Taoglas is an international company with a 100% positive approach and a world-class way of doing things. We listen, we learn, we respond.

Transcription

1

2 Contents About Taoglas What Taoglas can offer you? GPS Patch Antennas Surface Mount GPS Antennas Active GPS antenna modules GPS Antenna Solutions External On Board Cellular Antenna Solutions (SMT) Embedded Cellular Antenna Solutions ( Cable & Connector) Embedded Flexible Circuit Cellular (with Cable & Connector) Cellular External (Terminal Mount) Cellular External with Cable and Connector Combination M2M Antennas External Combination GPS/Cellular/Wi-Fi Antennas - Spartan Combination GPS/Cellular/Wi-Fi Antennas Pantheon Wide-Band Ceiling Mount Antenna 700MHz to 6.0GHz ISM External Terminal Range ISM Embedded Flexible Circuit (with Cable & Connector) ISM Embedded ISM External Screw Mount Antennas 2.4GHz Antenna Solutions Embedded 2.4GHz Antenna Solutions Embedded (Cable & Connector) GHz/ GHz Dual Band Flexible Circuit Antennas(Cable & Connector) 2.4GHz/5GHz External (Terminal Mount) 2.4Ghz/5Ghz Antenna Solutions External WiMAX Antenna Solutions LTE Antenna Solutions Cable Assembly Solutions Taoglas Limited reserves all rights to this document and the information contained herein. Products, names, logos, images and designs described may in whole or in part be subject to intellectual property rights. Data shown in this document are estimates only and do not constitute a warranty of guarantee of product performance or services. No warranty of any kind, either expressed or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by Taoglas Limited at any time. For most recent information please check product data on our website: Info@taoglas.com

3 About Taoglas Our Company Taoglas - Pioneers with a positive approach Taoglas is an international company with a 100% positive approach and a world-class way of doing things. We listen, we learn, we respond. Since our foundation in 2004, we've combined forward-focused technological thinking with a determination to understand and respond to the real needs of our customers. Our cross-cultural business-solutions approach means research, design and customer support services are based at our world-class technology centres in Ireland, the US and Taiwan. Today, Taoglas provides a comprehensive range of external, embedded and base station antenna solutions for M2M applications such as Telematics/Automotive, Smart-Grid, Metering/Telemetry, Home Automation, Remote Monitoring and Medical applications. We are committed to continually researching new materials and improved antenna designs. Our surface-mount antenna range and flexible embedded products are unique in the industry. Taoglas works with you to enable your company achieve the best possible performance from your wireless devices. We can custom-design to suit your individual needs or provide highly-economical off-the-shelf solutions. Our step-by-step design process ensures your Taoglas devices achieve target specifications and comply with all required approvals so they're 'right first time'. If you're looking for a pioneering approach to problem-solving, talk to us at Taoglas. In the field of M2M, we outperform the rest. 'Taoglas shows a real willingness to solve problems I value this' Client Comment Our Market Our customers deliver innovation and value into; Supply chain / Logistics (delivery routes, vehicle diagnostics, accident prevention) examples are fleet management companies Healthcare (Monitoring at home, equipment tracking, hospital system equipment inventory management) Medical Device companies Smart grid (Wireless utility meter reading and remote power management) Automotive (Vehicle Tracking, Connected Navigation, Ecall, Internet, Telematics) Retail (POS systems, inventory tracking) handheld card payment system Industrial (Sensors, Oil exploration, field communications) Security (Alarms, tracking, remote monitoring) 01 Info@taoglas.com

4 Our products and services We work with the top innovators in M2M that are tasked to deliver smaller and/or better performing systems for wireless applications As well as a wide range of off the shelf antenna solutions (embedded and external) Taoglas has grown with the market and now offers a suite of related services; Antenna optimization \tuning Custom Antenna Design Device layout optimization Noise Debug PTCRB Pre-test OTA TRP/TIS Optimization to pass AT&T, Sprint, and any network requirements First Tier Automotive approved antennas produced at TS16949 facility using PPAP and IMDS What can Taoglas offer you? The Taoglas Advantage 1. Materials We are not committed to one material technology. We use a wide variety of materials and are constantly researching the latest developments. We ship antennas made from high grade Ceramics, FR4, Metal, Fiberglass, PTFE, Mylar and flexible PCB. 2. Surface Mount Technology Taoglas are the worldwide leaders of high performance surface mounted antenna solutions for M2M with unique (patent pending) products for cellular, GPS, Wi-Fi and other ISM band antennas. These products are delivered on tape and reel and connect to our customers devices during the standard reflow process. We are the first in the market to provide automotive approved SMT GPS patch antenna products and also a very unique multiband cellular PA25a antenna that achieves high performance off the shelf in a small area. 3. Antenna Design Techniques We select the antenna design that is right for the individual project, application or market; PIFA antennas, Monopoles, Dipoles, Loop Antennas etc. We are not limited by design methodology and we use software and practical tried and tested procedures to deliver the most effective and efficient antenna. This means we are also not limited by antenna frequency we have the ability to deliver all antennas for the project. For the device itself you may need to have multiple antenna types GPS, multiband cellular, diversity, Wi-Fi, Bluetooth, RFID etc. It is best to have one antenna company provide all the antennas because it cuts development time by half while also availing of bulk buying discounts. We can design and deliver an antenna at any frequency and we have a huge amount of experience in being challenged to design with small spaces and high target specifications. This means we can work to provide the full antenna solution for a wireless network base station antennas, device antennas and remote antennas for the hard to reach connections. Info@taoglas.com 02

5 4. M2M Focused Taoglas employees have built up years of practical international experience in different markets, and have worked on thousands of custom M2M devices. Simply put, we know what designs work and what do not. We also stay close to M2M module developments and tradeshows so we can keep our product line as close as possible to ever changing market demands. We work with the leading certified test labs so we are fully aware of wireless device approvals and test methods. 5. The Taoglas promise Taoglas antennas are tested in the industry's most advanced CTIA approved test chambers, the very same ones that the world's automobile, mobile phone and notebook companies use to qualify the RF performance of their antennas. Unlike other antenna companies we show the real test results and conditions they were tested in. Antenna performance will change if any parameter of the antenna or environment is changed. For omni-directional antennas the average gain over 360 degrees, also known as efficiency, is the only proper indicator of antenna performance. A single peak gain figure used by most of our competitors are not indicative of real performance for omni-directional antennas as they only give the gain at one particular angle or plane and mounting condition for one frequency point only. You will often see antennas with peak gain of 2dBi listed, however this is largely meaningless as the average gain will be much lower, and it is average gain that influences the power and sensitivity of your product, not the peak gain. In contrast Taoglas antenna specifications show average gain, efficiency and peak gain across the whole frequency band. Changing a cable type, length, will also change the gain of any antenna. We are committed to being honest and open in our specifications. It is recommended never to rely on an antenna specification as a guarantee of antenna performance. It is advised to try different antennas in real life test conditions, or ask a Taoglas representative and we will gladly test our antenna with your product and compare to a competitor's antenna in your product to get the real test results. 6. Your TOTAL antenna and RF solution for wireless Please contact us today to discuss your wireless communication requirements or see how we can help you be more competitive in your market. Avail of our test and design service packages at our fully qualified OTA test facilities in Wexford, Ireland and San Diego, USA. Director Dermot O'Shea in the Taoglas ETS 12M 400MHz to 6GHz 3d OTA Test Chamber, Ireland 03 Info@taoglas.com

