provided with a waterproof sealing cap to prevent the ingress of dust and water when the whip section is removed. Easily Installed and accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation SGLDB-DT Black fibreglass radome, aluminium ferrule and mast mount, cable assembly and termination Telstra, Optus & Vodafone 4G, Next G, 3G and GSM MHz & MHz Full band <1.6:1 across full band Factory 6.2 dbi ( MHz) and 3 dbi ( MHz) 30 Watts 50 Ohms Vertical 360 omnidirectional E Plane 32 Cable Connector (fitted) Height Mounting Replacement top available 5 metres RG58L/L FME female 90cm Any position with a 13mm hole As high on your vehicle as possible SGLDB-DT-TPM Updated 9th September 2016

99 SG700-4GX MHz Mobile Phone Collinear The SG700-4GX will significantly improve your 4GX wireless data transmit and receive capabilities. Designed for maximum and Pattern for the Telstra 4GX Network. Mounting accessories, adaptors, water-proofing and other installation accessories are all available separately. Colour Tuning Impedance Polarisation SG700-4GX Black Coloured fibreglass radome, aluminium ferrule, barrel spring and cable assembly MHz Factory 5.1 dbi 50 Ohms Vertical 360 Omnidirectional Cable 4.5 metres RG58 stranded (side exit from ferrule) Connector (fitted) Height Weight (order seperate) FME Female 1050 mm 850 grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 or A-6211 Mount as high on your vehicle, structure, mast or tower as possible using the appropriate mounting bracket. Updated 24nd February 2017

100 SGL2000 Series Optus 3G Lightweight Mobile Phone/Wireless Data Improvement The SGL2000 series are specifically designed for the Optus 3G mobile phone network, and offers consistent and dependable performance with maximum efficiency, particularly where signal strength is poor. Mounting accessories, adaptors, alternative connectors and other installation accessories are all available separately. Order Code Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Cable Connector (supplied) Height Weight (order seperate) SGL2000 Black: SGL2000-B White: SGL2000-W Coloured fibreglass radome, aluminium ferrule and cap and stainless steel spring base Optus 3G MHz Full band <1.6:1 across full band Factory 6.2 dbi 30 Watts 50 Ohms Vertical 360 omnidirectional 5 metres RG58 low loss (bottom exit from spring base) FME female 480mm 600grams Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle/structure as possible using a minimum 16mm hole or appropriate bracket with a 16mm hole Updated 28th January 2016

101 Antenna Brackets & Springs Page 1 of 4 This selection of stainless steel brackets are available to stud mount antennas in various positions. These brackets are mostly used to mount onto your vehicle, they can also be useful for fixing antennas to buildings or facia boards. Each bracket has a 13, 16 or 17mm diamater hole through which the antenna is secured. 16mm hole GM1 L Bracket for Guard mount 1.6mm stainless steel 2 holes for screws/bolts Also suits facia board 16mm hole GM2 Z Bracket for Guard mount 1.6mm stainless steel 2 drillled holes for screws 1 drillled hole for bolt/stud 16mm hole GM4 Z Bracket for Guard mount 3mm black stainless steel 2 drillled holes for screws 1 drillled hole for bolt/stud 13mm slot GM5 Slotted L bracket 0.7mm stainless steel 3 holes for screws/bolts Suits light stud mount 16mm slot GM6 Slotted L bracket 0.7mm stainless steel 3 holes for screws/bolts Suits light stud mount 16mm hole MRM-SS Bracket for mirror 20mm diameter tube max. All stainless steel Includes bolts/nuts/washers 17mm hole ATLM (Black or Chrome) Rotating/tilt bracket Zinc alloy/ stainless steel 225grams Suits bonnet/door/boot Updated 29th January 2016

102 Antenna Brackets & Springs Page 2 of 4 This selection of stainless steel bull bar mounting brackets are available ranging from a small diameter bull bar, up to a large diamateter bull bar. Each bracket has a 16mm diamater hole through which the antenna is secured. BBM-SS Bracket for Bull Bar 50mm diameter tube max. All stainless steel Includes U-bolts/nuts/washers BBML-SS Medium Bracket for Bull Bar 65mm diameter tube max. All Stainless Steel Includes U-bolts/nuts/washers 16mm hole 16mm hole BBMXL-SS Large Bracket for Bull Bar 76mm diameter tube max. All Stainless Steel Includes U-bolts/nuts/washers 16mm hole Updated 29th January 2016

