TEST REPORT FROM RFI GLOBAL SERVICES LTD

Transcription

1 TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: NTT docomo P-05C To: OET Bulletin 65 Supplement C: ( ) Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 supersedes all previous versions This Test Report Is Issued Under The Authority Of Chris Guy, Head of Global Approvals: (APPROVED SIGNATORY) pp Checked By: Richelieu Quoi (APPROVED SIGNATORY) Issue Date: 24 March 2011 Test Dates: 15 March to 24 March 2011 This report is issued in portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested.

2 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 This page has been left intentionally blank. Page: 2 of 169 RFI Global Services Ltd.

3 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 TABLE OF CONTENTS 1. Customer Information Equipment Under Test (EUT) Test Specification, Methods and Procedures Deviations from the Test Specification Operation and Configuration of the EUT during Testing Summary of Test Results Measurements, Examinations and Derived Results Measurement Uncertainty Appendix 1. Test Equipment Used Appendix 2. Measurement Methods Appendix 3. SAR Distribution Scans Appendix 4. Photographs Appendix 5. Validation of System Appendix 6. Simulated Tissues Appendix 7. DASY4 System Details Page: 3 of 169 RFI Global Services Ltd.

4 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Customer Information Company Name: Address: Panasonic Mobile Comms Dev of Europe Ltd Panasonic House Willoughby Road Bracknell Berkshire RG12 8FP United Kingdom Page: 4 of 169 RFI Global Services Ltd.

5 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Equipment Under Test (EUT) 2.1. Identification of Equipment Under Test (EUT) Description: Mobile Handset Brand Name: Model Name or Number: NTT docomo P-05C Serial Number: None Stated (Customer Label: Sample C4) IMEI Number: Hardware Version Number: Software Version Number: Hardware Revision of GSM Module: Software Revision of GSM Module: FCC ID Number: Country of Manufacture: Rev C B-D11SL D11SL1_Cv Not Applicable Not Applicable UCE211039A Japan Date of Receipt: 14 March Description of EUT The equipment under test was a Dual mode mobile handset operating in the UMTS FDD V, PCS1900 band, WiFi 2450 band Bluetooth band and RFID. The EUT operates on UMTS Release 5 HSDPA 850 MHz Band, GPRS class 10, b/g/n and Bluetooth 2400 MHz Band Modifications Incorporated in the EUT There were no modifications incorporated in the EUT. Page: 5 of 169 RFI Global Services Ltd.

6 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Accessories The following accessories were supplied with the EUT during testing: Description: Battery Brand Name: NTT Model Name or Number: P20* Serial Number: Cable Length and Type: Country of Manufacture: Connected to Port None Stated Not Applicable None Stated 3 point contact Description: Personal Hands-Free Brand Name: NTT docomo Model Name or Number: Stereo Earphone Set 01 Serial Number: None Stated Cable Length and Type: ~1.8m / multi-core Country of Manufacture: None Stated Connected to Port AV Out Port Unique to Manufacturer Description: Brand Name: Model Name or Number: Serial Number: Cable Length and Type: Country of Manufacture: Connected to Port Micro-SD Memory Card Generic None Stated None Stated Not applicable None Stated Dedicated micro-sd card port Page: 6 of 169 RFI Global Services Ltd.

7 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Support Equipment The following support equipment was used to exercise the EUT during testing: Description: Wireless Communication Test Set Brand Name: Agilent Model Name or Number: 8960 Series 10 Serial Number: Cable Length and Type: Connected to Port: GB ~4.0m Utiflex Cable RF (Input / Output) Air Link Description: Wireless Communication Test Set Brand Name: Rohde & Schwarz Model Name or Number: CMU200 Serial Number: Cable Length and Type: ~4.0m Utiflex Cable Connected to Port: RF (Input / Output) Air Link Description: Communication Test Set Brand Name: Will tek Model Name or Number: 4202S Serial Number: Cable Length and Type: ~4.0m Utiflex Cable Connected to Port: RF (Input / Output) Air Link Page: 7 of 169 RFI Global Services Ltd.

8 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Additional Information Related to Testing Equipment Category UMTS FDD V / PCS1900/GPRS1900 /Bluetooth / WiFi802.11b/g/n /RFID Type of Unit Intended Operating Environment: Transmitter Maximum Output Power Characteristics: Portable Transceiver Within UMTS FDD V, GSM and WiFi Coverage UMTS Band V PCS1900 WiFi802.11b/g/n Bluetooth Communication Test Set was configured to allow the EUT to transmit at a maximum power of up to 24dBm. Communication Test Set was configured to allow the EUT to transmit at a maximum power of up to 30dBm. EUT setup in test mode to allow the EUT to transmit at a maximum power of up to 15dBm. ~2dBm Transmitter Frequency Range: UMTS Band V (826 to 847) MHz Transmitter Frequency Allocation of EUT When Under Test: Modulation(s): Modulation Scheme (Crest Factor): Type: Length: Number of Positions: PCS1900 WiFi802.11b/g/n Channel Number (1850 to 1910) MHz (2412 to 2462) MHz Channel Description Frequency (MHz) 4132 Low Middle High Low Middle High Low Middle 2437 QPSK (UMTS / HSDPA):0 Hz GMSK (GSM / GPRS): 217 HZ DBPSK, CCK (WiFi): 0 Hz QPSK (UMTS FDD/HSDPA):1 GMSK (GSM): 8.3 GMSK (GPRS): 4 DBPSK, CCK (WiFi): 1 Internal Power Supply Requirement: 3.7V Battery Type(s): Unknown 2 fixed (GSM and Wi-Fi) With TV extendable and retractable antenna Li-ion Page: 8 of 169 RFI Global Services Ltd.