6 Ireland Unit 7 Peare Campus, Old Dublin Road, Enniscorthy, Co. Wexford, Ireland Phone: Fax: eusales@taoglas.com Taiwan No 25, Changchun 6th Rd, Zhongli City, Taoyuan County, 320, Taiwan, ROC Phone: Fax: asiasales@taoglas.com USA 8375 Camino Sante Fe Suite A San Diego, CA Phone: East Coast Phone: West Coast nasales@taoglas.com Mexico Calle Principal 1312, Col. Rinconada 1, Tijuana BC, 22457, Mexico Phone: mxsales@taoglas.com Visit our Website: Contact us: info@taoglas.com Feel free to contact our co-founders and Joint Managing Directors directly anytime. Dermot O'Shea doshea@taoglas.com Ronan Quinlan rquinlan@taoglas.com Info@taoglas.com 04

7 GPS Patch Antennas GPS Ceramic Passive Patch Range GPS Patch Antenna Technology has been proved across industry to be the best antenna technology for receiving GPS signals. This is because they offer high gain, a narrow bandwidth and can be right hand circularly polarized thus matching the characteristics of the actual signal itself. Taoglas does not recommend any other technology for GPS antennas (unless it is an AGPS application), the larger the GPS patch antenna the better the gain. Active antennas should always be used at 15mm size, or below, for any standalone GPS applications. Transportation, Defence, Marine, Agriculture and Navigation applications globally choose patch antenna technology for reliable and accurate GPS performance. GP.12D GP.15A GP.18D GP.18E GP.25A GP.25B GP.35 Model No GP.12D GP.15A GP.18D GP.18E GP.25A GP.25B GP.35A Centre Freq. Bandwidth Return Loss VSWR Peak Gain Mechanical Data 1575MHz 6Mhz min 1.5 Max. -0.5dBic typ. 1575MHz 6MHz min 1.5 Max. 1.0dBic typ. 1575MHz 8Mhz min 1.5 Max. 2.5dBic typ. 1575MHz 5Mhz min 1.5 Max. -0.5dBic typ. 1575MHz 10MHz 1.5 Max. 3.5dBic typ. 1575MHz 5MHz 1.5 Max. 2.0dBic typ. 1575MHz 22MHz 1.5 Max. 2.0dBic typ. GP Size mm 2 66*52.5mm mm 2 mm 2 mm 2 35mm 2 mm 2 Patch Dims. 12*12*4mm 15*15*4mm 18*18*4mm 18*18*2mm 25*25*4mm 25*25*2mm 35*35*3.5mm Operating Temp. Mounting 40 C +85 C Pin 3M Tape mm 0.05mm thick mm 0.05mm thick mm 0.12mm thick mm 0.12mm thick mm 0.12mm thick mm 0.12mm thick mm 0.12mm thick Note: Please see our SGP series for surface mounted solutions. Note: Centre frequencies can be shifted depending on ground-plane size, shape and surrounding device. The aim is to have the antenna receiving at 1575MHz when it is on the PCB. Tuning services are available if the off the shelf parts do not retain centre frequency inside the GPS device, tuning services are subject to MOQ's and/or NRE. 05 Please see :- for full data-sheets.

8 Surface Mount GPS Antennas Surface Mount GPS Range Taoglas unique patented SMT (Surface Mount Technology) GPS patches and Loop Antennas are designed to meet the requirements of high volume applications that need to avoid manual assembly processes. They are unique because the environmental requirements of the automotive industry (temperature, shock, vibration etc) are met with this product. GPS Patch antenna technology has been proved across industry, to be the best antenna technology for receiving GPS signals. This is because they offer high gain, a narrow bandwidth and can be right hand circularly polarized thus matching the characteristics of the actual signal itself. The antennas are delivered on tape and reel and mounted directly onto the PCB via large mounting pads underneath. Connection is made during the standard reflow process and there is a pad present for soldering to the feed line. The GLA series of GPS Loop Antennas are miniature edge mounted antennas, designed for small space requirements. The GLA loop antenna series show at least three times the efficiency of traditional linear polarized 1575 MHz antennas. Efficiencies of 40% to 90% are achievable. They are delivered on tape and reel and allowing M2M customers to use an -directional antenna in devices where orientation of the product is unknown. SGP.12A SGP.15A SGP.18C SGP.25C GLA.01 GLA.02 Model No SGP.12A SGP.15A SGP.18C SGP.25C GLA.01 GLA.02 Centre Frequency Bandwidth Return Loss VSWR Gain at Zenith Mechanical Data Ground Plane Size Operating Temp. 1575MHz 6Mhz min 1.5 Max. -2.0dBic typ. 35mm 2 12*12*4.5mm 1575MHz 6MHz min 1.5 Max. 1.0dBic typ. 45mm 2 15*15*4.5mm 1575MHz 5MHz min 1.5 Max. 1.0dBic typ. 45mm 2 18*18*4.5mm 1575MHz 5MHz 1.5 Max. 2.0dBic typ. 45mm 2 25*25*4.5mm 1575MHz MHz 2.0 Max 2.5dBi typ. 80*40mm 5*3*0.6mm 1575MHz 20MHz 2.0 Max. 1.34dBi typ. 80*40mm 10*3.2*4mm Note: Centre frequencies can be shifted depending on ground-plane size. The aim is to have the antenna receiving at 1575MHz when it is on the PCB. Tuning services are available if the off the shelf parts do not retain centre frequency inside the GPS device, tuning services are subject to MOQ's and/or NRE. *these antennas come on Tape and Reel Please see :- for full data-sheets. 06

9 Active GPS antenna modules Embedded GPS Active Antenna Modules Active GPS Patch Antenna Modules offer the best possible GPS performance for any device that needs to use internal antennas. They connect directly to your GPS module via a cable and connector, or in some cases can be soldered directly onto the edge of your board. Active antenna patches are already tuned for their own ground plane and LNA and have integrated filters, meaning that they are more resistant to the detuning effects of surrounding components and different device ground planes, they are also much more resistant to device noise than passive antennas, allowing in most cases immediate device integration. Active antenna products simplify design and deliver the extra sensitivity required for accurate and reliable GPS performance. Active antennas deliver the shortest cold start time and best accuracy when compared to any other internal GPS antenna. They are available in 1 stage, 2 stage and sometimes 3 stage high gain LNA configurations, see the AP.25J below. Experienced customers often prefer a high gain LNA due to its ability to deliver superior GPS locking in difficult environments. AP.10C/D SMD antennas are unique patented antenna technologies from Taoglas. AP.10C/D AP.10A/B AP.17A AP.17B AP.25J Model No Patch Frequency LNA Gain Peak Gain Out. Output VSWR Op. Temp. Rel. Humidity Input Voltage Current(3V) Mounting Data Cable* Connector* AP.10C 1 Stage 15dB MHz 12 4dBic@90-3dBic@Zenith Max % 95% Min 2.7V Typ. 3.0V Max 3.3V Typ.3mA 10*10*11.5mm SMT Version SMT Version AP.10D 2 Stage 25dB MHz 22 4dBic@90-3dBic@Zenith Max C +8 5 C 40% 95% Min 2.7V Typ. 3.0V Max 3.3V Typ.10mA 10*10*11.5mm SMT Version SMT Version AP.10A 1 Stage 15dB MHz 12 4dBic@90-3dBic@Zenith Max C +8 5 C 40% 95% Min 2.7V Typ. 3.0V Max 3.3V Typ.3mA 10*10*6mm 0.81 mm IPEX (U.FL) AP.10B 2 Stage 25dB MHz 22 4dBic@90-3dBic@Zenith Max C +8 5 C 40% 95% Min 2.7V Typ. 3.0V Max 3.3V Typ.10mA 10*10*6mm 0.81 mm IPEX (U.FL) AP.17A 1 Stage 15dB MHz 15 3dBic@90 1dBic@Zenith Max C +6 5 C 40% 95% Typ. 3.0V Typ 12mA 17*17*6.3mm mm IPEX (U.FL) AP.17B 2 Stage 25dB MHz 26 4dBic@90 1dBic@Zenith Max C +8 5 C 40% 95% Min 3.0V Typ. 3.0V Max 3.3V Typ 3.2mA 17*17*6.3mm mm IPEX (U.FL) AP.25J 3 Stage 38dB MHz 44 3dBic@90 4dBic@Zenith Max % 95% Min 1.8V Typ. 3.0V Max 5.0V Typ 10mA 25*25*8mm RG M *Cable and Connectors are customizable. 07 Please see :- for full data-sheets.