103 Antenna Brackets & Springs Page 3 of The 1269 electro-polished stainless steel barrel spring has be used successfully on our popular SG range of antennas for decades. 105mm tall x 45mm diameter 1/2-12 BSW thread both ends Includes a 1/2-12 BSW bolt and spring washer The electro-polished stainless steel barrel spring has be used successfully on our popular SG range of antennas for decades. 105mm tall x 45mm diameter M10 thread in top M12 stud in base Includes a M12 stud and split nut The 1270 heavy duty stainless steel parallel spring is ideal for mounting very tall antennas to a vehicle bull bar. Highly recommended for tough/rough terrain. 105mm tall x 45mm diameter 1/2-12 BSW thread both ends Includes a 1/2-12 BSW bolt and spring washer The 1570 stainless steel spring allows the antenna cable to pass through the centre of the spring and exit through the base. 50mm tall x 20mm diameter M10 thread both ends suitable for GRHFC/GIDM90T 5/16-26 TPI male and female threads Updated 29th January 2016

104 Antenna Brackets & Springs Page 4 of 4 MS Base The MS Base medium duty stainless steel spring will suit and mobile whip being mounted on our OB-2 antenna base. 60mm tall x 20mm diameter 5/16-24 TPI male and female threads ZN3-SB-S ZN3-SB-L The ZN3-SB-S stainless steel barrel spring base and cable assembly are suited for the ZN medium duty UHF CB radio antenna. 153mm tall x 55mm diameter Top mount UHF female connector 4.5 metre RG58 low loss cable 1/2-12 BSW thread Includes 1/2-12 BSW stud and split nut Install Kit - 3mm allen key, PVC cap, solder, UHF male connector and 8 cable ties The ZN3-SB-L heavy duty stainless steel barrel spring base and cable assembly are suited for models such as the ZN or ZN CB radio antennas. 165mm tall x 20mm diameter Top mount UHF female connector 4.5 metre RG58 low loss cable 1/2-12 BSW thread Includes 1/2-12 BSW stud and split nut Install Kit - 3mm allen key, PVC cap, solder, UHF male connector and 8 cable ties Updated 29th Janaury 2016

105 OG835 Telstra 3G/GSM & Optus & Vodafone GSM Adhesive On-Glass Mobile Phone/Wireless Data Improvement Small and unobtrusive, an on-glass mobile phone/wireless data antenna is a popular alternative to other bracket mounted antennas. With an easy peel and place of the adhesive pads, installation of the OG835 is simple and secure. Adaptors, and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Connector (fitted) Cable Assembly Height Weight Mounting Installation Kit Contents OG835 Black whip, black moulded adhesive base Telstra 3G & GSM & Optus/Vodafone GSM MHz Full band <2:1 across full band Factory 7.2 dbi 5 Watts 50 Ohms Vertical Termination Box: UHF Female Termination Box Cable: UHF Male Cable Termination: FME Female 4 metres RG58 low loss 395mm 250grams Adhesive pad on radiating boxes Interior & exterior of windscreen or rear window glass of vehicle where tint/heating elements or metallic flakes are not present. Alcohol wipe and adhesive pads Updated 28th January 2016

106 OG8-TB Telstra, Optus & Vodafone 4G, 3G & GSM Adhesive On-Glass Mobile Phone/Wireless Data Improvement Small and unobtrusive, an on-glass mobile phone/wireless data antenna is a popular alternative to other bracket mounted antennas. With an easy peel and place of the adhesive pads, installation of the OG8-TB is simple and secure. Adaptors, connectors and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Cable Set (supplied) Height Weight Mounting Installation Kit Contents OG8-TB Black whip, black moulded radiating base and adjustable whip base Telstra, Optus & Vodafone 4G, 3G & GSM MHz, MHz & 2170MHz Full band <2:0 across full band Factory 5dBi 5 Watts 50 Ohms Vertical 5 metres RG58/U with FME female SMA Female fitted 180mm 250grams Adhesive pad on radiating boxes. Ensure 90 offset of interior radiating box. Interior & exterior of windscreen or rear window glass of vehicle where tint/heating elements or metallic flakes are not present. Alcohol wipe and adhesive pads Please Note: Interior panel must be offset 90 of exterior panel. Updated 28th January 2016