9 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Test Specification, Methods and Procedures 3.1. Test Specification Reference: OET Bulletin 65 Supplement C: ( ) Title: Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. To determine whether the equipment met the basic restrictions as defined in Purpose of Test: OET Bulletin 65 Supplement C: ( ) using the SAR averaging method as described in the test specification above Methods and Procedures Reference Documentation The methods and procedures used were as detailed in: Federal Communications Commission, Evaluating compliance with FCC Guidelines for human exposure to radio frequency electromagnetic fields, OET Bulletin 65 Supplement C, FCC, Washington, D.C, 20554, Thomas Schmid, Oliver Egger and Neils Kuster, Automated E-field scanning system for dosimetric assessments, IEEE Transaction on microwave theory and techniques, Vol. 44, pp , January Neils Kuster, Ralph Kastle and Thomas Schmid, Dosimetric evaluation of mobile communications equipment with know precision, IEICE Transactions of communications, Vol. E80-B, No.5, pp , May KDB D01 Mobile Portable RF Exposure v04 KDB D01 SAR Handsets Multi Xmiter and Ant v01r05 KDB D01 SAR test for 3G devices v02 KDB D01 SAR measurement Procedure for a/b/g Transmitters v01r Definition of Measurement Equipment The measurement equipment used complied with the requirements of the standards referenced in the methods & procedures section above. Appendix 1 contains a list of the test equipment used. Page: 9 of 169 RFI Global Services Ltd.

10 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Deviations from the Test Specification Test was performed as per KDB D01 Mobile Portable RF Exposure v04, KDB D01 SAR Handsets Multi Xmiter and Ant v01r05, according to the handset procedures in IEEE Std , OET Bulletin 65 Supplement C and the specific FCC test procedures. 3G Body SAR test was performed in the middle channel as the measured SAR levels were < 0.8 W/kg, where the transmission band corresponding to all channels were 100 MHz. Testing for the other channels were not required as stated in KDB D01. SAR test was performed in the highest output channel for WLAN as the measured SAR levels were < 0.8 W/kg, where the transmission band corresponding to all channels were 100 MHz. Testing for the other channels were not required as stated in KDB D01. Simultaneous transmission was not evaluated as the sum of the individual SAR for WWAN and WLAN was < 0.8 W/kg and the antenna-to-antenna distance was greater than 5 cm. Page: 10 of 169 RFI Global Services Ltd.

11 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Operation and Configuration of the EUT during Testing 5.1. Operating Modes The EUT was tested in the following operating mode(s) unless otherwise stated: PCS1900 Call allocated mode with Communication Test Set configured to allow the EUT to transmit at a maximum power of up to 30 dbm. GPRS1900 Data allocated mode with Communication Test Set configured to allow the EUT to transmit at a maximum power of up to 30 dbm. UMTS Band V 12.2kbps with test loop mode 1 and TPC bits configured to all "1's" and Communication Test Set configured to allow the EUT to transmit at a maximum power of up to 24 dbm. UMTS FDD V - RMC 12.2kbps + HSDPA With Test loop mode 1 and TPC bits configured to all "1's", Sub-test 1and Communication Test Set configured to allow the EUT to transmit at a maximum power of up to 24 dbm. WiFi b/g/n Data allocated test mode using manufacturer customised software OMTN2 Ver It was setup in test mode to allow the EUT to transmit at a maximum power of up to 15dBm. WLAN SAR test was performed on the middle channel as the measured values were < 50% of the SAR limit as stated in the FCC Public Notice DA by the SCC-34/SC-2. The overall worst case configuration on the middle channel using 1 Mbps for b was also evaluated on middle channel using 6 Mbps for 802,11g and 6.5 Mbps for n. Page: 11 of 169 RFI Global Services Ltd.

