hd Columns Overview hd M-Series PointSource Stick hd C-Series hd ML-Series hd PL-Series PowerLine Stick hd M-Series 2 fullrange speaker

Transcription

1 hd Columns Overview True 1-Way Design. For superb and linear reproduction of a sound event from the fundamental to the highest audible frequencies conventional loudspeakers have to use different types of drivers to reproduce the whole frequency range. The result is incoherence and phase shifts in the mid-range due to different diaphragm masses, varying transient behaviors and decay times of the different sized drivers. According to the true 1-way design, the hd Columns are free of interference in the important mid-range because there are no phase delays since every speaker has the same signal and the same characteristics. The result is an outstanding sound quality in music and speech, extended dynamic and even coverage of audience areas. Customizations as Standard. Thanks to highly optimized manufacturing processes we are able to customize the outer appearance e.g. length and color and the inner equipping only within few days. The loudspeaker adapts the architecture. Not vice-versa. Coverage makes the Difference. The hd Columns may be configured either as LineSource or as PointSource speakers. This provides the advantage that the best dispersion characteristic can be selected for the induvidual application while preserving the same look. E.g. in an installation project there could be the main speakers carried out as LineSources and the Delay speakers as PointSources - with the same outer appearance for the client. Suitable for any Circumstances. The full-length U-slot on the back of the aluminum profile enables the possibility to insert M6 square nuts to fix any wall mounting adaptor or use the hd M6 square nut plate for quick and easy set-up and release of the tilt and swivel stand adaptor. Upon request there may be a 3/8 thread or a stand adaptor flange on the bottom with a Neutrik NL4MP for input connection in mobile applications whereas a Commercial Stick PointSource usage with any amplifier integrated frequency- and phasenoptimized crossover no DSP processing necessary coverage 100 x 50 LineSource Stick LineSource coverage 100 x 20 hd M-Series PointSource Stick PointSource coverage 100 x 50 hd PL-Series LineSource 3 fullrange speakers coverage 80 x 15 terminal block is on the inside for fixed installations. M6 threads on top and bottom plate with L-angles may be used for fixed installations with minimum space requirements.the protective design grill with deposited acoustic foam ensure an unobtrusive integration into any room architecture. hd C-/M-/ML-Series 2 fullrange speakers hd PL-Series 3 fullrange speakers Series Type Transducers Coverage hor x ver passivexo 100V Version (optional) RAL-Painting / Custom length Ø (mm) Yes Yes PointSource 100 x 50 hd M-Series 2 fullrange speaker - Yes x 20 - Yes Yes LineSource hd PL-Series 3 fullrange speakers 80 x Harmonic Design 10 Harmonic Design hd Columns 11

2 The can be easily installed and mounted flexible. The loudspeaker can be aligned best with the decent spherical joint wall mount or with L-angles and two M6 threads on top and bottom with minimum space requirement. If wall mouting is not possible, the speakers may be used with a design stand or microphone stand with an 3/8 -thread on the bottom plate. in existing or newly designed, distributed systems may be realized with the optional 100V-version. Up-todate transformers guarantee great audio performace even over large distances and with small cable cross sections. Commercial Stick The is a product family of high-end Commercial Sticks specially designed for the usage with standard A/V-receivers and amplifiers. The lightweight and elegant column speakers with their exclusive aluminum enclosure can be integrated seamless into any room architecture. For best integration custom sizes i.e. various equipping or lengths and colors are available. Multiple power taps enable the adjustment of sound level. The reason for introducing the is that modern flat screen TVs are equipped with the latest display technologies but their sound transmission suffers from the ultra slim housings. To solve the sound issues there is the need for an external sound system to achieve clear dialogs, bombastic 5.1 or 3D cinema sound plus a transparent high-fidelity stereo sound in 2.1 applications. It consists of hd C2, hd C4 and hd C8. During development of this series a big focus was to maintain the natural and dynamic reproduction of music for a unique listening experience. A passive frequency- and phase-optimized crossover hd SurroundCinema that is integrated into the aluminum profile allows the operation directly with the power output of standard A/Vreceivers or control systems. The CommercialSticks is according to the true 1-way design free of interference in the important mid-range because there are no phase delays in the crossover that typical 2-way systems have. The result is an outstanding sound quality in music and speech, extended dynamic and even coverage of audience areas. This is how surround-effects reach an unprecedented level of depth, spatial reproduction and audiophile class. Extremely powerful subwoofer with up to 1000W extend the low frequency sound experience down to the subsonic range. Features usable with standard amplifiers frequency- and phase-optimized crossover elegant design precise and smooth coverage radiation pattern 100 x 50 superb speech intellegibilty decent integration into architecture airports, hotels, stations, home cinema, surround, conferece rooms, AV installations, multimedia applications, congress rooms, houses of worship, distributed systems RAL colours, various mounting solutions, 100V-version, custom sizes C2 PointSource 2x 2 8 Ω 50 / 100 W 89 db 113 db 180 Hz - 22 khz 2 kg 86 x 205 x 86 C4 PointSource 4x 2 4 / 16 Ω 100 / 200 W 92 db 116 db 150 Hz - 22 khz 4 kg 86 x 545 x 86 C8 PointSource 8x 2 8 / 32 Ω 200 / 400 W 95 db 119 db 120 Hz - 22 khz 6 kg 86 x 1005 x 86 Harmonic Design 12 Harmonic Design 13