107 OGI-08-4 Telstra, Optus & Vodafone 4G, 3G & GSM Adhesive On-glass Mobile Phone/Wireless Data Improvement This OGI-08-4 on-glass antenna sticks to the inside of a vehicle windscreen and will improve mobile phone and wireless data reception while travelling. Alternative adaptors, connectors and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Cable Connector (fitted) Adaptor (supplied) OGI-08-4 Black moulded cover Telstra, Optus & Vodafone 4G, 3G and GSM MHz & MHz Full band <2:1 across full band Factory 2.1 dbi 5 Watts 50 Ohms Vertical 3.0 metres RG174/U bottom/side exit from antenna SMA Male FME female to SMA female Operating Temperature -20C to +60C Dimensions Weight Mounting 115mm long x 21mm wide x 7mm thick 5 grams Adhesive pad on rear of antenna Interior windscreen or rear window glass of vehicle where tint/heating elements or metallic flakes are not present. Updated 28th January 2016

108 OGI-EPH401 Telstra, Optus & Vodafone 4G, 3G & GSM Adhesive On-Glass Mobile Phone/Wireless Data Improvement The OGI-EPH401 on-glass antenna sticks to the inside of a vehicles windscreen or rear window and will improve mobile phone and/or wireless data reception while travelling. Alternative adaptors, connectors and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Wave Connector (fitted) Cable Dimensions Weight Operating Temperature Storage Temperature Mounting OGI-EPH401 Moulded ABS black cover Telstra, Optus & Vodafone 4G, 3G & GSM MHz & MHz Full band <1.5:1 across full band Factory 1.5 dbi 5 Watts 50 Ohms 360 omnidirectional 1/2 λ (wave) dipole Fakra Type D (plum/maroon) 5 metres standard exits from base of antenna 106.5mm long x 10.6mm wide x 4.5mm thick 45grams including cable -40 C to +80 C -40 C to +80 C Adhesive pad on rear of antenna Interior windscreen or rear window glass of vehicle where tint/heating elements or metallic flakes are not present. Updated 28th January 2016

109 MAG-CELL-DB Telstra 4G and 3G Magnetic Base Mobile Phone/Wireless Data Improvement The MAG-CELL-DB series of magnetic base antenna is specifically designed for use to improve reception of the Telstra 4G and 3G mobile phone and wireless data networks. With a magnetic mount base, the MAG-CELL-DB series can be easily installed and removed in situations where theft/vadalism or damage may occur. The MAG-CELL-DB is just the removable magnetic base with radiating whip attached. The MAG-CELL-DB-2 comes standard with the magnetic radiating whip base and a 2.0 metre cable assembly ready for installation. Alternative cable assemblies, adaptors, connectors and other installation accessories are all available separately. MAG-CELL-DB MAG-CELL-DB-2 MAG-CELL-DB Black plastic and nickel Black plastic and nickel VSWR Telstra 4G & 3G MHz & MHz <2:1 full band <2:1 full band Tuning Factory Factory (nominal) 3.1 dbi 3.1 dbi Maximum Power 5 Watts 5 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Connector (fitted) FME male inside magnetic base Height 135mm 135mm SMA Male fitted to end of cable MAG-CELL-DB-2 Weight 60grams 80grams As high on your vehicle or structure on any flat magnetic metal surface Specify cable assembly & connectors (order separate) 2 metre cable assembly with SMA connector fitted Updated 28th January 2016

110 MAG-M90T Series Telstra 3G or Telstra, Optus & Vodafone GSM Magnetic Base Mobile Phone/Wireless Data Improvement The MAG-M90T series of indoor detachable magnetic base antennas will enhance the reception of your mobile phone or wireless data device. The MAGM90T series are easy to set-up, easy to remove and the detachable whip makes the antenna easy to store when not required. Alternative mounting options, adaptors, connectors and other installation accessories are all available separately. MAG-M90T800 MAG-M90T900 Black stainless steel whip, moulded magnetic base, cable assembly and gold plated/tri metal plate terminations VSWR Telstra 3G MHz Telstra, Optus & Vodafone GSM MHz <1.5:1 across full band chosen MAG-M90T800 Telstra 3G Tuning Factory Factory (nominal) 5 dbi 5 dbi Maximum Power 5 Watts 5 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical Connector (fitted) Cable Assembly (supplied) Magnetic Base: FME Male Magnetic Base Cable: FME Female Cable Termination: SMA Male 5 metres RG58 low loss Height 325mm 325mm Weight 60grams 60grams Any flat magnetic metal surface MAG-M90T900 Telstra, Optus Vodafone GSM Updated 28th January 2016