10 Active GPS Antenna Modules(ctd) Embedded GPS Active Antenna Modules Active GPS Patch Antenna Modules offer the best possible GPS performance for any device that needs to use internal antennas. They connect directly to your GPS module via a cable and connector, or in some cases can be soldered directly onto the edge of your board. Active antenna patches are already tuned for their own ground plane and LNA and have integrated filters, meaning that they are more resistant to the detuning effects of surrounding components and different device ground planes, they are also much more resistant to device noise than passive antennas, allowing in most cases immediate device integration. Active antenna products simplify design and deliver the extra sensitivity required for accurate and reliable GPS performance. Active antennas deliver the shortest cold start time and best accuracy when compared to any other internal GPS antenna. They are available in 1 stage, 2 stage and sometimes 3 stage high gain LNA configurations. Experienced customers often prefer a high gain LNA due to its ability to deliver superior GPS locking in difficult environments. We have a new active loop antenna for GPS; ALA.01 is best suited for applications where omni-directionality is important. The average gain is similar to an 18mm active patch antenna but in a much narrower profile. Also new the AP.35E is the most sensitive off-the-shelf GPS antenna in the M2M/Telematics market. The antennas listed here have front End SAW Filters; this offers better protection from nearby radiated power surges, and the SAW Filter also reduces the radiated spurious emissions in devices. AP.12F AP.25E AP.25F AP.35E ALA.01 Model No Patch Frequency LNA Gain(3.0V) Antenna Gain Axial Ratio Noise Figure Out Output VSWR Op. Temp. Rel. Humidity Input Voltage Current(3.0V) Mounting Data Cable* Connector* AP.12F 2 Stage 25dB Front End SAW Filter MHz dBic@90-1.5dBic@Zenith 4dB Max@Zenith 2.6dB Max. Max % 95% Min 1.8V Typ. 3.0V Max 5.5V Typ.9mA 13.4*13.4*5.6mm mm IPEX (U.FL) AP.25E 1 Stage 15dB Front End SAW Filter MHz dBic@ dBic@Zenith 3dB Max@Zenith 2.5dB Max Max % 95% Min. 1.8V Typ. 3.0V Max. 5.5V Typ.3mA 35*35*4.5mm mm IPEX (U.FL) AP.25F 2 Stage 28dB Front End SAW Filter MHz dBic@ dBic@Zenith 3dB Max@Zenith 3.7dB Max Max % 95% Min 1.8V Typ. 3.0V Max 5.5V Typ.12mA 25*25*8mm mm IPEX (U.FL) AP.35E 1 Stage 15dB Front End SAW Filter MHz dBic@ dBic@Zenith 3dB Max@Zenith 2.5dB Max Max % 95% Min. 1.8V Typ. 3.0V Max. 5.5V Typ. 3mA 35*35*5.5mm mm IPEX (U.FL) ALA.01 1 Stage 16dB Front End SAW Filter mhz 16 4dBi@90 3.1dBi Typ. 1.3dB Max Max % 95% Min. 2.7V Typ. 3.0V Max. 3.3V Typ. 13mA 45*10*2.3mm mm IPEX (U.FL) *Cable and Connectors are customizable. Please see :- for full data-sheets. 08

11 GPS Antenna Solutions External GPS External Antenna Range External antennas deliver the best possible performance for any product or device. This range is ideal for high performance, robust, covert installations where durability is paramount. Magnetic, adhesive and screw mount options are available. Where the communication unit is placed in an area of no, or poor, GPS signal, an external antenna is the obvious choice. The Titan AA.108 is a first tier automotive approved IP67 antenna which has gone through stringent PPAP certification and is a certified shipping part already qualified in the global automotive IMDS database system. The advantage of the Taoglas solution is the antenna inside is designed by Taoglas GPS antenna engineers and is tuned and customized for its housing and M2M applications, giving the antenna maximum sensitivity. The axial ratio is carefully optimized in our unique test chambers to reduce multi-path effects and therefore get a higher C/N ratio on your system. The antenna range was designed based on market feedback - small, waterproof, high gain, durable. All external antennas are available with the cable and connector required to connect directly to your device. These choices include low loss and special type cables e.g. CFD200.. They are available in 1 stage, 2 stage and 3 stage high gain LNA configurations. Experienced customers often prefer a high gain LNA due to its ability to deliver superior GPS locking in difficult environments. Titan-AA.105 Titan-AA.108 AA.109 AA.160 GPS/GLONASS Hercules-A.01.C/A.03B Model No Centre Frequency Gain Noise Figure VSWR Axial ratio Input Voltage Power Consumption Mechanical Data Mounting Operating Temp. Cable* Connector* IP Rating AA.105 Titan Magnetic Mount MHz 30dBic 2 1.5dB Max 1.92 Max. 3.0dB Max mA 44*33*14mm Magnetic RG-174 IP67 AA.108 Titan Adhesive Mount MHz 30dBic 2 1.5dB Max 1.92 Max. 3.0dB Max mA 44*33*14mm 3M Tape RG-174 IP67 AA Stage LNA Magnetic Mount MHz 20dBic 2 1.3dB Max 2.0 Max. 1.0dB Max 2.4 7mA 16mA Max. H:15mm O45mm Magnetic RG-174 *Cable and Connectors are Customizable, Standard Length is 3M please contact us at info@taoglas.com ** A.03 is a Three Stage version of Hercules for longer cable lengths of >5M See also our combination antenna section for solutions of the above with Cellular or Wi-Fi. IP67 AA.160 Magnetic Mount MHz 35dBic Typ. 1.5dB Max. 2.0 Max V - 30mA Typ. 61*63*17mm Magnetic RG-174 IP65 A.01.C Hercules Screw Mount MHz 30dBic typ. (@3V) 3.0dB Max (@3V) 2.0 Max. 3.0dB Max 1.8 6mA 12mA 30mA Max. H:29mm 52mm Thread 18mm RG-174 IP69K A.03.B** Hercules Screw Mount MHz 40dBic 2 1.5dB Max 2.0 Max. 3.0dB Max 1.8 8mA 10mA 12mA Max. H:29mm 52mm Thread 18mm 10M RG-174 IP69K 09 Please see :- for full data-sheets.