3 hd M-Series PointSource Stick The hd M-Series are design column speakers with point source wave propagation characteristics. The elegant enclosures are made out of strength aluminum to prevent resonances in the audible frequency range and is available with different surfaces e.g. powder coated, anodized or varnished and numerous colors. This guarantees an unobtrusive integration into churches, conference rooms or theatres. The hd M-Series consists of the ultra compact model hd M2 that is equipped with two 2 drivers for nearfield or speech applications and the slightly larger hd M4 as a fill loudspeaker in church applications or the hd M8 as a very compact main loudspeaker in conference or music applications. The amount of integrated drivers is easily noticeable in the product suffix to get For superb and linear reproduction of a sound event from the fundamental to the highest audible frequencies conventional loudspeakers have to use different types of drivers to reproduce the whole frequency range. The result is incoherence and phase shifts in the mid-range due to different diaphragm masses, varying transient behaviors and decay times of the different sized drivers. According to the true 1-way design, the M-Series is free of interference in the important mid-range because there are no phase delays since every speaker has the same signal and the same characteristics. The result is an outstanding sound quality in music and speech, extended dynamic and even coverage of audience areas. a quick identification for the end-user and design engineer of the size, application and power capacity of the loudspeakers. All loudspeakers can be used in distributed high voltage applications with the 100V-option which is also available. The main difference between the and the hd M-Series is the different vertical dispersion and wave propagation characteristics. Whenever there is a much wider vertical dispersion needed than available with the ML-Series with their beamed sound, then hd M-Series is the right choice with their wide vertical dispersion using the same drivers and the same outer appearance as the hd ML-Series. All loudspeakers can be used in distributed high voltage applications with the 100V-option. Up-to-date transformers guarantee great audio performace even over large distances and with small cable cross sections. Multiple power taps enable the adjustment of level. External processing is required. Various mounting solutions are available with the standardized U-slot from bottom to top at the rear of the column speaker. M6 square nuts can be inserted easily to use tilt and swivel wall mounts or stand adaptors for fixed installations or mobile use. A standard Neutrik NL4MP is located at the bottom plate for input connection in mobile applications whereas a terminal block is on the inside for fixed installations. The protective design grill with deposited acoustic foam is also available in the same finish like the housings to ensure perfect protection against splash water or damage and unobtrusive integration into any room architecture. The hd M-Series is also available in custom lengths to fulfill every projects needs. point source characteristics elegant design precise and smooth coverage radiation pattern 100 x 50 superb speech intellegibilty decent integration into architecture conference rooms, houses of worship, concert halls, live music, AV installations RAL colours, various mounting solutions, 100V-version, custom sizes suggested subwoofers hd Sub12, hd P12stereo, hd Sub15, hd P15 M2 PointSource 2x 2 8 Ω 50 / 70 W 89 db 113 db 200 Hz - 20 khz 2 kg 86 x 205x 86 M4 PointSource 4x 2 4 / 16 Ω 100 / 140 W 92 db 116 db 180 Hz - 20 khz 3 kg 86 x 545 x 86 M8 PointSource 8x 2 8 / 32 Ω 200 / 280 W 95 db 119 db 160 Hz - 20 khz 5 kg 86 x 1085 x 86 Harmonic Design 14 Harmonic Design hd M-Series 15