111 Whips, Bases and Cable Sets Telstra 3G or Telstra, Optus & Vodafone GSM Page 1 of 2 For reception improvement of a mobile phone or wireless data device, a phased whip may be fitted to a base and then mounted in a variety of locations, either fixed position or vehicle mounted. M90T (Next G) M90T (GSM) Black stainless steel phased coil whip Telstra 3G MHz Telstra, Optus & Vodafone GSM MHz Bandwidth Full band Full band 5.1 dbi 5.1 dbi Height 300mm 250mm Mount Ferrule thread 6mm internal (female) 6mm internal (female) Antenna Compatibility Mount Ferrule thread XB Mounting Base Black moulded base (no cable) M90T (Next G) or M90T (GSM) 6mm external (male) Please see following page for more models... Updated 28th January 2016

112 Whips, Bases and Cable Sets Telstra 3G or Telstra, Optus & Vodafone GSM Page 2 of 2 Cable Connector Antenna Compatibility Mount Ferrule Thread XB4.7 Mounting Base Black moulded base with cable 4.7 metres RG58 low loss Specify when ordering M90T (Next G) or M90T (GSM) 6mm external (male) Other Models Available XB4.7-BNC XB4.7-FME XB4.7-TNC 4.7m RG58, BNC male fitted 4.7m RG58, FME female fitted 4.7m RG58, TNC male fitted Cable Connector Dimensions Antenna Compatibility Mount Ferrule Thread MGB-XB Mounting Base Black magnetic base with cable 4.7 metres RG58 low loss Specify when ordering 105mm base diameter M90T (Next G) or M90T (GSM) 6mm external (male) Updated 28th January 2016

113 The ZCG-EEH-L01 low profile antenna will improve mobile phone or wireless data device reception and transmission range. Being a water-proofed enclosed unit, the internals are weatherproofed to ensure a long service life. Ideal applications for the ZCG-EEH-L01 are: - Wireless Data communication - Wireless Monitoring/ Telemetry - Mobile Phone Network Improvement ZCG-EEH-L01 Telstra, Optus & Vodafone 4G LTE, 4G, 3G & GSM Low profile Mobile Phone/Wireless Data Improvement Mounting brackets, cable assemblies and other installation accessories are all available separately. Bandwidth VSWR Tuning Maximum Power Impedance Polarisation Connector (fitted) Operating Temperature Storage Temperature Dimensions Weight Mounting Waterproof Rating ZCG-EEH-L01 Black radome, chromed fittings Telstra, Optus and Vodafone: 4G LTE, 4G, 3G & GSM & MHz Full band <2.7:1 across full band Factory 6.0dBi ( MHz) 2.75dBi ( MHz) 5 Watts 50 Ohms Linear, Vertical N-type female bulkhead in base -40 C to +80 C -40 C to +85 C 42mm (Dia.) x 75.6mm (Height) 121grams Use suitable 16mm hole or bracket with a 16mm hole (not supplied), rubber gasket, toothed washer and hex nut (supplied) Mount as high on vehicle/structure as possible using appropriate bracket or mount hole. IP67 Updated 28th January 2016

114 CT800 and CT900 Telstra 3G or Telstra, Optus & Vodafone GSM If you require a mobile phone or wireless data network antenna which is small, inconspicuous and virtually indestructable, then the CT800 for Telstra 3G or the CT900 for Telstra, Optus & Vodafone GSM antenna will be your solution. These low profile antenna are an ideal solution where there is vulnerablity to vandalism, theft or damage. Applications suited for these antennas are: Trains Buses Forklifts Tractors Forestry Vehicles Logging Trucks Police Ambulance Fire Brigade Military Vehicles Security Services Mining Vehicles CT800 CT900 Aluminium, delrin, rubber gasket & tri-metal plated terminations Bandwidth Telstra 3G MHz Full band Telstra, Optus & Vodafone GSM MHz Full band VSWR <1.6:1 full band <1.6:1 full band Tuning Factory Factory (nominal) 2.1 dbi 2.1 dbi Maximum Power 5 Watts 5 Watts Impedance 50 Ohms 50 Ohms Polarisation Vertical Vertical E Plane Connector (fitted) Dimensions Near 360 omnidirectional Same as a normal 1/4 λ (wave) whip N-type female mounted at base of antenna 150mm long x 32mm wide x 32mm high Weight 170grams 170grams Mounting 2 x M6 bolts (not supplied) As high on your vehicle/ structure as possible, on a metal- ground plane. Updated 27th February 2017