12 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Configuration and Peripherals The EUT was tested in the following configuration(s) unless otherwise stated: Standalone Battery Powered EUT tested in Head and Body-worn configuration. The applied configurations for body-worn orientations where the corresponding edge(s) is closest to the user with the most conservative exposure condition Head Configuration a) The EUT was placed in a normal operating position with the centre of the ear-piece aligned with the ear canal on the phantom. b) With the ear-piece touching the phantom the centre line of the EUT was aligned with an imaginary plane (X and Y axis) consisting of three lines connecting both ears and the mouth. c) For the cheek position the EUT was gradually moved towards the cheek until any point of the mouth-piece or keypad touched the cheek. d) For the tilted position the EUT was positioned as for the cheek position, and then the horizontal angle was increased by fifteen degrees (the phone keypad was moved away from the cheek by fifteen degrees). e) SAR measurements were evaluated at maximum power and the unit was operated for an appropriate period prior to the evaluation in order to minimise the drift. f) The device was keyed to operate continuously in the transmit mode for the duration of the test. g) The location of the maximum spatial SAR distribution (hot spot) was determined relative to the EUT and its antenna. h) The EUT was transmitting at full power throughout the duration of the test powered by a fully charged battery. Body Configuration a) The EUT was placed in a normal operating position where the centre of EUT was aligned with the centre reference point on the flat section of the SAM phantom. b) With the EUT touching the phantom at an imaginary centre line. The EUT was aligned with a marked plane (X and Y axis) consisting of two lines. c) For the touch-safe position the EUT was gradually moved towards the flat section of the SAM phantom until any point of the EUT touched the phantom. d) For position(s) greater then 0mm separation the EUT was positioned as per the touch-safe position, and then the vertical height was decreased/adjusted as required. e) SAR measurements were evaluated at maximum power and the unit was operated for an appropriate period prior to the evaluation in order to minimise the drift. f) The device was keyed to operate continuously in the transmit mode for the duration of the test. g) The location of the maximum spatial SAR distribution (hot spot) was determined relative to the EUT and its antenna. h) The EUT was transmitting at full power throughout the duration of the test powered by a fully charged battery. Page: 12 of 169 RFI Global Services Ltd.

13 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Summary of Test Results Test Name Specification Reference Result Specific Absorption Rate-UMTS-FDD V Head OET Bulletin 65 Supplement C: Configuration 1g ( ) Complied Specific Absorption Rate-UMTS-FDD V Body OET Bulletin 65 Supplement C: Configuration 1g ( ) Complied Specific Absorption Rate-UMTS-FDD V + OET Bulletin 65 Supplement C: HSDPA Body Configuration 1g ( ) Complied Specific Absorption Rate-PCS 1900 Head OET Bulletin 65 Supplement C: Configuration 1g ( ) Complied Specific Absorption Rate-GPRS 1900 Body OET Bulletin 65 Supplement C: Configuration 1g ( ) Complied Specific Absorption Rate-PCS 1900 Body OET Bulletin 65 Supplement C: Configuration 1g ( ) Complied Specific Absorption Rate-Wi-Fi b/g/n OET Bulletin 65 Supplement C: Body Configuration 1g ( ) Complied SAR Individual Transmitter Evaluation device, mode Frequency, (MHz) P x (mw) P REF (mw) single SAR, W/kg Remarks WWAN, UMTS WWAN, GSM WLAN, WiFi802.11b/g/n FDD V Routine Evaluation Routine Evaluation Routine Evaluation BT, Bluetooth 2410 ~ 2 12 :=0 {P BT 2P REF } {d WWAN, BT > 5cm} SAR Simultaneous Transmitter Evaluation (x,y) D(x,y) cm L(x,y) cm SPLSR xy Sim-Tx SAR Remarks (WWAN GSM, BT) >5 n/a n/a n/a {no stand-alone SAR for BT} (WWAN GSM, Wi-Fi) >5 n/a n/a n/a Note(s): {D(x,y) > 5 } & {Σ WWAN, WLAN < 1.6 W/kg} 1. Simultaneous transmission evaluation was not required as the output power for Bluetooth was < (60/f) and the Sum of all antenna < 1.6w/kg. 2. Bluetooth transmitter thresholds output power P Ref = 12 as listed in KDB Px: power level measured by RFI. 4. Single SAR value was measured by RFI. 5. The -to- distance and -to-user distance were provided by the customer Location of Tests All the measurements described in this report were performed at the premises of RFI Global Services Ltd, Pavilion A, Ashwood Park, Ashwood Way, Basingstoke, Hampshire, RG23 8BG United Kingdom Page: 13 of 169 RFI Global Services Ltd.

14 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Measurements, Examinations and Derived Results 7.1. General Comments This section contains test results only. Measurement uncertainties are evaluated in accordance with current best practice. Our reported expanded uncertainties are based on standard uncertainties, which are multiplied by an appropriate coverage factor to provide a statistical confidence level of approximately 95%. Please refer to section 8 for details of measurement uncertainties. Page: 14 of 169 RFI Global Services Ltd.

15 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Test Results Specific Absorption Rate - UMTS-FDD V Head Configuration 1g Test Summary: Tissue Volume: 1g Maximum Level (W/kg): Environmental Conditions: Temperature Variation in Lab ( C): 23.0 to 23.0 Temperature Variation in Liquid ( C): 23.7 to 23.7 Results: EUT Position Touch Slide Closed Retracted Touch Slide Closed Extended Touch Slide Open Retracted Touch Slide Open Extended Tilt Slide Closed Retracted Tilt Slide Closed Extended Tilt Slide Open Retracted Tilt Slide Open Extended Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Left , 2 Complied Left , 2 Complied Left , 2 Complied Left , 2 Complied Left , 2 Complied Left , 2 Complied Left , 2 Complied Left , 2 Complied Page: 15 of 169 RFI Global Services Ltd.