4 For mobile applications the hd mouting adaptor plate is recommended that the tilt and swivel adaptor may be setted up and released within few seconds. According to the true 1-way design, the ML-Series is free of interference in the important mid-range because there are no phase delays in the crossover that typical 2-way systems have. The result is an outstanding sound quality in music and speech, extended dynamic and even coverage of audience areas. The hd ML-Series is fully compatible to the Harmonic Design system concept and can be effectively combined with the active subwoofers hd P12, hd P15 and hd P18. LineArray Stick The is a product family of very compact LineArray Systems, specially designed for top quality reproduction of both, music and speech. The lightweight and elegant speakers can be installed and set up in only a few seconds. The speaker column s slim, unobtrusive design integrates seamless into room architecture and stage areas appealing to All loudspeakers can be used in distributed high voltage applications with the 100V-option. Upon request there may be a 3/8 thread or a stand adaptor flange on the bottom with a Neutrik NL4MP for input connection in mobile applications. For fixed installations a terminal block is inside with an almost invisible cable entrance whole on the back. The full-length U-slot on the back of the aluminum profile enables the possibility to insert M6 square nuts to fix any wall mounting adaptor. event organizers, agencies and audiences. The consists of the hd ML16 and hd ML24 as standard sized column loudspeakers. According to the modular system it s possible to built even larger columns to satisfy every applications needs. In the hd ML16 and hd ML24 sixteen respectively twenty-four special designed 2 neodymium drivers produce sound with accurate cylindrical dispersion characteristics in the whole operating frequency range and up to the highest audible frequencies. The long throw of up to 35m and smooth horizontal coverage of 100 makes the a decent and powerful loudspeaker for superior audio environments. The 2 drivers are due to their small diaphram weight and almost same size as the human vocal cords the best choice for the reproduction of human voice in the most difficult applications such as houses of worship, conferencing, airports, train stations and live music. Safe flown applications are possible with an optional clamp, half coupler or similar items for mounting on top of the loudspeaker column. Robust padded bags for transportation are offered separately and provide adequate protection for the equipment. cylindrical wave progagation perfect sound & excellent dynamics wide coverage 100 x 15 superb speech intelligibility best integration into room architecture live music, DJ, houses of worship, museums conference rooms, hotels, airports and stations AV installations, mobile use RAL colours, various mounting solutions, 100V-version custom designed sizes e.g. ML32, ML40 or ML48 available ML8 LineArray Stick 8x 2 8 Ω 200 / 280 W 89 db 119 db 180 Hz - 20 khz 4 kg 86 x 545 x 86 ML16 LineArray Stick 16x 2 4 Ω 400 / 560 W 92 db 123 db 160 Hz - 20 khz 6 kg 86 x 1085 x 86 ML24 LineArray Stick 24x 2 6 Ω 600 / 840 W 95 db 125 db 140 Hz - 20 khz 8 kg 86 x 1570 x 86 ML32 LineArray Stick 32x 2 8 Ω 800 / 1120 W 96 db 127 db 120 Hz - 20 khz 10 kg 86 x 2000 x 86 Harmonic Design 16 Harmonic Design 17

5 hd PL-Series The hd PL-Series extends the Harmonic Design LineArray Stick portfolio with a more powerful loudspeaker series with a comparable nice outer appearance as the. Lightweight enclosures using modern materials from airspace combined with groundbreaking new designed 3 drivers for a long lasting and reliable column speakers with outstanding sound reproduction of music and speech in even larger applications. The elegant s are set up in only a few seconds and are very easy to handle. There are customer specific length available according to the modular design of every Harmonic Design column speaker series to fulfill every applications needs. Perfect integration into room architecture and stage scenery with various colors and sizes makes the hd PL-Series the first choice of architects and system integrators all over the world. For mobile use the The hd PL16 has the advantage of a shorter total height in comparison to the hd ML24 with same weight that simplifies the usage in locations with low ceilings and transportation in cars. The increased directivity of the 3 -chassis narrows the horizontal radiation angle to 80 and ensures that the sound energy concentrates and reaches a longer distance. Having a larger diaphram area than the hd ML24 enables greater SPL in the low-mid frequency band and more punch. system is designated to be used with modular active plug&play system subwoofers of the hd P-Series. The hd PL-Series column speakers are upon request equipped with a 35mm stand adaptor flange on the bottom with a The hd PL12 and hd PL16 are the standard models of the hd PL-Series. Equipped with twelve resp. sixteen new designed hd 3 drivers the hd PL-Series reproduces a coherent sound within a cylindrical wave propagation to the highest audible frequencies. The resulting longer throw distance with less loss over distance and improved speech intelligibility thank to the directed wave propagation compared to other column speakers predestines the hd PL-Series s for the usage in Neutrik NL4MP or with a rearside mounted tilt and swivel stand adaptor for mobile applications. The full-length U-slot on the back of the aluminum profile enables the possibility to insert M6 square nuts to fix any wall mounting adaptor. Safe flown applications are possible with an optional clamp, half coupler or similar items for mounting on top of the loudspeaker column. Robust padded bags for transportation are offered separately and provide adequate protection for the equipment. difficult acoustical environments such as churches, stations, airports or concert halls where excellent performance is needed. cylindrical wave progagation perfect sound & excellent dynamics high SPL wide coverage 80 x 10 superb speech intelligibility best integration into room architecture live music, DJ, houses of worship, museums, conference, hotels, airports, stations, AV installations, mobile use RAL colours, various mounting solutions, 100V-version custom designed sizes suggested Subwoofer hd Sub18, hd P18 hd PL16 PL12 12x 3 6 Ω 450 / 630 W 94 db 124 db 140 Hz - 18 khz 7 kg 108 x 1029 x 104 PL16 16x 3 4 Ω 600 / 840 W 96 db 127 db 130 Hz - 18 khz 9 kg 108 x 1353 x 104 Harmonic Design 18 Harmonic Design hd PL-Series 19