12 On board Cellular Antenna Solutions (SMT) Embedded Cellular SMT Mount Range Taoglas' unique ceramic multiband cellular antennas use high grade ceramics which have been developed through years of expertise in delivering the right materials for high performance antennas. The patent pending PA.700 2G/2G/4G 700MHz to 960MHz, 1710 to 2200MHz high efficiency antenna is the latest SMT solution. These antennas have wide bandwidths even a small area, while also achieving high efficiency and awesome TRP/TIS result due to very little transmission losses. These ceramic antennas are dense and robust and pass drop tests easily; they pass 20G automotive vibration testing and are used worldwide by large global vehicle brands. The benefits for production are also clear as they are delivered on tape and reel, and soldered onto the board during the reflow process. This gives you automated assembly, robustness and uniform performance from every device. Easily add one of our switch connectors to your board so you can have the option of an external antenna connection to allow you to use one device anywhere. PA.22a PA.25a Model No Working Frequency VSWR Return Loss Efficiency Mechanical Data Ground Plane Size Operating Temp. Termination PA.22A Tri-Band Cellular 880~960MHz 1710~1990MHz 2.5 Max*. -10dB 30% average. 35*115mm 29.8*6*5mm Ag (Pb Free) PA.25A Hexa-Band Cellular 824~960MHz 1700~2170MHz 3.1 Max.* -10dB % average. 40*95mm 35*6*5mm Ag (Pb Free) *VSWR depends on the environment Soon to be launched a SMT Flexible Cellular Antenna Cellular SMT Mount Metal PIFA Range Our custom metal stamp PIFA and monopole antenna range offers the highest efficiency for small form factor applications where ground is small or where there is no room for a ceramic solution. These antennas are 100% customised for each design so will suit high volume or critical applications. Example of a Metal Stamp Solution Please see :- for full data-sheets. 10

13 Embedded Cellular Antenna Solutions (Cable & Connector) PC Series - Rigid Cellular Antennas with Cable and Connector Taoglas is the M2M market leader for embedded cellular antenna solutions. The products from this PC range are used for M2M modules that come with a connector - or where there is no space on the device PCB for a cellular antenna. They come in a range of shapes, sizes and materials (FR4/Flex Circuit). Cable and connector are fully customizable; IPEX MHF (U.FL compatible) and MMCX are standard. The antennas can be fixed into plastic slots in a device plastic housing, or backing adhesive can be supplied for affixing to the device plastic housing or holes made in the antenna for screw-fixing. The PC series are ground-plane independent antennas which save on space, making them suitable for even smaller sized M2M devices in tracking, navigation, automotive and telemedical markets. Ground is designed into the antenna. Custom antennas can be designed and tuned for devices. PC27 PC30 PA.24 Model No PC27 Quad-Band PC30 Penta-Band PA. 24 Tri-Band Working Frequency Radiation Pattern Return Loss Efficiency Mechanical Data 8/900/ 1800/1900MHz -8 avg. 25% avg. 8/900/1800 /1900/2100MHz -4avg. % avg. 900/1800 /1900MHz -10 avg. % avg. Operating Temp. Cable (Std)* Connector (Std)* Material 34*7*0.8mm 100mm 1.13 IPEX U.FL comp FR4 75*8*0.8mm 100mm 1.13 IPEX U.FL comp FR4 35*15*7mm 100mm 1.13 IPEX U.FL comp Ceramic AG (Pb Free) *Cables and Connectors are Customizable 11 Please see :- for full data-sheets.

14 Embedded Flexible Circuit Cellular (with Cable & Connector) Cellular Flexible Antenna Range with Cable and Connector Taoglas uniquely supplies flexible circuit antenna solutions for the M2M market. Flexible circuit antennas have been used in many modern mobile phone antenna designs. The material performs very well at higher frequencies like GSM and 3G etc. The products from this range are used for M2M modules that come with a connector - or where there is no space on the device PCB for a cellular antenna. The antenna can be stuck directly to the device housing by pulling off the 3M label and using the automotive grade 3M glue that is on one side of the antenna. Despite the extremely thin material the antennas are very robust and pass the required device temperature and vibration / shock tests. They come in a range of shapes, sizes and materials (FR4/Flex Circuit). Cable and connector are fully customizable; IPEX MHF (U.FL compatible) and MMCX are standard. The FXP.14 is a ground-plane independent antenna which saves on space, making it suitable for even smaller sized M2M devices in tracking, navigation, automotive and telemedical markets. The ground is designed into the antenna. FXP07 FXP14 FLA.01 Model No FXP07 FXP14 FLA.01 Penta-Band Hepta-Band Penta-Band 1575MHz GPS Loop Antenna Working Frequency 8/900/1800 8/900/1700/ 8/900/1800 /1900/2100MHz 1800/1900/2100 Mhz /1900/2100MHz MHz GPS Peak Gain Return Loss Efficiency -9 avg. 30% w/ GND 3dBi -9 avg. % -9 av g. 30% w/gnd 30% without GND Mechanical Data Operating Temp. Cable (Std)* Connector (Std)* Material Adhesive Tape 41*24*0.1mm 100mm 1.13 IPEX U.FL comp Flex Circuit 3M *20*0.1mm 100mm 1.13 IPEX U.FL comp Flex Circuit 3M *37*0.8mm 45mm 1.13 IPEX U.FL comp Flex Circuit 3M 467 *Cables and Connectors are Customizable Please see :- for full data-sheets. 12

15 Cellular External (Terminal Mount) Cellular Range Terminal (Connector) Mount Antennas Terminal Antennas are the best choice for external cellular as they eliminate cable loss and different performances associated with antennas supplied with cables. They are designed for simple screw on SMA connection to cellular terminals and cellular equipment. All common cellular bands worldwide are covered, CDMA- GSM-DCS-PCS-UMTS-WCDMA-GPRS-EDGE-HSPA (8/900/1700/1800/1900/2100MHz). There are fixed 90 degree, fixed straight connector and hinged versions available. The Taoglas solutions incorporate a carefully designed and optimized robust solution for these products. The antenna inside is optimized and tuned for its housing and connector, giving your device maximum sensitivity. TG.22 TG.09 Available in black and white Model No TG.22 (Straight) Penta-Band Cellular Terminal Antenna TG.22 (R/A) Penta-Band Cellular Terminal Antenna TG.09 Penta-Band Cellular Terminal Antenna Working Frequency Radiation Pattern Return Loss Efficiency Mechanical Data 8/900/1800 /1900/2100MHz -Directional -7.8dB avg. 17% (Ground-plane dependent) 8/900/1800 /1900/2100MHz -Directional -8.5dB average. 27% (Ground-plane dependent) 8/900/1800 /1900/2100MHz -Directional -7.8dB av g. 60% (on edge PCB) Operating Temp. Connector (Std)* Mount 48*7.8mm * Straight 45*16.4*7.8mm R/A* R/A 72mm (Height) 9.8mm Hinged *Also available with Reverse Polarity Connectors 13 Please see :- for full data-sheets.

16 Cellular External with Cable and Connector Cellular Antenna External Range Cable and Connector Cellular external antennas are available in Magnetic, Adhesive, Screw, Wall and Pole Mount Versions. All antennas were designed using M2M market feedback for particular applications and for mounting on different materials. Please contact the Taoglas sales team to check which one is right for your install. The external range covers a wide variety of M2M installation requirements transportation, building mount, wall mount, remote monitoring equipment, vending machines, payment terminals, alarm systems, etc. If our range does not cover your individual needs please contact us at info@taoglas.com for the right solution. GA.107 G.21B GSA.8821.B Model No GA.107 G.21.B GSA.8821.B Penta-Band Penta-Band Penta-Band Whip Antenna Hercules I-Bar Adhesive Magnetic Mount Screw-Mount 3M Tape Working Frequency 8/900/1800 8/900/1800 8/900/1800 Gain Radiation Pattern Return Loss Efficiency /1900/2100MHz 2 dbi Typ. -Directional -15dB avg. 30% avg. /1900/2100MHz -0.5 dbi avg. -Directional -15 db avg. 40% avg. /1900/2100MHz 3.3 dbi avg. -Directional -1 2dB avg. 57% avg. Mechanical Data On non metal Operating Temp. Cable (Std)* Connector (Std)* Mounting IP Rating 120mm High 29.5mm 3M Rg-174 Magnetic IP 65 52*29mm 3M RG-174 Screw IP *15*6mm 3M RG-174 Adhesive IP 65 Please see :- for full data-sheets. 14