16 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Specific Absorption Rate - UMTS-FDD V Head Configuration 1g (Continued) EUT Position Touch Slide Closed Retracted Touch Slide Closed Extended Touch Slide Open Retracted Touch Slide Open Extended Tilt Slide Closed Retracted Tilt Slide Closed Extended Tilt Slide Open Retracted Tilt Slide Open Extended Note(s): Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Right , 2 Complied Right , 2 Complied Right , 2 Complied Right , 2 Complied Right , 2 Complied Right , 2 Complied Right , 2 Complied Right , 2 Complied 1. SAR test was performed in the middle channel only as the measured levels were < 50% of the SAR limit as stated in the FCC Public Notice DA by the SCC-34/SC kbps RMC with TPC bits configured to all "1's". Page: 16 of 169 RFI Global Services Ltd.

17 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate - UMTS-FDD V Body Configuration 1g Test Summary: Tissue Volume: 1g Maximum Level (W/kg): Environmental Conditions: Temperature Variation in Lab ( C): 23.0 to 23.0 Temperature Variation in Liquid ( C): 21.2 to 21.2 Results: EUT Position Front of EUT Facing Phantom with Slide Closed Retracted Front of EUT Facing Phantom with Slide Closed Extended Front of EUT Facing Phantom with Slide Open Retracted Front of EUT Facing Phantom with Slide Open Extended Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Page: 17 of 169 RFI Global Services Ltd.

18 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Specific Absorption Rate - UMTS-FDD V Body Configuration 1g (Continued) EUT Position Rear of EUT Facing Phantom with Slide Closed Retracted Rear of EUT Facing Phantom with Slide Closed Extended Rear of EUT Facing Phantom with Slide Open Retracted Rear of EUT Facing Phantom with Slide Open Extended Rear of EUT Facing Phantom with Slide Closed Retracted with PHF Note(s): Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied 1. SAR measurements were performed with the EUT at a separation distance of 15mm from the 'SAM' phantom flat section. 2. SAR test was performed in the middle channel only as the measured levels were < 50% of the SAR limit as stated in the FCC Public Notice DA by the SCC-34/SC kbps RMC with TPC bits configured to all "1's". Page: 18 of 169 RFI Global Services Ltd.

19 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate - UMTS-FDD V + HSDPA Body Configuration 1g Test Summary: Tissue Volume: 1g Maximum Level (W/kg): Environmental Conditions: Temperature Variation in Lab ( C): 23.0 to 23.0 Temperature Variation in Liquid ( C): 21.2 to 21.2 Results: EUT Position Rear of EUT Facing Phantom with Slide Closed Retracted Note(s): Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2, 3 Complied 1. SAR measurements were performed with the EUT at a separation distance of 15mm from the 'SAM' phantom flat section. 2. SAR test was performed in the middle channel only as the measured levels were < 50% of the SAR limit as stated in the FCC Public Notice DA by the SCC-34/SC RMC+ HSDPA Enabled using FRC with H-Set 1, Test loop mode 1 and TPC bits configured to all "1's", Sub-test 1. Page: 19 of 169 RFI Global Services Ltd.

20 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate - PCS 1900 Head Configuration 1g Test Summary: Tissue Volume: 1g Maximum Level (W/kg): Environmental Conditions: Temperature Variation in Lab ( C): 23.0 to 23.0 Temperature Variation in Liquid ( C): 23.5 to 23.5 Results: EUT Position Touch Slide Closed Retracted Touch Slide Closed Extended Touch Slide Open Retracted Touch Slide Open Extended Tilt Slide Closed Retracted Tilt Slide Closed Extended Tilt Slide Open Retracted Tilt Slide Open Extended Tilt Slide Open Extended Tilt Slide Open Extended Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Left Complied Left Complied Left Complied Left Complied Left Complied Left Complied Left Complied Left Complied Left Complied Left Complied Page: 20 of 169 RFI Global Services Ltd.

21 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Specific Absorption Rate - PCS 1900 Head Configuration 1g (Continued) EUT Position Touch Slide Closed Retracted Touch Slide Closed Extended Touch Slide Open Retracted Touch Slide Open Extended Tilt Slide Closed Retracted Tilt Slide Closed Extended Tilt Slide Open Retracted Tilt Slide Open Extended Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Right Complied Right Complied Right Complied Right Complied Right Complied Right Complied Right Complied Right Complied Page: 21 of 169 RFI Global Services Ltd.