115 CT700 UHF to MHz Low Profile Rugged Antenna The low profile and rugged CT700 UHF antenna is the ideal choice in situations where a traditional whip would be vulnerable to damage or vandalism. Typical applications suited for the CT700: Trains Buses Forklifts Tractors Forestry Vehicles Military Police Ambulance Fire Brigade Emergency Services Security Services Mining Frequency VSWR Tuning (nominal) Maximum Power Impedance Polarisation E Plane Connector (fitted) Dimensions Weight Mounting CT700 series Aluminium, delrin and rubber gasket to MHz <1.6:1 across frequency range selected Factory 2.1 dbi 5 Watts 50 Ohms Vertical Near 360 omnidirectional Same as normal 1/4 wave whip N-type female at base of antenna 170mm long x 32mm wide x 32mm high 170grams 2 x M6 bolts (Not Supplied) As high on your vehicle/ structure as possible, on a metal ground plane. H-Plane E-Plane Updated 27th of February 2017

116 GCFRA and GCT Mobile Phone/Wireless Data/WiFi and GPS Page 1 of 2 The GCT low profile all-in-one antenna will improve reception for all mobile phone/wireless data networks and GPS. The GCFRA low profile all-in-one antenna will improve mobile phone/ wireless data, GPS and WiFi reception. Adaptors and other installation accessories are all available separately. GCFRA GCT Cream ABS polycarbonate radome Cellular coverage GPS coverage MHz Telstra, Optus & Vodafone 4G, 3G & GSM MHz & MHz MHz GCT Mobile Phone & GPS WiFi coverage Yes No Tuning Factory Factory Impedance 50 Ohms 50 Ohms 360 omnidirectional Weight 280grams 280grams Height 39mm 39mm Cable 3 x 5 metre RG174/U 1 x 5 metre RG174/U 1 x 5 metre RG58/AU GCFRA Mobile Phone, GPS & WiFi Connector (fitted) 3 x SMA male 2 x SMA male Mounting Any bracket or flat surface with 20mm hole using cream ABS nut and attached rubber gasket supplied As high on your vehicle/structure as possible using a minimum 20mm hole or bracket with 20mm hole. Updated 28th January 2016

117 ZAU-3C Series GPS and Telstra 3G Low Profile Antenna For both Automatic Vehicle Location (AVL) systems and mobile phone reception improvement, the ZAU series deliver a highly sensitive multiband solution for fleet management. Alternative mounting, adaptors, connectors and other installation accessories are all available separately. GPS Mobile Phone Black plastic radome, chrome mounting base Bandwidth MHz 10MHz Telstra 3G MHz Full band 27 db typical 1.0 dbi Polarisation Right-hand circular N/A Noise Figure 1.8 maximum N/A Attenuation 20 db FO ± 50MHz N/A VSWR <1.5:1 across bandwidth <1.5:1 full band Impedance 50 Ohms 50 Ohms Power Supply Connector (fitted) Power consumption Volts DC/ 13 ma SMA male Power handling capacity 10 Watts FME female Dimensions 64.5mm diameter x 14mm high Operating Temperature -40 C to +85 C -40 C to +85 C Storage Temperature -45 C to +100 C -45 C to +100 C (order Seperate) Model Order Codes ZAU-3C2M-GC ZAU-3C3M-GC ZAU-3C5M-GC Bullbar: BBM-SS, BBML-SS or BBMXL-SS Truck Mirror: MRM-SS Bracket Mounting: GM1, GM2, GM4, GM6 As high on your vehicle as possible using a minimum 13mm hole or appropriate bracket with a 13mm hole Details 2 x 2 metres RG174 (bottom exit) 2 x 3 metres RG174 (bottom exit) 2 x 5 metres RG174 (bottom exit) Updated 28th January 2016