17 Combination M2M Antennas External Combination External Antenna Range For installation convenience without performance compromise our expanding combination antenna range has the highest performance in the market. From the compact robust Hercules to the recently launched patent pending highest efficiency/peak gain IP67 Bar, Spartan and Pantheon Series that can pass stringent PTCRB, AT&T, Sprint and other network approvals at even long cable lengths of 3 metres. Every relevant characteristic at all frequencies and the test methods used are all noted in detail in our specifications as even the smallest detail matters to deliver high performance in RF applications. We leave nothing out as we have nothing to hide. We are proud to say we are the only antenna manufacturer who does this. Mounting, cables and connector types can be customized for your application. MA.104.C MA.203 MA.206 MA.208 MA.1.C PartNo GPS Centre Frequency Gain Noise Figure Power Consumption Cellular/Wi-Fi VSWR Peak Gain Efficiency MechanicalData Mounting Operating Temp. Cable* Connector* IP Rating MA.104.C GPS/Cellular Screw-Hercules 2 Stage Active LNA MHz 30dBic typ. (@3V) 3.0dB Max (@3V) 13 2mA(@3V) Penta-band 8/900 /1800/1900/2100MHz dBi@ Mhz 0.1dBi@ MHz >20% H:29mm 52mm Thread 18mm 3M RG-174 / IP69K MA.203 GPS/Cellular Adhesive-Puck 2 Stage Active LNA MHz 30dBic typ. 1.5dB Max 19 2mA(@3~5V) Penta-band 8/900 /1800/1900/2100MHz >20% 55*55*10.8mm 3M 467 Tape 3M RG-174 / IP65 MA.206 GPS/Wi-Fi Adhesive-Puck 2 Stage Active LNA MHz 28dBic typ. 2.0dB Max 6mA(@3.5V) 2.4~2.5GHz >20% 55*55*10.8mm 3M 467 Tape 3M RG-174 /RP- IP65 MA.208 GPS/LTE/GSM/UMTS Adh esive Mount 2 Stage Active LNA MHz 30dBic typ. LET 700MHz/ Mhz/ Mhz dBi MHz 0.03dBi Mhz > 30% 200.5*66.5*9mm 3M 1600TB Tape 3M RG-174/CFD-200 / IP67 MA.1.C GPS/Wi-Fi Screw-Hercules 2 Stage Active LNA MHz 30dBic typ.(@3v) 3.0dB Max (@3V) 13 2mA(@3V) Dual-Band 2.4~2.5GHz 4.9~6.0GHz 1.8 3dBi GHz 4dBi GHz > 40% H:29mm 52mm Thread 18mm 3M RG-174/CFD-200 /RP- *Cable and Connectors are Customizable, Standard Length is 3M please contact us at info@taoglas.com ***COMING SOON: New high performance range of combination antennas for commercial vehicles, transportation and installations with long cable runs. IP69K 15 Please see :- for full data-sheets.

18 Combination GPS/Cellular/Wi-Fi Antennas Combination GPS Wi-Fi Cellular Antenna The Spartan MA.600 antenna is a heavy-duty, fully IP67 waterproof external M2M antenna for use in telematics, transportation and remote monitoring applications. The Spartan is unique in the market because it combines a 3in1 GPS, Cellular (2G and 3G) and Wi-Fi, heavy-duty antenna with high efficiency in a compact low profile format at only 35mm high. The antenna screws down permanently onto a roof or metal panel and can be pole or wall-mounted with a metal bracket. The unique robust metal base serves as its own ground-plane, the antenna has no need for an external ground-plan to mount to. It comes with a waterproof 3M adhesive underlay to permanently prevent any water from leaking under the antenna into the mounting hole. The Spartan antenna delivers over 37% efficiency and 2dBi+ peak gain at the connector on 3M of cable on frequency ranges of MHz for cellular, 2.4/4.9~6GHz for Wi-Fi/Public Safety/Zigbee and 4dBic for GPS. All while still maintaining 20dB isolation between antennas. The Spartan can also be supplied in single GPS, Cellular, Wi-Fi only configurations or at other frequency bands. MA.600 Part No Frequency Peak Gain Average Efficiency VSWR Mechanical Data Mounting Operating Temp. Cable* Connector* IP Rating MA.600 Screw-Mount GPS Cellular 2 Stage 32dBic LNA MHz Penta-band 8/900 /1800/1900/2100MHz 4.0dBic typ. -4.2dBi typ. % 37% H:35.1mm 145.6mm Thread 30mm 3M RG-174 3M CFD-200 IP67 Wi-Fi 2.4~2.5GHz 4.7~5.9GHz -3.25dBi typ. 48% 1.6 3M CFD-200 *Cable and Connectors are Customizable, Standard Length is 3M please contact us at info@taoglas.com Please see :- for full data-sheets. 16

19 Combination GPS/LTE/Cellular/Wi-Fi Antenna PANTHEON MA.700 SERIES HIGHEST PERFORMANCE Combination - GPS - Wi-Fi 2G/3G/4G Dome Screw-mount (Permanent Mount) Antenna The Pantheon MA.700 Series antennas are for RF professionals who want the best possible performance without compromise. This 3in1 MA.700 model antenna is a heavy-duty, omni-directional IP67 waterproof external M2M combination antenna for use in telematics, transportation and remote monitoring applications. The MA.700 is unique in the market because it combines the highest efficiency and peak gain GPS, LTE Cellular (2G and 3G) and Wi-Fi antennas together in a tough housing. The antenna screws down permanently onto a roof or metal panel and can be pole or wall-mounted with a metal bracket. The unique robust metal base serves as its own ground-plane, the antenna has no need for an external ground-plane to mount to. It comes with a waterproof 3M adhesive underlay to permanently prevent any water from leaking under the antenna into the mounting hole. It delivers over % efficiency at the connector on 3M (19ft) of cable on frequency ranges of MHz for cellular, 2.4/4.9~6GHz for Wi-Fi/Public Safety/Zigbee. Because of this it can pass in most cases network and PTCRB approvals at 3 metre cable length with a device on the spot. The integral GPS antenna has a peak gain of 4dBiC excluding cable loss. The MA.700 can also be supplied in single GPS, LTE/Cellular, Wi-Fi only configurations or at other frequency bands. MA.700 Part No Frequency Gain Average Efficiency VSWR Mechanical Data Mounting Operating Temp. Cable* Connector* IP Rating MA.700 Screw-Mount GPS LTE/Cellular 2 Stage 32dBic LNA Wide-Band MHz MHz Penta-band 8/900 /1800/1900/2100MHz 4.0dBic typ.@ Zenith -3.38dBi avg. % % H:85.73mm mm Thread 30mm 3M RG-174 3M Low-loss CFD-200 IP67 Wi-Fi 2.4~2.5GHz 4.7~5.9GHz 55.5% M Low-loss CFD Please see :- for full data-sheets.