22 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate - GPRS 1900 Body Configuration 1g Test Summary: Tissue Volume: 1g Maximum Level (W/kg): Environmental Conditions: Temperature Variation in Lab ( C): 23.0 to 23.0 Temperature Variation in Liquid ( C): 23.2 to 23.2 Results: EUT Position Front of EUT Facing Phantom with Slide Closed Retracted Front of EUT Facing Phantom with Slide Closed Extended Front of EUT Facing Phantom with Slide Open Retracted Front of EUT Facing Phantom with Slide Open Extended Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2 Complied Flat (SAM) , 2 Complied Flat (SAM) , 2 Complied Flat (SAM) , 2 Complied Page: 22 of 169 RFI Global Services Ltd.

23 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Specific Absorption Rate - GPRS 1900 Body Configuration 1g (Continued) EUT Position Rear of EUT Facing Phantom with Slide Closed Retracted Rear of EUT Facing Phantom with Slide Closed Extended Rear of EUT Facing Phantom with Slide Open Retracted Rear of EUT Facing Phantom with Slide Open Extended Front of EUT Facing Phantom with Slide Open Extended With PHF Note(s): Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2 Complied Flat (SAM) , 2 Complied Flat (SAM) , 2 Complied Flat (SAM) , 2 Complied Flat (SAM) , 2 Complied 1. SAR measurements were performed with the EUT at a separation distance of 15mm from the 'SAM' phantom flat section. 2. SAR test was performed in the middle channel only as the measured levels were < 50% of the SAR limit as stated in the FCC Public Notice DA by the SCC-34/SC-2. * GPRS mode configured with 2 Uplink slot active. Page: 23 of 169 RFI Global Services Ltd.

24 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate - PCS 1900 Body Configuration 1g Test Summary: Tissue Volume: 1g Maximum Level (W/kg): Environmental Conditions: Temperature Variation in Lab ( C): 23.0 to 23.0 Temperature Variation in Liquid ( C): 23.2 to 23.2 Results: EUT Position Front of EUT Facing Phantom with Slide Open Extended Note(s): Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2 Complied 1. SAR measurements were performed with the EUT at a separation distance of 15mm from the 'SAM' phantom flat section. 2. SAR test was performed in the middle channel only as the measured levels were < 50% of the SAR limit as stated in the FCC Public Notice DA by the SCC-34/SC-2. Page: 24 of 169 RFI Global Services Ltd.

25 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate - WLAN b/g/n Body Configuration 1g Test Summary: Tissue Volume: 1g Maximum Level (W/kg): Environmental Conditions: Temperature Variation in Lab ( C): 23.0 to 23.0 Temperature Variation in Liquid ( C): 21.9 to 21.9 Results: EUT Position Front of EUT Facing Phantom with Slide Closed Retracted Front of EUT Facing Phantom with Slide Closed Extended Front of EUT Facing Phantom with Slide Open Retracted Front of EUT Facing Phantom with Slide Open Extended Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Page: 25 of 169 RFI Global Services Ltd.

26 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Specific Absorption Rate WLAN b/g/n Body Configuration 1g (Continued) EUT Position Rear of EUT Facing Phantom with Slide Closed Retracted Rear of EUT Facing Phantom with Slide Closed Extended Rear of EUT Facing Phantom with Slide Open Retracted Rear of EUT Facing Phantom with Slide Open Extended Rear of EUT Facing Phantom with Slide Closed Retracted With PHF Rear of EUT Facing Phantom with Slide Closed Retracted Rear of EUT Facing Phantom with Slide Closed Retracted Note(s): Phantom Configuration Channel Number Level (W/kg) Limit (W/kg) Margin (W/kg) Note(s) Result Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 3 Complied Flat (SAM) , 2, 4 Complied Flat (SAM) , 2, 5 Complied 1. SAR measurements were performed with the EUT at a separation distance of 15mm from the 'SAM' phantom flat section. 2. SAR test was performed in the middle channel only as the measured levels were < 50% of the SAR limit as stated in the FCC Public Notice DA by the SCC-34/SC WLAN b at 1 Mbps 4. WLAN g at 6 Mbps 5. WLAN n at 6.5 Mbps Page: 26 of 169 RFI Global Services Ltd.

27 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Conducted Average Power Measurement UMTS FDD V Modes HSDPA WCDMA Voice / Sets RMC12.2kbps Band Channel Power (dbm) Avg. Power (dbm) Avg. Power (dbm) Avg. Power (dbm) Avg. Power (dbm) Avg ßc ßd ACK, NACK, CQI Sub-test 1 Setup for Release 5 HSDPA Sub-test β c β d Β d (SF) β c/ β d β hs (1) SM (db) (2) 1 2/15 15/ /15 4/ /15 (3) 15/15 (3) 64 12/15 (3) 24/ /15 8/ /8 30/ /15 4/ /4 30/ Note 1: Δ ACK, Δ NACK and Δ CQI = 8 A hs = β hs/β c = 30/15 β hs = 30/15 * β c Note 2: CM = 1 for β c/ β d = 12/15, Β hs/β c = 24/15 Note 3: For subtest 2 the β c/ β d ratio of 12/15 for the TFC during the measurement period (TF1, TF0) is achieved by setting the signalled gain factors for the reference TFC (TF1, TF1) to β c = 11/15 and β d = 15/15 PCS/GPRS 1900 Average Power Measurements Channel Number Frequency (MHZ) GSM TX Power before Test (dbm) GPRS TX Power before Test (dbm) Note Conducted Conducted Conducted Page: 27 of 169 RFI Global Services Ltd.