118 ZAU-3S Series GPS, GPRS and Telstra 4G & 3G Low Profile Antenna For Automatic Vehicle Location (AVL) systems, GPRS (General packet radio service) packet orientation data service and mobile phone reception improvement, the ZAU-3S series deliver a highly sensitive multiband solution for fleet management. Alternative mounting, adaptors, connectors and other installation accessories are all available separately. GPS/GPRS Mobile Phone Black plastic radome, chrome mounting base Bandwidth MHz N/A Telstra 4G & 3G MHz & MHz Full band 26 db typical 1.0 dbi Polarisation Right-hand circular N/A Noise Figure 1.2 maximum N/A Attenuation 20 db FO ± 50MHz N/A VSWR <1.5:1 across bandwidth <1.5:1 full band Impedance 50 Ohms 50 Ohms Power Supply Connector (fitted) Power consumption Volts DC/ 13 ma FME female Power handling 10W maximum SMA Male (Gold Plated) Dimensions 64.5mm diameter x 13.6mm high Operating Temperature -40 C to +85 C -40 C to +85 C Storage Temperature -45 C to +100 C -45 C to +100 C Mounting Model Order Codes ZAU-3S5M-GC ZAU-3S7M-GC Onto any flat magnetic metal surface using magnetic base As high on your vehicle/structure as possible using any magnetic metal surface. Details 2 x 5 metres RG174 (bottom exit) 2 x 7 metres RG174 (bottom exit) Updated 28th January 2016

119 ZAU-9-LTE GPS, Cellular and WiFi Low Profile Antenna The ZAU-9-LTE low profile antenna is Ideal for Mobile Phones,GPS and WI-FI applications. Used by many companies for tracking and data aquisition. Can be modified with any length of cable and cable type. GPS LTE WLAN Black plastic radome, chrome mounting base and rubber gasket MHz (L1 Band)1602MHz (GLO- NASS) 704~ 960MHz MHz MHz MHz Bandwidth S11< -10dB 256MHz: 704MHz~ 960MHz, 960MHz: 1710MHz~2690MHz 100MHz: 2400~2500MHz, 750MHz: 5100~5850MHz 27 3V ~2500MHz, 5100 ~5850 MHz Polarisation Right-hand circular (RHCP) Linear, Verticle Linear, Verticle Noise Figure 1.2 maximum N/A N/A Attenuation 20 db FO ± 50MHz N/A N/A VSWR <1.5 <2.4 <1.7 Impedance 50 Ohm 50 Ohm 50 Ohm Power Supply 3.0~ 5.5volt DC Consumption~ 6.1~13mA - Power Handling- 10w Connector RG174/SMA RG-58 SMA (SP) or other standard SMA or other standard con- nectors Dimensions 85mm diameter x 41.5mm high Operating Tem- perature Storage Tem- perature -40 C to +80 C -40 C to +80 C -40 C to +80 C -40 C to +85 C -45 C to +85 C -40 C to +85 C Updated 18th August 2016

120 ZAW-9-LTE GPS, Cellular and WiFi Low Profile Antenna The ZAW-9LTE is designed and manufactured with both GPS, LTE and WLAN antennas inside one low profi le radome for AVL or fl eet management applications. The ZAW-9LTE incorporates an internal state-of-the-art low noise amplifi er for the GPS patch antenna. Power Consumption is 6.1~13mA GPS LTE WLAN Black plastic radome, chrome mounting base and rubber gasket MHz (L1 Band) 704~ 960MHz MHz MHz MHz Bandwidth S11< -10dB 256MHz: 704MHz~ 960MHz, 960MHz: 1710MHz~2690MHz 100MHz: 2400~2500MHz, 750MHz: 5100~5850MHz 27 3V ~2500MHz, 5100 ~5850 MHz Polarisation Right-hand circular (RHCP) Linear, Verticle Linear, Verticle Noise Figure 1.2 maximum N/A N/A Attenuation 20 db FO ± 50MHz N/A N/A VSWR <1.5 <2.4 <1.7 Impedance 50 Ohm 50 Ohm 50 Ohm Power Supply 3.0~ 5.5volt DC Consumption~ 6.1~13mA - Power Handling- 10w Connector Non Terminated Non Terminated Non Terminated Dimensions 85mm diameter x 41.5mm high Operating Tempera- ture Storage Tempera- ture -40 C to +80 C -40 C to +85 C -40 C to +80 C -40 C to +85 C -45 C to +85 C -40 C to +85 C Updated 18th August 2016