20 Wide-band Antennas - External Wide-Band Antennas Taoglas Ceiling Mount Antenna CM.02 is a wideband antenna solution, 700 MHz to 6GHz, covering all cellular (2G, 3G,4G), and Wi-Fi , and many other ISM applications in one antenna. The antenna has high peak gain and exceptional efficiency across all bands enabling very wide coverage areas and high speed data rates. The radiation pattern has excellent -directional properties at all frequencies, a unique feature of this wide-band antenna compared to other designs in the market which tend to have nulls at certain bands. This antenna would provide all CPE and Hotspot needs literally "under one roof". The attractive, extremely light, and covert design allows the antenna to be easily mounted on a ceiling, and is suited to any indoor area that requires a Wireless Network - Hotels, Conference Centres, Exhibition Halls, Offices, and Retail Outlets etc. The design is unobtrusive, only 97.5mm in height, and blends in to any environment. CM.02 Part No Frequency(GHz) Peak Gain Average Efficiency Radiation Pattern Mechanical Data Mounting Operating Temp. Cable* Connector* IP Rating ~ 1.6dBi typ. 88% CM.02 High Peak Gain, High Efficiency Ceiling Antenna ~ 1.9dBi typ. 87% ~ 3.0dBi typ ~ 3.6dBi typ. 85% 81% -Vertical H:97.5mm 167.5mm Thread 17.25mm 0.3M RG-58 N Type Female IP ~ 3.6dBi typ. 73% ~ 4.4dBi typ. 65% *Cable and Connectors are Customizable, Standard Length is 3M please contact us at info@taoglas.com Please see :- for full data-sheets. 18

21 ISM External Terminal Range ISM (Industrial Scientific Medical) Terminal Antenna Range The ISM 433MHz, 868MHz, 915MHz and 2400MHz bands are license free bands mainly used in short range applications. We have a range of different gain antennas in different sizes and constantly updating our range, if you don't see what you want here please contact a local Taoglas sales representative. Many customers specify high peak gain as their main requirement, but the real key to choosing terminal antenna performance is uniformity of production quality across batches as these antennas are notoriously difficult to produce with uniform frequency response. Many unscrupulous antenna manufacturers ship out detuned unreliable products from batch to batch. In contrast every Taoglas product is tested rigorously and has to match our specification regarding VSWR/return loss at all frequencies in the band thus ensuring complete reliability of performance. Custom antennas can be designed quickly on request, this service will be subject to an MOQ and/or NRE. TI TI TI TI TI TI Model No TI TI TI TI TI TI MHz 868MHz 915MHz 433MHz 433MHz 433MHz Straight Fixed R/A Straight Fixed R/A Straight Hinged 90 Frequency MHz MHz MHz MHz MHz MHz Gain 0dBi typ. 0dBi typ. 0dBi typ. 0dBi typ. 0dBi typ. 3dBi typ. Return Loss -18.4dB -22dB -20dB -17dB -25dB Radiation Pattern VSWR Mechanical Data (mm) 169*12*12 55*17.1* *12*12 45*7.8* *7.8* *12*12 Mounting Straight Fixed R/A Fixed Straight Fixed R/A Fixed Straight Fixed Hinged 90 Operating Temp. Connector RA RA IP Rating IP65 IP65 IP65 IP65 Ip65 Ip65 19 Please see :- for full data-sheets.

22 ISM Embedded Flexible Circuit (with Cable & Connector) ISM Antenna Range with Cable and Connector Taoglas uniquely supplies highest gain omni-directional flexible circuit antenna solutions for the M2M market. Flexible circuit antennas have been used in many modern mobile phone antenna designs. The material performs very well at higher ISM band frequencies. The products from this range are used where there is no space on the device PCB for an onboard antenna, or there is a lot of metal present on the main PCB e.g. inside a meter system. The antenna can be stuck directly to the device plastic housing or glass by pulling off the 3M label and using the automotive grade 3M glue that is on one side of the antenna. Despite the extremely thin material the antennas are very robust and pass the required device temperature and vibration / shock tests. Cable and connector are fully customizable and IPEX MHF (U.FL compatible) and MMCX are standard. Custom surface mount flexible solutions have also been developed. FXP240 FXP245 FXP270 FXP280 FXP290 Model No FXP240 FXP245 FXP270 FXP280 FXP MHz 4Mhz 784MHz 868Mhz 915MHz Working Frequency MHz 4-457MHz MHz MHz MHz Peak Gain 0dBi 0dBi 1.4dBi 1.5dBi 1.5dBi Radiation Pattern Return Loss -20dB -20dB -20dB -20dB -20dB Efficiency >40% >40% >40% >40% >40% VSWR Mechanical Data Operating Temp. Cable (Std)* Connector (Std)* Material Adhesive Tape 75*45*0.1mm 100mm 1.13 IPEX U.FL comp Flex Circuit 3M *45*0.1mm 100mm 1.13 IPEX U.FL comp Flex Circuit 3M *45*0.1mm 100mm 1.13 IPEX U.FL comp Flex Circuit 3M *45*0.1mm 100mm 1.13 IPEX U.FL comp Flex Circuit 3M *45*0.1mm 100mm 1.13 IPEX U.FL comp Flex Circuit 3M 467 *Cables and Connectors are Customizable Please see :- for full data-sheets. 20

23 ISM Embedded ISM Embedded Antenna Range The ILA.01 for 915MHz and ILA.02 for 868MHz, have efficiencies of between 40-70%, these loop antennas show at least three times the efficiency of traditional chip antennas. At a size of 10*3.2*0.6mm no other antenna range in the market can meet the same size and efficiency combination. The PC31 dual band 868/915MHz PCB antenna, and the PC81 and PC91 for 868MHz and 915MHz respectively are FR4 PCB antennas designed especially for ISM applications, they have been designed to maximise gain and efficiency in an omni-directional pattern. Cables and Connectors are customizable. ILA.01 ILA.02 PC.31 PC.81 PC.91 Model No ILA.01 ILA.02 PC31 PC81 PC91 915Mhz 868Mhz 868/915Mhz 868Mhz 915Mhz Working Frequency Mhz Mhz Mhz Mhz Mhz Mhz Peak Gain 1dBi 2.4dBi 2.3dBi / 1.6dBi 2.5dBi 2dBi Radiation Pattern Return Loss VSWR Efficiency Mechanical Data % Typ % Typ. <-25dB 2.0 >75% 2.0 >% 2.0 >% Operating Temp. Cable (Std)* Connector (Std)* Material 10*3.2*0.6mm - -SMD Ceramic 10*3.2*0.6mm - -SMD Ceramic 90*55*0.8mm mm 1.13 IPEX U.FL comp FR4 34*7*0.8mm 100mm 1.13 IPEX U.FL comp FR4 with foam 34*7*0.8mm 100mm 1.13 IPEX U.FL comp FR4 with foam *Cables and Connectors are Customizable 21 Please see :- for full data-sheets.

24 ISM External Screw-Mount Antennas ISM (Industrial Scientific Medical) External Antenna Range The Hercules is a high performance steel thread mount antenna for external use on mesh networks, vehicles and outdoor and indoor assets. It is designed for heavy duty work with extra thick threads. Durable UV resistant ABS housing is resistant to vandalism and direct attack. The range includes the IS.01 antenna for 433MHz (ISM) licensed band, IS.04 for 868Mhz band, IS.05 for the 915MHz band, and the WS.01 antenna for 2.4GHz/4.9 to 6GHz Dual-Band - Wi-Fi, Zigbee, Bluetooth, and Public Safety. (see GHz External Section for more info on the WS.01). -directional high gain across all bands ensures constant reception and transmission. At only 29 mm height they comply with the latest EU height restrictions directives for roof-mounted objects, with a diameter of 52 mm. Designed to not catch on tree-branches. The antenna can be mounted on metal structures. IS.01.B IS.04.B IS.05.B Model No IS.01.B IS.04.B IS.05.B 433MHz 868MHz 915MHz Screw-Mount Screw-Mount Screw-Mount Frequency Gain Return Loss Radiation Pattern VSWR Efficiency Mechanical Data MHz 0dBi -16dB MHz 1.98dBi typ. -13dBi 2.5 >30% MHz 1.85dBi typ. -15dB 2.5 >25% (mm) Mounting Operating Temp. Cable* Connector* IP Rating H:29 52mm Thread 18mm 3M CFD-200 IP69 H:29 52mm Thread 18mm 3M RG-174 IP69 H:29 52mm Thread 18mm 3M RG-174 IP69 Please see :- for full data-sheets. 22