28 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Conducted Average Power Measurement (Continued) WLAN b/g/n Channel Number Frequency (GHZ) TX Power before Test (dbm) Note 2.4GHz b (1Mbps) 2.4GHz b (11Mbps) 2.4GHz g (6Mbps) 2.4GHz g (54Mbps) 2.4GHz n (6.5Mbps) 2.4GHz n (65Mbps) Page: 28 of 169 RFI Global Services Ltd.

29 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Measurement Uncertainty No measurement or test can ever be perfect and the imperfections give rise to error of measurement in the results. Consequently, the result of a measurement is only an approximation to the value of the measurand (the specific quantity subject to measurement) and is only complete when accompanied by a statement of the uncertainty of the approximation. The expression of uncertainty of a measurement result allows realistic comparison of results with reference values and limits given in specifications and standards. The uncertainty of the result may need to be taken into account when interpreting the measurement results. The reported expanded uncertainties below are based on a standard uncertainty multiplied by an appropriate coverage factor, such that a confidence level of approximately 95% is maintained. For the purposes of this document approximately is interpreted as meaning effectively or for most practical purposes. Test Name Confidence Level Calculated Uncertainty Specific Absorption Rate-UMTS-FDD V Head Configuration 1g 95% Specific Absorption Rate-UMTS-FDD V Body Configuration 1g 95% Specific Absorption Rate-PCS 1900 Head Configuration 1g 95% Specific Absorption Rate-GPRS/PCS 1900 Body Configuration 1g 95% Specific Absorption Rate-Wi-Fi 2450 Body Configuration 1g 95% The methods used to calculate the above uncertainties are in line with those recommended within the various measurement specifications. Where measurement specifications do not include guidelines for the evaluation of measurement uncertainty, the published guidance of the appropriate accreditation body is followed. Page: 29 of 169 RFI Global Services Ltd.

30 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate Uncertainty - UMTS FDD V Head Configuration 1g Standard υ + - Probability i Type Source of uncertainty Value Value Distribution Divisor ci Uncertainty (10g) or + u (%) - u (%) υ eff B Probe calibration normal (k=2) B Axial Isotropy normal (k=2) B Hemispherical Isotropy normal (k=2) B Spatial Resolution Rectangular B Boundary Effect Rectangular B Linearity Rectangular B Detection Limits Rectangular B Readout Electronics normal (k=2) B Response Time Rectangular B Integration Time Rectangular B RF Ambient conditions Rectangular B B B Probe Positioner Mechanical Restrictions Probe Positioning with regard to Phantom Shell Extrapolation and integration / Maximum SAR evaluation Rectangular Rectangular Rectangular A Test Sample Positioning normal (k=1) A Device Holder uncertainty normal (k=1) B Phantom Uncertainty Rectangular B Drift of output power Rectangular B Liquid Conductivity (target value) Rectangular A Liquid Conductivity (measured value) normal (k=1) B Liquid Permittivity (target value) Rectangular A Liquid Permittivity (measured value) normal (k=1) Combined standard uncertainty t-distribution >200 Expanded uncertainty k = >200 Page: 30 of 169 RFI Global Services Ltd.

31 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate- UMTS FDD V Body Configuration 1g Standard υ + - Probability i Type Source of uncertainty Value Value Distribution Divisor ci Uncertainty (10g) or + u (%) - u (%) υ eff B Probe calibration normal (k=2) B Axial Isotropy normal (k=2) B Hemispherical Isotropy normal (k=2) B Spatial Resolution Rectangular B Boundary Effect Rectangular B Linearity Rectangular B Detection Limits Rectangular B Readout Electronics normal (k=2) B Response Time Rectangular B Integration Time Rectangular B RF Ambient conditions Rectangular B B B Probe Positioner Mechanical Restrictions Probe Positioning with regard to Phantom Shell Extrapolation and integration /Maximum SAR evaluation Rectangular Rectangular Rectangular A Test Sample Positioning normal (k=1) A Device Holder uncertainty normal (k=1) B Phantom Uncertainty Rectangular B Drift of output power Rectangular B Liquid Conductivity (target value) Rectangular A Liquid Conductivity (measured value) normal (k=1) B Liquid Permittivity (target value) Rectangular A Liquid Permittivity (measured value) normal (k=1) Combined standard uncertainty t-distribution >250 Expanded uncertainty k = >250 Page: 31 of 169 RFI Global Services Ltd.

