Tools Single Unit Introduction. Fiber Checker Fiber Meter Light Source

Transcription

1 Tools Single Unit Introduction Fiber Checker Fiber Meter Light Source

2 Fiber Checker Easy to check fiber faults by using 650 nm visual red laser Range: visibility up to 3 ~ 5 Km Universally Connector for test different ST/ SC/ FC, LC ( via Optional Adapter ) interfaces For both Singlemode and Multimode cables Highly effective power circuits designed for stable laser power Operating in both CW ( Continuous Wave) & Pulse Mode Dust-proof design keeps fiber connectors clean LED indicator for Power On, Battery Low

3 Operating Instructions 1. Dust Cap : prevent dirt contaminates the LD 2. Button : pressing to Turn On / Turn Off the LD emitting 3. Mode Switch : to select CW Continuous Wave Mode / Pulse Mode. 4. Pen Clip : a design to fasten the tool while put inside pocket 5. Battery Lid : to open to change batteries To touch then bend the Dust Cap to open the connector two pieces 1.5 V AAA batteries 6. Linchpin : a mechanical design to lock the Battery Lid To press to release Linchpin then to push Battery Lid backward To open Battery Lid to change batteries

4 Operating Instructions It emits a visible 650 nm wavelength red laser light through fiber optic cables There are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area.

5 Fiber Meter Robust & handy design with LED digits reading. Easy to check Multimode 850 nm / 1300 nm output power. Easy to check Singlemode 1310 nm / 1490 nm / 1550 nm output power. Universal 2.5 mm to 1.25 mm adaptor for SC / ST / FC to LC ( via Optional Adapter ) 2 Digits resolution and Low Voltage Battery warning LED display Measuring power in Multimode 850 nm / 1300 nm within -40 dbm ~ +5 dbm ranges Measuring power in 3 Digits resolution and Low Voltage Battery warning LED display Measuring power in Singlemode 1310 nm / 1490 nm / 1550 nm within -40 dbm ~ +5 dbm ranges.

6 Operating Instructions 1. Dust Cap : to prevent dirt contaminates the PD 2. Switch : Wavelength choosing switch 3. LED : figures shown input power indicator dbm and Lower Power 4. Button : pressing to Turn On / Turn Off the Meter 5. Pen Clip : a design to fasten the tool while put inside pocket 6. Battery Lid : to open to change batteries 7. Linchpin : a mechanical design to lock the Battery Lid To touch / bend the Dust Cap to open the connector two pieces 1.5 V AAA batteries To press to release Linchpin then to push Battery Lid backward. To open Battery Lid to change batteries

7 Light Source Interchangeable SFP Module design with LC or SC connector Flexible to change any wavelength High stability of the Output Power Excellent & stable output wavelength Excellent re-connection repeatability Low Voltage Battery warning signal in LED. Compatible to LC Connectors Operates in CW ( Continuous Wave) or Pulse Mode 270 Hz / 2 KHz The dust-proof design keeps fiber connectors clean LED indicator for Power, Battery Low indicators Plug-in module

8 Operating Instructions 1. Dust Cap : prevent dirt contaminates the LD. 2. SFP Module : Interchangeable single LC or SC connector hot swap SFP module for identical wavelength. 3. LED Indicator : Power On and In Operation indicator ( GREEN ) and Battery Low Warning indicator ( RED). 4. Button : pressing to Turn On / Turn Off the LD emitting. 5. Mode Switch : to select CW Continuous Wave Mode / Pulse Mode 270 Hz / 2 KHz Switch. To press to release Linchpin then to push Battery Lid backward To open Battery Lid to change batteries 6. Pen Clip : a design to fasten the tool while put inside pocket. 7. Battery Lid : to open to change batteries. 8. Linchpin: a mechanical design to lock the Battery Lid.

9 Operating Instructions Light Source Modules Plug in Light Source Main Frame Light Source Connect to Fiber Meter Fiber Meter Connect to media converter RP-MF2312 Fiber Meter shown input fiber cable wavelengths dbm shown input power indicator dbm LC or SC connector RP-MF1200 Light Source The TheLight LightSource Sourceis isaahandy handy instrument instrumentto toprovide provideyou you several severaldifferent differentwavelengths wavelengths of oflight lightsources sources RP-MF2312 Fiber Meter The TheFiber FiberMeter Meteris ismeasures measuresthe the average averagepower powerof ofaacontinuous continuous light lightbeam beamwhich whichemits emitsfrom fromthe the equipments or other optic equipments or other opticsources. sources. RP-G130SC10 Media converter

10 For more information, please visit Liverage website Or to