25 2.4GHz Antenna Solutions Embedded (Internal) Embedded Wi-Fi /Zigbee / BT Antenna Solutions Part of the ISM offering for wireless applications includes a range of Bluetooth / Wi-Fi / WLAN / / Zigbee solutions. All a requirements are supported. These antennas are used for shorter range applications. We have developed a ceramic miniature loop antenna for 2.4GHz wireless communications. The WLA.01 has been designed for WLAN, Zigbee and Bluetooth mobile devices and modules, which have very small space requirements. This antenna has efficiencies of between 40-80%+, it shows at least three times the efficiency of the existing traditional chip antennas from leading brands on small board sizes. Taoglas have introduced a 12*12*4mm; high gain; 2.4GHz SMT patch antenna, which is ideally suited for high performance industrial applications in Wi-Fi, ISM, Zigbee bands. Also the new WLP.25 Ceramic patch (25*25*4mm), its high gain performance is a perfect solution for metering and remote monitoring applications; it can deliver longer range than smaller chip antennas. PA.15 WLA.01 WLP.25 SWLP.12 Model No PA. 15 WLA.01 WLP.25 SWLP GHz 2.4GHz 2.4GHz 2.4GHz Ceramic PIFA Electrical Specification Ceramic Loop Ceramic Patch SMT Ceramic Patch Frequency Peak Gain Return Loss Op. Temp. Mounting Data MHz -3dBi -21dB 24MHz 2.5dBi -22dB 24MHz 5.0dBic@Zenith -30dB MHz 2dBi -9dB 8.7*6.2*3.2mm 3.2*1.6*0.6mm 25*25*4.5mm 12*12*4mm Mounting SMT Mount SMT Mount Pin SMT Mount NITTO #15 Please check out our new high efficiency Embedded SMT and Cable Connection Dual-band 2.4GHz/5GHz antennas if using n 23 Please see :- for full data-sheets.

26 2.4GHz Antenna Solutions Embedded (Cable & Connector) Embedded Wi-Fi/ ZigBee / BT PCB and Flexible Antenna Solutions Our PCB antennas come in single-band or multi-band solutions, starting from 433MHz up to 6 GHz. This range covers all standard communication bands in use worldwide today. Taoglas have developed high peak gain, high efficiency FXP technology Flexible Antennas for 2.4GHz, which boost coverage and data-speed performance of Wi-Fi , ZigBee, Bluetooth and ISM applications. We have a range of sizes available, and cable length and connectors are fully customizable. These antennas have been designed to work on different plastics material and thickness. The FXP70 and FXP73 can be adhered directly to a device housing and the FXP72 is designed for the antenna to be placed parallel between a battery and the main device PCB with just the leading edge sticking out from the edge of the PCB, thus being ideal and providing higher performance for small tag devices where on-board antennas cannot be mounted PC11 FXP70 FXP72 FXP73 Model No PC11 FXP70 FXP72 FXP73 2.4GHz/5.2GHz Freedom 2.4GHz Freedom 2.4GHz Blue Diamond Electrical Specification FR4 PCB General Solution Ground Coupling 2.4GHz Frequency Peak Gain VSWR Efficiency Return Loss Op. Temp. Mounting Data 2.4GHz/5-6GHz 2dBi 1.8dB Max -21dB MHz 5 dbi 1.5dB Max 80% -20dB MHz 4 dbi 2.0dB Max 70% -14dB MHz 2.5 dbi 1.5dB Max % -20dB Cable* Connector* Mounting 66*16*0.8mm mm IPEX (U.FL) N/A 27*25*0.1mm mm IPEX (U.FL) 3M 467Tape 31*31*0.1mm mm IPEX (U.FL) 3M 467Tape 47*7*0.1mm mm IPEX (U.FL) 3M 467Tape *Cables and Connectors Customizable **For n applications please check out our new patent pending high peak gain, high efficiency Dual-band FXP-810 and FXP-830 series antennas. Please see :- for full data-sheets. 24

27 2.4GHz/ GHz Dual Band Antenna Solutions Embedded (Cable & Connector) GHz to 6.0GHz Flexible PCB Antennas Responding to the demands of the latest n applications such as real-time video streaming which need the highest data speeds, Taoglas has developed patent pending unique high efficiency (80%+) Flexible Polymer Dual-Band Antennas that cover 2.4GHz and 4.9GHz to 6GHz.The FXP810 and FXP830 are breakthrough very high efficiency small Dual Band Dipole antennas for 2.4/4.9-6GHz bands. The Taoglas FXP series are conformal flexible antennas and can fit irregular housings. The FXP810 has a peak gain of 1.5dBi at 2.4GHz and efficiencies of 60-70%, increasing to 5dBi and 80-90% along bands 4.9GHz to 6GHz. At 31*31*0.1mm in size this antenna is uniquely valuable for small tag type mobile devices in that it can slip between the battery and the main PCB ground of small devices to get increased performance from the ground coupling effect. The FXP830 has a peak gain of 1.8dBi at 2.4GHz and efficiencies of %, and 3-4dBi and 80-90% along bands 4.9GHz to 6GHz. The FXP830 is a high efficiency, small, dual-band, dipole antenna for 2.4/4.9-6GHz band including Bluetooth and Wi-Fi. This Taoglas patent pending antenna is unique in the market because it is made from flexible material, has a tiny form factor (42*7*.01mm) and has double-sided 3M tape for easy peel and stick mounting. The FXP830 is the ideal all-round antenna solution for squeezing into narrow spaces and still maintaining high performance, for example at the top of LCD devices. FXP810 FXP830 Model No Electrical Specification Frequency Peak Gain Efficiency Return Loss Op. Temp. Mounting Data Cable* Connector* Mounting FXP810 Dual-Band 2.4GHz Ghz MHz MHz 1.5dBi ( GHz) 5.1dBi( GHz) 56%( GHz) 78%( GHz) -27dB 31*31*0.1mm mm IPEX (U.FL) 3M 467Tape FXP830 Dual-Band 2.4GHz Ghz MHz MHz 1.8dBi ( GHz) 3.6dBi( GHz) %( GHz) 86%( GHz) -26dB 47*7*0.1mm mm IPEX (U.FL) 3M 467Tape *Cables and Connectors Customizable 25 Please see :- for full data-sheets.