32 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate-PCS 1900 Head Configuration 1g Standard υ + - Probability i Type Source of uncertainty Value Value Distribution Divisor ci Uncertainty (10g) or + u (%) - u (%) υ eff B Probe calibration normal (k=2) B Axial Isotropy normal (k=2) B Hemispherical Isotropy normal (k=2) B Spatial Resolution Rectangular B Boundary Effect Rectangular B Linearity Rectangular B Detection Limits Rectangular B Readout Electronics normal (k=2) B Response Time Rectangular B Integration Time Rectangular B RF Ambient conditions Rectangular B B B Probe Positioner Mechanical Restrictions Probe Positioning with Regard to Phantom Shell Extrapolation and integration / Maximum SAR evaluation Rectangular Rectangular Rectangular A Test Sample Positioning normal (k=1) A Device Holder uncertainty normal (k=1) B Phantom Uncertainty Rectangular B Drift of output power Rectangular B Liquid Conductivity (target value) Rectangular A Liquid Conductivity (measured value) normal (k=1) B Liquid Permittivity (target value) Rectangular A Liquid Permittivity (measured value) normal (k=1) Combined standard uncertainty t-distribution >200 Expanded uncertainty k = >200 Page: 32 of 169 RFI Global Services Ltd.

33 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate-PCS / GPRS1900 Body Configuration 1g Standard υ + - Probability i Type Source of uncertainty Value Value Distribution Divisor ci Uncertainty (10g) or + u (%) - u (%) υ eff B Probe calibration normal (k=2) B Axial Isotropy normal (k=2) B Hemispherical Isotropy normal (k=2) B Spatial Resolution Rectangular B Boundary Effect Rectangular B Linearity Rectangular B Detection Limits Rectangular B Readout Electronics normal (k=2) B Response Time Rectangular B Integration Time Rectangular B RF Ambient conditions Rectangular B B B Probe Positioner Mechanical Restrictions Probe Positioning with regard to Phantom Shell Extrapolation and integration / Maximum SAR evaluation Rectangular Rectangular Rectangular A Test Sample Positioning normal (k=1) A Device Holder uncertainty normal (k=1) B Phantom Uncertainty Rectangular B Drift of output power Rectangular B Liquid Conductivity (target value) Rectangular A Liquid Conductivity (measured value) normal (k=1) B Liquid Permittivity (target value) Rectangular A Liquid Permittivity (measured value) normal (k=1) Combined standard uncertainty t-distribution >200 Expanded uncertainty k = >200 Page: 33 of 169 RFI Global Services Ltd.

34 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March Specific Absorption Rate-Wi-Fi 2450 Body Configuration 1g Standard υ + - Probability i Type Source of uncertainty Value Value Distribution Divisor ci Uncertainty (10g) or + u (%) - u (%) υ eff B Probe calibration normal (k=2) B Axial Isotropy normal (k=2) B Hemispherical Isotropy normal (k=2) B Spatial Resolution Rectangular B Boundary Effect Rectangular B Linearity Rectangular B Detection Limits Rectangular B Readout Electronics normal (k=2) B Response Time Rectangular B Integration Time Rectangular B RF Ambient conditions Rectangular B B B Probe Positioner Mechanical Restrictions Probe Positioning with regard to Phantom Shell Extrapolation and integration / Maximum SAR evaluation Rectangular Rectangular Rectangular A Test Sample Positioning normal (k=1) A Device Holder uncertainty normal (k=1) B Phantom Uncertainty Rectangular B Drift of output power Rectangular B Liquid Conductivity (target value) Rectangular A Liquid Conductivity (measured value) normal (k=1) B Liquid Permittivity (target value) Rectangular A Liquid Permittivity (measured value) normal (k=1) Combined standard uncertainty t-distribution >200 Expanded uncertainty k = >200 Page: 34 of 169 RFI Global Services Ltd.

35 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Appendix 1. Test Equipment Used RFI No. Instrument Manufacturer Type No. Serial No. A034 A1097 Narda 20W Termination SMA Directional Coupler Narda 374BNM 8706 MiDISCO MDC None A1137 3dB Attenuator Narda A1174 A1328 A1182 Dielectric Probe Kit Handset Positioner Handset Positioner Agilent Technologies Schmid & Partner Engineering AG Schmid & Partner Engineering AG 85070C Modification Us SD 000 H01 DA Date Last Calibrated Calibrated as part of system Calibrated as part of system Calibrated as part of system Calibrated before use - - V3.0 None - - Cal. Interval (Months) A1234 Data Acquisition Electronics Schmid & Partner Engineering AG DAE Feb A MHz Dipole Kit Schmid & Partner Engineering AG D900V Feb A MHz Dipole Kit Schmid & Partner Engineering AG D1900V Feb A1238 SAM Phantom Schmid & Partner Engineering AG SAM b 001 Calibrated before use - A MHz Dipole Kit Schmid & Partner Engineering AG D2450V Feb A1378 Probe Schmid & Partner Engineering AG EX3 DV Feb A1497 Amplifier Mini-Circuits zhl-42w (sma) e Calibrated as part of system - A1566 SAM Phantom Schmid & Partner Engineering AG A1990 Digital Camera Samsung E515 SAM a 002 A db Attenuator Narda A23WC90 8A05431K Calibrated before use - - Calibrated as part of system A1531 AARONIA AG C1042 C1145 C1146 Network Analyzer Cable Agilent Cable Cable Rosenberger MICRO- COAX Rosenberger MICRO-COAX FA147A F FA147A F Calibrated as part of system Calibrated as part of system Page: 35 of 169 RFI Global Services Ltd.

36 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 RFI No. Instrument Manufacturer Type No. Serial No. Date Last Calibrated Cal. Interval (Months) G0528 Robot Power Supply Schmid & Partner Engineering AG DASY4 None Calibrated before use - G087 PSU Thurlby Thandar CPX Calibrated before use - M1015 Network Analyser Agilent Technologies 8753ES US Sept M1047 Robot Arm Staubli RX908 L F00/SD8 9A1/A/01 Calibrated before use - M1159 Signal Generator Agilent Technologies E8241A US Internal Checked 15 Dec M1071 Spectrum Analyzer Agilent HP8590E 3647U00514 (Monitoring use only) - M1270 Temperature/ Humidity/ Pressure Meter RS Components None None Internal Checked 31 March M1071 Spectrum Analyzer Agilent HP8590E 3647U00514 (Monitoring use only) - M1044 M265 M263 Diode Power Sensor Diode Power Sensor Dual Channel Power Meter Rohde & Schwarz NRV-Z / May Rohde & Schwarz NRV-Z / May Rohde & Schwarz NRVD / May S256 SAR Lab RFI Site 56 N/A Calibrated before use - Page: 36 of 169 RFI Global Services Ltd.

37 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 A.1.1. Calibration Certificates This section contains the calibration certificates and data for the Probe(s) and Dipole(s) used, which are not included in the total number of pages for this report. Page: 37 of 169 RFI Global Services Ltd.

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 Appendix 2. Measurement Methods A.2.1. Evaluation Procedure The Specific Absorption Rate (SAR) evaluation was performed in the following manner: a) (i) The evaluation was performed in an applicable area of the phantom depending on the type of device being tested. For devices worn about the ear during normal operation, both the left and right ear positions were evaluated at the centre frequency of the band at maximum power. The side, which produced the greatest SAR, determined which side of the phantom would be used for the entire evaluation. The positioning of the head worn device relative to the phantom was dictated by the test specification identified in section 3.1 of this report. (ii) For body worn devices or devices which can be operated within 20 cm of the body, the flat section of the SAM phantom was used were the size of the device(s) is normal. for bigger devices and base station the 2mm Oval phantom is used for evaluation. The type of device being evaluated dictated the distance of the EUT to the outer surface of the phantom flat section. b) The SAR was determined by a pre-defined procedure within the DASY4 software. The exposed region of the phantom was scanned near the inner surface with a grid spacing of 20mm x 20mm or appropriate resolution. c) A 5x5x7 matrix was performed around the greatest spatial SAR distribution found during the area scan of the applicable exposed region. SAR values were then calculated using a 3-D spline interpolation algorithm and averaged over spatial volumes of 1 and 10 grams. d) If the EUT had any appreciable drift over the course of the evaluation, then the EUT was reevaluated. Any unusual anomalies over the course of the test also warranted a re-evaluation. Page: 38 of 169 RFI Global Services Ltd.

77 Test Report Serial No: RFI/SAR/RP81001JD16A V3.0 Version 3.0 Issue Date: 24 March 2011 A.2.2. Specific Absorption Rate (SAR) Measurements to OET Bulletin 65 Supplement C: ( ) Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields SAR measurements were performed in accordance with Appendix D of the standard FCC OET Bulletin 65 Supplement C: 2001, IEEE 1528 and FCC KDB procedures, against appropriate limits for each measurement position in accordance with the standard. In some cases the FCC was contacted using a PBA or KDB process to ensure test is performed correctly. The test was performed in a shielded enclosure with the temperature controlled to remain between +18.0ºC and +25.0ºC. The tissue equivalent material fluid temperature was controlled to give a maximum variation of ± 2.0ºC Prior to any SAR measurements on the EUT, system validation and material dielectric property measurements were conducted. In the absence of a detailed procedure within the specification, system validation and material dielectric property measurements were performed in accordance with Appendix C and Appendix D of FCC OET Bulletin 65 Supplement C: 2001 and FCC KDB publication Following the successful system validation and material dielectric property measurements, a SAR versus time sweep shall be performed within 10 mm of the phantom inner surface. If the EUT power output is stable after three minutes then the measurement probe will perform a coarse surface level scan at each test position in order to ascertain the location of the maximum local SAR level. Once this area had been established, a 5x5x7 cube of 343 points (5 mm spacing in each axis 27g) will be centred at the area of concern. Extrapolation and interpolation will then be carried out on the 27g of tissue and the highest averaged SAR over a 10g cube determined. Once the maximum interpolated SAR measurement is complete; the coarse scan is visually assessed to check for secondary peaks within 50% of the maximum SAR level. If there are any further SAR measurements required, extra 5x5x7 cubes shall be centred on each of these extra local SAR maxima. At the end of each position test case a second time sweep shall be performed to check whether the EUT has remained stable throughout the test. Page: 39 of 169 RFI Global Services Ltd.