28 2.4GHz/5GHz External (Terminal Mount) External 2.4GHz/5GHz Antenna Solutions Terminal Mount Taoglas offer an extensive range of antennas including Wi-Fi, , Zigbee and Bluetooth for wireless applications, -directional gain across all bands ensures constant reception and transmission with these types of antennas. The antenna structures are designed for robust handling with housings made with TPE, which gives superior environmental reliability and a quality finish. The hinged versions, GW.11, GW.15, GW.58 and GW.71 antennas can be rotated 90 degrees on the base hinge for ease of placement. Connector mount is fully customizable. Taoglas terminal antennas are 100% tested for accurate VSWR/return loss to match their product specification, unlike many unscrupulous antenna manufacturers whose shipping product does not match their specification. External antennas deliver the best performance for any wireless device and Taoglas solutions are available in different gain versions for different range or power requirements. GW.11 GW.15 GW.26 GW.58 GW.71 Part No GW GHz Hinged Electrical Specification Frequency Gain Out. Radiation VSWR MHz 1.8 dbi -Directional Max 1.92 Op. Temp. Mounting Data (mm) Connector* Mounting L= RP- Hinged 90 GW GHz Hinged MHz 2dBi -Directional Max 1.8 L= Hinged 90 GW GHz Fixed R/A MHz 0dBi -Directional Max 2.0 L= ** Fixed 90 GW GHz Straight MHz 0dBi -Directional Max 1.2 L= ** Fixed Straight GW GHz/5.2GHz Hinged MHz MHz 3dBi -Directional < 2.0 L= RP- Hinged 90 GW GHz/5.2GHz Terminal-Hinged MHz MHz 5dBi -Directional < 2.0 L= RP- Hinged 90 **Also available with RP-SMA Plug connectors *Custom antenna connector and gain versions available for a purchase order for a minimum order quantity MOQ and/or NRE Please see :- for full data-sheets. 26

29 2.4GHz/5GHz Antenna Solutions External External 2.4GHz/5GHz Antenna Solutions Taoglas offer an extensive range of high performance external antennas for Wi-Fi , Zigbee, ISM wireless applications. For rugged external mounting the Hercules WS.01.B screw mount antenna comes in a 2.4GHz-5GHz version for n applications and a combination with GPS versions. The WA.0 is a high efficiency, high gain adhesive mount dual band wireless antenna. Its high quality low profile covert housing can be attached onto the glass or plastic. The WA.0w waterproof IP67 version is designed for applications that require -directional gain across both bands to ensure wide coverage area and constant reception and transmission for Wi-Fi and Zigbee applications. The Taoglas range of panel directional antennas offer high gain for permanent wall, pole or roof mounting. They are very rugged and completely weatherproof for extremely long life in the harshest of environments. Brackets are included. WA.0 WS.01.B FG.PANEL.01 FG.PANEL.02 FG.PANEL.03 FG.PANEL.66 Part No WA.0 WS.01.B FG.PANEL.01 FG.PANEL.02 FG.PANEL.03 FG.PANEL GHz 2.4GHz/5.2GHz 2.4GHz 2.4GHz 2.4GHz 2.4GHz Stingray Hercules Screw- Panel Antenna Panel Antenna Panel Antenna Panel Antenna Adhesive Electrical Specification Mount U-bolt U-bolt U-bolt U-bolt Frequency MHz MHz MHz MHz MHz MHz Gain Out. Radiation VSWR Op. Temp. Mounting Data MHz 4 4dBi -Directional < 1.92: MHz 4dBi -Directional < 1.8.0:1 9dBi Horizontal/ Vertical < 2.0:1 12dBi Horizontal/ Vertical < 2.0:1 8dBi Horizontal/ Vertical < 1.5:1 14dBi Horizontal/ Vertical < 2.0:1 Cable* Connector Mounting IP Rating 55*10.8mm 3M RG-174 RP-* 3M Tape IP65 52*29mm 3M CFD 200 RP-* Screw Mount IP69K 220*125*35mm N Type Female Pole/Wall 218*200*35mm N Type Female Pole/Wall 390*390*25mm N Type Female Pole/Wall 490*170*90mm N Type Female Pole/Wall *cable and connectors customizable 27 Please see :- for full data-sheets.

30 WiMAX Antenna Solutions WiMAX end-to end solutions for Mesh Area Networks Taoglas' high efficiency ultra wide band antenna solutions have been designed to meet the demands of WiMAX applications such as Smart Grid, Smart Metering, Remote Monitoring and Wireless Broadband. The total WiMAX antenna mesh solution is available base station, remote / external antennas and antenna solutions for the end user or field device itself. Developed from years of cellular antenna design experience the range delivers the increased bandwidth required for WiMAX without performance compromise. Sector Antennas, CPE Antennas and a Flexible Circuit Embedded range are now available. SA Panel.19&21 SA.Panel.20 & 22 SA.Panel.30 FXP.100 Part No SA.Panel.19 Base-Station Vertical Polarized SA.Panel.20 Base-Station Vertical Polarized SA.Panel.21 Base-Station Vertical Polarized SA.Panel.22 Base-Station Vertical Polarized SA.Panel.30 Dual Port CPE Antenna FXP.100 Flex WiMAX PCB Antenna Frequency Gain Out. Radiation Return Loss Op. Temp. Mounting Data Connector Mounting MHz 15.5dBi -Directional <-14dB 430*70*70mm N Type Female Adjustable pipe mount (included) MHz 17 dbi -Directional <-14dB 630*70*70mm N Type Female Adjustable pipe mount (included) MHz 16.5 dbi -Directional <-14dB 430*70*70mm N Type Female Adjustable pipe mount (included) MHz 19 dbi -Directional <-14dB 630*70*70mm N Type Female Adjustable pipe mount (included) MHz 12dbi 45 Slant -Directional <-15dB 180*100*35mm SMA(F) x 2 Adjustable pipe mount (included) MHz 2dBi avg. -Directional 31*24*0.2mm IPEX MHF(U.FL) 1mm M 467 Tape Please see :- for full data-sheets. 28

31 LTE Antenna Solutions Ultra wideband Fourth Generation (4G) network antenna range Taoglas has launched a range of high efficiency antennas for the emerging LTE system using unique ultra wideband antenna design techniques. The range allows designers to start testing and developing LTE devices with antennas designed to operate efficiently in the bands of interest. We have used years of cellular antenna design experience to predict the requirements of these new designs for emerging networks. These antenna designs can be optimised and/or customised for any 4G device. Onboard solutions of the flexible circuit antennas are also available. FXP400 Part No Working Frequency Gain Radiation Pattern Return Loss Efficiency Mechanical Data Operating Temp. Cable (Std)* Connector (Std)* Mounting FXP400 LTE Embedded Flex Adhesive Mount 3M Tape MHz & MHz dbi Peak -Directional >70% 100*38*0.1mm 100mm coax IPEX U.FL comp 3M 467MP Type 29 Please see :- for full data-sheets.

32 Cable Assembly Solutions Taoglas offers a complete range of complimentary RF cable assemblies and connectors for internal and external use. We can supply raw cable-assembly materials OR manufacture cable assemblies with any connector configuration to client specification in our world-class factories. Our factories have the most advanced rotary and laser cutting equipment for accurate coaxial cable stripping and processing, hot-bar soldering technology for mini coaxial cable terminations and semi-automatic crimping for high volume production. Taoglas provides a 100% functionally tested Cable Interconnect Solution, from the smallest diameter 0.81mm coaxial cables to ultra low loss high performance CFD mm. A progressive QC Inspection system throughout the production process, guarantees the highest quality cable assembly manufacturing to the most stringent world standards. Return-loss (RL) testing ensures the cable assemblies conform to the specified operating frequency. Please see :- for full data-sheets. 30

33 Cable Assembly Solutions We also stock a wide range of popular type cable assemblies, to ensure our clients have support for those unforeseen moments. Increase your development efficiency by having the correct cables on time to test the rest of your system with your state of the art antenna solution. Stocked Configurations Include: IPEX (MHF), SMA, SMB, SMC, MCX, MMCX, FME, N-Type, TNC, FAKRA, assemblies in different genders and mounting styles. U.FL SMA SMB MCX R/A MMCX FME N Type Fakra Code C Fakra Code D Our New Range of Switch Connectors available which can be easily added to your board so you can have the option of an external antenna connection to allow you to use one device anywhere. 0.81, 1.13, RG-178, RG-174, RG-316, RG-213, RG-223, LMR-200(CFD200), LMR-400(CFD400) cable in any length RG-174 RG-178 CFD-200 Cannot find your standard configuration online? Feel free to your enquiry to our response team, and they will gladly send you the required info. Consult our Sales Network in your region for more info and supported configurations. 31 Please see :- for full data-sheets.